Mid- to long-term outcomes of proximal humerus fractures treated with open reduction, plate fixation, and iliac bone autograft augmentation.

BACKGROUND: Open reduction and internal fixation (ORIF) using locking plates is a widely adopted treatment for displaced proximal humerus fractures. Various augmentation techniques have been developed to enhance the stability of plate fixation. Among these, iliac bone autograft is notable for its advantages over allografts, such as ready availability and the elimination of costs and risks associated with disease transmission. Despite its potential benefits, data on the outcomes of iliac bone autograft augmentation (IBAA) are still limited. This study aims to present the mid- to long-term results of treating proximal humerus fractures with ORIF using locking plates and IBAA. METHODS: The study included 15 patients treated with ORIF and IBAA. We classified fracture patterns using the Neer classification and estimated local bone density via the deltoid tuberosity index. We measured the neck shaft angle (NSA) and humeral head height (HHH) on both immediate postoperative and most recent X-ray images to assess the maintenance of reduction. Clinical outcomes were evaluated using the DASH (Disabilities of the Arm, Shoulder, and Hand) and Constant scores. RESULTS: The average follow-up duration was 59.56 months, ranging from 24 to 93 months. A majority of fractures were classified as four-part (53%). The average immediate and late postoperative NSAs were 132.6±8.19 and 131.6±7.32 degrees, respectively. The average HHH on the immediate postoperative and latest follow-up images were 16.46±6.07 and 15.10±5.34, respectively. None of the patients exhibited any radiological signs of avascular necrosis or loss of reduction at the latest follow-up. The mean postoperative Constant and DASH scores at the latest follow-up were 79.6 and 11.5, respectively. CONCLUSION: Our findings suggest that ORIF with IBAA is an effective method for managing three- or four-part proximal humerus fractures, yielding excellent outcomes.

Fluoroscopy guided teardrop technique for open trans-muscular iliac screw placement and open reduction maneuvers during modified triangular spinopelvic fixation for unstable U-shaped sacral and tile C pelvic traumas: technical note.

Unstable traumas of the spinopelvic junction, which include displaced U-shaped sacral fractures (Roy-Camille type 2 and type 3) and Tile C vertical shear pelvic ring disruptions, occur in severe traumas patients following high speed traffic accident or fall from a height. These unstable traumas of the spinopelvic junction jeopardize one's ability to stand and to walk by disrupting the biomechanical arches of the pelvis, and may also cause cauda equina syndrome. Historically, such patients were treated with bed rest and could suffer a life-long burden of orthopedic and neurological disability. Since Schildhauer pioneer work back in 2003, triangular spinopelvic fixation, whether it is performed in a percutaneous fashion or by open reduction and internal fixation, allows to realign bone fragments of the spinopelvic junction and to resume walking within three weeks. Nevertheless, such procedure remains highly technical and it not encountered very often, even for spine surgeons working in high-volume level 1 trauma centers. Hence, this visual technical note aims to provide a few tips to guide less experience surgeons to complete this procedure safely.

Comparison of SHD-IBG and PVIBGT in ONFH including mechanical and pathological analysis of failure cases.

