ABSTRACT
Introduction: Temporary Anchorage Devices have revolutionized our approach to anchorage management. However, their placement may carry risks, such as root perforation, damage to the periodontal ligament, buccal-nasal communication, etc. The aim of this article is to describe an original protocol in two times for the placement of a palatal mini-screw through guided surgery using a guide created by Computer-Aided Design and Manufacturing (CAD/CAM) followed by the transfer of placement information to the laboratory for the fabrication of a Custom Medical Device (CMD) for distalization. Materials and Methods: A two-stage protocol is described and illustrated step by step. Phase 1 comprises 7 steps (including superimposition of maxillary cast and profile teleradiography, surgical tray design), followed by phase 2, which involves 3 final steps (including production of impression for laboratory, production of laboratory model with transfer of mini-screw position). Results: Although the position of the mini screws remains precise, a discrepancy between the planning and the intraoral situation exists. The addition of a second step therefore enables the distalization appliance to be fitted precisely and without pitfalls. Finally, this protocol ensures safe placement, making work easier for the practitioner and, ultimately, for the patient. Conclusion: In a two-stage process, the placement of palatal mini screws through guided surgery using a guide created by CAD/CAM followed by the transfer of this information to the laboratory for the fabrication of a CMD for distalization proves to be a relevant approach.
Introduction: Les dispositifs d'ancrage temporaires ont révolutionné notre vision de la gestion de l'ancrage. En revanche, leur mise en place peut comporter certains risques (perforation radiculaire, communication bucco-nasale, lésions vasculaires ). Cet article vise à décrire un protocole original, en deux temps, de pose de mini-vis palatine par chirurgie guidée à l'aide d'un guide réalisé par conception et fabrication assistée par ordinateur (CFAO) in-office suivie du transfert des informations de pose au laboratoire pour la confection d'un appareil de distalisation. Matériel et méthodes: Un protocole en deux temps est décrit pas à pas. Le temps 1 comprend sept étapes (dont le placement virtuel des mini-vis et la création de la gouttière chirurgicale), suivi du temps 2 qui implique trois étapes (dont la réalisation de l'empreinte pour le laboratoire et l'élaboration du modèle de laboratoire avec transfert de la position des mini-vis). Résultats: Bien que la pose puisse être considérée comme précise, une différence existe entre la planification et la situation clinique. L'apport d'un second temps améliore l'adaptation de l'appareil de distalisation. Enfin, ce protocole offre une pose sécurisée et apporte ainsi un confort de travail pour le praticien et, in fine, pour le patient. Conclusion: Réalisée en deux temps, la pose de mini-vis palatine par chirurgie guidée à l'aide d'un guide réalisé par CFAO in-office suivie du transfert de cette information au laboratoire pour la confection d'un appareil de distalisation s'avère être une approche pertinente.
Subject(s)
Bone Screws , Computer-Aided Design , Maxilla , Molar , Orthodontic Anchorage Procedures , Humans , Orthodontic Anchorage Procedures/instrumentation , Orthodontic Anchorage Procedures/methods , Maxilla/surgery , Molar/surgery , Tooth Movement Techniques/methods , Tooth Movement Techniques/instrumentation , Palate/surgery , Orthodontic Appliance Design , Surgery, Computer-Assisted/methodsABSTRACT
BACKGROUND: Multi-rooted teeth with extensive dental defects often face challenges in stability and biomechanical failure. High-performance polymer PEEK materials, with properties closer to dentin, show promise in reducing stress concentration and preserving tooth structure. This report aimed to explore the use of a highly retentive polyetheretherketone (PEEK) for manufacturing custom-made split post and core for the restoration of grossly destroyed endodontically treated molars. CLINICAL CONSIDERATIONS: A 40-year-old female patient presented with complaints of loss of tooth substance in the posterior mandibular tooth. This case involved the digital design and fabrication of PEEK split post and core to restore multirooted molar with insufficient dental tissue remnants. The restorations were evaluated over a 3-year follow-up using the World Federation criteria (FDI). The restoration was clinically evaluated through intraoral examination, radiographic assessment, and subjective patient satisfaction, and was deemed clinically good according to FDI criteria. CONCLUSION: The outstanding mechanical properties of PEEK, coupled with the structure of the split post, provide an effective treatment option for weakened multirooted teeth. Simultaneously, the restoration configuration effectively addressed the challenge of varying postinsertion directions, and the interlocking mechanism between the primary and auxiliary posts enhanced the stability of the post and core.
