The effects of submicron-textured surface topography on antibiotic efficacy against biofilms.

Submicron-textured surfaces have been a promising approach to mitigate biofilm development and control microbial infection. However, the use of the single surface texturing approach is still far from ideal for achieving complete control of microbial infections on implanted biomedical devices. The use of a surface topographic modification that might improve the utility of standard antibiotic therapy could alleviate the complications of biofilms on devices. In this study, we characterized the biofilms of Staphylococcus aureus and Pseudomonas aeruginosa on smooth and submicron-textured polyurethane surfaces after 1, 2, 3, and 7 days, and measured the efficacy of common antibiotics against these biofilms. Results show that the submicron-textured surfaces significantly reduced biofilm formation and growth, and that the efficacy of antibiotics against biofilms grown on textured surfaces was improved compared with smooth surfaces. The antibiotic efficacy appears to be related to the degree of biofilm development. At early time points in biofilm formation, antibiotic treatment reveals reasonably good antibiotic efficacy against biofilms on both smooth and textured surfaces, but as biofilms mature, the efficacy of antibiotics drops dramatically on smooth surfaces, with lesser decreases seen for the textured surfaces. The results demonstrate that surface texturing with submicron patterns is able to improve the use of standard antibiotic therapy to treat device-centered biofilms by slowing the development of the biofilm, thereby offering less resistance to antibiotic delivery to the bacteria within the biofilm community.

Secondary metabolite profile of Streptomyces spp. changes when grown with the sub-lethal concentration of silver nanoparticles: possible implication in novel compound discovery.

The decline of new antibiotics and the emergence of multidrug resistance in pathogens necessitates a revisit of strategies used for lead compound discovery. This study proposes to induce the production of bioactive compounds with sub-lethal concentrations of silver nanoparticles (Ag-NPs). A total of Forty-two Actinobacteria isolates from four Saudi soil samples were grown with and without sub-lethal concentration of Ag-NPs (50 µg ml-1). The spent broth grown with Ag-NPs, or without Ag-NPs were screened for antimicrobial activity against four bacteria. Interestingly, out of 42 strains, broths of three strains grown with sub-lethal concentration of Ag-NPs exhibit antimicrobial activity against Staphylococcus aureus and Micrococcus luteus. Among these, two strains S4-4 and S4-21 identified as Streptomyces labedae and Streptomyces tirandamycinicus based on 16S rRNA gene sequence were selected for detailed study. The change in the secondary metabolites profile in the presence of Ag-NPs was evaluated using GC-MS and LC-MS analyses. Butanol extracts of spent broth grown with Ag-NPs exhibit strong antimicrobial activity against M. luteus and S. aureus. While the extracts of the controls with the same concentration of Ag-NPs do not show any activity. GC-analysis revealed a clear change in the secondary metabolite profile when grown with Ag-NPs. Similarly, the LC-MS patterns also differ significantly. Results of this study, strongly suggest that sub-lethal concentrations of Ag-NPs influence the production of secondary metabolites by Streptomyces. Besides, LC-MS results identified possible secondary metabolites, associated with oxidative stress and antimicrobial activities. This strategy can be used to possibly induce cryptic biosynthetic gene clusters for the discovery of new lead compounds.

Correlation between disinfection efficacy and cumulative amount of free chlorine reaching various positions during ultrasonic fogging with hypochlorite solution.

