Comparing closure compliance and ease of use for consumer product packs designed to reduce access to children.

Child impeding packs are difficult for children to open so protect them from unintended access to hazardous contents inside the pack. However, if packs are difficult for adults to open, in normal usage scenarios, this may result in a higher occurrence of packs being left open. This research explores differences in ease of usage and closure compliance between two types of child impeding packs of liquid laundry detergent capsules. The two packs, "Pinch & Lift" and "Press & Lift", had different opening and closing mechanisms. "Press & Lift" also included an audible "click" signal to confirm complete closure to the user. The research was performed across two studies. In both studies, the packs were used in participants' homes according to their usual storage and usage practices as replacements to their current liquid laundry detergent capsule pack. All participants had small children living with them in their household. In Study 1, self-reported closure and ease of use data was collected from 99 adult participants in Germany. They used each package in their home for 10 days. Study 2 extended Study 1 by measuring closure rates with an objective assessment using in pack sensors for a 10-day period for each pack. Self-reported closure and ease of use data were also collected. Study 2 was conducted with 87 participants in the United Kingdom. Results across both studies showed "Press & Lift" with the audible "Click" close signal to be rated by participants to be significantly easier to open and close and have a higher self-reported closure rate than "Pinch & Lift". In addition, Study 2 results demonstrated higher closure rates using "Press & Lift" based on the sensor-measured closure compliance. Together, the results suggest transition to a pack with a mechanism that is child impeding and easier for an adult to use with an audible closure signal, like the "Press & Lift" system, has potential to reduce child access to a capsule from a pack by reducing the likelihood of the pack being left open by the adult user. Ultimately, such packs could protect children from potential poisoning injury across a range of consumer products.

Suicide mortality following the implementation of tobacco packaging and pricing policies in Korea: an interrupted time-series analysis.

BACKGROUND: To prevent tobacco use in Korea, the national quitline number was added to tobacco packages in December 2012, tobacco prices were raised by 80% in January 2015, and graphic health warning labels were placed on tobacco packages in December 2016. This study evaluated the association of these tobacco packaging and pricing policies with suicide mortality in Korea. METHODS: Monthly mortality from suicide was obtained from Cause-of-Death Statistics in Korea from December 2007 to December 2019. Interrupted time-series analysis was performed using segmented Poisson regression models. Relative risks (RRs) and 95% confidence intervals (CIs) were calculated adjusted for suicide prevention strategies. RESULTS: Suicide mortality was 20 per 1,000,000 in December 2007 and showed a downward trend over the study period. After the implementation of tobacco packaging and pricing policies, suicide mortality immediately declined by - 0.09 percent points (95% CI = - 0.19 to 0.01; P > 0.05) for the national quitline number, - 0.22 percent points (95% CI = - 0.35 to - 0.09; P < 0.01) for tobacco prices, and - 0.30 percent points (95% CI = - 0.49 to - 0.11; P < 0.01) for graphic health warning labels. The corresponding RRs for these post-implementation changes compared with the pre-implementation level were 0.91 (95% CI = 0.83 to 1.00), 0.80 (95% CI = 0.70 to 0.91), and 0.74 (95% CI = 0.61 to 0.90), respectively. Significant associations between tobacco control policies and suicide mortality were observed even when stratified by sex and region. CONCLUSIONS: The findings of this study provide new evidence for an association between tobacco control policies and deaths by suicide. An array of effective tobacco control policies should be considered for prevention programs targeting suicide.

Nicotine exposure from packaged cigarettes in tobacco retail settings.

BACKGROUND: Although many studies on exposure to environmental tobacco smoke from passive smoking have been conducted, most of such studies have only focused on the chemicals produced by active combustion. The current study examined the extent to which uncombusted and packaged cigarettes in cigarette racks at retail stores diffuse airborne nicotine. METHODS: Airborne nicotine samples were collected for 15 days on passive monitors mounted near the indoor cigarette racks (Point 1) and farthest point from the cigarette racks (Point 2) in tobacco retailer stores (N=95) in South Korea (5 months, data collection from January to May in 2022. RESULTS: The average airborne nicotine level was 0.0908 ug/m3 at Point 1 and 0.0345 ug/m3 at Point 2. We found a positive correlation (r=0.647, p <0.001) in nicotine concentration between the two measurement points. The interior size of the target stores was positively correlated (r=0.334, p <0.001) with the within-store difference in nicotine concentration between the two measurement points. The airborne nicotine concentration at Point 1 was statistically significantly higher than at Point 2 (z=-2.326, p=0.020, effect size: 0.2215), especially at larger stores. CONCLUSIONS: Our findings indicate that packaged, unopened, and uncombusted cigarettes in cigarette racks at tobacco retailers emits airborne nicotine, which is a previously unrecognized source of nicotine exposure. This result has implications for policy considerations, such as the potential installation of ventilation systems on cigarette racks or the exploration of alternative packaging methods.

