Comparative analysis of hydrophobicity and dentin adhesion ability in Candida albicans strains.

OBJECTIVE: Adhesion to dentin is a first step for a successful microbial root canal colonization. Cell hydrophobicity seems to have some influence in the Candida species adhesion to surfaces. To measure cell surface hydrophobicity and to investigate the adherence ability to human dentin among Candida albicans strains isolated from root canal and lingual dorsum via an in vitro study. METHODOLOGY: adhesion was quantified in function of dentin area covered by blastospores and/or hyphae presence detected by epifluorescence microscope. Cell surface hydrophobicity was estimated by assessing the percentage migration of cells from an aqueous phase to a hydrocarbon phase. Contact angles were measured by the sessile drop technique on the dentin surface using a contact angle measurements apparatus. We also examined the correlation between adhesion ability and hydrophobicity. RESULTS: although there was some intra-species variation in cell surface hydrophobicity, most isolates were characterized by moderate hydrophobicity. There was no significant difference in this parameter when the isolation niche was considered. Both root canal and lingual dorsum yeasts were able to adhere to dentin. No association was found between the strains' site of isolation and adhesion. Moreover, cell surface hydrophobicity and adhesion ability were not correlated. CONCLUSION: although hydrophobicity can influence Candida albicans virulence in many ways, this study suggests that this parameter by itself was not a good predictor of adhesion to dentin.

Establishing legal threshold of 18-years based on the assessment of mandibular molars using three different methods - An observational study.

BACKGROUND: The study evaluates the feasibility of employing the radiographic visibility of the root pulp and periodontal ligament in mandibular molars for age estimation, particularly focusing on the 18 years of age threshold. This study additionally investigates the potential of root canal width reduction in mandibular molars, as a reliable method for forensic age estimation in living individuals. MATERIALS AND METHODS: A cross-sectional study was conducted to assess the radiographic visibility of the root pulp (RPV) and the root canal width (RCW) of mandibular first, second, and third molars along with the radiographic visibility of the periodontal ligament (PLV) of mandibular third molars, in a sample of 403 individuals aged 16-25 years (220 males and 183 females). Data regarding age for different stages of RPV and PLV and various types of RCW were recorded and observed for sex-based differences. Results obtained were tabulated and descriptive statistics were applied to summarise the findings. RESULTS: Individuals over 18 years old were classified with higher accuracy using stage 3 of the RPV scoring system in all mandibular molars (first, second, and third) compared to stage 2, which was also effective for the second and third molars. This result held regardless of sex and side examined. Additionally, root canal width (RCW) assessment demonstrated that individuals with RCW types A, B, and C were more likely to be under 18 years old in both sexes. Conversely, individuals with RCW type U on the right side for males and the left side for females exhibited a higher likelihood of being above 18 years old. CONCLUSION: The study suggests that the assessment of mandibular molars could potentially serve as an auxiliary tool in age estimation methods, particularly for approximating individuals around the 18 years of age threshold. Further investigation is warranted to explore the potential application of root canal width measurements in forensic age estimation.

[Study of the effect of different methods on the removal of calcium hydroxide in root canal by micro-computed tomography in vivo].

PURPOSE: To establish molar root canal model with micro-computed tomography (Micro-CT) and evaluate the removal efficiency of calcium hydroxide by different methods. METHODS: Eight molar teeth (24 root canals) extracted from the Department of General Dentistry, Shanghai Ninth People's Hospital from October 2023 to February 2024 were collected. Root canal preparation was instrumented by M3 according to standard root canal treatment procedures, then calcium hydroxide was injected into the root canal. One week later, the samples were randomly divided into 3 groups according to different irrigation methods(n=8): lateral opening syringe group, ultrasonic group and sonic vibration group. Micro-CT was used to reconstruct the root canal system before and after irrigation, and independent root canals were marked with different colors. The root canals were divided into upper root segment, middle root segment and apex segment. The volume of calcium hydroxide in each canal was calculated, and the clearance rate of calcium hydroxide was compared among the groups. SPSS 19.0 software package was used for statistical analysis. RESULTS: None of the three methods could completely remove calcium hydroxide from the root canal. When sodium hypochlorite was used as the flushing solution, the removal effect of ultrasonic group and sonic vibration group was significantly better than that of lateral opening syringe group(P＜0.05). The removal efficiency of calcium hydroxide by ultrasonic group and sonic vibration group was similar, and the difference was not statistically significant(P＞0.05). The removal rate of calcium hydroxide in apical segment was low. CONCLUSIONS: Micro-CT can reconstruct the molar root canal model efficiently for evaluating the removal effect of calcium hydroxide. The removal efficiency of calcium hydroxide in ultrasonic group and sonic vibration group is similar, and both are better than that in lateral syringe group.