When a hypochlorite solution is ultrasonically fogged in a room, free chlorine, i.e., HOCl and OCl-, reaches various positions in two forms: fine fog droplets and gaseous hypochlorous acid（HOCl(g)）. In this study, the cumulative amount of free chlorine reaching various positions on the floor away from the fogger was measured in a 90-m3 room, using a sulfamate-carrying glass-fiber filter indicator. The fine droplets were blown out from the fogger into the spaces at different discharge port angles of 30 - 90°. Free chlorine was successfully trapped by sulfamate, forming monochlorosulfamate, which was stably retained on the indicator. The cumulative amount of free chlorine（ ng/indicator） increased with fogging time at each position and depended on the blow angle and distance from the fogger. Minor differences in the HOCl(g) concentration near the floor at all positions were observed. The disinfection efficacy of the fogging treatment against Staphylococcus aureus on wet surfaces was relatively higher at positions near the fogger and lower at positions far from the fogger. At each discharge port angle, a strong correlation between the logarithmic reduction in relative viable cells and the cumulative amount of free chlorine reaching S. aureus plates was observed. The slopes of the regression lines of correlation diagrams as a function of the cumulative amount of free chlorine were between -0.0362 and -0.0413 ng-1. This study demonstrated that the cumulative amount of free chlorine measured using the filter indicator could reflect the sum of the free chlorine of both fine droplets and HOCl(g), and that the disinfection efficiency depended on the cumulative amount of free chlorine reaching different areas.

Integrative omics analysis reveals insights into small colony variants of Staphylococcus aureus induced by sulfamethoxazole-trimethoprim.

BACKGROUND: Long-term treatment with trimethoprim-sulfamethoxazole (SXT) can lead to the formation of small-colony variants (SCVs) of Staphylococcus aureus. However, the mechanism behind SCVs formation remains poorly understood. In this study, we explored the phenotype and omics-based characterization of S. aureus SCVs induced by SXT and shed light on the potential causes of SCV formation. METHODS: Stable SCVs were obtained by continuously treating S. aureus isolates using 12/238 µg/ml of SXT, characterized by growth kinetics, antibiotic susceptibility testing, and auxotrophism test. Subsequently, a pair of representative strains (SCV and its parental strain) were selected for genomic, transcriptomic and metabolomic analysis. RESULTS: Three stable S. aureus SCVs were successfully screened and proven to be homologous to their corresponding parental strains. Phenotypic tests showed that all SCVs were non-classical mechanisms associated with impaired utilization of menadione, heme and thymine, and exhibited slower growth and higher antibiotic minimum inhibitory concentrations (MICs), compared to their corresponding parental strains. Genomic data revealed 15 missense mutations in 13 genes in the representative SCV, which were involved in adhesion, intramolecular phosphate transfer on ribose, transport pathways, and phage-encoded proteins. The combination analysis of transcriptome and metabolome identified 35 overlapping pathways possible associated with the phenotype switching of S. aureus. These pathways mainly included changes in metabolism, such as purine metabolism, pyruvate metabolism, amino acid metabolism, and ABC transporters, which could play a crucial role in promoting SCVs development by affecting nucleic acid synthesis and energy metabolism in bacteria. CONCLUSION: This study provides profound insights into the causes of S. aureus SCV formation induced by SXT. The findings may offer valuable clues for developing new strategies to combat S. aureus SCV infections.

The effect of 3D printing speed and temperature on transferability of Staphylococcus aureus and Escherichia coli during 3D food printing.

The current study aimed to determine if the 3D-printing speed and temperature would impact the transferability of foodborne pathogens from the stainless-steel (SS) food cartridge to the 3D-printed food ink. Staphylococcus aureus and Escherichia coli were inoculated onto the interior surface of the SS food cartridges. Subsequently, a model food ink was extruded with a recommended macronutrient contribution of 55.8, 23.7, and 20.5% of carbohydrates, proteins, and fat, respectively. The impact of 3D-printing temperatures and speeds on transfer rates was analysed using a Two-Way ANOVA. S. aureus was transferred more from the cartridge to the food ink with a population of 3.39, 2.98, and 3.09 log CFU/g compared to 2.03, 2.06, and 2.00 log CFU/g for E. coli at 2000, 3000, and 4000 mm/s printing speed, respectively, at 25 °C. A Kruskal-Wallis Test was employed to investigate the effect of different speeds and temperatures on the transferability of S. aureus and E. coli. Speed was the main factor affecting S. aureus transferability, while temperature (25 and 50 °C) had the greatest impact on E. coli transferability. This research seeks to advance the understanding of 3D-printing parameters in pathogen transferability and help the food industry move towards this technology's quick and safe adoption.