Degradation and environmental assessment of compostable packaging mixed with biowaste in full-scale industrial composting conditions.

The incorporation of representative commercial compostable materials into a full-scale open-air windrow composting process in an industrial site using household-separated biowaste was investigated. Two batches out of the same initial biowaste mixture were studied, one as control and the other containing initially 1.28 wt% of certified compostable plastics. No significant differences in the composting process were revealed. Compostable plastics exhibited a 98 wt% mass loss after 4 months, aligning with industrial composting times. The evolution of the morphology of the materials unveiled polymer specific degradation mechanisms. Both Safety requirements for organic farming were met. Ecotoxicity tests showed no adverse effects, agronomic fertilizing and amending quality was high, the materials compost even enhancing barley growth. The ecological impact assessment demonstrated an advantage for composting over incineration for seven of the eight indicators. In conclusion, this study shows the successful integration of compostable materials into industrial composting, upholding product safety and quality.

Material flow analysis and statistical entropy evaluation of plastic packaging for express delivery in China.

Encouraging the recycling of plastic packaging materials in express delivery is a necessary step toward environmentally friendly industrial development. In this study, we present a framework for analyzing the flow of materials in express plastic packaging, from production and manufacturing to consumption and recycling. In examining the use of recycled materials in post-consumer express plastic packaging and the destination of consumer packaging waste in 2020 and 2021, we found that 44.4% (1613.6 Gg) of the studied express plastic packaging was incinerated. Additionally, approximately 1296.6 Gg of express plastic packaging flowed into rural areas. Our calculations showed that the ΔRSE in 2020 was 15.1%, and on the condition that 25% separated collection with 80% recycling, ΔRSE would be - 0.5%. Results verified that separated collection is an important step in the recycling strategy for packaging materials. Survey data from universities in Beijing indicate that currently, 26% of college students are participating in the separate collection of packaging.

Recovery of plastic packaging from mixed municipal solid waste. A case study from Austria.

Austria must recycle more packaging materials. Especially for plastic packaging waste, significant increases are necessary to reach the EU recycling targets for 2025 and 2030. In addition to improving separate collection and introducing a deposit system for specific fractions, the share of plastic packaging in mixed municipal solid waste (MSW) could be utilized. In Austria, about 1.8milliontonnes of mixed MSW are generated. This includes about 110,000 t/a of plastic packaging waste. Most of the mixed MSW (94 %) is sent directly or via residues from pre-treatment, such as mechanical-biological treatment or waste sorting, to waste incineration. While materials such as glass and metals can also be recovered from the bottom ash, combustible materials such as plastics must be recovered before incineration. This work aims to evaluate the recovery potential of plastic packaging waste in mixed MSW with automated waste sorting. For this purpose, two of the largest Austrian waste sorting plants, with a total annual throughput of about 280,000 t/a, were investigated. The investigation included regular sampling of selected output streams and sorting analysis. The results show that the theoretical recovery potential of plastic packaging from these two plants is 6,500 t/a on average. An extrapolation to Austria results in a potential of about 83,000 t/a. If losses due to further treatment, such as sorting and recycling, are considered, about 30,000 t/a of recyclate could be returned to plastic production. This would correspond to an increase in plastic packaging recycling rate from 25 % to 35 %.

A data mining approach to analyze the role of biomacromolecules-based nanocomposites in sustainable packaging.

