Investigating extrusion impact on functional, textural properties, morphological structure, and molecular interactions in hulless barley-based extruded snacks supplemented with mung bean.

The effect of varying extrusion conditions on the functional properties of hulless barley-mung bean (70:30) extruded snacks was investigated using response surface methodology with feed moisture (FM), barrel temperature (BT), and screw speed (SS) as process variables. Results revealed significant impacts on functional characteristics with varying extrusion conditions. Bulk density (BD) of extruded snacks ranged from 0.24 to 0.42 g/cm3, showing that lower FM and higher BT results in lower BD while it increased with increasing FM, SS, and BT. The expansion ratio (ER) of extruded snacks ranged between 2.03 and 2.33, showing BT and SS had a desirable positive effect, whereas increasing FM led to decreased ER. Increasing BT and SS depicted a negative effect on water absorption index, whereas FM showed positive effect, which ranged between 4.21 and 4.82 g/g. A positive effect on water solubility index was depicted by BT and SS, which ranges between 9.01% and 13.45%, as higher SS and BT led to starch degradation and increased solubility suggesting better digestibility. The hardness of extruded snacks ranged from 32.56 to 66.88 Newton (N), showing increasing FM increased hardness, whereas higher SS and BT resulted in lowering the hardness. Scanning electronic microscope (SEM) analysis revealed structural changes in extrudates in comparison with nonextruded flour, indicating starch gelatinization and pore formation affected by varying processing parameters. Shifts in absorption bands were observed in Fourier transform infrared spectroscopy (FT-IR), suggesting structural changes in starch and protein. Understanding the effects of extrusion parameters on product properties can help tailored production to meet consumers' preferences and the development of functional snacks with improved nutritional quality.

Role of particle size in modulating starch digestibility and textural properties in a rye bread model system.

In cereal products, the use of flour containing clusters of intact cells has been indicated as a potential strategy to decrease starch digestion. Rye possesses more uniform and thicker cell walls than wheat but its protective effect against starch digestion has not been elucidated. In this study, rye flours with three different particle sizes, large (LF) (∼1700 µm), medium (MF) (∼1200 µm), and small (SF) (∼350 µm), were used to produce model bread. The textural properties of these breads were analysed using Textural Profile Analysis (TPA). The starch digestibility of both the flour and the bread was measured using Englyst's method, while the presence of intact cell clusters was examined using Confocal Laser Scanning Microscopy (CLSM). Additionally, the disintegration of bread digesta during simulated digestion was assessed through image analysis. CLSM micrographs revealed that bread made with MF and LF retained clusters of intact cells after processing, whereas bread made with SF showed damaged cell walls. Starch digestibility in LF and MF was lower (p ≤ 0.05) than that in SF. Bread produced with MF and LF exhibited the least (p ≤ 0.05) cohesive and resilient texture, disintegrated more during digestion, and exhibited higher starch digestibility (p ≤ 0.05) than bread made with SF. These results highlight the central role of bread texture on in vitro starch digestibility.

Unraveling chemical changes associated with the sensory quality of Chinese steamed bread as altered by wheat flour type.

Chinese steamed bread (CSB) is an important staple of the Chinese people, and its flavor profile is mostly affected by wheat varieties among others. This study selected wheat flour made from three different wheat varieties and investigated their contribution to the CSB flavor profile in terms of metabolism. Thirteen aroma-active compounds identified by GC-O were determined as the main contributors to the different aroma profiles of three CSBs. 350 sensory trait-related metabolites were obtained from five key modules via weighted gene co-expression network analysis. It was found that the sensory characteristics of CSBs made of different wheat flour were significantly different. The higher abundance of lipids in Yongliang No.4 (YL04) wheat flour was converted to large number of fatty acids in fermented dough, which led to the bitterness of CSB. Besides, the abundance in organic acids and fatty acids contributed to the sour, milky, wetness and roughness attributes of YL04-CSB. More fatty amides and flavonoids in Jiangsu Red Durum wheat flour contributed to the fermented and winey attributes of CSB. Carbohydrates with higher abundance in Canadian wheat flour was involved in sugar-amine reaction and glucose conversion, which enhanced the sweetness of CSB. In addition, fatty acids, organic acids, amino acids, and glucose were crucial metabolites which can further formed into various characteristic compounds such as hexanal, hexanol, 2,3-butanediol, acetoin, and 2,3-butanedione and thus contributed to the winey, fresh sweet, and green aroma properties. This study is conductive to better understand the evolution of the compounds that affect the quality and aroma of CSBs.

