The effect of adsorbent textural and functional properties on model naphthenic acid adsorption.

Naphthenic acids, NAs, are a major contaminant of concern and a focus of much research around remediation of oil sand process affected waters, OSPW. Using activated carbon adsorbents are an attractive option given their low cost of fabrication and implementation. A deeper evaluation of the effect NA structural differences have on uptake affinity is warranted. Here we provide an in-depth exploration of NA adsorption including many more model NA species than have been assessed previously with evaluation of adsorption kinetics and isotherms at the relevant alkaline pH of OSPW using several different carbon adsorbents with pH buffering to simulate the behaviour of real OSPW. Uptake for the NA varied considerably regardless of the activated carbon used, ranging from 350 mg/g to near zero highlighting recalcitrant NAs. The equilibrium data was explored to identify structural features of these species and key physiochemical properties that influence adsorption. We found that certain NA will be resistant to adsorption when hydrophobic adsorbents are used. Adsorption isotherm modelling helped explore interactions occurring at the interface between NA and adsorbent surfaces. We identified the importance of NA hydrophobicity for activated carbon uptake. Evidence is also presented that indicates favorable hydrogen bonding between certain NA and surface site hydroxyl groups, demonstrating the importance of adsorbent surface functionality for NA uptake. This research highlights the challenges associated with removing NAs from OSPW through adsorption and also identifies how adsorbent surface chemistry modification can be used to increase the removal efficiency of recalcitrant NA species.

Experimental and In Silico Comparative Study of Physicochemical Properties and Antimicrobial Activity of Carboxylate Ionic Liquids.

The COVID-19 pandemic highlighted the need to create and study new substances with improved lipophilicity and antimicrobial properties, such as ionic liquids (ILs), with easily tunable physicochemical properties. Most ILs possess strong antibacterial effects, but ILs containing the imidazolium cation are even more effective than the positive control. Thus, in this study, three ionic liquids with 1-butyl-3-methylimidazolium cation and various carboxylate anions (phenylacetate, benzoate, and 4-methoxyphenylacetate) were synthesized and fully characterized. The interactions between the cations and anions were discussed based on the experimental density, viscosity, and electrical conductivity. From the measured electrical conductivity and viscosity, the Walden plot is constructed and ionicity of the studied ILs is discussed. The similarities and dissimilarities among the studied ILs and their physicochemical properties are analyzed by applying the hierarchical cluster analysis and in silico calculated properties. The antimicrobial activity of the studied ionic liquids is tested on two bacterial (E. coli and P. aeruginosa) and three fungi (P. verrucosum, A. flavus, and A. parasiticus) strains, finding that they showed improved antimicrobial activity compared to the individual components.

One-Stage Pathway from Hollongdione to C17-Alkyne and Vinyl Chloride Following Mannich Bases and Carboxylic Acid.

Hollongdione is the first recorded example of the occurrence of a dammarane hexanor-triterpene in nature possessing antiviral and cytotoxic activity. Its simple one-stage transformation into compounds with terminal alkyne and vinyl chloride fragments via the interaction with phosphorus halides is reported. The copper(I)-catalyzed Mannich reaction of 3-oxo-22,23,24,25,26,27-hexanor-dammar-20(21)-in 3 led to a series of aminomethylated products, while 17-carboxylic acid was obtained by ozone oxidation of 3-oxo-22,23,24,25,26,27-hexanor-dammar-20-chloro-20(21)-en 4; the following direct amidation of the latter has been developed. The structures of all new molecules were established by spectroscopic studies that included 2D NMR correlation methods; the molecular structures of compounds 2-5 were determined by X-ray analysis.

Advances in LDI-MS Analysis: The Role of Chemical Vapor Deposition-Synthesized Silver Nanoparticles in Enhancing Detection of Low-Molecular-Weight Biomolecules.

