Occurrence, genetic characterization, and antibiotic susceptibility of Cronobacter spp. isolated from low water activity functional foods in Brazil.

Cronobacter spp. are bacterial pathogens isolated from a wide variety of foods. This study aims at evaluating the occurrence of Cronobacter spp. in low water activity functional food samples, detect the presence of virulence genes, and determine the antibiotic susceptibility of strains. From 105 samples, 38 (36.2%) were contaminated with Cronobacter spp. The species identified by polymerase chain reaction (PCR) and sequencing analyses (rpoB and fusA genes, respectively) were C. sakazakii (60.3%), C. dublinensis (25.4%), C. turincensis (9.5%), and C. malonaticus (4.8%). Nineteen fusA alleles were identified, including four new alleles. The virulence genes were identified by PCR and all isolates were positive for ompX and sodA genes, 60.3% to cpa gene, and 58.7% to hly gene. Using the disk diffusion method, antibiotic susceptibility to twelve antibiotics was assessed twice, separated by a 19-month period. In the first test, the isolates showed diverse antibiotic susceptibility profiles, with nineteen isolates (30.2%) being multi-drug resistant (resistant to three or more antibiotic classes), in the second, the isolates were susceptible to all antibiotics. Cronobacter spp. in functional foods demonstrates the need for continued investigation of this pathogen in foods, and further research is needed to clarify the loss of resistance of Cronobacter strains.

Application of gelatin-based zinc oxide nanoparticles bionanocomposite coatings to control Listeria monocytogenes in Talaga cheese and camel meat during refrigerated storage.

Listeria monocytogenes is a concerning foodborne pathogen incriminated in soft cheese and meat-related outbreaks, highlighting the significance of applying alternative techniques to control its growth in food. In the current study, eco-friendly zinc oxide nanoparticles (ZnO-NPs) were synthesized using Rosmarinus officinalis, Punica granatum, and Origanum marjoram extracts individually. The antimicrobial efficacy of the prepared ZnO-NPs against L. monocytogenes was assessed using the agar well diffusion technique. Data indicated that ZnO-NPs prepared using Origanum marjoram were the most effective; therefore, they were used for the preparation of gelatin-based bionanocomposite coatings. Furthermore, the antimicrobial efficacy of the prepared gelatin-based bionanocomposite coatings containing eco-friendly ZnO-NPs was evaluated against L. monocytogenes in Talaga cheese (an Egyptian soft cheese) and camel meat during refrigerated storage at 4 ± 1 oC. Talaga cheese and camel meat were inoculated with L. monocytogenes, then coated with gelatin (G), gelatin with ZnO-NPs 1% (G/ZnO-NPs 1%), and gelatin with ZnO-NPs 2% (G/ZnO-NPs 2%). Microbiological examination showed that the G/ZnO-NPs 2% coating reduced L. monocytogenes count in the coated Talaga cheese and camel meat by 2.76 ± 0.19 and 2.36 ± 0.51 log CFU/g, respectively, by the end of the storage period. Moreover, G/ZnO-NPs coatings controlled pH changes, reduced water losses, and improved the sensory characteristics of Talaga cheese and camel meat, thereby extending their shelf life. The obtained results from this study indicate that the application of gelatin/ZnO-NPs 2% bionanocomposite coating could be used in the food industry to control L. monocytogenes growth, improve quality, and extend the shelf life of Talaga cheese and camel meat.

Identification and evaluation of Escherichia coli strain ATCC 8739 as a surrogate for thermal inactivation of enterohemorrhagic Escherichia coli in fruit nectars: Impact of applied techniques on the decimal reduction time.

The objective of this study was to identify a suitable surrogate for E. coli O157:H7 strain 19685/91 and O113:H21 strain TS18/08, by assessing their thermal resistance at temperatures of 60 °C, 65 °C, and 72 °C in strawberry nectar. The influence of the matrix and the research methodology on the decimal reduction time (D-value) was investigated. Thermal kinetics and safety assessment demonstrated that E. coli ATCC 8739 is a suitable surrogate. The study demonstrated that the presence of fruit particles in the nectar increased thermal resistance of the tested strains. Variations in D-values were observed depending on the research method employed, with D-values in glass capillaries were up to 6.6 times lower compared to larger sample volumes. Encapsulation of E. coli ATCC 8739 exhibited high efficiency of 90.25 ± 0.26% and maintained stable viable counts after 26 days of storage in strawberry nectar at 4 °C. There were no significant differences in thermal resistance between surrogates directly inoculated into strawberry nectar and those encapsulated in alginate beads. Additionally, the encapsulated strains did not migrate outside the beads. Therefore, encapsulated E. coli ATCC 8739 in alginate beads can be effectively utilized in industrial settings to validate thermal treatments as a reliable and safe method.