Buriti (Mauritia flexuosa) shell flour: Nutritional composition, chemical profile, and antioxidant potential as a strategy for valuing waste from native Brazilian fruits.

The Cerrado is one of the most biodiverse biomes in the world, characterized by a wealth of native fruits with unique nutritional characteristics. In this sense, the social, economic, and environmental importance of fully utilizing food is widely recognized. Therefore, generally considered waste, fruit shells can be transformed into a coproduct with high added value. The objective of this work was to carry out a comprehensive assessment of the physicochemical properties, carbohydrate and fatty acid profile, phytochemical compounds, phenolic profile, and antioxidant potential of the recovered extracts of buriti (Mauritia flexuosa) shells in natura and dehydrated at 55 °C (flour). In addition, the functional properties were verified by thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FTIR) from buriti shell flour. The results indicated high fiber content and energy value for the sample processed at 55 °C (58.95 g/100 g and 378.91 kcal/100 g, respectively) and low lipid and protein content (1.03 g/100 g and 1.39 g/100 g, respectively). Regardless of the sample analyzed, maltose was the majority sugar (37.33 - 281.01 g/100 g). The main fatty acids detected were oleic acid (61.33 - 62.08 %) followed by palmitic acid (33.91 - 34.40 %). The analysis of the mineral profile demonstrated that the samples did not differ significantly from each other, showing that the drying process did not interfere with the results obtained (p ≤ 0.05). The analysis of individual phenolics allowed the identification of six phenolic compounds in buriti shells. However, it is possible to observe that the drying method had a positive and significant influence on the phenolic profile (p ≤ 0.05), with chlorogenic acid (2.63 - 8.27 mg/100 g) and trigonelline (1.06 - 41.52 mg/100 g), the majority compounds. On the other hand, it is important to highlight that buriti shells have a high content of carotenoids, mainly ß-carotene (27.18 - 62.94 µg/100 g) and α-carotene (18.23 - 60.28 µg/100 g), also being positively influenced by the drying process at 55 °C (p ≤ 0.05). The dried shells showed a high content of phytochemical compounds and high antioxidant activity based on the different methods tested. The results show that buriti shell flour can be fully utilized and has nutritional and chemical aspects that can be applied to develop new sustainable, nutritious, and functional food formulations.

Application of supercritical carbon dioxide to enhance the aroma of whole sorghum flour for use in 3D printing of sorghum cookies.

Sorghum is a promising ingredient for new food products due to its high fiber content, slow digestibility, drought resistance, and gluten-free nature. One of the main challenges in sorghum-based products is the unpleasant aroma compounds found in grain sorghum. Therefore, in this study, sorghum flour was treated via supercritical carbon dioxide (SC-CO2) to remove undesired aroma compounds. The resulting SC-CO2-treated flours were used to generate dough for 3D food printing. At the optimized conditions, sorghum cookies were 3D-printed using 60 % water and a nozzle diameter of 1.5 mm. All dough samples produced with untreated and SC-CO2-treated sorghum flours exhibited shear-thinning behavior. Changing the treatment pressure (8-15 MPa) or temperature (40-60 °C) did not significantly affect the viscosity of the dough samples. Moreover, the sorghum cookie doughs had higher G' and G″ values after the SC-CO2 treatments (G' > G″). Doughs generated from flours treated at 15 MPa - 40 °C and 8 MPa - 60 °C showed lower adhesiveness compared to the ones produced from untreated flour, whereas 15 MPa - 60 °C treatment did not affect the adhesiveness. After baking, the 3D-printed cookies from SC-CO2-treated flour exhibited significantly lower redness (a*), but the hardness of the cookies was not affected by SC-CO2 treatment. Overall, the SC-CO2 treatment of sorghum flour did not negatively affect the quality parameters of the 3D-printed cookies while enhancing the aroma of the flour.

Effect of fermentation on nutrient composition, antinutrients, and mineral bioaccessibility of finger millet based Injera: A traditional Ethiopian food.

