Effects of thermal processing on natural antioxidants in fruits and vegetables.

Research on the content of polyphenolic compounds in fruits and vegetables, the extraction of bioactive compounds, and the study of their impact on the human body has received growing attention in recent years. This is due to the great interest in bioactive compounds and their health benefits, resulting in increased market demand for natural foods. Bioactive compounds from plants are generally categorized as natural antioxidants with health benefits such as anti-inflammatory, antioxidant, anti-diabetic, anti-carcinogenic, etc. Thermal processing has been used in the food sector for a long history. Implementing different thermal processing methods could be essential in retaining the quality of the natural antioxidant compounds in plant-based foods. A comprehensive review is presented on the effects of thermal blanching (i.e., hot water, steam, superheated steam impingement, ohmic and microwave blanching), pasteurization, and sterilization and drying technologies on natural antioxidants in fruits and vegetables.

Extracellular matrix of lung scaffolds submitted to different means of sterilization: a systematic review.

Chronic respiratory diseases often necessitate lung transplantation due to irreversible damage. Organ engineering offers hope through stem cell-based organ generation. However, the crucial sterilization step in scaffold preparation poses challenges. This study conducted a systematic review of studies that analysed the extracellular matrix (ECM) conditions of decellularised lungs subjected to different sterilisation processes. A search was performed for articles published in the PubMed, Web of Sciences, Scopus, and SciELO databases according to the PRISMA guidelines. Overall, five articles that presented positive results regarding the effectiveness of the sterilisation process were selected, some of which identified functional damage in the ECM. Was possible concluded that regardless of the type of agent used, physical or chemical, all of them demonstrated that sterilisation somehow harms the ECM. An ideal protocol has not been found to be fully effective in the sterilisation of pulmonary scaffolds for use in tissue and/or organ engineering.

[Thoughts on Evaluation of Culture Medium for Human Assisted Reproduction Technology].

As the direct microenvironment of assisted reproductive technology, the evaluation of culture medium for human assisted reproduction technology is particularly important. This paper discussed the classification management, technical review points, clinical evaluation and review thinking, focusing on the basic requirements, raw material control, biological evaluation, sterilization process of culture medium for human assisted reproduction technology, combined with some material limit, new added material and quality system control to thoroughly assess management risk of the whole life cycle of culture medium for human assisted reproduction technology.

Sterile Basics of Compounding: Repackaging, Part 1.

This article on the topic of sterile and nonsterile repackaging is based on the content of United States Pharmacopeia 35-National Formulary 30 and how the respective official chapters of the publication relate to pharmacy compounding and practice. The article differentiates between commercial repackagers and pharmacists that repackage in their pharmacy for their patients. It also discusses the standards for packaging and the beyond-use dates that should be assigned.

Post sterilization of intraoral scan body and the effect it has on the axes and distances between three adjacent implants: in-vitro study.

BACKGROUND: The purpose of this pilot in-vitro study was to assess the effect of sterilization on the intra-implant axis, inter-implant axis, intra-implant distance and inter-implant distance of three implants in a straight line by using laboratory scanner (LBS) versus intra-oral scanner (IOS) with intra-oral scan bodies (ISB). METHODS: A printed 3D model with three internal hex analogs in the positions 15#,16#,17# was used. Zirkonzhan (ZZ) intra-oral scan body (ISB), two-piece titanium was used. The ZZ ISBs were scanned by 7 Series dental wings (LBS) and 30 times by Primescan (IOS) pre sterilization and 30 times post sterilization. For each scan (pre and post) stereolithography (STL) file was created and a comparison between all the scans pre sterilization and post sterilization were superimposed on the laboratory scan by using a 3D analyzing software. A Kolmogorov-Smirnov test performed followed by Wilcoxon Signed Ranks tests. (p < 0.05) Results: Post sterilization of the ZZ ISB, the mean errors were significantly increased for the inter-implant distances (p < 0.0005), intra-implant distances 1,2,3 (p < 0.0005), intra-implant axis 1,3 (p < 0.0005) and inter-implant axes 13,23 (p < 0.05). In contrast, the mean errors for intra-implant axis 2 (p < 0.0005) and inter-implant axis 12 (p < 0.0005) were significantly reduced. CONCLUSIONS: ZZ ISB showed changes in all four parameters after sterilization. The middle ISB had the largest changes in mean error regarding all four parameters. Sterilization process may affect the three-dimensional (3D) structure of the ZZ ISB after three cycles. There is a lack in the literature in this field and there is a need for further studies to explore the effect of sterilization (multiple cycles) on different ISBs and for creating an approved guidelines regarding the amount of sterilization for each ISB in the industry.

