The effect of SiO2 crystallization in enhancing the luminescence of Dy3+-Sm3+ co-doped glass ceramics for cool white light application.

The present work investigates the structural and luminescence behaviour of Dy3+-Sm3+ co-doped glass ceramics obtained through heat treatment of precursor glasses. The growth of SiO2 polycrystalline particles and evolution of these crystallites in the glass domain are witnessed via XRD and FESEM study. The presence of network vibrational bands, hydroxyl groups and the increased quantity of bridging oxygens (BOs) in glass ceramics are analysed through FTIR spectroscopy study. The absorption study (UV-Visible-NIR) showed the possible electronic transitions of Dy3+ and Sm3+ ions. The red shift in the absorption band edges and the lower bandgap values are obtained as a result of improved heat treatment in glass ceramics. Emission studies show the enhanced luminescence intensity of glass ceramics under 350 and 402 nm excitations. Decay measurement of glass ceramics showed the improved lifetimes of Dy3+ and Sm3+ ions to have appeared in microseconds (×10-6 s). The colour characteristics of glass ceramics analysed using CIE colour chromaticity diagram and correlated colour temperature (CCT) values suggest the neutral to cool white light emissions. Therefore, prepared glass ceramics with SiO2 polycrystalline phase are considered to be suitable materials in cool white LEDs applications.

Impact of samarium on magnetic and optoelectronic properties of magnesium-based MgSm2X4 (X = S and Se) spinels for spintronics.

Investigating novel compounds has become necessary due to the need for sophisticated materials in optoelectronic devices and spintronics. Because of their unique properties, magnesium-based spinels MgSm2X4 (X = S and Se) are very promising for these applications. We used the spin-polarized PBEsol for structural properties and the PBEsol functional for mechanical behavior, both using the WIEN2k code. Both compounds' stability in the magnetic and non-magnetic phases was validated by the Birch-Murnaghan equation of state, and their stability in the cubic phase was verified by the Born stability criterion. Their ductile character was shown by the computation of Pugh's ratio and Poisson ratio. Both MgSm2S4 and MgSm2Se4 display metallic behavior in the spin-up channel and semiconducting behavior in the spin-down channel, indicating a half-metallic nature, according to TB-mBJ potential calculations. With total magnetic moments of 20 µB, both materials showed ferromagnetic properties. Samarium ions contributed 5.27 µB for MgSm2S4 and 5.34 µB for MgSm2Se4. Furthermore, we computed optical parameters in the energy range of 0 to 15 eV, such as absorption, extinction coefficient, reflectivity, dielectric function, and refractive index. Our results demonstrate the potential of MgSm2X4 spinels for future technological developments by revealing their prospective optoelectronic and spintronic applications.

Exploring the role of neutral ligands in modulating the photoluminescence of samarium complexes with 1,1,1,5,5,5-hexafluoro-2,4-pentanedione.

Four eight-coordinated luminescent samarium complexes of type [Sm(hfpd)3L2] and [Sm(hfpd)3L'] [where hfpd = 1,1,1,5,5,5-Hexafluoro-2,4-pentanedione L = tri-octyl-phosphine oxide (TOPO) and L' = 1,10-phenanthroline (phen), neocuproine (neoc) and bathocuproine (bathoc) were synthesized via a stoichiometrically controlled approach. This allows for precise control over the stoichiometry of the complexes, leading to reproducible properties. This investigation focuses on understanding the impact of secondary ligands on the luminescent properties of these complexes. Infrared (IR) spectra provided information about the molecular structures, whereas 1H and 13C nuclear magnetic resonance (NMR) spectra confirmed these structural details along with the coordination of ligands to trivalent Sm ion. The UV-vis spectra revealed the molar absorption coefficient and absorption bands associated with the hfpd ligand and photoluminescence (PL) spectroscopy demonstrated intense orange-red emission (648 nm relative to 4G5/2 → 6H9/2) from the complexes. The Commission Internationale de l'Éclairage (CIE) triangles indicated that the complexes emitted warm orange red light with color coordinates (x, y) ranging from (0.62, 0.36) to (0.40, 0.27). The investigation of the band gap as well as color parameters confirms the utility of these complexes in displays and LEDs.

PANI/GO and Sm co-modified Ti/PbO2 dimensionally stable anode for highly efficient amoxicillin degradation: Performance assessment, impact parameters and degradation mechanism.

