Polybrominated diphenyl ethers in indoor dust from Brazil: assessing demographic differences and human health exposure.

Indoor house dust is considered an important human exposure route to polybrominated diphenyl ethers (PBDEs), which has raised concern about their environmental persistence and toxicity properties. In this study, eight PBDEs (BDE-28, -47, -99, -100, -153, -154, -183, and -209) were determined in house dust from two cities with different socio-demographic characteristics from Brazil, examining possible relationships with factors that potentially influence contamination (population density, economic activities, presence of electronic equipment, and so on) and also estimating the risk of human exposure through oral ingestion and dermal contact. The Σ8PBDE concentration in Sorocaba city ranged between 380 and 4269 ng/g dw, while in Itapetininga city ranged from 106 to 1000 ng/g dw. In both regions, BDE-209 was the most abundantly found congener, followed by BDE-99. House dust from Sorocaba presented significantly greater concentrations of BDE-183 and BDE-209 than Itapetininga. Regarding risk exposure assessment, the estimated daily intake (EDI) of PBDEs was much lower than their respective reference doses (RfDs) in all pathways estimated (non-dietary ingestion and dermal contact). This study provided valuable data to improve the knowledge about the presence and exposure to PBDEs in Brazilian house dust in comparison to other developing countries and the need to control environmental pollution and protect human health.

Tracking fine particles in urban and rural environments using honey bees as biosamplers in Mexico.

This work explores the efficiency of honey bees (Apis mellifera) as biosamplers of metal pollution. To understand this, we selected two cities with different urbanization (a medium-sized city and a megacity), and we collected urban dust and honey bees captured during flight. We sampled two villages and a university campus as control areas. The metal content in dust was analyzed by inductively coupled plasma mass spectrometry (ICP-MS). Atomic Force Microscopy (AFM) and Scanning electron microscopy (SEM) were used to investigate the shape and size distribution of the particles, and to characterize the semiquantitative chemical composition of particles adhered to honey bee's wings. Principal Component Analysis (PCA) shows a distinctive urban dust geochemical signature for each city, with component 1 defining V-Cr-Ni-Tl-Pt-Pb-Sb as characteristic of Mexico City and Ce-As-Zr for dust from Hermosillo. Particle count using SEM indicates that 69% and 63.4% of the resuspended dust from Hermosillo and Mexico City, respectively, corresponds to PM2.5. Instead, the particle count measured on the honey bee wings from Hermosillo and Mexico City is mainly PM2.5, 91.4% and 88.9%, respectively. The wings from honey bees collected in the villages and the university campus show much lower particle amounts. AFM-histograms confirmed that the particles identified in Mexico City have even smaller sizes (between 60 and 480 nm) than those in Hermosillo (between 400 and 1400 nm). Particles enriched in As, Zr, and Ce mixed with geogenic elements such as Si, Ca, Mg, K, and Na dominate honey bee' wings collected in Hermosillo. In contrast, those particles collected from Mexico City contain V, Cr, Ni, Tl, Pt, Pb, and Sb. Such results agree with the urban dust data. This work shows that honey bees are suitable biosamplers for the characterization of fine dust fractions by microscopy techniques and reflect the urban pollution of the sites.

Environmental and structural factors associated with bacterial diversity in household dust across the Arizona-Sonora border.

We previously reported that asthma prevalence was higher in the United States (US) compared to Mexico (MX) (25.8% vs. 8.4%). This investigation assessed differences in microbial dust composition in relation to demographic and housing characteristics on both sides of the US-MX Border. Forty homes were recruited in the US and MX. Home visits collected floor dust and documented occupants' demographics, asthma prevalence, housing structure, and use characteristics. US households were more likely to have inhabitants who reported asthma when compared with MX households (30% vs. 5%) and had significantly different flooring types. The percentage of households on paved roads, with flushing toilets, with piped water and with air conditioning was higher in the US, while dust load was higher in MX. Significant differences exist between countries in the microbial composition of the floor dust. Dust from Mexican homes was enriched with Alishewanella, Paracoccus, Rheinheimera genera and Intrasporangiaceae family. A predictive metagenomics analysis identified 68 significantly differentially abundant functional pathways between US and MX. This study documented multiple structural, environmental, and demographic differences between homes in the US and MX that may contribute to significantly different microbial composition of dust observed in these two countries.

Global quantification of emerging and legacy per- and polyfluoroalkyl substances in indoor dust: Levels, profiles and human exposure.