UV-ozone sterilization system: An intelligent solution for Northern shrimp (Pandalus borealis) cold chain transportation emergencies.

Sterilization of Northern shrimp (Pandalus borealis) is a key tool to ensure their freshness for post-production transportation. However, in the face of the specific problem of quality deterioration caused by the increase of storage environment temperature due to unexpected circumstances or the prolongation of temporary storage time, it is still a technical challenge to realize intelligent decision-making and higher sterilization efficiency. In this paper, we propose an intelligent UV-Ozone sterilization system suitable for cold chain transportation of Northern shrimp (Pandalus borealis). Using hierarchical analysis, equipartition method and the prediction method of generalized linear model, combined with the technology of intelligent control and remote control, we realized the automatic control of the system's UV irradiance from 324 âˆ¼ 1620 J/m2, and ozone concentration from21.4 ∼ 107 mg/cm3 in a graded manner. The accuracy of the predicted structure was verified using a combination of direct measurement and simulation. In addition, the key model of the system, the intensity level decision model, was tested, and the test results showed that the decision model was able to accurately make decisions during the sterilization of Northern shrimp (Pandalus borealis), and the system was able to achieve a sterilization effect of 1-3 orders of magnitude. This reduces quality loss due to unexpected conditions, facilitates real-time monitoring of transported samples by staff, extends the shelf life of the samples, and improves the accuracy of sterilization, increasing the economic value of Northern shrimp (Pandalus borealis).

Apt-Conjugated PDMS-ZnO/Ag-Based Multifunctional Integrated Superhydrophobic Biosensor with High SERS Activity and Photocatalytic Sterilization Performance.

Sensitive detection and efficient inactivation of pathogenic bacteria are crucial for halting the spread and reproduction of foodborne pathogenic bacteria. Herein, a novel Apt-modified PDMS-ZnO/Ag multifunctional biosensor has been developed for high-sensitivity surface-enhanced Raman scattering (SERS) detection along with photocatalytic sterilization towards Salmonella typhimurium (S. typhimurium). The distribution of the electric field in PDMS-ZnO/Ag with different Ag sputtering times was analyzed using a finite-difference time-domain (FDTD) algorithm. Due to the combined effect of electromagnetic enhancement and chemical enhancement, PDMS-ZnO/Ag exhibited outstanding SERS sensitivity. The limit of detection (LOD) for 4-MBA on the optimal SERS substrate (PZA-40) could be as little as 10-9 M. After PZA-40 was modified with the aptamer, the LOD of the PZA-40-Apt biosensor for detecting S. typhimurium was only 10 cfu/mL. Additionally, the PZA-40-Apt biosensor could effectively inactivate S. typhimurium under visible light irradiation within 10 min, with a bacterial lethality rate (Lb) of up to 97%. In particular, the PZA-40-Apt biosensor could identify S. typhimurium in food samples in addition to having minimal cytotoxicity and powerful biocompatibility. This work provides a multifunctional nanoplatform with broad prospects for selective SERS detection and photocatalytic sterilization of pathogenic bacteria.

[Design and application of a disposable self-destructed and sheath-encased sterile acupuncture needle].