Currently, there is a lack of relevant research on the efficacy difference between SHD combined with IBG and PVIBGT in the treatment of osteonecrosis of the femoral head(ONFH). Firstly, this study intends to compare the effectiveness of surgical hip dislocation combined with impacting bone grafts (SHD-IBG) and pedicled vascularised iliac bone graft transfer (PVIBGT) in treating ONFH. And the study investigates patients who suffered from hip preservation failures from both groups to better comprehend failure reasons. 30 patients (34 hips) with ARCO stage IIIA femoral head necrosis were selected between January 2012 and July 2022. They were divided into group A(SHD-IBG) and group B (PVIBGT) according to different surgical methods. Firstly, compared the 1-year effect between SHD-IBG and PVIBGT at 1 year postoperatively; Secondly, assessed the medium and long-term efficacy of SHD-IBG hip preservation treatment; Lastly, based on study of the femoral head removed from patients with hip preservation failure in the two groups, the reasons for the failure of hip preservation were comprehensively analyzed in the two groups. Group A: 11 males (13 hips), 4 females (4 hips);Group B: 9 males (11 hips), 6 females (6 hips).Firstly, the average Harris scores of the two groups at 1 year after surgery: preoperative: 70.7, 1 year after surgery: 78.9 in group A; preoperative: 69.5, 1 year after surgery: 81.5 in group B. The differences were statistically significant (P < 0.05).Compared to the preoperative period, quantitative analysis by DCE-MRI showed an increase in perfusion in the necroticarea and an improvement in hyperperfusion in the repair-responsive area one year after the surgery. Secondly, in group A, the hip preservation rate was 88.2% at 2.5-11 (average of 77 months) years of follow-up, and the mean Harris score at the last follow-up was 73.2.Semi-quantitative analysis of postoperative DCE-MRI showed that the perfusion curves of necrotic and repaired areas were similar to those of the normal area. This suggests the instability within the femoral head had been effectively improved, and the perfusion had partially recovered. Thirdly, according to Micro-CT and pathologica studies of patients with hip preservation failure in these two groups, all these patients' femoral head was significantly collapsed and deformed. Their trabeculae was thin and partially disorganized, with fractures in the subchondral bone and separation of the cartilage from the subchondral bone. The necrotic areas had sparse trabeculae, disorganized arrangement, loss of continuity, and disappearance of cells in the trabecular traps. The necrotic area was covered with fibrous tissue, and partial restoration was observed in the repair area. Mechanical finite element analysis showed that the maximum equivalent force was observed in the weight- bearing area and the cortical bone surrounding the shaft of femurand. The result of DCE-MRI showed that the repair reaction area exhibited abnormal hyperperfusion. In this study, the efficacy of SHD-IBG and PVIBGT was compared at 1 year after operation, and the long-term follow-up of SHD-IBG was 2.5-11 (mean 77 months) years, combined with DCE-MRI results, we found that the short-term effect of PVIBGT was more significant than that of SHD-IBG. SHD-IBG can achieve satisfactory hip preservation in the medium and long term follow-up.

Effect of different lumbar-iliac fixation and sacral slope for Tile C1.3 pelvic fractures: a biomechanical study.

BACKGROUND: Lumbar-iliac fixation (LIF) is a common treatment for Tile C1.3 pelvic fractures, but different techniques, including L4-L5/L5 unilateral LIF (L4-L5/L5 ULIF), bilateral LIF (BLIF), and L4-L5/L5 triangular osteosynthesis (L4-L5/L5 TOS), still lack biomechanical evaluation. The sacral slope (SS) is key to the vertical shear of the sacrum but has not been investigated for its biomechanical role in lumbar-iliac fixation. The aim of this study is to evaluate the biomechanical effects of different LIF and SS on Tile C1.3 pelvic fracture under two-legged standing load in human cadavers. METHODS: Eight male fresh-frozen human lumbar-pelvic specimens were used in this study. Compressive force of 500 N was applied to the L4 vertebrae in the two-legged standing position of the pelvis. The Tile C1.3 pelvic fracture was prepared, and the posterior pelvic ring was fixed with L5 ULIF, L4-L5 ULIF, L5 TOS, L4-L5 TOS, and L4-L5 BLIF, respectively. Displacement and rotation of the anterior S1 foramen at 30° and 40° sacral slope (SS) were analyzed. RESULTS: The displacement of L4-L5/L5 TOS in the left-right and vertical direction, total displacement, and rotation in lateral bending decreased significantly, which is more pronounced at 40° SS. The difference in stability between L4-L5 and L5 ULIF was not significant. BLIF significantly limited left-right displacement. The ULIF vertical displacement at 40° SS was significantly higher than that at 30° SS. CONCLUSIONS: This study developed an in vitro two-legged standing pelvic model and demonstrated that TOS enhanced pelvic stability in the coronal plane and cephalad-caudal direction, and BLIF enhanced stability in the left-right direction. L4-L5 ULIF did not further improve the immediate stability, whereas TOS is required to increase the vertical stability at greater SS.

