CT of Periarticular Adult Knee Fractures: Classification and Management Implications.

Periarticular knee fractures, which include fractures of the distal femur, tibial plateau, and patella, account for 5%-10% of musculoskeletal injuries encountered in trauma centers and emergency rooms. These injuries are frequently complex, with articular surface involvement. Surgical principles center on reconstruction of the articular surface as well as restoration of limb length, alignment, and rotation to reestablish functional knee biomechanics. Fixation principles are guided by fracture morphology, and thus, CT with multiplanar reformats and volume rendering is routinely used to help plan surgical intervention. Fractures involving the distal femur, tibial plateau, and patella have distinct management considerations. This comprehensive CT primer of periarticular knee fractures promotes succinct and clinically relevant reporting as well as optimized communication with orthopedic trauma surgeon colleagues by tying fracture type and key CT findings with surgical decision making. Fracture patterns are presented within commonly employed fracture classification systems, rooted in specific biomechanical principles. Fracture typing of distal femur fractures and patellar fractures is performed using Arbeitsgemeinschaft für Osteosynthesefragen/Orthopedic Trauma Association (AO/OTA) classification schemes. Tibial plateau fractures are graded using the Schatzker system, informed by a newer explicitly CT-based three-column concept. For each anatomic region, the fracture pattern helps determine the surgical access required, whether bone grafting is warranted, and the choice of hardware that achieves suitable functional outcomes while minimizing the risk of articular collapse and accelerated osteoarthritis. Emphasis is also placed on recognizing bony avulsive patterns that suggest ligament injury to help guide stress testing in the early acute period. ©RSNA, 2024 Supplemental material is available for this article.

Lower Extremity Amputation in Fracture-Related Infection.

OBJECTIVES: To analyze demographics, comorbidities, fracture characteristics, presenting characteristics, microbiology, and treatment course of patients with fracture-related infections (FRIs) to determine risk factors leading to amputation. DESIGN: Retrospective cohort. SETTING: Single Level I Trauma Center (2013-2020). PATIENT SELECTION CRITERIA: Adults with lower extremity (femur and tibia) FRIs were identified through a review of an institutional database. Inclusion criteria were operatively managed fracture of the femur or tibia with an FRI and adequate documentation present in the electronic medical record. This included patients whose primary injury was managed at this institution and who were referred to this institution after the onset of FRI as long as all characteristics and risk factors assessed in the analysis were documented. Exclusion criteria were infected chronic osteomyelitis from a non-fracture-related pathology and a follow-up of less than 6 months. OUTCOME MEASURES AND COMPARISONS: Risk factors (demographics, comorbidities, and surgical, injury, and perioperative characteristics) leading to amputation in patients with FRIs were evaluated. RESULTS: A total of 196 patients were included in this study. The average age of the study group was 44±16 years. Most patients were men (63%) and White (71%). The overall amputation rate was 9.2%. There were significantly higher rates of chronic kidney disease (CKD; P = 0.039), open fractures (P = 0.034), transfusion required during open reduction internal fixation (P = 0.033), Gram-negative infections (P = 0.048), and FRI-related operations (P = 0.001) in the amputation cohort. On multivariate, patients with CKD were 28.8 times more likely to undergo amputation (aOR = 28.8 [2.27 to 366, P = 0.010). A subanalysis of 79 patients with either a methicillin-sensitive Staphylococcus aureus or methicillin-resistant S. aureus (MRSA) infection showed that patients with MRSA were significantly more likely to undergo amputation compared with patients with methicillin-sensitive Staphylococcus aureus (P = 0.031). MRSA was present in all cases of amputation in the Staphylococcal subanalysis. CONCLUSIONS: Findings from this study highlight CKD as a risk factor of amputation in the tibia and femur with fracture-related infection. In addition, MRSA was present in all cases of Staphylococcal amputation. Identifying patients and infection patterns that carry a higher risk of amputation can assist surgeons in minimizing the burden on these individuals. LEVEL OF EVIDENCE: Prognostic Level III. See Instructions for Authors for a complete description of levels of evidence.