Subject(s)
Benzophenones , Ketones , Molar , Polyethylene Glycols , Polymers , Humans , Female , Adult , Molar/surgery , Post and Core Technique , Follow-Up Studies , Dental Prosthesis Design , Tooth, Nonvital/surgery , Computer-Aided DesignABSTRACT
BACKGROUND: Warfarin patients who need dental extraction face the problem of bleeding and no sufficient hemostasis results in dry socket and postoperative pain. This study aimed to evaluate and compare the efficacy of the topical application of tranexamic acid-soaked absorbable Gelfoam (TXA-Gel) and saline-soaked absorbable Gelfoam (saline-Gel) in relieving postoperative pain following bilateral simple extraction of permanent mandibular molars in warfarin patients. METHODS: This was a randomized, triple-blinded, split-mouth, active-controlled clinical trial. It was performed at the Department of Oral and Maxillofacial Surgery, Faculty of Dentistry, Damascus University, between November 2021 and October 2023. 60 bilateral permanent mandibular molars, which were indicated for simple extraction in 30 warfarin patients randomly assigned into two groups according to the topical hemostatic agents after extraction used: Group 1: control group, saline-Gel (n = 30). Group 2: TXA-Gel (n = 30). A simple randomization method was performed by flipping a coin. The primary outcome measure was the visual analogue scale (VAS). The intensity of pain was evaluated at the baseline (t0), and on the 1st (t1), 2nd (t2), 3rd (t3), 4th (t4), 5th (t5), 6th (t6), and 7th (t7) days following extraction. The Kolmogorov-Smirnov test and the Mann-Whitney U test were performed. The level of significance was set at 0.05 (p < 0.05). RESULTS: The mean vas scores was 4.17 ± 1.76 at t1 and decreased to 0.73 ± 0.78 at t7 in the TXA-Gel group. However, in the Gelfoam group, the mean vas scores was 4.83 ± 2.18 at t1 and decreased to 1.80 ± 1.00 at t7. The results of the Mann-Whitney U test showed that there was no statistically significant difference between the two groups at t1 (p = 0.236) and t2 (p = 0.155). However, there was a statistically significance difference at the rest time points (p < 0.05). CONCLUSIONS: TXA-Gel played a prominent role in alleviating post-extraction pain in warfarin patients. TRIAL REGISTRATION: The trail was retrospectively registered at the ISRCTN registry (ISRCTN71901901).
Subject(s)
Administration, Topical , Gelatin Sponge, Absorbable , Pain, Postoperative , Tooth Extraction , Tranexamic Acid , Warfarin , Humans , Tranexamic Acid/administration & dosage , Tranexamic Acid/therapeutic use , Warfarin/therapeutic use , Warfarin/administration & dosage , Male , Pain, Postoperative/prevention & control , Pain, Postoperative/drug therapy , Female , Gelatin Sponge, Absorbable/therapeutic use , Adult , Pain Measurement , Middle Aged , Hemostatics/therapeutic use , Hemostatics/administration & dosage , Anticoagulants/therapeutic use , Anticoagulants/administration & dosage , Antifibrinolytic Agents/administration & dosage , Antifibrinolytic Agents/therapeutic use , Molar/surgeryABSTRACT
AIM: To assess the implant stability and amount of marginal bone loss in immediate implant placement (IIP) in mandibular molars by using pre-extractive interradicular implant bed preparation vs conventional post-extractive interradicular implant bed preparation. MATERIALS AND METHODS: This randomized clinical trial was conducted on fourteen patients who had an immediate dental implant at the mandibular molar area by two different techniques. All patients were divided randomly into two equal groups: Group I (control) was treated with conventional post-extractive interradicular implant bed preparation, and group II (test) was treated by pre-extractive interradicular implant bed preparation All surgeries were performed by the same surgeon. All patients were followed up clinically at immediate post-surgery (T0), 7 days (T1), 3 weeks (T2), 90 days (T3), and 3 months after loading (T6) for healing and to evaluate the marginal bone loss radiographically at T0, T3 and T6. Descriptive and bivariate statistics were computed using the SPSS version (SPSS, IBM Inc., Chicago, IL), and p ≤ 0.05 was considered an indicator of statistical significance. RESULTS: A total of 7 female and 7 male patients with a mean age of 32.07 ± 5.87 years. Radiographically, there is no significant statistical difference in comparing between two groups for the marginal bone loss. However, there was a highly significant statistical difference (p < 0.001) in each group between different interval periods (T0, T3, T6) with mean start 5.27 ± 0.53, and 5.19 ± 0.72 at (T0) reaching 7.60 ± 0.89 and 7.09 ± 0.96 at (T3) and slightly decrease of 7.52 ± 0.79 and 7.02 ± 0.79 in (T6) with radiographic evaluation, and it represented clinically in each group with mean 3.57 ± 0.313 and 4.0 ± 0.58 at (T0) increase to 6.55 ± 0.395 and 6.52 ± 0.45 at (T6) for both group respectively. There is no statistically significant difference in soft tissue healing with an average mean of 4.57 ± 0.24 and 3.57 ± 0.509 (p = 0.001) when comparing between both groups respectively. CONCLUSION: Both techniques seem useful for dental implant placement in badly decayed mandibular molars. However, pre-extracted interradicular implant bed preparation for IIP might offer advantages in terms of primary implant stability and bone preservation. However, further studies are needed to confirm these findings. CLINICAL SIGNIFICANCE: Both techniques are alternative methods for the treatment of badly decayed mandibular molars by immediate dental implant except for minor complications that do not interfere with dental implant placement. How to cite this article: Alzaibak LMA, Abdel-Monem TM, Elgohary NM, et al. Immediate Implant Placement with Different Interradicular Osteotomies in the Mandible: A Randomized Clinical Study. J Contemp Dent Pract 2024;25(4):303-312.
