Decreasing Greenhouse Gas Emissions from the Municipal Solid Waste Sector in Chinese Cites.

Municipal solid waste (MSW) management systems play a crucial role in greenhouse gas (GHG) emissions in China. Although the government has implemented many policies to improve the MSW management system, the impact of these improvements on city-level GHG emission reduction remains largely unexplored. This study conducted a comprehensive analysis of both direct and downstream GHG emissions from the MSW sector, encompassing sanitary landfill, dump, incineration, and biological treatment, across 352 Chinese cities from 2001 to 2021 by adopting inventory methods recommended by the Intergovernmental Panel on Climate Change (IPCC). The results reveal that (1) GHG emissions from the MSW sector in China peaked at 70.6 Tg of CO2 equiv in 2018, followed by a significant decline to 47.6 Tg of CO2 equiv in 2021, (2) cities with the highest GHG emission reduction benefits in the MSW sector were historical emission hotspots over the past 2 decades, and (3) with the potential achievement of zero-landfilling policy by 2030, an additional reduction of 203.7 Tg of CO2 equiv is projected, with the emission reduction focus toward cities in South China (21.9%), Northeast China (17.8%), and Southwest China (17.3%). This study highlights that, even without explicit emission reduction targets for the MSW sector, the improvements of this sector have significantly reduced GHG emissions in China.

Mini-Open Dumps in the Paraná River Floodplain: Local Problems with Global Effects.

The growing production of urban solid waste is a structural problem faced by most cities around the world. The proliferation of mini-open dumps (MOD; small spontaneous open-air waste dumps formed in urban and peri-urban areas) on the banks of the Paraná River is particularly evident. During the historical drought (June-December 2021), we carried out sampling campaigns identifying MODs of the Santa Fe River, a secondary channel of the Paraná River. MOD were geolocated, measured, described and classified by origin. The distance to the river and other sensitive places was considered (houses-schools-health facilities). Our results suggested a serious environmental issue associated with poor waste management. MOD were extremely abundant in the study area, being mostly composed of domestic litter. Plastics clearly dominated the MOD composition. Burning was frequently observed as a method to reduce the volume of MOD. We concluded that the proliferation of MOD is a multi-causal problem associated with a failure of public policies and a lack of environmental education.

Strontium leaching from municipal waste subjected to incineration.

The aim of the study was to determine the content and leachability of Sr in ashes obtained through combusting municipal waste in household furnaces. The waste had been collected as a mixed stream and as separate fractions (i.e. furniture, sponges, waste paper, PCV packaging, plastic-coated paper cartons, imitation leather, rubber, textiles and polystyrene). Using single-step chemical extractions, (HCl + HNO3, H2O, 0.01 M CaCl2, 0.1 M CH3COOH), we determined the total content of Sr (TC) and proportions of the following fractions: water-leachable, phytoavailable and easily soluble and bound to carbonates. We also analyzed the effect of reducing pH in the extraction solutions on St leachability from the study material. The study showed that Sr concentration in ash generated from the combustion of conventional fuels, alternative fuels and municipal waste ranged from 114 to 1006 mg/kg. The largest amounts of Sr were found in ash generated from the combustion of alternative fuels (coal pellets 488-1006 mg/kg), conventional fuels (hard coal 430-670 mg/kg) and mixed waste (237-825 mg/kg). The most mobile fraction of Sr (water-leachable) comprised from 1.3% to nearly 91% TC; the phytoavailable fraction and the ion-exchange and carbonate-bound fraction comprised 3-92% TC and 9-72% TC, respectively. We also found that the greatest pH reductions do not always entail the greatest amounts of extracted Sr. A much more significant factor in this respect is the mineral and chemical composition of primary materials, which can buffer changes in pH. The Risk Assessment Code (RAC) values pointed to a varied environmental risk and the highest RAC values (> 70) were found for coal pellets, wood pellets, straw, rubber and plastic containers for mixed oils.