A study on the morphology of iliac crest based on the objectives of jaw bone defect reconstruction.

OBJECTIVES: to understand the morphological characteristics of iliac crest and provide advice and assistance for jaw bone reconstruction with iliac bone flap by evaluating the thickness and curvature of iliac crest. MATERIALS AND METHODS: 100 patients who had taken Spiral CT of the Abdominal region before surgeries between 2020 and 2022 were included in this study. 3D reconstruction images of the iliac bones were created. 5 vertical planes perpendicular to the iliac crest were made every 2 cm along the centerline of the iliac crest (VP2 ~ VP10). On these vertical planes, 4 perpendicular lines were made every 1 cm along the long axis of the iliac crest (D1 ~ D4). The thicknesses at these sites, horizontal angle (HA) of iliac crest and the distance between inflection point and the central point of anterior superior iliac spine (DIA) were measured. RESULTS: The thickness of iliac bone decreased significantly from D1 ~ D4 on VP6 ~ VP10 and from VP2 ~ VP10 on D3 and D4 level (P<0.05). HA of iliac crests was 149.13 ± 6.92°, and DIA was 7.36 ± 1.01 cm. Iliac bone thickness, HA and DIA had very weak or weak correlation with patient's age, height and weight. CONCLUSIONS: The average thicknesses of iliac crest were decreased approximately from front to back, from top to bottom. The thickness and curvature of the iliac crest were difficult to predict by age, height and weight. CLINICAL RELEVANCE: Virtual surgical planning is recommended before jaw bone reconstruction surgery with iliac bone flap, and iliac crest process towards alveolar process might be a better choice.

3D CT modeling demonstrates the anatomic feasibility of S1AI screw trajectory for spinopelvic fixation in neuromuscular scoliosis.

PURPOSE: In patients with neuromuscular scoliosis undergoing posterior spinal fusion, the S2 alar iliac (S2AI) screw trajectory is a safe and effective method of lumbopelvic fixation but can lead to implant prominence. Here we use 3D CT modeling to demonstrate the anatomic feasibility of the S1 alar iliac screw (S1AI) compared to the S2AI trajectory in patients with neuromuscular scoliosis. METHODS: This retrospective study used CT scans of 14 patients with spinal deformity to create 3D spinal reconstructions and model the insertional anatomy, max length, screw diameter, and potential for implant prominence between 28 S2AI and 28 S1AI screw trajectories. RESULTS: Patients had a mean age of 14.42 (range 8-21), coronal cobb angle of 85° (range 54-141), and pelvic obliquity of 28° (range 4-51). The maximum length and diameter of both screw trajectories were similar. S1AI screws were, on average, 6.3 ± 5 mm less prominent than S2AI screws relative to the iliac crests. S2AI screws were feasible in all patients, while in two patients, posterior elements of the lumbar spine would interfere with S1AI screw insertion. CONCLUSION: In this cohort of patients with neuromuscular scoliosis, we demonstrate that the S1AI trajectory offers comparable screw length and diameter to an S2AI screw with less implant prominence. An S1AI screw, however, may not be feasible in some patients due to interference from the posterior elements of the lumbar spine.

Treatment of non-hypertrophic pseudoarthrosis of long bones with a Tissue Engineered Product loaded with autologous bone marrow-derived Mesenchymal Stromal Cells: Results from a phase IIa, prospective, randomized, parallel, pilot clinical trial comparing to iliac crest autograft.