This study investigated the occurrence and distribution of per- and polyfluoroalkyl substances (PFASs) in house dust samples from six regions across four continents. PFASs were detected in all indoor dust samples, with total median concentrations ranging from 17.3 to 197 ng/g. Among the thirty-one PFAS analytes, eight compounds, including emerging PFASs, exhibited high detection frequencies in house dust from all six locations. The levels of PFASs varied by region, with higher concentrations found in Adelaide (Australia), Tianjin (China), and Carbondale (United States, U.S.). Moreover, PFAS composition profiles also differed among regions. Dust from Australia and the U.S. contained high levels of 6:2 fluorotelomer phosphate ester (6:2 diPAP), while perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS) were predominant in other regions. Furthermore, our results indicate that socioeconomic factors impact PFAS levels. The assessment of human exposure through dust ingestion and dermal contact indicates that toddlers may experience higher exposure levels than adults. However, the hazard quotients of PFASs for both toddlers and adults were below one, indicating significant health risks are unlikely. Our study highlights the widespread occurrence of PFASs in global indoor dust and the need for continued monitoring and regulation of these chemicals.

Microplastics suspended in dust from different indoor environments in Barranquilla, Colombia: Predominant microparticles?

Considering that microplastics (MPs) are classified as ubiquitous pollutants, that air quality affects human health, and that people remain indoors most of the time, the need has arisen to evaluate the exposure to MPs within the suspended dust in indoor environments. With this objective, the present study carried out passive sampling to analyze the precipitation of microparticles in some indoor residential environments (2 apartments) and workplaces (an office, a pastry shop, a gift shop, and a paint shop) in Barranquilla, Colombia. The quantification and physical characterization of microparticles were carried out under a stereomicroscope, and the chemical characterization was carried out by infrared microspectroscopy (µFTIR). The highest average concentration of MPs in the apartments was found in the air-conditioned rooms (1.1 × 104 MP/m2/day), and concerning the workplaces, the gift shop and the paint shop were the spaces with a higher proportion of MPs (6.0-6.1 × 103 MP/m2/day), with polyesters being the main synthetic polymers, but being semi-synthetic particles the predominant among the samples. Regarding its morphology, fibers were the most abundant shape (>90%), grouping mainly in the 1000-5000 µm range, while the few fragments found were mostly grouped below 50 µm. Exposure by inhalation of MPs in adults was estimated between 1.7 × 102-1.6 × 103 MP/kg/day, while by ingestion it ranged between 2.7 × 102-2.4 × 103 MPs/kg/day. On the other hand, within our research, a significant presence of non-plastic microparticles was found, which reached up to 69% in analyzed samples, corresponding mainly to cotton and cellulose, so we suggest that these should also be included in future studies that aim to estimate potential health implications from exposure to suspended micropollutants.

Assessing heavy metal contamination in a Brazilian metropolis: a case study with a focus on (bio)indicators.

The continuous expansion of the global vehicle fleet poses a growing threat to environmental quality through heavy metal contamination. In this scenario, monitoring to safeguard public health in urban areas is necessary. Our study involved the collection of 36 street dust and 29 moss samples from roads of a Brazilian metropolis (Recife) with varying traffic intensities as follows: natural reserve (0 vehicles per day), low (< 15,000 vehicles per day), medium (15,000-30,000 vehicles per day), and high (> 30,000 vehicles per day). ICP-AES analysis was performed to determine the concentrations of nine potentially toxic metals (Ba, Cd, Cr, Cu, Mn, Ni, Pb, V, and Zn) to assess the influence of vehicular flow on urban contamination. In the street dust samples, the mean metal concentrations (mg kg-1) exhibited the following order: Ba (503.7) > Mn (303.0) > Zn (144.4) > Cu (95.3) > Cr (56.1) > Pb (34.2) > V (28.7) > Ni (11.3) > Cd (1.5). Conversely, in the moss samples, the metal concentration order was as follows (mg kg-1): Mn (63.8) > Zn (62.5) > Ba (61.0) > Cu (17.7) > Cr (8.0) > V (7.3) > Pb (7.0) > Ni (2.9) > Cd (0.3). Roads with higher traffic volumes exhibited the highest metal enrichments in moss samples for all metals and in dust samples for Cd, Cr, Mn, Ni, and V. However, dust from low-flow roads had higher enrichments for Ba, Cu, and Zn, indicating the influential role of other traffic-related factors in metal deposition. Our findings highlight traffic flow as the predominant source of pollution in urban centers, with both street dust and moss serving as sensitive indicators of metal input attributable to vehicular traffic. These indicators offer valuable insights for urban quality monitoring and pollution control efforts.