Negative Pressure Level and Effects on Bacterial Growth Kinetics in an in vitro Wound Model.

Negative Pressure Wound Therapy (NPWT) has been widely adopted in wound healing strategies due to its multimodal mechanism of action. While NPWT's positive impression on wound healing is well-established, its effect on bacterial load reduction remains equivocal. This study investigates NPWT's efficacy in reducing bioburden using an in vitro porcine skin model, focusing on the impact of Staphylococcus aureus and Staphylococcus epidermidis. Custom-made negative pressure chambers were employed to apply varying negative pressures. Porcine skin was cut into 5 × 5 cm squares and three standardized wounds of 6 mm each were created using a biopsy punch. Then, wounds were infected with S. aureus and S. epidermidis bacterial suspensions diluted 1:10,000 to obtain a final concentration of 1.5 × 104 CFU/ml and were placed in negative pressure chambers. After incubation, bacterial counts were expressed as colony-forming units (CFU) per ml. For S. aureus at 120 hours, the median CFU, mean area per colony, and total growth area were notably lower at -80 mmHg when compared to -250 mmHg and -50 mmHg, suggesting an optimal negative pressure for the pressure-dependent inhibition of the bacterial proliferation. While analyzing S. epidermidis at 120 hours, the response to the negative pressure was similar but less clear, with the minor CFU at -100 mmHg. The influence of intermittent negative pressure on the S. epidermidis growth showed notably lower median CFU with the interval therapy every hour compared to the S. aureus control group. This study contributes valuable insights into NPWT's influence on the bacterial load, emphasizing the need for further research to reformulate its role in managing contaminated wounds.

Calcium phosphate graphene and Ti3C2Tx MXene scaffolds with osteogenic and antibacterial properties.

Bioactive degradable scaffolds that facilitate bone healing while fighting off initial bacterial infection have the potential to change established strategies of dealing with traumatic bone injuries. To achieve this a composite material made from calcium phosphate graphene (CaPG), and MXene was synthesized. CaPG was created by functionalizing graphene oxide with phosphate groups in the presence of CaBr with a Lewis acid catalyst. Through this transformation, Ca2+ and PO4 3- inducerons are released as the material degrades thereby aiding in the process of osteogenesis. The 2D MXene sheets, which have shown to have antibacterial properties, were made by etching the Al from a layered Ti3AlC2 (MAX phase) using HF. The hot-pressed scaffolds made of these materials were designed to combat the possibility of infection during initial surgery and failure of osteogenesis to occur. These two failure modes account for a large percentage of issues that can arise during the treatment of traumatic bone injuries. These scaffolds were able to retain induceron-eluting properties in various weight percentages and bring about osteogenesis with CaPG alone and 2 wt% MXene scaffolds demonstrating increased osteogenic activity as compared to no treatment. Additionally, added MXene provided antibacterial properties that could be seen at as little as 2 wt%. This CaPG and MXene composite provides a possible avenue for developing osteogenic, antibacterial materials for treating bone injuries.

In Situ Self-Growth of a ZnO Nanorod Array on Nonwoven Fabrics for Empowering Superhydrophobic and Antibacterial Features.