A kind of disposable self-destructed and sheath-encased sterile acupuncture needle is designed to efficiently solve the issues of safety and sterilization encountered in the routine operation of acupuncture. The needle consists of three components, i.e. the needle body, the sheath and the locker. The needle body is movable and rotatable in the sheath, but can not be separated from the sheath. It is convenient for the operator to perform the lifting-thrusting and twisting techniques, and to prevent the non-punctured portion of the body from being out off the sheath so that a sterile confined room is formed between the needle and the skin of the operated area. With a locker installed between the sheath and the needle handle, after needle removal, the needle body can be returned and locked in the sheath, avoiding the exposure of needle tip, obtaining the self-destruction of needle and preventing from needling accident and reuse of needle. The devise is operated easily, which is effectively reduce the risk of infection and ensure the safety of medical staffs in practice.

Adverse effects of sterilization processes on the fundamental topographic properties of modified dental implant surfaces.

The employ of sterilization processes are essential to investigate biomaterials aiming for experimental, preclinical, or clinical applications with biological tissues. However, responsive surface properties of biomaterials may be susceptible to sterilization processes, compromising important physio-chemical characteristics. For that reason, this in vitro study aimed to investigate the effects of three different processes for sterilization (humid heat under pressure, UVC-light exposure, and Gamma irradiation) on the major topographical properties of implant surfaces applied to dental bone-anchored implants and/or implant-abutments. Three groups of implant surfaces were developed: a smooth machined surface, a micro-texturized surface, and a hydrophilic micro-texturized surface. The implants were sterilized with three methodologies and characterized regarding surface morphology, elemental surface composition, roughness parameters, wettability characteristics, and compared to the samples as-developed. Surface morphology and roughness parameters were not modified by any of the sterilization processes applied. On the other hand, hydrophilic implants were negatively affected by autoclaving. After package opening, hydrophilic features showed to be sensible to atmospheric air exposition independently of the sterilization process performed. Our findings revealed significant chemical changes on the implant surfaces caused by autoclaving and UVC exposure; additionally, the results showed the importance of selecting an appropriate sterilization method when investigating hydrophilic implants so as not to generate imprecise outcomes.

Development of the headspace gas chromatography-tandem mass spectrometry method for ethylene oxide and ethylene chlorohydrin residue in medical devices.

RATIONALE: Ethylene oxide (EO) sterilization is commonly employed for the sterilization of medical devices and has a very high market share. However, EO and its metabolite ethylene chlorohydrin (ECH) are toxic to humans. In compliance with the classification and residue limits of medical devices defined by ISO 10993-7, our study established two extraction methods for the testing of EO and ECH. METHODS: The first method involves simulated-use extraction using water as the extraction solvent. While the second, exhaustive extraction, directly extracts sample through headspace sampling analysis. Gas chromatography-tandem mass spectrometry in multiple reaction monitoring mode was utilized, requiring only 16 min. Then, the developed method was applied to assess 10 commercially available medical devices sterilized by EO. RESULTS: In simulated-use extraction, calibration curves were evaluated in the range of 1-100 and 5-500 µg for EO and ECH, respectively (r > 0.999). Inter-day recoveries ranged from 85.0% to 95.2% and from 94.8% to 102.4%. In exhaustive extraction, calibration curves spanned 0.5-50 and 2-200 µg for EO and ECH, respectively (r > 0.999). Inter-day recoveries ranged from 101.6% to 102.1% for EO and from 98.1% to 102.2% for ECH. After analysis of the 10 commercially available medical devices, two cotton swabs were found to have ECH of 35.1 and 28.4 µg per device, and four medical devices were found to have EO with concentration below the limit of quantification. Meanwhile, we found that the EO internal standard (propylene oxide) recommended by ISO 10993-7 had interference problems with other similar substances and was not suitable as an internal standard for EO. CONCLUSIONS: This study offers a sensitive and straightforward analytical approach to EO and ECH residues in a variety of medical devices. In addition, the results show that the EO or ECH content of these types of medical devices in our study falls below the regulatory limits, therefore instilling confidence among consumers regarding their safe use.

Autoclaving is at least as effective as gamma irradiation for biotic clearing and intentional microbial recolonization of soil.