Impact of Prophylactic Cerclage Location on Femoral Fracture Propagation: A Biomechanical Study.

OBJECTIVES: Prophylactic cerclage cables are often placed intraoperatively about a fracture to prevent propagation. However, biomechanical data supporting optimal cable placement location are lacking. The objective of this study was to evaluate the impact of prophylactic cerclage placement location on the propagation of femoral shaft fractures. METHODS: The diaphysis of 14 fresh-frozen cadaveric femora were included. Volumetric bone mineral density in the femoral shaft was obtained from quantitative computed tomography scans. For each specimen, a 5-mm longitudinal fracture was created proximally to simulate a pre-existing fracture. After reaming of the femoral canal, a 3 degrees tapered wedge was advanced with an MTS machine at 0.2 mm/s until failure. The tests were conducted with a CoCr cable placed at varying distances (5 mm, 10 mm, 15 mm, 20 mm, and cableless) from the distal tip of the initial fracture. A compression loadcell was used to measure the cable tension during the tests. The axial force, displacement, and cable tension were monitored for comparison between groups. RESULTS: In the cableless group, the mean force needed to propagate the fracture was 1017.8 ± 450.3 N. With the addition of a cable at 5 mm below the fracture, the failure force nearly doubled to 1970.4 ± 801.1 N (P < 0.001). This also led to significant increases in stiffness (P = 0.006) and total work (P = 0.001) when compared with the control group. By contrast, in the 15 and 20 mm groups, there were no significant changes in the failure force, stiffness, and total work as compared with the control group (P > 0.05). CONCLUSIONS: Propagation of femoral shaft fracture was effectively resisted when a prophylactic cable was placed within 5 mm from the initial fracture, whereas cables placed more than 10 mm below the initial fracture were not effective in preventing fracture propagation.

Biomechanical comparison of an intramedullary nail combined with a reconstruction plate combination versus a single intramedullary nail in unstable intertrochanteric fractures with lateral femoral wall fracture: A finite element analysis.

This study aimed to compare the biomechanical performance of an intramedullary nail combined with a reconstruction plate and a single intramedullary nail in the treatment of unstable intertrochanteric femoral fractures with a fracture of the lateral femoral wall (LFW). A three-dimensional finite element (FE) femur model was established from computed tomography images of a healthy male volunteer. A major reverse obliquity fracture line, associated with a lesser trochanteric fragment defect and a free bone fragment of the LFW, was developed to create an AO/OTA type 31-A3.3 unstable intertrochanteric fracture mode. Two fixation styles were simulated: a long InterTAN nail (ITN) with or without a reconstruction plate (RP). A vertical load of 2100 N was applied to the femoral head to simulate normal walking. The construct stiffness, von Mises stress, and model displacement were assessed. The ITN with RP fixation (ITN/RP) provided higher axial stiffness (804 N/mm) than the ITN construct (621 N/mm). The construct stiffness of ITN/RP fixation was 29% higher than that of ITN fixation. The peak von Mises stress of the implants in the ITN/RP and ITN models was 994.46 MPa and 1235.24 MPa, respectively. The peak stress of the implants in the ITN/RP model decreased by 24% compared to that of the ITN model. The peak von Mises stress of the femur in the ITN/RP model was 269.06 MPa, which was lower than that of the ITN model (331.37 MPa). The peak stress of the femur in the ITN/RP model was 23% lower than that of the ITN model. The maximum displacements of the ITN/RP and ITN models were 12.12 mm and 13.53 mm, respectively. The maximum displacement of the ITN/RP model decreased by 12% compared with that of the ITN model. The study suggested that an additional plate fixation could increase the construct stiffness, reduce the stresses in the implant and femur, and decrease displacement after intramedullary nailing. Therefore, the intramedullary nail and reconstruction plate combination may provide biomechanical advantages over the single intramedullary nail in unstable intertrochanteric fractures with a fractured LFW.