Desert dust episodes during pregnancy are associated with increased preterm delivery in French Guiana.

Preterm deliveries are a major multifactorial public health problem in French Guiana. Desert dust episodes have been associated with preterm delivery in Guadeloupe, a territory with similarities to French Guiana. We thus tried to replicate this finding in the context of French Guiana. A retrospective ecological cohort study combined daily PM10 concentration measurements during pregnancy and term at delivery extracted from French Guiana's computerized pregnancy delivery registry. Daily PM10 concentrations during the course of pregnancy were analyzed as mean concentrations and as the proportion of intense dust episodes (≥55 µg PM10/m3). These exposure variables were studied in relation to the outcome of preterm delivery. Overall, 3,321 pregnant women with complete daily PM10 measurements were included, of whom 374 (11.26%) delivered prematurely. Among preterm deliveries, 168 (44.9%) were spontaneous deliveries and 206 (55.1%) were induced. Rank-sum tests showed that, for spontaneous and induced spontaneous deliveries, both mean PM10 concentrations and proportions of intense desert dust episodes were significantly greater among preterm births than among term births. Although the proportion of intense desert dust episodes during pregnancy was significantly associated with spontaneous preterm deliveries, the relation was U-shaped, with an adjusted odds ratio (AOR) = 2 (95%CI = 1.2-3.1) for lowest values relative to median values and AOR = 5.4 (95%CI = 3.2-8.9) for the highest values relative to median values. Similarly, the proportion of intense desert dust episodes during pregnancy was also significantly associated with induced preterm deliveries in a U-shaped manner (AOR = 2.7 (95%CI = 1.6-4.5) for the lowest relative to median values and AOR = 6.8 (95%CI = 3.9-11.9) for the highest relative to median values). Although in our study the relation between PM10 concentrations appeared non-linear, the highest mean concentrations and intense desert dust episodes were indeed associated with both spontaneous and induced preterm delivery.

Higher heavy metal contamination indoors than outdoors during COVID-19 in Mexico City.

People spend most of their time indoors, especially during the coronavirus disease. Prolonged exposure to heavy metal-contaminated dust can be harmful to human health. The objectives of this study were to identify the contamination level in outdoor and indoor dust, compare contamination in both environments, and assess the human health risk. Two-hundred thirty-nine samples of dust were taken by Mexico City citizens in 38 homes on the weekends of May 2020. Heavy metal concentrations were measured through XRF. The contamination level was set using the contamination factor with a local and global background value, mixed linear models were used to identify indoor and outdoor differences, and USEPA human health risk methodology was used. Pb, Zn, and Cu had the highest contamination levels, followed by Sr and Mn, using both the local and global background values. The Pb, Zn, and Cu contamination was greater indoors, while higher Mn, Sr, and Fe were detected outdoors. According to the outdoor/indoor ratios, the main sources of Ca, Pb, Zn, and Cu must be indoors, while the main sources of Fe, Mn, Sr, Y, and Ti are outdoors. A human health risk was not detected, as the hazard index was lower than one. However, ailments can be developed due to exposure to Pb, Mn, and Fe in children (hazard index > 0.1). A higher risk due to Pb exposition was found indoors. Indoor environments in Mexico City were more contaminated by heavy metals and represented a higher risk to human health than outdoors during the pandemic isolation.

Microbial composition of Saharan dust plumes deposited as red rain in Granada (Southern Spain).

During durst storms, also biological material is transported from arid areas such as the Sahara Desert. In the present work, rain samples containing significant amounts of mineral dust have been collected in Granada during different red rain episodes. Biological features (bacteria, biofilm, pollen grain and fungal spore) as well as size-particle distribution and mineralogical composition were studied by SEM. Nanobacteria were observed for the first time in red rain samples. A preliminary metabarcoding analysis was performed on three red rain samples. Here, Bacillota made up 18 % and Pseudomonadota 23 % of the whole prokaryotic community. The fungal community was characterized by a high abundance of Ascomycota and, dependent on the origin, the presence of Chytridiomycota. By means of 16S rRNA sequencing, 18 cultivable microorganisms were identified. In general, members of the phyla Pseudomonadota and Bacillota made up the majority of taxa. Some species, such as Peribacillus frigoritolerans and Bacillus halotolerans were isolated during three different red rain episodes. Generally, red rain carries a wide variety of microorganisms, being their ecosystem and health effects largely unknown.

