Corncob-derived biodegradable packaging films: A sustainable solution for raspberry post-harvest preservation.

Plastic food packaging, with its harmful migration of microplastics and nanoplastics into food, presents significant ecological imbalance and human health risks. In this regard, using food and agricultural byproducts as packaging materials reduces environmental and economic concerns and supports their sustainable management. Herein, cellulosic residue from corncob was employed as a renewable source for developing biodegradable packaging films. It was solubilized in ZnCl2 solution, crosslinked with Ca2+ ions, and plasticized with sorbitol to form films and used to improve the shelf-life of raspberries. The optimized film possesses water vapor permeability, tensile strength, and elongation at break of 1.8(4) x10-10 g-1 s-1 Pa-1, 4.7(1) MPa, and 15.4(7)%, respectively. It displays UV-blocking and antioxidant properties and biodegrades within 29 days at 24% soil moisture. It preserves raspberries for 7 and 5 more days at room temperature and refrigeration conditions, respectively, compared to polystyrene film. Overall, more value addition could be envisioned from agricultural residues to minimize post-harvest losses and food waste through biodegradable packaging, which also aids in mitigating plastic perils.

Ultralong luminescence lifetime imaging of edible plant tissue for humidity sensing in food packaging by a smartphone.

The safety of luminescence sensors and probes used in food packaging should be seriously considered, while most luminescence sensors were artificially synthesized with unclear toxicity, and cannot be directly used as indicators that were in contact with food. To overcome this problem, a humidity indicator based on an edible plant tissue was developed without any chemical processing. We found that garlic bulbs could emit significant persistent luminescence after drying at room temperature. The luminescence lifetime decreases from hundreds of milliseconds to tens of milliseconds as humidity increases. The long-lived luminescence could easily be detected through smartphones without any sophisticated instruments. The edible garlic is expected to be used as a humidity indicator in food packaging without worrying about food safety. Furthermore, the interference of scattered light and short-lived fluorescence from foods and packages can be eliminated in time-resolved luminescence imaging, greatly increasing the signal-to-noise ratio.

High-performance carboxymethyl starch/PVA based intelligent packaging films engineered with Cu-Trp nanocrystal as functional compatibilizer.

A spindle-like Cu-based framework (Cu-Trp, Trp = L-Tryptophan) nanocrystal with ammonia-responsiveness was fabricated via simple aqueous solution approach, and it was subsequently explored as a functional compatibilizer of carboxymethyl starch/polyvinyl alcohol (CMS/PVA) blend toward constructing high-performance intelligent packaging films. The results showed that incorporation of Cu-Trp nanocrystal into CMS/PVA blend resulted in significant promotions regarding to the compatibility, mechanical strength (42.92 MPa), UV-blocking (with UV transmittance of only 2.4%), and water vapor barrier effectiveness of the blend film. Besides, the constructed CMS/PVA/Cu-Trp nanocomposite film exhibited superb long-term color stability, favorable antibacterial capacity (over 98.0%) toward both E. coli and S. aureus bacteria, as well as color change ability under ammonia environment. Importantly, the application trial confirmed that the CMS/PVA/Cu-Trp nanocomposite film is capable of visually monitoring shrimp spoilage during storage. These results implied that the CMS/PVA/Cu-Trp nanocomposite film holds tremendous potential as an intelligent active packaging material.

Microscopic Raman-based rapid detection of submicron/nano polypropylene plastics in tea and tea beverages.

Polypropylene (PP) is suitable for a broad range of applications and represents the most extensively utilized plastic in food packaging. Micro- and nano-PP plastics are prevalent categories of microplastics (MPs). However, the majority of MPs particles currently utilized in laboratory studies are man-made polystyrene (PS) spheres, and there has been limited research on micrometer- and nanoscale PP plastic particles. This study aims to employ a top-down approach in crafting micro/nanoparticle (M/NPs) models of PP particles, ensuring their enhanced relevance to real-world environments. Micro/nano PP particles, featuring a negatively charged particle size ranging from 203 to 2101 nm, were synthesized through variations in solution concentration and volume. Simultaneously, the devised MPs model was employed to develop a Raman-based qualitative and quantitative detection method for micro/nano PP particles, considering diverse sizes and concentrations. This method integrates Raman spectroscopy and microscopy to measure PP particles with varying sizes, utilizing the coffee ring effect. The Limit of detection (LOD) for 203 nm PP reached 31.25 µg/mL, while those for 382-2101 nm PP were approximately 3.9 µg/mL. The method underwent quantitative analysis by introducing 203 nm PP nanospheres into real food media (i.e., tea beverages, tea leaves), revealing a minimum LOD of approximately 31.25 µg/mL.