New insight into the spatio-temporal patterns of functional groups of hotspot inside the composting aggregates by synchrotron-based FTIR in hyperthermophilic composting.

Hyperthermophilic composting (HTC) is a recently developed and highly promising organic fraction of municipal solid waste (OFMSW) treatment technology. Investigation of organic matter (OM) dynamics in compost particle is thus crucial for the understanding of humification of HTC process. Herein, this work aimed to study the chemical and structural changes of OM at the molecular level during HTC of OFMSW using EEM and SR-FTIR analyses. Additionally, two-dimensional correlation spectroscopy (2D-COS) was also utilized to probe and identify the changes in chemical constituents and functional groups of organic compounds on the surface of compost particles during different composting periods. Results show that SR-FTIR can detect fine-scale (~µm) changes in functional groups from the edges to the interior of compost particles during different composting periods by mapping the particles in situ. In the hyperthermophilic stage (day 9), the extracted µ-FTIR spectrum reveals a distinct boundary between anaerobic and aerobic regions within the compost particle, with a thickness of anaerobic zone (1460 cm-1) of approximately 30 µm inside the particle's core. This provides direct evidence of anaerobic trends at compost microscales level within compost particles. 2D-COS analysis indicated that organic functional groups gradually agglomerated in the order of 1330 > 2930 > 3320 > 1600 > 1030 > 895 cm-1 to the core skeleton of cellulose degradation residues, forming compost aggregates with well physicochemical properties. Overall, the first combination of SR-FTIR and EEM provides complementary explanations for the humification mechanism of HTC, potentially introducing a novel methodology for investigating the environmental behaviors and fates of various organic contaminants associated with OM during the in-situ composting biochemical process.

The effects of impurities in carbide slag on the morphological evolution of CaCO3 during carbonation.

Carbide slag (CS) is a kind of solid waste generated by the hydrolysis of calcium carbide for acetylene production. Its major component is Ca(OH)2, which shows great potential in CO2 mineralization to produce CaCO3. However, the types of impurities in CS and their mechanisms for inducing the morphological evolution of CaCO3 are still unclear. In this work, the influence of impurities in CS on the morphology evolution of CaCO3 was investigated. The following impurities were identified in the CS: Al2O3, MgO, Fe2O3, SiO2 and CaCO3. Ca(OH)2 was used to study the influence of impurities (Al2O3 and Fe2O3) on the evolution of CaCO3 morphology during CS carbonation. Calcite (CaCO3) was the carbonation product produced during CS carbonation under varying conditions. The morphology of calcite was changed from cubic to rod-shaped, with increasing solid-liquid ratios. Moreover, rod-shaped calcite was converted into irregular particles with increasing CO2 flow rate and stirring speed. Rod-shaped calcite (CaCO3) was formed by CS carbonation at a solid-liquid ratio of 10:100 under a stirring speed of 600 rpm and a CO2 flow rate of 200 ml/min; and spherical calcite was generated during Ca(OH)2 carbonation under the same conditions. Al2O3 impurities had negligible effects on spherical CaCO3 during Ca(OH)2 carbonation. In contrast, rod-shaped CaCO3 was generated by adding 0.13 wt% Fe2O3 particles, similar to the content of Fe2O3 in CS. Rod-shaped calcite was converted into particulate calcite with increasing Fe2O3 content. The surface wettability and surface negative charge of Fe2O3 appeared to be responsible for the formation of rod-shaped CaCO3. This study enhances our understanding and utilization of CS and CO2 reduction and the fabrication of high-value rod-shaped CaCO3.

Enhanced thermophilic high-solids anaerobic digestion of organic fraction of municipal solid waste with spatial separation from conductive materials in a single reactor volume.