Air quality and characterization of synoptic circulation weather patterns in a South American city from Argentina.

The potential cause-effect relationship between synoptic meteorological conditions and levels of criteria air pollutants, including CO, NO2, O3, PM10, PM2.5 and SO2, in Bahia Blanca, Argentina, was assessed for the period of 2018-2019. Daily back-trajectories and global meteorological data fields were employed to characterize the primary transport paths of air masses reaching the study site, and to identify the synoptic meteorological patterns responsible for these atmospheric circulations. Time series of surface-level meteorological parameters and midday mixing layer height were collected to examine the impact of the synoptic meteorological patterns on local meteorology. Furthermore, the NAAPS global aerosol model was utilized to identify days when contributions from long-range transport processes, such as dust and/or biomass burning smoke, impacted air quality. By applying this methodology, it was determined that the air masses coming from the N, NW and W regions significantly contributed to increased mean concentrations of coarse particles in this area through long-range transport events involving dust and smoke. Indeed, the high average levels of PM10 recorded in 2018-2019 (annual mean values of 47 and 52 µg/m3, respectively) represent the main air quality concern in Bahía Blanca. Moreover, PM10, PM2.5 and NO2 emissions should be reduced in order to meet recommended air quality guidelines. On the other hand, the results from this study suggest that the sources and meteorological processes leading to the increase in the concentrations of CO and SO2 have a local-regional origin, although these air pollutants did not reach high values probably as a consequence of the strong wind speed registered in this region during any synoptic meteorological pattern.

Occurrence of pesticide residues in indoor dust of farmworker households across Europe and Argentina.

Pesticides are widely used as plant protection products (PPPs) in farming systems to preserve crops against pests, weeds, and fungal diseases. Indoor dust can act as a chemical repository revealing occurrence of pesticides in the indoor environment at the time of sampling and the (recent) past. This in turn provides information on the exposure of humans to pesticides in their homes. In the present study, part of the Horizon 2020 funded SPRINT project, the presence of 198 pesticide residues was assessed in 128 indoor dust samples from both conventional and organic farmworker households across Europe, and in Argentina. Mixtures of pesticide residues were found in all dust samples (25-121, min-max; 75, median). Concentrations varied in a wide range (<0.01 ng/g-206 µg/g), with glyphosate and its degradation product AMPA, permethrin, cypermethrin and piperonyl butoxide found in highest levels. Regarding the type of pesticides, insecticides showed significantly higher levels than herbicides and fungicides. Indoor dust samples related to organic farms showed a significantly lower number of residues, total and individual concentrations than those related to conventional farms. Some pesticides found in indoor dust were no longer approved ones (29 %), with acute/chronic hazards to human health (32 %) and with environmental toxicity (21 %).

Integrating multiple spheres to identify the provenance and risk of urban dust and potentially toxic elements: Case study from central Mexico.

This study aims to improve the current method of studying potentially toxic elements (PTEs) in urban dust using direct chemical evidence (from dust, rock, and emission source samples) and robust geochemical methods. The provenance of urban dust was determined using rare earth elements (REEs) and geochemical diagrams (V-Ni-Th*10, TiO2 vs. Zr, and Zr/Ti vs. Nb/Y). The geogenic or anthropogenic source of PTEs was determined using the enrichment factor (EF) and compositional data analysis (CoDA), while a PTE's point emission source was identified using a 3.1*La-1.54*Ce-Zn diagram, mineralogy, and morphology analyses. The spatiotemporal distribution of PTEs was determined using a geographic information system, and their health risk (by inhalation) was estimated using a lung bioaccessibility test and particle size distribution. We collected urban dust (n = 38), rock (n = 4), and zinc concentrate (n = 2) samples and determined PTEs and REEs in a city of 1.25 million inhabitants in central Mexico. Results showed that urban dust derived from the San Miguelito Range. REEs, Sc, and Zr were geogenic, while Mn, Cu, Zn, As, and Pb were anthropogenic. Due to the presente of sphalerite particles, a zinc refinery was identified as the point emission source of Zn, As, and Pb. High concentrations of Zn (5000-20,008 mg/kg), As (120-284 mg/kg), and Pb (350-776 mg/kg) were found in urban dust near the zinc refinery. Additionally, particles of PM2.5 (66-84%), PM5.0 (13-27%), PM10 (3-8%), and PM20 (0-2%) and lung bioaccessibility of Sr (48.5-72.4%), Zn (9.6-28.4%), Cu (10.5-27.0%), Fe (4.5-8.6%), Mn (2.9-9.2%), Cr (38.3%) and Pb (30.6%) demonstrated a latent risk to human health. These approaches improve our understanding of the provenance of urban dust and its PTE emission sources in urban areas.

