Investigation of Eucalyptus camaldulensis and Tamarix aphylla species' capacities for methylene blue removal in wastewater and heavy metal remediation in soil.

In the contemporary landscape, the reuse of wastewater holds paramount significance. Concurrently, wastewater carries an array of pollutants encompassing chemical dyes and heavy metals. This study delves into the potential of Tamarix aphylla (TA) and Eucalyptus camaldulensis (EC) species for mitigating heavy metals in soil and eliminating methylene blue dye (MB) from wastewater. The research begins with assessing the dye adsorption process, considering pivotal factors such as initial pH, adsorbent dosage, initial dye concentration, and contact time. Outcomes reveal EC's superiority in dye removal compared to TA. As a bioremediation agent, EC exhibits a 90.46% removal efficacy for MB within 15 min, with pH 7.0 as the operative condition. Equilibrium analysis employs Temkin (T), Freundlich (F), and Langmuir (L) isotherms, revealing an excellent fit with the L isotherm model. The study delves further by probing surface adsorption kinetics through pseudo-first-order (PFO) and pseudo-second-order (PSO) models. Furthermore, to discern the divergent impacts of EC and TA on soil heavy metal reduction, soil samples were collected from three distinct zones: an untouched control area, alongside areas where EC and TA were cultivated at the Yazd wastewater site in Iran. Heavy metal levels in the soil were meticulously assessed through rigorous measurement and statistical scrutiny. The findings spotlight TA-cultivated soil as having the highest levels across all examined factors. Ultimately, EC emerges as the superior contender, proficiently excelling in both MB eliminations from wastewater and heavy metal amelioration in the soil, positioning it as the preferred phytoremediation agent.

Comparison of thermal, rheological properties of Finnish Pinus sp. and Brazilian Eucalyptus sp. black liquors and their impact on recovery units.

Black liquor (BL) is the major bioproduct and biomass fuel in pulp mill processes. However, the high viscosity of BL makes it a challenging material to work with, resulting in issues with evaporators and heat exchangers during its transport and processing. The thermal and rheological properties of BLs from Pinus sp. (PBL) and Eucalyptus sp. (EBL) were studied. FTIR spectra revealed the presence of the characteristic functional groups and the chemical composition in liquors. TGA/DTG curves showed three characteristic degradation stages related to evaporation of water, pyrolysis of organic groups, and condensation of char. Rheologically, liquors are classified as non-Newtonian and with comportment pseudoplastic. Their rheological dynamic shear properties included a linear viscoelastic region up to 1% shear strain, while frequency sweeps showed that storage modulus (G') > loss modulus (G''), thus confirming the solid-like behavior of both BLs. The rheological study demonstrated that increasing the temperature and oscillatory deformations of PBL and EBL decreased their degree of viscoelasticity, which could favor their pumping and handling within the pulp mill, as well as the droplet formation and swelling characteristics in the recovery furnace.

In-vitro cytotoxicity of biosynthesized nanoceria using Eucalyptus camaldulensis leaves extract against MCF-7 breast cancer cell line.

Cerium oxide nanoparticles possess unique properties that make them promising candidates in various fields, including cancer treatment. Among the proposed synthesis methods for CNPs, biosynthesis using natural extracts, offers an eco-friendly and convenient approach for producing CNPs, particularly for biomedical applications. In this study, a novel method of biosynthesis using the aqueous extract of Eucalyptus camaldulensis leaves was used to synthesize CNPs. Scanning electron microscopy and Transmission electron microscopy (TEM) techniques revealed that the synthesized CNPs exhibit a flower-like morphology. The particle size of CNPs obtained using Powder X-ray diffraction peaks and TEM as 13.43 and 39.25 nm. Energy-dispersive X-ray spectroscopy and Fourier transform infrared spectroscopy confirmed the effect of biomolecules during the synthesis process and the formation of CNPs. The cytotoxicity of biosynthesized samples was evaluated using the MTT method demonstrating the potential of these samples to inhibit MCF-7 cancerous cells. The viability of the MCF-7 cell line conducted by live/dead imaging assay confirmed the MTT cytotoxicity method and indicated their potential to inhibit cancerous cells. Furthermore, the successful uptake of CNPs by MCF-7 cancer cells, as demonstrated by confocal microscopy, provides evidence that the intracellular pathway contributes to the anticancer activity of the CNPs. In general, results indicate that the biosynthesized CNPs exhibit significant cytotoxicity against the MCF-7 cancerous cell line, attributed to their high surface area.