ZnO nanorod nonwoven fabrics (ZNRN) were developed through hydrothermal synthesis to facilitate the prevention of the transmission of respiratory pathogens. The superhydrophobicity and antibacterial properties of ZNRN were improved through the response surface methodology. The synthesized material exhibited significant water repellency, indicated by a water contact angle of 163.9°, and thus demonstrated antibacterial rates of 91.8% for Escherichia coli (E. coli) and 79.75% for Staphylococcus aureus (S. aureus). This indicated that E. coli with thinner peptidoglycan may be more easily killed than S. aureus. This study identified significant effects of synthesis conditions on the antibacterial effectiveness, with comprehensive multivariate analyses elucidating the underlying correlations. In addition, the ZnO nanorod structure of ZNRN was characterized through SEM and XRD analyses. It endows the properties of superhydrophobicity (thus preventing bacteria from adhering to the ZNRN surface) and antibacterial capacity (thus damaging cells through the puncturing of these nanorods). Consequently, the alignment of two such features is desired to help support the development of personal protective equipment, which assists in avoiding the spread of respiratory infections.

Silver nanoparticles biosynthesis using mixture of Lactobacillus sp. and Bacillus sp. growth and their antibacterial activity.

The biosynthesis of nanoparticles offers numerous advantages, including ease of production, cost-effectiveness, and environmental friendliness. In our research, we focused on the bioformation of silver nanoparticles (AgNPs) using a combination of Lactobacillus sp. and Bacillus sp. growth. These AgNPs were then evaluated for their biological activities against multidrug-resistant bacteria. Our study involved the isolation of Bacillus sp. from soil samples and Lactobacillus sp. from raw milk in Dhamar Governorate, Yemen. The synthesized AgNPs were characterized using various techniques such as UV-visible spectroscopy, X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and transmission electron microscopy (TEM). The antibacterial properties of the AgNPs were assessed using the modified Kirby Bauer disk diffusion method against multidrug-resistant strains of Staphylococcus aureus and Pseudomonas aeruginosa. Our results demonstrated that the use of a bacterial mixture for biosynthesis led to faster and more effective production of AgNPs compared to using a single bacterium. The UV-visible spectra showed characteristic peaks indicative of silver nanoparticles, while XRD analysis confirmed the crystalline nature of the synthesized particles. FTIR results suggested the presence of capping proteins that contribute to the synthesis and stability of AgNPs. Furthermore, TEM images revealed the size and morphology of the AgNPs, which exhibited spherical shapes with sizes ranging from 4.65 to 22.8 nm. Notably, the antibacterial activity of the AgNPs was found to be more pronounced against Staphylococcus aureus than Pseudomonas aeruginosa, indicating the potential of these nanoparticles as effective antimicrobial agents. Overall, our study highlights the promising antibacterial properties of AgNPs synthesized by a mixture of Lactobacillus sp. and Bacillus sp. growth. Further research is warranted to explore the potential of utilizing different bacterial combinations for enhanced nanoparticle synthesis.

Complexes of soybean protein fibrils and chlorogenic acid: Interaction mechanism and antibacterial activity.

This study explored the mechanism of interaction between chlorogenic acid (CA) and protein fibrils (PF) as well as the effects of varying the CA/PF concentration ratio on antibacterial activity. Analysis of various parameters, such as ζ-potential, thioflavin T fluorescence intensity, surface hydrophobicity, and free sulfhydryl groups, revealed that the interaction between PF and CA altered the structure of PF. Fluorescence analysis revealed that hydrogen bonding and hydrophobic interactions were the primary interaction forces causing conformational rearrangement, resulting in a shorter, more flexible, and thicker fibril structure, as observed through transmission electron microscopy. Fourier-transform infrared spectroscopy, small-angle X-ray scattering, and X-ray diffraction analyses revealed that the characteristic fibril structure was destroyed when the CA/PF ratio exceeded 0.05. Notably, the CA-PF complexes inhibited the growth of Escherichia coli and Staphylococcus aureus and also exhibited antioxidant activity. Overall, this study expands the application prospects of CA and PF in the food industry.

Preparation of sodium alginate modified silver-metal organic framework and application in citric acid/PVA antimicrobial packaging.