BACKGROUND: Atrophic pseudoarthrosis is a serious complication with an incidence of 5-10 % of bone fractures located in the diaphysis of long bones. Standard treatments involve aggressive surgical procedures and re-interventions requiring the use of autografts from the iliac crest as a source of bone-forming biological activity (Standard of Care, SoC). In this context, regenerative ex vivo expanded osteogenic cell-based medicines could be of interest. Particularly, Mesenchymal Stromal Cells (MSC) offer new prospects to promote bone tissue repair in pseudoarthrosis by providing biological activity in an osteoconductive and osteoinductive environment. METHODS: We conducted a phase IIa, prospective, randomised, parallel, two-arms, open-label with blinded assessor pilot clinical trial to compare SoC vs. a tissue-engineered product (TEP), composed of autologous bone marrow (BM)-derived MSCs loaded onto allogeneic decellularised, lyophilised spongy bone cubes, in a cohort of 20 patients with non-hypertrophic pseudoarthrosis of long bones. Patients were followed up for 12 months. Radiological bone healing was evaluated by standard X-ray and computed tomography (CT) scanning. Quality of life was measured using the EUROQOL-5D questionnaire. RESULTS: Ten patients were randomized to TEP and 10 to SoC with iliac crest autograft. Manufacturing of TEP was feasible and reproducibly achieved. TEP implantation in the bone defect was successful in all cases and none of the 36 adverse events (AE) reported were related to the treatment. Efficacy analyses were performed in the Full Analysis Set (FAS) population, which included 17 patients after 3 patients withdrew from the study. The degree of consolidation, estimated by measuring Hounsfield units (HU) on CT, showed no significant differences between the two treatment groups at 12 months post treatment (main efficacy variable) (p = 0.4835) or at 6 months. CONCLUSIONS: Although only a small number of patients were included in our study, it is notable that no significant differences were observed between the experimental treatment and SoC, thus suggesting TEP as an alternative where autograft is not available or contraindicated.

En bloc resection and iliac crest bone grafting for giant cell tumor of the finger.

A case of a rapidly progressing giant cell tumor of the middle phalanx is presented. The patient underwent en bloc resection with iliac crest grafting and distal interphalangeal fusion. Surgical technique and patient's functional outcomes are described.

Transiliac-Shortening Osteotomy to Treat Ischial Pressure Injury due to Fixed Pelvic Obliquity: A Case Report.

CASE: A 17-year-old adolescent boy with Gross Motor Function Classification System 5 cerebral palsy and neuromuscular scoliosis underwent posterior spinal fusion and segmental spinal instrumentation from T3 to the pelvis. He developed a right ischial pressure injury a few months postoperatively, which persisted despite nonoperative measures. He subsequently underwent an ipsilateral transiliac-shortening osteotomy 16 months after spinal surgery to treat his residual pelvic obliquity and the ischial pressure injury, which healed completely. At the 1-year follow-up visit, there were no further signs of pressure injury. CONCLUSION: This case report describes transiliac-shortening osteotomy as a viable treatment option for non-healing ischial pressure injuries secondary to fixed pelvic obliquity.

A comparative study of volar locking-plate fixation with corticocancellous and pure cancellous bone grafts for scaphoid nonunion with dorsal intercalated segmental instability secondary to scaphoid humpback deformity.

INTRODUCTION: Bone grafts for scaphoid nonunion with deformity include cortcicocancellous or pure cancellous bone grafts. This study compared the outcomes between two types of bone grafts when employing a volar locking-plate in patients with scaphoid nonunion with dorsal intercalated segmental instability (DISI). PATIENTS AND METHODS: This retrospective study included 34 patients with scaphoid nonunion and DISI due to humpback deformity treated between March 2017 and January 2022. Two types of bone grafts were obtained from iliac crest. Twenty of the corticocancellous (CC) group underwent a wedge-shaped graft, while 14 patients of the pure cancellous (C-only) group received graft chips. In both groups, a 1.5-mm anatomically pre-contoured locking plate was used for fixation. Radiographic evaluations included the union rate and carpal alignment including scapholunate angle (SLA), radiolunate angle (RLA), intrascaphoid angle (ISA) and scaphoid height to length ratio (HLR). Clinical assessments encompassed wrist range-of-motion, grip strength, and patient-reported outcomes. RESULTS: Nineteen of the 20 patients in the CC group and 12 of the 14 patients in the C-only group respectively, achieving osseous union. The mean follow-up period in CC group was 14.7 (range, 12 ∼ 24) months and that in C-only group was 12.6 (range, 12 ∼ 15) months. Postoperatively, there were no significant intergroup differences of radiographic parameters including SLA (CC; 49.9° ± 6.7° vs. C-only; 48.9° ± 3.5°, P = 0.676), RLA (1.7° ± 6.4° vs. 2.4° ± 3.3°, P = 0.74), ISA (36° ± 7.5° vs. 36.6° ± 12.2°, P = 0.881), and HLR (0.54 ± 0.09 vs. 0.53 ± 0.05, P = 0.587). Clinical outcomes, including the flexion-extension arc (137° ± 30° vs. 158° ± 33°, P = 0.122), grip strength (93.4 % ± 15.4% vs. 99.5 % ± 16.7 %, P = 0.39), Quick Disabilities of the Arm, Shoulder, and Hand scores (11.2 ± 8.3 vs. 12.5 ± 7.7, P = 0.74) and Mayo Wrist Scores (81.2 ± 13.1 vs. 89 ± 11.4, P = 0.242) also showed no significant intergroup differences. CONCLUSIONS: Volar locking-plate fixation with pure cancellous bone grafts achieved outcomes comparable to those achieved with corticocancellous bone grafts in scaphoid nonunion with deformity, possibly due to the biomechanical advantages of the volar plate to provide structural supports.