The abuse and uncontrolled discharge of antibiotics present a severe threat to environment and human health, necessitating the development of efficient and sustainable treatment technology. In this work, we employ a facile one-step electrodeposition method to prepare polyaniline/graphite oxide (PANI/GO) and samarium (Sm) co-modified Ti/PbO2 (Ti/PbO2-PANI/GO-Sm) electrode for the degradation of amoxicillin (AMX). Compared with traditional Ti/PbO2 electrode, Ti/PbO2-PANI/GO-Sm electrode exhibits more excellent oxygen evolution potential (2.63 V) and longer service life (56 h). In degradation experiment, under optimized conditions (50 mg L-1 AMX, 20 mA cm-2, pH 3, 0.050 M Na2SO4, 25 °C), Ti/PbO2-PANI/GO-Sm electrode achieves remarkable removal efficiencies of 88.76% for AMX and 79.92% for chemical oxygen demand at 90 min. In addition, trapping experiment confirms that ·OH plays a major role in the degradation process. Based on theoretical calculation and liquid chromatography-mass spectrometer results, the heterocyclic portion of AMX molecule is more susceptible to ·OH attacks. Thus, this novel electrode offers a sustainable and efficient solution to address environmental challenges posed by antibiotic-contaminated wastewater.

Demystification of luminescence properties and the near imperceptible thermal quenching of Sm3+-doped tungstate phosphors.

Ultra-high thermally stable Ca2MgWO6:xSm3+ (x = 0.5, 0.75, 1, 1.25, and 1.5 mol%) double perovskite phosphors were synthesized through solid-state reaction method. Product formation was confirmed by comparing the X-ray diffraction (XRD) patterns of the phosphors with the standard reference file. The structural, morphological, thermal, and optical properties of the prepared phosphor were examined in detail using XRD, Fourier transform infrared spectra, scanning electron microscopy, diffused reflectance spectra, thermogravimetric analysis (TGA), photoluminescence emission, and temperature-dependent PLE (TDPL). It was seen that the phosphor exhibited emission in the reddish region for the near-ultraviolet excitation with moderate Colour Rendering Index values and high colour purity. The optimized phosphor (x = 1.25 mol%) was found to possess a direct optical band gap of 3.31 eV. TGA studies showed the astonishing thermal stability of the optimized phosphor. Additionally, near-zero thermal quenching was seen in TDPL due to elevated phonon-assisted radiative transition. Furthermore, the anti-Stokes and Stokes emission peaks were found to be sensitive toward the temperature change and followed a Boltzmann-type distribution. All these marked properties will make the prepared phosphors a suitable candidate for multifield applications and a fascinating material for further development.

Assessment of the catalytic and biological potential of yttrium and samarium-modified copper ferrite nanomaterials.

The present study reports the preparation of crystalline and nanosized copper ferrite (CuFe2O4), Y3+ substituted CuFe2O4 (CuFe1.95Y0.05O4), and Sm3+ substituted CuFe2O4 (CuFe1.95Sm0.05O4) using a simple co-precipitation method. The XRD analysis confirmed the formation of the cubic spinel phase, while XPS studies validated the presence of Cu and Fe in 2+ and 3+ oxidation states respectively. Transmission electron microscopy (TEM) analysis revealed the nanoparticles with a diameter in the range of 10-60 nm. The introduction of fractional amounts of Y3+ and Sm3+ ions in the CuFe2O4 lattice enhanced the reduction of 4-nitrophenol, attributed to decreased particle size facilitating the reduction process. In the case of antimicrobial activity, Candida albican was found to be maximally sensitive to CuFe2O4 and CuFe1.95Y0.05O4, while Pseudomonas aeruginosa was inhibited by CuFe1.95Sm0.05O4. Moreover, a maximum of 61.9 ± 1.91 % anti-Pseudomonas biofilm activity and 75.7 ± 1.28 % DPPH radical scavenging activity was observed for CuFe1.95Y0.05O4 at 200 µg/ml concentration. The improvement in biological activities was attributed to the reduced particle size, crystal structure modification, and increased stability of the CuFe2O4 lattice with substitution. The enhancement in catalytic and biological performance highlighted the effectiveness of minimal Y3+ and Sm3+ concentrations in modulating the properties of CuFe2O4 nanomaterials.