The effect of 3D printing speed and temperature on transferability of Staphylococcus aureus and Escherichia coli during 3D food printing.

The current study aimed to determine if the 3D-printing speed and temperature would impact the transferability of foodborne pathogens from the stainless-steel (SS) food cartridge to the 3D-printed food ink. Staphylococcus aureus and Escherichia coli were inoculated onto the interior surface of the SS food cartridges. Subsequently, a model food ink was extruded with a recommended macronutrient contribution of 55.8, 23.7, and 20.5% of carbohydrates, proteins, and fat, respectively. The impact of 3D-printing temperatures and speeds on transfer rates was analysed using a Two-Way ANOVA. S. aureus was transferred more from the cartridge to the food ink with a population of 3.39, 2.98, and 3.09 log CFU/g compared to 2.03, 2.06, and 2.00 log CFU/g for E. coli at 2000, 3000, and 4000 mm/s printing speed, respectively, at 25 °C. A Kruskal-Wallis Test was employed to investigate the effect of different speeds and temperatures on the transferability of S. aureus and E. coli. Speed was the main factor affecting S. aureus transferability, while temperature (25 and 50 °C) had the greatest impact on E. coli transferability. This research seeks to advance the understanding of 3D-printing parameters in pathogen transferability and help the food industry move towards this technology's quick and safe adoption.

The Gamma concept approach as a tool to predict fresh produce supporting or not the growth of L. monocytogenes.

Challenge tests are commonly employed to evaluate the growth behavior of L. monocytogenes in food matrices; they are known for being expensive and time-consuming. An alternative could be the use of predictive models to forecast microbial behavior under different conditions. In this study, the growth behavior of L. monocytogenes in different fresh produce was evaluated using a predictive model based on the Gamma concept considering pH, water activity (aw), and temperature as input factors. An extensive literature search resulted in a total of 105 research articles selected to collect growth/no growth behavior data of L. monocytogenes. Up to 808 L. monocytogenes behavior values and physicochemical characteristics were extracted for different fruits and vegetables. The predictive performance of the model as a tool for identifying the produce commodities supporting the growth of L. monocytogenes was proved by comparing with the experimental data collected from the literature. The model provided satisfactory predictions on the behavior of L. monocytogenes in vegetables (>80% agreement with experimental observations). For leafy greens, a 90% agreement was achieved. In contrast, the performance of the Gamma model was less satisfactory for fruits, as it tends to overestimate the potential of acid commodities to inhibit the growth of L. monocytogenes.

Several secondary metabolite gene clusters in the genomes of ten Penicillium spp. raise the risk of multiple mycotoxin occurrence in chestnuts.

Penicillium spp. produce a great variety of secondary metabolites, including several mycotoxins, on food substrates. Chestnuts represent a favorable substrate for Penicillium spp. development. In this study, the genomes of ten Penicillium species, virulent on chestnuts, were sequenced and annotated: P. bialowiezense. P. pancosmium, P. manginii, P. discolor, P. crustosum, P. palitans, P. viridicatum, P. glandicola, P. taurinense and P. terrarumae. Assembly size ranges from 27.5 to 36.8 Mb and the number of encoded genes ranges from 9,867 to 12,520. The total number of predicted biosynthetic gene clusters (BGCs) in the ten species is 551. The most represented families of BGCs are non ribosomal peptide synthase (191) and polyketide synthase (175), followed by terpene synthases (87). Genome-wide collections of gene phylogenies (phylomes) were reconstructed for each of the newly sequenced Penicillium species allowing for the prediction of orthologous relationships among our species, as well as other 20 annotated Penicillium species available in the public domain. We investigated in silico the presence of BGCs for 10 secondary metabolites, including 5 mycotoxins, whose production was validated in vivo through chemical analyses. Among the clusters present in this set of species we found andrastin A and its related cluster atlantinone A, mycophenolic acid, patulin, penitrem A and the cluster responsible for the synthesis of roquefortine C/glandicoline A/glandicoline B/meleagrin. We confirmed the presence of these clusters in several of the Penicillium species conforming our dataset and verified their capacity to synthesize them in a chestnut-based medium with chemical analysis. Interestingly, we identified mycotoxin clusters in some species for the first time, such as the andrastin A cluster in P. flavigenum and P. taurinense, and the roquefortine C cluster in P. nalgiovense and P. taurinense. Chestnuts proved to be an optimal substrate for species of Penicillium with different mycotoxigenic potential, opening the door to risks related to the occurrence of multiple mycotoxins in the same food matrix.

