Assembling the 2D-3D-2D Heterostructure of Quasi-2D Perovskites for High-Performance Solar Cells.

Quasi-two-dimensional (quasi-2D) layered perovskites with mixed dimensions offer a promising avenue for stable and efficient solar cells. However, randomly distributed three-dimensional (3D) perovskites near the film surface limit the device performance of quasi-2D perovskites due to increased nonradiative recombination and ion migration. Herein, we construct a 2D (n = 4 top)-3D-2D (n = 2 bottom) heterostructure of quasi-2D perovskites by using 3-chlorobenzylamine iodine, which can effectively reduce defect density and restrain ion migration. A champion efficiency of 22.22% for quasi-2D perovskite solar cells is achieved due to remarkably reduced nonradiative voltage loss and increased electron extraction. Additionally, the 2D-3D-2D perovskite solar cells also exhibit excellent thermal and humidity stabilities, retaining over 90 and 85% of the initial efficiencies after 2000 h under a heat stress of 65 °C and at air ambient of ∼50% humidity, respectively. Our results provide a general approach to tune perovskite films for suppressing ion migration and achieving high-performance perovskite solar cells.

Highly Stable CsPbBr3@MoS2 Nanostructures: Synthesis and Optoelectronic Properties Toward Implementation into Solar Cells.

Halide perovskites (HPs) have gained significant interest in the scientific and technological sectors due to their unique optical, catalytic, and electrical characteristics. However, the HPs are prone to decomposition when exposed to air, oxygen, or heat. The instability of HP materials limits their commercialization, prompting significant efforts to address and overcome these limitations. Transition metal dichalcogenides, such as MoS2, are chemically stable and are suitable for electronic, optical, and catalytic applications. Moreover, it can be used as a protective media or shell for other nanoparticles. In this study, a novel CsPbBr3@MoS2 core-shell nanostructure (CS-NS) is successfully synthesized by enveloping CsPbBr3 within a MoS2 shell for the first time. Significant stability of CS-NSs dispersed in polar solvents for extended periods is also demonstrated. Remarkably, the hybrid CS-NS exhibits an absorption of MoS2 and quenching of the HP's photoluminescence, implying potential charge or energy transfer from HPs to MoS2. Using finite difference time domain simulations, it is found that the CS-NSs can be utilized to produce efficient solar cells. The addition of a MoS2 shell enhances the performance of CS-NS-based solar cells by 220% compared to their CsPbBr3 counterparts. The innovative CS-NS represents important progress in harnessing HPs for photovoltaic and optoelectronic applications.

Enhancing Efficiency and Durability of Perovskite Solar Cells with Chlorine-Functionalized Fully Conjugated Porous Aromatic Framework.

Non-radiative recombination, caused by trap states, significantly hampers the efficiency and stability of perovskite solar cells (PSCs). The emerging porous organic polymers (POPs) show promise as a platform for designing novel defect passivation agents due to their rigid and porous structure. However, the POPs reported so far lack either sufficient stability or clear sites of interactions with the defects. Herein, two chlorine-functionalized, fully conjugated porous aromatic frameworks (PAFs) were constructed via a decarbonylation reaction. The chlorinated PAFs feature unique long-range conjugated networks bearing multiple chlorine atoms, significantly improving the photovoltaic performance and stability of doped solar cells. Combined experimental and theoretical analyses confirmed the strong passivation effects of conjugated structure to the defect through Cl sites. Specifically, PAF-159, bearing a triphenylamine moiety, demonstrated stronger Cl-Pb bonding and higher passivation efficiency due to the presence of π* anti-bonding orbitals, which elevate the HOMO energy level and facilitate Cl-Pb charge transfer. Consequently, we obtained high-performance PAF-159-doped devices with advanced PCE (24.3%), good storage stability (retaining 86% after 3000 hours), and good long-term operational stability (retaining 92% after 350 hours).

Unveiling the Effect of Cooling Rate on Grown-in Defects Concentration in Polycrystalline Perovskite Films for Solar Cells with Improved Stability.