Subject(s)
Alveolar Bone Loss , Immediate Dental Implant Loading , Mandible , Molar , Humans , Male , Female , Adult , Mandible/surgery , Alveolar Bone Loss/diagnostic imaging , Molar/surgery , Immediate Dental Implant Loading/methods , Osteotomy/methods , Dental Implantation, Endosseous/methodsABSTRACT
Background: Different methods for removing dental carious lesions exist, including conventional rotary caries removal and new advanced technology like polymer-based burs, chemomechanical agents, air abrasion, and laser. Objectives: This study shows the differences in features of dentin (smear layer, patency of dentinal tubules, surface irregularities, intertubular micro porosities, and exposed dentinal tubules) among different types of caries removal techniques. Materials and Methods: An in vitro study was done on 60 primary molars with occlusal class I active caries. Teeth were divided into three groups according to a method of caries removal (G1: chemomechanical, G2: mechanical with a smart bur, and G3: air-abrasion). After complete caries excavation, the teeth were examined under a scanning electronic microscope (SEM) with the power of magnification 4,000x and 8,000x to show the morphological dentinal features with SEM microphotographs. Data obtained was analyzed using the SPSS program where Fisher exact, Kruskal-Wallis and multiple Wilcoxon sum rank tests were used. The level of significance is when the p-value is less than 0.05. Results: Generally, SEM showed the highest ratio of score 1 of smear layer presence, surface irregularities, and microporosity in all groups in both magnifications. The patency of tubules showed the highest ratio of score 1 in G1, scores 2 in both G2 and G3 in magnification 4,000x, while 8,000x there was the highest ratio of its score 1 in G1 and G2 while the G3 has score 2 as the highest score. The exposed dentinal tubules showed the highest ratio in G1 in score 3, in G2 in score 2, and in G3 in score 1 in magnification 4,000x, while 8,000x there was the highest ratio of its score 2 in both G1 and G3 while the G3 has highest score 1. The study with magnification 4,000x showed a significant difference (S) among three groups in exposed dentinal tubules with a p-value (0.012), and there was S between chemomechanical and smart, chemomechanical and air-abrasions groups with a p-value (0.041, 0.001 subsequentially). Other dentin features showed non-significant differences (NS) among or between groups in both magnifications (4,000x, 8,000x). Conclusions: All groups were effective in removing caries and can successfully treat young, scared or stressed patients. All methods of caries removal produce clinically parametric changes in the residual dentin.
Subject(s)
Dental Caries , Dentin , Microscopy, Electron, Scanning , Molar , Dental Caries/therapy , Dental Caries/pathology , Humans , Molar/surgery , In Vitro Techniques , Air Abrasion, Dental/methods , Dental Cavity Preparation/methods , Dental Cavity Preparation/instrumentation , Surface PropertiesABSTRACT
BACKGROUND: The distal aspect of the second molar (d-M2) often exhibits infrabony defects due to the adjacent third molar. Although the defects can be treated by guided tissue regeneration (GTR) after removing the third molar, the optimal timing remains uncertain following third molar removal in clinical decision-making. This study aimed to compare delayed and immediate GTR treatments to assist in clinical decision-making. METHODS: D-M2 infrabony defects with a minimum 1-year follow-up were collected and divided into three groups: Immediate GTR group, which underwent third molar extraction and received GTR simultaneously; Delayed GTR group, which underwent delayed GTR at least 3 months after third molar extraction; and Control group, which underwent only scaling and root planing during third molar extraction. The clinical and radiographic parameters related to the infrabony defect before GTR and post-surgery were evaluated using the Kruskal-Wallis test or one-way ANOVA, followed by post-hoc Dunn's test or the Bonferroni test for pairwise comparisons. RESULTS: A total of 109 d-M2 infrabony defects were assessed. No significant differences were found between the two GTR groups, although both of them showed significant reductions in infrabony defect depth: the immediate GTR group (2.77 ± 1.97 mm vs. 0.68 ± 1.03 mm, p < 0.001) and the delayed GTR group (2.98 ± 1.08 mm vs. 0.68 ± 1.03 mm, p < 0.001) compared to the control group. CONCLUSION: GTR can effectively improve d-M2 infrabony defects when the third molar is removed, whether simultaneously or delayed. Patients may experience less discomfort with immediate GTR treatment as it requires only one surgery.