[Study on fatigue resistance of mechanical nickel-titanium files by phase-locked infrared flaw detection method].

PURPOSE: The fatigue resistance of mechanical nickel-titanium files was tested by phase-locked infrared flaw detection method, in order to timely detect instrument wear, providing reference for clinical safe use and timely abandonment of nickel-titanium files. METHODS: Twenty sets of mechanical nickel-titanium files were selected from Reciproc-Blue(RB), MTWO and S3 respectively, and resin simulated root canals with 60° and 90° bending were prepared, which were divided into 6 subgroups. The fatigue value after use, the number of uses before breaking and the length of fracture of file 25# of each group of files were recorded and compared with SPSS 26.0 software package. RESULTS: With the increase of the times of use, the fatigue value of the three kinds of files increased gradually. Among the two types of curved root canals, the number of uses before fracture in RB group was significantly increased compared with that in MTWO group and S3 group (P＜0.05). The number of uses of the three kinds of files in the 90° curved root canal were significantly less than in the corresponding groups in the 60° curved root canal(P＜0.05). There was no significant difference in the length of fracture among the three kinds of files(P＞0.05). CONCLUSIONS: Phase-locked infrared flaw detection method can be used for non-destructive testing and quantitative analysis of the fatigue degree of nickel-titanium files.

[Impact of GuttaFlow Bioseal sealer on the vertical fracture resistance of oval-shaped canals].

PURPOSE: To investigate the effect of GuttaFlow Bioseal root canal sealer on the vertical root fracture resistance of oval-shaped root canals. METHODS: Sixty orthodontically subtracted maxillary and mandibular single-rooted premolar teeth were scanned with CBCT. Oval canals were eligible when the buccolingual diameter of the canal was greater than or equal to two times the mesiodistal diameter at a distance of 5 mm from the root apex. Thirty single-rooted premolars with oval-shaped root canals were prepared to F2 using the Protaper system and then randomly divided into the GuttaFlow Bioseal filling group and iRoot SP filling group. Each group was further divided for root canal filling using warm vertical compression, cold lateral condensation and single cone techniques. Five single-rooted premolars was chosen as a negative control group. After 30 days of storage in a constant thermotank at 37 ℃ and 100% humidity, the filled roots were vertically placed into a cylindrical model of self-polymerizing acrylic resin. Subsequently, the samples were fixed on the lower plate of a universal testing machine, and a ball of 4 mm in diameter was applied vertically with a downward pressure at a speed of 1 mm/min until fracture occurred. The load values were recorded in Newtons. The data were analyzed using SPSS 29.0 software package. Fracture patterns were examined under microscope. RESULTS: T test results showed no significant difference between the GuttaFlow Bioseal-filled and iRoot SP-filled groups (P=0.321). One-way ANOVA showed a significant difference in vertical fracture resistance between the groups(P＜0.05), and LSD analysis showed that the GuttaFlow Bioseal-filled sample teeth were significantly more resistant to vertical fracture than the iRoot SP when using the thermal vertical compression filling method and the single-tip method(P＜0.05). In contrast, the GuttaFlow BIoseal-filled group was significantly less resistant to vertical fracture than the iRoot SP group when using the cold lateral compression filling method(P＜0.05). CONCLUISIONS: GuttaFlow Bioseal has the potential to improve root resistance to vertical fracture when filling root canals using the thermal vertical pressurization method and the single-tip method, but more clinical trials are needed to validate this result and its long-term prognosis.