Numerous efforts are devoted to reducing the defects at perovskite surface and/or grain boundary; however, the grown-in defects inside grain is rarely studied. Here, the influence of cooling rate on the point defects concentration in polycrystalline perovskite film during heat treatment processing is investigated. With the combination of theoretical and experimental studies, this work reveals that the supersaturated point defects in perovskite films generate during the cooling process and its concentration improves as the cooling rate increases. The supersaturated point defects can be minimized through slowing the cooling rate. As a result, the optimized FAPbI3 polycrystalline films achieve a superior carrier lifetime of up to 12.6 µs and improved stability. The champion device delivers a 25.47% PCE (certified 24.7%) and retain 90% of their initial value after >1100 h of operation at the maximum power point. These results provide a fundamental understanding of the mechanisms of grown-in defects formation in polycrystalline perovskite film.

Imidazole-Based Ionic Liquid Engineering for Perovskite Solar Cells with High Efficiency and Excellent Stability.

Despite the remarkable progress of perovskite solar cells (PSCs), the substantial inherent defects within perovskites restrict the achievement of higher efficiency and better long-term stability. Herein, we introduced a novel multifunctional imidazole analogue, namely, 1-benzyl-3-methylimidazolium bromide (BzMIMBr), into perovskite precursors to reduce bulk defects and inhibit ion migration in inverted PSCs. The electron-rich environment of -N- in the BzMIMBr structure, which is attributed to the electron-rich adjacent benzene ring-conjugated structure, effectively passivates the uncoordinated Pb2+ cations. Moreover, the interaction between the BzMIMBr additive and perovskite can effectively hinder the deprotonation of formamidinium iodide/methylammonium iodide (FAI/MAI), extending the crystallization time and improving the quality of the perovskite precursors and films. This interaction also effectively inhibits ion migration to subsequent deposited films, leading to a noteworthy decrease in trap states. Various characterization studies show that the BzMIMBr-doped films exhibit superior film morphology and surface uniformity and reduced nonradiative carrier recombination, consequently enhancing crystallinity by reducing bulk/surface defects. The PSCs fabricated on the BzMIMBr-doped perovskite thin film exhibit a power conversion efficiency of 23.37%, surpassing that of the pristine perovskite device (20.71%). Additionally, the added BzMIMBr substantially increased the hydrophobicity of perovskite, as unencapsulated devices still retained 93% of the initial efficiency after 1800 h of exposure to air (45% relative humidity).

Gas Molecule Assisted All-Inorganic Dual-Interface Passivation Strategy for High-Performance Perovskite Solar Cells.

The trap states at both the upper and bottom interfaces of perovskite layers significantly impact non-radiative carrier recombination. The widely used solvent-based passivation methods result in the disordered distribution of surface components, posing challenges for the commercial application of large-area perovskite solar cells (PSCs). To address this issue, a novel NH3 gas-assisted all-inorganic dual-interfaces passivation strategy is proposed. Through the gas treatment of the perovskite surface, NH3 molecules significantly enhanced the iodine vacancy formation energy (1.54 eV) and bonded with uncoordinated Pb2+ to achieve non-destructive passivation. Meanwhile, the reduction of the film defect states is accompanied by a decrease in the work function, which promotes carrier transport between the interface. Further, a stable passivation layer is constructed to manage the bottom interfacial defects using inorganic potassium tripolyphosphate (PT), whose ─P═O group effectively mitigated the charged defects and lowered the carrier transport barriers and nucleation barriers of PVK, while the gradient distribution of K+ improved the crystalline quality of PVK film. Based on the dual-interface synergistic effect, the optimal MA-contained PSCs with an effective area of 0.1 cm2 achieved an efficiency of 24.51% and can maintain 90% of the initial value after aging (10-20% RH and 20 °C) for 2000 h.

Blade-Coating of High Crystallinity Cesium-Formamidinium Perovskite Formulations.

Up-scalable coating processes need to be developed to manufacture efficient and stable perovskite-based solar modules. In this work, we combine two Lewis base additives (N,N'-dimethylpropyleneurea and thiourea) to fabricate high-quality Cs0.15FA0.85PbI3 perovskite films by blade-coating on large areas. Selected-area electron diffraction patterns reveal a minimization of stacking faults in the α-FAPbI3 phase for this specific cesium-formamidinium composition in both spin-coated and blade-coated perovskite films, demonstrating its scaling potential. The underlying mechanism of the crystallization process and the specific role of thiourea are characterized by Fourier transform infrared spectroscopy and in situ optical absorption, showing clear interaction between thiourea and perovskite precursors and halved film-formation activation energy (from 114 to 49 kJ/mol), which contribute to the obtained specific morphology with the formation of large domain sizes on a short time scale. The blade-coated perovskite solar cells demonstrate a maximum efficiency of approximately 16.9% on an aperture area of 1 cm2.

