Surgical Management of Persistent or New Symptoms After Hiatal Hernia Repair.

Following a hiatal hernia repair, patients can present with recurrent or new symptoms. Symptoms can occur anywhere from weeks to years after surgery. These may include recurrent reflux, dysphagia, regurgitation, weight loss, or deteriorating quality of life. While nonoperative management can be pursued in some patients, reoperation may be the only option in select patients. A thorough preoperative workup, including a repeat esophagram, upper endoscopy, +/- chest computed tomography (CT) scan, manometry, pH probe, and/or gastric emptying study, is warranted to better understand the pathophysiology of the presenting symptoms. If a recurrent hernia, slipped, or migrated wrap is identified, surgery is considered. Pseudoachalasia must also be ruled out if obstructive symptoms are observed at the hiatus. Such an exhaustive workup is indeed necessary to ensure accurate diagnosis and optimal outcome. In addition, an understanding of the factors that may have led to the recurrence will increase the chances of a successful reoperation. Although a technically demanding procedure, redo hiatal hernia repair utilizing a minimally invasive approach is increasingly being employed with promising outcomes. Herein, the steps of a redo hiatal hernia repair via a minimally invasive approach will be outlined and detailed.

Challenges of enbloc mid-sacrectomy as redo surgery for sacral chordoma: a case report.

Enbloc Sacrectomy is the procedure of choice for aggressive sacral lesions but not widely practiced in Pakistan, both by Neurosurgeons and Orthopaedic surgeons. Only one case has been mentioned in indexed local literature so far and that too not operated in Pakistan. The case of a 27 year old neurologically intact male is presented. He had a huge residual mass and midline non-healing wound after two attempts at intralesional debulking and one full course of local irradiation. He presented to the Mayo Hospital, Lahore on 29th December 2021 for a redo surgery of sacral chordoma. A marginal excision was achieved utilizing posterior only approach. This case will help to understand the key steps in enbloc mid-Sacrectomy and importance of involving multidisciplinary team for ensuring adequate wound closure.

Redo partial aortic root remodelling in type A dissection with an aorto-left atrial fistula.

A 72-year-old male with a history of a triple-vessel coronary artery bypass graft years ago presented with a DeBakey type 2 aortic dissection and an aorto-left atrial fistula with patent bypass grafts (left internal mammary artery and saphenous vein grafts). He developed pulmonary oedema and required intubation. The right axillary artery was cannulated. After the ascending aorta and left internal mammary artery were clamped, the aorta was transected, leaving aortic tissue around two saphenous vein grafts as two separate patches. An entry tear was found adjacent to the proximal anastomosis of the saphenous vein graft to the posterior descending artery. A fistula, which was located between a false lumen in the non-coronary sinus and the dome of the left atrium, was primarily closed. Because the adventitia was thinned out in the non-coronary sinus due to aortic dissection, partial aortic root remodelling was performed with resuspension of the commissures. Hemiarch repair was performed under moderate hypothermia and unilateral antegrade cerebral perfusion. After systemic perfusion was resumed, the locations of the saphenous vein graft buttons were determined. The ascending graft was cross-clamped again; the saphenous vein graft to the obtuse marginal branch graft was reimplanted using the Carrel patch technique while a saphenous vein graft to the posterior descending artery required interposition of a 10-mm Dacron graft to accommodate the length.

Converting to reverse shoulder arthroplasty from primary anatomic shoulder arthroplasty and fracture hemiarthroplasty: a radiographic and clinical outcome analysis at 8-years.

