Arthroscopic assisted versus open non-vascularized bone grafting in delayed union and nonunion of the scaphoid: a systematic review and meta-analysis.

BACKGROUND: Delayed union and nonunion of the scaphoid is a common complication often requiring surgical reconstruction and bone grafting. Our goal was to systematically assess the healing time and clinical outcomes following arthroscopic-assisted versus open non-vascularized bone grafting of the scaphoid. METHODS: A comprehensive search of the MEDLINE, Embase, CINAHL (Cumulative Index to Nursing and Allied Health Literature), and Cochrane Central databases was completed from inception to September 2023. We included randomized trials and observational studies that reported outcomes following scaphoid delayed union/nonunion comparing arthroscopic-assisted vs. open non-vascularized bone grafting. Two reviewers independently extracted data and assessed the risk of bias. One investigator assessed certainty of evidence and a senior investigator confirmed the assessment. We pooled effects using random-effects models, when possible, for all outcomes reported by more than 1 study. RESULTS: Overall, 26 studies and 822 patients were included in the study. Very low certainty evidence demonstrated that arthroscopic-assisted surgery may decrease healing time compared to open surgery (weighted mean difference [WMD] -7.8 weeks; 95%CI -12.8 to -2.8). Arthroscopic bone grafting did not result in an improvement in union rate (relative risk 1.01; 95%CI 0.9 to 1.09). The pooled data in arthroscopic graft group showed mean time to union of 11.4 weeks (95%CI: 10.4 to 12.5) with union rate of 95% (95%CI 91-98%). A single comparative study reported very low certainty evidence that arthroscopy-assisted vs. open surgery may not have an effect on pain relief (MD 0 cm, 95%CI -0.4 to 0.5 on VAS 10 cm for pain) or improving function (MD -1.2, 95% CI -4.8 to 2.3 on 100 points DASH). CONCLUSION AND FUTURE DIRECTIONS: Our results suggest that arthroscopic-assisted non-vascularized bone grafting may be associated with improved average weeks to heal in comparison with open surgery for scaphoid delayed union/nonunion reconstruction with overall comparable union rates. There is insufficient evidence to assess the effects of arthroscopic-assisted reconstruction on union rate, time to union, and patient-reported outcomes in patients with other important nonunion characteristics such as established humpback deformity.

Outcomes of Osteochondral Autologous Transplantation with Ipsilateral Lateral Talar Autograft for Medial Osteochondral Lesions of the Talus.

Background: Osteochondral autologous transplantation (OAT) has been widely used in the treatment of osteochondral lesion of the talus (OLT). Previous studies have reported successful outcomes following the use of osteochondral autogenous grafts from the intercondylar notch of the knee or a non-weight-bearing region of the femoral condyle. However, donor-site morbidity of the knee joint has been observed in several cases. This study aimed to investigate the outcomes and safety of OAT with autografts from the ipsilateral lateral talar articular facet as an alternative donor site for medial OLT. Methods: Among 40 patients who underwent OAT, 29 patients were excluded. Eleven patients who underwent OAT with an osteochondral graft harvested from the ipsilateral lateral talar articular facet from 2011 to 2022 were retrospectively analyzed. The size of OLT was measured on ankle magnetic resonance imaging, including coronal length, sagittal length, depth, and area. Clinical outcomes were evaluated using the American Orthopaedic Foot and Ankle Society (AOFAS) ankle-hindfoot scale and a visual analog scale (VAS). Weight-bearing ankle radiographs were obtained postoperatively and at 1 year after surgery. Results: The average follow-up time after surgery was 64.7 months (range, 14-137 months). The average diameter of lesions was 8.8 mm (range, 8-9.9 mm). The average size of lesions was 51.2 mm2 (range, 33.6-71.3 mm2) , and all lesions included subchondral cysts. The average depth of lesions was 7.3 mm (range, 6.2-9.1 mm). Graft sizes ranged from 8 to 10 mm in diameter (8 mm, n = 1; 10 mm, n = 10) All measured clinical outcomes improved postoperatively, including the AOFAS scores (preoperative, 55.4 ± 9.0; 1-year follow-up, 92.1 ± 7.6; p = 0.001) and VAS scores (preoperative, 5.5 ± 0.7; 1-year follow-up, 1.9 ± 0.8; p = 0.001). All weight-bearing ankle radiographs of the graft and donor sites did not reveal arthritic change in the ankle joint, lateral talar dome collapse, and graft-site delayed union or nonunion at 1 year after surgery. Conclusions: For a single medial OLT, harvesting autografts from the ipsilateral lateral talar articular facet without knee donor-site morbidities can be a good alternative in OAT for OLT.