Diaphyseal giant cell tumour of mid-shaft tibia.

SummaryGiant cell tumours of bone are benign and locally aggressive tumours that usually occur in young adults and at the epiphysial locations after physeal closure. Occurrence outside of epiphysial locations and appearance in geriatric patients is rare. We report a case of a woman in her late 60s with a giant cell tumour of the mid-shaft of the right tibia. Extended curettage and biological reconstruction were performed with autologous double-barrel fibular struts and tri-cortical iliac crest bone grafting. At the 28-month follow-up examination, we noted full bony union at both ends with successful consolidation of the fibular struts, and importantly, no evidence of recurrence or other complications was observed.

Bone turnover prediction in patients with chronic kidney disease (CKD) undergoing hemodialysis using shortened dynamic 18F-NaF PET/CT Ki-Patlak.

This study investigated whether Ki-Patlak derived from a shortened scan time for dynamic 18F-NaF PET/CT in chronic kidney disease (CKD) patients undergoing hemodialysis can provide predictive accuracy comparable to that obtained from a longer scan. Twenty-seven patients on chronic hemodialysis, involving a total of 42 scans between December 2021 and August 2023 were recruited. Dynamic 18F-NaF PET/CT scans, lasting 60-90 min, were immediately acquired post-injection, covering the mid-twelfth thoracic vertebra to the pelvis region. Ki-Patlak analysis was performed on bone time-activity curves at 15, 30, 45, 60, and 90 min in the lumbar spine (L1-L4) and both anterior iliac crests. Spearman's rank correlation (rs) and interclass correlation coefficient were used to assess the correlation and agreement of Ki-Patlak between shortened and standard scan times. Bone-specific alkaline phosphatase (BsAP) and tartrate-resistant acid phosphatase isoform 5b (TRAP5b) were tested for their correlation with individual Ki-Patlak. Strong correlations and good agreement were observed between Ki-Patlak values from shortened 30-min scans and longer 60-90-min scans in both lumbar spine (rs = 0.858, p < 0.001) and anterior iliac crest regions (rs = 0.850, p < 0.001). The correlation between BsAP and Ki-Patlak in the anterior iliac crests was weak and statistically insignificant. This finding suggests that a proposed shortened dynamic 18F-NaF PET/CT scan is effective in assessing bone metabolic flux in CKD patients undergoing hemodialysis, offering a non-invasive alternative approach for bone turnover prediction.

Reconstruction of the Medial Malleolus With Iliac Crest Autograft After Traumatic Loss: A Case Report.

CASE: A 19-year-old woman sustained an open ankle fracture with complete destruction of the left medial malleolus and significant soft-tissue loss. After temporizing external fixation and coverage with a rotational posterior tibial artery perforator flap, the medial malleolus was reconstructed with an autologous iliac crest bone graft and direct repair of the deltoid ligament. The patient achieved excellent improvement in functional outcomes at 21 months with adequate restoration of ankle motion. CONCLUSION: This case shows reconstruction of the medial malleolus with autologous iliac crest bone graft after traumatic loss can be a viable treatment option for young patients.