The dangerous link between coal dust exposure and DNA damage: unraveling the role of some of the chemical agents and oxidative stress.

Exposure to coal mining dust poses a substantial health hazard to individuals due to the complex mixture of components released during the extraction process. This study aimed to assess the oxidative potential of residual coal mining dust on human lymphocyte DNA and telomeres and to perform a chemical characterization of coal dust and urine samples. The study included 150 individuals exposed to coal dust for over ten years, along with 120 control individuals. The results revealed significantly higher levels of DNA damage in the exposed group, as indicated by the standard comet assay, and oxidative damage, as determined by the FPG-modified comet assay. Moreover, the exposed individuals exhibited significantly shorter telomeres compared to the control group, and a significant correlation was found between telomere length and oxidative DNA damage. Using the PIXE method on urine samples, significantly higher concentrations of sodium (Na), phosphorus (P), sulfur (S), chlorine (Cl), potassium (K), iron (Fe), zinc (Zn), and bromine (Br) were observed in the exposed group compared to the control group. Furthermore, men showed shorter telomeres, greater DNA damage, and higher concentrations of nickel (Ni), calcium (Ca), and chromium (Cr) compared to exposed women. Additionally, the study characterized the particles released into the environment through GC-MS analysis, identifying several compounds, including polycyclic aromatic hydrocarbons (PAHs) such as fluoranthene, naphthalene, anthracene, 7H-benzo[c]fluorene, phenanthrene, pyrene, benz[a]anthracene, chrysene, and some alkyl derivatives. These findings underscore the significant health risks associated with exposure to coal mining dust, emphasizing the importance of further research and the implementation of regulatory measures to safeguard the health of individuals in affected populations.

Assessing heavy metal pollution load index (PLI) in biomonitors and road dust from vehicular emission by magnetic properties modeling.

Vehicular traffic occupies a significant place among the sources of air pollution, due to population and urban growth that has led to an excessive increase in the vehicle fleet worldwide, and in Costa Rica as well. Vehicle emissions generate greenhouse gases (GHGs), particulate matter (PM), and heavy metals (HMs), due to combustion products from fossil-fuel engines, tire wear, and brake linings. HMs are important because they cannot be degraded or destroyed naturally; however, they can be diluted by physicochemical agents and be incorporated into trophic chains where they can be bioaccumulated causing significant negative effects on human well-being and ecological quality. This study aimed to assess the HM pollution load in biomonitors and road dust from vehicular emissions by chemical analyses and magnetic properties modeling. For this purpose, chemical and magnetic property analyses were carried out on samples of road dust and leaves of Cupressus lusitanica Mill. and Casuarina equisetifolia L., which were sampled during 2 different years in the Greater Metropolitan Area of Costa Rica known as GAM. Contamination factor (CF) and pollution load index (PLI) results showed significant metal pollution in some of the study sites. Contamination by the metals V, Cr, and Zn was most commonly present in the biomonitors, and for road dust, they were Cr, Zn, and Pb. The PLI estimates obtained with the validated support vector machine (SVM) magnetic properties models were consistent (sensitivity, specificity, and precision) with those obtained by chemical analysis, demonstrating the feasibility of this method for the identification of this index of contamination.

Multi-year monitoring of atmospheric dust fall as a sink for lead in an agro-industrial and petrochemical city of Argentina. Geo-accumulation and ecological risk assessment.

