Treatment of supracondylar fractures of the humerus in adults using a novel anatomical locking plate on the anterior distal humerus: a case report.

BACKGROUND: Due to its unique anatomical characteristics, supracondylar fractures of the humerus are often difficult to achieve firm fixation with internal fixation equipment, resulting in delayed functional exercise, often leaving cubitus varus deformity, elbow stiffness, contractures, and other complications. Here, we report an adult patient with a supracondylar fracture of the humerus who underwent internal fixation through an anterior median incision in the humerus with our self-developed anterior anatomical locking plate of the distal humerus. CASE PRESENTATION: A 29-year-old male patient of Chinese ethnicity with trauma-induced right supracondylar fracture of the humerus and multiple soft tissue contusions, without nerve damage, blood vessel damage, or other injuries, underwent an internal incision in our hospital using a new anatomical locking plate for the anterior distal humerus fixed treatment. During the 16-month follow-up period, the patient's elbow range of motion was almost completely restored, functional scores were excellent, and there were no minor or major postoperative complications. CONCLUSION: In this study, we propose a surgical reconstruction strategy for adult patients with supracondylar humeral fractures. Through the anterior median incision of the humerus, open reduction and internal fixation were performed with an anatomic locking plate on the anterior side of the distal humerus to restore and fix the structure of the distal humerus, and satisfactory clinical results were achieved in our case.

Using Next-Generation Sequencing to Understand Infection Prevention in Surgical Treatment of Upper Extremity Fractures-A Prospective Cohort Study.

INTRODUCTION: Postoperative fracture site infection can lead to notable patient morbidity, increase cost of care, and further contribute to healthcare disparities globally. Dogma suggests surgical blades as a vehicle for introducing bacteria into the surgical site; however, there is a paucity of literature to support this claim. This study uses advanced DNA sequencing to detect bacterial DNA on surgical blades used in upper extremity fracture surgeries. METHODS: This was a prospective study, conducted at a high-volume level 1 trauma center. All acute, closed upper extremity fractures requiring surgical stabilization were consecutively enrolled in a prospective fashion. The primary end point was the presence of bacterial DNA on the surgical blade using next-generation sequencing (NGS). At the time of surgery, two blades were sterilely opened. One blade served as the control while the other was used for the initial skin incision. Two negative control blades were opened directly into a sterile container. Two positive control blades were used for skin incision through known infections. All samples were sent for NGS analysis. RESULTS: Forty patients were enrolled in this study. The median age was 33.5 years, and 30% were female; the median body mass index was 26.52. Humerus fractures were the most common injury (N = 17, 42.5%), followed by clavicle fractures (13, 32.5%) and radius/ulna fractures (10, 25.0%). NGS analysis revealed no contamination of test blades used for skin incision. Three control blades tested positive for bacterial DNA. Negative control blades tested negative for bacterial DNA (0/2); the positive control blades resulted positive for bacterial DNA contamination (2/2). CONCLUSION: Surgical blades used for skin incision in the upper extremity are not contaminated with bacterial DNA as analyzed by NGS. This finding challenges previous surgical dogma regarding surgical blade contamination and supports that the same surgical blade can safely be used for deeper dissection. LEVEL OF EVIDENCE: Level II study: IRB approval-IRB#848938.

[Application of external fixator combined with Kirschner wire fixation for oblique and comminuted distal humeral metaphyseal-diaphyseal junction fractures in children].