Comparison of Three Grafting Options for Anterior Cervical Corpectomy and Fusion: A Retrospective 3-Arms Case Control Study.

BACKGROUND: Anterior cervical corpectomy and fusion achieves foraminal radicular and central medullary decompression and spinal stabilization in staged lesions. Many bone graft materials have been developed for the reconstruction of cervical lordosis and the restoration of intervertebral height after corpectomy. The PolyEtherKetoneEtherKetoneKetone (PEKEKK) is a semicrystalline thermoplastic polymer that can be reinforced with carbon fibers to create long and highly fenestrated rectangular cervical cages for corpectomy. This study aimed to evaluate the radiological outcomes of an innovative PEKEEKK cage compared with others grafting options. METHODS: Forty-five consecutive patients who underwent surgery with PEKEKK cages between 2017 and 2019 at a spine institution, were matched with 15 patients with a titanium mesh cylindrical cage (TMC) and 15 patients with a tricortical structural iliac bone graft. The restoration of vertebral height and cervical lordosis postoperatively, and subsidence of the construct were evaluated. Complications were reported. RESULTS: The minimal follow-up was 5.1±2years. A better, but nonsignificant, postoperative gain in height was observed for PEKEKK (+8.1 ± 20%) and TMC cages (+8.2 ± 16%) than for iliac crest autograft reconstruction (+2.3 ± 15%, P = 0.119). The mean subsidence at the last follow-up was greater for TMC cages (-10.2 ± 13%), but was not significant, with -6.1 ± 10% for PEKEKK cages and -4.1 ± 7% for iliac crest autografts (P = 0.223). The gain in segmental cervical lordosis was significant (P < 0.001) and remained stable in all the groups. CONCLUSIONS: Although an improvement in radiologic anatomical parameters can be achieved with all cage groups, the PEKEKK cage can be considered as a safe alternative for reducing subsidence.

[Two-Stage Reconstruction in Bony Finger Joint Defects - Long-Term Results]. / Zweizeitige Arthrodese bei knöchernen Fingergelenkdefekten ­ Langfristige Ergebnisse.

BACKGROUND: Bony defects in finger injuries and infections impose high demands on their treatment due to the close anatomic relationships. Ideally, the injuries are entirely treated in emergency care. Due to the mechanism of the accident, contaminated and compromised soft tissues are often present and set limits to single-stage treatment. We present the long-term subjective and functional results after two-stage reconstruction of bony finger joint defect injuries. PATIENTS AND METHODS: Over a period of 15 years, a total of 40 patients with 43 fingers were treated due to a defect injury in the phalanges. Initially, the finger was stabilised with Kirschner wires after debridement. After consolidation of the soft tissue, the bone was reconstructed in a subsequent operation by interposition of an iliac crest graft. Complications occurred in 9 patients. Twenty-five patients with 27 fingers were followed up for 10.3 years. Range of motion, length of the affected finger, and grip force, each in relation to the contralateral extremity, were recorded. In addition to a subjective assessment of the global result, the daily function was determined by means of the Disabilities of the Arm, Shoulder and Hand (DASH) questionnaire. RESULTS: Significant differences compared with the contralateral extremity (p<0.05) were found in length (70 mm; 91.0%) and total mobility of the affected finger (95°; 46.0%), hand span when the thumb was involved (202.5 mm; 93.4%), and power grip when one of the fingers was injured (30 kg; 84.1%). The DASH score was 4.2 points (0-55.8). Subjectively, 88% of patients were satisfied with the treatment outcome. CONCLUSION: In case of contaminated and compromised soft tissues, the two-stage treatment of bony defect injuries in finger joints by arthrodesis of the joint is a reliable treatment strategy. In the long run, it results in a very satisfactory function of the hand in everyday life although significant differences have been measured compared with the contralateral extremity.

The Influence of Radiographic Parameter on the S2 Alar-Iliac Screw Virtual Trajectory in Degenerative Lumbar Scoliosis Patients: A Computed Tomography Study.

