ABSTRACT
Cost-effective CO2 adsorbents are gaining increasing attention as viable solutions for mitigating climate change. In this study, composites were synthesized by electrochemically combining the post-gasification residue of Macadamia nut shell with copper benzene-1,3,5-tricarboxylate (CuBTC). Among the different composites synthesized, the ratio of 1:1 between biochar and CuBTC (B 1:1) demonstrated the highest CO2 adsorption capacity. Under controlled laboratory conditions (0°C, 1 bar, without the influence of ambient moisture or CO2 diffusion limitations), B 1:1 achieved a CO2 adsorption capacity of 9.8 mmol/g, while under industrial-like conditions (25°C, 1 bar, taking into account the impact of ambient moisture and CO2 diffusion limitations within a bed of adsorbent), it reached 6.2 mmol/g. These values surpassed those reported for various advanced CO2 adsorbents investigated in previous studies. The superior performance of the B 1:1 composite can be attributed to the optimization of the number of active sites, porosity, and the preservation of the full physical and chemical surface properties of both parent materials. Furthermore, the composite exhibited a notable CO2/N2 selectivity and improved stability under moisture conditions. These favorable characteristics make B 1:1 a promising candidate for industrial applications.
Subject(s)
Carbon Dioxide , Metal-Organic Frameworks , Carbon Dioxide/chemistry , Adsorption , Metal-Organic Frameworks/chemistry , Air Pollutants/chemistry , Charcoal/chemistryABSTRACT
China is the most important steel producer in the world, and its steel industry is one of the most carbon-intensive industries in China. Consequently, research on carbon emissions from the steel industry is crucial for China to achieve carbon neutrality and meet its sustainable global development goals. We constructed a carbon dioxide (CO2) emission model for China's iron and steel industry from a life cycle perspective, conducted an empirical analysis based on data from 2019, and calculated the CO2 emissions of the industry throughout its life cycle. Key emission reduction factors were identified using sensitivity analysis. The results demonstrated that the CO2 emission intensity of the steel industry was 2.33 ton CO2/ton, and the production and manufacturing stages were the main sources of CO2 emissions, accounting for 89.84% of the total steel life-cycle emissions. Notably, fossil fuel combustion had the highest sensitivity to steel CO2 emissions, with a sensitivity coefficient of 0.68, reducing the amount of fossil fuel combustion by 20% and carbon emissions by 13.60%. The sensitivities of power structure optimization and scrap consumption were similar, while that of the transportation structure adjustment was the lowest, with a sensitivity coefficient of less than 0.1. Given the current strategic goals of peak carbon and carbon neutrality, it is in the best interest of the Chinese government to actively promote energy-saving and low-carbon technologies, increase the ratio of scrap steel to steelmaking, and build a new power system.
Subject(s)
Carbon Dioxide , Carbon Footprint , Steel , China , Carbon Dioxide/analysis , Air Pollutants/analysis , Metallurgy , Environmental Monitoring , Industry , Air Pollution/statistics & numerical data , Air Pollution/prevention & controlABSTRACT
Monolithic aerogels are promising candidates for use in atmospheric environmental purification due to their structural advantages, such as fine building block size together with high specific surface area, abundant pore structure, etc. Additionally, monolithic aerogels possess a unique monolithic macrostructure that sets them apart from aerogel powders and nanoparticles in practical environmental clean-up applications. This review delves into the available synthesis strategies and atmospheric environmental applications of monolithic aerogels, covering types of monolithic aerogels including SiO2, graphene, metal oxides and their combinations, along with their preparation methods. In particular, recent developments for VOC adsorption, CO2 capture, catalytic oxidation of VOCs and catalytic reduction of CO2 are highlighted. Finally, challenges and future opportunities for monolithic aerogels in the atmospheric environmental purification field are proposed. This review provides valuable insights for designing and utilizing monolithic aerogel-based functional materials.