Customizing Aniline-Derived Molecular Structures to Attain beyond 22% Efficient Inorganic Perovskite Solar Cells.

The characteristics of the soft component and the ionic-electronic nature in all-inorganic CsPbI3-xBrxperovskite typically lead to a significant number of halide vacancy defects and ions migration, resulting in a reduction in both photovoltaic efficiency and stability. Herein, we present a tailored approach in which both anion-fixation and undercoordinated-Pb passivation are achieved in situ during crystallization by employing a molecule derived from aniline, specifically 2-methoxy-5-trifluoromethylaniline (MFA), to address the above challenges. The incorporation of MFA into the perovskite film results in a pronounced inhibition of ion migration, a significant reduction in trap density, an enhancement in grain size, an extension of charge carrier lifetime, and a more favorable alignment of energy levels. These advantageous characteristics contribute to achieving a champion power conversion efficiency (PCE) of 22.14% for the MFA-based CsPbI3-xBrx perovskite solar cells (PSCs), representing the highest efficiency reported thus far for this type of inorganic metal halide perovskite solar cells, to the best of our knowledge. Moreover, the resultant PSCs exhibits higher environmental stability and photostability. This strategy is anticipated to offer significant advantages for large-area fabrication, particularly in terms of simplicity.

Characterization of fully-evaporated perovskite solar cells and photodetectors under high-intensity pulsed proton irradiation.

This study investigates the impact of proton irradiation on perovskite devices fabricated fully through vacuum deposition. Exposure to irradiation induces changes in both electrical and optical properties. The analysis reveals that the main factors influencing the observed performance changes in solar cells are a significant reduction in shunt resistance and a minor increase in series resistance, with minimal alterations in recombination dynamics. Remarkably, the devices maintain promising photodetector characteristics both before and after proton irradiation, particularly in a self-powered mode without a reverse bias. These findings provide valuable insights into the resilience of vacuum-deposited perovskite devices against ionizing radiation, highlighting their potential for applications in radiation-prone environments, such as the nuclear industry or space exploration.

Room-Temperature Ripening Enabled by Hygroscopic Salts for Hole-conductor-free Printable Perovskite Solar Cells with Efficiency Over 20.

Solution-processed perovskite films generally possess small grain sizes and high density of grain boundaries, which intensify non-radiative recombination of carriers and limits the power conversion efficiency (PCE) of solar cells. In this study, we report the room-temperature ripening enabled by the synergy of hygroscopic salts and moisture in air for efficient hole-conductor-free printable mesoscopic perovskite solar cells (p-MPSCs). Treating perovskite films with proper hygroscopic salts in damp air induces obvious secondary recrystallization, which coarsens the grains size from hundreds of nanometers to several micrometers. It's proposed that the hygroscopic salt at grain boundaries could absorb moisture and form a complex which could not only serve as mass transfer channel but also assist in the dissolution of perovskite grains. This activates mass transfer between small grains and large grains since they possess different solubilities, and thus ripens the perovskite film. Consequently, p-MPSCs treated with the hygroscopic salt of NH4SCN show an improved power conversion efficiency of 20.13% from 17.94%, and maintain >98% of the initial efficiency under maximum power point tracking at 55±5°C for 350 hours.

Towards the 10-Year Milestone of Monolithic Perovskite/Silicon Tandem Solar Cells.

The perovskite/silicon tandem solar cell represents one of the most promising avenues for exceeding the Shockley-Queisser limit for single-junction solar cells at a reasonable cost. Remarkably, its efficiency has rapidly increased from 13.7% in 2015 to 34.6% in 2024. Despite the significant research efforts dedicated to this topic, the "secret" to achieving high-performance perovskite/silicon tandem solar cells seems to be confined to a few research groups. Additionally, the discrepancies in preparation and characterization between single-junction and tandem solar cells continue to impede the transition from efficient single-junction to efficient tandem solar cells. This review first revisits the key milestones in the development of monolithic perovskite/silicon tandem solar cells over the past decade. Then, a comprehensive analysis of the background, advancements, and challenges in perovskite/silicon tandem solar cells is provided, following the sequence of the tandem fabrication process. The progress and limitations of the prevalent stability measurements for tandem devices are also discussed. Finally, a roadmap for designing efficient, scalable, and stable perovskite/silicon tandem solar cells is outlined. This review takes the growth history into consideration while charting the future course of perovskite/silicon tandem research.