Structural, photoluminescence, and optical characteristics of a Sm3+ -doped lead borate-strontium-tungsten glass system: Evaluation of Judd-Ofelt intensity parameters and radiative properties.

In this study, the melt quenching approach is used to synthesize a lead borate-strontium-based glass system doped with samarium ions. Modifications in the glass network structure arising from the addition of various concentrations of Sm3+ ions were investigated via Fourier transform infrared (FTIR) spectroscopy. FTIR analysis revealed B-O-B bridges, BO3 , and BO4 units are present. UV-vis-NIR spectroscopic measurement was performed to study the optical absorption spectra. Optical constants such as optical bandgap energies, refractive indices, and other related parameters were evaluated. The lifetime fluorescence decay was measured and ranged between 1.04 and 1.88 ns. The photoluminescence spectra in the range 500-750 nm revealed four transitions from the ground state 6 G5/2 to the excited states 6 H5/2 , 6 H7/2 , 6 H9/2 and 6 H11/2 and J-O theory was utilized to study these optical transitions for Sm3+ ions. Calculations of the oscillator strengths and J-O intensity parameters were performed and the obtained J-O parameters followed the sequence Ω4 > Ω6 > Ω2 . The ratio O/R indicated a high lattice asymmetry around the samarium ions. The values of lifetimes and branching ratios for the fabricated samples emphasized their suitability to be used in laser applications. The current glass samples are good candidates for orange and red emission devices.

Development of samarium-doped phosphate glass microspheres for internal radiotheranostic applications.

Internal radiotherapy delivers radioactive sources inside the body, near to or into malignant tumours, which may be particularly effective when malignancies are not responding to external beam radiotherapy. A pure beta emitter, 90Y, is currently used for internal radiotherapy. However, theranostic radionuclide-doped microspheres can be developed by incorporating 153Sm, which emits therapeutic beta and diagnostic gamma energies. This study investigated the production of high concentrations of samarium-content doped phosphate-based glass microspheres. The glass P60 (i.e. 60P2O5-25CaO-15Na2O) was mixed with Sm2O3 at ratios of 75:25 (G75:Sm25), 50:50 (G50:Sm50) and 25:75 (G25:Sm75) and processed via flame spheroidisation. Scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) confirmed the microsphere uniformity with significantly high samarium content up to 44 % in G25:Sm75. Via X-ray diffraction (XRD) analysis, samarium-doped microspheres appeared to be glass-ceramic in nature. Mass-loss, size and pH changes were performed over 28 days, revealing a significant increase in samarium microsphere stability. After 15 min of neutron activation (neutron flux 3.01 × 1013 n.cm-2.s-1), the specific activity of the microspheres (G75:Sm25, G50:Sm50 and G25:Sm75) was 0.28, 0.54 and 0.58 GBq.g-1, respectively. Therefore, the samarium microspheres produced in this study provide great potential for improving internal radiotherapy treatment for liver cancer by avoiding complex procedures and using less microspheres with shorter irradiation time.

Efficient Photocatalytic degradation of direct blue 15 dye using samarium doped bismuth tungstate nanosheets: A sustainable approach towards wastewater treatment.

The rare earth metal, samarium (Sm3+) doped bismuth tungstate (Bi2WO6) nanoparticles were prepared by a one-pot hydrothermal method. The powder X-ray diffraction (XRD) analysis confirmed the formation of Bi2WO6 with an orthorhombic crystal structure. The crystallite size of Bi2WO6 decreased from 20.73 to 9.25 nm as the Sm substitution in the W lattice increased. The vibrational modes of W-O, Bi-O, and Sm-O were identified in the range of 500-900 cm-1. The optical bandgap of Sm3+ doped Bi2WO6 nanoparticles increased from 2.86 to 2.95 eV with higher Sm doping levels. The surface morphology revealed the formation of flower-like sheets in the Sm3+ doped bismuth tungstate. The energy dispersive X-ray (EDX) spectrum of Sm3+ doped Bi2WO6 nanoparticles confirmed the presence of Sm, Bi, W, and O without any other impurities. The small peak detected at 1082.14 eV in the survey scan of Sm3+ doped Bi2WO6 nanoparticles belonged to Sm3d. In the photocatalytic degradation of direct blue 15 (DB15) under visible light irradiation, the efficiency of the nanoparticles increased with higher Sm3+ concentration. The obtained results demonstrated that the Sm-Bi2WO6 nanosheets could provide an effective and sustainable solution for treating the wastewater containing direct blue 15 dye.