Comparative analysis of essential oil efficacy against the Asian longhorned tick Haemaphysalis longicornis (Acari: Ixodidae).

This study evaluated the potential repellent and acaricidal effects of 4 essential oils (clove, eucalyptus, lavender, and mint) against the Asian longhorned tick Haemaphysalis longicornis, a vector of various tick-borne diseases in medical and veterinary contexts. Selected for their potential repellent and acaricidal properties, the 4 essential oils were tested on adult and nymph H. longicornis ticks at different concentrations. The experiment assessed mortality rates and repellency, particularly during tick attachment to host skin. There was a significant increase (p<0.05) in tick mortality and repellency scores across all groups. At a 1% concentration, adult tick mortality ranged from 36% to 86%, while nymph mortality ranged from 6% to 97%. Clove oil exhibited notable efficacy, demonstrating high mortality rates of nymphs and adults. Clove oil also displayed strong repellency properties, with a repellency index of 0.05, surpassing those of mint, eucalyptus, and lavender oils. Clove oil showed the highest effectiveness in deterring nonattached adult ticks (90%) and nymphs (95%) when applied to skin. Clove oil was the most effective against adult and nymph ticks, achieving mortality rates of 86% and 97%, respectively, and led to the highest nonattachment rates when applied to skin. In conclusion, essential oils such as clove, eucalyptus, lavender, and mint oils present promising results for tick population control.

Exploring the bio-insecticidal activity of Eucalyptus globulus essential oil/ß-cyclodextrin inclusion complexes: In vitro and in silico assessment against Ephestia kuehniella larvae.

Owing to their beneficial functional capabilities, essential oils were largely used. However, their low aqueous solubility, instability, and high volatility urged scientists to their encapsulation with cyclodextrins (CDs) to tackle their shortcomings. In this study, the co-precipitation method was used to prepare ß-CD/Eucalyptus globulus essential oil (EGEO) inclusion complexes (ICs). ß-CD/EGEO ICs were prepared at ratios (w:w) 1:2 and 1:4 with an encapsulation efficiency of 93 and 96%, respectively. The ICs characterization using the Fourier transform Infrared spectroscopy, differential scanning calorimetry, X-ray powder diffraction, Dynamic Light Scattering, and Laser Doppler Velocimetry confirmed the formation of ß-CD/EGEO ICs. The insecticidal activity of the free EGEO and ICs was explored and displayed that the complex ß-CD/EGEO 1:4 had the highest activity with the lowest LC50 against Ephestia kuehniella larvae (5.03 ± 1.16 mg/g) when compared to the free oil (8.38 ± 1.95 mg/g). Molecular docking simulations stipulated that the compound α-Bisabolene epoxide had the best docking score (ΔG = -7.4 Kcal/mol) against the selected insecticidal target α-amylase. Additionally, toxicity evaluation of the studied essential oil suggested that it could be safely used as a potent bioinsecticide as compared to chemical insecticides. This study reveals that the formation of ß-CD/EGEO ICs enhanced the oil activity and stability and could be a promising and safe tool to boost its application in food or pharmaceutical fields.

Chemical compositions of Eucalyptus sp. Essential oils and the evaluation of their combinations as a promising treatment against ear bacterial infections.