Large Orientation Angle Buried Substrate Enables Efficient Flexible Perovskite Solar Cells and Modules.

Flexible perovskite solar cells (f-PSCs) have emerged as potential candidates for specific mechanical applications owing to their high foldability, efficiency, and portability. However, the power conversion efficiency (PCE) of f-PSC remains limited by the inferior contact between perovskite and flexible buried substrate. Here, an asymmetric π-extended self-assembled monolayer (SAM) (4-(9H-dibenzo[a,c]carbazol-9-yl)butyl)phosphonic acid (A-4PADCB) is reported as a buried substrate for efficient inverted f-PSCs. Employing this design strategy, A-4PADCB exhibits a significant orientation angle away from the surface normal, homogenizing the distribution of contact potentials. This enhancement improves the SAM/perovskite interface quality, controlling the growth of favorable perovskite films with low defect density and slight tensile stress. Integration of A-4PADCB into small-area f-PSCs and large-area flexible perovskite solar modules with an aperture area of 20.84 cm2 achieves impressive PCEs of up to 25.05% and 20.64% (certified 19.51%), respectively. Moreover, these optimized A-4PADCB-based f-PSCs possess enhanced light, thermal, and mechanical stability. This research paves a promising avenue toward the design of SAM-buried substrates with a large orientation angle, regulating perovskite growth, and promoting the commercialization of large-area flexible perovskite photovoltaics.

Natural Chelating Agent-Treated Electron Transfer Layer for Friendly Environmental and Efficient Perovskite Solar Cells.

In perovskite solar cells (PSCs), the electron transfer layer (ETL) characteristics have significant effects on the photoelectric conversion efficiency (PCE) of the devices. Herein, a natural chelating agent polymer polyaspartic acid (PASP) is doped into the SnO2 precursor solution attributed to a strong interaction between PASP molecules and SnO2, which strengthens the interface contact and passivates the vacancy oxygen trap of the obtained SnO2 ETL, thus promoting the transfer of electrons. In addition, PASP can also regulate the growth of perovskite crystals, leading to an improved crystal quality of the perovskite films. Meanwhile, there is an excellent chelate anchoring of PASP to uncoordinated Pb2+, facilitating the reduction of trap defects at the interface, improving the stability of device, and suppressing the leakage of toxic Pb. Finally, the photovoltaic performance of the optimized device was greatly improved, and the PCE was increased from 21.22 to 23.49%, with outstanding environmental stability. This work provides an inexpensive and efficient treatment strategy that improves the performance and stability of friendly environmental PSCs.

Water-Based Recycling Process of FTO/SnO2 Substrate for Sustainable Perovskite Solar Cell Technology.

Fluorine-doped tin oxide (FTO) substrate is an important and expensive component in perovskite solar cells (PSCs), which accounts for up to 40% of a typical PSC raw material cost. In this study, we investigated the recyclability of SnO2/FTO in PSCs by washing the spent PSCs using different solvent such as dimethylformamide (DMF), dimethylsulfoxide (DMSO), acetone, water, and acetone/water mixture. Characterisation of properties of the SnO2/FTO substrates recovered from the PSC show the surface wettability of SnO2/FTO is largely unchanged with water washing while a higher hydrophobicity is obtained with organic solvent washing. Comparison of electronic properties of the SnO2/FTO substrate shows a downward shift of the conduction band by 180 meV with water washing, creating favourable energy alignment with adjacent perovskite for efficient interfacial charge injection. Consequently, PSCs using the water-based recycled SnO2/FTO substrates produced a high power conversion efficiency (PCE) of 19.33% which is comparable to the device using fresh SnO2/FTO substrate (PCE = 19.85%). Furthermore, we demonstrated that the water washing process could retain property of SnO2/FTO substrate for decent PSC performance up to four recycling cycles. This study opens new avenues towards recycling of valuable FTO substrates in PSCs for increased sustainability and cost-effectiveness.

Tri-Step Water-Assisted Strategy for Suppressing Cs4PbBr6 Phase in Printable Carbon-Based CsPbBr3 Solar Cells to Achieve High Stability.