Identification of microbial communities and multi-species biofilms contamination in seafood processing environments with different hygiene conditions.

Biofilms formed by spoilage and pathogenic bacteria increase microbial persistence, causing an adverse influence on the quality of seafood. The mono-species biofilms are widely reported, however, the contamination of multi-species biofilms and their matrix in food environments are still not fully understood. Here, we assessed the contamination of multi-species biofilms in three seafood processing environments with different hygiene levels by detecting bacterial number and three biofilm matrix components (carbohydrates, extracellular DNA (eDNA), and proteins). Samples comprising seven food matrix surfaces and eight food processing equipment surfaces were collected from two seafood processing plants (XY and XC) and one seafood market (CC). The results showed that the bacterial counts ranged from 1.89 to 4.91 CFU/cm2 and 5.68 to 9.15 BCE/cm2 in these surfaces by cultivation and real-time PCR, respectively. Six biofilm hotspots were identified, including four in CC and two in XY. Among the three processing environments, the amplicon sequence variants (ASVs) of Proteobacteria, Bacteroidetes, and Actinobacteria decreased with improved processing hygiene, while Firmicutes showed a decrease in the four most abundant phyla. The most prevalent bacteria belonged to genera Psychrobacter, Acinetobacter, and Pseudomonas, demonstrating the significant differences and alteration in bacterial community composition during different environments. From the biofilm hotspots, 15 isolates with strong biofilm forming ability were identified, including 7 Pseudomonas, 7 Acinetobacter, and 1 Psychrobacter. The Pseudomonas isolates exhibited the highest production of EPS components and three strong motilities, whose characteristics were positively correlated. Thus, this study verified the presence of multi-species biofilms in seafood processing environments, offering preliminary insights into the diversity of microbial communities during processing. It highlights potential contamination sources and emphasizes the importance of understanding biofilms composition to control biofilms formation in seafood processing environments.

Heat resistance of five spoilage microorganisms in a carbonated broth.

Despite their acidic pH, carbonated beverages can be contaminated by spoilage microorganisms. Thermal treatments, before and/or after carbonation, are usually applied to prevent the growth of these microorganisms. However, the impact of CO2 on the heat resistance of spoilage microorganisms has never been studied. A better understanding of the combined impact of CO2 and pH on the heat resistance of spoilage microorganisms commonly found in carbonated beverages might allow to optimize thermal treatment. Five microorganisms were selected for this study: Alicyclobacillus acidoterrestris (spores), Aspergillus niger (spores), Byssochlamys fulva (spores), Saccharomyces cerevisiae (vegetative cells), and Zygosaccharomyces parabailii (vegetative cells). A method was developed to assess the impact of heat treatments in carbonated media on microbial resistance. The heat resistances of the five studied species are coherent with the literature, when data were available. However, neither the dissolved CO2 concentration (from 0 to 7 g/L), nor the pH (from 2.8 to 4.1) have an impact on the heat resistance of the selected microorganisms, except for As. niger, for which the presence of dissolved CO2 reduced the heat resistance. This study improved our knowledge about the heat resistance of some spoilage microorganisms in presence of CO2.

Low flow-resistance solid phase extraction of fluoroquinolones in water and food samples by high-pressure wet spinning porous polyimide microfibers.