BACKGROUND: The chemical composition and biological activities of Eucalyptus essential oils (EOs) have been documented in numerous studies against multiple infectious diseases. The antibacterial activity of individual Eucalyptus EOs against strains that cause ear infections was investigated in our previous study. The study's antibacterial activity was promising, which prompted us to explore this activity further with EO blends. METHODS: We tested 15 combinations (9 binary combinations and 6 combinations of binary combinations) of Eucalyptus EOs extracted by hydrodistillation from eight Tunisian Eucalyptus species dried leaves against six bacterial strains responsible for ear infections: three bacterial isolates (Haemophilus influenzae, Haemophilus parainfluenzae, and Klebsiella pneumoniae) and three reference bacteria strains (Pseudomonas aeruginosa, ATTC 9027; Staphylococcus aureus, ATCC 6538; and Escherichia coli, ATCC 8739). The EOs were analyzed using GC/FID and GC/MS. The major compounds, as well as all values obtained from the bacterial growth inhibition assay, were utilized for statistical analysis. RESULTS: The antibacterial activity of the EO blends exhibited significant variation within Eucalyptus species, bacterial strains, and the applied methods. Principal component analysis (PCA) and hierarchical cluster analysis (HCA), based on the diameters of the inhibition zone, facilitated the identification of two major groups and ten subgroups based on the level of antibacterial activity. The highest antibacterial activity was observed for the mixture of EOs extracted from E. panctata, E. accedens, and E. cladoclayx (paac) as well as E. panctata, E. wandoo, E. accedens, and E. cladoclayx (pwac) using the disc diffusion method. Additionally, significant activity was noted with EOs extracted from E. panctata, E. wandoo (pw) and E. panctata, E. accedens (pa) using the broth microdilution method. CONCLUSION: Our findings suggest that certain EO combinations (paac, pwac, pw, and pa) could be considered as potential alternative treatment for ear infections due to their demonstrated highly promising antibacterial activities.

Evaluating the reinforcing potential of enzymatic cellulose nanocrystals in polypropylene nanocomposite.

Cellulose nanocrystals (CNCs) produced through enzymatic hydrolysis exhibit physicochemical properties that make them attractive as eco-friendly reinforcing agents in polymer composites. However, the extent of their efficacy within a polymeric matrix is yet to be fully established. This study investigated the reinforcing capabilities of enzymatic CNC (approximately 3 nm in diameter) isolated from bleached eucalyptus Kraft pulp (BEKP), focusing on its application in polypropylene (PP) nanocomposites produced by injection molding. The study compared the performance of this enzymatic CNC (1-5 % wt) with PP composites reinforced with micro-sized cellulose fibers (BEKP at 10-30 % wt, approximately 13 µm) and additionally with commercial CNC produced by sulfuric acid hydrolysis. Despite enzymatic CNC experiencing agglomeration during spray-drying, leading to an average diameter increase to 3 µm, it still significantly increased the crystallization and glass transition temperature of the PP matrix. However, this agglomeration likely hindered the improvement of the mechanical properties within the nanocomposites. The results also showed that enzymatic CNC provided higher thermal stability at lower reinforcement levels compared to BEKP, but this came with a reduction in stiffness, posing a significant consideration in composite design. The addition of a coupling agent greatly enhanced the dispersion of reinforcements and the interfacial adhesion within the matrix, contributing to the enhanced performance of the composite properties. Additionally, enzymatic CNC demonstrated potential for superior reinforcement efficacy compared to commercially available CNC produced by sulfuric acid hydrolysis. In conclusion, enzymatic CNC exhibited a promising role as nano-reinforcement for thermoplastic polymer nanocomposites, exhibiting higher thermal properties at lower reinforcing loads than traditional micro-sized fiber reinforcements. The absence of sulfur, coupled with its higher thermal stability and sustainable potential, positions enzymatic CNC as a particularly favorable choice for applications involving direct contact with food, cosmetics, pharmaceuticals, and biomedical materials.

Co-production of fermentable sugars and highly active lignin from eucalyptus via a mild preprocessing with diethylene glycol and chromic chloride.