Silver-metal organic framework (Ag@MOF) has exhibited outstanding antimicrobial activity in antimicrobial applications, and reducing the biotoxicity associated with silver has become a research priority. In this study, Ag@MOF was initially modified with sodium alginate (SA) to form SA-Ag@MOF. The results showed that SA could control the release of Ag+, reducing the release by about 8% at 24 h, and the biotoxicity was significantly reduced. Finally, SA-Ag@MOF was applied as an antimicrobial agent in citric acid-modified PVA film to develop a novel composite antimicrobial film. When added at 2 MIC, the CA3-M2 film can effectively inhibit the growth of E. coli and S. aureus, and the inhibition rate has reached 98%. For white radish packaging applications, CA3-M2 film inhibited the growth of surface microorganisms, while ensuring moisture and tissue hardness to extend shelf-life up to 7 days. Overall, the strategy conceived here can be a theoretical basis for novel antimicrobial packaging.

Formation, stability, and antimicrobial efficacy of eutectic nanoemulsions containing thymol and glycerin monolaurate.

In this study, based on the discovery of thymol/glycerol monolaurate (GML) eutectic solvent, we studied the effect of GML as a multi-functional component (ripening inhibitor and antibacterial agent) on the formation, stability and antibacterial activity of eutectic nanoemulsions, and investigated the preservation of nanoemulsion in fresh pork. These results indicated that the formation of eutectic solvent was due to the hydrogen bonding between thymol and GML in the molten state. And eutectic nanoemulsions prepared with medium GML concentrations (20%, 40%, and 60%) of eutectic solvents as oil phases had small droplet diameters (<150 nm), exhibited sustained-release characteristics, and had excellent physicochemical stability. Moreover, the addition of GML enhanced the antibacterial activity of thymol nanoemulsion against S. aureus. as seen by their ability to inhibit affect formation more effectively. Treatment of fresh pork with optimized eutectic nanoemulsions (40% thymol/60% GML) extended its shelf life during refrigeration, which was mainly attributed to the ability of the encapsulated essential oil to inhibit microbial growth and lipid oxidation. These results provide a novel strategy to control Ostwald ripening and maintain the high antibacterial activity of thymol in nanoemulsion-based delivery systems.

Antibacterial activity of lysozyme after association with carboxymethyl konjac glucomannan.

The unique high isoelectric point of lysozyme (LYZ) restricts its application in composite antibacterial coating due to the unfavorable liability to electrostatic interaction with other components. In this work, the antibacterial activity of a dispersible LYZ-carboxymethyl konjac glucomannan (CMKGM) polyelectrolyte complex was evaluated. Kinetic analysis revealed that, compared with free LYZ, the complexed enzyme exhibited decreased affinity (Km) but markedly increased Vmax against Micrococcus lysodeikticus, and QCM and dynamic light scattering analysis confirmed that the complex could bind with the substrate but in a much lower ratio. The complexation with CMKGM did not alter the antibacterial spectrum of LYZ, and the complex exerted antibacterial function by delaying the logarithmic growth phase and impairing the cell integrity of Staphylococcus aureus. Since the LYZ-CMKGM complex is dispersible in water and could be assembled easily, it has great potential as an edible coating in food preservation.

Engineering pineapple peel cellulose nanofibrils with oxidase-mimic functionalities for antibacterial and fruit preservation.

In this study, an antibacterial material (CNF@CoMn-NS) with oxidase-like activity was created using ultrathin cobalt­manganese nanosheets (CoMn-NS) with a larger specific surface area grown onto pineapple peel cellulose nanofibrils (CNF). The results showed that the CoMn-NS grew well on the CNF, and the obtained CNF@CoMn-NS exhibited good oxidase-like activity. The imidazole salt framework of the CNF@CoMn-NS contained cobalt and manganese in multiple oxidation states, enabling an active redox cycle and generating active oxygen species (ROS) such as singlet molecular oxygen atoms (1O2) and superoxide radical (·O2-), resulting in the significant inactivation of Staphylococcus aureus (74.14%) and Escherichia coli (54.87%). Importantly, the CNF@CoMn-NS did not exhibit cytotoxicity. The CNF@CoMn-NS further self-assembled into a CNF@CoMn-NS paper with flexibility, stability, and antibacterial properties, which can effectively protect the wound of two varieties of pears from decay caused by microorganisms. This study demonstrated the potential of using renewable and degradable CNF as substrate combined with artificial enzymes as a promising approach to creating antibacterial materials for food preservation and even extending to textiles and biomedical applications.