A multi-year monitoring data set of potentially harmful elements (PHEs), which are present in the chemical composition of atmospheric settleable particulate matter (SPM) in the urban, industrial and port areas in Bahía Blanca, was studied in order to assess potential ecological risk. The selected PHEs were metal elements of local and regional environmental importance (Cd, Cr, Cu, Ni, Pb, and Zn). Seventeen sampling campaigns were carried out between April 2013 and September 2019. After the microwave-assisted acid digestion of samples, the total contents of the PHEs were determined by ICP-OES. The annual dry deposition rate, the indexes associated with the potential ecological risk (RI) and the degree of geo-accumulation (Igeo) of each PHE were calculated. The results indicated that: (a) there are 3 groups (I, II, III) of PHEs with differentiated concentration levels, ranked I (Pb > Zn > Cu) > II (Cr ≈ Ni) > III (Cd) (p < 0.01) in all the studied areas; (b) the median of the total deposition rate was 1 mg cm-2. month-1 with a significant relative contribution of Pb; (c) a considerable increase in geo-accumulation of Pb indicated that SPM was functioning as a sink for Pb, and also reflected a significant progressive increase in the potential ecological risk in all sites (p < 0.01); and (d) there were chemometrically identified potential sources of Pb, Cu and Zn emissions that would be associated mainly to the resuspension of dust from geogenic, industrial and urban origin, and to a lesser extent, to other gaseous emissions of the industrial sector. This work highlights three major aspects of environmental assessment: (a) the value of continuous monitoring as an important tool to detect long-term trends; (b) the importance of the role of dust fall as a useful environmental indicator of lead geo-accumulation; and (c) the great utility of geo-accumulation and potential ecological risk indices as rapid quantitative assessment tools of environmental pollution.

Metal exposure in a child population after a mine tailings dam failure. Projeto Bruminha.

OBJECTIVE: This study aimed to analyze the urinary concentrations of As, Cd, Pb, Hg, and Mn in children living in areas directly affected by the tailings of the Brumadinho disaster. METHODS: We performed a cross-sectional descriptive study on a population of 217 children aged 0 to 6 years, living in Córrego do Feijão (CF), Parque da Cachoeira (PC), Aranha (AR), and Tejuco (TJ), enrolled in the Longitudinal Study of Child Health in Brumadinho (Minas Gerais) - Projeto Bruminha. Socioeconomic data and urine samples were collected to determine the concentration of selected metals. RESULTS: Children living in locations not directly affected by the disaster (AR and TJ) had higher concentrations of As and Mn than those in directly affected areas (CF and PC). Additionally, children living in locations not potentially exposed to dust from tailings mud or mining activity (AR) showed higher urinary As concentrations than those potentially exposed (CF, PC, and TJ). CONCLUSION: Our results suggest the need to investigate possible sources of As exposure in children living in areas not directly affected by the disaster and not potentially exposed to dust.

Heavy metals concentration, pollution indexes, and health risk assessment of urban road dust in the historical center of Havana, Cuba.

In recent years, the historical center of Old Havana has been under a serious restoration movement which could increase the heavy metal concentrations in street dusts and thus severely impact humans in the area. Therefore, the aim of this work is to study the heavy metal concentrations, pollution indexes, and health risk assessment of urban road dusts from the city in order to assess if this restoration movement is harmful to the citizens and visitors. Street road dust samples were collected at 33 stations for the determination of some heavy metals (Co, Ni, Cu, Zn, and Pb) concentrations using an X-ray fluorescence (XRF) instrument. The mean concentration values of the elements Co, Ni, Cu, Zn, and Pb were 7.0 mg.kg-1, 60.6 mg.kg-1, 73.6 mg.kg-1, 548.7 mg.kg-1, and 60.8 mg.kg-1, respectively. Zn and Pb showed higher values of the background. The study of the enrichment factor (EF), the pollution index (IP), and the integral pollution index (IPI) showed some stations with high values of contamination near construction places. Zn was identified as the major pollutant and correlated to the biggest construction places of the municipality at that moment. However, the hazard index (HI) and carcinogenic risk (CR) values do not show the risk of getting non-carcinogenic or carcinogenic diseases associated with the analyzed pollutants. Therefore, it was safely concluded that the big reconstruction movement does not represent a health problem.

Dust abraded from thiamethoxam-treated seed during sowing: Refining the risk assessment for native bees in Brazil.