A Novel Approach to Total Ankle Arthroplasty with Simultaneous Structural Tibial Cut Autograft for Anterior Tibial Bone Defects.

Severe bone defects pose a clinical challenge in total ankle arthroplasty (TAA) and are frequently considered contraindicated. We introduce an innovative approach that utilizes a structural tibial cut autograft to address anterior distal tibia bone defects during TAA. This technique is a viable alternative to employing revision TAA systems or resorting to excessively high tibial cuts. Furthermore, it facilitates achieving favorable sagittal alignment and ensures adequate fixation strength of the tibial component.

[Application of autogenous block bone graft in the reconstruction of severe alveolar crest defect].

Patients with severe alveolar ridge defects cannot be directly implanted and repaired, which seriously affects their quality of life. Onlay bone grafting is the main solution for severe alveolar ridge bone defect reconstruction, among which autogenous block bone grafting is the most widely used and is also the focus of clinical research on bone tissue reconstruction. This article expounds the characteristics and basic principles of autogenous bone block grafting, and comprehensively analyzes the selection of autogenous bone donor site, the principles of surgical operation, and the progress of bone graft techniques. In order to help surgeons make correct clinical decisions, increase the predictability of surgical effects, and improve the level of clinical diagnosis and treatment.

Lateral Tibial Plateau Reconstruction Using Tricortical Iliac Crest Autograft as the Weight-Bearing Surface.

VIDEO AVAILABLE AT: https://ota.org/education/ota-online-resources/video-library-procedures-techniques/lateral-tibial-plateau.

Anterior Iliac Crest Bone Graft Harvest Using Acetabular Reamers.

VIDEO AVAILABLE AT: https://ota.org/education/ota-online-resources/video-library-procedures-techniques/anterior-iliac-crest-bone-0.

Effectiveness of synthetic versus autologous bone grafts in foot and ankle surgery: a systematic review and meta-analysis.

BACKGROUND: All orthopaedic procedures, comprising foot and ankle surgeries, seemed to show a positive trend, recently. Bone grafts are commonly employed to fix bone abnormalities resulting from trauma, disease, or other medical conditions. This study specifically focuses on reviewing the safety and efficacy of various bone substitutes used exclusively in foot and ankle surgeries, comparing them to autologous bone grafts. METHODS: The systematic search involved scanning electronic databases including PubMed, Scopus, Cochrane online library, and Web of Science, employing terms like 'Bone substitute,' 'synthetic bone graft,' 'Autograft,' and 'Ankle joint.' Inclusion criteria encompassed RCTs, case-control studies, and prospective/retrospective cohorts exploring different bone substitutes in foot and ankle surgeries. Meta-analysis was performed using R software, integrating odds ratios and 95% confidence intervals (CI). Cochrane's Q test assessed heterogeneity. RESULTS: This systematic review analyzed 8 articles involving a total of 894 patients. Out of these, 497 patients received synthetic bone grafts, while 397 patients received autologous bone grafts. Arthrodesis surgery was performed in five studies, and three studies used open reduction techniques. Among the synthetic bone grafts, three studies utilized a combination of recombinant human platelet-derived growth factor BB homodimer (rhPDGF-BB) and beta-tricalcium phosphate (ß-TCP) collagen, while four studies used hydroxyapatite compounds. One study did not provide details in this regard. The meta-analysis revealed similar findings in the occurrence of complications, as well as in both radiological and clinical evaluations, when contrasting autografts with synthetic bone grafts. CONCLUSION: Synthetic bone grafts show promise in achieving comparable outcomes in radiological, clinical, and quality-of-life aspects with fewer complications. However, additional research is necessary to identify the best scenarios for their use and to thoroughly confirm their effectiveness. LEVELS OF EVIDENCE: Level II.