Subject(s)
Guided Tissue Regeneration, Periodontal , Molar, Third , Molar , Tooth Extraction , Humans , Molar, Third/surgery , Retrospective Studies , Male , Female , Adult , Guided Tissue Regeneration, Periodontal/methods , Molar/surgery , Alveolar Bone Loss/surgery , Alveolar Bone Loss/diagnostic imaging , Time Factors , Middle Aged , Young AdultABSTRACT
Ectopic eruption of the second permanent molar is a tooth replacement disorder during adolescence. If not treated in time, it can cause hard tissue of the adjacent first molar resorption, early tooth loss, decreased chewing efficiency, and other serious malocclusions. Timely detection and treatment of ectopic eruption of the second permanent molar are of great significance in preventing malocclusions in adolescents and establishing normal occlusion relationships. However, current case reports on the ectopic eruption of the mandibular second molar are relatively rare and are mostly concentrated on surgical and orthodontic treatments, and long-term follow-up is lacking. This paper reports a case in which brass wire ligation was used to treat ectopic eruption of the mandibular second permanent molar, allowing the permanent teeth to erupt smoothly and establish a normal occlusion. The patient was observed for five years after the operation. The occlusion was stable, and the tooth root development, pulp vitality, and periodontal conditions were normal. This paper provides a clinical approach that is short in treatment duration, simple, and minimally invasive for young mandibular second permanent molars with moderate mesial inclination and partial eruption. This method is of importance in helping children establish physiological occlusion.
Subject(s)
Mandible , Molar , Tooth Eruption, Ectopic , Humans , Molar/surgery , Tooth Eruption, Ectopic/surgery , Mandible/surgery , Adolescent , LigationABSTRACT
Most of the maxillary impacted third molars are located in the maxillary tuberosity, where the vision and operation space are limited. This paper reports a case of surgical extraction of the left maxillary horizontal superhigh impacted third molar, which is located between the roots of the adjacent teeth and is closely related to the maxillary sinus. The digital simulation technology was used to reconstruct a three-dimensional visual image of the patient's maxilla, related teeth, and other adjacent anatomical structures to assist in finding the optimal surgical method accurately. Root dislocation before the crown not only protects the roots of the adjacent tooth, but also reduces the risk of maxillary sinus lining damage or perforation during operative procedures, improves the efficiency of the operation, and reduces surgical trauma, which conforms to the concept of minimally invasive surgery and provides a new idea and experience for the clinical extraction of such maxillary impacted third molars.
Subject(s)
Maxilla , Molar, Third , Tooth Extraction , Tooth Root , Tooth, Impacted , Humans , Molar, Third/surgery , Tooth, Impacted/surgery , Maxilla/surgery , Tooth Root/surgery , Imaging, Three-Dimensional , Molar/surgery , Maxillary Sinus/surgeryABSTRACT
Cases of relatively safe dental implant treatment in patients with low-volume bisphosphonate (BP) have been gradually reported. Although bone augmentation is commonly used when the bone volume is insufficient for implant placement, the studies and case reports regarding the safety of bone augmentation in patients treated with BP remain insufficient. Herein, we report a case wherein bone augmentation was performed after BP treatment with bone healing realized according to imaging, and we review the literature regarding BP and bone augmentation. A 67-year-old Japanese woman requested implant treatment for a hopeless lower right second molar. She had been taking minodronic acid hydrate (50 mg/4 wk) for 18 months to treat steroid-induced osteoporosis. After obtaining informed consent, tooth extraction and bone augmentation within the extraction socket were performed. The tooth was extracted atraumatically to preserve the surrounding alveolar bone, and the extraction socket was intensely curetted. Subsequently, the socket was filled with carbonate apatite granules and covered with a biodegradable membrane, and the wound was sutured without tension. Although protracted wound healing without any symptoms of infection was observed, the wound healed completely. No clinical symptoms were observed, the color of the mucosa at the site was healthy, and imaging findings at 6 months postoperation indicated that osteogenesis had progressed uneventfully.