INTRODUCTION: Revision shoulder arthroplasty can be challenging. One of the main considerations for surgeons is the type of implant that was placed in the initial surgery. Anatomic shoulder arthroplasty (ASA) is used for cases of osteoarthritis as well as for fractures of the humeral head. Hemiarthroplasty can be used for complex proximal humerus fractures. The purpose of this study is to determine whether there is a difference in clinical and radiographic outcomes between patients that failed primary fracture hemiarthroplasty (FHA), or ASA for osteoarthritis and then required reoperation with a conversion to reverse shoulder arthroplasty (RSA). METHODS: Patients with failed anatomic shoulder replacement, who had undergone conversion to RSA, were enrolled after a mean follow-up of 107 (85-157) months. Two different groups, one with failed ASA implanted for osteoarthritis and one with failed FHA, were created. At follow-up patients were assessed with standard radiographs and clinical outcome scores. RESULTS: Twenty-nine patients (f = 17, m = 12; 51%) suffered from a failed ASA (Group A), while the remaining 28 patients (f = 21, m = 74; 49%) had been revised due to a failed FHA (Group B). Patients of Group B had a poorer Constant score (Group A: 60 vs. Group B: 46; p = 0.02). Abduction (Group A: 115° vs. Group B: 89°; p = 0.02) was worse after conversion of a failed FHA to RSA in comparison to conversions of failed ASA. The mean bone loss of the lateral metaphysis was higher in patients with failed FHA (Group A: 5 mm vs. Group B: 20 mm; p = 0.0). CONCLUSION: The initial indication for anatomic shoulder arthroplasty influences the clinical and radiological outcome after conversion to RSA. Conversion of failed FHA to RSA is related to an increased metaphyseal bone loss, decreased range of motion and poorer clinical outcomes when compared to conversions of failed ASA implanted for osteoarthritis. LEVEL OF EVIDENCE: III Retrospective Cohort Comparison Study.

Surgical Management of Periprosthetic Joint Infections in Hip and Knee Megaprostheses.

Periprosthetic joint infection is a feared complication after the megaprosthetic reconstruction of oncologic and non-oncologic bone defects of including the knee or hip joint. Due to the relative rarity of these procedures, however, optimal management is debatable. Considering the expanding use of megaprostheses in revision arthroplasty and the high revision burden in orthopedic oncology, the risk of PJI is likely to increase over the coming years. In this non-systematic review article, we present and discuss current management options and the associated results focusing on studies from the last 15 years and studies from dedicated centers or study groups. The indication, surgical details and results in controlling infection are presented for debridement, antibiotics, irrigation and retention (DAIR) procedure with an exchange of the modular components, single-stage implant exchange, two-stage exchanges and ablative procedures.

Enhancing the data capture of periprosthetic joint infections in the Danish Knee Arthroplasty Registry: validity assessment and incidence estimation.

BACKGROUND AND PURPOSE: Revisions due to periprosthetic joint infection (PJI) are underestimated in national arthroplasty registries. Our primary objective was to assess the validity in the Danish Knee Arthroplasty Register (DKR) of revisions performed due to PJI against the Healthcare-Associated Infections Database (HAIBA). The secondary aim was to describe the cumulative incidences of revision due to PJI within 1 year of primary total knee arthroplasty (TKA) according to the DKR, HAIBA, and DKR/HAIBA combined. METHODS: This longitudinal observational cohort study included 56,305 primary TKAs (2010-2018), reported in both the DKR and HAIBA. In the DKR, revision performed due to PJI was based on pre- and intraoperative assessment disclosed by the surgeon immediately after surgery. In HAIBA, PJI was identified from knee-related revision procedures coinciding with 2 biopsies with identical microbiological pathogens. We calculated the sensitivity, specificity, positive predictive value (PPV), and negative predictive value (NPV) of revision due to PJI in the DKR (vs. HAIBA, within 1 year of TKA) with 95% confidence intervals (CI). Cumulative incidences were calculated using the Kaplan-Meier method. RESULTS: The DKR's sensitivity for PJI revision was 58% (CI 53-62) and varied by TKA year (41%-68%) and prosthetic type (31% for monoblock; 63% for modular). The specificity was 99.8% (CI 99.7-99.8), PPV 64% (CI 62-72), and NPV 99.6% (CI 99.6-99.7). 80% of PJI cases not captured by the DKR were caused by non-reporting rather than misclassification. 33% of PJI cases in the DKR or HAIBA were culture-negative. Considering potential misclassifications, the best-case sensitivity was 64%. The cumulative incidences of PJI were 0.8% in the DKR, 0.9% in HAIBA, and 1.1% when combining data. CONCLUSION: The sensitivity of revision due to PJI in the DKR was 58%. The cumulative incidence of PJI within 1 year after TKA was highest (1.1%) when combining the DKR and HAIBA, showing that incorporating microbiology data into arthroplasty registries can enhance PJI validity.