Despite benefits such as lower water and working volume requirements, thermophilic high solids anaerobic digestion (THSAD) often fails due to the rapid build-up of volatile fatty acids (VFAs) and the associated drop in pH. Use of conductive materials (CM) can promote THSAD through stimulation of direct interspecies electron transfer (DIET), while the need for their constant dosing due to poor separation from effluent impairs economic feasibility. This study used an approach of spatially separating magnetite and granular activated carbon (GAC) from the organic fraction of municipal solid waste (OFMSW) in a single reactor for THSAD. GAC and magnetite addition could both mitigate the severe inhibition of methanogenesis after VFAs build-up to ∼28-30 g/L, while negligible methane production was observed in the control group. The highest methane yield (286 mL CH4/g volatile solids (VS)) was achieved in magnetite-added reactors, while the highest maximum CH4 production rates (26.38 mL CH4/g VS/d) and lowest lag-phase (2.83 days) were obtained in GAC-added reactors. The enrichment of GAC and magnetite biofilms with various syntrophic and potentially electroactive microbial groups (Ruminiclostridium 1, Clostridia MBA03, Defluviitoga, Lentimicrobiaceae) in different relative abundances indicates the existence of specific preferences of these groups for the nature of CM. According to predicted basic metabolic functions, CM can enhance cellular processes and signals, lipid transport and metabolism, and methane metabolism, resulting in improved methane production. Rearrangement of metabolic pathways, formation of pili-like structures, enrichment of biofilms with electroactive groups and a significant improvement in THSAD performance was attributed to the enhancement of the DIET pathway. Promising results obtained in this work due to the spatial separation of the bulk OFMSW and CM can be useful for modeling larger-scale THSAD systems with better recovery of CM and cost-effectiveness.

Something to Chew on; Plate-Waste at an Ontario Veteran's Centre.

There is paucity of data assessing levels of food/beverage waste in long-term care (LTC) facilities, especially in Ontario. Observations in the Veteran's Centre (VC) at Sunnybrook Health Sciences Centre (Sunnybrook) indicated food/beverage waste may be high, potentially impacting sustainability efforts within our institution. Before proceeding with waste reduction efforts, we conducted a comprehensive 3-day waste-audit of food/beverage items provided to VC residents with the goal of understanding the extent of food/beverage waste at VC, items wasted, and any other factors that may inform future changes. Our results indicate that 28% of items served to residents were wasted. Lunch was the meal with greatest waste at 31% and waste of solid items was 12% higher than that of liquids. We observed a large variability in waste between residents and within each resident, with 15% of residents wasting >50% of items provided. This study provides a deeper insight into the magnitude of food/beverage waste in a LTC population and highlights the importance of considering individualized strategies to address waste to avoid negative impact on residents.

Quantification and polymeric characterization of microplastics in composts and their accumulation in lettuce.

Organic fertilizers have become a vector for the transport of microplastics (MPs), which pose human health concerns through the food chain. This study aimed to quantify and characterize MPs in eight different compost samples of various raw materials and their subsequent translocation to lettuce (Lacuta sativa) grown on contaminated composts. The results revealed that the MP abundance ranged from 3810 to 16530 MP/kg. Municipal solid waste compost (MSWC) had highest abundance (16082 ± 632 MP/kg), followed by leaf compost (LC) and organic compost (OC) (6299 ± 1011 and 3680 ± 419 MP/kg, respectively). MPs of <100 µm in size were most dominant in MSWC and LC. Fragments and fibers were the prevalent shape types, with white/transparent colored MPs being more abundant. Polyethylene (PE), polypropylene (PP) and polyethylene terephthalate (PET) were the dominant polymers. MPs accumulation in the lettuce leaves was greatest in the lettuce plants grown on MSWC, followed by those grown on LC and OC, indicating that MSWC grown lettuce is not suitable for human consumption. The decrease in the growth (leaf length, number of leaves, leaf fresh and weights) and physiological (membrane stability index, relative water contents) parameters of lettuce was in line with the trend of MP accumulations. Hence, it is highly important to regulate the plastic contents in compost because it is a threat to ecosystems and human health.

[Effects of Fly Ash on the Efficiency and Bacterial Community Structure of Urban Multi-source Organic Solid Waste].