Fabricating vascularized, anatomically accurate bone grafts using 3D bioprinted sectional bone modules, in-situ angiogenesis, BMP-2 controlled release, and bioassembly.

Bone grafting is the most common treatment for repairing bone defects. However, current bone grafting methods have several drawbacks. Bone tissue engineering emerges as a promising solution to these problems. An ideal engineered bone graft should exhibit high mechanical strength, osteogenic properties, and pre-vascularization. Both top-down (using bulk scaffold) and bottom-up (using granular modules) approaches face challenges in fulfilling these requirements. In this paper, we propose a novel sectional modular bone approach to construct osteogenic, pre-vascularized bone grafts in anatomical shapes. We 3D-printed a series of rigid, thin, sectional, porous scaffolds from a biodegradable polymer, tailored to the dimensions of a femur bone shaft. These thin sectional modules promote efficient nutrition and waste removal due to a shorter diffusion distance. The modules were pre-vascularized viain-situangiogenesis, achieved through endothelial cell sprouting from the scaffold struts. Angiogenesis was further enhanced through co-culture with bioprinted fibroblast microtissues, which secreted pre-angiogenic growth factors. Sectional modules were assembled around a porous rod incorporated with Bone Morphogenetic Protein-2 (BMP-2), which released over 3 weeks, demonstrating sustained osteogenic activity. The assembled scaffold, in the anatomical shape of a human femur shaft, was pre-vascularized, osteogenic, and possessed high mechanical strength, supporting 12 times the average body weight. The feasibility of implanting the assembled bone graft was demonstrated using a 3D-printed femur bone defect model. Our method provides a novel modular engineering approach for regenerating tissues that require high mechanical strength and vascularization.

A Systematic Review and Meta-Analysis of the Outcomes of Reconstruction with Vascularised vs Non-Vascularised Bone Graft after Surgical Resection of Primary Malignant and Non-Malignant Bone Tumors.

PURPOSE OF THE STUDY: Vascularised bone grafting (VBG) and non-vascularised bone grafting (NVBG) are crucial biological reconstructive procedures extensively employed in the management of bone tumours. The principal aim of this study is to conduct a comparative analysis of the post-resection outcomes associated with the utilisation of vascularised and non-vascularised bone grafts. MATERIAL AND METHODS: A comprehensive and systematic literature review spanning the years 2013 to 2023 was meticulously executed, utilising prominent online databases including PubMed/Medline, Google Scholar, and Cochrane Library. Inclusion criteria were restricted to comparative articles that specifically addressed outcomes pertaining to defect restoration following bone tumour resection via vascularised and non-vascularised bone grafting techniques. The quality of research methodologies was assessed using the Oxford Quality Scoring System for randomised trials and the Newcastle Ottawa Scale for non-randomised comparative studies. Data analysis was conducted using SPSS version 24. Key outcome measures encompassed the Musculoskeletal Tumour Society Score (MSTS), bone union duration, and the incidence of post-operative complications. RESULTS: This analysis incorporated four clinical publications, enrolling a total of 178 participants (comprising 92 males and 86 females), with 90 patients subjected to VBG and 88 to NVBG procedures. The primary endpoints of interest encompassed MSTS scores and bone union durations. Although no statistically significant distinction was observed in the complication rates between the two cohorts, it is noteworthy that VBG exhibited a markedly superior bone union rate (P<0.001). CONCLUSIONS: Our systematic evaluation revealed that VBG facilitates expedited bone union, thereby contributing to accelerated patient recovery. Notably, complication rates and functional outcomes were comparable between the VBG and NVBG groups. Moreover, the correlation between bone union duration and functional scores following VBG and NVBG merits further investigation. KEY WORDS: reconstruction techniques, vascularised bone grafting, non-vascularised bone grafting, bone tumor, resection.

A Unique Approach to Irreparable Radial Head Fracture Using an Osteochondral Plug: A Case Report.