A systematic review and meta-analysis of hybrid vs. cemented stems - which method is more optimal for revision total knee arthroplasty?

INTRODUCTION: The number of primary and revision Total Knee Arthroplasty (TKA) cases are expected to increase in future. There are various advantages and disadvantage to employing either of the two main types of stem fixation methods - cemented or hybrid technique. This review aimed to study the most optimal fixation method for revision TKAs by comparing radiological outcomes and re-revision rates. METHODS: A systematic review and meta-analysis was performed using PubMed and Cochrane Library from 2010 to identify studies explicitly comparing outcomes between cemented against hybrid fixation revision TKA techniques, with a minimum follow up of at least 24 months. A total of 8 studies was included in this review. Egger's test and visual inspection of the funnel plot did not reveal publication bias. RESULTS: There was no statistically significant difference in radiological failure and loosening (OR 0.79, CI 0.37-1.66, I2 = 29%, p = 0.22), all causes of re-revision (OR 1.03, CI 0.73-1.44, I2 = 0%, p = 0.56) and aseptic revision (OR 0.74, CI 0.27-2.02, I2 = 0%, p = 0.41) between cemented and hybrid techniques. Functional and pain outcomes compared between the two fixation techniques were largely similar across the studies included in this meta-analysis. CONCLUSION: Despite a trend favouring hybrid stems in revision TKA, current evidence revealed that radiological outcomes and re-revision rates are largely similar between cemented and hybrid fixation techniques.

From adjustable gastric banding to Roux-en-Y gastric bypass - case report.

INTRODUCTION: Adjustable gastric banding (AGB) used to be a popular bariatric procedure. However, it fails in more than half of those operated on in the long term, becomes ineffective and must be removed. Therefore, the use of AGB has been in decline globally. Sleeve gastrectomy (SG) and Roux-en-Y gastric bypass (RYGB) are the most used bariatric revision surgeries when AGB is removed. CASE REPORT: We present the case of a woman after AGB removal and conversion to SG who developed a stenosis of the sleeve. Therefore, a decision was made to convert to RYGB with a good effect. CONCLUSION: Revisional procedures are more technically challenging than primary procedures and have higher complication rates. The most performed revisional operations include SG and RYGB. Stenosis of the sleeve can occur after SG, with a negative impact on the patient's nutritional status and quality of life. This can be managed by endoscopic dilatation, and where this solution proves ineffective, RYGB can be indicated.

Passive Biotelemetric Detection of Tibial Debonding in Wireless Battery-Free Smart Knee Implants.

Aseptic loosening is the dominant failure mechanism in contemporary knee replacement surgery, but diagnostic techniques are poorly sensitive to the early stages of loosening and poorly specific in delineating aseptic cases from infections. Smart implants have been proposed as a solution, but incorporating components for sensing, powering, processing, and communication increases device cost, size, and risk; hence, minimising onboard instrumentation is desirable. In this study, two wireless, battery-free smart implants were developed that used passive biotelemetry to measure fixation at the implant-cement interface of the tibial components. The sensing system comprised of a piezoelectric transducer and coil, with the transducer affixed to the superior surface of the tibial trays of both partial (PKR) and total knee replacement (TKR) systems. Fixation was measured via pulse-echo responses elicited via a three-coil inductive link. The instrumented systems could detect loss of fixation when the implants were partially debonded (+7.1% PKA, +32.6% TKA, both p < 0.001) and fully debonded in situ (+6.3% PKA, +32.5% TKA, both p < 0.001). Measurements were robust to variations in positioning of the external reader, soft tissue, and the femoral component. With low cost and small form factor, the smart implant concept could be adopted for clinical use, particularly for generating an understanding of uncertain aseptic loosening mechanisms.