To achieve efficient resource utilization of fly ash and multi-source organic waste, a composting experiment was carried out to investigate the effects of fly ash on co-aerobic composting using kitchens, chicken manure, and sawdust (15:5:2). The effects of different application doses (5 % and 10 %, calculated in total wet weight of organic solid waste) of fly ash on physical and chemical properties, nutrient elements, and bacterial community structure during co-composting were evaluated. The results showed that the addition dose of 5 % and 10 % fly ash significantly increased the highest temperature (56.6 ℃ and 56.9 ℃) and extended the thermophilic period to nine days. Compared with that in the control, the total nutrient content of compost products in the treatments of 5 % FA and 10 % FA was increased by 4.09 % and 13.55 %, respectively. The bacterial community structure changed greatly throughout the composting, and the bacterial diversity of all treatments increased obviously. In the initial stage of composting, Proteobacteria was the dominant phylum of bacteria, with a relative abundance ranging from 35.26 % to 39.40 %. In the thermophilic period, Firmicutes dominated; its relative abundance peaked at 52.46 % in the 5 % FA treatment and 67.72 % in the 10 % FA treatment. Bacillus and Thermobifida were the predominant groups in the thermophilic period of composting. The relative abundance of Bacillus and Thermobifida in the 5 % FA and 10 % FA treatments were 33.41 % and 62.89 %(Bacillus) and 33.06 % and 12.23 %(Thermobifida), respectively. The results of the redundancy analysis (RDA) revealed that different physicochemical indicators had varying degrees of influence on bacteria, with organic matter, pH, available phosphorus, and available potassium being the main environmental factors influencing bacterial community structure. In summary, the addition of fly ash promoted the harmlessness and maturation of co- aerobic composting of urban multi-source organic waste, while optimizing microbial community structure and improving the quality and efficiency of composting.

Evolution of physicochemical and leaching characteristics of municipal solid waste incineration fly ash in China under ultra-low emission standard.

The physical and chemical characteristics of fly ash has changed significantly under ultra-low emission system and the current leaching system is no longer suitable for high alkalinity fly ash. This work investigated the pH values and evolution of physical and chemical characteristics of fly ash from 24 typical municipal solid waste incineration plants in China. The pH value of the leaching solution obtained by HJ/T 300-2007 presented two different acid and alkali characteristics, where high and low alkalinity fly ash accounted for 54.17% and 45.83%, respectively. The alkali content in fly ash increased significantly after ultra-low emission standard, increasing by 18.24% compared with before the implementation of GB 18485-2014. The leaching behavior of high alkalinity fly ash showed the illusion that they could enter the landfill only by the addition of a small amount of chelating agent or even without stabilization treatment, and its long-term landfill risk is significant. The phase change of high alkalinity fly ash and pH value change of the leaching solution after carbonation were the key factors for the leaching concentration change of heavy metals. Therefore, it is recommended to improve the existing leaching system or conduct accelerated carbonization experiments to scientifically evaluate the long-term leaching characteristics of high alkalinity fly ash, and to reduce the risk of heavy metal release from high alkalinity FA after entering the landfill site.

Dynamic changes in dissolved organic matter during transport of landfill leachate in porous medium.

The dynamic changes in dissolved organic matter (DOM) during the transport of landfill leachate (LL) in porous medium should be explored, considering the high levels of DOM in the LL of municipal solid waste. Column experiments were carried out at 25 °C at a Darcy's flux of 0.29 cm/h for 2722 h to compare the transport of Cl-, ultraviolet absorbance at 254 nm (UV254), chemical oxygen demand (COD), and dissolved organic carbon (DOC) in the simulated porous medium by using the CXTFIT2.1 code. Results showed that the convection-dispersion equation (CDE) could describe Cl- transport well. The high levels of λ and D could be highly correlated with the physicochemical properties of the porous medium. The transport of the studied DOM with evident aromatic character could be described appropriately by the CDE model with the first-order reaction assumption, considering the similar variation trends of UV254, COD, and DOC in the effluent during experiments. Specifically, the values of retardation factor (R) were in the following order: DOC > UV254 > COD, whereas the low values of the first-order decay coefficient (k1) for DOC and COD were still higher than that for UV254. High contents of humic-like substances in the DOM with complex toxic components resulted in the natural low removal efficiencies of COD, DOC, and UV254 (≤ 23%), which could be confirmed by the variations of fluorescence index (FI) and humification index (HIX) in the effluent. The results should be helpful in evaluating the environmental risk induced by the LL leakage in a landfill site.