Subject(s)
Alveolar Ridge Augmentation , Bone Density Conservation Agents , Diphosphonates , Humans , Female , Aged , Alveolar Ridge Augmentation/methods , Bone Density Conservation Agents/adverse effects , Bone Density Conservation Agents/therapeutic use , Diphosphonates/adverse effects , Diphosphonates/therapeutic use , Tooth Socket/surgery , Tooth Extraction , Imidazoles/therapeutic use , Imidazoles/adverse effects , Bone Substitutes/therapeutic use , Mandible/surgery , Osteoporosis/drug therapy , Dental Implantation, Endosseous , Molar/surgeryABSTRACT
This paper researches the history of treatment planning for extraction of the first permanent molars and the early influence of American orthodontists on dental practice in the UK. It also discusses the development of clinical guidelines for the enforced extraction of first permanent molars to the present day.
Subject(s)
Molar , Tooth Extraction , Humans , United Kingdom , Tooth Extraction/history , Molar/surgery , History, 20th Century , Patient Care Planning , History, 19th Century , History, 21st Century , United StatesABSTRACT
BACKGROUND: Tooth avulsion represents the most severe form of dental trauma, necessitating tooth replantation as the primary treatment. However, the risk of replacement root resorption (RRR) poses a significant threat to tooth retention following replantation. This study preliminarily aimed to investigate the effect of physiological occlusal force on RRR after the replantation of avulsed teeth and to explore the potential underlying mechanisms. METHODS: Thirty-six 4-week-old male Sprague-Dawley rats underwent extraction and immediate replantation of their left maxillary molars. The rats were randomly divided into two major groups: the occluded (n = 18) group, where the opposite mandibular teeth were preserved; non-occluded (n = 18) group, where the opposite mandibular teeth were extracted. Within each major group, there were three subgroups corresponding to 7 days, 14 days, and 2 months, resulting in a total of six subgroups, (n = 6 per subgroup). The right maxillary first molars served as the normal control. Various periodontal characteristics were assessed using haematoxylin-eosin (H&E), tartrate-resistant acid phosphatase (TRAP) staining, and micro-computed tomography (micro-CT). RESULTS: Histological staining revealed that under occlusal force, the early stage (day 7) after tooth replantation mainly manifested as root surface resorption, especially in the non-occluded group, which gradually diminished over time. Cementum and periodontal ligament (PDL) repair was observed on day 14. Micro-CT analysis indicated a significant decrease in PDL width in the non-occluded group two months after replantation, consistent with the histological findings, signifying severe RRR in the non-occluded group. CONCLUSIONS: This study provides preliminary evidence that physiological occlusal force may attenuate osteoclastogenesis during the early stage of tooth replantation, thereby reducing the occurrence of RRR and promoting periodontal healing.
Subject(s)
Bite Force , Rats, Sprague-Dawley , Root Resorption , Tooth Avulsion , Tooth Replantation , X-Ray Microtomography , Animals , Root Resorption/etiology , Tooth Replantation/methods , Male , Tooth Avulsion/surgery , Rats , Molar/surgerySubject(s)
Dental Enamel Hypoplasia , Molar , Tooth Extraction , Humans , Molar/surgery , Dental Enamel Hypoplasia/therapy , Child , Female , Incisor/abnormalities , Male , Molar HypomineralizationABSTRACT
STUDY DESIGN: A randomised parallel controlled clinical trial was conducted between 2013 and 2015 at the University of Sao Paulo, Brazil, to assess the impact of pulpectomy or extraction on the oral health-related quality of life (OHRQoL) of children with pulp necrosis in primary molars. STUDY SELECTION: Children between the ages of 3 and 5 who were in good health but had extensive caries in at least one primary molar with signs of pulpal necrosis (also as seen radiographically, caries reaching the pulp with no signs of internal or external resorption) were considered for inclusion. Additionally, teeth with sufficient structure for rubber dam placement were also included. Children with any systemic, neurological, or other conditions that negatively impacted their growth were excluded. CLINICAL PROCEDURES AND SUCCESS CRITERIA: After computer-generated randomisation, 100 children were assigned randomly into two groups: 50 in the pulpectomy group and 50 in the dental extraction group. A paediatric dentist performed all procedures under local anaesthesia without sedation or general anaesthesia, and a rubber dam was used for pulpectomy with composite restoration in a single session. The OHRQoL scores were evaluated at baseline, 4, 8, and 12 months using the Brazilian version of the Early Childhood Oral Health Impact Scale (B-ECOHIS) via face-to-face interviews with parents conducted by a researcher trained in a single-blinded fashion. Additionally, the child's self-reported dental anxiety was measured using the Facial Image Scale (FIS), and dental pain was assessed using the Wong-Baker