An ammonia-sensitive fluorescence sensor based on polyvinyl alcohol-graphene quantum dots/halloysite nanotubes hybrid film for monitoring fish freshness.

A fluorescent hybrid film composed of nitrogen-doped graphene quantum dots (N-GQDs) loaded on halloysite nanotubes (HNTs) (N-GQDs/HNTs nanocomposite) as a sensitive element and polyvinyl alcohol (PVA) as a film-forming matrix was designed for freshness detection. The PVA-N-GQDs/HNTs hybrid film exhibited significantly enhanced fluorescence attributed to the loading of N-GQDs onto the surface of HNTs through electrostatic interactions and hydrogen bonding, effectively reducing their aggregation. The fluorescence of the hybrid film could be quenched by ammonia via photoinduced electron transfer (PET), with good linearity in the range of 20 ppm to 500 ppm ammonia and a limit of detection (LOD) of 0.63 ppm. In addition, the hybrid film was applied to monitor the freshness of seawater fish and freshwater fish stored at refrigeration and room temperature to evaluate the practicality of this approach. The developed hybrid film showed promise for nondestructive and on-site monitoring of fish spoilage.

Development of dual-channel starch-based film incorporated with betanin@ß-cyclodextrin inclusion complex and berberine for indicating shrimp freshness.

In this study, the ß-cyclodextrin encapsulated betanin (BET@ß-CD) with improved thermal stability and retention as well as the berberine (BBR) with aggregate induced luminescence effect were incorporated into corn amylose (CA) biomatrix to develop colorimetric/fluorescent dual-channel smart film. Results shown that the added functional components were uniformly distributed in the film matrix. The high tensile strength (78.87%), low water solubility (31.15%) and water vapor permeability (1.24 × 10-10 g Pa-1 s-1 m-1) of the film predicted its acceptable stability. It was worth mentioning that the film displayed excellent responsiveness to volatile ammonia (0.025-25 mg/mL) with at least 4 times recyclability. Application experiment demonstrated that the film can achieve macroscopic dynamic monitoring of the freshness of shrimps stored at 25 °C, 4 °C, -20 °C under daylight (red to yellow) and UV light (yellow-green to blue-green). Thus, the study suggests an attractive and effective strategy for constructing dual-mode smart packaging materials for food freshness detection.

Application of poly(L-lactic acid)-based films for equilibrium modified atmosphere packaging of "Kyoho" grapes and its favorable protection for anthocyanins.

Grapes were packaged by different Poly (L-lactic acid)-based packaging films (PLTL-PLEL) and stored at 5 °C for 35 days to investigate the effects of equilibrium modified atmosphere packaging on the quality of "Kyoho" grapes during storage. Changes in physiochemical quality, antioxidant content and senescence of grapes were studied. Furthermore, UPLC-Q-TOF-MS/MS was used to observe and identify key factors influencing the variation of grape anthocyanins under different atmosphere conditions. Alterations in gas components and enzyme activities significantly impacted anthocyanin levels, highlighting oxygen concentration as the primary influence on total anthocyanin levels. The PLTL-PLEL50 packaging resulted in an approximate 5.7% lower weight loss and increased soluble solids by approximately 14.4%, vitamin C, total phenols and flavonoids reaching 60.2 mg/100 g, 8.4 mg/100 g and 7.2 mg/100 g, respectively. This packaging also preserved higher anthocyanin levels, with malvidin-3-glucoside and peonidin-3-glucoside at 0.55 µg/mL and 1.62 µg/mL, respectively, on the 35th day of storage.

Quantitative analysis of molecular interactions in κ-carrageenan-Isovanillin biocomposite for biodegradable packaging and pharmaceutical applications using NMR, TOF-SIMS, and XPS approach.

