RNA Analysis Using Immunoassay Detection Format.

Oligonucleotide probe tagging and reverse transcriptase polymerase-chain reaction (RT-PCR) are the most widely used techniques currently used for detecting and analyzing RNA. RNA detection using labeled oligonucleotide probe-based approaches is suitable for point-of-care (POC) applications but lacks assay sensitivity, whereas RT-PCR requires complex instrumentation. As an alternative, immunoassay detection formats coupled with isothermal RNA amplification techniques have been proposed for handheld assay development. In this chapter, we describe a robust technique comprising of: (a) target RNA tagging with a complementary oligonucleotide probe labeled with a hapten moiety to form a DNA/RNA duplex hybrid; (b) complexing the DNA/RNA duplex with a pre-coated antibody (Ab) directed at the hapten moiety; (c) sandwich complex formation with an Ab that selectively recognizes the DNA/RNA structural motif; and (d) detection of the sandwich complex using a secondary Ab enzyme conjugate targeting the anti-DNA/RNA Ab followed by standard enzyme-linked immunosorbent assay (ELISA) visualization.

Basic evaluation of the CRISPR/Cas system stability for application to paper-based analytical devices.

Despite the promising features of the CRISPR/Cas system for application to point-of-care nucleic acid tests, there are only a few reports on its integration into paper-based analytical devices (PADs) for the purpose of assay simplification. In most cases, paper platforms have only been used for the final signal readout in an assay otherwise performed in a test tube. Therefore, there is very limited information on the suitability of the CRISPR/Cas system for on-device reagent storage. To fill this gap, the current work primarily investigated the influence of various factors, including the type of paper, reagent drying method, effect of stabilizers, and storage condition on the storage stability of reagents necessary for CRISPR-based assays on paper substrates, by comparing the fluorescence signal emitted by the trans-cleavage of the dsDNA-activated Cas12a complex. The results obtained in the form of fluorescence signals emitted after trans-cleavage of a ssDNA probe through a dsDNA-activated Cas12a complex on paper substrates showed that CRISPR-related reagents spontaneously dried at room temperature on BSA blocked paper retained over 70% of their initial activity when stored at -20 °C for 28 days, independent of the type of paper substrates, which was improved by the addition of sucrose as a stabilizer. In addition, reagents dried on paper substrates under the optimized conditions exhibited stronger heat tolerance at temperatures above 65 °C compared to their corresponding solutions. This work is expected to contribute to the future development of fully integrated PADs relying on CRISPR/Cas systems for point-of-care applications requiring no additional reagent handling.

Magnetic-gold nanoparticle-mediated paper-based biosensor for highly sensitive colorimetric detection of food adulteration.

Food adulteration presents a significant challenge due to the evasion of legal oversight and the difficulty of identification. Addressing this issue, there is an urgent need for on-site, rapid, visually based small-scale equipment, along with large-scale screening technology, to enable prompt results without providing opportunities for dishonest traders to react. Colorimetric reactions offer advantages in terms of speed, visualization, and miniaturization. However, there is a scarcity of suitable colorimetric reactions for food adulteration detection, and interference from colored food impurities and easily comparable color results affects accuracy. To overcome limitations, this study introduces a novel approach utilizing polydopamine magnetic nanoparticles to enrich DNA in food samples, effectively eliminating interfering components. By employing gold nanoparticles to generate magnetic-gold nanoparticles, a single magnetic bead achieves simultaneous enrichment, impurity removal, and detection. The use of paper-based biosensors and visualization equipment allows for the visualization and digital analysis of results, achieving a low detection limit of 4.59 nmol mL-1. The method also exhibits high accuracy and repeatability, with a RSD ranging from 1.6 % to 4.0 %. This innovative colorimetric method addresses the need for rapid, miniaturized, and large-scale detection, thus providing a solution for food adulteration challenges.

Quantitative study on a simple electrochemical dsDNA-pregabalin biosensor; multi-spectroscopic, molecular docking and modelling studies.