In this work, porous polyimide microfibers (PI-µF) were prepared by high-pressure wet spinning method, and successfully applied as adsorbents for solid phase extraction (SPE) of fluoroquinolones (FQs) in water and food samples. The PI-µFs of ∼10, 25, 50, 100 µm in diameter could be controlled by the inner diameter of quartz capillary nozzles. The flow resistance of SPE cartridges packed with 10 µm PI microfiber (10-PI-µF) and 25-PI-µF was comparable to or even lower than that of commercial SPE cartridges, while the flow resistance of 50-PI-µF and 100-PI-µF SPE cartridges was increased obviously due to tiny broken pieces. The 10-PI-µF and 25-PI-µF have a specific surface area of 102 m2 g-1 and 76 m2 g-1, mesopores of 22-32 nm, and large breakthrough volume of 110 mL/5 mg and 85 mL/5 mg for FQs, while the 50-PI-µF and 100-PI-µF had much lower specific surface area and hardly had retention for FQs. FQs from tap water, egg and milk samples were then extracted by PI-µF SPE, and analyzed by high performance liquid chromatography-fluorescence detector (HPLC-FLD). SPE parameters as type of elution solvent, elution solvent volume, pH value of sample solution, flow rate of sample solution, and breakthrough volume were first optimized in detail. Under the optimal conditions, the PI-µF SPE/HPLC-FLD method showed high recoveries (96.8%-107%), wide linearity (0.05-50 µg L-1, or 0.01-10 µg L-1), high determination coefficients (R2 ≥0.9992), and low limits of detection (LODs, 0.005-0.014 µg L-1). For the real tap water, egg and milk samples, the recoveries and RSDs were 81-119% and 0.8-9.8%, respectively. The results show that porous microfiber up to 25 µm in diameter is a promising solid-phase extraction adsorbent with the lowest flow resistance that can be used for trace organic pollutants in water and food samples.

Identification of Enterococcus spp. from food sources by matrix-assisted laser desorption ionization-time of flight mass spectrometry and characterization of virulence factors, antibiotic resistance, and biofilm formation.

The continuous detection of multi-drug-resistant enterococci in food source environments has aroused widespread concern. In this study, 198 samples from chicken products, animal feces, raw milk, and vegetables were collected in Japan and Egypt to investigate the prevalence of enterococci and virulence characterization. Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) was employed for species identification and taxonomic analysis of the isolates. The results showed that the rates of most virulence genes (efaA, gelE, asa1, ace, and hyl) in the Japanese isolates were slightly higher than those in the Egyptian isolates. The rate of efaA was the highest (94.9 %) among seven virulence genes detected, but the cylA gene was not detected in all isolates, which was in accordance with γ-type hemolysis phenotype. In Enterococcus faecalis, the rate of kanamycin-resistant strains was the highest (84.75 %) among the antibiotics tested. Moreover, 78 % of E. faecalis strains exhibited multi-drug resistance. Four moderately vancomycin-resistant strains were found in Egyptian isolates, but none were found in Japanese isolates. MALDI-TOF MS analysis correctly identified 98.5 % (68/69) of the Enterococcus isolates. In the principal component analysis dendrogram, strains isolated from the same region with the same virulence characteristics and similar biofilm-forming abilities were characterized by clustered distribution in different clusters. This finding highlights the potential of MALDI-TOF MS for classifying E. faecalis strains from food sources.

The fate of Salmonella enterica and Listeria monocytogenes in the pulp of eight native Brazilian and exotic fruits.

Despite the wide variety of native and exotic fruits in Brazil, there is limited understanding of their ability to support pathogens during storage. This study aimed to evaluate the behavior of Salmonella enterica and Listeria monocytogenes inoculated into the pulp of eight fruits native and exotic to Brazil: Jenipapo (Genipa americana L.), Umbu (Spondias tuberosa Arruda), Maná (Solanum sessiliflorum), Cajá-manga (Spondias dulcis), Physalis (Physalis angulata L.), Feijoa (Acca sellowiana), Cupuaçu (Theobroma grandiflorum) (average pH < 3.3) and in a low acidy fruit: Abiu (Pouteria caimito) (pH 6.11). The pathogens were inoculated into the different fruits and stored at 10, 20, 30 and 37 °C for up to 12 h and 6 days, respectively. Among the fruits evaluated, Abiu was the only one that allowed Salmonella growth, showing higher δ-values at 20 and 30 °C (5.6 log CFU/g for both temperatures). For Physalis and Feijoa, there was a small reduction in the pathogen concentration (<1 log-cycle), mainly at 10 and 20 °C, indicating its ability to remain in the matrices. For the other fruits, notable negative δ-values were obtained, indicating a tendency towards microbial inactivation. The survival potential was significantly affected by temperature in Abiu, Maná, Cupuaçu, and Cajá-manga (p < 0.05). The same phenomena regarding δ-value were observed for L. monocytogenes population, with the greatest survival potential observed at 20 °C in Abiu (3.3 log CFU/g). Regarding the exponential growth rates in Abiu, the highest values were observed at 30 and 37 °C, both for Salmonella (4.6 and 4.9 log (CFU/g)/day, respectively) and for L. monocytogenes (2.8 and 2.7 log (CFU/g)/day, respectively), with no significant difference between both temperatures. Regarding microbial inactivation, L. monocytogenes showed greater resistance than Salmonella in practically all matrices. Jenipapo and Umbu were the pulps that, in general, had the greatest effect on reducing the population of pathogens. Furthermore, the increase in storage temperature seems to favor the increase on inactivation rates. In conclusion, Salmonella and L. monocytogenes can grow only in Abiu pulp, although they can survive in some acidic tropical fruits kept at refrigeration and abusive temperatures.