A case series utilizing bone marrow aspirate concentrate, cancellous bone autograft, platelet-rich plasma and autologous fibrin for the treatment of femur nonunions.

Aim: To assess the efficacy of a bioregenerative scaffold derived from bone marrow aspirate, cancellous bone autograft, platelet-rich plasma and autologous fibrin in treating supracondylar femur nonunions. Methods & materials: Three patients with nonunions following multiple surgical failures underwent bone stabilization and the application of a novel bioregenerative scaffold. x-rays and subjective scales were collected before surgery and at 6, 12 and 24 months post-surgery. Results: All nonunions exhibited healing with sufficient callus formation, as confirmed radiologically. After 6 months, all patients resumed full weight-bearing walking without pain. Statistical analysis showed improvements in all scales compared with pre-surgical values. Conclusion: This method presents itself as an option for treating supracondylar femur nonunions following multiple surgical failures.

What is this summary about? The objective of this case series study was to evaluate the effectiveness of a new biological autologous scaffold, comprised of stem and blood cells along with blood derivatives, in treating challenging cases of supracondylar femur nonunions.What were the results? Three participants underwent the application of this surgical method and were monitored for a period of 2 years. The therapy was well tolerated and deemed safe. Notably, all three patients experienced significant reductions in pain and improvements in functionality. Within a few months, they were able to walk with full weightbearing without pain, and clear indications of progressing toward bone union were evident by the 6 months.What do the results mean? This study demonstrates that the surgical application of autologous blood, cancellous bone and bone marrow, following the described concept and method, is an effective, safe and enduring treatment for femur nonunions. It markedly diminishes pain, enhances leg function and yields statistically significant improvements in quality of life.

Ultrasound-guided techniques for managing length- unstable femoral shaft fractures in children.

OBJECTIVE: The management of length-unstable femoral shaft fractures(LUFSFs) in pediatric patients is still controversial. This study aims to explore the clinical efficacy of ultrasound-guided closed reduction combined with external fixation for treating LUFSFs in children. METHODS: We conducted a retrospective analysis of clinical data from 19 pediatric patients with LUFSFs who underwent ultrasound-guided closed reduction and external fixation between January 2018 and January 2023. Ultrasound was employed not only to facilitate closed reduction of the fracture but also to guide real-time insertion of Schanz pins and monitor pin length as it traversed the opposite cortex. Surgical time, intraoperative fluoroscopy count, hospital stay length, fracture fixation duration, complication incidence, fracture reduction quality at the final follow-up were recorded. RESULTS: The patients' average age was 7.5 years( range: 5 to 11 years). The mean surgical duration was 70.4 min (range: 48-105 min), and the average intraoperative fluoroscopy count was 6.5 (range: 2-16). Fracture fixation lasted an average of 10.9 weeks (range: 7-20 weeks). All patients were followed up for more than one year. 6 cases of superficial pin tract infection occurred, which resolved with oral antibiotics and enhanced needle tract care. No deep infections were observed. Temporary stiffness of the knee joint was observed in 2 patients. According to Flynn's efficacy evaluation system, fracture reduction quality at the final follow-up was rated as excellent in 11 cases and satisfactory in 8 cases, yielding a combined success rate of 100% (19/19). CONCLUSIONS: The technique of ultrasound-guided closed reduction combined with external fixation offers favorable outcomes for children aged 5 to 11 years with LUFSFs, reducing reliance on fluoroscopic guidance.

Periprosthetic Femoral Fractures-Beyond B2.