In this investigation, we detail the synthesis of silver nanoparticles (AgNPs) via a precise chemical vacuum deposition (CVD) methodology, aimed at augmenting the analytical performance of laser desorption/ionization mass spectrometry (LDI-MS) for the detection of low-molecular-weight analytes. Employing a precursor supply rate of 0.0014 mg/s facilitated the formation of uniformly dispersed AgNPs, characterized by SEM and AFM to have an average diameter of 33.5 ± 1.5 nm and a surface roughness (Ra) of 11.8 nm, indicative of their homogeneous coverage and spherical morphology. XPS and SEM-EDX analyses confirmed the metallic silver composition of the nanoparticles with Ag peak splitting, reflecting the successful synthesis of metallic Ag. Comparative analytical evaluation with traditional MALDI matrices revealed that AgNPs significantly reduce signal suppression, thereby enhancing the sensitivity and specificity of LDI-MS for low-molecular-weight compounds such as triglycerides, saccharides, amino acids, and carboxylic acids. Notably, the application of AgNPs demonstrated a superior linear response for triglyceride signals with regression coefficients surpassing 0.99, markedly outperforming conventional matrices. The study further extends into quantitative analysis through nanoparticle-based laser desorption/ionization (NALDI), where AgNPs exhibited enhanced ionization efficiency, characterized by substantially lower limits of detection (LOD) and quantification (LOQ) for tested standards. Particular attention was paid to lipids with a detailed examination of their fragmentation pathways. These results highlight the significant potential of AgNPs synthesized via CVD to transform the analytical detection and quantification of low-molecular-weight compounds using NALDI. This approach offers a promising avenue for expanding the scope of analytical applications in mass spectrometry and introducing innovative methodologies for enhanced precision and sensitivity.

Generation and Coupling of Radical Species from α-Alkoxy Bridgehead Carboxylic Acid, Selenide, Telluride, Acyl Selenide, and Acyl Telluride.

α-Alkoxy bridgehead radicals enable intermolecular construction of sterically congested C-C bonds due to their sterically accessible nature. We implemented these radical species into total syntheses of various densely oxygenated natural products and demonstrated their exceptional versatility. Herein, we employed different precursors to generate the same α-alkoxy bridgehead radical and compared the efficacy of the precursors for coupling reactions. Specifically, the bridgehead radical of the trioxaadamantane structure was formed from α-alkoxy carboxylic acid, selenide/telluride, and acyl selenide/acyl telluride, and reacted with 4-((tert-butyldimethylsilyl)oxy)cyclopent-2-en-1-one and 5-oxo-1-cyclopentene-1-carbonitrile. The efficiency of the bridgehead radical formation and subsequent coupling reaction significantly depended on the structures of the precursors and acceptors as well as the reaction conditions. Our findings provide new insights for selecting the appropriate substrates of key coupling reactions in the total synthesis of complex natural products.

Phenanthroline and phenyl carboxylate mixed ligand copper complexes in developing drugs to treat cancer.

The success of a classic inorganic coordination compound, Cisplatin, cis-[Pt(NH3)2Cl2], as the first anticancer metallodrug started a field of research dedicated to discovering coordination compounds with antitumor activity, encompassing various metals. Among these, copper complexes have emerged as interesting candidates to develop drugs to treat cancer. In this work, mixed ligand complexes of Cu(II) with diimines (phenanthroline or 4-methylphenanthroline) and 3-(4-hydroxyphenyl)propanoate, phenylcarboxylate or phenylacetate were synthesized. They were characterized in the solid state, including a new crystal structure of [Cu2(3-(4-hydroxyphenyl)propanoate)3(phenanthroline)2]Cl·H2O. The obtained complexes presented a variety of stoichiometries. In solution, complexes were partially dissociated in the corresponding Cu-diimine complex. The complexes bound to the DNA by partial intercalation and groove binding, as assessed by Circular Dichroism, relative viscosity change and UV-Vis titration. The cytotoxicity of the complexes was determined in vitro on MDA-MB-231, MCF-7 (human metastatic breast adenocarcinomas, the first triple negative), MCF-10A (breast nontumoral), A549 (human lung epithelial carcinoma), and MRC-5 (human nontumoral lung epithelial cells), finding an activity higher than that of Cisplatin, although with less selectivity.