Eucalyptus was pretreated with diethylene glycol catalyzed by 0.02 mol/L CrCl3 for 10 min, resulting in 91 % delignification and 98 % cellulose recovery, with trace fermentation inhibitors generated. After the mild pretreatment, the accessibility and affinity of cellulase to eucalyptus was enhanced, especially since enzyme adsorption rate increased by 1.6-fold. Therefore, glucose yield of pretreated eucalyptus was 7.9-fold higher than that of untreated eucalyptus after hydrolyzed 48 h, in which the maximum glucose concentration reached 62 g/L from eucalyptus by adding Tween 80. According to the characterization analysis, the structure of the eucalyptus lignin-carbohydrate complexes structure was destroyed during the pretreatment, while lignin fragments was likely reacted with diethylene glycol to form the stabilized aromatic ethers. Moreover, the extracted Deg-lignin exhibited better performances than commercial alkali lignin such as higher fluorescence intensity, less negative surface charge, and lower particle size. The mild pretreatment method with diethylene glycol and CrCl3 provided a promising approach for co-production of fermentable sugars and high activity lignin from lignocellulosic biomass.

Effect of Eucalyptus globulus and Ferula assafoetida essential oils and their nanoformulations on the life table parameters of Tetranychus urticae (Acari: Tetranychidae).

One of the most damaging pests of agricultural crops across the globe is the two-spotted spider mite, Tetranychus urticae Koch. A wide variety of arthropods and plant pathogens can be controlled by essential oils, which are secondary metabolites produced by plants. It is possible to enhance the stability as well as the anti-pest efficiency of plant essential oils by encapsulation. Water distillation was used to extract the essential oils from Eucalyptus globulus and Ferula assafoetida. The chitosan nanoparticles were used to load both essential oils into nanoformulations. Studies were conducted on T. urticae life table characteristics under experimental circumstances to determine the sublethal impacts of essential oils and their nanoformulations. Intrinsic growth rate (r) for population exposed to E. globulus, F. assafoetida essential oils, their nanoformulations and the control were 0.1, 0.069, 0.051, 0.018 and 0.21 per day, respectively. F. assafoetida and E. globulus nanoformulations resulted the lowest fecundity compared to the other treatments. According the result of the lethal and sublethal effects of purified essential oils and nanoformulations of F. assafoetida and E. globulus, they would be recommended for controlling the two-spotted spider mites, T. urticae.

Study on the mechanism of lignin non-productive adsorption on cellobiohydrolase.

Enzymatic hydrolysis is important for lignocellulosic biomass conversion into fermentable sugars. However, the nonproductive adsorption of enzyme on lignin was major hinderance for the enzymatic hydrolysis efficiency. In this study, non-productive adsorption mechanism of cellulase component cellobiohydrolase (CBH) onto lignin was specific investigated. Research revealed that the adsorption behavior of CBH on eucalyptus alkali lignin (EuA) was affected by reaction conditions. As study on the adsorption kinetic, it was indicated that the adsorption cellulose binding domain (CBD) of CBH onto EuA well fitted with Langmuir adsorption model and pseudo second-order adsorption kinetics model. And the tyrosine site related to the adsorption of CBD onto lignin was proved by the fluorescence and UV spectra analysis. The results of this work provide a theoretical guidance to understanding the nonproductive adsorption mechanism and building method to reduce the adsorption of cellulase on the lignin.

Impact of accelerated aging cycles on the performance of extruded cement-based composites reinforced with non-bleached eucalyptus fibers.

Thermo-mechanical pulping produces well-individualized fibers compared to wood particles and less fragile fibers compared to Kraft pulping, besides presenting higher volume, higher yield, and lower production cost, which can be an exciting alternative for the fiber-cement industries. This study evaluated the impact of soak and dry-aging cycles on the performance of extruded composites reinforced with non-bleached eucalyptus fibers. The cement matrix comprised cement (70%) and limestone (30%). Composites were reinforced with 1 to 5% of eucalyptus fiber by cement mass and tested on the 28th day of cure at 99% relative humidity and after 400 accelerated aging cycles. The water absorption and apparent porosity gradually increased with the reinforcement level. Composites with 4 and 5% fibers showed the highest toughness (0.21 and 0.23 kJ/m2, respectively). The aging by 400 soak-dry cycles reduced the composites' water absorption and apparent porosity. The modulus of elasticity (MOE), rupture (MOR), and toughness increased, except for toughness for composites reinforced with 1 and 5% fibers, explained by the cementitious matrix's continuous hydration, fiber mineralization, and natural carbonation. In general, eucalyptus thermo-mechanical fibers were suitable for producing cementitious composites. Cementitious composites with 3% fibers presented a higher MOR, MOE, low water absorption, and apparent porosity after 400 accelerated aging cycles. In addition, the composites with 4% fibers also presented remarkable improvements in these properties. The aging cycles did not result in composites with less resistance, a positive fact for their application as tiles and materials for external use in civil construction.