The proliferation of hip arthroplasty has seen concomitant increases in periprosthetic femoral fractures (PFFs). The most common pattern involves fracture at the level of a loose prosthesis (B2). B2 PFFs have a unique mechanopathogenesis linked to the tendency of polished taper-slip cemented stems to subside in the cement. Such stems carry a much higher PFF risk than other cemented designs. Mega-data, consistent across national registries, suggest that increasing application of the taper-slip principle has resulted in the emergence of highly polished, very low friction cemented prostheses. These have the propensity to migrate within the cement, increasing B2 PFF risk. This would explain the strong association between cobalt-chromium stems and PFF. Is PFF the mode of failure of polished taper-slip stems rather than aseptic loosening? Established wisdom teaches that B2 PFFs should be managed with revision surgery. There is a large body of new evidence that, in certain instances, fixation results in outcomes at least equivalent to revision arthroplasty, with shorter surgical time, decreased transfusion requirements, and lower dislocation risk. This is so in B2 PFFs around cemented polished taper-slip stems with an intact bone-cement interface. We outline advances in understanding of B2 PFF with special reference to mechanopathogenesis and indications for fixation.

Analysis of the influence of circumference and displacement of the third fracture fragment on the healing of femoral shaft fractures treated with intramedullary nailing.

The effect of circumference and displacement of the third fracture fragment on fracture healing after intramedullary nailing of femoral shaft fractures with a third fracture fragment was investigated. A retrospective cohort study was conducted to analyze the data of 142 patients who suffered femoral shaft fractures with a third fracture fragment and were admitted to the First People's Hospital of Lianyungang from February 2016 to December 2021. According to the circumference of the third fracture fragments, these were divided into three types of type 1: 71 cases; type 2: 52 cases; and type 3: 19 cases. On the basis of the diaphyseal diameter, the degree of displacement of the third fracture fragment was classified into three degrees of degree I: 95 cases; degree II: 31 cases; and degree III: 16 cases. Postoperative follow-up was performed to compare the fracture healing rate, healing time, and the modified Radiographic Union Scale for Tibia (mRUST) at 9th month after surgery in each group. All 142 patients were followed up after operation, with an average of (14.7 ± 4.1) months, and the overall healing rate was 73.4%. When the third fracture fragments were displaced in degree II and III, the mRUST score at 9th month in the type 1 group was higher than that in the type 2 and 3 groups (P = 0.017). Logistic regression analysis showed that greater displacement of third fracture fragments and greater circumference were associated with lower fracture healing rates (P < 0.05). After intramedullary nailing of femoral fractures, the degree of third fragment displacement and circumference affect fracture healing, and the former has a greater impact. When the third fracture fragment is displaced to degree II or III and its circumference is type 2 or type 3, it significantly affects the fracture healing. Intraoperative intervention to reduce the distance of third displacement of the fragment is required to reduce the incidence of non-union.

Does the Nonunion Rate of Atypical Femoral Fractures Differ According to Fracture Site?: A Meta-Analysis.

Background: The nonunion rate for atypical femoral fractures (AFF) is known to be higher than that for typical fractures of the femur. We performed a meta-analysis to determine the incidence of nonunion necessitating reoperation following fixation for AFF and compare the rates according to the fracture site (subtrochanter or midshaft). Methods: A total of 742 AFFs from 29 studies were included. A proportion meta-analysis utilizing a random-effects model was conducted to estimate the prevalence of nonunion. The outcomes were the incidence of reoperations that included osteosynthesis. To determine the association of nonunion with patient mean age or average duration of bisphosphonate use, meta-regression analysis was done. Results: In proportion meta-analysis, the estimated pooled prevalence of nonunion was 7% (95% confidence interval [CI], 5%-10%) from all studies. There was a significant difference in nonunion rate between the 2 groups (I2 = 34.4%, p = 0.02); the estimated prevalence of nonunion was 15% (95% CI, 10%-20%) in subtrochanteric AFFs and 4% (95% CI, 2%-6%) in midshaft AFFs. From meta-regression analysis, significant correlations were identified between nonunion rate and patient mean age (coefficient: -0.0071, p = 0.010), but not in the average duration of bisphosphonate use (coefficient: -0.0024, p = 0.744). Conclusions: A notable disparity existed in the nonunion rate among subtrochanteric AFFs and midshaft AFFs group. Therefore, it is critical for orthopedic surgeons to consider the complexity and challenges associated with AFF and to estimate the proper possibility of nonunion according to the fracture site.