Ammonium carboxylates in the ammonia-Ugi reaction: one-pot synthesis of α,α-disubstituted amino acid derivatives including unnatural dipeptides.

Despite the remarkable developments of the Ugi reaction and its variants, the use of ammonia in the Ugi reaction has long been recognized as impractical and unsuccessful. Indeed, the ammonia-Ugi reaction often requires harsh reaction conditions, such as heating and microwave irradiation, and competes with the Passerini reaction, thereby resulting in low yields. This study describes a robust and practical ammonia-Ugi reaction protocol. Using originally prepared ammonium carboxylates in trifluoroethanol, the ammonia-Ugi reaction proceeded at room temperature in high yields and showed a broad substrate scope, thus synthesizing a variety of α,α-disubstituted amino acid derivatives, including unnatural dipeptides. The reaction required no condensing agents and proceeded without racemization of the chiral stereocenter of α-amino acids. Furthermore, using this protocol, we quickly synthesized a novel dipeptide, D-Leu-Aic-NH-CH2Ph(p-F), which exhibited a potent inhibitory activity against α-chymotrypsin with a Ki value of 0.091 µM.

Synthesis and Characterization of Folic Acid-Conjugated Terbium Complexes as Luminescent Probes for Targeting Folate Receptor-Expressing Cells.

Several conjugates between folic acid and a series of kinetically stable lanthanide complexes have been synthesized, using amide coupling and azide-alkyne cycloaddition methodologies to link the metal-binding domain to folate through a variety of spacer groups. While all these complexes exhibit affinity for the folate receptor, it is clear that the point of attachment to folate is essential, with linkage through the γ-carboxylic acid giving rise to significantly enhanced receptor affinity. All the conjugates studied show affinities consistent with displacing biological circulating folate derivatives, 5-methyltetrahydrofolate, from folate receptors. All the complexes exhibit luminescence with a short-lived component arising from ligand fluorescence overlaid on a much longer lived terbium-centered component. These can be separated using time-gating methods. From the results obtained, the most promising approach to achieve sensitized luminescence in these systems requires incorporating a sensitizing chromophore close to the lanthanide.

Postsynthetically Modified Cationic, Robust MOF Featuring Selective Separation of Carboxylate-Containing Pharmaceutical Drugs from Water at Neutral pH: Elucidation of the Adsorption Mechanism by Theory and Experiments.

The escalating levels of hazardous pharmaceutical contaminants, specifically nonsteroidal anti-inflammatory drugs (NSAIDs), in groundwater reservoir surfaces and surface waterway systems have prompted substantial scientific interest regarding their potential deleterious effects on both aquatic ecosystems and human health. Extraction of those pollutants from wastewater is quite challenging. Hence, the development of economic, sustainable, and scalable techniques for capturing and removing those pollutants is crucial to ensure water safety. Herein, we demonstrate a physicochemically stable, reusable, porous Hf(IV)-based cationic metal-organic framework (MOF), namely, 1'@MeCl for the aqueous phase adsorption-based removal of NSAIDs (diclofenac, naproxen, ibuprofen) from the wastewater environment. The highly positively charged surface of the 1'@MeCl MOF enables it to selectively extract more than 99% of diclofenac, naproxen, and ibuprofen contaminants within less than 30 s. With fast adsorption kinetics, very high adsorption capacities (Qe) were achieved at neutral pH for diclofenac (482.9 mg/g), naproxen (295.9 mg/g), and ibuprofen (219.5 mg/g). Moreover, the influence of changes in pH and coexisting anions on the adsorption property of the 1'@MeCl MOF was studied. Furthermore, the adsorption efficiency of 1'@MeCl in different real water environments was ensured by performing diclofenac, naproxen, and ibuprofen adsorption from tap, river, and lake water. Moreover, a 1'@MeCl-anchored cellulose acetate-chitosan membrane was developed successfully to demonstrate the membrane-based extraction of diclofenac, naproxen, and ibuprofen from contaminated water. Furthermore, a molecular-level mechanistic study was performed through experimental and computational study to propose the plausible adsorption mechanisms for diclofenac, naproxen, and ibuprofen over the surface of 1'@MeCl.