Pregabalin (PGB) is a γ-aminobutyric acid (GABA) alkylated analog prescribed to treat neuropathic pain, fibromyalgia, and postherpetic neuralgia. Using analytical, spectroscopic methods and molecular docking and molecular dynamics (MD) simulations, a detailed experimental and theoretical investigation was conducted into the binding process and interactions between PGB and double-stranded fish sperm deoxyribonucleic acid (dsDNA). It was evident from the collected experimental results that PGB binds with ds-DNA. PGB attaches to dsDNA via minor groove binding, as demonstrated by the results of electrochemical studies, UV-Vis absorption spectroscopy, and replacement study with ethidium bromide and Hoechst-32588. PGB's binding constant (Kb) with dsDNA, as determined by the Benesi-Hildebrand plot, is 2.41×104 ± 0.30 at 298 K. The fluorescence investigation indicates that PGB and dsDNA have a binding stoichiometry (n) of 1.21 ± 0.09. Molecular docking simulations were used in the research to computational determination of the interactions between PGB and dsDNA. The findings demonstrated that minor groove binding was the mechanism by which PGB interacted with dsDNA. Based on the electrochemically responsive PGB-dsDNA biosensor, we developed a technique for low-concentration detection of PGB utilizing differential pulse voltammetry (DPV). The voltammetric analysis of the peak current decrease in the deoxyadenosine oxidation signals resulting from the association between PGB and dsDNA enabled a sensitive estimation of PGB in pH 4.80 acetate buffer. The deoxyguanosine oxidation signals exhibited a linear relationship between 2 and 16 µM PGB. The values for the limit of detection (LOD) and limit of quantitation (LOQ) were 0.57 µM and 1.91 µM, respectively.

Looking into the Quantification of Forensic Samples with Real-Time PCR.

The quantification of human DNA extracts from forensic samples plays a key role in the forensic genetics process, ensuring maximum efficiency and avoiding repeated analyses, over-amplified samples, or unnecessary examinations. In our laboratory, we use the Quantifiler® Trio system to quantify DNA extracts from a wide range of samples extracted from traces (bloodstains, saliva, semen, tissues, etc.), including swabs from touched objects, which are very numerous in the forensic context. This method has been extensively used continuously for nine years, following an initial validation process, and is part of the ISO/IEC 17025 accredited method. In routine practice, based on the quantitative values determined from the extracts of each trace, we use a standard method or a low-copy-number method that involves repeating the amplification with the generation of a consensus genetic profile. Nowadays, when the quantification results are less than 0.003 ng/µL in the minimum extraction volume (40 µL), we do not proceed with the DNA extract analysis. By verifying the limits of the method, we make a conscious cost-benefit choice, in particular by using the least amount of DNA needed to obtain sufficiently robust genetic profiles appropriate for submission to the Italian DNA Forensic Database. In this work, we present a critical re-evaluation of this phase of the method, which is based on the use of standard curves obtained from the average values of the control DNA analysed in duplicate. Considering the various contributions to uncertainty that are difficult to measure, such as manual pipetting or analytical phases carried out by different operators, we have decided to thoroughly investigate the contribution of variability in the preparation of calibration curves to the final results. Thus, 757 samples from 20 independent experiments were re-evaluated using two different standards for the construction of curves, determining the quantitative differences between the two methods. The experiments also determined the parameters of the slope, Y-intercept, R2, and the values of the synthetic control probe to verify how these parameters can provide information on the final outcome of each analysis. The outcome of this revalidation demonstrated that it is preferable to use quantification ranges rather than exact quantitative limits before deciding how to analyse the extracts via PCR or forgoing the determination of profiles. Additionally, we present some preliminary data related to the analysis of samples that would not have been analysed based on the initial validation, from which genetic profiles were obtained after applying a concentration method to the extracts. Our goal is to improve the accredited analytical method, with a careful risk assessment as indicated by accreditation standards, ensuring that no source of evidence is lost in the reconstruction of a criminal event.

Quality considerations and major pitfalls for high throughput DNA-based newborn screening for severe combined immunodeficiency and spinal muscular atrophy.