Highly selective and discriminative detection of small alcohols based on a dual-emission macrocyclic samarium complex.

Lower alcohols (C1-C7) have a close relationship with our lives and some of them are harmful to our body's health. For example, liquor mixed with a tiny amount of methanol is harmful to our health. Much of this study is about identifying one or two low-level alcohols. How to detect low-level alcohol and high-throughput and distinguish between analogues of alcohol remains a tremendous challenge. In this study, a new large ring Schiff base Sm(III) complex (Sm-2r) is synthesized with a double emission matrix using the template method. Its dynamic imine bond (CN) and organic ligands (H2L2r) with molecular rotor properties can respond to changes in viscosity and polarity in external environments. The PCA method is used to turn the data matrix into a fingerprint spectrum to distinguish different alcohols (C1-C7). Sm-2r enables the quantization of cyclopropyl and glycerol. Linear ranges of cyclopropanol and glycerol are 0-9.0% and 0-3.0% (v/v), respectively. In addition, Sm-2r has an excellent ability to distinguish the mixtures of n-PrOH and i-PrOH, C5H9OH and C6H11OH, n-PeOH and n-HeOH, 1,3-PDO and 1,2-PDO, MeOH and EtOH, 1,2-EG and 1,2-PDO at different volume ratios. We have provided a way to distinguish alcohol species based on their molecular polarity and viscosity.

Samarium-Based Turn-Off Fluorescence Sensor for Sensitive and Selective Detection of Quinolinic Acid in Human Urine and Serum.

Quinolinic acid (QA) is an index for some diseases, whose detection is of importance. This work presents a samarium metal-organic framework (Sm-MOF) containing 5-sulfoisophthalate ligand (SIP3-). The fluorescence of Sm-MOF integrates the emission at 339 nm from the SIP3- ligand and four characteristic 4G5/2 → 4Hj (j = 5/2, 7/2, 9/2, and 11/2) transitions at 559, 596, 642, and 701 nm from Sm(III). Sm-MOF as a turn-off fluorescence sensor to QA exhibits high sensitivity, selectivity, and durability. The fluorescence quenching response to QA shows a linear relationship of I0/I = 0.00496·CQA + 1.12474 in the QA concentration of 0-500 µM and a limit of detection calculated as 4.11 µM. Sm-MOF shows the structural and fluorescent stabilities in five quenching-recovery cycles. The recoveries of close to 100% in human urine and serum indicate high reliability. The paper-based Sm-MOF sensor displays a rough QA quantitative analysis by recognizing red values in the on-site QA detection.

Samarium Diiodide Acting on Acetone-Modeling Single Electron Transfer Energetics in Solution.

Samarium diiodide is a versatile single electron transfer (SET) agent with various applications in organic chemistry. Lewis structures regularly insinuate the existence of a ketyl radical when samarium diiodide binds a carbonyl group. The study presented here investigates this electron transfer by the means of computational chemistry. All electron CASPT2 calculations with the inclusion of scalar relativistic effects predict an endotherm electron transfer from samarium diiodide to acetone. Energies calculated with the PBE0-D3(BJ) functional and a small core pseudopotential are in good agreement with CASPT2. The calculations confirm the experimentally measured increase of the samarium diiodide reduction potential through the addition of hexamethylphosphoramide also known as HMPA.

Modulating chitin synthesis in marine algae with iminosugars obtained by SmI2 and FeCl3-mediated diastereoselective carbonyl ene reaction.