Finger millet, like other cereals, contains high amounts of antinutrients that bind minerals, making them unavailable for absorption. This study explores the effect of traditional fermentation on nutritional, antinutritional, and subsequent mineral bioaccessibility (specifically iron, zinc, and calcium) of finger millet based Injera. Samples of fermented dough and Injera prepared from light brown and white finger millet varieties were analyzed for nutritional composition, antinutritional content, and mineral bioaccessibility following standard procedures. With some exceptions, the proximate composition of fermented dough was significantly affected by fermentation time. Compared to unfermented flour, the phytate and condensed tannin content significantly (p < 0.05) decreased for fermented dough and Injera samples. A strong decline in phytate and condensed tannin content was observed in white finger millet Injera as fermentation time increased, compared to light brown finger millet based Injera. The mineral bioaccessibility of Injera prepared from finger millet and maize composite flour increased with fermentation time, leading to a significant increase in bioaccessible iron, zinc, and calcium, ranging from 15.4-40.0 %, 26.8-50.8 %, and 60.9-88.5 %, respectively. The results suggest that traditional fermentation can be an effective method to reduce phytate and condensed tannin content, simultaneously increasing the bioaccessibility of minerals in the preparation of finger millet based Injera.

Gluten-containing flours and gluten-free flours as a source of calcium, magnesium, iron and zinc.

Wheat flour is widely used in Poland for the preparation of bread, pasta and other foods. Due to the increasing number of people diagnosed with diet-related diseases, consumer awareness of health-promoting issues and interest in gluten-free products (GFP). There is a dynamic development of the market for these foods with high quality and nutritional value and minerals that benefit human health and prevent deficiencies in patients on a gluten-free diet. The aim of this study was to determine the content of minerals: Ca, Fe, Mg and Zn in flours using the ICP-OES method. The mineral composition of selected GF flours available on the Polish market was analysed. It was tested how they supplement the mineral requirements compared to gluten-containing flours. It was found that these products can be a valuable source of essential minerals, which are often in short supply, especially in patients with gastrointestinal disorders. As our study has shown, flours from the GFP group are a good source of essential minerals, especially in the case of chia and flax flours, as well as buckwheat, amaranth, quinoa, lupin or almonds flours.

Physicochemical characterization of wheat starch and variation of fatty acid composition in deep-fried dough sticks with different treatments.

The present study investigated the effects of different deep-frying times and temperatures on the amylose content, crystal structure, thermodynamics, and other properties of deep-fried dough sticks. Results showed that the change of amylose content in deep-fried dough sticks during the deep-frying process was positively correlated with time and temperature. Moreover, the deep-frying process of deep-fried dough sticks was accompanied by the formation of starch-lipid complexes that led to the destruction of starch structure. The degreased sample and the oil sample had the same absorption peaks at 2854 and 1746 cm-1, respectively. The melting enthalpy (ΔH) of the starch-lipid complex decreased significantly. In addition, the viscosity of starch reduced as the deep-frying time and temperature increased. Furthermore, it was found that the effect of increasing deep-frying temperature was greater than that of time. PRACTICAL APPLICATION: As a popular deep-fried food, the main component of deep-fried dough sticks is starch. Starch gelatinization, protein denaturation, and interaction among components occurred during deep-frying. At present, there are few studies focusing on the properties of starch in deep-fried dough sticks in the real deep-frying system. Therefore, this study provided a theoretical basis for subsequent research by measuring the effects of different deep-frying conditions on the properties of starch in deep-fried dough sticks.

Quality analysis of dough and steamed bread under various freezing conditions.

Freezing is a crucial step in the process of frozen foods. In this study, the effects of different freezing methods, including liquid nitrogen immersion freezing (LF), quick-freezing machine freezing (QF), packaging immersion freezing (PF), and ultralow temperature refrigerator freezing (UF), and freezing time (0, 15, 30, and 60 days) on the textural properties, dynamic rheological properties, water distribution, and structure of dough and the quality of end steamed bread were evaluated. Freezing resulted in a decline in the physicochemical properties of dough. UF- and QF-doughs had higher storage modulus and loss modulus, compared with PF- and LF-doughs. LF enhanced the textural attributes of the dough, resulting in reduced hardness and increased springiness. At 15 days of freezing, QF- and LF-doughs exhibited a compact and continuous structure with a smooth surface. Additionally, the correlation analysis elucidated that the weight loss rate and the bound water content of the dough had discernible impacts on the texture of both the dough and the resulting steamed bread. Overall, LF demonstrated a relatively high freezing efficiency and effectively maintained the quality of the dough for up to 15 days of freezing. These results offer valuable insights for the applications of freezing methods and time in frozen foods.