Sterilization is commonly used to remove or reduce the biotic constraints of a soil to allow recolonization by soil-dwelling organisms, with autoclaving and gamma irradiation being the most frequently used approaches. Many studies have characterized sterilization impacts on soil physicochemical properties, with gamma irradiation often described as the preferred approach, despite the lower cost and higher scalability of autoclaving. However, few studies have compared how sterilization techniques impact soil recolonization by microorganisms. Here, we compared how two sterilization approaches (autoclaving; gamma irradiation) and soil washing impacted microbial recolonization of soil from a diverse soil inoculum. Sterilization method had little impact on microbial alpha diversity across recolonized soils. For sterile soil regrowth microcosms, species richness and diversity were significantly reduced by autoclaving relative to gamma irradiation, particularly for fungi. There was no impact of sterilization method on bacterial composition in recolonized soils and minimal impact on fungal composition (P = 0.05). Washing soils had a greater impact on microbial composition than sterilization method, and sterile soil regrowth had negligible impacts on microbial recolonization. These data suggest that sterilization method has no clear impact on microbial recolonization, at least across the soils tested, indicating that soil autoclaving is an appropriate and economical approach for biotically clearing soils.IMPORTANCESterilized soils represent soil-like environments that act as a medium to study microbial colonization dynamics in more "natural" settings relative to artificial culturing environments. Soil sterilization is often carried out by gamma irradiation or autoclaving, which both alter soil properties, but gamma irradiation is thought to be the gentler technique. Gamma irradiation can be cost prohibitive and does not scale well for larger experiments. We sought to examine how soil sterilization technique can impact microbial colonization, and additionally looked at the impact of soil washing which is believed to remove soil toxins that inhibit soil recolonization. We found that both gamma-irradiated and autoclaved soils showed similar colonization patterns when reintroducing microorganisms. Soil washing, relative to sterilization technique, had a greater impact on which microorganisms were able to recolonize the soil. When allowing sterilized soils to regrow (i.e., persisting microorganisms), gamma irradiation performed worse, suggesting that gamma irradiation does not biotically clear soils as well as autoclaving. These data suggest that both sterilization techniques are comparable, and that autoclaving may be more effective at biotically clearing soil.

Sandwich-structured continuous ZIF-8/Ti3C2 MXene/ZIF-8 for efficient sterilization: Enhanced photocatalytic activity, photothermal effect, and environmental safety.

The development of effective water purification systems is crucial for controlling and remediating environmental pollution, especially in terms of sterilization. Herein, we demonstrate elaborately designed composite nanosheets with a sandwich structure, composed of two-dimensional (2D) Ti3C2 MXene nanosheet core and conformal ZIF-8 ultrathin outer layers, and their potential applications in photocatalytic sterilization. The study results indicate that the conformal ZIF-8-MXene nanosheet exhibits an expanded light absorption range (826 nm), improved photothermal conversion efficiency (6.2 °C s-1), and photocurrent response, thus boosting photocatalytic sterilization efficiency (6.63 log10 CFU mL-1) against Escherichia coli under simulated sunlight within 90 min. Interestingly, 2D ZIF-8 layers exhibit positive zeta potential (19 mV), good hydrophilicity (40.6°), and local photogenerated-hole accumulation, possessing efficient bacteria-trapping efficiency. Membrane filters fabricated from optimized composite nanosheets exhibit an outstanding bacteria-trapping and sterilization efficiency (almost 100 %) against Escherichia coli under simulated sunlight within 30 min of the flow photocatalytic experiments. This work not only presents a rational structural design of the conformal and ultrathin anchoring of ZIF-8 onto a 2D conductive material for bacteria-trapping and sterilization, but also opens new opportunities for using metal-organic frameworks in photocatalytic disinfection of drinking water.

3D printed autoclavable biocompatible biodegradable bioreactor vessels with integrated sparger made from poly-lactic acid.