Combined Irreducible Femoral Head Fracture-Dislocation and Ipsilateral Segmental Femur Fracture: A Case Report.

CASE: A 48-year-old man presented to a Level 1 trauma center after a motor vehicle crash with a right irreducible posterior hip dislocation and ipsilateral fractures of the femoral head and segmental femur shaft. This injury was managed with open reduction and internal fixation and antegrade intramedullary nailing. CONCLUSION: This is the first report of a combined irreducible femoral head fracture-dislocation and a segmental femur fracture, a rare injury that requires a stepwise approach to operative management of each injury. Surgeons must recognize the clinical and radiographic findings associated with irreducible hip dislocations in the setting of ipsilateral fractures to the femoral head and shaft.

EFFECT OF A TRAINING PROGRAM ON REDUCING HEALTH COMPLICATIONS AFTER OPERATIONS OF PROXIMAL FEMORAL NAILING TECHNIQUE.

The proximal femoral fracture patients in particular fractures in the trochanteric region of the femur could have treatment under the title proximal femoral nailing (PFN)-this operation is a less invasive type. The proximal femoral nail, an osteosynthetic implant, has been investigated to produce positive heeling to ensure a better fixation, several advantages of PFN include such as bleeding time during operation which leads to the need to perform reaming on the femoral canal during surgery. MATERIAL AND METHODS: The study was carried out at three teaching Hospitals in Mosul City from the period of January 2022 to December 2022, fourteen nurses from orthopaedic wards were subjected to this study, all the nurses were evaluated by the checklist, and they attended the training program which was taken from the Iraqi Ministry of Health guide for organizing nursing operations and practices inside the hospitals and medical departments. RESULTS AND DISCUSSION: More than (50%) of the study sample had a poor score in the initial evaluation for post-operative steps and after submitting the training program, the performance and practices of the nursing staff have improved significantly where the poor score decreased to approximately (25%) at P value (0.0001). CONCLUSION: The study concluded that there is a significant and clear weakness in the performance and practices of the nursing staff towards patients with upper femoral fractures in the fracture wards and that the training program that was given to them improved their performance and practices significantly and effectively.

The classification algorithms to support the management of the patient with femur fracture.

Effectiveness in health care is a specific characteristic of each intervention and outcome evaluated. Especially with regard to surgical interventions, organization, structure and processes play a key role in determining this parameter. In addition, health care services by definition operate in a context of limited resources, so rationalization of service organization becomes the primary goal for health care management. This aspect becomes even more relevant for those surgical services for which there are high volumes. Therefore, in order to support and optimize the management of patients undergoing surgical procedures, the data analysis could play a significant role. To this end, in this study used different classification algorithms for characterizing the process of patients undergoing surgery for a femoral neck fracture. The models showed significant accuracy with values of 81%, and parameters such as Anaemia and Gender proved to be determined risk factors for the patient's length of stay. The predictive power of the implemented model is assessed and discussed in view of its capability to support the management and optimisation of the hospitalisation process for femoral neck fracture, and is compared with different model in order to identify the most promising algorithms. In the end, the support of artificial intelligence algorithms laying the basis for building more accurate decision-support tools for healthcare practitioners.

Management of infected bone defects of the femoral shaft by Masquelet technique: sequential internal fixation and nail with plate augmentation.