A novel yeast-based biosensor for the quick determination of Deoxynivalenol.

Mycotoxins are commonly found in food materials and severely threaten human health. Antibodies play a key role as a part of immunological techniques in detecting mycotoxins. Therefore, highly specific antibodies and detection techniques against mycotoxins need to be developed for advancements in medical research. In this study, we presented a novel strategy for quickly screening highly specific antigen-binding fragment (Fab) antibodies based on yeast surface display (YSD) and detecting small-molecule compounds based on a YSD biosensor. We constructed a yeast surface display Deoxynivalenol (DON)-Fab library with 105 cfu/mL with a galactose-inducible bidirectional promoter. By conducting efficient magnetic-activated cell sorting and fluorescence-activated cell sorting (MACS/FACS), four kinds of DON-selective yeasts were screened. As Fab@YSD C4# showed high sensitivity, we used it to build a one-pot Fab@YSD chemiluminescence biosensor with DON-BSA@Biotin and Streptavidin-alkaline phosphatase (SA-ALP). This method showed a low operational threshold (LOD = 0.166 pg/mL) and a high population range (linear range = 0.001-132.111 ng/mL) within 40 min, which facilitated the detection of DON with high specificity and better recovery in real samples (wheat, corn, flour, and cornmeal). Our results suggested that the Fab@YSD chemiluminescence biosensor is an inexpensive, reproducible, user-friendly, and sensitive method for detecting DON and may be used to quickly detect other small-molecule contaminants in food items.

A SERS-based point-of-care testing approach for efficient determination of diquat and paraquat residues using a flexible silver flower-coated melamine sponge.

Diquat (DQ) and paraquat (PQ) residues in food are potential hazards to consumers' health. Point-of-care testing (POCT) of them remains challenging. Based on surface-enhanced Raman spectroscopy (SERS) technology, we developed a POCT strategy for DQ and PQ on apple surface and in apple juice. A point-of-use composite was fabricated using a piece of porous melamine sponge (MS) modified with silver nanoflowers (AgNFs), combining the specificity of the SERS fingerprint and the excellent adsorption capacity of MS. Using this dual-functional AgNFs@MS, the on-site determination of the DQ and PQ residues was completed within 3 min without pretreatment. Clear trends were observed between SERS intensity and logarithmic concentrations, with r values from 0.962 to 0.984. The limit of detection of DQ and PQ were 0.14-0.70 ppb in apple juice and on apple surface. This study provides a new point-of-use alternative for rapidly detecting DQ and PQ residues in nonlaboratory settings.

Economic benefit of ecological remediation of mercury pollution in southwest China 2007-2022.

Methylmercury (MeHg) exposure via rice consumption poses health risk to residents in mercury contaminated areas, such as the Wanshan Hg mining area (WSMA) in southwest China. Making use of the published data for WSMA, this study developed a database of rice MeHg concentrations for different villages in this region for the years of 2007, 2012, 2017, and 2019. The temporal changes of human MeHg exposure, health effects, and economic benefits under different ecological remediation measures were then assessed. Results from this study revealed a decrease of 3.88 µg/kg in rice MeHg concentration and a corresponding reduction of 0.039 µg/kg/d in probable daily intake of MeHg in 2019 compared to 2007 on regional average in the WSMA. Ecological remediation measures in this region resulted in the accumulated economic benefits of $38.7 million during 2007-2022, of which 84 % was from pollution source treatment and 16 % from planting structure adjustment. However, a flooding event in 2016 led to an economic loss of $2.43 million (0.38 % of regional total Gross Domestic Product). Planting structure adjustment generates the greatest economic benefits in the short term, whereas pollution source treatment maximizes economic benefits in the long term and prevents the perturbations from flooding event. These findings demonstrate the importance of ecological remediation measures in Hg polluted areas and provide the foundation for risk assessment of human MeHg exposure via rice consumption.