BACKGROUND: Many newborn screening programs worldwide have introduced screening for diseases using DNA extracted from dried blood spots (DBS). In Germany, DNA-based assays are currently used to screen for severe combined immunodeficiency (SCID), spinal muscular atrophy (SMA), and sickle cell disease (SCD). METHODS: This study analysed the impact of pre-analytic DNA carry-over in sample preparation on the outcome of DNA-based newborn screening for SCID and SMA and compared the efficacy of rapid extraction versus automated protocols. Additionally, the distribution of T cell receptor excision circles (TREC) on DBS cards, commonly used for routine newborn screening, was determined. RESULTS: Contaminations from the punching procedure were detected in the SCID and SMA assays in all experimental setups tested. However, a careful evaluation of a cut-off allowed for a clear separation of true positive polymerase chain reaction (PCR) amplifications. Our rapid in-house extraction protocol produced similar amounts compared to automated commercial systems. Therefore, it can be used for reliable DNA-based screening. Additionally, the amount of extracted DNA significantly differs depending on the location of punching within a DBS. CONCLUSIONS: Newborn screening for SMA and SCID can be performed reliably. It is crucial to ensure that affected newborns are not overlooked. Therefore a carefully consideration of potential contaminating factors and the definition of appropriate cut-offs to minimise the risk of false results are of special concern. It is also important to note that the location of punching plays a pivotal role, and therefore an exact quantification of TREC numbers per µl may not be reliable and should therefore be avoided.

Preparation of a novel DNA-imprinted sensor based on chitosan and its highly sensitive detection of Pb2.

Lead ion is very harmful to the environment, so it is very important to study its detection methods. In this study, a novel electrochemical sensor was constructed by modifying deoxyribonucleic acid (DNA) on the electrode, which can be used for the detection of Pb2+ in the environment. Part of the mixed solution of chitosan (CS) and Pb2+ template ions was dropped onto the surface of a glassy carbon electrode. CS-Pb2+ film was cross-linked through sodium tripolyphosphate. And a novel DNA-imprinted sensor was prepared by electrodepositing CS-Pb2+ thin film with gold nanoparticles (AuNPs), removing Pb2+ templates, and immobilizing specific double-stranded DNA. The electroactive area, surface morphology, sensitivity, and electrochemical reaction mechanism of the DNA-imprinted sensor were analyzed. The elementary reaction steps were studied through electrochemical reaction kinetics analysis. The experimental results indicate that the DNA-imprinted electrochemical biosensor can quantitatively detect Pb2+ in the range of 10-100 µM (R2 = 0.9935), and its detection limit is 6.5074 µM (3σ/slope). The sensitivity of the electrochemical biosensor is 1.55233 × 10-6 A/µM, and its active areas is 6.233 cm2. The desorption mechanism and adsorption mechanism have been explored through dynamic parameter analysis. The novel DNA imprinted electrochemical biosensor developed in this paper provides a robust method for detecting lead ions in solution. Additionally, it establishes a solid groundwork for detecting other metal ions.

Comparison of gender identification using exfoliated cells obtained from toothbrush and miswak: A longitudinal study.

Gender identification plays a pivotal role in forensic medicine. Among the various methods used for gender identification, deoxyribose nucleic acid (DNA) based methods are considered accurate. Exfoliated oral mucosal cells that are harvested from oral hygiene aids can be potentially used for gender identification using real-time polymerase chain rection (PCR). The aim of the present longitudinal study is to assess and compare the efficacy of toothbrush and miswak as potential tools to harvest exfoliated cells for gender identification. Forty healthy volunteers were recruited and asked to clean their teeth using new toothbrush and fresh miswak each day for 4 days. Toothbrush and miswak used by the participants were subjected to DNA analysis immediately, 1st, 2nd and 6th month. The absorbance of DNA samples were quantified and gender identification was done by amplification of sex determining gene-Sex determining region Y gene (SRY) and ALT1 genes using real-time PCR. The number of correct and positive identification for samples at various time points were tabulated and subjected to statistical analysis. Post hoc power analysis showed that the study had a power of 93%. Correct and positive gender identification was observed for the samples (100%) obtained using miswak, for tooth brush it reduced to 95%, 80%, and 35% at the end of 1st, 2nd, and 6th month. The differences seen at the end of 2nd month and 6th month were statistically significant. Miswak is a better tool to harvest exfoliated cells for gender identification when compared to a toothbrush. Hence, miswak can serve as a potential tool in forensic medicine for DNA extraction and subsequently victim identification.

