Augmenting the basis of lodging tolerance in wheat (Triticum aestivum) under natural and simulated conditions.

In wheat (Triticum aestivum ), canopy architecture, culm diameter and stem strength are the key providers of lodging tolerance. To better understand the lodging phenomenon and determine the best linked trait to lodging, a study of lodging resistance was conducted in both artificially-induced and natural lodging conditions. Various morphological, phenological and biochemical traits, such as acid detergent fibre, acid detergent lignin, cellulose and activity of lignin-synthesising enzymes (phenylalanine ammonia lyase and tyrosine ammonia lyase) were recorded. Anatomical features were also examined by light microscopy, using the Wiesner reaction. Genotype C306 demonstrated the highest susceptibility to lodging compared to other varieties due to its limited production of lignin-synthesising enzymes, as well as its taller plant height and narrower culms. The dwarf mutants (DM6 and DM7) have a stronger resistance against lodging because they have thick stems and a short plant canopy structure. The most suitable donors for lodging are semidwarf varieties (HD2967, DPW621-50, DBW88) because they have higher production of lignin and lignin-synthesising enzymes. Grey correlation analysis also confirmed the ability of these three genotypes to tolerate lodging. The genotypes studied were comprehensively ranked. The study also includes an effort towards the standardisation of lodging methodology under artificial conditions.

Feedstock variability impacts the bioconversion of sugar and lignin streams derived from corn stover by Clostridium tyrobutyricum and engineered Pseudomonas putida.

Feedstock variability represents a challenge in lignocellulosic biorefineries, as it can influence both lignocellulose deconstruction and microbial conversion processes for biofuels and biochemicals production. The impact of feedstock variability on microbial performance remains underexplored, and predictive tools for microbial behaviour are needed to mitigate risks in biorefinery scale-up. Here, twelve batches of corn stover were deconstructed via deacetylation, mechanical refining, and enzymatic hydrolysis to generate lignin-rich and sugar streams. These batches and their derived streams were characterised to identify their chemical components, and the streams were used as substrates for producing muconate and butyrate by engineered Pseudomonas putida and wildtype Clostridium tyrobutyricum, respectively. Bacterial performance (growth, product titers, yields, and productivities) differed among the batches, but no strong correlations were identified between feedstock composition and performance. To provide metabolic insights into the origin of these differences, we evaluated the effect of twenty-three isolated chemical components on these microbes, including three components in relevant bioprocess settings in bioreactors, and we found that growth-inhibitory concentrations were outside the ranges observed in the streams. Overall, this study generates a foundational dataset on P. putida and C. tyrobutyricum performance to enable future predictive models and underscores their resilience in effectively converting fluctuating lignocellulose-derived streams into bioproducts.

Identification and Analysis of the Mechanism of Stem Mechanical Strength Enhancement for Maize Inbred Lines QY1.

Enhancing stalk strength is a crucial strategy to reduce lodging. We identified a maize inbred line, QY1, with superior stalk mechanical strength. Comprehensive analyses of the microstructure, cell wall composition, and transcriptome of QY1 were performed to elucidate the underlying factors contributing to its increased strength. Notably, both the vascular bundle area and the thickness of the sclerenchyma cell walls in QY1 were significantly increased. Furthermore, analyses of cell wall components revealed a significant increase in cellulose content and a notable reduction in lignin content. RNA sequencing (RNA-seq) revealed changes in the expression of numerous genes involved in cell wall synthesis and modification, especially those encoding pectin methylesterase (PME). Variations in PME activity and the degree of methylesterification were noted. Additionally, glycolytic efficiency in QY1 was significantly enhanced. These findings indicate that QY1 could be a valuable resource for the development of maize varieties with enhanced stalk mechanical strength and for biofuel production.

Use of Residual Lignocellulosic Biomass and Algal Biomass to Produce Biofuels.

Efforts are intensifying to identify new biofuel sources in response to the pressing need to mitigate environmental pollutants, such as greenhouse gases, which are key contributors to global warming and various worldwide calamities. Algae and microalgae present themselves as excellent alternatives for solid-gaseous fuel production, given their renewable nature and non-polluting characteristics. However, making biomass production from these organisms economically feasible remains a challenge. This article collates various studies on the use of lignocellulosic waste, transforming it from environmental waste to valuable organic supplements for algae and microalgae cultivation. The focus is on enhancing biomass production and the metabolites derived from these biomasses.