CASE: An 18-year-old male patient sustained a traumatic injury that resulted in the loss of approximately 50% of the radial head. Subsequently, reconstruction was performed by transplanting an osteochondral plug harvested from the lateral femoral condyle. At the 1-year postoperative follow-up, the patient was pain-free and had a good range of motion. CONCLUSION: Using a novel technique, an irreparable radial head fracture was reconstructed using an osteochondral plug from the lateral femoral condyle. Reconstruction with osteochondral plugs may be a treatment option for partial loss of the radial head.

The Use of a Distal Radius Allograft for Severe Glenoid Bone Loss in the Setting of Revision Shoulder Arthroplasty: A Case Report.

CASE: A 71-year-old female patient presented with severe glenoid bone loss and deformity after 2 subsequent failed arthroplasty procedures because of baseplate failures. The patients then underwent a conversion from reverse shoulder arthroplasty to hemiarthroplasty, while using a distal radius allograft to augment the deformed glenoid. At the 2-year follow-up, the patient reported minimal pain and satisfactory outcomes. CONCLUSION: This case presents the distal radius as a potentially useful allograft option for augmenting severe glenoid bone loss in the setting of revision shoulder arthroplasty.

Mid- to long-term outcomes of proximal humerus fractures treated with open reduction, plate fixation, and iliac bone autograft augmentation.

BACKGROUND: Open reduction and internal fixation (ORIF) using locking plates is a widely adopted treatment for displaced proximal humerus fractures. Various augmentation techniques have been developed to enhance the stability of plate fixation. Among these, iliac bone autograft is notable for its advantages over allografts, such as ready availability and the elimination of costs and risks associated with disease transmission. Despite its potential benefits, data on the outcomes of iliac bone autograft augmentation (IBAA) are still limited. This study aims to present the mid- to long-term results of treating proximal humerus fractures with ORIF using locking plates and IBAA. METHODS: The study included 15 patients treated with ORIF and IBAA. We classified fracture patterns using the Neer classification and estimated local bone density via the deltoid tuberosity index. We measured the neck shaft angle (NSA) and humeral head height (HHH) on both immediate postoperative and most recent X-ray images to assess the maintenance of reduction. Clinical outcomes were evaluated using the DASH (Disabilities of the Arm, Shoulder, and Hand) and Constant scores. RESULTS: The average follow-up duration was 59.56 months, ranging from 24 to 93 months. A majority of fractures were classified as four-part (53%). The average immediate and late postoperative NSAs were 132.6±8.19 and 131.6±7.32 degrees, respectively. The average HHH on the immediate postoperative and latest follow-up images were 16.46±6.07 and 15.10±5.34, respectively. None of the patients exhibited any radiological signs of avascular necrosis or loss of reduction at the latest follow-up. The mean postoperative Constant and DASH scores at the latest follow-up were 79.6 and 11.5, respectively. CONCLUSION: Our findings suggest that ORIF with IBAA is an effective method for managing three- or four-part proximal humerus fractures, yielding excellent outcomes.

Is still effective massive allograft reconstruction in parosteal osteosarcoma of the distal femur? Review of the literature and advantages of newer technologies.

PURPOSE: Parosteal Osteosarcoma is a well-differentiated, low-grade bone sarcoma. It most commonly occurs in the third decade of life, usually in the distal femur. This study aims to perform a literature review about the types of reconstructions reported and to analyze the results of an updated technique of resection using custom-made 3D-printed cutting guides. METHODS: We perform a systematic literature review about parosteal osteosarcoma, evaluating treatments, margins, local recurrence, complications, and functional results when available. We also report a case treated in our Center with a revisited technique introducing custom-made 3D-printed cutting guides. RESULTS: We analyzed 12 studies with a total of 151 patients. The distal femur was the most frequently reported site (81.5%). After distal femur resection, reconstruction was performed with graft in most cases (48%), followed by prosthetic reconstruction (40%). Margins were wide in 85.5% of cases. The total incidence of local recurrence was 11%. Functional results were excellent in all cases, with a mean MSTS score of 86%. In our case, with the help of the jigs, the surgical technique was relatively easy, graft fusion excellent and fast, margins wide, and functional results excellent. CONCLUSIONS: In the literature, the most commonly used type of reconstruction after resection is biological with graft. Indeed, despite the increasing number of prosthetic reconstructions, the historical diaphysometaphyseal hemiresection and graft is still indicated in parosteal osteosarcoma of the distal femur. New technologies, such as the jigs we used, allow significant advantages during the procedure: reduce the resection and graft preparation time, allow a better match between components, and help to obtain safer margins, sparing as much bone as possible.