Influence of Cavity Designs on Fracture Resistance: Analysis of the Role of Different Access Techniques to the Endodontic Cavity in the Onset of Fractures: Narrative Review.

Objectives: In recent years, new endodontic access techniques have been proposed with the aim of preserving as much dental tissue as possible for subsequent prosthetic rehabilitation. It has indeed been demonstrated that the success of this therapy is essential and dependent on the proper execution of endodontic cavity access. The main objective is to provide a comprehensive and up-to-date overview of the new access techniques in endodontics in order to guide clinical practice toward a more precise and qualitative approach. As of today, there is still no universally standardized and recognized taxonomy for the different access cavity designs described in the literature. It has been observed that there are various nomenclatures in the literature. The cavity access designs described mainly in the literature can be categorized into six groups: Traditional Access Cavity (TradAC), Conservative Access Cavity (ConsAC), Ultra-Conservative Access Cavity (UltraAC), Truss Access Cavity (TrussAC), Caries-Guided Access Cavity (CariesAC), and Restoration-Guided Access Cavity (RestoAC). Materials and Methods: The drafting of this narrative review followed the indications of the SANRA (Scale for the Assessment of Narrative Review Articles). A search for scientific articles was conducted on the PubMed and SCOPUS databases, using the following search query: ((truss) OR (conservative) OR (ninja) OR (traditional)) AND access AND endodontic. Results: The initial search yielded a total of 941 articles. After removing duplicates using EndNote X8 software, the number of articles decreased to 785. By applying the inclusion and exclusion criteria, a total of 64 articles were obtained. Among these, 20 articles were finally selected for the purposes of this review, 11 literature reviews and 9 ex-vivo studies. Conclusion: Studies on fracture resistance have yielded heterogeneous results. For anterior teeth, studies do not find a significant relationship between different endodontic access cavities and fracture resistance. However, in the posterior sector, there is more discrepancy and many positive results for minimally invasive access cavities seem to relate to molars. Therefore, it can be concluded that the evidence supporting the influence of endodontic preparations on dental fracture resistance is still limited. Research on new endodontic access techniques holds significant clinical relevance in contemporary endodontics. The evolution of dental technologies, including cone beam computed tomography (CBCT) and computer-guided cavity preparation, has ushered in the era of minimally invasive endodontics. This shift aims to enhance the precision and quality of endodontic treatments while preserving maximum healthy dental tissue for subsequent prosthetic rehabilitation. The success of endodontic therapy is closely tied to the proper execution of access to the endodontium, influencing all phases of endodontic treatment and playing a role in determining fracture resistance for subsequent rehabilitation phases. The dichotomy between traditional and minimally invasive approaches has spurred clinical investigations. Specifically, within the scientific community, doubts have been raised about the potential limitations of minimally invasive access cavities. Concerns include their impact on canal orifice localization and raise questions about their influence on the overall success of endodontic treatment. This review holds clinical significance as it sheds light on the evolving landscape of endodontic access techniques, analyzing the anatomical trajectory, carefully examines the transition to minimally invasive approaches, and critically assesses existing scientific evidence and concerns surrounding these developments, contributing to an informed decision-making process in clinical practice.

Prevalence of Isthmi and Root Canal Configurations in Mandibular Permanent Teeth Using Cone-Beam Computed Tomography.