Potential of metallurgical iron-containing solid waste-based catalysts as activator of persulfate for organic pollutants degradation.

The production of solid wastes in the metallurgical industry has significant implications for land resources and environmental pollution. To address this issue, it is crucial to explore the potential of recycling these solid wastes to reduce land occupation while protecting the environment and promoting resource utilization. Steel slag, red mud, copper slag and steel picking waste liquor are examples of solid wastes generated during the metallurgical process that possess high iron content and Fe species, making them excellent catalysts for persulfate-based advanced oxidation processes (PS-AOPs). This review elucidates the catalytic mechanisms and pathways of Fe2+ and Fe0 in the activation PS. Additionally, it underscores the potential of metallurgical iron-containing solid waste (MISW) as a catalyst for PS activation, offering a viable strategy for its high-value utilization. Lastly, the article provides an outlook towards future challenges and prospects for MISW in PS activation for the degradation of organic pollutants.

Combustion characteristics and gasification kinetics of Brazilian municipal solid waste subjected to different atmospheres by thermogravimetric analysis.

This study examines the gasification kinetics of Brazilian municipal solid waste (MSW) and its components under air, CO2, and air/CO2 (70/30 vol%) atmospheres. The ignition indices of paper and plastic are 6 and 3 times that of food waste, which are 38.6 × 10-3 %/min3 and 19.6 × 10-3 %/min3, respectively, implying a faster separation of volatile compounds from the paper and plastic. The minimum Eα values of 132 kJ/mol and 140 kJ/mol have been obtained for paper waste under air and air/CO2, respectively. On CO2 condition, MSW has an average Ea value of 96 kJ/mol. Under an air/CO2 atmosphere, a high synergistic ΔW of -4.7 wt% has been identified between individual components. The presence of air and CO2 improves the oxidation and char gasification process, thus resulting in better combustion. Hence, the gasification of MSW under an air/CO2 atmosphere would improve the waste-to-energy plant's performance and minimize the CO2 emission.

Not only in the crowd: Benthic litter characterization in a low population density area still reveals widespread pollution and local malpractices.

Various anthropogenic activities affect marine coastal habitats, leading to heavy litter pollution. However, whilst high litter concentrations are nowadays common in the proximity of metropolises, few studies investigated the magnitude of this phenomenon around coastal villages and small towns. We hereby characterized the benthic litter occurring in the trawlable grounds of the Gulf of Policastro (Tyrrhenian Sea, central-western Mediterranean), a low population density area that becomes a popular tourist destination during summer. We furthermore tested differences between two depths (∼100-200 and ∼500-600 m) and the impact of tourism on the shallower waters. The area was characterized by a litter abundance of 651.12 ± 130.61 item/km2, with plastic being almost totalitarian (93%). The shallower waters hosted two-thirds of the litter found. Almost all (∼95%) the litter items had a land-based origin, while the sea-based litter was mostly found at higher depths. About 14% of the litter was found to be fouled, with the development of litter-associated communities that somehow mimic the natural ones living on hard substrates. The higher litter presence noticed during the touristic peak (July-August) suggests that tourism is an important source of local litter, although it contributed to the local accumulation in a synergic way with other factors. The majority of the litter items presumably originated from the nearby coastline, while the deeper waters were or are used as a dumping site by the local trawling fleet. The discovery of such a critical waste accumulation and management in a somehow remote area contributes to widen the perspectives on the presence of benthic litter mostly in territories characterized by wide anthropization. Moreover, it confirms that appropriate local policies and communication plans are urged even at a regional level to stimulate citizen consciousness and mitigate the ever growing litter pollution.