Objective: To analyze the effectiveness of external fixator combined with Kirschner wire (EF-KW) fixation in the treatment of oblique and comminuted distal humeral metaphyseal-diaphyseal junction (DHMDJ) fractures in children. Methods: A clinical data of 22 children with DHMDJ fractures who met the selection criteria between April 2021 and December 2023 was retrospectively analyzed. All patients were treated with EF-KW fixation. There were 14 boys and 8 girls with an average age of 6.8 years (range, 1.5-12.0 years). The time from injury to operation was 14-38 hours (mean, 24.2 hours). There were 18 cases of comminuted fractures and 4 cases of oblique fractures; and 1 case of median nerve injury and 1 case of radial nerve injury before operation. The occurrence of postoperative complications was recorded. At last follow-up, the function of the affected elbow joint was evaluated according to the Mayo elbow joint function score, and the Baumann's angle (BA) and humero-capitellar angle (HCA) of the affected and healthy sides were recorded and compared. Results: All fractures were successfully treated with closed reduction and no complications such as nerve injury occurred. Superficial infection occurred in 4 cases after operation and healed after symptomatic treatment. The incisions of other patients healed by first intention. All patients were followed up 9-24 months (mean, 13.8 months). At last follow-up, according to the Mayo elbow joint function score, the elbow joint function was rated as excellent in 15 cases, good in 6 cases, and fair in 1 case, with an excellent and good rate of 95.5%. The neurologic injury before operation recovered gradually. X-ray films reexamination showed that all fractures healed, and the healing time of fractures ranged from 29 to 61 days, with an average of 35.6 days. At last follow-up, there was no significant difference in BA and HCA between the healthy side and the affected side ( P>0.05). During follow-up, 1 case developed mild cubitus varus, while the other patients had no serious complications. Conclusion: EF-KW fixation for oblique and comminuted DHMDJ fractures in children has the advantages of less trauma, simple operation, easy reduction, good stability after reduction, low incidence of serious complications, and good elbow functional recovery.

Combining robotics and 3D printing facilitates closed reduction of humeral shaft fractures using a minimally invasive plate as a reduction template: A proof-of-concept study.

BACKGROUND: Minimally invasive percutaneous plate osteosynthesis for humeral shaft fractures (HSFs) has limitations due to malreduction and radiation exposure. To address these limitations, we integrated robotics and 3D printing by incorporating plates as reduction templates. METHOD: The innovative technology facilitated closed reduction of HSFs in the operating theatre using 18 models with cortical marking holes. The dataset of the precontoured plate was imported into 3D planning software for virtual fixation and screw path planning. The models were divided into half to simulate transverse fractures. During the operation, the software generated drilling trajectories for robot navigation, and precise plate installation achieved automatic fracture reduction. RESULTS: The evaluation results of reduction accuracy revealed variations in length, apposition, alignment, and rotation that meet the criteria for anatomic reduction. High interoperator reliabilities were observed for all parameters. CONCLUSIONS: The proposed technology achieved anatomic reduction in simulated bones.

Minimum four-year clinical outcomes after on-table reconstruction technique for Dubberley type III in coronal shear fractures of the capitellum and trochlea: a report of 10 patients.

PURPOSE: Comminuted coronal shear fractures of the distal humerus represent rare injuries and are difficult to treat, especially comminuted capitellum and trochlear fractures (Dubberley Type III). The on-table reconstruction technique of comminuted articular fractures may be an option, although it has not been reported in the coronal shear fracture of the distal humerus. The aim of the present case series is to determine the functional and radiological outcomes of on-table reconstructed Dubberley III fractures. METHODS: A retrospective review was conducted of 10 patients with Dubberley type III fractures in coronal shear fractures of the capitellum and trochlea who underwent an 'on-table' reconstruction technique between January 2009 and October 2019. All patients were evaluated using the disabilities of the arm, shoulder, and hand (DASH) score, American Shoulder and Elbow Surgeons(ASES) score, Mayo Elbow Score Performance Index (MEPI) score and at least 4 years later. RESULTS: All cases achieved union. At the final follow-up, the mean range of elbow motion was 11.5°of flexion contracture and 131.9° of further flexion. The mean DASH score was 21.2 (5.7) points (range 13.3-32.5). The mean ASES score was 88.6 ± 7.4 (range, 77 to 100). The mean MEPI score was 87 (10) points (range 70-100). In complication, partial osteonecrosis of capitellum is developed in one patient. One patient had heterotopic ossification without functional impairment. CONCLUSION: The on-table reconstruction technique can be a reliable option in the surgical treatment of complex distal humerus fractures. This technique allows anatomical reduction of comminuted capitellum and trochlea, with a low risk of avascular necrosis over 4 years of follow-up. LEVEL OF EVIDENCE: Level IV, retrospective case series.