BACKGROUND: To evaluate the effectiveness of a sequential internal fixation strategy and intramedullary nailing with plate augmentation (IMN/PA) for bone reconstruction in the management of infected femoral shaft defects using the Masquelet technique. METHODS: We performed a retrospective descriptive cohort study of 21 patients (mean age, 36.4 years) with infected bone defects of the femoral shaft treated by the Masquelet technique with a minimum follow-up of 18 months after second stage. After aggressive debridement, temporary stabilisation (T1) was achieved by an antibiotic-loaded bone cement spacer and internal fixation with a bone cement-coated locking plate. At second stage (T2), the spacer and the locking plate were removed following re-debridement, and IMN/PA was used as definitive fixation together with bone grafting. We evaluated the following clinical outcomes: infection recurrence, bone union time, complications, and the affected limb's knee joint function. RESULTS: The median and quartiles of bone defect length was 7 (4.75-9.5) cm. Four patients required iterative debridement for infection recurrence after T1. The median of interval between T1 and T2 was 10 (9-19) weeks. At a median follow-up of 22 (20-27.5) months, none of the patients experienced recurrence of infection. Bone union was achieved at 7 (6-8.5) months in all patients, with one patient experiencing delayed union at the distal end of bone defect due to screws loosening. At the last follow-up, the median of flexion ROM of the knee joint was 120 (105-120.0)°. CONCLUSIONS: For infected femoral shaft bone defects treated by the Masquelet technique, sequential internal fixation and IMN/PA for the reconstruction can provide excellent mechanical stability, which is beneficial for early functional exercise and bone union, and does not increase the rate of infection recurrence.

Comparative outcomes of uncemented and cemented stem revision in managing periprosthetic femoral fractures: a retrospective cohort study.

INTRODUCTION: Periprosthetic femoral fractures (PFFs) following hip arthroplasty, especially Vancouver B2 and B3 fractures, present a challenge due to the association with a loose femoral stem, necessitating either open reduction and internal fixation or stem revision. This study aims to compare outcomes between uncemented and cemented stem revisions in managing Vancouver B2 and B3 fractures, considering factors such as hip-related complications, reoperations, and clinical outcome. METHODS: A retrospective cohort study was conducted at Danderyd Hospital, Sweden, from 2008 to 2022, encompassing operatively treated Vancouver B2 and B3 fractures. Patients were categorized into uncemented and cemented stem revision groups, with data collected on complications, revision surgeries, fracture healing times, and clinical outcomes. RESULTS: A total of 241 patients were identified. Significant differences were observed between the two groups in patient demographics, with the cemented group comprising older patients and more females. Follow up ranged from 1 to 15 years. Average follow up time was 3.9 years for the cemented group and 5.5 years for the uncemented group. The cemented stems demonstrated lower rates of dislocation (8.9% versus 22.5%, P = 0.004) and stem loosening (0.6% versus 9.3%, P = 0.004) than the uncemented method. Moreover, the cemented group exhibited shorter fracture healing times (11.4 weeks versus 16.7 weeks, P = 0.034). There was no difference in clinical outcome between groups. Mortality was higher in the cemented group. CONCLUSIONS: This retrospective study indicates that cemented stem revision for Vancouver B2-3 fractures is correlated with lower dislocation and stem loosening rates, necessitating fewer reoperations and shorter fracture healing times compared with the uncemented approach. The cemented group had a notably higher mortality rate, urging caution in its clinical interpretation.

Operative Management of Atypical Femur Fractures.

VIDEO AVAILABLE AT: https://ota.org/education/ota-online-resources/video-library-procedures-techniques/operative-management-atypical#/+/0/score,date_na_dt/desc/.

Achieving Limb-Length Equality in Femoral Shaft Fractures.

VIDEO AVAILABLE AT: https://ota.org/education/ota-online-resources/video-library-procedures-techniques/achievinglimb-length-equality.

Femoral Neck Fractures With Associated Ipsilateral Femoral Shaft Fractures in Young Adults <50 Years Old: A Multicenter Comparison of 80 Cases Versus Isolated Femoral Neck Fractures.