High-efficient stabilization and solidification of municipal solid waste incineration fly ash by synergy of alkali treatment and supersulfated cement.

Municipal solid waste incineration fly ash (IFA) designated as hazardous waste poses risks to environment and human health. This study introduces a novel approach for the stabilization and solidification (S/S) of IFA: a combined approach involving alkali treatment and immobilization in low-carbon supersulfated cement (SSC). The impact of varying temperatures of alkali solution on the chemical and mineralogical compositions, as well as the pozzolanic reactivity of IFA, and the removal efficiency of heavy metals and metallic aluminum (Al) were examined. The physical characteristics, hydration kinetics and effectiveness of SSC in immobilizing IFA were also analyzed. Results showed that alkali treatment at 25 °C effectively eliminated heavy metals like manganese (Mn), barium (Ba), nickel (Ni), and chromium (Cr) to safe levels and totally removed the metallic Al, while enhancing the pozzolanic reactivity of IFA. By incorporating the alkali-treated IFA and filtrate, the density, compressive strength and hydration reaction of SSC were improved, resulting in higher hydration degree, finer pore structure, and denser microstructure compared to untreated IFA. The rich presence of calcium-aluminosilicate-hydrate (C-(A)-S-H) and ettringite (AFt) in SSC facilitated the efficient stabilization and solidification of heavy metals, leading to a significant decrease in their leaching potential. The use of SSC for treating Ca(OH)2- and 25°C-treated IFA could achieve high strength and high-efficient immobilization.

Biohydrogen production by lactate-driven dark fermentation of real organic wastes derived from solid waste treatment plants.

This study evaluated the hydrogen production potential through lactate-driven dark fermentation (LD-DF) of organic wastes from solid waste treatment plants, including the organic fraction of municipal solid waste (OFMSW), mixed sewage sludge, and two OFMSW leachates. In initial batch fermentations, only OFMSW supported a significant hydrogen yield (70.1 ± 7.7 NmL-H2/g-VS added) among the tested feedstocks. Lactate acted as an important hydrogen precursor, requiring the presence of carbohydrates for sequential two-step lactate-type fermentation. The impact of operational pH (5.5-6.5) and initial total solids (TS) concentration (5-12.5 % w/w) was also evaluated using OFMSW as substrate, obtaining hydrogen yields ranging from 6.6 to 55.9 NmL-H2/g-VSadded. The highest yield occurred at 6.5 pH and 7.5 % TS. The LD-DF pathway was indicated to be present under diverse pH and TS conditions, supported by employing a specialized microbial consortium capable of performing LD-DF, along with the observed changes in lactate levels during fermentation.

Synergistic utilization, critical mechanisms, and environmental suitability of bauxite residue (red mud) based multi-solid wastes cementitious materials and special concrete.

The energy consumption and carbon emissions in the construction field, coupled with the accumulation of various industrial solid wastes, particularly bauxite residue (red mud), represent formidable barriers to sustainable development. The synergistic utilization of bauxite residue (red mud) in cementitious materials and special concrete is widely considered one of the most practical approaches for these issues. In this comprehensive review, characteristics and composition of red mud worldwide were investigated. By comparing and reviewing the latest research, the current achievements in applying red mud with various solid wastes in cementitious materials and special concrete were discussed. In addition, critical mechanisms and environmental suitability issues are emphasized. In conclusion, the present work culminates in identifying the challenges faced and opportunities for progressing in synergizing red mud and multi-solid wastes, which will contribute to the international research community for sustainable development in the industry.

Integrating advanced techniques and machine learning for landfill leachate treatment: Addressing limitations and environmental concerns.