Subject(s)
Air Pollutants , Gels , Air Pollutants/chemistry , Gels/chemistry , Atmosphere/chemistry , Adsorption , Carbon Dioxide/chemistry , Environmental Restoration and Remediation/methods , Silicon Dioxide/chemistryABSTRACT
In the context of peaking carbon dioxide emissions and carbon neutrality, development of feasible methods for converting CO2 into high value-added chemicals stands out as a hot subject. In this study, P[D+COO-][Br-][DBUH+], a series of novel heterogeneous dual-ionic poly(ionic liquid)s (PILs) were synthesized readily from 2-(dimethylamino) ethyl methacrylate (DMAEMA), bromo-substituted aliphatic acids, organic bases and divinylbenzene (DVB). The structures, compositions and morphologies were characterized or determined by nuclear magnetic resonance (NMR), thermal gravimetric analysis (TGA), infrared spectroscopy (IR), scanning electron microscopes (SEM), and Brunauer-Emmett-Teller analysis (BET), etc. Application of the P[D+COO-][Br-][DBUH+] series as catalysts in converting CO2 into cyclic carbonates showed that P[D+COO-][Br-][DBUH+]-2/1/0.6 was able to catalyze epiclorohydrin-CO2 cycloaddition the most efficiently. This afforded chloropropylene carbonate (CPC) in 98.4% yield with ≥ 99% selectivity in 24 hr under solvent- and additive-free conditions at atmospheric pressure. Reusability experiments showed that recycling of the catalyst 6 times only resulted in a slight decline in the catalytic performance. In addition, it could be used for the synthesis of a variety of differently substituted cyclic carbonates in good to excellent yields. Finally, key catalytic active sites were probed, and a reasonable mechanism was proposed accordingly. In summary, this work poses an efficient strategy for heterogenization of dual-ionic PILs and provides a mild and environmentally benign approach to the fixation and utilization of carbon dioxide.
Subject(s)
Carbon Dioxide , Carbonates , Ionic Liquids , Ionic Liquids/chemistry , Carbon Dioxide/chemistry , Carbonates/chemistry , Catalysis , Models, ChemicalABSTRACT
The emission of heavy-duty vehicles has raised great concerns worldwide. The complex working and loading conditions, which may differ a lot from PEMS tests, raised new challenges to the supervision and control of emissions, especially during real-world applications. On-board diagnostics (OBD) technology with data exchange enabled and strengthened the monitoring of emissions from a large number of heavy-duty diesel vehicles. This paper presents an analysis of the OBD data collected from more than 800 city and highway heavy-duty vehicles in China using remote OBD data terminals. Real-world NOx and CO2 emissions of China-6 heavy-duty vehicles have been examined. The results showed that city heavy-duty vehicles had higher NOx emission levels, which was mostly due to longer time of low SCR temperatures below 180°C. The application of novel methods based on 3B-MAW also found that heavy-duty diesel vehicles tended to have high NOx emissions at idle. Also, little difference had been found in work-based CO2 emissions, and this may be due to no major difference were found in occupancies of hot running.
Subject(s)
Air Pollutants , Carbon Dioxide , Environmental Monitoring , Nitrogen Oxides , Vehicle Emissions , Vehicle Emissions/analysis , China , Air Pollutants/analysis , Carbon Dioxide/analysis , Environmental Monitoring/methods , Nitrogen Oxides/analysis , Cities , Air Pollution/statistics & numerical data , Air Pollution/analysis , Gasoline/analysisABSTRACT
Li6ZnO4 was chemically modified by nickel addition, in order to develop different compositions of the solid solution Li6Zn1-xNixO4. These materials were evaluated bifunctionally; analyzing their CO2 capture performances, as well as on their catalytic properties for H2 production via dry reforming of methane (DRM). The crystal structures of Li6Zn1-xNixO4 solid solution samples were determined through X-ray diffraction, which confirmed the integration of nickel ions up to a concentration around 20 mol%, meanwhile beyond this value, a secondary phase was detected. These results were supported by XPS and TEM analyses. Then, dynamic and isothermal thermogravimetric analyses of CO2 capture revealed that Li6Zn1-xNixO4 solid solution samples exhibited good CO2 chemisorption efficiencies, similarly to the pristine Li6ZnO4 chemisorption trends observed. Moreover, a kinetic analysis of CO2 isothermal chemisorptions, using the Avrami-Erofeev model, evidenced an increment of the constant rates as a function of the Ni content. Since Ni2+ ions incorporation did not reduce the CO2 capture efficiency and kinetics, the catalytic properties of these materials were evaluated in the DRM process. Results demonstrated that nickel ions favored hydrogen (H2) production over the pristine Li6ZnO4 phase, despite a second H2 production reaction was determined, methane decomposition. Thereby, Li6Zn1-xNixO4 ceramics can be employed as bifunctional materials.