Biomechanical Design Optimization of Distal Humerus Fracture Plates: A Review.

The goal of this article was to review studies on distal humerus fracture plates (DHFPs) to understand the biomechanical influence of systematically changing the plate or screw variables. The problem is that DHFPs are commonly used surgically, although complications can still occur, and it is unclear if implant configurations are always optimized using biomechanical criteria. A systematic search of the PubMed database was conducted to identify English-language biomechanical optimization studies of DHFPs that parametrically altered plate and/or screw variables to analyze their influence on engineering performance. Intraarticular and extraarticular fracture (EAF) data were separated and organized under commonly used biomechanical outcome metrics. The results identified 52 eligible DHFP studies, which evaluated various plate and screw variables. The most common plate variables evaluated were geometry, hole type, number, and position. Fewer studies assessed screw variables, with number and angle being the most common. However, no studies examined nonmetallic materials for plates or screws, which may be of interest in future research. Also, articles used various combinations of biomechanical outcome metrics, such as interfragmentary fracture motion, bone, plate, or screw stress, number of loading cycles to failure, and overall stiffness (Os) or failure strength (Fs). However, no study evaluated the bone stress under the plate to examine bone "stress shielding," which may impact bone health clinically. Surgeons treating intraarticular and extraarticular distal humerus fractures should seriously consider two precontoured, long, thick, locked, and parallel plates that are secured by long, thick, and plate-to-plate screws that are located at staggered levels along the proximal parts of the plates, as well as an extra transfracture plate screw. Also, research engineers could improve new studies by perusing recommendations in future work (e.g., studying alternative nonmetallic materials or "stress shielding"), clinical ramifications (e.g., benefits of locked plates), and study quality (e.g., experimental validation of computational studies).

[Elbow hemiarthroplasty for coronal shear fractures of the distal humerus]. / Ellenbogenhemiprothese bei koronaren Abscherfrakturen des distalen Humerus.

OBJECTIVE: The aim of the operation is to replace the articular surface of the distal humerus in cases of nonreconstructible fractures of the distal humerus. INDICATIONS: Active patients with high functional requirements, in whom weight limitation of total elbow arthroplasty should be avoided. CONTRAINDICATIONS: Contraindications include fractures with irreconstructible epicondyles and/or irreconstructible collateral ligaments, as well as ulnohumeral, or radiohumeral osteoarthritis. SURGICAL TECHNIQUE: Following subcutaneous anterior transposition of the ulnar nerve, surgical dislocation of the elbow joint is achieved through a paratricipital approach with release of the soft tissue structures from the humerus. After resection of the trochlea, the intramedullary canal of the humerus is prepared using rasps in order to implant the hemiprosthesis with retrograde cementing. Finally, the medial and lateral collateral ligaments as well as the flexors and extensors are repaired. POSTOPERATIVE MANAGEMENT: Early functional rehabilitation in a hinged elbow orthosis while avoiding varus/valgus stress after wound healing is completed. RESULTS: Between 2018 and 2022, 18 patients with coronal shear fractures were treated with elbow hemiarthroplasty. The mean Mayo Elbow Performance Score (MEPS) was 79 (70-95) after a mean follow-up of 12 months. The mean range of motion was 99° (70-130°) in extension-flexion and 162° (90-180°) in pronation-supination.

Intercondylar T-Type Distal Humerus Fracture in a 10-Year-Old: A Case Report.

CASE: A 10-year-old, postmenarchal girl presented to the emergency department with a closed, displaced, intercondylar T-type distal humerus fracture. Open reduction and internal fixation was performed 3 days following initial presentation. The patient healed but experienced elbow stiffness in the 7 months following the procedure. Implant removal and capsular release were performed at that time. At the 31-month follow-up, the patient reported satisfactory elbow functionality. CONCLUSION: There is limited literature available discussing optimal management and associated outcomes of intercondylar T-type distal humerus fractures in the young-adolescent population. This report presents a possible method for management of the initial injury and the most common associated complication.

Minimally invasive techniques utilizing the "Joy Stick" method for managing irreducible flexion-type supracondylar fractures of the humerus in older children.