While root canal anatomy in Middle Eastern populations is well-studied, research on isthmi in mandibular permanent teeth from this region is limited. This retrospective study used cone-beam computed tomography (CBCT) to examine isthmi prevalence and location, as well as root canal morphologies (per Vertucci's classification) in mandibular permanent teeth from a subpopulation in Ardabil, Iran. The study is aimed at enhancing our understanding of dental anatomical variations in Middle Eastern populations. A total of 3566 teeth from 384 CBCT scans were evaluated in this retrospective study. Mandibular teeth were evaluated on sagittal, coronal, and axial sections regarding the presence of isthmus and root morphology (Vertucci's classification). CBCT scans of 197 males (51.3%) and 187 females (48.7%) were evaluated, with a mean age of 41.1 ± 11.4 years. Isthmi were most prevalent in molar mesial roots, typically located in the middle third for anterior teeth and first premolars and cervical third for posterior teeth. While gender did not play a significant role, the presence of an isthmus in the mesial root of the left second molars was associated with a younger mean patient age (p < 0.05). Root morphology varied across tooth types. Central and lateral incisors predominantly showed Vertucci's Types I and III. Canines and premolars were mostly Type I, with some variation. Molar mesial roots frequently exhibited Types IV and II, while distal roots were predominantly Type I. Statistically significant differences were found between morphology and gender in the first left premolar (Type I more common in women; Type V in men; p < 0.001) and in the right canine (Type I more prevalent in men; Types III and V more prevalent in women; p < 0.001). The results revealed wide variations in root canal morphology and a relatively high prevalence of isthmi in the study population. Our findings suggest a potential difference in tooth anatomy based on sex and a relationship between age and the presence of isthmi.

Strategies and mechanisms targeting Enterococcus faecalis biofilms associated with endodontic infections: a comprehensive review.

Enterococcus faecalis is one of the main microorganisms that infects root canals, ranking among the most prevalent microorganisms associated with endodontic treatment failure. Given its pervasive presence in persistent endodontic infections, the successful elimination of Enterococcus faecalis is crucial for effective endodontic treatment and retreatment. Furthermore, Enterococcus faecalis can form biofilms - defense structures that microbes use to fight environmental threats. These biofilms confer resistance against host immune system attacks and antibiotic interventions. Consequently, the presence of biofilms poses a significant challenge in the complete eradication of Enterococcus faecalis and its associated disease. In response, numerous scholars have discovered promising outcomes in addressing Enterococcus faecalis biofilms within root canals and undertaken endeavors to explore more efficacious approaches in combating these biofilms. This study provides a comprehensive review of strategies and mechanisms for the removal of Enterococcus faecalis biofilms.

α-IRAK-4 Suppresses the Activation of RANK/RANKL Pathway on Macrophages Exposed to Endodontic Microorganisms.

Periapical lesions are common pathologies affecting the alveolar bone, often initiated by intraradicular lesions resulting from microbial exposure to dental pulp. These microorganisms trigger inflammatory and immune responses. When endodontic treatment fails to eliminate the infection, periapical lesions persist, leading to bone loss. The RANK/RANKL/OPG pathway plays a crucial role in both the formation and the destruction of the bone. In this study, the objective was to inhibit the RANK/RANKL pathway in vitro within exposed Thp-1 macrophages to endodontic microorganisms, specifically Enterococcus faecalis, which was isolated from root canals of 20 patients with endodontic secondary/persistent infection, symptomatic and asymptomatic, and utilizing an α-IRAK-4 inhibitor, we introduced endodontic microorganisms and/or lipoteichoic acid from Streptococcus spp. to cellular cultures in a culture plate, containing thp-1 cells and/or PBMC from patients with apical periodontitis. Subsequently, we assessed the percentages of RANK+, RANKL+, and OPG+ cells through flow cytometry and measured the levels of several inflammatory cytokines (IL-1ß, TNF-α, IL-6, IL-8, IL-10, and IL-12p70) in the cellular culture supernatant through a CBA kit and performed analysis by flow cytometry. A significant difference was observed in the percentages of RANK+RANKL+, OPG+ RANKL+ cells in thp-1 cells and PBMCs from patients with apical periodontitis. The findings revealed significant differences in the percentages of the evaluated cells, highlighting the novel role of the IRAK-4 inhibitor in addressing this oral pathology, apical periodontitis, where bone destruction is observed.