Recent decades have witnessed a surge in research interest in bio-nanocomposite-based packaging materials, but still, a lack of systematic analysis exists in this domain. Bio-based packaging materials pose a sustainable alternative to petroleum-based packaging materials. The current work employs bibliometric analysis to deliver a comprehensive outline on the role of bio nanocomposites in packaging. India, Iran, and China were revealed to be the top three nations actively engaged in this domain in total publications. Islamic Azad University in Iran and Universiti Putra Malaysia in Malaysia are among the world's best institutions in active research and publications in this field. The extensive collaboration between nations and institutions highlights the significance of a holistic approach towards bio-nanocomposite. The National Natural Science Foundation of China is the leading funding body in this field of research. Among authors, Jong whan Rhim secured the topmost citations (2234) in this domain (13 publications). Among journals, Carbohydrate Polymers secured the maximum citation count (4629) from 36 articles; the initial one was published in 2011. Bio nanocomposite is the most frequently used keyword. Researchers and policymakers focussing on sustainable packaging solutions will gain crucial insights on the current research status on packaging solutions using bio-nanocomposites from the conclusions.

Research progress of protein complex systems and their application in food: A review.

Among the common natural biomolecules, the excellent properties of proteins have attracted extensive attention from researchers for functional applications, however, in native form proteins have many limitations in the performance of their functional attribute. However, with the deepening of research, it has been found that the combination of natural active substances such as polyphenols, polysaccharides, etc. with protein molecules will make the composite system have stronger functional properties, while the utilization of pH-driven method, ultrasonic treatment, heat treatment, etc. not only provides a guarantee for the overall protein-based composite system, but also gives more possibilities to the protein-composite system. Protein composite systems are emerging in the fields of novel active packaging, functional factor delivery systems and gel systems with high medical value. The products of these protein composite systems usually have high functional properties, mainly due to the interaction of the remaining natural active substances with protein molecules, which can be broadly categorized into covalent interactions and non-covalent interactions, and which, despite the differences in these interactions, together constitute the cornerstone for the stability of protein composite systems and for in-depth research.

The effect of branded versus standardized e-cigarette packaging and device designs: an experimental study of youth interest in vaping products.

OBJECTIVES: Standardized ('plain') packaging is effective in reducing the appeal of cigarettes among young people. This study examined the impact of plain packaging and brand imagery on interest in trying e-cigarettes among youth. STUDY DESIGN: Experimental design. METHODS: Two online experiments were conducted in February 2020 as part of the ITC Youth Tobacco & Vaping Survey, conducted with 13,624 16- to 19-year-olds in Canada, England, and the USA. In the between-group Experiment 1, participants were randomized to view a set of 3 e-cigarette brands, in either their original external packaging ('branded' condition) or standardized olive-green packaging ('standardized' condition), and asked to select the product they would be most interested in trying. The within-group Experiment 2 examined brand imagery directly on devices, including potential differences in appeal among subgroups. Each participant viewed 4 pod-style e-cigarette devices: one 'plain' and 3 in colourful 'skins'. Logistic regression models were conducted to test the effect of condition, adjusting for demographics, smoking and vaping status. RESULTS: In Experiment 1, participants in the 'standardized' packaging condition were significantly more likely to indicate 'I have no interest in trying any of these products' (72.3%) than those in the 'branded' condition (66.9%, AOR 1.45, 95% CI 1.33-1.59). Experiment 2 results indicated differences in e-cigarette appeal by sex in the selection of male- and female-oriented designs, and by cannabis use for a Rastafarian-themed design. CONCLUSIONS: Brand imagery on e-cigarettes can target products to specific subgroups. Removal of imagery, in the form of standardized packaging, has the potential to reduce interest in trying e-cigarettes among young people.

Insights into plastic food packaging waste sorting behaviour: A focus group study among consumers in Germany.

Despite international efforts to foster the circular economy, plastic waste remains a major environmental problem. In the circular economy, the success of a waste management system depends, inter alia, on consumers properly sorting their plastic waste. Yet mis-sorting of plastic food packaging waste happens routinely. We sought to find out why and to outline the ways consumers prefer to receive information about waste sorting procedures. Tailoring information to consumer preferences can improve the effectiveness of waste management policy. Using the Motivation Opportunity Ability (MOA) framework to explain consumer behaviour, we conducted focus group discussions in two German cities. Our findings suggest that more accurate information and financial incentives best motivate consumers to sort waste correctly. Uncertainty and confusion over the packaging material are the most severe hindrances to correct sorting behaviour. The Internet and social media are preferred most for acquiring information on how to sort plastic food packaging correctly. Policymakers can use our results to adjust packaging and waste management regulations to help eliminate confusion among consumers and to facilitate their recycling intentions. Food industry practitioners and company decision makers can use our results to adjust their plastic packaging features to better match consumer preferences for easily recyclable waste.