Sourdough fermentation for the valorization of sorghum flour: Microbiota characterization and metabolome profiling.

Due to a large adaptability to different cultivation conditions and limited input compared to other cereals, sorghum is considered an emerging crop. Its antioxidant properties, high fiber content and low glycemic index also make it a valuable addition to a healthy diet, nevertheless, the presence of antinutritional factors and the lack of gluten, hamper its use as food ingredient. This study investigated the impact of sourdough fermentation on sorghum nutritional quality. Lactic acid bacteria dominating sorghum flour and sourdough were identified by culture-dependent analysis revealing Lactiplantibacillus plantarum as the dominant species found in the mature sourdough, whereas Weissella cibaria and Weissella paramesenteroides were the species isolated the most after the first refreshment. Among yeasts, Saccharomyces cerevisiae was the most prevalent. Lactic acid bacteria pro-technological and functional performances as starter were evaluated in sorghum type-II sourdoughs through an integrated characterization combining chromatographic and NMR spectroscopic techniques. The metabolic profile of the strains mainly grouped together W. cibaria strains and W. paramesenteroides AI7 which distinguished for the intense proteolysis but also for the presence of compounds particularly interesting from a physiological perspective (allantoin, glutathione, γ-aminobutyric acid and 2-hydroxy-3-methylbutyric acid), whose concentration increased during fermentation in a species or strain specific matter.

Young bamboo flour as a substitute for emulsifying salts in requeijão cremoso processed cheese and the effect on the quality parameters.

The effect of the substitution of emulsifying salt by the young bamboo flour (BF) (0, 25, 50, 75, 100 % w/w) on requeijão cremoso processed cheese [REQ, REQ 25, REQ 75 REQ 100]) processing was investigated. Gross composition, calcium and sodium values, functional properties (melting rate), color parameters (L, a*, b*, C*, and Whiteness Index, WI), texture profile, fatty acid profile, volatile organic compounds (VOCs), and sensory profiling were evaluated. No effect was observed on the gross composition; however, sodium and melting rate values were decreased, and calcium values presented the opposite behavior. BF could modify the optical parameters, observing an increase in WI values. Higher BF addition increased hardness and lowered elasticity, and regarding the fatty acid profile, there is no significant difference. Different volatile compounds were noted in a proportional form with the BF addition, which was reflected in similar sensory acceptance for REQ 25 and control samples. Although some aspects require further in-depth studies, using BF as a substitute for emulsifying salt in requeijão cremoso processed cheese appears to be a viable option, especially when considering partial replacements.

Type III sourdough: Evaluation of biopreservative potential in bakery products with enhanced antifungal activity.

The potential biopreservative role of a Type III sourdough (tIII-SD), produced by starter cultures of Fructilactobacillus sanfranciscensis and Lactiplantibacillus plantarum ATCC 8014, was assessed for its antifungal activity in baking applications. Fermentation was carried out using different substrates to enhance the production of antifungal metabolites for 24 and 48 h. The tIII-SD samples were analyzed in relation to pH, total titratable acidity (TTA) and the production of organic acids. The water/salt-soluble extract of the tIII-SD was evaluated in relation to the inhibition potential against key fungi that contaminate bakery products including Penicillium roqueforti, Penicillium chrysogenum and Aspergillus niger. Finally, breads with 10 % of the tIII-SD were prepared and the fungi contamination was evaluated throughout the shelf life period. The lowest pH value in sourdough was obtained from 48-hour fermentation by L. plantarum. The saline extracts exhibited varying degrees of inhibition in the in vitro test; however, the greatest enhancement of this effect was obtained when whole wheat grain flour was used. The tIII-SD crafted from a blend of wheat and flaxseed flours and fermented with F. sanfranciscensis for 48 h (BSWF48h-FS), demonstrated superior performance compared to other formulations. This variant exhibited a total shelf life of 10 days, suggesting that the utilization of tIII-SD could serve as a viable alternative for natural antifungal agents, proving beneficial for the bakery industry.

Changes in rheology and components during the processing of Chinese traditional handmade hollow dried noodle.

