Long-term hybrid stability and matrix metalloproteinase inhibition by fucosterol in resin-dentin bonding biomechanics.

Fucosterols have been widely studied for their antioxidant, anticancer, and anti-inflammatory properties. However, they have not yet been studied in the field of dentistry. This study aimed to determine whether pretreatment of dentin with fucosterol before resin restoration enhances bond stability in resin-dentin hybrid layers. After applying 0.1, 0.5, and 1.0 wt% fucosterol to demineralized dentin, microtensile bond strength (MTBS) and nanoleakage tests were performed before and after collagenase aging, and the surface was observed using scanning electron microscope (SEM). The fucosterol-treated group showed better bond strength and less nanoleakage both before and after collagenase aging, and the corresponding structures were confirmed using SEM. MMP zymography confirmed that the activity of MMPs was relatively low along the concentration gradient of fucosterol, and the FTIR analysis confirmed the production of collagen crosslinks. In addition, fucosterol exhibits cytotoxicity against Streptococcus mutans, the main cause of dental decay. The results of this study suggest that fucosterol pretreatment improves bond strength and reduces nanoleakage at the resin-dentin interface, possibly through a mechanism involving collagen cross-link formation via the inhibition of endogenous and exogenous MMP activity. This study demonstrates the potential of fucosterol as an MMP inhibitor in dentin, which contributes to long-term resin-dentin bond stability and can be used as a restorative material.

[The effect of erbium laser pretreatment on bond strength between dentin and enamel and microleakage at the edge of CAD/CAM glass ionomer cement restorations for repairing tooth defects].

PURPOSE: To investigate the effects of erbium laser pretreatment on the bond strength of dentin and enamel,as well as microleakage at the edge of tooth defects repaired with computer-aided design (CAD) and computer-assisted manufacturing (CAM) glass-ceramic restorations for repairing dental defects. METHODS: A total of 62 fresh, nondecayed, nondiscoloration and noncracked wisdom teeth were collected from the Oral Surgery Clinic between January 2020 and January 2023. According to different pretreatment methods, they were randomly divided into two groups, erbium laser group and phosphoric acid group, with 31 teeth in each group. Each group was further divided into two subsets for bond strength testing (16 teeth) and microleakage testing (15 teeth).The shear bond strength between enamel and dentin of both groups was compared, as well as the degree and distribution of microleakage.Statistical analysis was performed with SPSS 17.0 software package. RESULTS: The shear bond strength between enamel and dentin of the erbium laser group was significantly higher than that of the phosphoric acid group (P＜0.05); the degree and distribution of microleakage at the lateral walls and gumline of the erbium laser group were significantly lower than those of the phosphoric acid group (P＜0.05). The scores of microleakage at the lateral walls of the erbium laser group mainly concentrated in grade 1 and 2, whereas those of the phosphoric acid group mainly concentrated in grade 2. There was significant difference in the distribution of lateral wall microleakage scores between the two groups (P＜0.05). The scores of microleakage at the gumline of the erbium laser group mainly concentrated in grade 1 and 2, whereas those of the phosphoric acid group mainly concentrated in grade 2 and 3. There was significant difference in the distribution of gumline microleakage scores between the two groups (P＜0.05). CONCLUSIONS: Erbium laser pretreatment can improve bonding strength between glass ionomer cement and dentin and enamel, reduce microleakage at the edge of CAD/CAM glass ionomer cement restorations, and enhance marginal fit.

An in-vitro evaluation of residual dentin retained after using novel enzymatic-based chemomechanical caries removal agents.

To assess the biochemical, mechanical and structural characteristics of retained dentin after applying three novel bromelain-contained chemomechanical caries removal (CMCR) formulations in comparison to the conventional excavation methods (hand and rotary) and a commercial papain-contained gel (Brix 3000). Seventy-two extracted permanent molars with natural occlusal carious lesions (score > 4 following the International Caries Detection and Assessment System (ICDAS-II)) were randomly allocated into six groups (n = 12) according to the excavation methods: hand excavation, rotary excavation, Brix 3000, bromelain-contained gel (F1), bromelain-chloramine-T (F2), and bromelain-chlorhexidine gel (F3). The superficial and deeper layers of residual dentin were examined by Raman microspectroscopy and Vickers microhardness, while the surface morphology was assessed by the scanning electron microscope (SEM). A multivariate analysis of variance followed by Tukey's test (p > 0.05) was performed for data analysis. The novel formulations showed an ability to preserve the partially demineralized dentin that showed a reduced phosphate content with a higher organic matrix. This was associated with lower Vickers microhardness values in comparison to sound dentin and rotary excavation. The collagen integration ratio in all methods was close to sound dentin (0.9-1.0) at the deeper dentin layer. The bromelain-chloramine-T gel (F2) produced the smoothest smear-free dentin surface with a higher number of opened dentinal tubules. In contrast, dense smearing covering the remaining dentin was observed in the manual and rotary methods with obstructed dentin tubule orifices. The bromelain-contained formulations can be considered a new minimally invasive approach for selectively removing caries in deep cavitated dentin lesions.