Simple, fast, cost-efficient, reliable, and highly automated DNA content analysis of cells in adherent cultures.

The most commonly used flow cytometric (FCM) analysis of cellular DNA content relies on ethanol fixation followed by RNA digestion and propidium iodide (PI) intercalation into double-stranded DNA. This is a laborious and time-consuming procedure that is subject to systematic errors due to centrifugation and washing steps associated with sample preparation. It can adversely affect the reliability of the results. Here, we present a modified concept of DNA quantification in adherent cell lines by FCM that involves neither ethanol fixation nor any washing and cell transferring steps. Our high throughput assay of adherent cell lines reduces sample-processing time, requires minimal workload, provides a possibility for automation, and, if needed, also allows a significant reduction in the size of individual samples. Working with a well-proven commercial tool-The BD Cycletest™ Plus DNA Reagent Kit-primarily designed for cell cycle analysis and aneuploidy determination in experimental and clinical samples, we suggest a novel, very efficient, and robust approach for DNA research in adherent cell cultures.

Rapid molecular identification of Rana dybowskii by species-specific primers.

Oviductus Ranae is the dried oviduct from Rana dybowskii, a forest frog species with medicinal, tonic, and cosmetic properties. Due to the high price and resource shortage, counterfeit varieties of Oviductus Ranae often appear in the market. However, traditional identification methods cannot accurately differentiate between Oviductus Ranae and its adulterants. In this study, a rapid molecular identification method has been established. The method involves extracting genomic DNA in just 30 s using filter paper purification, species-specific rapid polymerase chain reaction (PCR) amplification, and finally, fluorescence detection of the products. It can accurately identify Oviductus Ranae and its three common adulterants in about 30 min, making the process simple, fast, and highly specific.

Digital Sort-Enabled Counting Allows Absolute Electrical Quantification of Target Nucleic Acid.

Quantitative nucleic acid amplification tests are of great importance for diagnostics, but current approaches require complex and costly optical setups that limit their nonlaboratory applications. Herein we describe the implementation of a microfluidics platform that can perform binary DNA-amplification-activated droplet sorting. The digital sort-enabled counting (DISCO) platform enables label-free absolute quantification of the nucleic acid. This is achieved by provoking a pH change in droplets through a loop-mediated isothermal amplification (LAMP) reaction, followed by using sorting by interfacial tension (SIFT) to direct positive and negative droplets to different outlets. With the use of on-chip electrodes at both outlets, we demonstrate that the digital electrical counting of target DNA and RNA can be realized. DISCO is a promising approach for realizing sensitive nucleic acid quantification in point-of-care settings.

PicoGreen assay for nucleic acid quantification - Applications, challenges, and solutions.

Various analytical methods and reagents have been employed for nucleic acid analysis in cells, biological fluids, and formulations. Standard techniques like gel electrophoresis and qRT-PCR are widely used for qualitative and quantitative nucleic acid analysis. However, these methods can be time-consuming and labor-intensive, with limitations such as inapplicability to small RNA at low concentrations and high costs associated with qRT-PCR reagents and instruments. As an alternative, PicoGreen (PG) has emerged as a valuable method for the quantitative analysis of nucleic acids. PG, a fluorescent dye, enables the quantitation of double-stranded DNA (dsDNA) or double-stranded RNA, including miRNA mimic and siRNA, in solution. It is also applicable to DNA and RNA analysis within cells using techniques like FACS and fluorescence microscopy. Despite its advantages, PG's fluorescence intensity is affected by various experimental conditions, such as pH, salts, and chemical reagents. This review explores the recent applications of PG as a rapid, cost-effective, robust, and accurate assay tool for nucleic acid quantification. We also address the limitations of PG and discuss approaches to overcome these challenges, recognizing the expanding range of its applications.

Nucleic acid-based electrochemical biosensors.