Accuracy of Working Length Measurement Using Cone Beam Computed Tomography at Three Field of View Settings, Conventional Radiography, and Electronic Apex Locator: An Ex-vivo Study.

OBJECTIVES: Determining the working length (WL) in root canal treatment facilitates the treatment prognosis. The introduction of apex locators and new CBCT devices in dentistry influenced this consideration. This comparative study evaluated the accuracy of working length measurement by cone-beam computed tomography (CBCT) in three fields of view (FOVs), conventional radiography, and the apex locator Raypex 5. METHODOLOGY: The descriptive-analytical study was performed on 40 lower premolar teeth that met the inclusion criteria. Direct observation under the microscope was considered the gold standard and compared with measurements by the electronic apex locator, CBCT, and periapical images. RESULTS: The results were analyzed by paired t-tests and Wilcoxon tests. A significance level of 0.05 was considered in this study. CBCT 5×5 FOV with a p-value of 0.733 and analog radiography with a p-value of 0.001 achieved the working lengths with the highest and lowest accuracy, respectively. In addition, the difference between actual and measured working length using analog radiography was significant (p-value <0.05). CONCLUSIONS: According to the results of this study, CBCT images at different FOVs and those taken by the apex locator Raypex 5 can be used as a reliable method for estimating the working length. (EEJ-2023-10-141).

Negotiating and Treating Lateral Canals: Report of 7 Cases.

This is a series of 7 cases in which the operator penetrated lateral canals with instruments. Two teeth presented with irreversible pulpitis, 4 with necrotic pulps, and 1 with previous treatment. Except for the teeth with pulpitis, all the others were associated with apical periodontitis. The main root canal was always relatively straight, with the lateral canals at the middle third of the root. Suggestive images of lateral canal presence were seen on periapical radiographs in five cases. The clinician introduced intentionally small hand instruments in the lateral canal in 5 cases, while the penetration was fortuitous in the others. The lateral canals were obturated in all cases. Follow-up examination was possible in five cases, all of them showed evidence of successful clinical and radiographic outcomes. Introducing files into lateral canals may permit some preparation and penetration of irrigant solution, favoring disinfection and, consequently, enhancing the treatment outcome. (EEJ-2023-05-063).

Position and frequency of lateral canals in carnassial teeth of dogs.

Carnassial teeth, as one of the most important teeth in dogs, are commonly affected by different types of injuries and pathological disorders, which require endodontic treatment. Lateral canals, which leave the main root canal, and apical deltas are present in the root canal system of dogs. These canals represent small branches that leave the main root canal at a sharp angle and terminate in a region of the periodontal ligament on the external root surface. In this study, 200 teeth were included, of which 100 were superior fourth premolars and 100 were inferior first molars. Lateral canals were present in a total of 30 roots of superior fourth premolar teeth, whereas in inferior first molars, these canals were found in 3% of roots. In superior fourth premolars, lateral canals were mostly present in the apical third, 86%, while 14% were present in the middle third of the root. In inferior first molars, lateral canals were found in 3% of the roots, 2% in the apical third and 1% in the middle third of the roots. The knowledge of the complex root canal morphology is essential for any endodontic treatment. Due to the presence and frequency of lateral canals, it is imperative to perform more thorough cleaning and instrumentation while performing endodontic treatment on superior fourth premolars compared to inferior first molars.

Morphology and root canal configuration of maxillary canines: a systematic review and meta-analysis.