Identification and Characterization of a Blood-Brain Barrier Penetrant Inositol Hexakisphosphate Kinase (IP6K) Inhibitor.

Inositol hexakisphosphate kinases (IP6Ks) have been studied for their role in glucose homeostasis, metabolic disease, fatty liver disease, chronic kidney disease, neurological development, and psychiatric disease. IP6Ks phosphorylate inositol hexakisphosphate (IP6) to the pyrophosphate, 5-diphosphoinositol-1,2,3,4,6-pentakisphosphate (5-IP7). Most of the currently known potent IP6K inhibitors contain a critical carboxylic acid which limits blood-brain barrier (BBB) penetration. In this work, the synthesis and testing of a variety of carboxylic acid isosteres resulted in several new compounds with improved BBB penetration. The most promising compound has an IP6K1 IC50 of 16 nM with an improved brain/plasma ratio and a favorable pharmacokinetic profile. This series of brain penetrant compounds may be used to investigate the role of IP6Ks in CNS disorders.

Attenuation of phenylnaphthenic acids related to oil sands process water using solar activated calcium peroxide: Influence of experimental factors, mechanistic modeling, and toxicity evaluation.

Refractory naphthenic acids (NAs) are among the primary toxic compounds in oil sands process water (OSPW), a matrix with a complex chemical composition that poses challenges to its remediation. This study evaluated the effectiveness of calcium peroxide (CaO2) combined with solar radiation (solar/CaO2) as an advanced water treatment process for degrading model NAs (1,2,3,4-tetrahydronaphthalene-2-carboxylic acid, pentanoic acid, and diphenylacetic acid) in synthetic water (STW) and provide preliminary insights in treating real OSPW. Solar light and CaO2 acted synergistically to degrade target NAs in STW (>67 of synergistic factor) following a pseudo-first-order kinetic (R2 ≥ 0.95), with an optimal CaO2 dosage of 0.1 g L-1. Inorganic ions and dissolved organic matter were found to hinder the degradation of NAs by solar/CaO2 treatment; however, the complete degradation of NAs was reached in 6.7 h of treatment. The main degradation mechanism involved the generation of hydroxyl radicals (•OH), which contributed ∼90% to the apparent degradation rate constant (K), followed by H2O2 (4-5%) and 1O2 (0-5%). The tentative transformation pathways of three NAs were proposed, confirming an open-ring reaction and resulting in short-chain fatty acid ions as final products. Furthermore, a reduction in acute microbial toxicity and genotoxic effect was observed in the treated samples, suggesting that solar/CaO2 treatment exhibits high environmental compatibility. Furthermore, the solar/CaO2 system was successfully applied as a preliminary step for real-world applications to remove natural NAs, fluorophore organic compounds, and inorganic components from OSPW, demonstrating the potential use of this technology in the advanced treatment of oil-tailing-derived NAs.

Oxoammonium Salt-Mediated On-DNA Alcohol Oxidation for DEL Synthesis.