Can a health warning label diminish the persuasive effects of health-oriented nutrition advertising on ready-to-drink alcohol product packaging? A randomized experiment.

BACKGROUND AND AIMS: A health warning label (HWL) cautioning about the link between alcohol and cancer may be able to communicate alcohol risks to consumers and potentially counter health-oriented nutrition advertising on ready-to-drink alcoholic beverages. This study aimed to examine the independent and combined effects of nutrient content claims (e.g. 0 g sugar) and a HWL on perceived product characteristics and intentions to consume, and whether these effects differed by gender and age. DESIGN: A between-subjects randomized experiment. Participants were randomized to view one of six experimental label conditions: nutrient content claims plus nutrition declaration (NCC + ND), ND only, NCC + ND + HWL, ND + HWL, HWL only and no NCC, ND or HWL, all on a ready-to-drink (RTD) vodka-based soda container. SETTING AND PARTICIPANTS: Alcohol consumers (n = 5063; 52% women) in Canada aged 18-64 recruited through a national online panel. MEASUREMENTS: Participants completed ratings of perceived product characteristics, perceived product health risks, and intentions to try, buy, binge and drink the product. FINDINGS: Compared with the reference condition NCC + ND (current policy scenario in Canada), the other five experimental label conditions were associated with lower ratings for perceiving the product as healthy. All experimental conditions with a HWL were associated with lower product appeal, higher risk perceptions and reduced intentions to try, buy and binge. The experimental condition with a HWL only was associated with intentions to consume fewer cans in the next 7 days (ß = -0.72, 95% confidence interval [CI] = -1.37,-0.08) versus the reference. Few interactions were observed, suggesting that label effects on outcomes were similar by gender and age. CONCLUSIONS: Health warning labels on alcohol packaging appear to be associated with lower product appeal, higher perceived health risks and reduced consumption intentions, even in the presence of nutrient content claims.

Biosynthesis and Biodegradation-Eco-Concept for Polymer Materials.

Polymers have become essential for various aspects of modern life, including packaging, transportation, and electronics [...].

Flexible cellulose nanofibers/MXene composite films for UV-shielding packaging.

Cellulose nanofibers (CNF) based films are promising packaging materials, but the lack of special functions (especially UV-shielding property) usually restrict their further applications. In this work, MXene was incorporated into the CNF film by a direct solvent volatilization induced film forming method to study its UV-shielding property for the first time, which avoided the using of a vacuum filtration equipment. The composite films containing glycerin could be folded repeatedly without breaking, showing good flexibility. The structure and properties of MXene/CNF composite films (CMF) were characterized systematically. The results showed that MXene distributed uniformly in the CNF film matrix and there was strong hydrogen bonding interaction between CNF and MXene. The tensile strength and Young's modulus of the composite films could reach 117.5 MPa and 2.23 GPa, which was 54.1 % and 59.2 % higher than those of pure CNF film, respectively. With the increase of MXene content, both the UVA and UVB shielding percentages increased significantly from 17.2 % and 25.5 % to 100.0 %, showing excellent UV-shielding property. Moreover, CMF exhibited a low oxygen permeability (OP) value of 0.39 cc µm d-1 m-2 kPa-1, a low water vapor permeability (WVP) value of 5.13 × 10-11 g-1s-1Pa-1 and a high antibacterial rate against E. coli (94.1 % at 24 h), showing potential application in the packaging field.

Polyethylene terephthalate waste derived nanomaterials (WDNMs) and its utilization in electrochemical devices.

Plastics are a vital component of our daily lives in the contemporary globalization period; they are present in all facets of modern life. Because the bulk of synthetic plastics utilized in the market are non-biodegradable by nature, the issues associated with their contamination are unavoidable in an era dominated by polymers. Polyethylene terephthalate (PET), which is extensively used in industries such as automotive, packaging, textile, food, and beverages production represents a major share of these non-biodegradable polymer productions. Given its extensive application across various sectors, PET usage results in a considerable amount of post-consumer waste, majority of which require disposal after a certain period. However, the recycling of polymeric waste materials has emerged as a prominent topic in research, driven by growing environmental consciousness. Numerous studies indicate that products derived from polymeric waste can be converted into a new polymeric resource in diverse sectors, including organic coatings and regenerative medicine. This review aims to consolidate significant scientific literatures on the recycling PET waste for electrochemical device applications. It also highlights the current challenges in scaling up these processes for industrial application.