OBJECTIVE: In this study, we investigated the efficacy of percutaneous poking reduction and Kirschner wire fixation in older children with irreducible supracondylar flexion-type fractures of the humerus. METHODS: This retrospective investigation included 27 children, comprising 15 males and 12 females, aged between 10 years and 3 months to 14 years and 11 months, all diagnosed with a flexion-type supracondylar fracture of the humerus within one week of trauma. All patients underwent surgery under general anesthesia. Following unsuccessful manual reduction, percutaneous poking reduction with Kirschner wires was performed under C-arm fluoroscopy to achieve fracture reduction. Following successful reduction, three 2.0 mm Kirschner wires were inserted in a cross pattern to secure the fracture ends. Postoperatively, the elbow joint was immobilized in a functional position with a plaster cast for four weeks. RESULTS: Follow-up in the outpatient department ranged from 9 to 36 months. Clinical functional assessment using Flynn's criteria rated 24 cases as excellent, 2 as good, and 1 as fair, yielding an overall efficacy of 96.3%. No cases of fracture re-displacement, fracture fragment necrosis, or other complications such as nonunion, iatrogenic nerve injury, myositis ossificans, or long-term elbow joint dysfunction were observed during the postoperative follow-up. CONCLUSION: The percutaneous poking reduction and Kirschner wire fixation technique is a simple and reliable procedure for treating irreducible flexion-type supracondylar fractures of the humerus in older children, with minimal trauma. This technique offers substantial stability for the fracture and results in excellent long-term recovery of joint function.

Displaced humeral shaft fractures: Assessment of fracture union and complications following dual plate fixation using an anterior approach.

The humeral bone is subject to torsional forces. In case of displaced shaft fractures, internal fixation remains the standard of care. This retrospective two-center study assessed the fracture union rate and complications after dual 3.5 mm locking compression plate (LCP) fixation using an anterolateral approach. Over a 9-year period, 38 patients underwent surgery in two centers. They had a mean age of 53.7 years (15-97, ± standard deviation (SD) 26) and there were three open fracture cases (7.9 %). The dominant side was affected in 21 cases (55.3 %) and there were 11 polytrauma patients (29 %). Mean operative time was 78 min (40-124, ± 19.8 SD). Patients were treated with dual 3.5 mm LCP fixation (6 screws on either side of the fracture line, anterolateral approach without a tourniquet). The first two orthogonal views showing at least 3 cortical bridges out of 4 determined fracture healing, as assessed by two independent raters. Pre- and postoperative complications were tabulated. Clinical outcomes included range of motion (ROM) and return to activities, while functional outcomes were assessed with the Disability of the Arm Shoulder and Hand (DASH), the Constant score, the Subjective Shoulder Score (SSV) and the Mayo Elbow Performance Score (MEPS). Minimum follow-up was 1 year. Four patients were given a shoulder immobilizer to wear for 3 weeks; immediate mobilization was the standard of care for the other patients. Fracture union was achieved in all cases within a mean of 11.7 weeks (6-28 ± 7.1 SD) without any heterotopic ossification of the brachialis muscle. There were eight patients with preoperative radial nerve palsy and two cases of postoperative palsy. There was one surgical site infection (2.6 %). Return to work for active patients was possible in 87 % of cases within a mean of 23 weeks (6-72 ± 11 SD). The Constant score was 84.6 (35-100, ± 13.4 SD), the SSV score was 80.7 (60-100, ± 8.2 SD), the DASH score was 13.5 (0-38.3, ± 8.8 SD) and the MEPS score was 85 (55-100, ± 11.9 SD). Traditional fixation methods provide little control over torsional forces, leading to non-union rates between 3 % and 12 % and delayed union (12 to 20 weeks). The simplicity of the technique described here, and the short operative time, may help explain the low infection rate. Dual plate fixation makes it possible to use more screws and allows nerve exploration and decompression in case of preoperative nerve palsy. Dual plate fixation to treat humeral shaft fractures is a simple and reliable technique.

Combination of Anatomical Plates and Rotator Cuff Reinforcement for Minimally Invasive Treatment of Greater Tuberosity Fractures of the Humerus.