VMT/ACP/Dextran composite nanosheets against dental caries through promoting mineralization of dentin tubules, pH buffering, and antibacterial.

Dental caries is a worldwide public healthcare concern, and is closely related to the acidic environment that caused by bacterial decomposition of food. In this study, a two-step ion exchange liquid-phase stripping method was applied to strip out vermiculite (VMT) nanosheets, then amorphous calcium phosphate (ACP) and dextran were inserted between the VMT nanosheets interlayer to obtain a composite two-dimension nanosheets (VMT/ACP/Dextran). VMT/ACP/Dextran composite nanosheets exhibited excellent biocompatibility and could provide exogenous Ca2+and PO43- from ACP, provide SiO44-, Mg2+, Fe2+ and obtain buffering pH and antibacterial properties from VMT, as well as improve suspension stability and targeting Streptococcus mutans through glucan. The in vitro study showed that the composite materials could promote the mineralization and sealing of dentin tubules by releasing active ions, buffer pH 4.5 (a value close to the pH in the dental plaque environment) to pH 6.6-7.1 (values close to the pH in human saliva) through ion exchange, and exert antibacterial effects by targeting Streptococcus mutans and exerting oxidase like and peroxidase like activities to produce reactive oxygen species (ROS). The in vivo animal study showed that daily cleaning teeth using VMT/ACP/Dextran composite nanosheets could effectively reduce the incidence rate and severity of dental caries in rats. Taking together, the developed VMT/ACP/Dextran composite nanosheets, which integrated the excellent properties of VMT, ACP and dextran, can effectively prevent dental caries through a combination of factors such as buffering acids, antibacterial properties, and promoting calcification, and may be used as an active ingredient for daily oral hygiene or filling materials to prevent and treat dental caries.

Influence of Different Application Modes of a Universal Adhesive System on the Bond Strength of Bulk-Fill Composite Resin to Enamel and Dentin in Primary Teeth.

OBJECTIVES: The objective of this study was to assess how the application mode of a universal adhesive system affects the microshear bond strength (µSBS) of bulk-fill and conventional composite resins to enamel and dentin in primary teeth. METHODS: A total of 80 caries-free primary second molars were randomly assigned to eight experimental groups (n = 10) based on the bonding substrate (enamel or dentin), the application mode of the universal adhesive system (etch and rinse [E&R], or self-etch [SE]), and the type of composite resin used (bulk-fill or conventional). After bonding the composite resin to enamel or dentin, the µSBS of the bonded composite resins was measured. RESULTS: The mean µSBS value of bulk-fill composite resin was significantly higher than that of conventional composite resin for both enamel and dentin substrates, regardless of the application mode (p < 0.001). An interaction effect between the bonding substrate and the application mode of the adhesive system was observed, indicating a significant relationship (p < 0.001). The highest µSBS values for primary teeth enamel were achieved using the E&R mode with bulk-fill composite resin, while for dentin specimens, the SE mode with bulk-fill composite resin yielded the highest µSBS values. The µSBS of the E&R group was significantly higher than that of the SE group for enamel specimens (p < 0.001), whereas the µSBS of the SE group was significantly higher than that of the E&R group for dentin specimens (p < 0.001). CONCLUSION: Bulk-fill composite resin demonstrated higher µSBS in comparison to conventional composite resin. The universal adhesive system exhibited superior performance in the SE mode compared to the E&R mode on primary dentin. Pre-etching the enamel before the application of the universal adhesive enhanced the µSBS to primary teeth enamel, highlighting the importance of selectively acid etching the enamel of primary teeth.

Stability of the Dentin-Bonded Interface Using Self-Etching Adhesive Containing Diacrylamide after Bacterial Challenge.