Nanoscale Simulation of Plastic Contaminants Migration in Packaging Materials and Potential Leaching into Model Food Fluids.

Polymers are the most commonly used packaging materials for nutrition and consumer products. The ever-growing concern over pollution and potential environmental contamination generated from single-use packaging materials has raised safety questions. Polymers used in these materials often contain impurities, including unreacted monomers and small oligomers. The characterization of transport properties, including diffusion and leaching of these molecules, is largely hampered by the long timescales involved in shelf life experiments. In this work, we employ atomistic molecular simulation techniques to explore the main mechanisms involved in the bulk and interfacial transport of monomer molecules from three polymers commonly employed as packaging materials: polyamide-6, polycarbonate, and poly(methyl methacrylate). Our simulations showed that both hopping and continuous diffusion play important roles in inbound monomer diffusion and that solvent-polymer compatibility significantly affects monomer leaching. These results provide rationalization for monomer leaching in model food formulations as well as bulky industry-relevant molecules. Through this molecular-scale characterization, we offer insights to aid in the design of polymer/consumer product interfaces with reduced risk of contamination and longer shelf life.

Mycobiota contaminating some market cake samples with reference to their toxin and enzyme.

Fungi can spoil the majority of baked products. Spoilage of cake during storage is commonly associated with fungi. Therefore, this study aimed to assess the quality of different types of cakes sold in the market. The most predominant fungal genera in the tested cake samples (14 samples) were Aspergillus spp., and Penicillium spp. On Potato Dextrose Agar (PDA), the medium fungal total count was 43.3 colonies /g. Aspergillus was the most dominant genus and was isolated from six samples of cake. Aspergillus was represented by 3 species namely, A. flavus, A. niger, and A. nidulans, represented by 13.32, 19.99, and 3.33 colonies /g respectively. On Malt Extract Agar (MEA) Medium, the fungal total count was 123.24 colonies / g. Aspergillus was the most dominant isolated genus from 11 samples of cake and was represented by 5 species, namely, A. flavus, A. niger, A. ochraceous, A. terreus, and A. versicolor (26. 65, 63.29, 3.33, 6.66, and 3.33 colonies / g , respectively). Twenty-four isolates (88.88 %) of the total tested twenty-seven filamentous fungi showed positive results for amylase production. Ten isolates (37.03%) of the total tested filamentous fungi showed positive results for lipase production, and finally eleven isolates (40.74 %) of the total fungal isolates showed positive results for protease production. Aflatoxins B1, B2, G1, G2, and ochratoxin A were not detected in fourteen collected samples of cake. In this study, clove oil was the best choice overpeppermint oil and olive oil for preventing mold development when natural agents were compared. It might be due to the presence of a varietyof bioactive chemical compounds in clove oil, whose major bioactive component is eugenol, which acts as an antifungal reagent. Therefore, freshly baked cake should be consumed within afew days to avoid individuals experiencing foodborne illnesses.

Analysis and removal of bisphenols in recycled plastics using polyethylene glycol.

This study examines the presence of bisphenol A (BPA), S (BPS), F (BPF), and M (BPM) in various recycled plastics readily available on the market (LDPE, HDPE, PET, and PP), in light of European Food Safety Authority (EFSA) limits. Twenty samples of different origin are analyzed, cleaning treatments are applied, and the migration potential of these bisphenols into food is studied. BPM is absent in all samples, but a post-consumer recycled LDPE sample reveals high bisphenol concentrations, raising concerns, reaching 8540 ng/g, 370 ng/g, and 29 ng/g of BPA, BPS, and BPF, respectively. Migration tests show substantial migration of these contaminants into food simulants. Using a cleaning treatment with polyethylene glycol (PEG 400) reduces BPA in LDPE, HDPE, PP, and PET samples by 95%, 99%, 97% and 28%, respectively, highlighting the importance of cleaning treatments across various polymers in plastic recycling. These findings not only protect food safety but addressing environmental challenges associated with plastic recycling.