OBJECTIVE: S2 alar-iliac (S2AI) screw had been widely used in the pelvic fusion for degenerative lumbar scoliosis (DLS) patients. However, whether S2AI screw trajectory was influenced by sagittal profile in DLS patients had not been comprehensively investigated. The objective of this study was to evaluate the associations between the optimal S2 alar-iliac (S2AI) screw trajectory and sagittal spinopelvic parameters in DLS patients. METHODS: Computed tomography (CT) scans of pelvis were performed in 47 DLS patients for three-dimensional reconstruction of S2AI screw trajectory from September 2019 to November 2021. Five S2AI screw trajectory parameters were measured in CT reconstruction images, including: 1) angle in the transverse plane (Tsv angle); 2) angle in the sagittal plane (Sag angle); 3) maximal screw length; 4) screw width; and 5) skin distance. The lumbar Cobb angle, lumbar apical vertebral translation (AVT); global kyphosis (GK); thoracic kyphosis (TK); lumbar lordosis (LL); sagittal vertical axis (SVA); sacral slope (SS); pelvic tilt (PT); and pelvic incidence (PI) were measured in standing X-ray films of the whole spine and pelvis. RESULTS: Both Tsv angle and Sag angle had significant positive associations with SS (p < 0.05) but negative associations with both PT (p < 0.05) and LL (p < 0.05) in all cases. Patients with SS less than 15° had both smaller Tsv angle and Sag angle than those with SS equal to or more than 15° (p < 0.05). The decreased LL would lead to the backward rotation of the pelvis, resulting in a more cephalic and less divergent trajectory of S2AI screw in DLS patients. CONCLUSIONS: For DLS patients with lumbar kyphosis, spine surgeons should avoid both excessive Tsv and Sag angles for S2AI screw insertion, especially when using free-hand technique.

Clinical Outcomes and Graft Resorption After Metal-Free Bone Block Suture Tape Cerclage Fixation for Recurrent Anterior Shoulder Instability: A Computed Tomography Analysis.

BACKGROUND: Glenoid reconstruction with a bone block for anterior glenoid bone loss (GBL) has shown excellent outcomes. However, fixation techniques that require metal implants are associated with metal-related complications and bone graft resorption. HYPOTHESIS: Arthroscopic glenoid reconstruction using a tricortical iliac crest bone graft (ICBG) and metal-free suture tape cerclage fixation can safely and effectively restore the glenoid surface area in patients with recurrent anterior shoulder instability and anterior GBL. STUDY DESIGN: Case series; Level of evidence, 4. METHODS: Adult patients (≥18 years) of both sexes with recurrent anterior shoulder instability and anterior GBL ≥15% were enrolled. These patients underwent arthroscopic glenoid reconstruction with ICBGs and metal-free suture tape cerclage fixation. The effectiveness and clinical outcomes with this technique were evaluated at 24 months using functional scores. Resorption of the graft articular surface was assessed by computed tomography, with the graft surface divided into 6 square areas aligned in 2 columns. Descriptive analysis was conducted. RESULTS: A total of 23 consecutive patients met inclusion criteria (22 male, 1 female; mean age, 30.5 ± 7.9 years). The mean preoperative GBL was 19.7% ± 3.4%, and there were 15 allograft and 8 autograft ICBGs. All patients exhibited graft union at 3 months. The median follow-up was 38.5 months (interquartile range, 24-45 months). The Western Ontario Shoulder Instability Index, Rowe, Constant-Murley, and Subjective Shoulder Value scores improved from preoperatively (35.1%, 24.8, 83.1, and 30.9, respectively) to postoperatively (84.7%, 91.1, 96.0, and 90.9, respectively) (P < .001). No differences in clinical scores were observed between the graft types. One surgical wound infection was reported, and 2 patients (8.7% [95% CI, 2.4%-26.8%]) required a reoperation. The mean overall glenoid surface area increased from 80.3% ± 3.5% to 117.0% ± 8.3% immediately after surgery before subsequently reducing to 98.7% ± 6.2% and 95.0% ± 5.7% at 12 and 24 months, respectively (P < .001). The mean graft resorption rate was 18.1% ± 7.9% in the inner column and 80.3% ± 22.4% in the outer column. Additionally, 3 patients treated with an allograft (20.0% [95% CI, 7.1%-45.2%]), including the 2 with clinical failures, exhibited complete graft resorption at the last follow-up. CONCLUSION: Arthroscopic glenoid reconstruction using an ICBG and metal-free suture tape cerclage fixation was safe and effective, yielding excellent clinical outcomes. Resorption of the graft articular surface predominantly affected the nonloaded areas beyond the best-fit circle perimeter.