Subject(s)
Carbon Dioxide , Hydrogen , Methane , Hydrogen/chemistry , Methane/chemistry , Carbon Dioxide/chemistry , Nickel/chemistry , Catalysis , Models, ChemicalABSTRACT
Catalytic hydrogenation of CO2 to ethanol is a promising solution to address the greenhouse gas (GHG) emissions, but many current catalysts face efficiency and cost challenges. Cobalt based catalysts are frequently examined due to their abundance, cost-efficiency, and effectiveness in the reaction, where managing the Co0 to Coδ+ ratio is essential. In this study, we adjusted support nature (Al2O3, MgO-MgAl2O4, and MgO) and reduction conditions to optimize this balance of Co0 to Coδ+ sites on the catalyst surface, enhancing ethanol production. The selectivity of ethanol reached 17.9% in a continuous flow fixed bed micro-reactor over 20 mol% Co@MgO-MgAl2O4 (CoMgAl) catalyst at 270 °C and 3.0 MPa, when reduced at 400 °C for 8 h. Characterisation results coupled with activity analysis confirmed that mild reduction condition (400 °C, 10% H2 balance N2, 8 h) with intermediate metal support interaction favoured the generation of partially reduced Co sites (Coδ+ and Co0 sites in single atom) over MgO-MgAl2O4 surface, which promoted ethanol synthesis by coupling of dissociative (CHx*)/non-dissociative (CHxO*) intermediates, as confirmed by density functional theory analysis. Additionally, the CoMgAl, affordably prepared through the coprecipitation method, offers a potential alternative for CO2 hydrogenation to yield valuable chemicals.
Subject(s)
Carbon Dioxide , Cobalt , Ethanol , Carbon Dioxide/chemistry , Ethanol/chemistry , Hydrogenation , Cobalt/chemistry , Catalysis , Nanoparticles/chemistry , Models, ChemicalABSTRACT
Current strategies to hold surface warming below a certain level, e. g., 1.5 or 2°C, advocate limiting total anthropogenic cumulative carbon emissions to â¼0.9 or â¼1.25 Eg C (1018 grams carbon), respectively. These allowable emission budgets are based on a near-linear relationship between cumulative emissions and warming identified in various modeling efforts. The IPCC assesses this near-linear relationship with high confidence in its Summary for Policymakers (§D1.1 and Figure SPM.10). Here we test this proportionality in specially designed simulations with a latest-generation Earth system model (ESM) that includes an interactive carbon cycle with updated terrestrial ecosystem processes, and a suite of CMIP simulations (ZecMIP, ScenarioMIP). We find that atmospheric CO2 concentrations can differ by â¼100 ppmv and surface warming by â¼0.31°C (0.46°C over land) for the same cumulated emissions (≈1.2 Eg C, approximate carbon budget for 2°C target). CO2 concentration and warming per 1 Eg of emitted carbon (Transient Climate Response to Cumulative Carbon Emissions; TCRE) depend not just on total emissions, but also on the timing of emissions, which heretofore have been mainly overlooked. A decomposition of TCRE reveals that oceanic heat uptake is compensating for some, but not all, of the pathway dependence induced by the carbon cycle response. The time dependency clearly arises due to lagged carbon sequestration processes in the oceans and specifically on land, viz., ecological succession, land-cover, and demographic changes, etc., which are still poorly represented in most ESMs. This implies a temporally evolving state of the carbon system, but one which surprisingly apportions carbon into land and ocean sinks in a manner that is independent of the emission pathway. Therefore, even though TCRE differs for different pathways with the same total emissions, it is roughly constant when related to the state of the carbon system, i. e., the amount of carbon stored in surface sinks. While this study does not fundamentally invalidate the established TCRE concept, it does uncover additional uncertainties tied to the carbon system state. Thus, efforts to better understand this state dependency with observations and refined models are needed to accurately project the impact of future emissions.