Colorectal cancer, breast cancer, oxidative DNA damage, and viral infections are all significant and major health threats to human health, presenting substantial challenges in early diagnosis. In this regard, a wide range of nucleic acid-based electrochemical platforms have been widely employed as point-of-care diagnostics in health care and biosensing technologies. This review focuses on biosensor design strategies, underlying principles involved in the development of advanced electrochemical genosensing devices, approaches for immobilizing DNA on electrode surfaces, as well as their utility in early disease diagnosis, with a particular emphasis on cancer, leukaemia, oxidative DNA damage, and viral pathogen detection. Notably, the role of biorecognition elements and nanointerfaces employed in the design and development of advanced electrochemical genosensors for recognizing biomarkers related to colorectal cancer, breast cancer, leukaemia, oxidative DNA damage, and viral pathogens has been extensively reviewed. Finally, challenges associated with the fabrication of nucleic acid-based biosensors to achieve high sensitivity, selectivity, a wide detection range, and a low detection limit have been addressed. We believe that this review will provide valuable information for scientists and bioengineers interested in gaining a deeper understanding of the fabrication and functionality of nucleic acid-based electrochemical biosensors for biomedical diagnostic applications.

Controllable concentric electric field line distribution for simultaneous separation of DNA.

An approach for the controllable separation and concentration of nucleic acid using a circular nonuniform electric field was proposed and developed. Using six different lengths of DNA molecules as standard samples, the distribution of the gradient electric field was increased from the outer circular electrode to the inner rod-shaped electrode, contributing to the migration of DNA molecules at a velocity gradient towards the region with the strongest inner electric field. The DNA molecules were arranged in a distribution of concentric circles that aligned with the distribution of concentric equipotential lines. The concentration of DNA multiplied with the alternation of radius. As a result, this platform allowed simultaneous DNA separation, achieving a resolution range of 1.17-3.03 through an extended electrophoresis time, resulting in enhanced concentration factors of 1.08-6.27. Moreover, the manipulation of the relative height of the inner and outer electrodes enabled precise control over the distribution and the deflection degree of electric field lines, leading to accurate control over DNA deflection.

Predictors of stool deoxyribonucleic acid test use in the United States: Implications for outreach to under-resourced populations.

OBJECTIVE: Although colorectal cancer screening (CRCS) is a public health priority, uptake is suboptimal in under-resourced groups. Noninvasive modalities, including stool deoxyribonucleic acid (sDNA) testing, may mitigate economic, geographic, cultural, or impairment-related barriers to CRCS. We assessed use of sDNA testing and other CRCS modalities in U.S. residents, comparing subgroups defined by several social determinants of health (SDOH). METHODS: A nationally representative sample of community-dwelling respondents aged 50-75 years self-reported use of CRCS modalities in the 2020 Behavioral Risk Factor Surveillance System Survey. Statistical analyses assessed up-to-date screening status and choice of modality in the recommended screening interval. RESULTS: Of 179,833 sampled respondents, 60.8% reported colonoscopy, 5.7% sDNA testing, 5.5% another modality. The rate of up-to-date screening was 72.0% overall and negatively associated with Hispanic ethnicity (63.6%), lower educational and annual income levels (e.g.,

Ion detection in a DNA nanopore FET device.

An ion detection device that combines a DNA-origami nanopore and a field-effect transistor (FET) was designed and modeled to determine sensitivity of the nanodevice to the local cellular environment. Such devices could be integrated into a live cell, creating an abiotic-biotic interface integrated with semiconductor electronics. A continuum model is used to describe the behavior of ions in an electrolyte solution. The drift-diffusion equations are employed to model the ion distribution, taking into account the electric fields and concentration gradients. This was matched to the results from electric double layer theory to verify applicability of the model to a bio-sensing environment. The FET device combined with the nanopore is shown to have high sensitivity to ion concentration and nanopore geometry, with the electrical double layer behavior governing the device characteristics. A logarithmic relationship was found between ion concentration and a single FET current, generating up to 200 nA of current difference with a small applied bias.

Portable T-2 toxin biosensor based on target-responsive DNA hydrogel using water column height as readout.