Greater tuberosity fractures of the humerus can be challenging to manage due to their complex anatomy and the potential for compromised shoulder function. We present a novel technique for treating greater tuberosity fractures utilizing specialized anatomical plates and rotator cuff reinforcement. The technique involves the use of an anatomically T-shaped plate designed specifically for the greater tuberosity region of the humerus, allowing for precise fixation and stability. Additionally, rotator cuff reinforcement is performed using sutures to enhance structural integrity and promote early mobilization. The simplified process is as follows: After administering anesthesia, a 3 cm incision is made along the lateral aspect of the shoulder to precisely expose the fracture site of the greater tuberosity. A suture of size 5 is skillfully threaded through the tough rotator cuff tendon to securely attach the proximal humerus to the anatomical plate after the greater tuberosity has been reduced. Intraoperative fluoroscopy is utilized to verify the accurate positioning of plates and screws. After ensuring everything is correct, the surgery concludes.

Primary Reconstruction Using Fibular Strut Allograft for Distal Humerus Intra-articular Comminuted Open Fracture (AO/OTA13C2, G-A type IIIA): A Case Report.

Distal humerus intra-articular comminuted open fracture is a challenging injury, with nonunion, infection and stiffness considered as major concerns. We report a 58-year-old woman who was admitted to the emergency department from a car accident, sustaining an open wound with severe comminution of distal humerus and complete articular fracture, classified as AO/OTA 13C2 and Gustillo Anderson type IIIA. Debridement and external fixation was done first, followed by open reduction and internal fixation with fibular strut allograft. The patient showed excellent results in radiological and functional outcomes. Level of Evidence: Level V (Therapeutic).

Posterolateral Locked Plate and Percutaneous Medial Screw Fixation for Distal Humerus Fractures in Elderly.

Background: A high incidence of ulnar nerve-related complications has been reported in open reduction and internal fixation for distal humerus fractures (DHFs). To minimise ulnar nerve damage, we used a percutaneous medial screw combined with a posterolateral plate in the elderly. The aim of this study was to evaluate the postoperative complications and functional outcomes of this method. Methods: Data from patients aged over 65 who underwent this surgical procedure for DHFs at a single Level I trauma centre from 2013 to 2021 were extracted. Postoperative complications, reoperations, mean range of motion, Mayo Elbow Performance Index (MEPI) scores and Hand20 scores were retrospectively evaluated. All patients in this study received postoperative rehabilitation by hand therapists at our hospital. Results: We identified 28 patients treated with this method. The mean follow-up period was 8.6 ± 3.7 months. The median intraoperative time was 125 minutes (interquartile range: 105-157 minutes). None of the patients developed ulnar nerve neuropathy, but one patient (3.7%) experienced radial nerve dysfunction. Two patients (7.4%) had nonunion. Implant failure occurred in three patients (11.1%) due to migration of the medial screw. One patient (3.7%) amongst them underwent reoperation. The mean flexion to extension arc was 97 ± 18°, 116 ± 19°, and 116 ± 19° at 1-, 3- and 6-month follow-ups, respectively. According to the MEPI, 20 patients achieved excellent results, seven patients achieved good results and one patient achieved a fair result at the last follow-up. The median Hand20 score was 4.3 (interquartile range: 2.1-14.0) at the 6-month follow-up. Conclusions: The posterolateral plate and medial screw method showed good functional outcomes and few nerve-related complications. This modified method might be a better option for DHFs in elderly patients. Level of Evidence: Level IV (Therapeutic).

Systematic review of humeral shaft fracture (OTA/AO 12) complicated with iatrogenic radial nerve injury.