Preoperative supine pelvic incidence predicts standing pelvic incidence following S2AI fixation in patients with adult spinal deformity: a prospective study.

STUDY DESIGN: A prospective study. OBJECTIVE: The aim of this study was to investigate the PI change in different postures and before and after S2­alar­iliac (S2AI) screw fixation, and to investigate whether pre-op supine PI could predict post-op standing PI. Previous studies have reported PI may change with various positions. Some authors postulated that the unexpected PI change in ASD patients could be due to sacroiliac joint laxity, S2-alar-iliac (S2AI) screw placement, or aggressive sagittal cantilever technique. However, there was a lack of investigation on how to predict post-op standing PI when making surgical strategy. METHODS: A prospective case series of ASD patients undergoing surgical correction with S2AI screw placement was conducted. Full-spine X-ray films were obtained at pre-op standing, pre-op supine, pre-op prone, as well as post-op standing postures. Pelvic parameters were measured. Spearman correlation analysis was used to determine relationships between each parameter. RESULTS: A total of 83 patients (22 males, 61females) with a mean age of 58.4 ± 9.5 years were included in this study. Pre-op standing PI was significantly lower than post-op standing PI (p = 0.004). Pre-op prone PI was significantly lower than post-op standing PI (p = 0.001). By contrast, no significant difference was observed between pre-op supine and post-op standing PI (p = 0.359) with a mean absolute difference of 2.2° ± 1.9°. Correlation analysis showed supine PI was significantly correlated with post-op standing PI (r = 0.951, p < 0.001). CONCLUSION: This study revealed the PI changed after S2AI screw fixation. The pre-op supine PI can predict post-op standing PI precisely, which facilitates to provide correction surgery strategy with a good reference for ideal sagittal alignment postoperatively.

S2 alar-iliac screws are superior to traditional iliac screws for spinopelvic fixation in adult spinal deformity: a systematic review and meta-analysis.

PURPOSE: Spinopelvic fixation (SPF) using traditional iliac screws has provided biomechanical advantages compared to previous constructs, but common complications include screw prominence and wound complications. The newer S2 alar-iliac (S2AI) screw may provide a lower profile option with lower rates of complications and revisions for adult spinal deformity (ASD). The purpose of this study was to compare rates of complications and revision following SPF between S2AI and traditional iliac screws in patients with ASD. METHODS: A PRISMA-compliant systematic literature review was conducted using Cochrane, Embase, and PubMed. Included studies reported primary data on adult patients undergoing S2AI screw fixation or traditional IS fixation for ASD. Primary outcomes of interest were rates of revision and complications, which included screw failure (fracture and loosening), symptomatic screw prominence, wound complications (dehiscence and infection), and L5-S1 pseudarthrosis. RESULTS: Fifteen retrospective studies with a total of 1502 patients (iliac screws: 889 [59.2%]; S2AI screws: 613 [40.8%]) were included. Pooled analysis indicated that iliac screws had significantly higher odds of revision (17.1% vs 9.1%, OR = 2.45 [1.25-4.77]), symptomatic screw prominence (9.9% vs 2.2%, OR = 6.26 [2.75-14.27]), and wound complications (20.1% vs 4.4%, OR = 5.94 [1.55-22.79]). S2AI screws also led to a larger preoperative to postoperative decrease in pain (SMD = - 0.26, 95% CI = -0.50, - 0.011). CONCLUSION: The findings from this review demonstrate higher rates of revision, symptomatic screw prominence, and wound complications with traditional iliac screws. Current data supports the use of S2AI screws specifically for ASD. PROSPERO ID: CRD42022336515. LEVEL OF EVIDENCE: III.