Biogas potential of organosolv pretreated wheat straw as mono and co-substrate: substrate synergy and microbial dynamics.

Anaerobic digestion (AD) technology can potentially address the gap between energy demand and supply playing a crucial role in the production of sustainable energy from utilization of biogenic waste materials as feedstock. The biogas production from anaerobic digestion is primarily influenced by the chemical compositions and biodegradability of the feedstock. Organosolv-steam explosion offers a constructive approach as a promising pretreatment method for the fractionation of lignocellulosic biomasses delivering high cellulose content.This study showed how synergetic co-digestion serves to overcome the challenges of mono-digestion's low efficiency. Particularly, the study evaluated the digestibility of organosolv-steam pretreated wheat straw (WSOSOL) in mono as well as co-digesting substrate with cheese whey (CW) and brewery spent grains (BSG). The highest methane yield was attained with co-digestion of WSOSOL + CW (338 mL/gVS) representing an enhanced biogas output of 1-1.15 times greater than its mono digestion. An ammonium production was favored under co-digestion strategy accounting for 921 mg/L from WSOSOL + BSG. Metagenomic study was conducted to determine the predominant bacteria and archaea, as well as its variations in their populations and their functional contributions during the AD process. The Firmicutes have been identified as playing a significant role in the hydrolysis process and the initial stages of AD. An enrichment of the most prevalent archaea genera enriched were Methanobacterium, Methanothrix, and Methanosarsina. Reactors digesting simpler substrate CW followed the acetoclastic, while digesting more complex substrates like BSG and WSOSOL followed the hydrogenotrophic pathway for biomethane production. To regulate the process for an enhanced AD process to maximize CH4, a comprehensive understanding of microbial communities is beneficial.

[Construction of microbial cell factories for synthesizing value-added chemicals with xylose].

Lignocellulose is the most abundant renewable resource on earth. Constructing microbial cell factories for synthesizing value-added chemicals with lignocellulose is the key to realize green biomanufacturing. Xylose is the second most fermentable sugar in lignocellulose after glucose. Building microbial cell factories that can efficiently metabolize xylose is of great significance to achieve full utilization of lignocellulose. However, the lower metabolism efficiency of xylose than that of glucose in most microorganisms limits the application of xylose. In recent years, the deepening understanding of microbial metabolic mechanisms and the continuous advancement of synthetic biology have greatly improved the efficiency of microbial metabolism of xylose and expanded the spectrum of xylose-derived products. This article introduces several xylose metabolic pathways that exist in the nature and the derived products, summarizes the strategies for constructing recombinant strains that can co-utilize xylose and glucose, and reviews the research progress in the application of lignocellulose hydrolysates in the synthesis of target products. Finally, this article discusses the current technical bottlenecks and prospects the future development directions in this field.

[Metabolic engineering for the efficient co-utilization of glucose and xylose].

Microbial production of chemicals from renewable biomass has emerged as a crucial route for sustainable bio-manufacturing. Lignocellulose with a renewable property and wide sources is supposed to be a promising feedstock for the second-generation biorefinery. The efficient co-utilization of mixed sugars from lignocellulosic hydrolysates represents one of the key challenges in reducing the production cost. However, most microorganisms prefer glucose over xylose due to carbon catabolite repression, which constrains the efficiency of lignocellulosic conversion. Therefore, developing the microbial platforms capable of simultaneously utilizing glucose and xylose is paramount for economically viable industrial-scale production. This article reviews the key strategies and studies of metabolic engineering for promoting efficient co-utilization of glucose and xylose by microorganisms. The representative strategies include relieving glucose repression, enhancing xylose transport, constructing xylose metabolic pathways, and directed evolution.

Functional analysis of two caffeoyl-coenzyme 3 a-o-methyltransferase involved in pear lignin metabolism.

Caffeoyl-coenzyme 3 A-O-methyltransferase (CCoAOMT) plays a crucial role in the lignin synthesis in many higher plants. In this study, nine PbCCoAOMT genes in total were identified from pear, and classified into six categories. We treated pear fruits with hormones abscisic acid (ABA) and methyl jasmonate (MeJA) and salicylic acid (SA) and observed differential expression levels of these genes. Through qRT-PCR, we also preliminarily identified candidate PbCCoAOMT gene, potentially involved in lignin synthesis in pear fruits. Additionally, the overexpression of PbCCoAOMT1/2 in Arabidopsis and pear fruits increased in lignin content. Enzymatic assays showed that recombinant PbCCoAOMT1/2 proteins have similar enzymatic activity in vitro. The Y1H (Yeast one-hybrid) and dual luciferase (dual-LUC) experiments demonstrated that PbMYB25 can bind to the AC elements in the promoter region of the PbCCoAOMT1 gene. Our findings suggested that the PbCCoAOMT1 and PbCCoAOMT2 genes may contribute to the synthesis of lignin and provide insights into the mechanism of lignin biosynthesis and stone cell development in pear fruits.