In Vitro and In Vivo Testing of Microbe Growth on Antimicrobial Nursing Scrubs.

Around 5% to 10% of hospitalized patients develop a hospital-acquired infection (HAI). Scrubs are a potential vector of HAIs. To compare the antimicrobial characteristics of scrubs with and without an antimicrobial fabric coating, as tested in the laboratory (in vitro) and hospital (in vivo) environments. Two protocols were conducted to address the purpose. The in vitro protocol was a laboratory study that involved observing the microbe growth after inoculating coated and uncoated scrub fabric swatches with S. aureus and then processing them in moist and dry environments. The in vivo protocol was a clinical trial that measured microbe growth on coated and uncoated scrubs prior to and following nursing staff completing a 12-hr shift on an acute care unit, as measured by colony forming units (CFUs). For high-humidity environments, the in vitro study indicated that swatches treated with an antimicrobial coating exhibited minimal microbe growth, while untreated swatches exhibited significant microbe growth. For low-humidity environments, coated and uncoated swatches were all found to exhibit minimal microbe growth. In the in vivo study, the CFUs increased on scrubs worn by nurses over a 12-hr shift with no significant difference in CFUs for coated and uncoated scrubs. For bacteria in a warm and moist environment, the antimicrobial coating was found to be important for inhibiting growth. For bacteria in a warm and dry environment, both coated and uncoated fabrics performed similarly as measured at 24 hr, with minimal bacterial growth observed. In a hospital environment, microbe growth was observed, but no significant difference was detected when comparing coated and uncoated scrubs. This may have been due to the short time between exposure and culturing the scrubs for analysis immediately at the end of the shift not allowing for enough time to kill or inhibit growth. Contact time between the bacteria and scrub fabric (coated or uncoated) in the in vivo study more directly correlated with the 0-hr observations for the in vitro study, suggesting that the ineffectiveness of the treated scrubs in the clinical results may be due in part to short residence times before collection.

The Staphylococcus aureus regulatory program in a human skin-like environment.

Staphylococcus aureus is a Gram-positive pathogen responsible for the majority of skin and soft tissue infections (SSTIs). S. aureus colonizes the anterior nares of approximately 20%-30% of the population and transiently colonizes the skin, thereby increasing the risk of developing SSTIs and more serious infections. Current laboratory models that mimic the skin surface environment are expensive, require substantial infrastructure, and limit the scope of bacterial physiology studies under human skin conditions. To overcome these limitations, we developed a cost-effective, open-source, chemically defined media recipe termed skin-like medium (SLM) that incorporates key aspects of the human skin surface environment and supports growth of several staphylococcal species. We utilized SLM to investigate the transcriptional response of methicillin-resistant Staphylococcus aureus (MRSA) following growth in SLM compared to a commonly used laboratory media. Through RNA-seq analysis, we observed the upregulation of several virulence factors, including genes encoding functions involved in adhesion, proteolysis, and cytotoxicity. To further explore these findings, we conducted quantitative reverse transcription-PCR (qRT-PCR) experiments to determine the influence of media composition, pH, and temperature on the transcriptional response of key factors involved in adhesion and virulence. We also demonstrated that MRSA primed in SLM adhered better to human corneocytes and demonstrated adhesin-specific phenotypes that previously required genetic manipulation. This improved adherence to corneocytes was dependent on both acidic pH and growth in SLM. These results support the potential utility of SLM as an in vitro model for assessing staphylococcal physiology and metabolism on human skin. IMPORTANCE: Staphylococcus aureus is the major cause of skin diseases, and its increased prevalence in skin colonization and infections present a need to understand its physiology in this environment. The work presented here outlines S. aureus upregulation of colonization and virulence factors using a newly developed medium that strives to replicate the human skin surface environment and demonstrates roles for adhesins clumping factor A (ClfA), serine-rich repeat glycoprotein adhesin (SraP), and the fibronectin binding proteins (Fnbps) in human corneocyte adherence.