Purpose/Aim: Acrylamides are hydrolytically stable at pH lower than 2, and were shown to preserve bonded interface integrity with two-step, total etch adhesives. The objective of this study was to leverage those two characteristics in self-etching primers containing the acidic monomer 10-MDP and test the microtensile bond strength before and after incubation with S. mutans incubation. Materials and Methods: Acidic primers (10 wt % 10-methacryloyloxydecyl dihydrogen phosphate─10-MDP; 45 wt % N,N-diethyl-1,3-bis(acrylamido)propane─DEBAAP, or 2-hydroxyethyl methacrylate─HEMA; 45 wt %, glycerol-dimethacrylate─GDMA) and adhesives (DEBAAP or HEMA/10-MDP/UDMA 45/10/45 wt %) were made polymerizable by the addition of 0.2 wt % camphorquinone, 0.8 wt % ethyl-4-dimethylaminobenzoate, 0.4 wt % diphenyliodonium hexafluorophosphate, and 0.1 wt % butylhydroxytoluene. Nonsolvated materials were characterized for flexural strength (FS), modulus (E), toughness, water sorption/solubility (WS/SL), contact angle, and vinyl conversion (DC). Viscosity was evaluated after adding 20 and 40 vol % ethanol to the primer and adhesive, respectively. The experimental materials or Clearfil SE Bond (CC─commercial control) were used to bond a commercial composite (Filtek Supreme) to the flat surface of human dentin. Microtensile bond strength (MTBS) was tested in 1 mm2 sticks for the 5 primer/bond combinations: CC (Clearfil Bond Primer and Bond), HH (HEMA/HEMA), DD (DEBAAP/DEBAAP), HD (HEMA/DEBAAP), and DH (DEBAAP/HEMA). Prior to testing, sticks were stored in water or biofilm-inducing culture medium with S. mutans for 1 week. Confocal images and FTIR-ATR evaluation evaluated the hybrid layer of the adhesives. Results were analyzed using Student's t-test (WS, SL, DC, contact angle, FS, E, toughness), one-way ANOVA/Tukey's test for viscosity, and two-way ANOVA/Tukey's test for MTBS (95%). Results: HEMA-based materials had lower contact angle (p = 0.004), higher WS (p < 0.001), and similar SL values compared to DEBAAP (p = 0.126). FS (p = 0.171) and E (p = 0.065) dry values were similar, but after one week of water storage, FS/E dropped more significantly for HEMA materials. Dry and wet toughness was greater for DEBAAP (p < 0.001), but it also had the greatest drop (46%). Clearfil bonds had the highest viscosity, followed by DEBAAP and HEMA, respectively (p = 0.002). For the primers, HEMA had the lowest viscosity (p = 0.003). As far as MTBS, all groups tested in water were statistically different when compared with HH (p < 0.001). After storage in biofilm, DH had the highest MTBS value, being statistically different from HH (p = 0.002), CC (p = 0.015), and DD (p = 0.027). Conclusions: The addition of a diacrylamide and its association with HEMA in self-etching adhesive systems provided greater bonding stability after bacterial challenge.

A pilot study on post-mortem determination of drug abuse on dental tissues.

BACKGROUND: Post-mortem toxicology constantly deals with the research of reliable alternative matrices to be applied in case of highly damaged corpses (such us carbonized, skeletonized, human remains, etc.). Teeth represent a promising alternative matrix since dental tissues are endowed by different features, resistance and stability after death. SCOPE: Since scant literature reported on the pharmacokinetics and mechanism of incorporation of xenobiotics into dental tissues, this pilot research aims to investigate whether in the pulp can be detected the same substances found in blood in drug related death cases. Secondly, the study is addressed to disclose the possible deposit of drugs in dental hard tissues (dentine and/or enamel), thus contributing to reconstruct the drug abuse history (timing, e.g.). MATERIALS AND METHODS: The study experimented with a novel method to separately analyse dental enamel, dentin, and pulp, applied to 10 teeth collected during autopsies of drug-related deaths along with blood and hair samples for classic toxicological analyses. Each tooth was prepared by "pulverization technique" and then analysed by gas chromatography paired with mass spectrometry (GC-MS) and ultra high performance liquid chromatography coupled to high resolution mass spectrometry (UHPLC/HR-MS) for searching cocaine, opiates, and metabolites. The results were then compared with those obtained from blood and hair samples. RESULTS: Preliminary results demonstrated that teeth differ from any other classic matrix (blood and hairs) since the qualitative correspondence of the detected substances between pulp and blood as well as dental hard tissues and hair suggests that they can be useful in post-mortem evaluation as a unique matrix for both acute and chronic assumptions of drugs. The mechanism of accumulation of substances in mineralized dental tissues emerged the most significant result, being influenced by the type of molecule and the method of assumption. The main limitation of this study is the limited availability of the sample and the absence of anamnestic information of the time, rates and method of drug assumption during life. Further research is necessary to systematically investigate the distribution of different substances within the different tissues of the tooth.