Acetyl Bromide Method for Total Lignin Content Determination in Plant Biomass.

Lignin is a tough biopolymer that gives plants strength and protection. It is also a major obstacle for converting plant biomass into biofuels because it prevents enzymes from accessing the sugar-rich fibers. To optimize biofuel production, we need to measure the lignin content in plant tissues accurately and efficiently. In this protocol, we describe a simple and reliable method to measure the total lignin content in plant tissues. The method uses acetyl bromide, a chemical that dissolves lignin into soluble derivatives and makes it possible to detect them by their absorbance at 280 nm. The method consists of two steps: first, we obtained destarched cell wall material from the plant samples, and second, we treat the cell wall material with acetyl bromide and measure the absorbance of the lignin solution. This method can capture all types of lignin and works well with different plant tissues.

Combined use of arbuscular mycorrhizal fungi and alkaline lignin enhance phosphorus nutrition and alleviate cadmium stress in lettuce (Lactuca sativa L.).

The excessive application of phosphorus (P) fertiliser and its poor utilisation efficiency have led to significant amounts of P being retained in agricultural soils in unavailable forms. The application of alkaline lignin to soil and its inoculation with arbuscular mycorrhizal fungi (AMF) have both been shown to improve plant P nutrition. However, their combined effects on soil P transformation remain unclear, particularly in cadmium (Cd)-contaminated soils. A potting experiment was conducted to examine the combined effects of AMF and alkaline lignin on soil P and Cd bioavailability and on the uptake of P and Cd by lettuce (Lactuca sativa L.) that were grown for 56 d in a growth chamber. Combined AMF and alkaline lignin treatment increased soil P availability and alkaline phosphatase activity. It furthermore increased bioavailable Cd concentrations of rhizosphere and bulk soils by 48 % and 72 %, respectively, and the Cd concentration in roots by 85 %, but the Cd concentration was not affected in the edible parts (shoots) of the lettuce. Moreover, the combined treatment increased shoot biomass by 26-70 % and root biomass by 99-164 %. Our findings suggested that the combined use of AMF and alkaline lignin mobilised both P and Cd in soil but did not increase the accumulation of Cd in the shoots of plants growing in Cd-contaminated soils, these results would provide guideline for increasing Cd tolerance of plants and their yield.

In situ imaging of LPMO action on plant tissues.

Lytic polysaccharide monooxygenases (LPMOs) are copper-dependent enzymes that oxidatively cleave recalcitrant polysaccharides such as cellulose. Several studies have reported LPMO action in synergy with other carbohydrate-active enzymes (CAZymes) for the degradation of lignocellulosic biomass but direct LPMO action at the plant tissue level remains challenging to investigate. Here, we have developed a MALDI-MS imaging workflow to detect oxidised oligosaccharides released by a cellulose-active LPMO at cellular level on maize tissues. Using this workflow, we imaged LPMO action and gained insight into the spatial variation and relative abundance of oxidised and non-oxidised oligosaccharides. We reveal a targeted action of the LPMO related to the composition and organisation of plant cell walls.

Significance of lignin and fungal markers in the Devonian (407 Ma) Rhynie Chert.