Conversion of failed revision total knee arthroplasty in arthrodesis with modular nail maintaining the uncemented femoral stem in patient with extensor mechanism insufficiency: a case report.

BACKGROUND: The transition from revision total knee arthroplasty (RTKA) to arthrodesis involves the replacement of cemented femoral and tibial stems with a modular nail designed for arthrodesis. This conversion process is associated with challenges such as bone loss, blood loss, and prolonged surgical durations. Effectively addressing these complexities through a less invasive surgical approach could be pivotal in enhancing patient outcomes and minimizing associated complications. CASE PRESENTATION: A 75-year-old white Caucasian female patient with a revision total knee arthroplasty (RTKA) performed with a modular uncemented rotating-hinge system, reporting an history of recurrent patellar dislocation, was referred to our institution after a fall resulting in periprosthetic tibial plateau fracture. The fracture was treated with open reduction and internal fixation, but afterwards the patient had been unable to walk again. Tibial stem was mobilized, and extensor mechanism was insufficient due to chronic incomplete quadriceps tendon rupture. The femoral stem was stable, so we decided to convert the rotating-hinge in a arthrodesis with an uncemented modular knee fusion nail maintaining the previous femoral stem. CONCLUSIONS: The result was a successful arthrodesis with minimal bone and blood loss, reduced operative time, and optimal functional outcome at the one-year follow-up. This case highlights the advantage of using a modular knee revision platform system that gives the opportunity to convert a RTKA in arthrodesis.

Application of Piezosurgery in Revision Surgery through Posterior Approach for Infection after Percutaneous Vertebral Augmentation: Technique Note with Case Series.

OBJECTIVES: Pyogenic spondylitis after vertebral augmentation (PSVA) is a severe complication and even threatens the life of patients. How to deal with infectious bone cement is a big problem for surgeons. The application of piezosurgery has advantages in removal the infectious bone cement in limb bone and spinal laminectomy, but it is rarely used in PSVA. So, the present study aimed to introduce the application of piezosurgery in revision surgery for PSVA and report the preliminary radiological and clinical results. METHODS: The data of nine patients with PSVA who had undergone revision surgery were retrospectively reviewed between May 2017 and January 2023 in our hospital. The technique of removal of infectious bone cement and lesion by piezosurgery and the reconstruction of the spinal stability were described, and the operation time and intraoperative blood loss were recorded. Postoperatively, radiographs and computed tomography scans were reviewed to evaluate the condition of bone cement removal, control of infection, and bone fusion. Oswestry disability index (ODI) and visual analog scale (VAS) were assessed pre- and postoperatively, and clinical outcomes were assessed using Odom's criteria. RESULTS: All patients achieved satisfactory tainted bone cement cleaning and restoration of spinal alignment. The surgical time was 258.8 ± 63.2 (160-360) min, and the intraoperative blood loss was 613.3 ± 223.8 (300-900) mL. The VAS score decreased from 7.0 (6-8) points preoperatively to 2.4 (1-4) points postoperatively. The ODI index decreased from 71% (65%-80%) preoperatively to 20% (10%-30%) postoperatively. The patient's VAS and NDI scores after operation were significantly improved compared with those before surgery (p ≤ 0.05). Odom's outcomes were good for all patients in the last follow-up, and all patients reported satisfactory results. CONCLUSIONS: Piezosurgery can effectively remove large blocks of infectious bone cement through a posterior approach while avoiding nerve and spinal cord damage. We cautiously suggest that a one-stage posterior approach using piezosurgery is an alternative option for surgical treatment of PSVA.

Utilizing an antibiotic-eluting articulated cemented spacer in the two-stage management of infected total hip arthroplasty: a technical note.