OBJECTIVES: To compare the iatrogenic radial nerve injury (iRNI) rate of different implant (plate vs. intramedullary nail) and surgical approaches during humeral shaft fracture surgery. METHODS: The online PubMed database was used to search for articles describing iRNI after humeral fracture with a publication date from Jan 2000 to October 2023. The following types of articles were selected: (1) case series associating with adult humeral shaft fracture, preoperative radial nerve continuity, non-pathological fracture and non-periprosthetic fracture; (2) involving humeral shaft (OTA/AO 12) fractures. Articles where we were unable to judge surgical approach or fracture pattern (OTA/AO 12) were excluded. The data were analyzed by SPSS 27.0 and Chi-square test was performed to identify incidence of iRNI associated with different implant and surgical approaches. RESULTS: Fifty-four articles with 5063 cases were included, with 3510 cases of the plate, 830 cases of intramedullary nail and 723 cases of uncertain internal fixation. The incidences of iRNI with plate and intramedullary nail were 5.95% (209/3510) and 2.77% (23/830) (p < 0.05). And iRNI incidences of different surgical approaches were 3.7% (3/82) for deltopectoral approach, 5.74% (76/1323) for anterolateral approach, 13.54% (26/192) for lateral approach and 6.68% (50/749) for posterior approach. The iRNI rates were 0.00% (0/33) for anteromedial MIPO, 2.67% (10/374) for anterolateral MIPO and 5.40% (2/37) for posterior MIPO (p > 0.05). The iRNI rates were 2.87% (21/732) for anterograde intramedullary nail and 2.04% (2/98) for retrograde intramedullary nail (p > 0.05). In humeral bone nonunion surgery, the rate of iRNI was 15.00% (9/60) for anterolateral approach, 16.7% (2/12) for lateral approach and 18.2% (6/33) for posterior approach (p > 0.05). CONCLUSION: Intramedullary nailing is the preferred method of internal fixation for humeral shaft fractures that has the lowest rate of iRNI. Compared with anterolateral and posterior approaches, the lateral surgical approach had a higher incidence of iRNI. The rate of iRNI in MIPO was lower than that in open reduction and internal fixation. LEVEL OF EVIDENCE: Level IV.

Anterolateral Dual Plate Fixation for Distal Metaphyseal-Diaphyseal Junction Fractures of the Humerus: Biomechanical Finite Element Analysis with Clinical Results.

Background: Distal metaphyseal-diaphyseal junction fractures of the humerus are a subset of injuries between humeral shaft fractures and distal intra-articular humerus fractures. A lack of space for distal fixation and the unique anatomy of concave curvature create difficulties during operative treatment. The closely lying radial nerve is another major concern. The aim of this study was to determine whether anterolateral dual plate fixation could be effective for a distal junctional fracture of the humerus both biomechanically and clinically. Methods: A right humerus 3-dimensional (3D) model was obtained based on plain radiographs and computed tomography data of patients. Two fractures, a spiral type and a spiral wedge type, were constructed. Three-dimensional models of locking compression plates and screws were constructed using materials provided by the manufacturer. The experiment was conducted by using COMSOL Multiphysics, a finite element analysis, solver, and simulation software package. For the clinical study, from July 2008 to March 2021, a total of 72 patients were included. Their medical records were retrospectively reviewed to obtain patient demographics, elbow range of motion, Disabilities of the Arm, Shoulder and Hand (DASH) scores, Mayo Elbow Performance Scores (MEPS), and hand grip strength. Results: No fracture fixation construct completely restored stiffness comparable to the intact model in torsion or compression. Combinations of the 7-hole and 5-hole plates and the 8-hole and 6-hole plates showed superior structural stiffness and stress than those with single lateral plates. At least 3 screws (6 cortices) should be inserted into the lateral plate to reduce the load effectively. For the anterior plate, it was sufficient to purchase only the near cortex. Regarding clinical results of the surgery, the range of motion showed satisfactory results in elbow flexion, elbow extension, and forearm rotation. The average DASH score was 4.3 and the average MEPS was 88.2. Conclusions: Anterolateral dual plate fixation was biomechanically superior to the single-plate method in the finite element analysis of a distal junctional fracture of the humerus model. Anterolateral dual plate fixation was also clinically effective in a large cohort of patients with distal junctional fractures of the humerus.

In cases of humeral diaphyseal fractures, is lateral approach surgery without radial nerve exploration as effective and safe as conventional surgery?