The Rhynie Chert (Lower Devonian, Scotland) hosts a remarkably well-preserved early terrestrial ecosystem. Organisms including plants, fungi, arthropods, and bacteria were rapidly silicified due to inundation by silica-rich hot spring fluids. Exceptional molecular preservation has been noted by many authors, including some of the oldest evidence of lignin in the fossil record. The evolution of lignin was a critical factor in the diversification of land plants, providing structural support and defense against herbivores and microbes. However, the timing of the evolution of lignin decay processes remains unclear. Studies placing this event near the end of the Carboniferous are contradicted by evidence for fungal pathogenesis in Devonian plant fossils, including from the Rhynie Chert. We conducted organic geochemical analyses on a Rhynie Chert sample, including hydropyrolysis (HyPy) of kerogen and high-resolution mass spectrometric mapping of a thin section, to elucidate the relationship between lignin and the potential fungal marker perylene. HyPy of kerogen showed an increase in relative abundance of perylene supporting its entrapment within the silicate matrix of the chert. Lignin monomers were isolated through an alkaline oxidation process, showing a distribution dominated by H-type monomers. G- and S-type monomers were also detected, preserved by rapid silicification. Polycyclic aromatic hydrocarbons including perylene, a known marker for lignin-degrading fungi, were also concentrated in the kerogen and found to be localized within silicified plant fragments. Our results strongly link perylene in the Rhynie Chert to the activity of phytopathogenic fungi, demonstrating the importance of fungal degradation processes as far back as the Early Devonian.

Heterologous expression and characterization of a dye-decolorizing peroxidase from Ganoderma lucidum, and its application in decolorization and detoxifization of different types of dyes.

Dye-decolorizing peroxidases (DyPs) belong to a novel superfamily of heme peroxidases that can oxidize recalcitrant compounds. In the current study, the GlDyP2 gene from Ganoderma lucidum was heterologously expressed in Escherichia coli, and the enzymatic properties of the recombinant GlDyP2 protein were investigated. The GlDyP2 protein could oxidize not only the typical peroxidase substrate ABTS but also two lignin substrates, namely guaiacol and 2,6-dimethoxy phenol (DMP). For the ABTS substrate, the optimum pH and temperature of GlDyP2 were 4.0 and 35 °C, respectively. The pH stability and thermal stability of GlDyP2 were also measured; the results showed that GlDyP2 could function normally in the acidic environment, with a T50 value of 51 °C. Moreover, compared to untreated controls, the activity of GlDyP2 was inhibited by 1.60 mM of Mg2+, Ni2+, Mn2+, and ethanol; 0.16 mM of Cu2+, Zn2+, methanol, isopropyl alcohol, and Na2EDTA·2H2O; and 0.016 mM of Fe2+ and SDS. The kinetic constants of recombinant GlDyP2 for oxidizing ABTS, Reactive Blue 19, guaiacol, and DMP were determined; the results showed that the recombination GlDyP2 exhibited the strongest affinity and the most remarkable catalytic efficiency towards guaiacol in the selected substrates. GlDyP2 also exhibited decolorization and detoxification capabilities towards several dyes, including Reactive Blue 19, Reactive Brilliant Blue X-BR, Reactive Black 5, Methyl Orange, Trypan Blue, and Malachite Green. In conclusion, GlDyP2 has good application potential for treating dye wastewater.

Enhancing detoxification of inhibitors in lignocellulosic pretreatment wastewater by bacterial Action: A pathway to improved biomass utilization.

The process of preprocessing techniques such as acid and alkali pretreatment in lignocellulosic industry generates substantial solid residues and lignocellulosic pretreatment wastewater (LPW) containing glucose, xylose and toxic byproducts. In this study, furfural and vanillin were selected as model toxic byproducts. Kurthia huakuii as potential strain could tolerate to high concentrations of inhibitors. The results indicated that vanillin exhibited a higher inhibitory effect on K. huakuii (3.95 % inhibition rate at 1 g/L than furfural (0.45 %). However, 0.5 g/L vanillin promoted the bacterial growth (-2.35 % inhibition rate). Interestingly, the combination of furfural and vanillin exhibited antagonistic effects on bacterial growth (Q<0.85). Furfural and vanillin could be bio-transformed into less toxic molecules (furfuryl alcohol, furoic acid, vanillyl alcohol, and vanillic acid) by K. huakuii, and inhibitor degradation rate could be promoted by expression of antioxidant enzymes. This study provides important insights into how bacteria detoxify inhibitors in LPW, potentially enhancing resource utilization.

Artificial selection of mutations in two nearby genes gave rise to shattering resistance in soybean.