On-DNA carboxylic acids are important synthetic intermediates in the synthesis of DNA-encoded library (DEL) structures. Herein, we report an oxoammonium salt-mediated, room temperature, solution-phase oxidation of DNA-linked primary alcohols into carboxylic acids. This method exhibits a wide substrate scope, encompassing aliphatic, benzylic, and heterobenzylic alcohols, and is compatible with DEL encoding strategies. This advancement facilitates a DEL strategy to utilize unprotected alcohols as inert, masked carboxylic acids and enables access to noncommercial bifunctional carboxyl intermediates to enhance the accessible chemical diversity within DELs.

Nano zero valent iron stimulated acetaldehyde oxidation, electron transfer, and RBO pathway for enhanced medium-chain carboxylic acids production.

Nano zero-valent iron (NZVI) has been shown to effectively enhance the chain elongation (CE) process, addressing the issue of limited yield of medium-chain carboxylic acids (MCCA) from organic wastewater. However, the specific impact of NZVI on the metabolism of CE bacteria (CEB) is not well understood. In this study, it was aimed to investigate the mechanism by which an optimal concentration of NZVI influences CE metabolism, particularly in relation to ethanol oxidation, electron transfer, and MCCA synthesis. This was achieved through single-factor influence experiments and metagenomic analysis. The results showed that the addition of 1 g/gVSS NZVI achieved the highest MCCA yield (n-caproic acid + n-octanoic acid) at 2.02 g COD/L, which was 4.9 times higher than the control. This improvement in MCCA production induced by NZVI was attributed to several factors. Firstly, NZVI facilitated the oxidation of acetaldehyde, leading to its reduced accumulation in the system (from 18.4 % to 5.8 %), due to the optimized chemical environment created by NZVI corrosion, including near-neutral pH and a more reductive oxidation-reduction potential (ORP). Additionally, the inherent conductivity property of NZVI and the additional Fe ions released during corrosion improved the electron transfer efficiency between CEB. Lastly, both the composition of microbial communities and the abundance of unique enzyme genes confirmed the selective stimulation of NZVI on the reverse ß-oxidation (RBO) pathway. These findings provide valuable insights into the role of NZVI in CEB metabolism and its potential application for enhancing MCCA production in CE bioreactors.

Investigation on molecular and biomolecular spectroscopy of the novel 2BCA molecule to analyse its biological activities and binding interaction with nipah viral protein.

The molecule of 2-Biphenyl Carboxylic Acid (2BCA), which contains peculiar features, was explored making use of density functional theory (DFT) and experimental approaches in the area of quantum computational research. The optimised structure, atomic charges, vibrational frequencies, electrical properties, electrostatic potential surface (ESP), natural bond orbital analysis and potential energy surface (PES) were obtained applying the B3LYP approach with the 6-311++ G (d,p) basis set.. The 2BCA molecule was examined for possible conformers using a PES scan. The methods applied for spectral analyses included FT-IR, FT-RAMAN, NMR, and UV-Vis results. Vibrational frequencies for all typical modes of vibration were found using the Potential Energy Distribution (PED) data. The UV-Vis spectrum was simulated using the TD-DFT technique, which is also seen empirically. The Gauge-Invariant Atomic Orbital (GIAO) approach was employed to model and study the 13C and 1H NMR spectra of the 2BCA molecule in a CDCL3 solution. The spectra were then exploited experimentally to establish their chemical shifts. To predict the donor and acceptor interaction, the NBO analysis was used. The electrostatic potential surface was employed to anticipate the locations of nucleophilic and electrophilic sites. Hirshfeld surfaces and their related fingerprint plots are exploited for the investigation of intermolecular interactions. Reduced Density Gradient (RDG) helps to measure and illustrate electron correlation effects, offering precise insights into chemical bonding, reactivity, and the electronic structure of 2BCA. According to Lipinski and Veber's drug similarity criteria, 2BCA exhibits the typical physicochemical and pharmacokinetic properties that make it a potential oral pharmaceutical candidate. According to the findings of a molecular docking study, the 2BCA molecule has promise as a treatment agent for the Nipah virus (PDB ID: 6 EB9), which causes severe respiratory and neurological symptoms in humans.