Usability of a novel Hounsfield units measurement procedure to quantify intercorporal bone graft remodeling in patients after posterior lumbar interbody fusion: a case series.

BACKGROUND: There is a lack of knowledge about the biological process of intercorporal bone graft remodeling after posterior lumbar interbody fusion surgery and whether this process is associated with changes in back pain and intercorporal fusion status. As an alternative to the commonly used but unreliable fusion criteria, Hounsfield units can be used to quantify biological activity and changes in bone mineral content. However, studies assessing Hounsfield units conducted to date do not provide sufficient details about how the bone grafts were segmented to measure the Hounsfield units to allow for replication, and did not assess individual patient trends in graft changes over time. Using the data of nine patients after posterior lumbar interbody fusion, a novel Hounsfield units measurement procedure was developed and used to explore its usability to quantify the bone graft remodeling process. CASE DETAILS: We report a case series of nine patients (six male, three female, mean age 64 years, all Caucasian) who all had computed tomography scans performed at 1 and 2 years after posterior lumbar interbody fusion surgery. Overall, seven out of the nine (78%) cases had a 3-41% increase in their bone grafts' Hounsfield units between 1 and 2 years after surgery. The cases showed large interindividual variability in their Hounsfield units values over time, which coincided with varying levels of back pain and intercorporal fusion status. CONCLUSION: The Hounsfield units measurement procedure used for this case series may be useful to quantify intercorporal bone graft remodeling in patients after posterior lumbar interbody fusion, and may be used as an adjunct diagnostic measure to monitor bone graft remodeling over time. Future research is warranted to explore how to interpret bone graft Hounsfield units-values and Hounsfield units trajectories in light of clinical variables or intercorporal fusion status.

Surgical hip dislocation technique through the femoral head fovea fenestration and impaction bone grafting for the treatment of non-traumatic osteonecrosis of the femoral head: a retrospective study.

BACKGROUND: Osteonecrosis of the femoral head (ONFH) often leads to the collapse of the femoral head, ultimately resulting in patients undergoing premature total hip arthroplasty (THA). The surgical hip dislocation (SHD) technique is a type of hip-preserving surgery aimed at delaying or avoiding THA. This study aims to evaluate the clinical efficacy of SHD techniques through femoral head fovea fenestration and impaction bone grafting for the treatment of non-traumatic ONFH. METHODS: A retrospective analysis was conducted on the clinical data of 39 patients (39 hips) with non-traumatic ONFH who underwent SHD for treatment from 2016 to 2017. The Harris hip score (HHS) and the minimum clinically important difference (MCID) are used to evaluate clinical outcomes, while radiographic evaluations are conducted using X-rays. Kaplan-Meier survival analysis defined clinical failure as further THA, and conducted univariate survival analysis and Cox regression analysis. Any complications were recorded. RESULTS: All patients were followed up for 24-72 months, with an average of (60 ± 13.0) months. At the last follow-up, based on the HHS, 25 patients (64.1%) reported excellent and good clinical outcomes. 29 patients (74.3%) achieved MCID. Imaging evaluation of the postoperative femoral head status showed that 6 cases improved, 20 cases remained stable, and 13 cases showed progressed. Out of 39 hips, 12 hips had postoperative clinical failure, resulting in a clinical success rate of 69.2%. Association Research Circulation Osseous (ARCO) stage, China-Japan Friendship Hospital (CJFH) classification, and postoperative crutch-bearing time are risk factors for clinical failure. Postoperative crutch-bearing time of less than 3 months is an independent risk factor for clinical failure. After surgery, there was one case of sciatic nerve injury and one case of heterotopic ossification. There were no infections or non-union of the greater trochanter osteotomy. CONCLUSION: The SHD technique through the femoral head fovea fenestration and impaction bone grafting provides a safe and effective method for treating non-traumatic ONFH, with good mid-term clinical outcomes. ARCO staging, CJFH classification, and postoperative crutch-bearing time are risk factors that affect clinical outcomes after surgery and lead to further THA. Insufficient postoperative crutch-bearing time is an independent risk factor for clinical failure.