Two-stage revision is generally preferred to eradicate chronic periprosthetic infections after total hip arthroplasty (THA) because of its good infection control and promising results. During two-stage revision, a temporary antibiotic-impregnated cement spacer was initially used for the local delivery of antibiotics, thereby reducing the risk of infection recurrence. Many researchers have reported various techniques for fabricating cemented spacers; however, there is no established standard technique. We share our cost-effective and easily reproducible technique for creating an articulated cemented spacer for managing infected THA.

Primary and revision reverse total shoulder arthroplasty using a patient-matched glenoid implant for severe glenoid bone deficiency.

BACKGROUND: Severe glenoid bone loss in the setting of both primary and revision reverse total shoulder arthroplasty (rTSA) continues to remain a significant challenge. The purpose of this study was to report on radiographic and clinical outcomes of primary and revision rTSA using a patient-matched, 3-dimensionally printed metal glenoid implant to address severe glenoid bone deficiency. This is a follow-up study to previously reported preliminary results. METHODS: A retrospective review was performed on 62 patients with severe glenoid bone deficiency who underwent either primary or revision rTSA using the Comprehensive Vault Reconstruction System (VRS) (Zimmer Biomet) at a single institution. Preoperative and postoperative values for the Disabilities of the Arm, Shoulder and Hand (DASH), Constant, American Shoulder and Elbow Surgeons Standardized Shoulder Assessment Form (ASES), Simple Shoulder Test (SST), Single Assessment Numeric Evaluation (SANE), and visual analog scale (VAS) pain scores as well as active range of motion (ROM) were collected and compared using the Wilcoxon signed rank test with the level of statistical significance set at P < .05. The percentage of patients achieving minimal clinically important difference (MCID) and substantial clinical benefit (SCB) was also calculated. RESULTS: Fifty-five of 62 shoulders (88.7%) were able to be contacted at a minimum of 2 years postoperatively, with 47 of 62 (75.8%) having complete clinical and radiographic follow-up with a mean age of 67.5 years (range, 48-85 years) and follow-up of 39.2 months (range, 25-56 months). There were 19 primary and 28 revision rTSAs. Significant improvements were seen in mean active forward flexion (63.1° ± 30.3° to 116.8° ± 35°), abduction (48.1° ± 16.1 to 76.2° ± 13.4°) (P < .001), external rotation (16° ± 23.7° to 32.1° ± 24.5°) (P < .005), DASH (59.9 ± 17.7 to 35.7 ± 24.3), Constant (23.4 ± 13.1 to 53.1 ± 17.4), ASES (27.8 ± 16.2 to 69.1 ± 25.2), SST (3.3 ± 2.5 to 7.6 ± 3.5), SANE (28.9 ± 18.3 to 66.7 ± 21.2), and VAS pain (7.1 ± 2.4 to 1.8 ± 2.6) scores (P < .001). MCID and SCB was achieved in a majority of patients postoperatively. The overall complication rate was 29.1%, with only 1 baseplate failure. CONCLUSION: This study demonstrates promising evidence that the VRS implant can be used as a viable option to achieve clinically important improvement in a majority of patients treated for severe glenoid bone deficiency with rTSA in both the primary and revision setting.

Effect of corticosteroids on ischemia-reperfusion injury of deep inferior epigastric perforator flap after re-exploration for anastomosis thrombosis: A prospective randomized trial.