Strategies for synthesizing polyhydroxylated piperidines such as iminosugars have received broad attention. These substances are known to interact with carbohydrate related enzymes, glycosidases and glycosyltransferases, to which also the large enzyme families of chitin synthases and cellulose synthases belong. Many chemical and biological aspects of chitin synthases remain unexplored due to the fact that modulating substances are hardly available or expensive. Starting from enantiopure D- and L-amino acids, a series of iminosugars was prepared by a Lewis acid-catalyzed cyclization of amino acid-derived unsaturated aldehydes as key step. Therefore, different Lewis acids were tested. For samarium diiodide we observed a superior stereoselectivity in comparison to iron(III) chloride and methylaluminium dichloride. To increase water solubility for testing and measurement of enzyme activity, the cyclization products were further functionalized. We established a novel biological chitin synthesis test system which allows quantitative investigation of chitin synthesis in the chitin fiber producing diatom algae Thalassiosira in vivo under the light microscope. None of the compounds displayed cytotoxicity, but two of the four iminosugars increased the length of the chitin fibers produced. This is a strong indicator that these compounds mimic carbohydrates responsible for restarting chitin polymerization.

Diastereoselective Radical 1,4-Ester Migration: Radical Cyclizations of Acyclic Esters with SmI2.

Reductive cyclizations of carbonyl compounds, mediated by samarium(II) diiodide (SmI2, Kagan's reagent), represent an invaluable platform to generate molecular complexity in a stereocontrolled manner. In addition to classical ketone and aldehyde substrates, recent advances in radical chemistry allow the cyclization of lactone and lactam-type substrates using SmI2. In contrast, acyclic esters are considered to be unreactive to SmI2 and their participation in reductive cyclizations is unprecedented. Here, we report a diastereoselective radical 1,4-ester migration process, mediated by SmI2, that delivers stereodefined alkene hydrocarboxylation products via radical cyclization of acyclic ester groups in α-carbomethoxy δ-lactones. Isotopic labeling experiments and computational studies have been used to probe the mechanism of the migration. We propose that a switch in conformation redirects single electron transfer from SmI2 to the acyclic ester group, rather than the "more reactive" lactone carbonyl. Our study paves the way for the use of elusive ketyl radicals, derived from acyclic esters, in SmI2-mediated reductive cyclizations.

Production cross sections of samarium-153 and -145 via alpha-particle-induced reactions on natural neodymium.

Production cross sections of 153,145Sm via alpha-particle-induced reactions on natNd were measured up to 23 MeV. The stacked-foil activation technique and high-resolution gamma-ray spectrometry were adopted for the measurement. The obtained cross sections were compared with the literature data and the TENDL-2019 and TENDL-2021 values. Physical thick target yields of the two radionuclides were derived from the measured cross sections.

Narrow-Band Red-Emitting Phosphors with High Color Purity, Trifling Thermal and Concentration Quenching for Hybrid White LEDs and Li3Y3BaSr(MoO4)8:Sm3+, Eu3+-Based Deep-Red LEDs for Plant Growth Applications.

Trivalent europium-based monochromatic red light-emitting phosphors are an essential component to realize high-performance smart lighting devices; however, the concentration and thermal quenching restrict their usage. Here, we report a series of efficient Eu3+-substituted Li3Y3BaSr(MoO4)8 red-emitting phosphors based on a stratified scheelite structure with negligible concentration and thermal quenching. All of the host and phosphor compositions crystallize in monoclinic crystal structure (space group C2/c). All of the phosphor compositions produce narrow-band red emission (FWHM ∼6 nm), which is highly apparent to the human eyes, and lead to exceptional chromatic saturation of the red spectral window. Concurrently, detailed investigations were carried out to comprehend the concentration and thermal quenching mechanism. Absolute quantum yields as high as 88.5% were obtained for Li3Y0.3Eu2.7BaSr(MoO4)8 phosphor with virtuous thermal stability (at 400 K, retaining 87% of its emission intensity). The light-emitting diodes were constructed by coupling Li3BaSrY0.3Eu2.7(MoO4)8 red phosphor with a near-UV LED chip (395 nm) operated at 20 mA forward bias, and the hybrid white LED (an organic yellow dye + red Li3Y3BaSr(MoO4)8:Eu3+ phosphor integrated with an NUV LED chip) showed a low CCT (6645 K), high CRI (83) values, and CIE values of x = 0.303; y = 0.368, which indicated that the synthesized phosphors can be a suitable red component for white LEDs. In addition, we have systematically investigated the Sm3+ and Sm3+, Eu3+ activation in Li3Y3BaSr(MoO4)8 to display the latent use of the system in plant growth applications and establish that the phosphor exhibits orange red emission with an intense deep-red emission (645 nm (4G5/2 → 6H9/2)). The phytochrome (Pr) absorption spectrum well matched the fabricated deep-red LED (by integrating a NUV LED + Li3Y3BaSr(MoO4)8:Sm3+ and Eu3+ phosphor) spectral lines.