Developments in Alloplastic Bone Grafts and Barrier Membrane Biomaterials for Periodontal Guided Tissue and Bone Regeneration Therapy.

Periodontitis is a serious form of oral gum inflammation with recession of gingival soft tissue, destruction of the periodontal ligament, and absorption of alveolar bone. Management of periodontal tissue and bone destruction, along with the restoration of functionality and structural integrity, is not possible with conventional clinical therapy alone. Guided bone and tissue regeneration therapy employs an occlusive biodegradable barrier membrane and graft biomaterials to guide the formation of alveolar bone and tissues for periodontal restoration and regeneration. Amongst several grafting approaches, alloplastic grafts/biomaterials, either derived from natural sources, synthesization, or a combination of both, offer a wide variety of resources tailored to multiple needs. Examining several pertinent scientific databases (Web of Science, Scopus, PubMed, MEDLINE, and Cochrane Library) provided the foundation to cover the literature on synthetic graft materials and membranes, devoted to achieving periodontal tissue and bone regeneration. This discussion proceeds by highlighting potential grafting and barrier biomaterials, their characteristics, efficiency, regenerative ability, therapy outcomes, and advancements in periodontal guided regeneration therapy. Marketed and standardized quality products made of grafts and membrane biomaterials have been documented in this work. Conclusively, this paper illustrates the challenges, risk factors, and combination of biomaterials and drug delivery systems with which to reconstruct the hierarchical periodontium.

[Harvesting of autologous bone graft for the mandible: from the hip or the jaw?] / Oogsten van autologe botgraft voor de mandibula: uit heup of kaak?

A 61-year-old edentulous patient presented with dental problems. Examination revealed a very narrow alveolar process in the symphysis area of the chin, with moderate vertical resorption. The decision was made for bone augmentation by means of harvesting an autologous bone graft from the alveolar process. This method can be carried out in an outpatient or day surgery unit and is much more cost effective and less invasive than harvesting an autologous bone graft from the hip area.

How effective is dentin autograft for socket preservation and implant site preparation: A systematic review protocol.

Background: Socket preservation is a surgical procedure aimed at preserving the dimensions of the alveolar bone following tooth extraction. It is performed by filling the extraction socket with bone graft material with or without a barrier membrane. Recently, dentine obtained from extracted teeth has been tried as an autograft for socket preservation. Studies have compared the use of dentin to other bone grafts, however, systematic reviews evaluating the efficacy of dentin for socket preservation are limited. Hence, this systematic review protocol is proposed to generate evidence on the efficacy of dentin as a viable alternative to other bone graft materials for socket preservation. Methods: This systematic review protocol was prepared according to the Methodological Expectations of the Cochrane Intervention Reviews (MECIR) guidelines. It will be conducted using the Cochrane Handbook for Systematic Review of Interventions. PubMed, Scopus, Web of Science, EMBASE, Epistemonikos, Cochrane Central, and EBSCO databases and clinical trial registries, will be searched for all randomized controlled trials (RCTs) and non-randomized studies that have used autologous dentin graft (either in particulate/putty, or/matrix form) for socket preservation. The radiographic and clinical assessment of bone and soft tissue healing of the preserved sockets along with patient-related outcomes following surgery will be assessed. The risk of bias assessment of the RCTs and Non-RCTs will be assessed using the 'Cochrane Risk of Bias assessment tool (ROB II) and ROBINS-I respectively. The certainty of evidence will be assessed by the GRADE approach. Discussion: This evidence is important for dental clinicians and the public to make an informed decision when choosing graft material for socket preservation. The extracted teeth are considered biological waste; however, this evidence provides scope for using a less invasive autograft for bone regenerative procedures. Systematic review registration: PROSPERO: CRD42021201958 (Registered on 15/02/2021).