Evolutionary Design of Self-Templated Supramolecular Fibrils Using M13 Bacteriophage for Tissue Engineering.

Biomaterials in nature form hierarchical structures and functions across various length scales through binding and assembly processes. Inspired by nature, we developed hierarchically organized tissue engineering materials through evolutionary screening and self-templating assembly. Leveraging the M13 bacteriophage (phage), we employed an evolutionary selection process against hydroxyapatite (HA) to isolate HA-binding phage (HAPh). The newly discovered phage exhibits a bimodal length, comprising 950 nm and 240 nm, where the synergistic effect of these dual lengths promotes the formation of supramolecular fibrils with periodic banded structures. The assembled HAPh fibrils show the capability of HA mineralization and the directional growth of osteoblast cells. When applied to a dentin surface, it induces the regeneration of dentin-like tissue structures, showcasing its potential applications as a scaffold in tissue engineering. The integration of evolutionary screening and self-templating assembly holds promise for the future development of hierarchically organized tissue engineering materials.

Antibacterial Property and Mechanisms of Au@Ag Core-Shell Nanoparticles with Near-Infrared Absorption Against E. faecalis Infection of Dentin.

Background: Enterococcus faecalis (E. faecalis) is one of the main pathogens responsible for refractory root canal infections in the teeth and shows resistance against various antibacterial managements. Effective control of E. faecalis infection is a prerequisite for successful treatment of refractory apical periodontitis. This study aimed to analyze the antibacterial activity and mechanisms of Au@Ag nanoparticles (NPs) combined with photothermal therapy (PTT) against the original and Ag+-resistant E. faecalis. Methods: Au@AgNPs with optimal shell thicknesses were synthesized and characterized. The antibacterial activity of Au@AgNPs with PTT against the original or Ag+-resistant E. faecalis was evaluated, and the antibiofilm activity was tested on E. faecalis biofilm on the dentin of teeth. The potential antibacterial mechanisms of Au@AgNPs combined with PTT against E. faecalis have also been studied. Moreover, its influence on dentin microhardness and cytotoxicity was assessed. Results: This study revealed that Au@AgNPs combined with PTT showed enhanced antibacterial and antibiofilm effects, no negative effects on dentin microhardness, and low cytotoxicity toward human periodontal ligament cells (hPDLCs). Moreover, Au@AgNPs combined with PTT effectively inhibited the growth of Ag+-resistant E. faecalis. Its antibacterial effects may be exerted through the release of silver ions (Ag+), destruction of the cell membrane, production of reactive oxygen species (ROS) and inhibition of adenosine triphosphate (ATP) production. Hyperthermia generated by Au@AgNPs with PTT reduced membrane fluidity and enhanced Ag+ sensitivity by downregulating fabF expression. The upregulated expression of heat shock genes demonstrated that the Ag+ released from Au@AgNPs compromised the heat adaptation of E. faecalis. Conclusion: PTT significantly enhanced Ag+ sensitivity of the original and Ag+-resistant E. faecalis. Au@AgNPs combined with PTT may have the potential to be developed as a new antibacterial agent to control E. faecalis infections in teeth.

Engineering Interfacial Integrity with Hydrolytic-Resistant, Self-Reinforcing Dentin Adhesive.

The leading cause of composite restoration failure is secondary caries, and although caries is a multifactorial problem, weak, damage-prone adhesives play a pivotal role in the high susceptibility of composite restorations to secondary caries. Our group has developed synthetic resins that capitalize on free-radical polymerization and sol-gel reactions to provide dental adhesives with enhanced properties. The resins contain γ-methacryloxypropyltrimethoxysilane (MPS) as the Si-based compound. This study investigated the properties of methacrylate-based resins containing methacryloxymethyltrimethoxysilane (MMeS) as a short-chain alternative. The degree of conversion (DC), polymerization kinetics, water sorption, mechanical properties, and leachates of MMeS- and MPS-resins with 55 and 30 wt% BisGMA-crosslinker were determined. The formulations were used as model adhesives, and the adhesive/dentin (a/d) interfaces were analyzed using chemometrics-assisted micro-Raman spectroscopy. The properties of the 55 wt% formulations were comparable. In the 30 wt% BisGMA formulations, the MMeS-resin exhibited faster polymerization, lower DC, reduced leachates, and increased storage and loss moduli, glass transition (Tg), crosslink density, and heterogeneity. The spectroscopic results indicated a comparable spatial distribution of resin, mineralized, and demineralized dentin across the a/d interfaces. The hydrolytically stable experimental short-chain-silane-monomer dental adhesive provides enhanced mechanical properties through autonomous strengthening and offers a promising strategy for the development of restorative dental materials with extended service life.