Faces Pain Scale (WBFPS) immediately after the treatment as secondary outcomes. RESULTS: The mean difference (SD) in the total B-ECOHIS score between baseline and after 12 months was 12.66 (6.79) for the pulpectomy group and 10.94 (9.28) for the extraction group, with effect sizes of 3.2 (95% CI: 2.42-4.20) and 1.4 (95% CI: 0.84-2.11), respectively. While both treatments significantly improved the children's OHRQoL after 12 months, the pulpectomy group showed greater long-term improvement compared to the extraction group, with mean differences (SD) of 4.86 (6.13) and effect sizes of 0.8 (0.46-1.13; p < 0.001). Moreover, children in the extraction group showed higher levels of anxiety compared with those in the pulpectomy group at 12-month follow-up (OR = 2.52; 95% CI = 1.30-4.89), and they reported 93% more odds of 'dental pain with high level' immediately after treatment than those in the pulpectomy group (OR = 1.93; 95% CI = 0.83-4.49). CONCLUSION: Children treated with pulpectomy in their necrotic primary molars were found to have better OHRQoL than those who had their primary molars extracted.
Subject(s)
Molar , Oral Health , Pulpectomy , Quality of Life , Tooth Extraction , Tooth, Deciduous , Humans , Tooth, Deciduous/surgery , Pulpectomy/methods , Female , Child, Preschool , Male , Molar/surgery , Dental Pulp Necrosis/surgery , BrazilABSTRACT
BACKGROUND: Pulpectomy continues to be the standard treatment recommendation for management of vital primary molars diagnosed with symptomatic irreversible pulpitis. The recent decade has seen a paradigm shift in the treatment concepts of how vital mature permanent molars diagnosed with irreversible pulpitis can be more conservatively managed using vital pulp therapy techniques like pulpotomy. However, despite emerging evidence indicating similarities between primary and permanent tooth pulp response to dental caries, there is limited research on whether pulpotomy can be similarly used as a definitive treatment modality for vital primary teeth with irreversible pulpitis. This randomised controlled trial (RCT) aims to compare the treatment effectiveness of pulpotomy versus pulpectomy in management of vital primary molars diagnosed with symptomatic irreversible pulpitis over a two-year period. METHODS/DESIGN: This clinical study is a parallel, two-armed, open label, non-inferiority RCT with a 1:1 allocation ratio between the experimental intervention arm (pulpotomy) and the active comparator arm (pulpectomy). Healthy cooperative children, between 4-9 years of age, who have painful primary molars with clinical symptoms typical of irreversible pulpitis will be recruited after obtaining informed consent from their parents/legal guardians. 50 vital primary molars clinically diagnosed with symptomatic irreversible pulpitis will be randomly distributed between the two treatment arms. The primary outcomes that will be assessed are clinical and radiographic success after six-months, one-year and two-years of the trial interventions. The influence of baseline pre-operative variables (age; gender; tooth type; site of caries; pre-operative furcal radiolucency; pre-operative pain intensity) and intra-operative factors (time taken to achieve haemostasis) on treatment outcomes will also be assessed. The secondary outcome evaluated will be the immediate (24 h and 7 d) post-operative pain relief afforded by the two treatment interventions. DISCUSSION: This trial seeks to provide evidence on whether pulpotomy treatment can be no worse than the standard pulpectomy treatment for the management of symptomatic irreversible pulpitis in vital primary molars. TRIAL REGISTRATION: ClinicalTrials.gov (NCT06183203). Registered on 30 January 2024.
Subject(s)
Molar , Pulpectomy , Pulpitis , Pulpotomy , Tooth, Deciduous , Child , Child, Preschool , Female , Humans , Male , Equivalence Trials as Topic , Molar/surgery , Pulpectomy/methods , Pulpitis/surgery , Pulpitis/therapy , Pulpotomy/methods , Tooth, Deciduous/surgery , Treatment Outcome , Randomized Controlled Trials as TopicABSTRACT
Isolated coronoid process fractures are uncommon, and iatrogenic isolated fractures are extremely rare. This case describes a displaced fracture of an isolated coronoid process thought to be due to excessive force applied by a dentist that had been overlooked and left untreated for about a month. The patient was a woman in her late 50's and she had undergone a molar extraction. Her dentist had confused her symptoms of trismus, pain, and facial oedema with the complex tooth extraction procedure. Following a cone-beam computed tomography (CBCT) scan we showed that the mandibular coronoid process on her right side had suffered a longitudinal fracture, and the fractured fragment had rotated upwards and inwards. Following successful surgical elimination of the fragmented coronoid process, the patient received targeted physiotherapy sessions that yielded excellent results. At the five-month follow-up, the ability of the patient to open her mouth had improved enormously, and her facial appearance almost recovered to its original state.