Resistance to pod shattering is a key domestication-related trait selected for seed production in many crops. Here, we show that the transition from shattering in wild soybeans to shattering resistance in cultivated soybeans resulted from selection of mutations within the coding sequences of two nearby genes - Sh1 and Pdh1. Sh1 encodes a C2H2-like zinc finger transcription factor that promotes shattering by repressing SHAT1-5 expression, thereby reducing the secondary wall thickness of fiber cap cells in the abscission layers of pod sutures, while Pdh1 encodes a dirigent protein that orchestrates asymmetric lignin distribution in inner sclerenchyma, creating torsion in pod walls that facilitates shattering. Integration analyses of quantitative trait locus mapping, genome-wide association studies, and allele distribution in representative soybean germplasm suggest that these two genes are primary modulators underlying this domestication trait. Our study thus provides comprehensive understanding regarding the genetic, molecular, and cellular bases of shattering resistance in soybeans.

Building microbial consortia to enhance straw degradation, phosphorus solubilization, and soil fertility for rice growth.

Straw pollution and the increasing scarcity of phosphorus resources in many regions of China have had severe impacts on the growing conditions for crop plants. Using microbial methods to enhance straw decomposition rate and phosphorus utilization offers effective solutions to address these problems. In this study, a microbial consortium 6 + 1 (consisting of a straw-degrading bacterium and a phosphate-solubilizing bacterium) was formulated based on their performance in straw degradation and phosphorus solubilization. The degradation rate of straw by 6 + 1 microbial consortium reached 48.3% within 7 days (The degradation ability was 7% higher than that of single bacteria), and the phosphorus dissolution rate of insoluble phosphorus reached 117.54 mg·L- 1 (The phosphorus solubilization ability was 29.81% higher than that of single bacteria). In addition, the activity of lignocellulosic degrading enzyme system was significantly increased, the activities of endoglucanase, ß-glucosidase and xylanase in the microbial consortium were significantly higher than those in the single strain (23.16%, 28.02% and 28.86%, respectively). Then the microbial consortium was processed into microbial agents and tested in rice pots. The results showed that the microbial agent significantly increased the content of organic matter, available phosphorus and available nitrogen in the soil. Ongoing research focuses on the determination of the effects and mechanisms of a functional hybrid system of straw degradation and phosphorus removal. The characteristics of the two strains are as follows: Straw-degrading bacteria can efficiently degrade straw to produce glucose-based carbon sources when only straw is used as a carbon source. Phosphate-solubilizing bacteria can efficiently use glucose as a carbon source, produce organic acids to dissolve insoluble phosphorus and consume glucose at an extremely fast rate. The analysis suggests that the microbial consortium 6 + 1 outperformed individual strains in terms of both performance and application effects. The two strains within the microbial consortium promote each other during their growth processes, resulting in a significantly higher rate of carbon source consumption compared to the individual strains in isolation. This increased demand for carbon sources within the growth system facilitates the degradation of straw by the strains. At the same time, the substantial carbon consumption during the metabolic process generated a large number of organic acids, leading to the solubilization of insoluble phosphorus. It also provides a basis for the construction of this type of microbial consortium.

Recent Advances in Food Waste Transformations into Essential Bioplastic Materials.

Lignocellulose is a major biopolymer in plant biomass with a complex structure and composition. It consists of a significant amount of high molecular aromatic compounds, particularly vanillin, syringeal, ferulic acid, and muconic acid, that could be converted into intracellular metabolites such as polyhydroxyalkanoates (PHA) and hydroxybutyrate (PHB), a key component of bioplastic production. Several pre-treatment methods were utilized to release monosaccharides, which are the precursors of the relevant pathway. The consolidated bioprocessing of lignocellulose-capable microbes for biomass depolymerization was discussed in this study. Carbon can be stored in a variety of forms, including PHAs, PHBs, wax esters, and triacylglycerides. From a biotechnology standpoint, these compounds are quite adaptable due to their precursors' utilization of hydrogen energy. This study lays the groundwork for the idea of lignocellulose valorization into value-added products through several significant dominant pathways.

Function Analysis of a Maize Endo-1,4-ß-xylanase Gene ZmHSL in Response to High-Temperature Stress.