Subject(s)
Carbon Cycle , Carbon Dioxide , Carbon Dioxide/analysis , Ecosystem , Carbon/analysis , Global Warming , Atmosphere/chemistry , Climate ModelsABSTRACT
Rubisco activity is highly regulated and frequently limits carbon assimilation in crop plants. In the chloroplast, various metabolites can inhibit or modulate Rubisco activity by binding to its catalytic or allosteric sites, but this regulation is complex and still poorly understood. Using rice Rubisco, we characterised the impact of various chloroplast metabolites which could interact with Rubisco and modulate its activity, including photorespiratory intermediates, carbohydrates, amino acids; as well as specific sugar-phosphates known to inhibit Rubisco activity - CABP (2-carboxy-d-arabinitol 1,5-bisphosphate) and CA1P (2-carboxy-d-arabinitol 1-phosphate) through in vitro enzymatic assays and molecular docking analysis. Most metabolites did not directly affect Rubisco in vitro activity under both saturating and limiting concentrations of Rubisco substrates, CO2 and RuBP (ribulose-1,5-bisphosphate). As expected, Rubisco activity was strongly inhibited in the presence of CABP and CA1P. High physiologically relevant concentrations of the carboxylation product 3-PGA (3-phosphoglyceric acid) decreased Rubisco activity by up to 30%. High concentrations of the photosynthetically derived hexose phosphates fructose 6-phosphate (F6P) and glucose 6-phosphate (G6P) slightly reduced Rubisco activity under limiting CO2 and RuBP concentrations. Biochemical measurements of the apparent Vmax and Km for CO2 and RuBP (at atmospheric O2 concentration) and docking interactions analysis suggest that CABP/CA1P and 3-PGA inhibit Rubisco activity by binding tightly and loosely, respectively, to its catalytic sites (i.e. competing with the substrate RuBP). These findings will aid the design and biochemical modelling of new strategies to improve the regulation of Rubisco activity and enhance the efficiency and sustainability of carbon assimilation in rice.
Subject(s)
Chloroplasts , Molecular Docking Simulation , Oryza , Ribulose-Bisphosphate Carboxylase , Ribulose-Bisphosphate Carboxylase/metabolism , Ribulose-Bisphosphate Carboxylase/chemistry , Chloroplasts/metabolism , Chloroplasts/enzymology , Oryza/metabolism , Oryza/enzymology , Photosynthesis , Plant Proteins/metabolism , Plant Proteins/chemistry , Carbon Dioxide/metabolism , Ribulosephosphates/metabolism , Fructosephosphates/metabolismABSTRACT
Methanogenic hydrocarbon degradation can be carried out by archaea that couple alkane oxidation directly to methanogenesis, or by syntrophic associations of bacteria with methanogenic archaea. However, metagenomic analyses of methanogenic environments have revealed other archaea with potential for alkane degradation but apparent inability to form methane, suggesting the existence of other modes of syntrophic hydrocarbon degradation. Here, we provide experimental evidence supporting the existence of a third mode of methanogenic degradation of hydrocarbons, mediated by syntrophic cooperation between archaeal partners. We collected sediment samples from a hot spring sediment in Tengchong, China, and enriched Hadarchaeota under methanogenic conditions at 60 °C, using hexadecane as substrate. We named the enriched archaeon Candidatus Melinoarchaeum fermentans DL9YTT1. We used 13C-substrate incubations, metagenomic, metatranscriptomic and metabolomic analyses to show that Ca. Melinoarchaeum uses alkyl-coenzyme M reductases (ACRs) to activate hexadecane via alkyl-CoM formation. Ca. Melinoarchaeum likely degrades alkanes to carbon dioxide, hydrogen and acetate, which can be used as substrates by hydrogenotrophic and acetoclastic methanogens such as Methanothermobacter and Methanothrix.