The study of the changes in rheological properties and components during the processing of Chinese traditional handmade hollow dried noodle (HHDN) is essential to explaining the excellent quality of HHDN. The dynamic oscillation frequency sweep, stress relaxation, and uniaxial extension characteristics of the dough after kneading, stretching, and resting were investigated at six sampling points during the processing of HHDN. The result showed that stretching led to an increase in G' and G0, and a significant decrease (P < 0.05) in extensibility from 131.02 mm to 57.99 mm. Confocal laser scanning microscopy (CLSM) was used to observe the microstructure of the gluten network, which was destroyed during stretching and restored during resting. Studies of changes in components showed that the stretching process resulted in a decrease in GMP content from 3.24 (g/100 g) to 3.18 (g/100 g), and the resting process resulted in ß-sheets decreasing significantly (P < 0.05). The degree of starch pasting increased significantly (P < 0.05) after stretching. The results of the correlation analysis showed that components changes were highly correlated with the rheological properties during the processing of HHDN.

Heat-moisture treatment of freshly harvested high-amylose maize kernels improves its starch thermal stability and enzymatic resistance.

The objective of this work was to study the effects of heat-moisture treatment (HMT) of freshly harvested mature high-amylose maize (HAM) kernels on its starch structure, properties, and digestibility. Freshly harvested HAM kernels were sealed in Pyrex glass bottles and treated at 80 °C, 100 °C, or 120 °C. HMT of HAM kernels had no impact on its starch X-ray diffraction pattern but increased the relative crystallinity. This result together with the increased starch gelatinization temperatures and enthalpy change indicated starch molecules reorganization forming long-chain double-helical crystalline structure during HMT of HAM kernels. The aggregation of starch granules were observed after HMT, indicating interaction of starch granules and other components. This interaction and the high-temperature crystalline structure led to reductions in the starch digestibility, swelling power, solubility, and pasting viscosity of the HAM flours. Some starch granules remained intact and showed strong birefringence after the HAM flours were precooked at 100 °C for 20 min and followed by enzymatic hydrolysis, and the amount of undigested starch granules increased with increasing HMT temperatures. This result further supported that HMT of HAM kernels with high moisture level could increase the starch thermal stability and enzymatic resistance.

Influence of fermentation conditions, and the blends of sorghum and carrot pulp supplementation on the nutritional and sensory quality of tef injera.

Tef [Eragrostis tef (Zucc.) Trotter], an ancient cereal primarily grown in Ethiopia, is becoming increasingly popular worldwide due to its high iron content and gluten-free nature. However, it has been reported that injera produced only with tef flour lack certain vital nutrients. Therefore, this specific study was conducted to supplement tef injera with other food materials of better nutritional value and compensate its expensive market price with sorghum cereal flour. The effect of fermentation conditions, and the sorghum and carrot pulp blending ratio on the nutritional value and sensory quality of tef injera was investigated. The factorial approach of the experimental design was conducted considering the nutritional value and sensory quality of the injera made of three main blending ratios of tef, sorghum, and carrot (60% tef: 30% sorghum: 10% carrot pulp, 45% tef: 45% sorghum: 10% carrot pulp and 30% tef: 60% sorghum: 10% carrot pulp) as experiential variables. The raw materials and injera were characterised for their proximate composition, physicochemical property, mineral composition, microbial analysis, and sensory attributes, using standard methods. The results of the study show that fermentation conditions and blending ratios have a significant effect on the nutritional, anti-nutritional, mineral content, microbial quality, and sensory properties of blended injera products, where higher values of ash, crude protein, crude fat, Total titratable acidity (TTA), Fe, Zn, and Ca (2.30%, 11.34%, 2.62%, 3.53, 32.97 mg/100 g, 2.98 mg/100 g and 176.85 mg/100 g, respectively) were analyzed for the co-fermented injera sample. In addition, a lower microbial count was observed in co-fermented injera samples, whereas microbial counts in injera samples prepared from carrot pulp-supplemented dough after the co-fermentation of tef and sorghum flours were observed to be higher. The injera product made using blending ratio of 60% tef: 30%sorghum: 10% carrot co-fermented was found to be the optimum result due to its very good nutritional improvement (i.e., reduction of some anti-nutritional factors, microbial contents, pH and increased contents of some minerals, crude protein, crude fat, TTA and improved most of the sensory quality of the supplemented injera product). According to this study, sorghum and carrot supplementation on tef could improve the nutritional value of injera while also providing an instant remedy for the growing price of tef.