This study explores the molecular interactions and structural changes in κ-carrageenan crosslinked with isovanillin to create a biocomposite material suitable for hard capsule and bio-degradable packaging applications. Proton Nuclear Magnetic Resonance (1H NMR) spectroscopy revealed chemical changes in the conjugate molecule, indicating improved electronegativity due to intermolecular hydrogen bonding between κ-carrageenan and isovanillin. Time-of-flight Secondary Ion Mass Spectrometry (ToF-SIMS) analysis revealed enhanced ion intensity due to intermolecular interactions, particularly between sulphate and hydrogen ions. X-ray Photoelectron Spectroscopy (XPS) study demonstrated that κ-carrageenan and isovanillin form stronger hydrogen bonds, with a shift in binding energy indicating higher electronegativity. These findings shed light on the molecular mechanisms that underpin the formation of the biocomposite material, as well as its potential for use in hard capsule and biodegradable packaging materials, addressing the need for sustainable alternatives in the pharmaceutical and packaging industries while also contributing to environmental conservation.

Physicochemical properties of active films of rose essential oil produced using soy protein isolate-polyphenol conjugates for cherry tomato preservation.

Soy protein isolate (SPI)-polyphenol conjugates were produced by grafting SPI individually with curcumin, naringenin, and catechin. The resulting conjugates showed better emulsifying properties and were used to develop active films containing rose essential oil. The effect of conjugation on the physicochemical and mechanical properties of these emulsion-based films was evaluated. The results showed that the barrier and mechanical properties of the films were improved when the SPI-polyphenol conjugates were used to emulsify the essential oil; in particular, the SPI-curcumin conjugate showed significant improvement. The improvements on the water vapor and oxygen barrier properties in the films were attributed to the formation of compact structure. Emulsion-based films stabilized by SPI-polyphenol conjugates showed antioxidant and antibacterial activities. They also demonstrated an ability to extend the shelf life of cherry tomatoes, as indicated by better preservation of weight, firmness, and ascorbic acid content.

Impact of light on protective fractions of Cu in white wine: Influence of oxygen and bottle colour.

Cu(II)-organic acid (fraction I) and Cu(I)-thiol (fraction II) complexes can suppress sulfhydryl off-aromas in wine. This study investigated the impact of light exposure on the protective fractions of Cu of bottled white wine. Fluorescent light-exposed Chardonnay with two initial concentrations of dissolved oxygen (0.5 and 10 mg/L) was stored in different coloured bottles and concentrations of Cu fractions and riboflavin, a photo-initiator at 370-440 nm, were measured during 110 days storage. Light-exposed wines with lower oxygen concentrations resulted in a 100-fold decrease in the Cu fraction I half-life, and a 60-fold decrease for Cu fractions I and II combined. The half-life for Cu fraction I decay during light exposure was extended 30-fold with the use of brown compared to flint glass. Light exposure can rapidly exhaust the protective Cu fractions in wine, and bottles with less light transmission below 440 nm can slow this loss.

Applications and characterization of anti-browning enzymatically modified potato starch (EPS) film associated with chitosan (CTS)/L-Cys/citric acid (CA) on fresh-cut potato slices.

This study explores the influence of incorporating L-cysteine (L-Cys), chitosan (CTS), and citric acid (CA) on the enzymatic modification of potato starch (EPS) films to enhance anti-browning properties. Four types of EPS composite films were evaluated for preserving fresh-cut potato slices at low temperatures to inhibit browning. Their thermal, physiochemical, mechanical, and digestibility properties were assessed. Results indicate that the addition of CTS, CA, and L-Cys improved the anti-browning activity of the EPS films by increasing film thickness and reducing water vapor permeability (WVP), oxygen transmission rate (OTR), ultraviolet (UV) transmittance, and tensile strength (TS). Furthermore, these additives improved the film's microstructure, resulting in reinforced intermolecular interactions, increased elongation at break, heightened crystallinity, enhanced thermal stability, and favorable gastrointestinal digestibility. Overall, EPS/CTS/L-Cys/CA composite films show promise as edible packaging materials with effective anti-browning properties.

Investigations on the Diffusion Behavior of Smoke-Associated Aroma Compounds into the Sausage Matrix as Affected by Casing, Caliber, and Packaging.

The aim of the study was to investigate how smoke-associated flavoring substances behave during storage in Frankfurter-type sausages. The diffusion behavior of seven selected aroma substances in the sausage matrix and the influence of the packaging and the casing were examined over a storage period of 28 days. The sausages were cut into uniformly thick layers at defined time intervals and examined by headspace-solid phase microextraction-gas chromatography-mass spectrometry. In general, three different groups could be distinguished: (1) even distribution over the entire product on the first day after smoking; (2) clear concentration gradient from outside to inside on the first day of storage, which leveled out until day 28 of storage; and (3) a clear concentration gradient that remained present throughout the storage period. In addition, only small effects were found in the distribution of flavorings between two types of packaging, selected casing, or different calibers.