OBJECTIVES: To analyze patients, injury patterns, and treatment of femoral neck fractures (FNFs) in young patients with FNFs associated with shaft fractures (assocFNFs) to improve clinical outcomes. The secondary goal was to compare this injury pattern to that of young patients with isolated FNFs (isolFNFs). DESIGN: Retrospective multicenter cohort series. SETTING: Twenty-six North American level-1 trauma centers. PATIENT SELECTION CRITERIA: Skeletally mature patients, <50 years old, treated with operative fixation of an FNF with or without an associated femoral shaft fracture. OUTCOME MEASURES AND COMPARISONS: The main outcome measurement was treatment failure defined as nonunion, malunion, avascular necrosis, or subsequent major revision surgery. Odds ratios for these modes of treatment were also calculated. RESULTS: Eighty assocFNFs and 412 isolFNFs evaluated in this study were different in terms of patients, injury patterns, and treatment strategy. Patients with assocFNFs were younger (33.3 ± 8.6 vs. 37.5 ± 8.7 years old, P < 0.001), greater in mean body mass index [BMI] (29.7 vs. 26.6, P < 0.001), and more frequently displaced (95% vs. 73%, P < 0.001), "vertically oriented" Pauwels type 3, P < 0.001 (84% vs. 43%) than for isolFNFs, with all P values < 0.001. AssocFNFs were more commonly repaired with an open reduction (74% vs. 46%, P < 0.001) and fixed-angle implants (59% vs. 39%) (P < 0.001). Importantly, treatment failures were less common for assocFNFs compared with isolFNFs (20% vs. 49%, P < 0.001) with lower rates of failed fixation/nonunion and malunion (P < 0.001 and P = 0.002, respectively). Odds of treatment failure [odds ratio (OR) = 0.270, 95% confidence interval (CI), 0.15-0.48, P < 0.001], nonunion (OR = 0.240, 95% CI, 0.10-0.57, P < 0.001), and malunion (OR = 0.920, 95% CI, 0.01-0.68, P = 0.002) were also lower for assocFNFs. Excellent or good reduction was achieved in 84.2% of assocFNFs reductions and 77.1% in isolFNFs (P = 0.052). AssocFNFs treated with fixed-angle devices performed very well, with only 13.0% failing treatment compared with 51.9% in isolFNFs treated with fixed-angle constructs (P = <0.001) and 33.3% in assocFNFs treated with multiple cannulated screws (P = 0.034). This study also identified the so-called "shelf sign," a transverse ≥6-mm medial-caudal segment of the neck fracture (forming an acute angle with the vertical fracture line) in 54% of assocFNFs and only 9% of isolFNFs (P < 0.001). AssocFNFs with a shelf sign failed in only 5 of 41 (12%) cases. CONCLUSIONS: AssocFNFs in young patients are characterized by different patient factors, injury patterns, and treatments, than for isolFNFs, and have a relatively better prognosis despite the need for confounding treatment for the associated femoral shaft injury. Treatment failures among assocFNFs repaired with a fixed-angle device occurred at a lower rate compared with isolFNFs treated with any construct type and assocFNFs treated with multiple cannulated screws. The radiographic "shelf sign" was found as a positive prognostic sign in more than half of assocFNFs and predicted a high rate of successful treatment. LEVEL OF EVIDENCE: Therapeutic Level III. See Instructions for Authors for a complete description of levels of evidence.

The Effects of Unitizing Nail-Plate Constructs in Distal Femur Fractures: A Biomechanical Study.