Synthesis and Characterization of Cassava Gum Hydrogel Associated with Chlorhexidine and Evaluation of Release and Antimicrobial Activity.

Hydrogels from natural sources are attracting increasing interest due to their ability to protect biologically active molecules. Starch extracted from cassava tubers is a promising material for synthesizing these hydrogels. Copolymerization of cassava gum and incorporation of chlorhexidine digluconate (CLX) into the hydrogels is confirmed by changes in the crystallographic profile, as observed through X-ray diffraction, and a shift in the 1000 cm-1 band in the Fourier-transform infrared spectroscopy spectrum. The differential scanning calorimetry reveals changes in the decomposition temperature of the synthesized hydrogels related to CLX volatility. Micrographs illustrate the material's porosity. Release tests indicate a constant linear release over 72 h, while antimicrobial activity against Staphylococcus aureus, Escherichia coli, and Candida albicans is satisfactory, with 100% effectiveness from 0.5% CLX and the formation of inhibition halos. Toxicity and biocompatibility studies show no cytotoxicity. The continuous release of chlorhexidine is promising for components of biomedical implants and applications as it can ensure antimicrobial action according to specific therapeutic needs.

Application of interaction models in predicting the simultaneous growth of Staphylococcus aureus and different concentrations of background microbiota in Chinese-style braised beef.

This study aimed to investigate the growth kinetics of S. aureus and different concentrations of background microbiota in Chinese-style braised beef (CBB). A one-step analysis method was applied to develop predictive model to describe the simultaneous growth and interaction of S. aureus with different concentrations of background microbiota in CBB. The results show that a one-step method successfully models the growth of S. aureus and background microbiota in CBB and the competing interactions between the two. In sterile CBB, the estimated minimum growth temperatures (Tmin,S) and the maximum growth concentrations (Ymax,S) were 8.76 °C and 9.58 log CFU/g for S. aureus. Under competition, the growth of background microbiota was not affected by S. aureus, the estimated Tmin,B and Ymax,B was 4.46 °C and 9.94 log CFU/g. The background microbiota in CBB did not affect the growth rate of S. aureus (α1 = 1.04), but had an inhibitory effect on the number of S. aureus (α2 = 0.69) at the later growth stage. The Root Mean Square Error (RMSE) of the modeling data was 0.34 log CFU/g, with 85.5% of the residual errors within ±0.5 log CFU/g of experimental observations. The one-step analysis and dynamic temperatures (8 °C-32 °C) verification indicated that the RMSE of prediction was <0.5 log CFU/g for both S. aureus and background microbiota. This study demonstrates that microbial interaction models are a useful and promising tool for predicting and evaluating the spatiotemporal population dynamics of S. aureus and background microbiota in CBB products.

The YAP1-TEAD axis promotes autophagy against intracellular Staphylococcus aureus in vitro.

Previously considered as an exclusive extracellular bacterium, Staphylococcus aureus has been shown to be able to invade many cells in vitro and in humans. Once inside the host cell, both cytosolic and endosome-associated S. aureus strongly induce macroautophagy/autophagy. Whether autophagy fosters S. aureus intracellular survival or clearance remains unclear. The YAP1-TEAD axis regulates the expression of target genes controlling the cell fate (e.g., proliferation, migration, cell cycle …). Growing evidence indicates that YAP1-TEAD also regulates autophagy and lysosomal pathways. Recently we showed that the YAP1-TEAD axis promotes autophagy and lysosome biogenesis to restrict S. aureus intracellular replication. We also discovered that the C3 exoenzyme-like EDIN-B toxin produced by the pathogenic S. aureus ST80 strain inhibits YAP1 nuclear translocation resulting in a strong increase of intracellular S. aureus burden.