Longifolene-Derived Primary Amine Carboxylates for Sustainable Weed Management: Synthesis and Herbicidal Activity.

Twelve novel longifolene-derived primary amine carboxylates were synthesized and evaluated for herbicidal activity. The structures of title compounds were confirmed by Fourier-transform infrared spectroscopy, 1H nuclear magnetic resonance (NMR), 13C NMR, and high-resolution mass spectrometry. The results showed that all the synthesized compounds exhibited higher herbicidal activity than the corresponding carboxylic acids involved in the reaction and the commercial herbicide glyphosate; some of them even possessed inhibition rates of 100% against Lolium multiflorum Lam. and Brassica campestris at low concentrations (0.039-0.313 mmol/L). Moreover, structural factors, including types of carboxylates and carbon chain length, had a great influence on the herbicidal performance. The herbicidal activity of dicarboxylates was similar to or much higher than that of corresponding monocarboxylates and glyphosate. Furthermore, compound 5l was found to be the most active candidate against the root and shoot growth of L. multiflorum Lam. and B. campestris with half maximal inhibitory concentrations (IC50) of around 0.010 and 0.023 mmol/L. The present work indicated that those prepared compounds have great potential to serve as high-performance botanical herbicides used at low doses.

Electron bifurcation and fluoride efflux systems implicated in defluorination of perfluorinated unsaturated carboxylic acids by Acetobacterium spp.

Enzymatic cleavage of C─F bonds in per- and polyfluoroalkyl substances (PFAS) is largely unknown but avidly sought to promote systems biology for PFAS bioremediation. Here, we report the reductive defluorination of α, ß-unsaturated per- and polyfluorocarboxylic acids by Acetobacterium spp. The microbial defluorination products were structurally confirmed and showed regiospecificity and stereospecificity, consistent with their formation by enzymatic reactions. A comparison of defluorination activities among several Acetobacterium species indicated that a functional fluoride exporter was required for the detoxification of the released fluoride. Results from both in vivo inhibition tests and in silico enzyme modeling suggested the involvement of enzymes of the flavin-based electron-bifurcating caffeate reduction pathway [caffeoyl-CoA reductase (CarABCDE)] in the reductive defluorination. This is a report on specific microorganisms carrying out enzymatic reductive defluorination of PFAS, which could be linked to electron-bifurcating reductases that are environmentally widespread.

Synthesis of 2-Ethylhexyl 5-Bromothiophene-2-Carboxylates; Antibacterial Activities against Salmonella Typhi, Validation via Docking Studies, Pharmacokinetics, and Structural Features Determination through DFT.

A new class of thiophene-based molecules of 5-bromothiophene-2-carboxylic acid (1) have been synthesized in current research work. All analogs 4A-4G were synthesized with optimized conditions by coupling reactions of 2-ethylhexyl 5-bromothiophene-2-carboxylate (3) with various arylboronic acids. The results indicated that the majority of compounds showed promising effective in vitro antibacterial activity. Herein, 2-ethylhexyl-5-(p-tolyl)thiophene-2-carboxylate (4F), in particular among the synthesized analogs, showed outstanding antibacterial action (MIC value 3.125 mg/mL) against XDR Salmonella Typhi compared to ciprofloxacin and ceftriaxone. The intermolecular interaction was investigated by using a molecular docking study of thiophene derivatives 4A-4G against XDR S. Typhi. The values of the binding affinity of functionalized thiophene molecules and ciprofloxacin were compared against bacterial enzyme PDB ID: 5ztj. Therefore, 4F appears to be a promising antibacterial agent and showed the highest potential value. Density functional theory (DFT) calculations were executed to examine the electronic, structural, and spectroscopic features of the newly synthesized molecules 4A-4G.

New MMO coatings for electro-refinery applications: Promoting the production of carboxylates.