Efficacy of Zinc Fortified and Fermented Wheat Flour (EZAFFAW): A randomized controlled trial protocol.

BACKGROUND: Zinc deficiency poses significant health risks, particularly in low-income settings. This study aims to evaluate the impact of agronomically zinc biofortified (fermented and non-fermented) and post-harvest wheat flour flatbread on zinc status and metabolic health in adolescents and adult women in rural Pakistan. METHODS: A four-arm triple-blind randomized controlled trial will be conducted in a rural district of Pakistan. Participants (adolescents aged 10-19 and adult women aged 20-40) will be assigned to receive fermented or unfermented high zinc agronomically biofortified wheat flour flatbread, post-harvest zinc-fortified wheat flour flatbread, or low zinc conventional whole wheat flour flatbread. The meal would be served once a day, six days a week for six months. The study aims to enroll 1000 participants and will be analyzed based on the intention-to-treat principle. The trial is registered with number NCT06092515. OUTCOMES: Primary outcomes will include serum zinc concentration and metabolic markers, while secondary outcomes include anthropometric measurements, blood pressure, and dietary intake. CONCLUSION: This trial will provide valuable insights into the efficacy of agronomically zinc biofortified wheat flour in improving zinc status and metabolic health. Findings may inform public health strategies to combat zinc deficiency in resource-limited settings.

Impacts of transglutaminase on the processing and digestion characteristics of glutinous rice flour: Insight of the interactions between enzymic crossing-linked protein and starch.

Glutinous rice is extensively consumed due to its nutritious content and wonderful flavor. However, glutinous rice flour has a high glycemic index, and the storage deterioration of sweet dumplingsissevere. Transglutaminase (TG) was used to cross-link glutinous rice protein and improve the characteristics of glutinous rice products. The findings demonstrated that TG significantly catalysed protein cross-linking to form a dense protein network, reduced the viscosity of glutinous rice paste and improved the thermal stability. The protein network may physically block the access of starch granules to digestive enzymes to lower the digestion rate of starch, and attenuate the damage of ice crystal molecules to the starch structure to improve the freezing stability of starch gels. The cracking rate and water loss of sweet dumplings prepared using glutinous rice flour with TG treated for 60 min reduced significantly. In conclusion, this study broadened the application of TG in starch products.

[Highly sensitive detection of fluorescent whitening agents in flour using sheathless capillary electrophoresis-electrospray ionization-tandem mass spectrometry].

Fluorescent whitening agents (FWAs) are dyes that emit visible blue or blue-purple fluorescence upon ultraviolet-light absorption. Taking advantage of light complementarity, FWAs can compensate for the yellow color of many substances to achieve a whitening effect; thus, they are used extensively in various applications. FWAs are generally stable, but their presence in the environment can lead to pollution and accumulation in the body through the food chain. Recent studies have revealed that some types of FWAs, such as coumarin-based FWAs, may exhibit photo-induced mutagenic effects that can trigger allergic reactions in humans and even pose carcinogenic risks. Hence, the development of an accurate and highly sensitive method for detecting FWAs in food-related samples is a crucial endeavor. Owing to the high polarity and structural similarity of FWAs, the accurate determination of these substances in complex food samples requires an analytical method that offers both efficient separation and sensitive detection. Capillary electrophoresis (CE) exhibits essential features such as high separation efficiency, short analysis times, very small sample injection requirements, minimal use of organic solvents, and simple operation. Thus, it is often used as an effective alternative to liquid chromatographic techniques. Over the past few decades, electrospray ionization mass spectrometry (ESI-MS) has been utilized as a highly sensitive and accurate detection method in numerous chemical analytical fields because it enables the analysis of molecular structures. By combining the high separation efficiency of CE with the high sensitivity of ESI-MS, a powerful tool for identifying and quantifying trace amounts of FWAs in food samples may be obtained. In this study, we present a method based on sheathless CE coupled with electrospray ionization tandem mass spectrometry (ESI-MS/MS) for the simultaneous detection of six trace FWAs in flour. In the proposed method, the CE separation device is directly coupled to the mass spectrometer through a sheathless interface without the need for a sheath liquid for electric contact, thereby avoiding the dilution of the analytes and improving detection sensitivity. Various conditions that could affect extraction recovery, separation efficiency, and detection sensitivity were evaluated and optimized. The FWAs were effectively extracted from the sample matrix with reduced matrix effects by ultrasonic-assisted extraction at a temperature of 30 ℃ for 20 min using CHCl3-MeOH (3∶2, v/v) as the extraction solvent. The extract was centrifuged, dried under N2, and reconstituted in CHCl3-MeOH (1∶4, v/v) for subsequent analysis. During the detection process, the CE device was coupled to the ESI-MS/MS instrument via a highly sensitive porous spray needle, which served as the sheathless electrospray interface. The target FWAs were scanned in positive-ion mode (ESI+) to ensure the stability and intensity of the obtained signals. Additionally, multiple-reaction monitoring (MRM) mode and MS/MS analysis were used to simultaneously quantify the six targets with high selectivity. The developed sheathless CE-ESI-MS/MS method detected the FWAs with high sensitivity over wide linear ranges with low method limits of detection (0.04-0.67 ng/g). The recoveries of the six target FWAs at three spiked levels were between 77.5% and 97.2%, with good interday (RSD≤11.5%) and intraday (RSD≤10.2%) precision. Analyses of the six target FWAs in eight commercial flour samples were performed using this method, and four positive samples were identified. These results demonstrate that the proposed CE-ESI-MS/MS method is a promising strategy for the determination of trace FWAs in complex food sample matrices with efficient separation and high sensitivity.