Applicability of Reddish-Orange Light Emitting Samarium (III) Complexes for Biomedical and Multifunctional Optoelectronic Devices.

Six crimson samarium (III) complexes based on ß-ketone carboxylic acid and ancillary ligands were synthesized by adopting the grinding technique. All synthesized complexes were investigated via elemental analysis, infrared, UV-Vis, NMR, TG/DTG and photoluminescence studies. Optical properties of these photostimulated samarium (III) complexes exhibit reddish-orange luminescence due to 4G5/2 → 6H7/2 electronic transition at 606 nm of samarium (III) ions. Further, energy bandgap, color purity, CIE color coordinates, CCT and quantum yield of all complexes were determined accurately. Replacement of water molecules by ancillary ligands enriched these complexes (S2-S6) with decay time, quantum yield, luminescence, energy bandgap and biological properties than parent complex (S1). Interestingly, these efficient properties of complexes may find their applications in optoelectronics and lighting systems. In addition to these, the antioxidant and antimicrobial assays were also investigated to explore the applications in biological assays.

In situ Polymerization of Polyaniline/Samarium Oxide - Anatase Titanium Dioxide (PANI/Sm2O3-TiO2) Nanocomposite: Structure, Thermal and Dielectric Constant Supercapacitor Application Study.

Pure and varying weigh ratio of Sm2O3-TiO2 modified polyaniline nanocomposite has been successfully synthesized using in situ polymerization of aniline solution with Sm2O3-TiO2 binary oxide. The nanocomposite have been characterized by X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), X-photoelectron microscopy (XPS), Field emission-scanning electron microscope (FE-SEM), transmission electron microscopy (TEM) thermogravimetric analysis (TGA) and LCR meter. The XRD results show synthesis anatase TiO2 phase with tetragonal structure and (monoclinic and cubic) mixture structure of Sm2O3. The FE-SEM and TEM measurements appear preparing spherical nanoparticles that covered fiber morphology of polyaniline and successfully in situ polymerization process. The TGA measurements are obtain high thermal stability for polyaniline after incorporation by Sm2O3-TiO2 binary oxide nanoparticles. LCR measurement is obtained that the DC conductivity, dielectric constant and dielectric loss of nanocomposite is larger than pure polyaniline and the electric properties increase with increasing the concentration of nanoparticles.

A Stereoselective Synthesis of Fused Carbocycles with a cis-1,2-Diol Moiety by Desymmetrization: SmI2-Mediated Pinacol Coupling of meso-Cyclic 1,3-Diones.

Samarium diiodide (SmI2)-mediated desymmetrization of a meso-cyclic 1,3-dione pinacol coupling is described. The reaction proceeds with high stereoselectivity to provide fused carbocyclic compounds with three contiguous stereogenic centers featuring an all-carbon quaternary center and a cis-1,2-diol moiety.

Luminescence and photoionization of X-ray generated Sm2+ in coprecipitated CaF2 nanocrystals.

We report photoluminescence and photoionization properties of Sm2+ ions generated by X-irradiation of nanocrystalline CaF2:Sm3+ prepared by coprecipitation. The nanocrystals were of 46 nm average crystallite size with a distribution of ±20 nm and they were characterised by XRD, TEM and SEM-EDS. At room temperature, the X-irradiated sample displayed broad electric dipole allowed Sm2+ 4f55d (A1u) → 4f6 7F1 (T1g) luminescence at 725 nm that narrowed to an intense peak at 708 nm on cooling to ∼30 K. The narrow f-f transitions of Sm3+ were also observed. The X-irradiation-induced reduction of Sm3+ + e- → Sm2+ as a function of X-ray dose was investigated over a very wide dynamic range from 0.01 mGy to 850 Gy by monitoring the photoluminescence intensities of both Sm2+ and Sm3+ ions. The reverse Sm2+ → Sm3+ + e- photoionization can be modelled by employing dispersive first-order kinetics and using a standard gamma distribution function, yielding an average separation of 13 Å between the Sm2+ ions and the hole traps (e.g. oxide ion impurities). The present results point towards potential applications of Sm doped CaF2 nanocrystals in the fields of dosimetry and X-ray imaging.