Subject(s)
Alkanes , Archaea , Methane , Alkanes/metabolism , Methane/metabolism , Archaea/metabolism , Archaea/genetics , Hot Springs/microbiology , Geologic Sediments/microbiology , Phylogeny , Oxidoreductases/metabolism , Oxidoreductases/genetics , China , Carbon Dioxide/metabolism , Biodegradation, Environmental , Oxidation-ReductionABSTRACT
The behavior of many plant enzymes depends on the metals and other ligands to which they are bound. A previous study demonstrated that tobacco Rubisco binds almost equally to magnesium and manganese and rapidly exchanges one metal for the other. The present study characterizes the kinetics of Rubisco and the plastidial malic enzyme when bound to either metal. When Rubisco purified from five C3 species was bound to magnesium rather than manganese, the specificity for CO2 over O2, (Sc/o) increased by 25% and the ratio of the maximum velocities of carboxylation / oxygenation (Vcmax/Vomax) increased by 39%. For the recombinant plastidial malic enzyme, the forward reaction (malate decarboxylation) was 30% slower and the reverse reaction (pyruvate carboxylation) was three times faster when bound to manganese rather than magnesium. Adding 6-phosphoglycerate and NADP+ inhibited carboxylation and oxygenation when Rubisco was bound to magnesium and stimulated oxygenation when it was bound to manganese. Conditions that favored RuBP oxygenation stimulated Rubisco to convert as much as 15% of the total RuBP consumed into pyruvate. These results are consistent with a stromal biochemical pathway in which (1) Rubisco when associated with manganese converts a substantial amount of RuBP into pyruvate, (2) malic enzyme when associated with manganese carboxylates a substantial portion of this pyruvate into malate, and (3) chloroplasts export additional malate into the cytoplasm where it generates NADH for assimilating nitrate into amino acids. Thus, plants may regulate the activities of magnesium and manganese in leaves to balance organic carbon and organic nitrogen as atmospheric CO2 fluctuates.
Subject(s)
Chloroplasts , Ribulose-Bisphosphate Carboxylase , Chloroplasts/metabolism , Ribulose-Bisphosphate Carboxylase/metabolism , Ligands , Carbon Dioxide/metabolism , Manganese/metabolism , Carbon Cycle , Oxygen/metabolism , Photosynthesis/physiology , Magnesium/metabolism , Metals/metabolism , Kinetics , Carbon/metabolism , Malates/metabolism , Malate Dehydrogenase/metabolismABSTRACT
This study aimed to evaluate the effect of chemical gasification and HEPES as alternative systems to pH control during in vitro maturation on bovine oocytes competence. Groups of 20 bovine cumulus oocytes complexes (COCs) were randomly distributed and cultured for 24 h in one of the following experimental groups: (i) chemical reaction (ChRG) system: CO2 generated from sodium bicarbonate and citric acid reaction (ii) culture media TCM-HEPES (HEPES-G); and (iii) control group (CNTG) in conventional incubator. After in vitro maturation (IVM), the COCs were in vitro fertilized (IVF), and in vitro cultivated (IVC) in a conventional incubator. We evaluated oocyte nuclear maturation, cleavage and blastocyst rates, in addition to the relative mRNA expression of BAX, BMP-15, AREG and EREG genes in oocytes and cumulus cells. The proportion of oocytes in metaphase II was higher in CNTG and ChRG (77.57% and 77.06%) than in the HEPES-G (65.32%; p = .0408 and .0492, respectively). The blastocyst production was similar between CNTG and ChRG (26.20% and 28.47%; p = .4232) and lower (p = .001) in the HEPES-G (18.71%). The relative mRNA expression of BAX gene in cumulus cells was significantly higher (p = .0190) in the HEPES-G compared to the CNTG. Additionally, the relative mRNA expression of BMP-15 gene was lower (p = .03) in oocytes from HEPES-G compared to the CNTG. In conclusion, inadequate atmosphere control has a detrimental effect on oocyte maturation. Yet, the use of chemical gasification can be an efficient alternative to bovine COCs cultivation.