Eucalyptus Essential Oil Based Nanoemulsions: Preparation and Biological Activities.

Eucalyptus essential oil has remarkable industrial importance and biological properties due to its effectiveness against various diseases, reported throughout human history. Despite the extraordinary bioactivities of essential oil, its applications are limited due to volatility, insolubility in water, and less stability. Formulation of nanoemulsion is the best way to enhance the bio-efficacy of this essential oil and eliminate the factors responsible for limited application. This review article compiles the information regarding formulation of Eucalyptus essential oil-based nanoemulsion and their several biological activities and medicinal properties including antibacterial, antifungal, larvicidal, insecticidal, and cytotoxic activities etc. The bio-efficacy of essential oil-based nanoemulsion has also been found to be enhanced as compared utilization of essential oil alone. This review can be beneficial for researchers working on medicinal plant-based natural products, specifically containing Eucalyptus essential oil, to explore new research horizons in this emerging field.

Eucalyptus Oils Phytochemical Composition in Correlation with Their Newly Explored Anti-SARS-CoV-2 Potential: in Vitro and in Silico Approaches.

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is the latest arisen contagious respiratory pathogen related to the global outbreak of atypical pneumonia pandemic (COVID-19). The essential oils (EOs) of Eucalyptus camaldulensis, E. ficifolia F. Muell., E. citriodora Hook, E. globulus Labill, E. sideroxylon Cunn. ex Woolls, and E. torquata Luehm. were investigated for its antiviral activity against SARS-CoV-2. The EOs phytochemical composition was determined using GC/MS analysis. Correlation with the explored antiviral activity was also studied using multi-variate data analysis and Pearson's correlation. The antiviral MTT and cytopathic effect inhibition assays revealed very potent and promising anti SARS-CoV-2 potential for E. citriodora EO (IC50 = 0.00019 µg/mL and SI = 26.27). The multivariate analysis revealed α-pinene, α-terpinyl acetate, globulol, γ -terpinene, and pinocarvone were the main biomarkers for E. citriodora oil. Pearson's correlation revealed that globulol is the top positively correlated compound in E. citriodora oil to its newly explored potent anti SARS-CoV-2 potential. A molecular simulation was performed on globulol via docking in the main active sites of both SARS-CoV-2 viral main protease (Mpro) and spike protein (S). In silico predictive ADMET study was also developed to investigate the pharmacokinetic profile and predict globulol toxicity. The obtained in silico, in vitro and Pearson's correlation results were aligned showing promising SARS-CoV-2 inhibitory activity of E. citriodora and globulol. This study is a first record for E. citriodora EO as a novel lead exhibiting potent in vitro, and in silico anti SARS-CoV-2 potential and suggesting its component globulol as a promising candidate for further extensive in silico, in vitro and in vivo anti-COVID studies.

Removal of dyes from wastewater using Eucalyptus wood fiber loaded nanoscale zero-valent iron: Characterization and removal mechanism.