Determination and health risk assessment of carbamate pesticide residues in date palm fruits (Phoenix dactylifera) using QuEChERS method and UHPLC-MS/MS.

This study aimed to investigate carbamate pesticide residues in different varieties of date palm fruits in the UAE, utilizing UHPLC-MS/MS. For sample preparation and clean-up, the efficiency and performance of different QuEChERS dispersive solid-phase extraction kits were compared. Precision and recovery were assessed at 10 µg kg-1 for the three kits, revealing that Kit 2 demonstrated the best performance. The selected QuEChERS method was validated to detect 14 carbamate residues in 55 date samples. The method exhibited strong linearity with R2 > 0.999 and low LOD (0.01-0.005 µg kg-1) and LOQ (0.003-0.04 µg kg-1). Excellent accuracy (recovery: 88-106%) and precision (RSD: 1-11%) were observed, with negligible matrix effect (- 4.98-13.26%). All samples contained at least one carbamate residue. While most detected residues were below their MRLs, carbosulfan was found in 21 samples, propoxur in 2 samples, and carbofuran in 1 sample above their MRLs. The hazard index (HI) was calculated for carbosulfan, phenmedipham, carbaryl, propoxur, carbofuran, and methomyl to assess potential health risks for date consumers. All HI values were below the safety limit of 1.0, indicating that the consumption of dates does not pose a non-carcinogenic health risk for adults and children.

Dosimetry of human exposure to furan and 2-methylfuran by monitoring urinary biomarkers.

Furan and 2-methylfuran (2-MF) can form during food processing and accumulate in foods at various concentrations depending on processing technology and beverage/meal preparation methods applied prior to consumption. Here, we report a controlled dosimetry study with 20 volunteers (10 male, 10 female) to monitor dietary furan/2-MF exposure. The volunteers followed an eleven-day furan/2-MF-restricted diet in which they consumed freshly prepared coffee brew containing known amounts of furan and 2-MF on two separate occasions (250 mL and 500 mL on days 4 and 8, respectively). Urine was collected over the whole study period and analyzed for key metabolites derived from the primary oxidative furan metabolite cis-2-butene-1,4-dial (BDA) (i.e., Lys-BDA, AcLys-BDA and cyclic GSH-BDA) and the primary 2-MF metabolite acetylacrolein (AcA, 4-oxo-pent-2-enal) (i.e., Lys-AcA and AcLys-AcA). A previously established stable isotope dilution analysis (SIDA) method was utilized. Excretion kinetics revealed two peaks (at 0-2 and 24-36 h) for AcLys-BDA, Lys-BDA, AcLysAcA and LysAcA, whereas GSH-BDA showed a single peak. Notably, women on average excreted the metabolite GSH-BDA slightly faster than men, indicating gender differences. Overall, the study provided further insights into the spectrum of possible biomarkers of furan and 2-methyfuran metabolites occurring in the urine of volunteers after coffee consumption.

Assessment of human health risk concerning edible plants contamination with toxic elements around functional and derelict mines.

Edible plants samples were analysed for non-carcinogenic and carcinogenic human health risks. The elements nickel (Ni), cadmium (Cd), arsenic (As), lead (Pb), chromium (Cr) and mercury (Hg) analysed using atomic absorption spectrophotometer (AAS). The recovery, limit of detection (LOD) and limit of quantification (LOQ) ranged from 75 to 89 %, 0.001-0.003 and 0.003-0.01, respectively. The mean value of Hg (0.34 mg/kg) exceeded the limit of 0.05 mg/kg recommended by World Health Organization (WHO). The estimated daily intake (EDI) of Cd in adults ranged from 7.93 × 10-7 to 1.43 × 10-4 and that of Hg from 0.07 to 1.27 and Cd (0.08 × 10-4) in children. These are below the oral reference doses (RfD). Hazard Quotient (HQ) of Hg in children was 1.92. The elements Hg and As obtained the highest total hazard (THI) index of 2.02 in mango1 and oil palm. Arsenic possessed the highest cancer risk of 4.5 × 10-4 in children and 1.9 × 10-4 in adults. Cancer risk (CR) ranged from low to moderate (10-6-10-4), which is below the limit of 10-3. The total carcinogenic risk (TCR) of the edible plants were above the limit of 10-6. The study identified minimal As and Hg pollution and carcinogenic risks in edible plants.