Subject(s)
Cone-Beam Computed Tomography , Tooth Extraction , Humans , Female , Tooth Extraction/adverse effects , Middle Aged , Molar/surgery , Molar/injuries , Mandibular Fractures/surgery , Mandibular Fractures/diagnostic imaging , Mandible/surgery , Mandible/diagnostic imaging , Mandible/pathologyABSTRACT
The anatomy of furcation favours the bacterial retention and makes periodontal debridement as well as oral hygiene procedures difficult. Teeth that have lost attachment to a level of the furcation are said to have a furcal invasion or furcation involved.Involvement of furcation in a multi-rooted tooth poses a very different type of clinical situation in terms of establishment of diagnosis, determination of prognosis and of course planning the treatment modality.The present study was carried out on 200 selected extracted human first and second permanent molar teeth based on a predefined criteria. Teeth with prosthetic crowns, fused or fractured roots, those not fully developed, grossly carious or heavily restored at the cementoenamel junction (CEJ) were excluded from the study. The morphology of the root trunk was recorded by measuring various dimensions of the root trunk,including furcal angle and root trunk volume was calculated by using a custom made special apparatus. The furcation areas were debrided with different types of curettes in the market in order to see how best the instrument could be maneuvered in the furcation area. The data so obtained was statistically analysed using SPSS version 22. The highest root trunk volume and the longest root trunk length were found to be in the maxillary second molar. 48.60% furcations didn't allow instrument engagementof furcation area with standard area specific curettes. The proposal of inclusion of root trunk length (mm) is suggested in addition to classification of FI to have assess prognosis and appropriate treatment for of the involved tooth.
Subject(s)
Furcation Defects , Tooth Root , Humans , Tooth Root/anatomy & histology , Molar/surgery , Molar/anatomy & histology , Tooth Cervix , Prognosis , Biometry , Furcation Defects/surgery , Furcation Defects/diagnosisABSTRACT
BACKGROUND Vital pulp therapy approaches are preferred over non-surgical root canal treatment, giving the advantage of preserving the vitality of the dental pulp and thus maintaining its benefits. Such approaches can be performed in teeth having normal apical area; however, performing vital pulp therapy approaches in teeth associated with periapical pathology remains controversial. CASE REPORT We present a case of a mature mandibular right first permanent molar tooth in a medically fit 10-year-old female diagnosed as asymptomatic irreversible pulpitis with asymptomatic apical periodontitis with periapical radiolucency having a periapical index (PAI) score of 4. Partial pulpotomy was performed instead of non-surgical root canal treatment due to uncooperativeness of the patient. Biodentine was used as a pulp capping material. The tooth was restored with resin composite permanent restoration. Six months after the procedure, an intraoral periapical radiograph revealed normal bone features with complete periapical pathology healing and development of intact lamina dura around the mesial and distal roots. The tooth responded normal to electric pulp testing (EPT), cold, percussion, and palpation tests. CONCLUSIONS Periapical pathology involvement having large periapical radiolucency exhibiting PAI score 4 in inflamed dental pulp tooth diagnosed as irreversible pulpitis does not necessitate non-surgical root canal treatment. Partial pulpotomy should be considered as an alternative treatment to promote the return dental pulp and periapical tissue to a healthy condition. Considering a similar approach in older patients would be interesting to gain a more comprehensive understanding of its potential as a treatment method.
Subject(s)
Pulpitis , Pulpotomy , Female , Humans , Aged , Child , Pulpotomy/methods , Pulpitis/surgery , Treatment Outcome , Molar/diagnostic imaging , Molar/surgeryABSTRACT
OBJECTIVES: This study aimed to observe the outcomes of iRoot BP Plus full pulpotomy in primary molars with partial irreversible pulpitis retrospectively. METHODS: Collect 102 cases of primary molars with partial irreversible pulpitis undergoing iRoot BP Plus full pulpotomy from January 2019 to August 2023, with a follow-up period of 24-47 months. Based on the presence of irreversible pulpitis symptoms before surgery, the included cases will be divided into asymptomatic group (n=53) and symptomatic group (n=49). Observe the clinical and imaging success rates of both groups. RESULTS: Clinical success rates were 96.2% and 97.9% in asymptomatic and symptomatic groups, and radiographic success rates were 96.2% and 93.9% respectively. CONCLUSIONS: iRoot BP Plus full pulpotomy can be used for the treatment of primary molars with partial irreversible pulpitis under an enhanced pulpotomy protocol.