BACKGROUND: This study compares the efficacy and safety of lateral approach surgery with and without radial nerve dissection in treating humeral diaphyseal fractures. It assesses clinical, radiological, and complication outcomes, providing a description of the surgical methods and perioperative benefits. METHODS: We retrospectively analyzed data from 71 patients admitted between May 2015 and December 2022 who underwent lateral approach surgery for humeral diaphyseal fractures. Group 1, consisting of 34 patients without radial nerve dissection, and Group 2, comprising 37 patients with radial nerve dissection, were compared. Parameters such as age, gender, fracture side (right/left), fracture type, follow-up time, surgical duration, blood loss, radiological and clinical evaluations (including Shoulder-Elbow range of motion [ROM] and Quick Disabilities of the Arm, Shoulder, and Hand score [Q-DASH]), and complications were examined. Surgical techniques and outcomes were documented. RESULTS: Both groups exhibited comparable distributions in age, gender, fracture types, and follow-up times (p>0.05). Group 1 demonstrated significantly lower surgical duration and blood loss compared to Group 2 (p<0.05 for both). Clinical assessment revealed satisfactory shoulder and elbow ROM within functional limits for all patients, with no instances of infection. Q-DASH scores were similar between groups. Postoperative radial nerve palsy occurred in one patient in Group 1 and three patients in Group 2, with all cases resolving uneventfully during outpatient follow-ups. Radiological assessment confirmed uneventful union in all patients. CONCLUSION: Lateral approach surgery without radial nerve dissection for humeral diaphyseal fractures offers comparable effectiveness and safety to conventional surgery, with potential perioperative advantages such as reduced operation time and blood loss.

Risk factors of poor mid-term shoulder functional outcomes of osteosynthesis using antegrade intramedullary nailing for humeral shaft fractures: a retrospective study with a minimum 5-year follow-up.

BACKGROUND: Osteosynthesis using antegrade intramedullary nailing for humeral shaft fractures yields satisfactory bone union rates; however, it may adversely affect postoperative shoulder function. To date, factors affecting mid- or long-term shoulder functional outcomes following intramedullary nail fixation have not been clarified. In this study, we aimed to identify the risk factors for poor mid-term functional outcomes over 5 years postoperatively following antegrade intramedullary nail osteosynthesis for humeral shaft fractures. METHODS: We retrospectively identified 33 patients who underwent surgery using an antegrade intramedullary nail for acute traumatic humeral shaft fractures and were followed up for at least 5 years postoperatively. We divided the patients into clinical failure and no clinical failure groups using an age- and sex-adjusted Constant score of 55 at the final follow-up as the cutoff value. We compared preoperative, perioperative, and postoperative factors between the two groups. RESULTS: Five of the 33 patients had poor shoulder functional outcomes (adjusted Constant score < 55) at a mean follow-up of 7.5 years postoperatively. Proximal protrusion of the nail at the time of bone union (P = 0.004) and older age (P = 0.009) were significantly associated with clinical failure in the univariate analyses. Multivariate analysis showed that proximal protrusion of the nail (P = 0.031) was a risk factor for poor outcomes. CONCLUSIONS: The findings of this study provide new information on predictive factors affecting mid-term outcomes following osteosynthesis using antegrade nails. Our results demonstrated that proximal protrusion of the nail was significantly associated with poor mid-term functional shoulder outcomes. Therefore, particularly in older adults, it is essential to place the proximal end of the intramedullary nail below the level of the articular cartilage.

Procrustes analysis of a shape of pediatric supracondylar humerus fractures.

Shape of supracondylar fracture of the humeral of pediatric patients is analysed with Procrustes method. XR-images of fractures are considered both in anterio-posterior (AP) view and in a lateral (L) view. Applying Procrustes method for both views mean images are constructed and compared. Variability of shapes is quantified with a shape principal component analysis. Possibility of predictions of typical shape of humeral fracture and its variability using statistical shape analysis offers additional information on injury characteristics important in preoperative planning. Non-parametric tests (permutational and bootstrap) do not indicate statistical difference between Procrustes mean shapes in anterio-posterior and lateral projections. It is shown, however, that AP and L shapes of humeral fractures differ in their variability quantified by shape principal components.