Patients undergoing breast reconstruction with the deep inferior epigastric perforator (DIEP) flap are at risk of arterial and venous thrombosis, necessitating flap salvage surgery. However, this carries the risk of ischemia-reperfusion injury (IRI) and potential significant partial or complete flap loss. The objective of this study was to evaluate the potential benefit of corticosteroids in reducing IRI related complications in DIEP flaps that are returned to the operation theater for attempted salvage after venous or arterial failure. A double-blinded prospective randomized study was conducted between January 2012 and January 2023 on patients scheduled for secondary unilateral breast reconstruction using the DIEP flap technique. Patients were included if they developed post-operative venous or arterial flap thrombosis and experienced DIEP flap IRI following operative take-back and anastomosis revision. The treatment group (TG) received a 5-day course of corticosteroids, while the control group (CG) did not receive any specific treatment. Forty-six patients were enrolled in the study. In the CG, two cases of total flap loss and eight cases of partial flap necrosis were observed, while the TG had only 1 case of partial flap necrosis (p < 0.05). The complete resolution of clinical signs of IRI occurred within 13 ± 2.1 days for the TG and 21 ± 3.5 days for the CG (p = 0.00001). The TG had a significantly shorter hospital stay (11.13 ± 0.38 days) compared with the CG (15.47 ± 1.27 days; p < 0.0001). Targeted corticosteroid therapy following a salvage procedure for vascular thrombosis in DIEP flaps has shown promise as an effective treatment for subsequent IRI. This approach may be considered as a viable option for managing IRI in free flaps. However, further studies involving a larger number of patients are required to substantiate our hypothesis.

Rod fracture after multiple-rod technique for adult spinal deformity: a case report.

Here we report the case of a 71-year-old woman who complained of lower back and left leg pain due to rod fracture following instrumented fusion using the lateral lumbar interbody fusion and multi-rod technique to treat adult spinal deformity. Radiographic images revealed bilateral rod fractures at L4-5 and pseudoarthrosis at L2-5; lower lumbar lordosis was minimal, but upper lumbar hyperlordosis was noted. The patient underwent revision surgery, which included posterior spinal instrument replacement, L3-4 and L4-5 lateral lumbar interbody fusion cage removal, and L4 vertebral body replacement via the anterior approach. This is a rare case of reoperation with the multi-rod technique. Revision surgery should be performed in consideration of the proportion of lumbar lordosis and anterior bony fusion as the posterior component is resected and bony fusion can only be achieved anteriorly.

Two-stage revision for periprosthetic joint infection after hip and knee arthroplasty.

Aims: Histology is widely used for diagnosis of persistent infection during reimplantation in two-stage revision hip and knee arthroplasty, although data on its utility remain scarce. Therefore, this study aims to assess the predictive value of permanent sections at reimplantation in relation to reinfection risk, and to compare results of permanent and frozen sections. Methods: We retrospectively collected data from 226 patients (90 hips, 136 knees) with periprosthetic joint infection who underwent two-stage revision between August 2011 and September 2021, with a minimum follow-up of one year. Histology was assessed via the SLIM classification. First, we analyzed whether patients with positive permanent sections at reimplantation had higher reinfection rates than patients with negative histology. Further, we compared permanent and frozen section results, and assessed the influence of anatomical regions (knee versus hip), low- versus high-grade infections, as well as first revision versus multiple prior revisions on the histological result at reimplantation. Sensitivity, specificity, positive predictive value (PPV), negative predictive value (NPV), chi-squared tests, and Kaplan-Meier estimates were calculated. Results: Overall, the reinfection rate was 18%. A total of 14 out of 82 patients (17%) with positive permanent sections at reimplantation experienced reinfection, compared to 26 of 144 patients (18%) with negative results (p = 0.996). Neither permanent sections nor fresh frozen sections were significantly associated with reinfection, with a sensitivity of 0.35, specificity of 0.63, PPV of 0.17, NPV of 0.81, and accuracy of 58%. Histology was not significantly associated with reinfection or survival time for any of the analyzed sub-groups. Permanent and frozen section results were in agreement for 91% of cases. Conclusion: Permanent and fresh frozen sections at reimplantation in two-stage revision do not serve as a reliable predictor for reinfection.

Cemented dual-mobility constructs in uncemented revision acetabular components.