BACKGROUND: This study assessed the internal morphology of maxillary canines (MxC) through a systematic review of existing literature. METHODS: Research articles up to June 2024 were retrieved from five electronic databases (MEDLINE via PubMed, Embase, Scopus, LILACS, and Cochrane). Predefined search terms and keywords were used, and potential studies were identified by cross-referencing and bibliographies of the selected articles reviewed. RESULTS: Two hundred studies were identified, 73 duplicates were removed, 127 records were screened, and 113 were removed after consultation of title and abstract. After full-text consultation and hand searching, finally 22 studies were included. Using the method for describing the root canal configuration (RCC) of Briseño Marroquín et al. (2015) and Vertucci (Ve) (1984), the most frequently reported RCC of MxC were 1-1-1/1 (Ve I, 75.4-100%), 2-2-1/1 (Ve II, 0.1-20%), 1-2-1/1 (Ve III, 0.1-11.6%), 2-2-2/2 (Ve IV, 0.1-0.4%), 1-1-2/2 (Ve V, 0.1-2.4%), 2-1-2/2 (Ve VI, 0.5-1.2%), and 1-2-1/2 (Ve VII, 0.1-0.2%). The meta-analysis of six studies (Europe/Asia) showed that a significantly higher number of RCC of 2-2-1/1 (Ve II) (OR [95%CI] = 1.34 [0.53, 3.41]), 1-2-1/1 (Ve III) (OR [95%CI] = 2.07 [1.01, 4.26]), and 1-1-2/2 (Ve V) (OR [95%CI] = 2.93 [1.07, 8.07]), were observed in males, and 2-2-2/2 (Ve IV) (OR [95%CI] = 0.08 [0.00, 4.00]) in females. No sex differences in the RCC of 1-1-1/1 (Ve I) and 1-2-1/2 (Ve VII) were observed. CONCLUSIONS: Cone beam computed tomography is the most frequently used method for research on the RCC of MxC. Despite the high prevalence of type 1-1-1/1 (Ve I) RCC in MxC, clinicians should remain vigilant for more complex and sex-differentiated patterns in up to 25% of cases to prevent endodontic treatment complications or failures.

Comprehensive Analysis of Mandibular First Molar Root and Canal Morphology in Saudi Patients Using Cone Beam Computed Tomography (CBCT).

BACKGROUND The goal of conventional endodontic therapy is to clean the root canal system thoroughly, restore tooth function, and prevent re-infection. Success depends on understanding root canal morphology, resolving apical periodontitis, and using proper techniques. Studies highlight variations in root canal anatomy, with cone-beam computed tomography (CBCT) being crucial for accurate diagnosis despite its high cost and limited availability. MATERIAL AND METHODS This retrospective study reviewed CBCT images of 1820 (907 male, 913 female) patients aged 18 to 78 years. Analysis included 2081 mandibular first molars for variations in root and canal morphology and right- and left-side symmetry. Inter-orifice distance was measured, along with distance from the cementoenamel junction (CEJ) to the level of canal bifurcation. RESULTS In this study, 96.01% of teeth had 2 roots and 3.89% had 3 roots. The percentages of canal configuration were 77.70% for 3 canals, 21.58% for 4 canals, 0.67% for 2 canals, and 0.05% for 1 canal. The inter-orifice distance was 2.07 mm for 2 canals in 1 root and 2.86 mm for 2 canals in separate distal roots. Distance from the CEJ to canal bifurcation varied significantly between 2 canals within 1 distal root (3.35 mm), 2 canals in separate distal roots (1.60 mm), as well as between distal (3.35 mm) and mesial roots (1.10 mm). CONCLUSIONS In mandibular first molars, only 3.89% have additional distolingual roots. Sex and ethnicity showed no influence on number of roots and canals. Distal canals showed a deeper bifurcation and greater inter-orifice distance than did mesial canals.

Comparative evaluation of the accuracy of electronic apex locators and cone-beam computed tomography in detection of root canal perforation and working length during endodontic retreatment.