Wood fiber as a natural and renewable material has low cost and plenty of functional groups, which owns the ability to adsorb dyes. In order to improve the application performance of wood fiber in dye-pollution wastewater, Eucalyptus wood fiber loaded nanoscale zero-valent iron (EWF-nZVI) was developed to give EWF magnetism and the ability to degrade dyes. EWF-nZVI was characterized via FTIR, XRD, zeta potential, VSM, SEM-EDS and XPS. Results showed that EWF-nZVI owned a strong magnetism of 96.51 emu/g. The dye removal process of EWF-nZVI was more in line with the pseudo-second-order kinetics model. In addition, the Langmuir isotherm model fitting results showed that the maximum removal capacities of Congo red and Rhodamine B by EWF-nZVI were 714.29 mg/g and 68.49 mg/g at 328 K, respectively. After five adsorption-desorption cycles, the regeneration efficiencies of Congo red and Rhodamine B were 74 % and 42 % in turn. The dye removal mechanisms of EWF-nZVI included redox degradation (Congo red and Rhodamine B) and electrostatic adsorption (Congo red). In summary, EWF-nZVI is a promising biomass-based material with high dye removal capacities. This work is beneficial to promote the large-scale application of wood fiber in water treatment.

Fabrication of biodegradable and antibacterial films of chitosan/polyvinylpyrrolidone containing Eucalyptus citriodora extracts.

The main objective of this work is to develop biodegradable active films through the combination of the extracts with different solvents sourced from Eucalyptus citriodora leaves, with films made of chitosan (Cs) and polyvinylpyrrolidone (PVP). Chromatographic profiling investigations were carried out to examine the antibacterial characteristics of E. citriodora extracts before their direct incorporation into the polymer films. At this point, the potent antimicrobial properties of the phenol compounds and bioactive components demonstrated an antibacterial activity that was particularly noticeable at a hexane resolution. Different morphological characteristics were seen on films made from these solvent extracts, such as Cs/PVP-AE, Cs/PVP-EAE, and Cs/PVP-HE, when scanning electron microscopy was used. Numerous other outcomes of all the interactions between the extract particles and the film were shown by the pores defined by the Cs/PVP film's porous nature. The addition of the extracts, either alone or in combination, greatly enhanced the Cs/NC/PVP films' mechanical characteristics. It has also been shown that adding plant extracts greatly increased the antibacterial activity of these films. These findings reveal that Cs/PVP films loaded with extract may be utilized as more environmentally acceptable substitutes for possible food packaging application by increasing shelf life of food products.

Formyl phloroglucinol meroterpenoids from the leaves of Eucalyptus globulus subsp. maidenii and their ATP-citrate lyase inhibitory activities.

Three new formyl phloroglucinol meroterpenoids, eumaidials A-C (1-3), were isolated from the leaves of Eucalyptus globulus subsp. maidenii, along with ten known analogues (4-13). Their chemical structures were determined by various spectral data and electronic circular dichroism calculations. Eumaidial A (1) is the first ß-caryophyllene-based formyl phloroglucinol meroterpenoids from the genus Eucalyptus. Compounds 1-4 and 10 exhibited ATP-citrate lyase inhibitory activities, and compounds 2 and 3 suppressed the hepatocyte lipogenesis.

Potential of NIR spectroscopy for predicting cellulose nanofibril quality in commercial bleached Kraft pulp of Eucalyptus.

Multivariate models were developed to classify cellulose nanofibril (CNF) fibrillation by a quality index from near infrared (NIR) spectra. Commercial pulps of Eucalyptus spp. were used to produce cellulose nanofibrils by means of a fibrillator mill. After each of the five passes through the mill, samples were collected and analyzed for energy consumption and fiber classification. As a standard, pulps were oxidized with TEMPO reagent followed by a single pass through the mill to compare the resulting quality of CNFs produced by each method. NIR spectra of CNFs were associated with quality indices determined by conventional laboratory analyses that included morphology, turbidity, mechanical properties, X-ray diffraction and quality index measurements. Principal component analysis (PCA) and partial least squares discriminant analysis (PLS-DA) were applied to the spectral and experimental data. Fibrillator milling to obtain CNFs was efficient and resulted in gel formation following the third pass through the mill. NIR spectroscopy combined with PLS-DA was used successfully to create a model to classify quality of CNFs with 96 % certainty in 3 wt% solutions. These findings suggest that NIR spectroscopy holds promise for estimating CNF quality in suspension, particularly in real-time industrial applications where reliable estimates are crucial.

Chemical Composition, Antibacterial Properties, and Anti-Enzymatic Effects of Eucalyptus Essential Oils Sourced from Tunisia.