OBJECTIVES: To assess the biomechanical differences between linked and unlinked constructs in young and osteoporotic cadavers in addition to osteoporotic sawbones. METHODS: Intraarticular distal femur fractures with comminuted metaphyseal regions were created in three young matched pair cadavers, three osteoporotic matched pair cadavers, and six osteoporotic sawbones. Precontoured distal femur locking plates were placed in addition to a standardized retrograde nail, with unitized constructs having one 4.5 mm locking screw placed distally through the nail. Nonunitized constructs had seven 4.5 mm locking screws placed through the plate around the nail, with one 5 mm distal interlock placed through the nail alone. Cadaveric specimens were subjected to axial fatigue loads between 150 and 1500 N (R Ratio = 10) with 1 Hx frequency for 10,000 cycles. Sawbones were axially loaded at 50% of the ultimate load for fatigue testing to achieve runout, with testing performed with 30 and 300 N (R Ratio = 10) loads with 1 Hz frequency for 10,000 cycles. RESULTS: In young cadavers, there was no difference in the mean cyclic displacement of the unitized constructs (1.51 ± 0.62mm) compared to the non-unitized constructs (1.34 ± 0.47mm) (Figure 4A), (p = 0.722). In osteoporotic cadavers, there was no difference in the mean cyclic displacement of the unitized constructs (2.46 ± 0.47mm) compared to the non-unitized constructs (2.91 ± 1.49mm) (p =0.639). There was statistically no significant difference in cyclic displacement between the unitized and non-unitized groups in osteoporotic sawbones(p = 0.181). CONCLUSIONS: Linked constructs did not demonstrate increased axial stiffness or decreased cyclical displacement in comparison to unlinked constructs in young cadaveric specimens, osteoporotic cadaveric specimens, or osteoporotic sawbones.

Quantitative-MRI analysis of the effects of retrograde nailing on vascularity of the distal femur: A cadaveric study.

BACKGROUND: Distal femur fractures remain treatment challenges with a considerable postoperative non-union rate. Concern remains that surgery may compromise osseous vascularity. This study aimed to determine effects of retrograde femoral intramedullary nailing (RFIN) on distal femur vascularity, and the locations of the middle genicular artery terminal branches in relation to the standard RFIN entry point. METHODS: Five lower limb cadaveric pairs were obtained (ten specimens). Experimental limbs were randomly assigned, and contralateral limbs served as controls. An 11 mm femoral nail was implanted in experimental specimens. Controls only underwent a medial parapatellar incision with capsulotomy. Quantitative pre- and post-contrast-MRI was performed to assess arterial contributions to distal femur regions. Osseous vascularity was further evaluated with contrast-CT imaging. Next, specimens were injected with latex medium, and dissection was performed to assess extraosseous vasculature. RESULTS: No statistically significant differences were found with quantitative-MRI in experimental and control groups for the entire distal femur or individual regions. The experimental group demonstrated a small mean decrease of 1.4% in distal femur arterial contributions. CT and anatomic dissection confirmed maintenance of middle genicular artery terminal branches. On average, 3.3 (±1.3) terminal branches entered along the posterior intercondylar notch. A mean distance of 15.2 mm (±6.9 mm) was found between the posterior RFIN entry point and these terminal branches. CONCLUSIONS: RFIN did not significantly alter arterial contributions to the distal femur or disrupt the middle genicular artery terminal branches. However, care must be taken to ensure nail entry point accuracy given proximity of the entry point to terminal branches.

Assessment of implant internal stresses under physiological femoral loading: Translation to a simplified bending load model.

The success of surgical treatment for fractures hinges on various factors, notably accurate surgical indication. The process of developing and certifying a new osteosynthesis device is a lengthy and costly process that requires multiple cycles of review and validation. Current methods, however, often rely on predecessor standards rather than physiological loads in specific anatomical locations. This study aimed to determine actual loads experienced by an osteosynthesis plate, exemplified by a standard locking plate for the femoral shaft, utilizing finite elements analysis (FEA) and to obtain the bending moments for implant development standard tests. A protocol was developed, involving the creation and validation of a fractured femur model fixed with a locking plate, mechanical testing, and FEA. The model's validation demonstrated exceptional accuracy in predicting deformations, and the FEA revealed peak stresses in the fracture bridging zone. Results of a parametric analysis indicate that larger fracture gaps significantly impact implant mechanical behavior, potentially compromising stability. This study underscores the critical need for realistic physiological conditions in implant evaluations, providing an innovative translational approach to identify internal loads and optimize implant designs. In conclusion, this research contributes to enhancing the understanding of implant performance under physiological conditions, promoting improved designs and evaluations in fracture treatments.