Subject(s)
Pulpitis , Pulpotomy , Humans , Pulpotomy/methods , Pulpitis/surgery , Pulpitis/drug therapy , Retrospective Studies , Silicates/therapeutic use , Molar/surgery , Treatment Outcome , Calcium Compounds/therapeutic useABSTRACT
BACKGROUND: Curved root canals are associated with the highest number of procedural errors during endodontic instrumentation. Recently, numerous rotary instruments have been developed, with both manual and automated mechanisms, to facilitate endodontic treatment and manage the complications related to it. OBJECTIVES: The aim of the study was to assess post-endodontic pain after using the HyFlex® EDM OneFile (HEDM), WaveOne® Gold (WOG) and XP-endo® Shaper (XPS) systems in the preparation of curved canals in patients with asymptomatic irreversible pulpitis. MATERIAL AND METHODS: A total of 45 molars with curved canals and asymptomatic irreversible pulpitis were randomly divided into 3 equal groups based on the instrumentation used: HEDM (group A); WOG (group B); and XPS (group C). All teeth were prepared according to the manufacturers' instructions. Postendodontic pain was assessed using the visual analog scale (VAS) at 6, 12, 18, 24, 48, and 72 h after root canal instrumentation. The data was analyzed using the one-way analysis of variance (ANOVA) and the paired-samples t test with the Bonferroni correction, with a p-value of 0.05 set for statistical significance. RESULTS: The highest levels of post-endodontic pain were recorded at 6 h after treatment. Then, the values gradually decreased until the pain nearly vanished after 72 h. No statistically significant differences were observed in the VAS scores between groups A and B. At the same time, group C showed the lowest VAS scores at all follow-up time points. CONCLUSIONS: The use of the XPS system resulted in the lowest pain scores at all follow-ups. The HEDM and WOG groups showed no differences in the pain scores throughout the whole follow-up period.
Subject(s)
Pulpitis , Root Canal Preparation , Humans , Dental Pulp Cavity , Pulpitis/therapy , Pain , Molar/surgeryABSTRACT
BACKGROUND: The preparation of the middle mesial (MM) canal of mandibular molars represents a challenge because it is often curved, narrow, and close to the root concave. The purpose of this study was to evaluate the ex vivo shaping ability of 3 nickel-titanium (NiTi) rotary systems in the MM canal using 3D printed resin tooth replicas. METHODS: A permanent mandibular first molar with a MM canal was acquired from a pool of extracted teeth and reproduced by a 3D printer. The resin tooth replicas (n = 18) were equally assigned to 3 groups for the evaluation of the shaping abilities of 3 NiTi rotary systems (OneShape [OS], Twisted Files [TF], and ProTaper Gold [PTG]) according to the manufacturer's recommendations. The tooth replicas were scanned by micro-computed tomography (micro-CT) twice before and after instrumentation of the mesiobuccal (MB), mesiolingual (ML), and MM root canals. After 3D reconstruction, the canal straightening, change of root canal volume and surface area, the mesial and distal canal wall thickness and canal transportation at the levels of 1, 2, and 3 mm below furcation were assessed. One-way variance analysis and Turkey's post hoc test were used for comparisons of the means among different groups, and paired-t test was used to compare the mesial and distal sides of the mesial roots. RESULTS: As compared with OS and TF, the use of PTG in preparation of MM canals resulted in significantly more straightening of canal curvature (p < 0.05), greater post-instrumentation canal volume and surface area, and thinner mesial and distal remaining canal wall thickness at 1, 2 and 3 mm below furcation (all p < 0.05). Regarding the root canal transportation in the mesiodistal direction, there was no significant difference among the 3 instruments (all p > 0.05) after the preparation of the MB and ML canals. However, in the MM canal, more pronounced transportation was detected in the PTG group at 2 mm below furcation, and in the TF group at 3 mm below furcation as compared with the other 2 systems (both p < 0.05). CONCLUSIONS: 3D printed tooth replicas have the advantages of consistency and can be an ideal model to evaluate the shaping ability of different instruments in the MM canal. OS and TF files performed similarly and both are appropriate for shaping the MM canal, while PTG may cause excessive and uneven resin removal, especially near the furcation, and may lead to root fragility and procedural errors.