3D printing has become widespread for the manufacture of parts in various industries and enabled radically new designs. This trend has not spread to bioprocess development yet, due to a lack of material suitable for the current workflow, including sterilization by autoclaving. This work demonstrates that commercially available heat temperature stable poly-lactic acid (PLA) can be used to easily manufacture novel bioreactor vessels with included features like harvest tubes and 3D printed spargers. Temperature responsiveness was tested for PLA, temperature stable PLA (PLA-HP) and glass for temperatures relevant for insect and mammalian cell culture, including temperature shifts within the process. Stability at 27 °C and 37 °C as well as temperature shifts to 22 °C and 32 °C showed acceptable performance with slightly higher temperature overshoot for 3D printed vessels. A stable temperature is reached after 2 h for PLA, 3 h for PLA-HP and 1 h for glass reactors. Temperature can be maintained with a fluctuation of 0.1 °C for all materials. A 3D printed sparger design directly integrated into the vessel wall and bottom was tested under three different conditions (0.3 SLPH and 27 °C, 3 SLPH and 37 °C and 13 SLPH and 37 °C). The 3D printed sparger showed a better kLa than the L-Sparger with more pronounced differences for higher flowrates. An insect cell culture run in the novel vessel exhibited the same growth behavior as that in standard glass vessels, reaching the same maximum cell concentration. Being 3D printed from biodegradable materials, these bioreactors offer design flexibility for novel bioreactor formats. Additionally, their autoclavability allows seamless integration into standard workflows.

Cold Atmospheric Pressure Plasma Solutions for Sustainable Food Packaging.

Increasing the number of resistant bacteria resistant to treatment is one of the leading causes of death worldwide. These bacteria are created in wounds and injuries and can be transferred through hospital equipment. Various attempts have been made to treat these bacteria in recent years, such as using different drugs and new sterilization methods. However, some bacteria resist drugs, and other traditional methods cannot destroy them. In the meantime, various studies have shown that cold atmospheric plasma can kill these bacteria through different mechanisms, making cold plasma a promising tool to deactivate bacteria. This new technology can be effectively used in the food industry because it has the potential to inactivate microorganisms such as spores and microbial toxins and increase the wettability and printability of polymers to pack fresh and dried food. It can also increase the shelf life of food without leaving any residue or chemical effluent. This paper investigates cold plasma's potential, advantages, and disadvantages in the food industry and sterilization.

Effects of steaming on physicochemical and emulsification properties of gum arabic.

Gum arabic finds extensive application and typically undergoes sterilization prior to utilization in the food industry. This study explored the impact of steam sterilization temperature and duration on the physicochemical and emulsification characteristics of gum arabic, accompanied by proposed mechanisms elucidating observed effects. The results showed that when gum arabic was treated with high temperature sterilization (110 °C âˆ¼ 140 °C), the emulsion prepared turned unstable. The interfacial tension decreased from 8.26 mN/m to 6.77 mN/m after sterilization, while the elastic modulus decreased from 23.65 mN/m to 16.16 mN/m. Moreover, the circular dichroic chromatographic results indicated that the arabinogalactan protein (AGP) structure of gum arabic was more relaxed after high temperature treatment with ß-sheets content decreased from 36.2 % to 29.8 % and random coil content increased from 41.3 % to 51.8 %. Quartz crystal microbalance with dissipation (QCM-D) results demonstrated that emulsion surface film thickness and toughness decreased after sterilization treatment of gum arabic. The study indicates that high temperature sterilization may change protein structure in gum arabic and reduce the stability of prepared emulsions.

Dialdehyde cellulose films covalently crosslinked with porphyrin-based covalent organic polymers for photodynamic sterilization.