T-2 toxin, a hazardous mycotoxin often present in cereals and products based on cereals, poses a substantial risk to humans and animals due to its high toxicity. The development of uncomplicated, quick and highly sensitive methods for detecting T-2 toxin is imperative. In this work, a portable sensing system was constructed using water column height as a readout device in combination with a controlled release system, which allows for an accurate quantitative analysis of T-2 toxin without the need for expensive instrumentation or skilled technicians. Hyaluronic acid (HA) hydrogel was constructed by double cross-linked DNA/aptamer hybrids with polyethyleneimine (PEI) and embedded with platinum nanoparticles (Pt NPs). The aptamer specifically bound to T-2 toxin in its presence, resulting in the disruption of the hydrogel and subsequent release of the Pt NPs. These Pt NPs were later mixed with a solution of H2O2 in a confined reaction flask, leading to the decomposition of H2O2 into O2. A glass capillary tube containing a column of red water had been inserted into the cap of the reaction flask, and the low solubility of O2 led to an increase in pressure within the reaction unit, causing the red water column to rise. There is a good linear correlation between the height of the capillary liquid level and the T-2 toxin concentration in the range of 20 ng/mL to 6 µg/mL. The system has been successfully used to detect T-2 toxin in samples of barley tea and corn.

The importance of male underwear in cases of alleged sexual assault.

The potential evidential value of male underwear in cases of alleged sexual assault is often overlooked. Male underwear can be a critical item in the investigation of alleged sexual assaults. Body fluids/DNA, which may transfer to the penis during sexual contact, may in turn transfer to the inside front of the underwear, and persist for months or years, provided the underwear are not washed. Here, we demonstrate how the case circumstances drive the sampling strategy of male underwear, in order to maximize the effectiveness of the forensic analysis. Sampling considerations including recovery methods and sampling sequence are discussed, and a methodical examination strategy of male underwear is proposed. To highlight the pertinence of male underwear to the investigation of alleged sexual assaults, three real-life cases are discussed, in which male underwear were examined for multiple body fluids/DNA, and the findings obtained proved evidentially significant. The different cases demonstrate the versatility of male underwear examination in situations, where different body fluids and DNA may transfer based on the specific allegation, and emphasize how targeted sampling can allow the scientist to assess the probability of the findings based on two competing propositions. Accurate sampling strategies are imperative for robust probability assignment in evaluative reporting of scientific findings.

Functionalized DNA Origami-Enabled Detection of Biomarkers.

Biomarkers are crucial physiological and pathological indicators in the host. Over the years, numerous detection methods have been developed for biomarkers, given their significant potential in various biological and biomedical applications. Among these, the detection system based on functionalized DNA origami has emerged as a promising approach due to its precise control over sensing modules, enabling sensitive, specific, and programmable biomarker detection. We summarize the advancements in biomarker detection using functionalized DNA origami, focusing on strategies for DNA origami functionalization, mechanisms of biomarker recognition, and applications in disease diagnosis and monitoring. These applications are organized into sections based on the type of biomarkers - nucleic acids, proteins, small molecules, and ions - and concludes with a discussion on the advantages and challenges associated with using functionalized DNA origami systems for biomarker detection.

Evaluating User Experience and DNA Yield from Self-Collection Devices.

BACKGROUND: The COVID-19 pandemic emphasized an urgent need for devices used in the self-collection of biospecimens in an evolving patient care system. The mailing of biospecimen self-collection kits to patients, with samples returned via mail, provides a more convenient testing regimen, but could also impart patient sampling variabilities. User compliance with device directions is central to downstream testing of collected biospecimens and clear instructions are central to this goal. METHODS: Here, we performed an evaluation of 10 oral DNA collection devices involving either swab or saliva self-collection and analyzed ease of use and comfort level with a device, as well as DNA recovery quantity/quality and sample stability. RESULTS: We show that while these DNA quality/quantity metrics are comparable between devices, users prefer direct saliva collection over swab-based devices. CONCLUSIONS: This information is useful in guiding future experiments including their use in human RNA, microbial, or viral sample collection/recovery and their use in clinical testing.