Tasa de Staphylococcus aureus resistentes a meticilina en urgencias pediátricas en España / Rate of methicillin-resistant Staphylococcus aureus in pediatric emergency departments in Spain

Introducción: Staphylococcus aureus (S. aureus) es un germen frecuente en las infecciones bacterianas infantiles. Últimamente la tasa de S. aureus resistente a meticilina (SAMR) está aumentando.Objetivos: Principal: conocer la tasa de cultivos positivos a SAMR en los servicios de urgencias pediátricos españoles. Secundarios: analizar factores de riesgo de aislamiento de SAMR (procedencia del paciente, antecedentes de hospitalización o cirugía en los 90 días previos, de antibioterapia en los 60 días previos, presencia de comorbilidad, dispositivos invasivos, aislamiento SAMR previo) y la morbilidad de estas infecciones.Metodología: Estudio retrospectivo multicéntrico (1/07/2017-30/06/2018) con revisión de historias de pacientes con aislamiento de S. aureus en muestras de cualquier origen obtenidas en 8 servicios de urgencias pediátricos del Grupo de Trabajo de Enfermedades Infecciosas de la Sociedad Española de Urgencias de Pediatría.Resultados: Durante dicho periodo se aisló S. aureus en 403 pacientes (edad media 75,8±59,2 meses; 54,8% hombres): 28,8% infecciones relacionadas con el hospital y 71,2% con la comunidad. Tasa global de SAMR: 16,6% (IC95%: 13-20,2%); 18,1% en infecciones relacionadas con el hospital y 16,2% en infecciones relacionadas con la comunidad (p>0,05). Las tasas más altas de SAMR se obtuvieron en abscesos cutáneos (29,3%; IC95%: 21,8-36,8%), pacientes no nacidos en España (52%; IC95%: 32-72%) o con una infección previa por SAMR (90%; IC95% 71,4-100%). Ingresaron 167 pacientes (41%), presentaron complicaciones 12 (3%) y secuelas 4 (1%). No hubo fallecimientos. (AU)

Introduction: Staphylococcusaureus (S. aureus) is a common germ present in bacterial infections in children. Lately, the rate of methicillin-resistant S. aureus (MRSA) is increasing.Objectives: The main aim of this study is to know the rate of positive cultures to MRSA in Spanish pediatric emergency departments. The secondary aims are to analyze the risk factors for MRSA isolation (patient origin, history of hospitalization or surgery in the previous 90 days, antibiotherapy in the previous 60 days, presence of comorbidity, invasive devices, prior MRSA isolation) and to analyze the morbidity of these infections.Methodology: Retrospective multicenter study (07/01/2017–06/30/2018) with review of patient histories with isolation of S. aureus in samples of any origin obtained in 8 pediatric emergency departments of the Infectious Diseases Working Group of the Spanish Society of Pediatric Emergencies.Results: During this period, S. aureus was detected in 403 patients (average age 75.8±59.2 months; 54.8% male): 28.8% hospital-related infections and 71.2% community-related infections. Overall, MRSA rate was 16.6% (95% CI: 13-20.2%); 18.1% in hospital-related infections and 16.2% in community-related infections (P>.05). The highest rates of MRSA were obtained in skin abscesses (29.3%, 95% CI: 21.8-36.8%), patients not born in Spain (52%; 95% CI: 32-72%) or patients with a previous MRSA infection (90%; 95% CI: 71.4-100%).167 (41%) patients were admitted, 12 (3%) had complications and 4 (1%) suffered sequels. There were no deaths. (AU)