Aims: Dislocation remains a leading cause of failure following revision total hip arthroplasty (THA). While dual-mobility (DM) bearings have been shown to mitigate this risk, options are limited when retaining or implanting an uncemented shell without modular DM options. In these circumstances, a monoblock DM cup, designed for cementing, can be cemented into an uncemented acetabular shell. The goal of this study was to describe the implant survival, complications, and radiological outcomes of this construct. Methods: We identified 64 patients (65 hips) who had a single-design cemented DM cup cemented into an uncemented acetabular shell during revision THA between 2018 and 2020 at our institution. Cups were cemented into either uncemented cups designed for liner cementing (n = 48; 74%) or retained (n = 17; 26%) acetabular components. Median outer head diameter was 42 mm. Mean age was 69 years (SD 11), mean BMI was 32 kg/m2 (SD 8), and 52% (n = 34) were female. Survival was assessed using Kaplan-Meier methods. Mean follow-up was two years (SD 0.97). Results: There were nine cemented DM cup revisions: three for periprosthetic joint infection, three for acetabular aseptic loosening from bone, two for dislocation, and one for a broken cup-cage construct. The two-year survivals free of aseptic DM revision and dislocation were both 92%. There were five postoperative dislocations, all in patients with prior dislocation or abductor deficiency. On radiological review, the DM cup remained well-fixed at the cemented interface in all but one case. Conclusion: While dislocation was not eliminated in this series of complex revision THAs, this technique allowed for maximization of femoral head diameter and optimization of effective acetabular component position during cementing. Of note, there was only one failure at the cemented interface.

Revision total hip arthroplasty using a modular fluted, tapered revision femoral component and interlocking screws in Vancouver B3 periprosthetic fractures with insufficient bone at the isthmus.

Aims: Revision total hip arthroplasty in patients with Vancouver type B3 fractures with Paprosky type IIIA, IIIB, and IV femoral defects are difficult to treat. One option for Paprovsky type IIIB and IV defects involves modular cementless, tapered, revision femoral components in conjunction with distal interlocking screws. The aim of this study was to analyze the rate of reoperations and complications and union of the fracture, subsidence of the stem, mortality, and the clinical outcomes in these patients. Methods: A total of 46 femoral components in patients with Vancouver B3 fractures (23 with Paprosky type IIIA, 19 with type IIIB, and four with type IV defects) in 46 patients were revised with a transfemoral approach using a modular, tapered, cementless revision Revitan curved femoral component with distal cone-in-cone fixation and prospectively followed for a mean of 48.8 months (SD 23.9; 24 to 112). The mean age of the patients was 80.4 years (66 to 100). Additional distal interlocking was also used in 23 fractures in which distal cone-in-cone fixation in the isthmus was < 3 cm. Results: One patient (2.2%) died during the first postoperative year. After six months, 43 patients (93.5%) had osseous, and three had fibrous consolidation of the fracture and the bony flap, 42 (91.3%) had bony ingrowth and four had stable fibrous fixation of the stem. No patient had radiolucency around the interlocking screws and no screw broke. One patient had non-progressive subsidence and two had a dislocation. The mean Harris Hip Score increased from of 57.8 points (SD 7.9) three months postoperatively to 76.1 points (SD 10.7) 24 months postoperatively. Conclusion: The 2° tapered, fluted revision femoral component with distal cone-in-cone-fixation, combined with additional distal interlocking in patients with bony deficiency at the isthmus, led to reproducibly good results in patients with a Vancouver B3 fracture and Paprosky type IIIA, IIIB, and IV defects with regard to union of the fracture, subsidence or loosening of the stem, and clinical outcomes.

Articulating Spacers in Total Hip Arthroplasty: Surgical Technique and Outcomes.

Although one-stage exchange arthroplasty is gaining popularity, two-stage exchange arthroplasty remains the gold standard for the treatment of periprosthetic joint infections. Use of an articulating spacer for this procedure offers an avenue for maintaining hip motion and controlled weight-bearing, allowing local antibiotic elution. However, there is no uniform consensus on the optimal surgical protocol for using articulating spacers. This review describes the surgical technique for undertaking a first-stage exchange arthroplasty using an articulating spacer and discusses the pertinent literature on key concepts relating to periprosthetic joint infections in total hip arthroplasty to guide effective surgical decision making in these patients.