BACKGROUND: To evaluate the accuracy of the electronic apex locators (EALs), and Cone-Beam Computed Tomography (CBCT) scanning, both in working length (WL) determination and in the detection of root canal perforations in retreatment cases. METHODS: Sixty human mandibular premolars were selected. After crown removal partially and canal access, root canals were instrumented and irrigated. The obturation process utilized gutta-percha and sealer with warm vertical compaction. Two groups were distinguished: one without perforation (Group 1) and the other with an apical third perforation (Group 2). Retreatment included filling removal, apical preparation, and irrigation. Actual working lengths (AWL) were determined using a stereomicroscope. CBCT images were used to measure CBCT working length (CWL), with adjustments for optimal views. Propex II and Dentaport ZX were used to measure electronic working length (EWL). Differences between EWL and AWL, as well as CWL, were analyzed to gauge accuracy. Data underwent Two-way ANOVA analysis. Measurements within ± 0.5 and ± 1 mm tolerance ranges were deemed successful for each device, followed by applying the Pearson Chi-square test. RESULTS: The study reveals no significant inter-group variations in device performance (p > .05). Dentaport ZX missed detecting perforation in two Group 2 (apical perforation) cases. For ± 1 mm tolerance, Propex II displayed the highest success in Group 2 (apical perforation). CONCLUSION: This study demonstrates the comparable performance of Propex II, Dentaport ZX, and CBCT in endodontic retreatment, providing insights into diagnostic reliability.

Efficacy of various techniques in calcium silicate-based intracanal medicament removal: a micro-CT analysis.

The purpose of this study was to evaluate the efficacy of different techniques in removing calcium silicate intracanal medicament (Bio-C Temp). Forty human single-canaled premolars were randomly distributed into five groups (n = 8). All root canals were instrumented, then filled with Bio-C Temp. Following 1-week incubation, the intra-canal medicament was removed using one of five techniques according to tooth group: conventional syringe irrigation, Endo Activator, passive ultrasonic irrigation (PUI), ProTaper Universal F3 and XP-endo Finisher (XPF). Micro-CT scanning was performed before and after removal of Bio-C Temp. All techniques significantly reduced the volume of Bio-C Temp (p < 0.001) without reaching complete elimination. The percentage of Bio-C Temp removed was significantly higher in the XPF group (98.2%) compared to conventional syringe irrigation (70.6%), the Endo Activator (75.7%), and the ProTaper Universal (76.6%). There was no significant difference between the XPF and PUI (95.1%) groups. None of the removal techniques were able to completely remove Bio-C Temp from the root canal. However, XPF was the most effective method, but was not statistically significant when compared to PUI. Clinical Relevance: This study demonstrated that both XPF and PUI outperform conventional irrigation in removing Bio-C Temp intracanal medicament.

Prevalence of Middle Mesial Canal in Mandibular First Permanent Molars in a Persian Population: An In Vivo Cone-Beam Computed Tomography Study.

OBJECTIVES: This study aimed to identify the prevalence of the middle mesial canal (MMC) in mandibular first permanent molars in a Persian subpopulation sample using cone-beam computed tomography (CBCT). The secondary aim was to correlate the incidence of MMC with variables such as gender, age, and the presence of an additional distal canal. MATERIALS AND METHOD: A total of 390 mandibular first molars from 314 CBCT images were retrospectively evaluated. The presence of the MMC was recorded while considering related factors such as additional distal canal and demographic information of the patients (age and gender). Fisher's exact tests and independent-samples t-test were used for the statistical comparisons with a significance level of 0.05. RESULTS: Among 390 mandibular first molars, 34 teeth contained an MMC (8.7%). The number of teeth with the MMC in women was equal to that of men. There was no significant difference between the two genders in the prevalence of the MMC (p > 0.05). The prevalence of patients' MMC had no significant relationship with their age (p > 0.05). However, there was a significant association between the presence of the MMC and an additional distal canal (p < 0.05). CONCLUSION: The incidence of an additional distal canal in teeth with a diagnosed MMC was statistically significant. The prevalence of the MMC in mandibular first molars in the study population was low; however, accurate knowledge of root canal morphology in terms of the presence of an additional root canal in these teeth should be considered.

Evaluation of the forces applied by rubber dam clamps on mandibular first molar teeth with different endodontic access cavities: a 3D FEA study.