During sowing using pneumatic machinery, dust may be abraded from pesticide-treated seed and contaminate adjacent bee-attractive off-crop areas. This study quantified the risk to native bees of dust released during sowing of Brazilian crop seeds treated with a thiamethoxam formulation (Cruiser 350FS). To address toxicity to native bees, adult acute contact LD50 data for thiamethoxam were collated from the literature, a species sensitivity distribution generated, and the HD5 calculated. The LD50 HD5 was used to refine the default safety factor applied to the honeybee acute contact LD50 from 10 to 5.45 for thiamethoxam. Crop-specific abraded dust data (Heubach dust and Heubach AI) were generated for seeds treated with Cruiser 350FS sourced from on-farm and industrial facilities. The mean Heubach dust levels was ranked as cotton = maize > sunflower = soybean > drybean. There was no correlation between the measured residues of thiamethoxam (Heubach AI) and those estimated in dust based on the thiamethoxam content of Cruiser 350FS. A hazard quotient (HQ) for each crop (based on application rate, the default dust deposition factor, and the honeybee contact LD50/10) identified risks during sowing for all crops. Refinement of the application rate with the measured 90th percentile Heubach dust (assuming 100% thiamethoxam) resulted in sowing of industrially treated soybean and on-farm treated cotton being identified as risks. Further refinement using either the measured 90th percentile Heubach AI or the acute contact LD50 (HD5 ) resulted in sowing of all crops treated with Cruiser 350FS as being identified as low risk. Similar high quality seed treatment should be demonstrated for other formulations containing insecticides with high toxicity to bees. Data on dust drift from machinery and crops more representative of those in Brazil may allow further refinement of the default dust deposition value of 17% used in this study. Integr Environ Assess Manag 2023;19:1361-1373. © 2023 SETAC.

Baseline concentrations, source apportionment, and probabilistic risk assessment of heavy metals in urban street dust in Northeast Brazil.

Heavy metal pollution by accelerating urbanization is an emerging socio-environmental issue that poses a potential risk to human health and the environment. In this scenario, street dust is a primary source of contaminants. Here, the metal concentrations in street dust of one of the biggest Brazilian cities were assessed aiming to identify and quantify the sources of contamination. The metal bioaccessibility and estimated probabilistic (non)-carcinogenic risks to humans were also evaluated. Thirty-six dust samples were collected in the metropolitan region of Recife. Results showed that the traffic governed the distribution and accumulation of metals in street dust. Emissions from vehicles were the primary source (> 70 %) of heavy metals, except for Cd, which had a mixed origin (natural, traffic, and industrial). Moderate to heavy dust contamination by Ba, Cu, Mn, Pb, and Zn were found, with a very high potential ecological risk. The main exposure route depended on the metal. Barium, Cu, and Pb had ingestion rather than dermal contact as the main route of exposure, while inhalation and dermal contact posed the main risks to Mn and Cr, respectively. The risk for children was higher than for adults. The probabilities of unacceptable carcinogenic risk scenarios (TCRI >10-6) for children and adults were 27 and 4 %, respectively, with Cr being the most concerning metal for the health of the urban population.

Determination of settled dust sources by analytical techniques and chemical mass balance receptor model.

The identification of sources that produce particulate atmospheric matter (PM) can be of paramount importance for the reduction of air pollution and the development of environmental policies. In order to identify the environmental impact resulting from industrial metallurgical activities in the Metropolitan Region of Vitória, ES, Brazil, it was investigated the contribution to PM that result from industrial activities and from local natural sources. For this purpose, analytical techniques were used to identify the apportionment of sources that contribute to the formation of insoluble settled dust collected at two points near the city of Vitória. Samples of soil, iron ore, limestone, coal, iron ore pellets, sinter, coke, slag, environmental samples of settled dust, and samples representative of the actual flows of materials used in an integrated steel mill were analyzed. Physicochemical characterizations, based on X-ray diffraction and 57Fe Mössbauer spectroscopy of ferruginous compounds found in sources and receptor samples, revealed the presence of highly crystallized hematite and low crystallized hematite. The latter is primarily found in soil samples, while well-crystallized hematite is found in natural samples from iron ores or after thermo-chemical processes applied during the industrial transformation of raw materials, as it happens during the production of pellets. Ferrous crystallographic forms α-FeOOH and Fe5HO8·4H2O, observed in environmental and soil samples, were also found in samples from industrial sources. Source apportionment of carbon based on the IMPROVE_A protocol for thermal/optical carbon analysis showed the participation of the elementary carbon fractions, separating contributions originated from coke and coal sources in the environmental samples. These results allowed a significant reduction of collinearity between source profiles in the application of the chemical mass balance receptor model "EPA-CMB8.2" receptor model. Consequently, it was possible to distinguish sources that process mainly ferrous and carbonaceous materials, identifying the contribution of different sources to the settled dust collected.