Ion release of the glass ionomer restoration with silver diamine fluoride dentin pretreatment.

OBJECTIVE: To assess the fluoride and silver ion release of glass ionomer cement (GIC) restorations, including conventional GIC (CGIC) and resin-modified GIC (RMGIC) restorations, with 38 % silver diamine fluoride (SDF) solution dentin pretreatment. METHODS: Eighty dentin blocks were allocated into 4 groups and restored with SDF+CGIC, CGIC, SDF+RMGIC and RMGIC, respectively. Each block was stored in deionized water at 37 °C for 2 years. Fluoride and silver ion concentration in storage solution was measured using ion-selective electrode and inductively coupled plasma-optical emission spectrometry for up to 2 years. The cross-sectional surfaces of restored dentin blocks were assessed by X-Ray diffraction analysis (XRD), scanning electron microscope (SEM) with energy-dispersive X-ray spectroscopy (EDS) after 1 week and 2 years, respectively. RESULTS: The mean ± standard deviation (SD) of accumulative fluoride releasing in SDF+CGIC, CGIC, SDF+RMGIC and RMGIC for 2 years were 0.13±0.005 mg, 0.09±0.006 mg, 0.15±0.008 mg and 0.05±0.003 mg, respectively (Groups SDF+RMGIC > SDF+CGIC > CGIC >RMGIC, p < 0.05). The mean ± SD of accumulative silver releasing in SDF+CGIC, CGIC, SDF+RMGIC and RMGIC for 2 years were 0.03±0.009 mg, 0.00±0.00 mg, 0.01±0.003 mg, and 0.00±0.00 mg, respectively (Groups SDF+CGIC > SDF+RMGIC > CGIC&RMGIC, p < 0.05). Groups SDF+CGIC and SDF+RMGIC showed sustainably higher fluoride and silver releasing compared to Groups CGIC and RMGIC (p < 0.05). XRD analysis indicated the fluorapatite and silver chloride were observed only in Groups SDF+CGIC and SDF+RMGIC, but not in Groups CGIC and RMGIC. SEM images of the cross-sectional view of the dentin blocks showed silver crystals within dentinal tubules 1 week and 2-year in Groups with SDF pretreatment. CONCLUSION: The 38 % SDF dentin pretreatment sustainably increased the fluoride and silver release of GIC and RMGIC restorations for up to 2 years.

Effect of bioceramic intracanal medication on the dentinal bond strength of bioceramic cements: an ex-vivo study.

Background: The present study evaluated the effect of a bioceramic intracanal medicament (Bio-C Temp) on the push-out bond strength of bioceramic cements. Methods: Forty-eight human single-canaled premolars were prepared and randomly divided into three groups: Group (A) received no intracanal medicament; Group (B) calcium hydroxide (CH); and Group (C) Bio-C Temp. After medicament removal, the roots were sectioned transversely. The slices in each group were separated into two subgroups (n = 16): in Subgroup (1), mineral trioxide aggregate (MTA) was placed, and in Subgroup (2) Bio-C Repair. Push-out bond strength was determined using a universal testing machine, applying a constant compressive force on the cement until bond failure. The failure mode was also evaluated. Data were analyzed using the Chi-square test and two-way ANOVA followed by Tukey's post hoc tests. The level of significance was set at 5%. Results: The pushout bond strength of Bio-C Repair was significantly higher than that of MTA irrespective of intracanal medication (p = 0.005). The placement of Bio-C Temp was associated with significantly lower bond strength (p = 0.002, p = 0.001). Conclusion: Bio-C Repair showed better bond strength compared to MTA, irrespective of intracanal medication. Bio-C Temp intracanal medicament, however, decreased the bond strength of both these cements.

Amelogenin-Inspired Autoadaptive Peptide in a Caries Microenvironment Facilitates Long-Term Protection of the Dentin-Pulp Complex.