Within the new circular economy paradigm, this work evaluates the performance of tailored mixed metal oxides (MMO) anodes, based on ruthenium and antimony, for their application into an electrochemically-assisted organic refinery process. This process is designed to transform pollutants into value-added products with minimal mineralization. Oxidation of synthetic wastes consisting of phenol solutions was used to validate the electrochemical conversion of phenolic wastes into carboxylates, which are then considered as bricks to be used for electrosynthesis or to produce fuels. The MMO anodes were manufactured using two synthesis routes (Pechini method and ionic liquid method), each followed by one of three different heating treatments: furnace, microwave, and CO2 laser. The selection of the optimal electrode for the organic electrorefinery was based on a combination of physical and electrochemical properties, degradation performance of phenol to carboxylates, and long-term stability, looking for a truly sustainable solution. Results indicate that anodes synthesized by the ionic liquid (IL) method, regardless of the heating treatment, demonstrated superior performance, with larger active areas (with furnace 82 mC cm-2, microwave 97 mC cm-2, and laser 127 mC cm-2) and higher phenol degradation rates, resulting in a greater generation of carboxylates during electrolysis, yielding primarily oxalate and achieving up to 40% conversion with furnace heating. However, laser-treated anodes exhibited greater stability than furnace-made ones, attributed to the formation of an insulating TiO2 layer. Although the electrode with the longest service life did not show the best catalytic properties for minimizing mineralization, the observed variations in coatings with identical chemical compositions highlight the importance of this research. This study positions itself at the forefront of developing more efficient and sustainable electrochemical technologies for organic waste treatment.

Oxidative Carboxylation of Lignin: Exploring Reactivity of Different Lignin Types.

The increased interest in the utilization of lignin in biobased applications is evident from the rise in lignin valorization studies. The present study explores the responsiveness of lignin toward oxidative valorization using acetic acid and hydrogen peroxide. The pristine lignins and their oxidized equivalents were analyzed comprehensively using NMR and SEC. The study revealed ring opening of phenolic rings yielding muconic acid- and ester-end groups and side-chain oxidations of the benzylic hydroxyls. Syringyl units were more responsive to these reactions than guaiacyl units. The high selectivity of the reaction yielded oligomeric oxidation products with a narrower dispersity than pristine lignins. Mild alkaline hydrolysis of methyl esters enhanced the carboxylic acid content of oxidized lignin, presenting the potential to adjust the carboxylic acid content of lignin. While oxidation reactions in lignin valorization are well documented, this study showed the feasibility of employing optimized oxidation conditions to engineer tailored lignin-based material precursors.

Combined experimental and computational investigation of tetrabutylammonium bromide-carboxylic acid-based deep eutectic solvents.

Aiming at shedding light on the molecular interactions in deep eutectic solvents (DESs), the DESs based on tetrabutylammonium bromide (TBAB) as hydrogen bond acceptor (HBA) and carboxylic acids (CAs) (formic acid (FA), oxalic acid (OA), and malonic acid (MA)) as hydrogen bond donor (HBD) were investigated by both experimental and theoretical techniques. The thermal behaviors of the prepared DESs were investigated by differential scanning calorimetry (DSC) method. In order to study the hydrogen bond formation between the DESs constituents, the FT-IR analysis was carried out. The large positive deviations of the iso solvent activity lines of ternary HBA + HBD + 2-propanol mixtures determined by the isopiestic technique from the semi-ideal behavior indicate that CAs interact strongly with TBAB and therefore they can form DESs. Molecular dynamics (MD) simulations were performed to present an atomic-scale image of the components and describe the microstructure of DESs. From the MD simulations, the radial distribution functions (RDFs), coordination numbers (CNs), combined distribution functions (CDFs), and spatial distribution functions (SDFs) were calculated to investigate the interaction between the components and three-dimensional visualization of the DESs. The obtained results confirmed the importance of hydrogen bonds in the formation of TBAB/CAs DESs.