Development of biodegradable packaging films from carboxymethyl cellulose and oxidised natural rubber latex.

The present study investigates the biopolymer packaging film developed from carboxymethyl cellulose (CMC) with varying concentrations of natural rubber latex (NR) and oxidised natural rubber latex (ONR) using the solvent casting method. The physicochemical properties of the CMC/NR and CMC/ONR film samples were characterised using FTIR, TG/DTA, DSC, SEM, and XRD analysis. The increased concentration of NR and ONR helped to enhance mechanical characteristics, superior UV resistance, enhanced resistance to oxygen and water vapour penetration, improved dimensional stability, and a reduction in the moisture retention ability of the film samples. The CMC sample film, incorporated with 1.5 g ONR, was found to have more than a 100 % increase in the tensile strength. The tensile value increased from 21.56 MPa to 48.36 MPa, with the highest young modulus of 0.73 GPa and elastic stability of 7.14 %. The incorporation of NR and ONR significantly reduced the super water absorbency nature of the CMC film, and the moisture content values reduced from 21.6 % to ≅ 0.15 % for ONR-incorporated film. Additionally, the CMC/NR and CMC/ONR films exhibited high optical transparency values and were found to be fast biodegradable, substantiating their potential use in various packaging applications. Application of these materials in perishable fruit packaging has shown significant enhancement in shelf life, highlighting their practical efficiency and potential for sustainable packaging solutions.

Quality comparison of plastic packaging waste from different separation systems: Result enhancement with non-negative matrix factorization of FTIR spectra.

Whether plastic packaging waste is disposed of in different bins (source separation, S) or in a single bin (post source separation, P) is generally assumed to impact the waste stream's quality. To elucidate this question, we evaluated the quality of LDPE, HDPE, and PP plastic waste from both separation systems (S and P) through a concise analytical strategy. The materials received similar treatment after collection (e.g., washing, NIR-sorting). A multivariate approach to ATR-FTIR spectroscopy was developed to assess their material composition and the effect of washing. Results were complemented by TGA, DSC, and py-GC/MS analysis. The material performance was investigated by a lab-scale extrusion and granulation, followed by an assessment of the mechanical properties and the melt volume rate. Our study reveals the HDPE materials to be of good quality, regardless of their source. For LDPE and PP, the P-materials are fractionally more contaminated after washing. Both PP-materials display poor material performance with highly fluctuating elongations-at-break (between 30% and 380%). S-LDPE was found to contain more polymeric impurities than P-LDPE. We conclude that the quality depends strongly on the material type and on the treatment after collection (washing, sorting). The multivariate approach to FTIR data evaluation we propose aims at simplifying the quality evaluation of polyolefin waste plastics and may serve as a basis for future work in this field.

Composition of public waste - a case study from Austria.

Waste from public places like parks, pedestrian zones or sidewalks is a visible yet unexploited waste stream. Publications and information on the amounts and makeup of this waste flow are very scarce. To evaluate the resource potential and enable waste management planning, this study aims to assess the quality and quantity of public waste in a detailed waste characterisation campaign. For the first time, an analysis at this level of detail was conducted in a medium-sized town (25,000 inhabitants) in Austria. The sampling campaign included the whole town area. In total, almost 1000 kg of waste was sorted in up to 88 different fractions, which allows the detailed composition of, for example, packaging waste and single-use plastics to be delineated. We found that the amount of waste collected in public street bins is approximately 2.6 % of the total mixed municipal solid waste, resulting in 4.1 kg of public waste per inhabitant annually. The vast majority of this waste is currently collected as mixed waste. The results indicate a high share (52 %) of recyclable materials (glass, metal, paper and lightweight packaging) in mixed public waste, most of which is packaging (44 % of total waste). Other large shares include dog feces (18 % of total waste) and biogenic waste (17 % of total waste). The results lay the foundation for further investigations into, for example, exploiting recycling potential or evaluating possible improvements in separate waste collection in public spaces. Further, the collected data serve as an essential knowledge basis for policymakers and local authorities.