Dental caries, one of the most prevalent infectious diseases, is the primary contributor to the early loss of natural teeth and is a significant public health issue. Known as the tooth's bioactive core, the dentin-pulp complex (DPCX) comprises tightly connected hard and soft tissues that not only serve as a biological barrier for the inner tooth tissue but also produce reparative dentin following mild disruptions. While efforts to preserve DPCX are numerous, most strategies focus on temporary antibacterial measures, inflammation reduction, or tissue regeneration, lacking a comprehensive, long-lasting solution. In this study, TVH-19, an autoadaptive peptide mimicking the pH- and ion-responsive capacity of amelogenin, was designed to exert multifaceted preservation of DPCX, providing a comprehensive strategy for preserving vital pulp. Leveraging its unique amphiphilicity-related cell penetration and ion/pH-responsive self-assembly properties, TVH-19 outperforms conventional pulp preservation materials by being capable of rapid cell penetration, minimizing diffused side effects, providing environment-responsive self-assembly/disassembly for balanced long-term antibacterial and cell protection, and facilitating the formation of lysosomal-escaping intracellular aggregates for the continuous activation of PDGFRα+ dental pulp stem cells.

Biocompatibility, bioactivity, porosity, and sealer/dentin interface of bioceramic ready-to-use sealers using a dentin-tube model.

This study evaluated the biocompatibility, bioactivity, porosity, and sealer/dentin interface of Sealer Plus BC (SP), Bio-C Sealer (BIOC), TotalFill BC Sealer (TF), and AH Plus (AHP). Dentin tubes filled with the sealers and empty tubes (control group) were implanted in the subcutaneous tissue of rats for different periods (n = 6 per group/period). Number of inflammatory cells (ICs), capsule thickness, von Kossa reaction, interleukin-6 (IL-6) and osteocalcin (OCN) were evaluated. Porosity and voids in the interface dentin/sealers were assessed by micro-computed tomography. The data were submitted to ANOVA/Tukey's tests (α = 0.05). Greater capsule thickness, ICs and IL-6 immunolabeling cells were observed in AHP. No significant difference in thickness of capsule, ICs, and IL-6- immunolabeling cells was detected between SP and TF, in all periods, and after 30 and 60 days between all groups. At 60 days all groups had reduction in capsule thickness, ICs and IL-6 immunolabeling cells. Von Kossa-positive and birefringent structures were observed in the capsules around the sealers. BIOC, SP, and TF exhibited OCN-immunolabeling cells. All sealers had porosity values below 5%, besides low and similar interface voids. BIOC, SP and TF are biocompatible, bioactive, and have low porosity and voids. The dentin-tube model used is an alternative for evaluating bioceramic materials.

A novel bi-layered asymmetric membrane incorporating demineralized dentin matrix accelerates tissue healing and bone regeneration in a rat skull defect model.

Objectives: The technique of guided bone regeneration (GBR) has been widely used in the field of reconstructive dentistry to address hard tissue deficiency. The objective of this research was to manufacture a novel bi-layered asymmetric membrane that incorporates demineralized dentin matrix (DDM), a bioactive bone replacement derived from dentin, in order to achieve both soft tissue isolation and hard tissue regeneration simultaneously. Methods: DDM particles were harvested from healthy, caries-free permanent teeth. The electrospinning technique was utilized to synthesize bi-layered DDM-loaded PLGA/PLA (DPP) membranes. We analyzed the DPP bilayer membranes' surface topography, physicochemical properties and degradation ability. Rat skull critical size defects (CSDs) were constructed to investigate in vivo bone regeneration. Results: The synthesized DPP bilayer membranes possessed suitable surface characteristics, acceptable mechanical properties, good hydrophilicity, favorable apatite forming ability and suitable degradability. Micro-computed tomography (CT) showed significantly more new bone formation in the rat skull defects implanted with the DPP bilayer membranes. Histological evaluation further revealed that the bone was more mature with denser bone trabeculae. In addition, the DPP bilayer membrane significantly promoted the expression of the OCN matrix protein in vivo. Conclusions: The DPP bilayer membranes exhibited remarkable biological safety and osteogenic activity in vivo and showed potential as a prospective candidate for GBR applications in the future.

Prodelphinidins enhance dentin matrix properties and promote adhesion to methacrylate resin.