This study was conducted to examine the chemical composition of the essential oils (EOs) from six Tunisian Eucalyptus species and to evaluate their anti-enzymatic and antibiofilm activities. The EOs were obtained through hydro-distillation of dried leaves and subsequently analyzed using GC/MS. The main class of compounds was constituted by oxygenated monoterpenes, particularly prominent in E. brevifolia (75.7%), E. lehmannii (72.8%), and E. woollsiana (67%). Anti-enzymatic activities against cholinesterases, α-amylase, and α-glucosidase were evaluated using spectrophotometric methods. Notably, the E. brevifolia, E. extensa, E. leptophylla, E. patellaris, and E. woollsiana EOs displayed potent acetylcholinesterase (AChE) inhibition (IC50: 0.25-0.60 mg/mL), with E. lehmannii exhibiting lower activity (IC50: 1.2 mg/mL). E. leptophylla and E. brevifolia showed remarkable α-amylase inhibition (IC50: 0.88 mg/mL), while E. brevifolia and E. leptophylla significantly hindered α-glucosidase (IC50 < 30 mg/mL), distinguishing them from other EOs with limited effects. Additionally, the EOs were assessed for their anti-biofilm properties of Gram-positive (Staphylococcus aureus and Listeria monocytogenes) and Gram-negative (Acinetobacter baumannii, Pseudomonas aeruginosa and Escherichia coli) bacterial strains. The E. extensa EO demonstrated the main antibiofilm effect against E. coli and L. monocytogenes with an inhibition > 80% at 10 mg/mL. These findings could represent a basis for possible further use of Eucalyptus EOs in the treatment of human microbial infections and/or as a coadjutant in preventing and treating Alzheimer's disease and/or diabetes mellitus.

Economic potential of essential oil production from New Zealand-grown Eucalyptus bosistoana.

Farm foresters and other growers are establishing a ground-durable hardwood resource, including the emerging plantation species Eucalyptus bosistoana in New Zealand. The foliage of this species contains essential oils in quantity and quality suitable for commercial extraction. Essential oil production could improve the economic viability of E. bosistoana plantations, diversifying the grower's income and providing an early revenue stream. This study assessed the economic potential for essential oil production from New Zealand grown E. bosistoana plantations. A sensitivity analysis indicated that uncertainty of leaf biomass availability, genetic as well as seasonal changes in oil content, and fluctuations in essential oil price are equally important on the viability of an essential oil operation. Small-scale essential oil production could be sustainably supplied with foliage from thinning and pruning operations sourced from the envisaged regional planting programmes and commence in 3-5 years. A large-scale operation could be supplied when trees will be harvested. Lastly, based on the operational costs of a domestic small-scale essential oil producer, oil value from E. bosistoana would exceed the cost of production.

Camaldulensals A-C, the First Meroterpenoids Possessing Two Spatially Separated Formyl Phloroglucinols Conjugated to a Terpene Core from the Leaves of Eucalyptus camaldulensis Dehnh.

Three new bis-formyl phloroglucinol-meroterpenoids (1-3), three new euglobal type formyl phloroglucinol-meroterpenoids (4-6), and one new dimeric formyl phloroglucinol (7) were isolated from the leaves of Eucalyptus camaldulensis. Camaldulensal A (1) is the first bis-isovaleryl-formyl-phloroglucinol-sesquiterpenoid. It features a novel 6/6/10/3/6/6 fused ring system and contains six stereogenic centers. Camaldulensals B (2) and C (3) are the first bis-isovaleryl-formyl-phloroglucinols, each conjugated to a monoterpene. Formyl phloroglucinol compounds (FPCs) containing two spatially separated formyl phloroglucinols conjugated to a terpene core such as 1-3 have not been reported previously. The structures of these compounds were elucidated by spectroscopic methods and computational analysis. Camaldulensals B (2) and C (3) exhibited significant antibacterial activity against methicillin-susceptible and methicillin-resistant Staphylococcus aureus. Structure activity relationships are discussed in relation to previously reported antibacterial activities of other molecules from the FPC structure class.