This review article explores the challenges associated with landfill leachate resulting from the increasing disposal of municipal solid waste in landfills and open areas. The composition of landfill leachate includes antibiotics (0.001-100 µg), heavy metals (0.001-1.4 g/L), dissolved organic and inorganic components, and xenobiotics including polyaromatic hydrocarbons (10-25 µg/L). Conventional treatment methods, such as biological (microbial and phytoremediation) and physicochemical (electrochemical and membrane-based) techniques, are available but face limitations in terms of cost, accuracy, and environmental risks. To surmount these challenges, this study advocates for the integration of artificial intelligence (AI) and machine learning (ML) to strengthen treatment efficacy through predictive analytics and optimized operational parameters. It critically evaluates the risks posed by recalcitrant leachate components and appraises the performance of various treatment modalities, both independently and in tandem with biological and physicochemical processes. Notably, physicochemical treatments have demonstrated pollutant removal rates of up to 90% for various contaminants, while integrated biological approaches have achieved over 95% removal efficiency. However, the heterogeneous nature of solid waste composition further complicates treatment methodologies. Consequently, the integration of advanced ML algorithms such as Support Vector Regression, Artificial Neural Networks, and Genetic Algorithms is proposed to refine leachate treatment processes. This review provides valuable insights for different stakeholders specifically researchers, policymakers and practitioners, seeking to fortify waste disposal infrastructure and foster sustainable landfill leachate management practices. By leveraging AI and ML tools in conjunction with a nuanced understanding of leachate complexities, a promising pathway emerges towards effectively addressing this environmental challenge while mitigating potential adverse impacts.

Integrating fuzzy-AHP and GIS for solid waste disposal site selection in Kenitra province, NW Morocco.

Selecting an optimal solid waste disposal site is one of the decisive waste management issues because unsuitable sites cause serious environmental and public health problems. In Kenitra province, northwest Morocco, sustainable disposal sites have become a major challenge due to rapid urbanization and population growth. In addition, the existing disposal sites are traditional and inappropriate. The objective of this study is to suggest potential suitable disposal sites using fuzzy logic and analytical hierarchy process (fuzzy-AHP) method integrated with geographic information system (GIS) techniques. For this purpose, thirteen factors affecting the selection process were involved. The results showed that 5% of the studied area is considered extremely suitable and scattered in the central-eastern parts, while 9% is considered almost unsuitable and distributed in the northern and southern parts. Thereafter, these results were validated using the area under the curve (AUC) of the receiver operating characteristics (ROC). The AUC found was 57.1%, which is a moderate prediction's accuracy because the existing sites used in the validation's process were randomly selected. These results can assist relevant authorities and stakeholders for setting new solid waste disposal sites in Kenitra province.

Critical properties of plastic packaging waste for recycling: A case study on non-beverage plastic bottles in an urban MSW system in Austria.

The low recycling rate of post-consumer plastic packaging waste (PPW), which is partly due to insufficient separate collection, heterogeneous composition and high levels of contamination, poses a challenge in Austria, where the recycling rate must double in order to meet the target of 55 %. This study analyzes key packaging characteristics of non-beverage plastic bottles influencing recyclability, using Vienna as a case study. Additionally, a net quantity indicator and separate collection rates were calculated. 738 bottles from mixed MSW and 1,159 bottles from separate PPW collection were analyzed. The main polymer's proportion described by the net quantity indicator was higher for bottles from separate collection (69-72 %) than from mixed MSW (58 %), showing that a large share of the foreign materials are residues and dirt, with significantly higher contents in mixed MSW (20 %) than in separate collection (11 %). With a separate collection rate of 19.2 %, the great potential for recycling currently lies in mixed MSW at 4,112 t/yr. Thereof, 46 % is uncolored, 54 % is colored/white and, in terms of material grade, 30 % is food grade. The most common filling volume for PET, PP and HDPE was 0.5 < x ≤ 1.5 L (23-59 %) and the most common decoration technology was label (60-85 %). PET and PP had the highest shares of food-grade bottles (37-46 %), while PP had the highest share of colored bottles (22-31 %). The mechanical recycling potential of bottles depends largely on packaging characteristics, influencing separate collection and also automatic sorting. Harmonized design specifications are therefore crucial for this heterogeneous PPW fraction.