Ammonia-Responsive Colorimetric Film of Phytochemical Formulation (Alizarin) Grafted onto ZIF-8 Carrier with Poly(vinyl alcohol) and Sodium Alginate for Beef Freshness Monitoring.

In this study, we devised a photothermally stable phytochemical dye by leveraging alizarin in conjunction with the metal-organic framework ZIF-8 (AL@ZIF-8). The approach involved grafting alizarin into the microporous structure of ZIF-8 through physical adsorption and hydrogen-bonding interactions. AL@ZIF-8 significantly enhanced the photostability and thermostability of alizarin. The nanoparticles demonstrate substantial color changes in various pH environments, showcasing their potential for meat freshness monitoring. Furthermore, we introduced an intelligent film utilizing poly(vinyl alcohol)-sodium alginate-AL@ZIF-8 (PA-SA-ZA) for detecting beef freshness. The sensor exhibited a superior water contact angle (52.34°) compared to the alizarin indicator. The color stability of the film was significantly enhanced under visible and UV light (ΔE < 5). During beef storage, the film displayed significant color fluctuations correlating with TVB-N (R2=0.9067), providing precise early warning signals for assessing beef freshness.

Preparation of sodium alginate modified silver-metal organic framework and application in citric acid/PVA antimicrobial packaging.

Silver-metal organic framework (Ag@MOF) has exhibited outstanding antimicrobial activity in antimicrobial applications, and reducing the biotoxicity associated with silver has become a research priority. In this study, Ag@MOF was initially modified with sodium alginate (SA) to form SA-Ag@MOF. The results showed that SA could control the release of Ag+, reducing the release by about 8% at 24 h, and the biotoxicity was significantly reduced. Finally, SA-Ag@MOF was applied as an antimicrobial agent in citric acid-modified PVA film to develop a novel composite antimicrobial film. When added at 2 MIC, the CA3-M2 film can effectively inhibit the growth of E. coli and S. aureus, and the inhibition rate has reached 98%. For white radish packaging applications, CA3-M2 film inhibited the growth of surface microorganisms, while ensuring moisture and tissue hardness to extend shelf-life up to 7 days. Overall, the strategy conceived here can be a theoretical basis for novel antimicrobial packaging.

Antioxidant and antimicrobial extracts from grape stalks obtained with subcritical water. Potential use in active food packaging development.

In order to valorise winemaking grape stalks, subcritical water extraction at 160 and 180 °C has been carried out to obtain phenolic-rich extracts useful for developing active food packaging materials. Red (R) and white (W) varieties (from Requena, Spain) were used, and thus, four kinds of extracts were obtained. These were characterised as to their composition, thermal stability and antioxidant and antibacterial activity. The extracts were incorporated at 6 wt% into polylactic acid (PLA) films and their effect on the optical and barrier properties of the films and their protective effect against sunflower oil oxidation was analysed. Carbohydrates were the major compounds (25-38%) in the extracts that contained 3.5-6.6% of phenolic compounds, the R extracts being the richest, with higher radical scavenging capacity. Every extract exhibited antibacterial effect against Escherichia coli and Listeria innocua, while PLA films with extracts preserved sunflower oil against oxidation.

Integrating detection and degradation of bisphenol A by photocatalytic fuel cell-driven photoelectrochemical sensor.

To ensure food safety and environmental protection, it is crucial to rapidly identify and remove bisphenol A (BPA), a plasticizer commonly used in the inner lining of food containers and beverage packaging. Here, a photocatalytic fuel cell (PFC)-integrated self-powered photoelectrochemical (PEC) sensor is constructed. Unlike conventional single PEC or PFC sensors, this PFC-integrated PEC sensor relies on not only the difference in Fermi energy levels between photoanode and photocathode but also charge accumulation resulted from the oxidation of BPA by photogenerated holes. Consequently, this sensor achieved a remarkable maximum output power (Pmax) of 8.58 µW cm-2, as well as a high sensitivity, wide linear detection range (0.1-200 µM), low detection limit (0.05 µM), great stability, reproducibility, and real sample detection capability. This work integrates PFC and PEC technologies successfully for the rapid identification and efficient removal of BPA.