Subject(s)
Fertilization in Vitro , In Vitro Oocyte Maturation Techniques , Oocytes , Animals , Cattle , In Vitro Oocyte Maturation Techniques/veterinary , In Vitro Oocyte Maturation Techniques/methods , Oocytes/drug effects , Fertilization in Vitro/veterinary , Female , Culture Media , Blastocyst/drug effects , Cumulus Cells/drug effects , Carbon Dioxide/pharmacology , Sodium Bicarbonate/pharmacology , Citric Acid/pharmacology , Embryo Culture Techniques/veterinaryABSTRACT
To non-destructively and rapidly monitor the chlorophyll content of winter wheat leaves under CO2 microleakage stress, and to establish the quantitative relationship between chlorophyll content and sensitive bands in the winter wheat growing season from 2023 to 2024, the leakage rate was set to 1 L/min, 3 L/min, 5 L/min, and 0 L/min through field experiments. The dimensional reduction was realized, fractional differential processing of a wheat canopy spectrum was carried out, a multiple linear regression (MLR) and partial least squares regression (PLSR) estimation model was constructed using a SPA selection band, and the model's accuracy was evaluated. The optimal model for hyperspectral estimation of wheat SPAD under CO2 microleakage stress was screened. The results show that the spectral curves of winter wheat leaves under CO2 microleakage stress showed a "red shift" of the green peak and a "blue shift" of the red edge. Compared with 1 L/min and 3 L/min, wheat leaves were more affected by CO2 at 5 L/min. Evaluation of the accuracy of the MLR and PLSR models shows that the MLR model is better, where the MLR estimation model based on 1.1, 1.8, 0.4, and 1.7 differential SPAD is the best for leakage rates of 1 L/min, 3 L/min, 5 L/min, and 0 L/min, with validation set R2 of 0.832, 0.760, 0.928, and 0.773, which are 11.528, 14.2, 17.048, and 37.3% higher than the raw spectra, respectively. This method can be used to estimate the chlorophyll content of winter wheat leaves under CO2 trace-leakage stress and to dynamically monitor CO2 trace-leakage stress in crops.
Subject(s)
Carbon Dioxide , Chlorophyll , Plant Leaves , Triticum , Triticum/metabolism , Triticum/chemistry , Plant Leaves/chemistry , Plant Leaves/metabolism , Carbon Dioxide/metabolism , Chlorophyll/metabolism , Chlorophyll/chemistry , Least-Squares Analysis , Linear Models , Spectrum Analysis/methods , Seasons , Stress, Physiological/physiologyABSTRACT
Purpose: The purpose of this study was to evaluate the environmental impact of travel and anesthetic gas emissions associated with treating early childhood caries at a single institution. Methods: Outpatient preventive, treatment, and modeled general anesthesia (GA) cases in children 71 months old and younger were included in this retrospective chart review. The main outcomes were kilograms of carbon dioxide equivalents (kgCO2e) for travel- and anesthetic gas-related emissions. Descriptive statistics and non-parametric tests were used. Results: Most subjects had a caries treatment visit (n equals 3,630 out of 5,767), and nine percent of treatment visits (n equals 353 out of 3,630) received nitrous oxide (N2O), which added 29.4 kgCO2eto the visit emissions. Children without caries treatment had lower travel-related emissions (median equals 7.5 kgCO2e; interquartile range [IQR] equals 7.6) than children with caries treatment (median without N2O equals 8.7 kgCO2e; IQR equals 18.2; median with N2O equals 8.4 kgCO2e; IQR equals 10.3). Modeled GA travel emissions were estimated at 16.4 kgCO2e (IQR equals 21.9) with between 3.8-12.9 kgCO2e in anesthetic gas emissions. Total emissions were greatest for N2O treatment visits (median equals 43.3 kgCO2e; IQR equals 22.8). Conclusions: Travel-related emissions were greatest for children requiring caries treatment. Minimizing patient travel may reduce environmental impact. Nitrous oxide contributes a significant amount to a dental visit???s environmental impact. Community-focused models of care and applying systematic and practical case selection to reduce excess N2O emissions could reduce dental care-related carbon emissions.