Background: This study aimed to examine the effect of the force applied by rubber dam clamps made from different materials on mandibular first molar teeth with various designs of endodontic access cavities using finite element analysis. Methods: A intact tooth (IT) and seven different endodontic access cavities namely, a traditional endodontic cavity (TRADAC), a guided endodontic cavity (GEC), a conservative endodontic cavity (CAC), an ultra-conservative access cavity (UAC), a truss access endodontic cavity (TRSAC), a mesial caries access cavity (MCAC), and a distal caries access cavity (DCAC), along with two different clamp finite element models, were created. The clamp models were made of polyether ether ketone (PEEK) and stainless steel (SS). The forces applied by the clamps were calculated based on the axial section distance of the tooth, and these forces were applied to the contact areas on the tooth. Stress distribution models were calculated using maximum von Mises (vM) stress. Results: The lowest vM stress under the forces applied by the SS and PEEK clamps was found in the IT model (80.914 MPa) with the PEEK clamp. The highest vM stress was found in the DCAC model (759.49 MPa) applied with the SS clamp. The forces applied by SS clamps resulted in higher vM stress values in every cavity design than those applied by PEEK clamps. Conclusion: PEEK clamps generated less force than SS clamps. However, clinicians should follow various isolation strategies (clamp made of different materials, split dam, etc.) according to different cavity types of the tooth.

Mineral trioxide aggregate obturation quality with two obturation techniques in severe curved root canals - a micro-CT study.

BACKGROUND: The existence of voids within the mineral trioxide aggregate (MTA) composition is one of the factors that can influence the treatment outcome. The primary objective of this study was to quantitatively assess and compare the MTA orthograde obturation quality in severe curved root canals using two different MTA compaction techniques: manual compaction with K-file, or Auger technique using micro-computed tomography (micro-CT) imaging. METHODS: For this study, 26 mandibular first molar teeth with severely curved mesiobuccal root canals were selected. These samples were randomly divided into two groups. All root canals were instrumented using ProTaper Gold rotary files up to the F3 file at the working length. In one group, OrthoMTA was compacted using a stainless steel K-file, while in the other group, the Auger technique was employed for compaction into the root canals. Once the MTA had completely set, the filled root canals were subjected to scanning using a high-resolution micro-CT scanner. The porosity volume was determined as a percentage in relation to the overal volume of the canal, and the collected data were subjected to analysis using SPSS software, with the significance level set at P < 0.05. RESULTS: The two techniques had no significant difference in open, closed, and total mean porosity. In both groups, the mean of open porosity was significantly more than closed porosity. CONCLUSIONS: According to the results of the present study, neither of these two techniques is preferred to the other, and factors such as working time, etc., can be considered to choose the more appropriate clinical technique.

Debridement ability of the WaveOne Gold and TruNatomy systems in the apical third of root canals: ex vivo assessment.

Cleaning and shaping the root canal system are essential steps for performing successful endodontic therapy, and are challenging procedures in the apical region. This study aimed to conduct an ex vivo assessment of the debridement ability of the WaveOne Gold (Medium 35/.06) and TruNatomy (Medium 36/.03) systems in the apical third of round root canals of mandibular premolars. Forty-eight teeth, extracted for orthodontic or periodontal reasons, were divided into three groups (n=16), as follows: Group C, control (without instrumentation or irrigation); Group WOG, instrumentation with WaveOne Gold; Group TN, instrumentation with TruNatomy. A total of 40 mL of 2.5% sodium hypochlorite and 5 mL of 17% ethylenediamine tetraacetic acid were used per root canal in all the groups. Ten 0.5-µm serial cross-sections per specimen were obtained every 0.2 mm from a 2-mm segment of the apical region, extending from 1 to 3 mm short of the root apex. The sections were stained with hematoxylin-eosin and analyzed under a digital microscope (100x). The percentages of unprepared walls and remaining debris were quantified using ImageJ software. Generalized linear models were used to analyze the results (α=5%). Groups WOG and TN had significantly lower percentages of unprepared walls and remaining debris than Group C (p<0.05). There was no significant difference between groups WOG and TN for either of the variables studied (p>0.05). Instrumentation with the WaveOne Gold Medium and TruNatomy Medium instruments was associated with equivalent percentages of unprepared walls and remaining debris in the apical third of round canals of mandibular premolars.