OBJECTIVE: Investigate the bioactivity and stability of Rhodiola rosea (RR) fractions as a natural source of prodelphinidin gallate (PDg) on dentin collagen via analysis of the viscoelastic and resin-dentin adhesive properties of the dentin matrix. METHODS: The biomimicry and stability of RR subfractions (F1, F2, F3 and F4) with collagen were determined by dynamic mechanical analysis (DMA). DMA used a strain sweep method to assess the dentin matrix viscoelastic properties [storage (E'), loss (E"), and complex (E*) moduli and tan δ] after treatment, 7-, 30- and 90-days of storage in simulated body fluids (SBF). Resin-dentin interface properties were assessed after 1 and 90-days in SBF by microtensile bond strength test and confocal laser scanning microscopy. Data were analyzed using two and one-way ANOVA and post-hoc tests (α = 0.05). RESULTS: RR fractions increased dentin matrix complex (96 - 69 MPa) and storage (95 - 68 MPa) moduli, compared to the control (∼9 MPa) in the ranking order: F2 ≥ F3 = F1 = F4 > control (p < 0.001). Treatment did not affect tan δ values. After 30- and 90-days, RR-treated dentin E*, E' and tan δ decreased (p < 0.001). F2 fraction yielded the highest microtensile bond strength (43.9 MPa), compared to F1, F4 (35.9 - 31.7 MPa), and control (29 MPa). RR-treated interfaces mediated stable surface modifications and enhanced collagen-methacrylate resin interactions at the bioadhesive interface. SIGNIFICANCE: Prodelphinidin gallates from RR are potent and reasonably stable biomimetic agents to dentin. Higher potency of F2 fraction with the dentin matrix and the adhesive interface is associated with a degree of polymerization of 2-3 and gallo(yl) motifs.

Dual- or single rinse? The tubular sealer penetration of endodontic chelating agents.

INTRODUCTION: In this study, we aimed to compare the effectiveness of various chelating agents, ethilenediaminetetraacetic acid (EDTA), citric acid (CA), and etidronic acid (HEDP) mixed in two different forms, in removing the smear layer and promoting the penetration of an endodontic sealer into the dentinal tubules of extracted single-rooted teeth. METHODS: The study used 75 teeth divided into five groups: 17% EDTA, 10% CA, 9% HEDP + NaOCl, 9% HEDP + distilled water (DW), and a control (DW) group. Scanning electron microscopy was used to assess smear layer removal and confocal laser microscopy was used to evaluate tubular sealer penetration at different depths from the apical tip. RESULTS: Sealer penetration was highest with 17% EDTA and 10% CA as compared with the other agents (p<0.001). At the cervical third, the sealer penetration for EDTA, HEDP + NaOCl, and HEDP + DW groups were significantly different than those in DW (p = 0.020). For the middle third, EDTA, CA, and HEDP + NaOCl groups were significantly higher than those of the DW group (p<0.001). Cervical-level values were significantly higher than apical-level values for HEDP + NaOCl, HEDP + DW, and DW (p<0.001). Smear layer removal was lower with 9% HEDP + DW than with 17% EDTA and 10% CA at all depths (p<0.001). A significancy in smear layer removal was observed between 10% CA and control (p = 0.015) in middle depth. CONCLUSION: Within the limitations of this study, highest values were seen in EDTA and CA in terms of sealer penetration and smear layer removal. In the light of these findings, the use of strong chelating agents highlights better clinical efficiency than dual-rinse or single HEDP irrigation.

Influence of bioceramic sealer residues on the adhesion interface with a universal adhesive in the etch-and-rinse strategy, based on the application protocol and evaluation time.

The aim of this study was to evaluate the effects of the application of universal adhesive in the etch-and-rinse (ER) strategy with a manual brush (MB) or rotary brush (RB) in adhesion to dentin impregnated (WB) or not (NB) with bioceramic sealer, at 24 h and 1 year. Eighty-eight crowns of bovine incisors were divided into four groups (n=22): WB-MB, WB-RB, NB-MB, NB-RB. After the restorative protocol, dentin penetrability was evaluated by confocal microscopy. Bond strength was evaluated by microtensile test. Data were analyzed using one-way ANOVA/Tukey tests (α=0.05). NB-RB and WB-RB exhibited greater extensions of resin tags in dentin. At 24 h, WB-RB and NB-MB showed the highest and lowest values of bond strength, respectively. At 1 year, WB-MB and WB-RB demonstrated the highest bond strength values. The RB increases the formation of resin tags and residues of bioceramic sealer provides higher bond strength in the ER strategy.