Subject(s)
Anesthetics, Inhalation , Dental Caries , Nitrous Oxide , Humans , Dental Caries/prevention & control , Child, Preschool , Retrospective Studies , Nitrous Oxide/analysis , Nitrous Oxide/administration & dosage , Infant , Anesthetics, Inhalation/adverse effects , Anesthetics, Inhalation/administration & dosage , Female , Male , Carbon Dioxide/analysis , Anesthesia, General , Anesthesia, Dental , Dental Care for ChildrenABSTRACT
The construction and optimization of microbial cell factories are crucial steps and key technologies in achieving green biomanufacturing. As concern has been aroused regarding the excessive carbon dioxide (CO2) emissions and food security, a new and promising research field, microbial conversion of CO2 into food compounds, has emerged. The research in this field not only holds significant implications for achieving the carbon peaking and carbon neutrality goals but also plays a role in maintaining food security. This paper provides a comprehensive review and outlook of the research on utilizing CO2 and its derived low-carbon chemicals for the production of food compounds, focusing on the production of glucose, sugar derivatives, and single-cell proteins and the development of artificial CO2 fixation pathways.
Subject(s)
Carbon Dioxide , Glucose , Carbon Dioxide/metabolism , Glucose/metabolism , Carbon/metabolism , Carbon/chemistry , Industrial Microbiology/methods , Bacteria/metabolismABSTRACT
We present methods and insights for the design of CO2 capture, transport, and storage systems for industrial facilities with a case study focus on Louisiana. Our analytical framework includes (1) evaluating the scale and concentration of capturable CO2 emissions at individual facilities for the purpose of estimating the cost of CO2 capture retrofits that utilize various energy supply sources to meet parasitic demands; (2) screening to identify potential CO2 storage sites and estimate their capacities, injectivities, and costs; and (3) designing cost-minimized trucking or pipeline infrastructure connecting CO2 capture plants with storage sites, considering existing land uses, demographics, and a variety of social and environmental justice factors. Estimated levelized costs of capture at Louisiana's 190 industrial facilities range from below $50/tCO2 to above $500/tCO2, depending on facility-specific features. We identified 98 potential storage sites with storage costs ranging from $8 to $17/tCO2. We find that in most situations, pipelines are the least-costly mode of CO2 transport. When industrial facilities in a region share pipelines, aggregate pipeline mileage and average transport costs are dramatically lower than without sharing. Shared pipeline networks designed to avoid disadvantaged communities require right-of-way areas compared to those for networks that transect such communities, but result in 25% higher average per-tonne transport cost.
Subject(s)
Carbon Dioxide , Louisiana , Transportation , Industry , Air PollutantsABSTRACT
Efforts to stabilize the global climate change while also continuing human development depend upon "decoupling" economic growth from fossil fuel CO2 emissions. However, evaluations of such decoupling have typically relied on production-based emissions, which do not account for emissions embodied in international trade. Yet international trade can greatly change emissions accounting and reshape the decoupling between emissions and economic growth. Here, we evaluate decoupling of economic growth from different accounts of emissions in each of the 159 countries and analyze the drivers of decoupling. We find that between 1995 and 2015, although 29 countries exhibited strong decoupling of territorial emissions (growing economies and decreasing emissions), only 19 countries achieved economic growth while their consumption-based emissions decreased. Most developed countries have achieved decoupling of emissions related to domestic goods and services, but have not achieved decoupling of emissions related to imported goods and services. The U-test confirms that the domestic component of consumption-based emissions exhibits a stronger decoupling trend from gross domestic product (GDP) growth than consumption-based emissions, and emissions from imports continue to rise with GDP per capita without a corresponding decline, providing a statistical validation of the decoupling analysis. Moreover, in the countries where economic growth and consumption-based emissions are most decoupled, a key driver is decreasing emissions intensity due to technological progressâand especially reductions in the intensity of imported goods and services. Our results reveal the importance of assessing decoupling using consumption-based emissions; successful decoupling may require international cooperation and coordinated mitigation efforts of trading partners.