Often deemed the "natural nemesis" of perovskites, water molecules have been largely circumvented by the majority of researchers in the field of perovskite solar cells. This has resulted in significant hurdles in investigating the beneficial impacts of water molecules on perovskite crystallization. Herein, it is found that by utilizing ethanol with minimal water content and subjecting all-inorganic perovskite to three distinct annealing temperatures within the same solvent, the residual CsBr can be effectively removed, and the formation of the Cs4PbBr6 phase can be curtailed. By selecting an optimal water content, substantial improvements are observed in the crystalline quality of CsPbBr3, the perovskite/carbon interface, and the mesoporous filling effect. The Urbach energy (Eu) is reduced from 38.96 to 35.59 meV, and the defect density decreased from 4.16 × 1014 to 3.39 × 1014 cm-3. As a result, the power conversion efficiency (PCE) improved from 7.55% in the control group to 9.37%. Under severe environmental conditions with a temperature (T) of 85 °C and a relative humidity (RH) of 40%, tracking tests over 1200 h retained 89.3% of the initial PCE. This research signifies a breakthrough in the fabrication of highly stable and efficient all-inorganic printable mesoscopic perovskite solar cells.

Chemical Bath Deposited Antimony Oxide Thin Films for Efficient Perovskite Solar Cells.

The metal oxide electron transport layers (ETLs) of n-i-p perovskite solar cells (PSCs) are dominated by TiO2 and SnO2, while the efficacy of the other metal oxide ETLs still lags far behind. Herein, an emerging, economical, and environmentally friendly metal oxide, antimony oxide (Sb2Ox, x = 2.17), prepared by chemical bath deposition is reported as an alternative ETL for PSCs. The deposited Sb2Ox film is amorphous and very thin (∼10 nm) but conformal on rough fluorine-doped tin oxide substrates, showing matched energy levels, efficient electron extraction, and then reduced nonradiative recombination in PSCs. The champion PSC based on the Sb2Ox ETL delivers an impressive power conversion efficiency of 24.7% under one sun illumination, which represents the state-of-the-art performance of all metal oxide ETL-based PSCs. Additionally, the Sb2Ox-based devices show improved operational and thermal stability compared to their SnO2-based counterparts. Armed with these findings, we believe this work offers an optional ETL for perovskites-based optoelectronic devices.

Defect Engineering at Buried Interface of Perovskite Solar Cells.

Perovskite solar cells (PSC) have developed rapidly since the past decade with the aim to produce highly efficient photovoltaic technology at a low cost. Recently, physical and chemical defects at the buried interface of PSC including vacancies, impurities, lattice strain, and voids are identified as the next formidable hurdle to the further advancement of the performance of devices. The presence of these defects has unfavorably impacted many optoelectronic properties in the PSC, such as band alignment, charge extraction/recombination dynamics, ion migration behavior, and hydrophobicity. Herein, a broad but critical discussion on various essential aspects related to defects at the buried interface is provided. In particular, the defects existing at the surface of the underlying charge transporting layer (CTL) and the bottom surface of the perovskite film are initially elaborated. In situ and ex situ characterization approaches adopted to unveil hidden defects are elucidated to determine their influence on the efficiency, operational stability, and photocurrent-voltage hysteresis of PSC. A myriad of innovative strategies including defect management in CTL, the introduction of passivation materials, strain engineering, and morphological control used to address defects are also systematically elucidated to catalyze the further development of more efficient, reliable, and commercially viable photovoltaic devices.

Minimizing Interfacial Energy Loss and Volatilization of Formamidinium via Polymer-Assisted D-A supramolecular Self-Assembly Interface for Inverted Perovskite Solar Cells with 25.78% Efficiency.