New Monomer Capable of Dual Chemical Binding with Dentin to Improve Bonding Durability.

The water-rich nature of the dentin bonding microenvironment, coupled with the stresses on the bonding interface, contributes to the hydrolytic degradation of the hybrid layer, resulting in a decline in bonding durability and, ultimately, restoration failure. Currently, the 3-step etch-and-rinse technique remains the gold standard for dentin bonding, and the bonding mechanism mainly involves a physical interaction with little chemical bonding. In this study, we have developed a siloxane-modified polyurethane monomer (SPU) with acrylate and siloxane modifications that chemically binds to both collagen and hydroxyapatite in dentin. Formulated as a bisphenol A-glycidyl methacrylate alternative, the SPU monomer-based adhesive was designed to improve dentin bonding quality and durability. Attenuated total reflection Fourier transform infrared spectroscopy, thermogravimetric analysis, X-ray photoelectron spectroscopy, scanning electron microscopy, transmission electron microscope, and hydroxyproline release assays were performed on SPU-treated collagen, hydroxyapatite, and acid-etched dentin slices to dentin. The physicochemical properties of the configured SPU adhesives were profiled for polymerization behavior, water contact angle, and tensile strain and strength. The bonding effectiveness was assessed through micro-tensile strength, nano-leakage tests conducted on the bonded samples before and after thermal cycle aging. Finally, we further conducted in vivo and in vitro experiments to assess the biocompatibility of adhesives. The results showed that the siloxane groups of SPU monomer could covalently bind to dentin collagen and hydroxyapatite. The incorporation of SPU in the adhesive led to a significant increase in adhesive polymerization (P < 0.05) and tensile strain at break up to 134.11%. Furthermore, the SPU adhesive significantly improved dentin bond strength (P < 0.05), reduced interfacial nano-leakage (P < 0.05), and displayed good biocompatibility. In conclusion, the application of SPU, which achieves dual chemical bonding with dentin, can improve the quality of the hybrid layer, buffer the interfacial stresses, enhance the interfacial resistance to hydrolysis, and provide a feasible strategy to extend the service life of adhesive restorations.

Effects of endodontic root canal irrigants on tooth dentin revealed by infrared spectroscopy: a systematic literature review.

BACKGROUND: Root canal irrigation endodontic solutions have effects on the chemistry of dentin. Infrared spectroscopy is a non-destructive chemical characterization method where the strength of absorption often correlates with mineral or organic composition. OBJECTIVES: To survey effects of commonly used irrigation solutions on the composition of root dentin as detected by widely-available Fourier transform infrared spectroscopy (FTIR) methods. METHODS: Electronic databases were searched for articles published between 1983 to 2023. After risk of bias assessments (OHAT), studies were grouped according to effects per irrigation solution. Inclusion criteria comprised in vitro studies that used extracted human or bovine teeth, treated by irrigation solutions characterized using FTIR spectroscopy and presenting spectral data. Publications that did not present spectra were excluded. RESULTS: A wide range of concentrations, durations, and treatment protocols have been tested but only 30 out of 3452 studies met our inclusion criteria. Different FTIR methods were used with Attenuated Total Reflection (ATR) variant being the most common (21 studies). Investigated solutions included sodium hypochlorite (NaOCl), ethylenediaminetetraacetic-acid (EDTA), 1-hydroxyethylidene-1-1-diphosphonic-acid (HEDP), peracetic-acid (PAA), glycolic-acid (GA), and citric-acid (CA) though most focused on NaOCl and EDTA. All solutions had detectable effects in the FTIR signature of dentin. NaOCl mainly affects the organics, revealing reduced amide/phosphate ratios with increasing concentrations. EDTA mainly effects the inorganic component, with the effects increasing with time and concentration, yet glycolic acid has stronger effects than EDTA on dentin. Beyond the type of irrigant and dentin exposure durations, concentration and protocol of application had strong effects. There is a lack of studies comparing similar irrigants under conditions that mimic clinical scenarios analyzing bulk sample because FTIR of powder dentin differs from FTIR of bulk dentin. SIGNIFICANCE: The ideal root-canal irrigant should combine local disinfection properties with minimal compositional effects on healthy dentin. FTIR methods appear reliable to identify important changes in root dentin chemical composition. Such information can help understand when endodontic irrigation might lead to root degradation or possibly contribute to long term failures such as vertical fractures. Awareness of chemical damage from irrigation procedures may help clinicians select procedures that reduce deleterious effects on the root canal structures.