Rising temperature is a major threat to the normal growth and development of maize, resulting in low yield production and quality. The mechanism of maize in response to heat stress remains uncertain. In this study, a maize mutant Zmhsl-1 (heat sensitive leaves) with wilting and curling leaves under high temperatures was identified from maize Zheng 58 (Z58) mutant lines generated by ethyl methanesulfonate (EMS) mutagenesis. The Zmhsl-1 plants were more sensitive to increased temperature than Z58 in the field during growth season. The Zmhsl-1 plants had lower plant height, lower yield, and lower content of photosynthetic pigments. A bulked segregant analysis coupled with whole-genome sequencing (BSA-seq) enabled the identification of the corresponding gene, named ZmHSL, which encodes an endo-ß-1,4-xylanase from the GH10 family. The loss-of-function of ZmHSL resulted in reduced lignin content in Zmhsl-1 plants, leading to defects in water transport and more severe leaf wilting with the increase in temperature. RNA-seq analysis revealed that the differentially expressed genes identified between Z58 and Zmhsl-1 plants are mainly related to heat stress-responsive genes and unfolded protein response genes. All these data indicated that ZmHSL plays a key role in lignin synthesis, and its defective mutation causes changes in the cell wall structure and gene expression patterns, which impedes water transport and confers higher sensitivity to high-temperature stress.

Sustainable synthesis pathways: Bacterial nanocellulose from lignocellulosic biomass for circular economy initiatives.

The hydrothermal pretreatment process stands out as a pivotal step in breaking down the hemicellulosic fraction of lignocellulosic biomasses, such as sugarcane bagasse and eucalyptus sawdust. This pretreatment step is crucial for preparing these materials for subsequent processes, particularly in food applications. This technique aims to disintegrate plant wall components like cellulose, hemicellulose, and lignin, and facilitating access in later phases such as enzymatic hydrolysis, and ultimately making fermentable sugars available. In this study, sugarcane bagasse and eucalyptus sawdust biomass underwent hydrothermal pretreatment at specific conditions, yielding two key components: dry biomass and hemicellulose liquor. The primary focus was to assess the impact of hydrothermal pretreatment followed by enzymatic hydrolysis, using the Celic Ctec III enzyme cocktail, to obtain fermentable sugars. These sugars were then transformed into membranes via strain Gluconacetobacter xylinus bacterial biosynthesis. Notably, the addition of a nitrogen source significantly boosted production to 14.76 g/ in hydrolyzed sugarcane bagasse, underscoring its vital role in bacterial metabolism. Conversely, in hydrolyzed eucalyptus, nitrogen source inclusion unexpectedly decreased yield, highlighting the intricate interactions in fermentation media and the pivotal influence of nitrogen supplementation. Characterization of membranes obtained in synthetic and hydrolyzed media through techniques such as FEG-SEM, FTIR, and TGA, followed by mass balance assessment, gauged their viability on an industrial scale. This comprehensive study aimed not only to understand the effects of pretreatment and enzymatic hydrolysis but to also evaluate the applicability and sustainability of the process on a large scale, providing crucial insights into its feasibility and efficiency in practical food-related scenarios, utilizing nanocellulose bacterial (BNC) as a key component.

Identification of key genes involved in lignin and flavonoid accumulation during Tilia tuan seed maturation.

KEY MESSAGE: Transcriptomics and phenotypic data analysis identified 24 transcription factors (TFs) that play key roles in regulating the competitive accumulation of lignin and flavonoids. Tilia tuan Szyszyl. (T. tuan) is a timber tree species with important ecological and commercial value. However, its highly lignified pericarp results in a low seed germination rate and a long dormancy period. In addition, it is unknown whether there is an interaction between the biosynthesis of flavonoids and lignin as products of the phenylpropanoid pathway during seed development. To explore the molecular regulatory mechanism of lignin and flavonoid biosynthesis, T. tuan seeds were harvested at five stages (30, 60, 90, 120, and 150 days after pollination) for lignin and flavonoid analyses. The results showed that lignin accumulated rapidly in the early and middle stages (S1, S3, and S4), and rapid accumulation of flavonoids during the early and late stages (S1 and S5). High-throughput RNA sequencing analysis of developing seeds identified 50,553 transcripts, including 223 phenylpropanoid biosynthetic pathway genes involved in lignin accumulation grouped into 3 clusters, and 106 flavonoid biosynthetic pathway genes (FBPGs) grouped into 2 clusters. Subsequent WGCNA and time-ordered gene co-expression network (TO-GCN) analysis revealed that 24 TFs (e.g., TtARF2 and TtWRKY15) were involved in flavonoids and lignin biosynthesis regulation. The transcriptome data were validated by qRT-PCR to analyze the expression profiles of key enzyme-coding genes. This study revealed that there existed a competitive relationship between flavonoid and lignin biosynthesis pathway during the development of T. tuan seeds, that provide a foundation for the further exploration of molecular mechanisms underlying lignin and flavonoid accumulation in T. tuan seeds.