Nanolignin-containing cellulose nanofibrils (LCNF)-enabled multifunctional ratiometric fluorescent bio-nanocomposite films for food freshness monitoring.

Herein, the nanolignin-containing cellulose nanofibrils (LCNF)-enabled ratiometric fluorescent bio-nanocomposite film is developed. Interestingly, the inclusion of LCNF in the cellulose-based film enhances the detecting performance of food freshness, such as high sensitivity to biogenic amines (BAs) (limit of detection (LOD) of up to 1.83 ppm) and ultrahigh discernible fluorescence color difference (ΔE = 113.11). The underlying mechanisms are the fluorescence resonance energy transfer (FRET), π - π interaction, and cation - π interaction between LCNF and fluorescein isothiocyanate (FITC), as well as the increased hydrophobicity due to lignin, which increases the interactions of amines with FITC. Its color stability (up to 28 days) and mechanical property (49.4 Mpa) are simultaneously improved. Furthermore, a smartphone based detecting platform is developed to achieve access to food safety. This work presents a novel technology, which can have a great potential in the field of food packaging and safety.

Blueberry anthocyanin based active intelligent wheat gluten protein films: Preparation, characterization, and applications for shrimp freshness monitoring.

The aim of this study was to prepare active intelligent gluten protein films using wheat gluten protein (WG) and apple pectin (AP) as film-forming matrices, and blueberry anthocyanin extract (BAE) as a natural indicator. SEM and FT-IR analyses demonstrated the successful immobilization of BAE in the film matrix by hydrogen bonding interactions and its compatibility with WG and AP. The resultant WG-AP/BAE indicator films demonstrated notable antioxidant activity, color stability, barrier qualities, pH and ammonia response sensitivity, and mechanical properties. Among them, WG-AP/BAE5 exhibited the best mechanical properties (TS: 0.83 MPa and EB: 242.23%) as well as the lowest WVP (3.92 × 10-8 g.m/m2.Pa.s), and displayed high sensitivity to volatile ammonia. In addition, WG-AP/BAE5 showed a color shift from purplish red to green to yellowish green, demonstrating the monitoring of shrimp freshness in real time. Consequently, this study offers a firm scientific foundation for the development of active intelligent gluten protein films and their use in food freshness assessments.

Starch as a smart, cheap, and green gatekeeper for the controlled release of propyl gallate from antioxidant biodegradable packaging films.

Oxidative rancidity of food products and massive consumption of plastic packaging have put the necessity in manufacturing novel antioxidant biodegradable packaging films. A comprehensive investigation was conducted on starch/poly(butylene adipate-co-terephthalate) (PBAT) antioxidant blown films, in which starch acted as a gatekeeper for the controlled release of propyl gallate (PG). PG was well integrated into the matrices and bound to starch molecules by hydrogen bonding. All films showed strong anti-ultraviolet performance, and higher oxygen barrier than the traditional polyethylene film. Increasing starch proportions promoted the swelling of films and the release of PG, thereby causing higher antioxidant activity at the same contact time to free radical solutions. Similar polarity made PG prone to partition and rapid migration into the food simulants with higher ethanol concentration and the high-fat-content peanut butter. The film with 20:80 w/w starch/PBAT proportion and 3% w/w PG content effectively suppressed the oxidation of peanut butter within 300-day storage. Findings demonstrated this strategy for manufacturing starch/PBAT antioxidant films as a long-term active packaging in food industry.

Chemically tailored graphite oxide nanoparticles for improving material properties of canola protein-based films.

Canola protein obtained from canola meal, a byproduct of the canola industry, is an economical biopolymer with promising film-forming properties. It has significant potential for use as a food packaging material, though it possesses some functional limitations that need improvement. Incorporating nanomaterials is an option to enhance functional properties. This study aims to produce canola protein films by integrating GO exfoliated at several oxidation times and weight ratios to optimize mechanical, thermal, and barrier properties. Oxidation alters the C/O ratio and adds functional groups that bond with the amino/carboxyl groups of protein, enhancing the film properties. Significant improvement was obtained in GO at 60 and 120 min oxidation time and 3% addition level. Tensile strength and elastic modulus increased 200% and 481.72%, respectively, compared to control. Control films showed a 37.57 × 10-3 cm3m/m2/day/Pa oxygen permeability, and it was significantly reduced to 5.65 × 10-3 cm3m/m2/day/Pa representing a 665% reduction.