Foodborne pathogens result in a great harm to human, which is an urgent problem to be addressed. Herein, a novel cellulose-based packaging films with excellent anti-bacterial properties under visible light were prepared. A porphyrin-based covalent organic polymer (Por-COPs) was constructed, then covalently grafted onto dialdehyde cellulose (DAC). The addition of Por-COPs enhanced the mechanical, hydrophobicity, and water resistance of the DAC-based composite films. DAC/Por-COP-2.5 film exhibited outstanding properties for the photodynamic inactivation of bacteria under visible light irradiation, delivering inactivation efficiencies of 99.90 % and 99.45 % towards Staphylococcus aureus and Escherichia coli within 20 min. The DAC/Por-COPs films efficiently generated •O2- and 1O2 under visible light, thereby causing oxidative stress to cell membranes for bacterial inactivation. The prepared composite film forms a protective barrier against bacterial contamination. Results guide the development of high performance and more sustainable packaging films for the food sector.

Zinc hexacyanoferrate/g-C3N4 nanocomposites with enhanced photothermal and photodynamic properties for rapid sterilization and wound healing.

Photoactivated therapy has gradually emerged as a promising and rapid method for combating bacteria, aimed at overcoming the emergence of drug-resistant strains resulting from the inappropriate use of antibiotics and the subsequent health risks. In this work, we report the facile fabrication of Zn3[Fe(CN)6]/g-C3N4 nanocomposites (denoted as ZHF/g-C3N4) through the in-situ loading of zinc hexacyanoferrate nanospheres onto two-dimensional g-C3N4 sheets using a simple metal-organic frameworks construction method. The ZHF/g-C3N4 nanocomposite exhibits enhanced antibacterial activity through the synergistic combination of the excellent photothermal properties of ZHF and the photodynamic capabilities of g-C3N4. Under dual-light irradiation (420 nm + 808 nm NIR), the nanocomposites achieve remarkable bactericidal efficacy, eliminating 99.98% of Escherichia coli and 99.87% of Staphylococcus aureus within 10 minutes. Furthermore, in vivo animal experiments have demonstrated the outstanding capacity of the composite in promoting infected wound healing, achieving a remarkable wound closure rate of 99.22% after a 10-day treatment period. This study emphasizes the potential of the ZHF/g-C3N4 nanocomposite in effective antimicrobial applications, expanding the scope of synergistic photothermal/photodynamic therapy strategies.

The Impact of Repeated Steam Sterilization Cycles on the Efficacy of Chairside Adjustment Kits for Polishing Monolithic Multi-Layered Zirconia Dental Restoration Material.

BACKGROUND Before insertion, chairside adjustment kits are heat sterilized for positioning and polishing dental restorations. This study aimed to evaluate the effects of 2 steam sterilization cycles on the efficacy of polishing highly translucent monolithic zirconia (HTMLZ) dental restoration material. MATERIAL AND METHODS 100 HTMLZ disc-shaped specimens were adjusted (grinding, finishing, polishing) with EVE Diacera kit. Two steam sterilization techniques [standard (Gp S), immediate/flash (Gp (F)] of CAK were further subgrouped based on number of sterilization cycles [cycle 1 (control), cycle 5, 10, 15, and 20 (experimental)] (n=10 each). Each subgroup accordingly was evaluated for average surface roughness (Ra) and root mean square roughness (Rq) using a profilometer. Mean and standard deviation of 5 subgroups were statistically analyzed using one-way ANOVA/post hoc Tukey's test. Scanning electron microscopy complemented Ra, Rq measurements. Statistical differences of P≤0.05 were considered significant. RESULTS HTMLZ specimens in both groups showed increased (Ra/Rq) values after repeated sterilization of EVE Diacera kit, with Gp F showing lesser increase than Gp S (20 cycles). Gp F at 10 cycles and Gp S at 15 cycles showed clinically unacceptable roughness threshold (0.25 µm). Differences between subgroups for Ra and Rq values were significant (P≤0.05) with less differences within groups observed in early cycles (1, 10). Results validate the manufacturer's recommendations of using flash sterilization/10 cycles for EVE Diacera kit. CONCLUSIONS Repeated sterilization reduces efficacy of chairside adjustment kit to produce smooth surfaces on HTMLZ. This study recommends flash sterilization to a maximum of 10 times to get the clinically acceptable results of Ra and Rq.