Subject(s)
Economic Development , Commerce , Gross Domestic Product , Climate Change , Carbon Dioxide/analysis , Humans , Fossil FuelsABSTRACT
Carbon dioxide rebreathing (CO2 rebreathing) significantly influences respiratory drive and the work of breathing during BiPAP ventilation. We analyzed CO2 movement during BiPAP ventilation to find a method of real time detection of CO2 rebreathing without the need of CO2 concentration measurement sampled from the circuit (method expensive and not routinely used). Observational study during routine care in 15 bed university hospital ICU. At 18 patients who required BiPAP ventilation, intubated or during noninvasive ventilation, during weaning period airflow, pressure and CO2 concentration signals were registered on both sides of venting port and 17 respiratory parameters were measured or calculated for each of 4747 respiratory cycles analyzed. Based on CO2 movement (expiration-inspiration sequences) 3 types of cycle were identified, type I and II do not induce rebreathing but type III does. To test differences between the 3 types ANOVA, t-tests, and canonical discriminant analysis (CDA) were used. Then a multilayer perceptron (MLP) network, a type of artificial neural network, using the above parameters (excluding CO2 concentration) was applied to automatically identify the three types of respiratory cycles. Of the 4747 respiratory cycles, 1849 were type I, 1545 type II, and 1353 type III. ANOVA and t-tests showed significant differences between the types of respiratory cycles. CDA confirmed a correct apportionment of 93.9% of the cycles; notably, of 97.9% of type III. MLP automatically classified the respiratory cycles into the three types with 98.8% accuracy. Three types of respiratory cycles could be distinguished based on CO2 movement during BiPAP ventilation. Artificial neural networks can be used to automatically detect respiratory cycle type III, the only inducing CO2 rebreathing.
Subject(s)
Carbon Dioxide , Humans , Carbon Dioxide/metabolism , Carbon Dioxide/analysis , Male , Female , Middle Aged , Aged , Respiration, Artificial/methods , Neural Networks, Computer , Respiration , AdultABSTRACT
Tropical forests account for over 50% of the global terrestrial carbon sink, but climate change threatens to alter the carbon balance of these ecosystems. We show that warming and drying of tropical forest soils may increase soil carbon vulnerability, by increasing degradation of older carbon. In situ whole-profile heating by 4 °C and 50% throughfall exclusion each increased the average radiocarbon age of soil CO2 efflux by ~2-3 years, but the mechanisms underlying this shift differed. Warming accelerated decomposition of older carbon as increased CO2 emissions depleted newer carbon. Drying suppressed decomposition of newer carbon inputs and decreased soil CO2 emissions, thereby increasing contributions of older carbon to CO2 efflux. These findings imply that both warming and drying, by accelerating the loss of older soil carbon or reducing the incorporation of fresh carbon inputs, will exacerbate soil carbon losses and negatively impact carbon storage in tropical forests under climate change.
Subject(s)
Carbon Dioxide , Carbon , Climate Change , Forests , Soil , Tropical Climate , Soil/chemistry , Carbon Dioxide/metabolism , Carbon Dioxide/analysis , Carbon/metabolism , Carbon Cycle , Carbon Sequestration , EcosystemABSTRACT
Enhanced silicate rock weathering (ERW) is an emerging strategy for carbon dioxide removal (CDR) from the atmosphere to mitigate anthropogenic climate change. ERW aims at promoting soil inorganic carbon sequestration by accelerating geochemical weathering processes. Theoretically, ERW may also impact soil organic carbon (SOC), the largest carbon pool in terrestrial ecosystems, but experimental evidence for this is largely lacking. Here, we conducted a 2-year field experiment in tropical rubber plantations in the southeast of China to evaluate the effects of wollastonite powder additions (0, 0.25, and 0.5 kg m-2) on both soil organic and inorganic carbon at 0-10 cm depth. We found that ERW significantly increased the concentration of SOC and HCO3 -, but the increases in SOC were four and eight times higher than that of HCO3 - with low- and high-level wollastonite applications. ERW had positive effects on the accrual of organic carbon in mineral-associated organic matter (MAOM) and macroaggregate fractions, but not on particulate organic matter. Path analysis suggested that ERW increased MAOM mainly by increasing the release of Ca, Si, and Fe, and to a lesser extent by stimulating root growth and microbial-derived carbon inputs. Our study indicates that ERW with wollastonite can promote SOC sequestration in stable MOAM in surface soils through both the soil mineral carbon pump and microbial carbon pump. These effects may have been larger than the inorganic CDR during our experiment. We argue it is essential to account for the responses of SOC in the assessments of CDR by ERW.