A novel yeast-based biosensor for the quick determination of Deoxynivalenol.

Mycotoxins are commonly found in food materials and severely threaten human health. Antibodies play a key role as a part of immunological techniques in detecting mycotoxins. Therefore, highly specific antibodies and detection techniques against mycotoxins need to be developed for advancements in medical research. In this study, we presented a novel strategy for quickly screening highly specific antigen-binding fragment (Fab) antibodies based on yeast surface display (YSD) and detecting small-molecule compounds based on a YSD biosensor. We constructed a yeast surface display Deoxynivalenol (DON)-Fab library with 105 cfu/mL with a galactose-inducible bidirectional promoter. By conducting efficient magnetic-activated cell sorting and fluorescence-activated cell sorting (MACS/FACS), four kinds of DON-selective yeasts were screened. As Fab@YSD C4# showed high sensitivity, we used it to build a one-pot Fab@YSD chemiluminescence biosensor with DON-BSA@Biotin and Streptavidin-alkaline phosphatase (SA-ALP). This method showed a low operational threshold (LOD = 0.166 pg/mL) and a high population range (linear range = 0.001-132.111 ng/mL) within 40 min, which facilitated the detection of DON with high specificity and better recovery in real samples (wheat, corn, flour, and cornmeal). Our results suggested that the Fab@YSD chemiluminescence biosensor is an inexpensive, reproducible, user-friendly, and sensitive method for detecting DON and may be used to quickly detect other small-molecule contaminants in food items.

Developing high resistant starch content rice noodles with superior quality: A method using modified rice flour and psyllium fiber.

The effects of high-resistant starch (RS) content rice flour, psyllium husk powder (PHP), and psyllium powder (PP) on the edible quality and starch digestibility of rice noodles were investigated in this study. High-RS rice noodles showed lower digestibility but poor edible quality. With the addition of PHP and PP, high-RS rice noodles' cooking and texture quality were improved significantly, especially the breakage rates, cooking losses, and chewiness (P < 0.05). Compared to traditional white rice noodle's estimated glycemic index (eGI) of 86.69, the eGI values for 5PHP-RN and 5PHP-2PP-RN were significantly decreased to 66.74 and 65.77, achieving a medium GI status (P < 0.05). This resulted from the high amylose and lipid content in the modified rice flour and psyllium, leading to increase of starch crystallinity. Besides, based on the analysis of Pearson's correlation, it can be found that PHP rich in insoluble dietary fiber (IDF) could improve high-RS noodle cooking and texture quality better, while PP rich in soluble dietary fiber (SDF) can further reduce the RDS content and its starch digestibility. Therefore, utilizing modified rice flour with an appropriate addition of PHP and PP can be considered an effective strategy for producing superior-quality lower glycemic index rice noodles.