2D perovskite passivation strategies effectively reduce defect-assisted carrier nonradiative recombination losses on the perovskite surface. Nonetheless, severe energy losses are causing by carrier thermalization, interfacial nonradiative recombination, and conduction band offset still persist at heterojunction perovskite/PCBM interfaces, which limits further performance enhancement of inverted heterojunction PSCs. Here, 5,10,15,20-tetrakis(pentafluorophenyl)porphyrin (5FTPP) is introduced between 3D/2D perovskite heterojunction and PCBM. Compared to tetraphenylporphyrin without electron-withdrawing fluoro-substituents, 5FTPP can self-assemble with PCBM at interface into donor-acceptor (D-A) complex with stronger supramolecular interaction and lower energy transfer losses. This rapid energy transfer from donor (5FTPP) to acceptor (PCBM) within femtosecond scale is demonstrated to enlarge hot carrier extraction rates and ranges, reducing thermalization losses. Furthermore, the incorporation of polystyrene derivative (PD) reinforces D-A interaction by inhibiting self-π-π stacking of 5FTPP, while fine-tuning conduction band offset and suppressing interfacial nonradiative recombination via Schottky barrier, dipole, and n-doping. Notably, the multidentate anchoring of PD-5FTPP with FA+, Pb2+, and I- mitigates the adverse effects of FA+ volatilization during thermal stress. Ultimately, devices with PD-5FTPP achieve a power conversion efficiency of 25.78% (certified: 25.36%), maintaining over 90% of initial efficiency after 1000 h of continuous illumination at the maximum power point (65 °C) under ISOS-L-2 protocol.

The Role of Optimal Electron Transfer Layers for Highly Efficient Perovskite Solar Cells-A Systematic Review.

Perovskite solar cells (PSCs), which are constructed using organic-inorganic combination resources, represent an upcoming technology that offers a competitor to silicon-based solar cells. Electron transport materials (ETMs), which are essential to PSCs, are attracting a lot of interest. In this section, we begin by discussing the development of the PSC framework, which would form the foundation for the requirements of the ETM. Because of their exceptional electronic characteristics and low manufacturing costs, perovskite solar cells (PSCs) have emerged as a promising proposal for future generations of thin-film solar energy. However, PSCs with a compact layer (CL) exhibit subpar long-term reliability and efficacy. The quality of the substrate beneath a layer of perovskite has a major impact on how quickly it grows. Therefore, there has been interest in substrate modification using electron transfer layers to create very stable and efficient PSCs. This paper examines the systemic alteration of electron transport layers (ETLs) based on electron transfer layers that are employed in PSCs. Also covered are the functions of ETLs in the creation of reliable and efficient PSCs. Achieving larger-sized particles, greater crystallization, and a more homogenous morphology within perovskite films, all of which are correlated with a more stable PSC performance, will be guided by this review when they are developed further. To increase PSCs' sustainability and enable them to produce clean energy at levels previously unheard of, the difficulties and potential paths for future research with compact ETLs are also discussed.

A Density Functional Theory Study of the Physico-Chemical Properties of Alkali Metal Titanate Perovskites for Solar Cell Applications.

The urgent need to shift from non-renewable to renewable energy sources has caused widespread interest in photovoltaic technologies that allow us to harness readily available and sustainable solar energy. In the past decade, polymer solar cells (PSCs) and perovskite solar cells (Per-SCs) have gained attention owing to their low price and easy fabrication process. Charge transport layers (CTLs), transparent conductive electrodes (TCEs), and metallic top electrodes are important constituents of PSCs and Per-SCs, which affect the efficiency and stability of these cells. Owing to the disadvantages of current materials, including instability and high cost, the development of alternative materials has attracted significant attention. Owing to their more flexible physical and chemical characteristics, ternary oxides are considered to be appealing alternatives, where ATiO3 materials-a class of ternary perovskite oxides-have demonstrated considerable potential for applications in solar cells. Here, we have employed calculations based on the density functional theory to study the structural, optoelectronic, and magnetic properties of ATiO3 (A=Li, Na, K, Rb, and Cs) in different crystallographic phases to determine their potential as PSCs and Per-SCs materials. We have also determined thermal and elastic properties to evaluate their mechanical and thermal stability. Our calculations have revealed that KTiO3 and RbTiO3 possess similar electronic properties as half-metallic materials, while LiTiO3 and CsTiO3 are metallic. Semiconductor behavior with a direct band gap of 2.77 eV was observed for NaTiO3, and calculations of the optical and electronic properties predicted that NaTiO3 is the most appropriate candidate to be employed as a charge transfer layer (CTL) and bottom transparent conducting electrode (TCE) in PSCs and Per-SCs, owing to its transparency and large bandgap, whereas NaTiO3 also provided superior elastic and thermal properties. Among the metallic and half-metallic ATiO3 compounds, CsTiO3 and KTiO3 exhibited the most appropriate features for the top electrode and additional absorbent in the active layer, respectively, to enhance the performance and stability of these cells.