Effect of occupational exposure to vat-textile dyes on follicular and luteal hormones in female dye workers in Abeokuta, Nigeria.

Background: Some synthetic dyes used mainly in textile industries have been associated with endocrine disruption, resulting in infertility, among other disorders. It is unknown if occupational exposure to Vat textile dyes among premenopausal dyers alters hormonal levels. Objectives: We aimed at determining the probable effects of occupational exposure to Vat dyes on reproductive hormones of female textile dyers in the follicular and luteal phases while relating this to age categories and duration of exposure. Methods: Thirty-three premenopausal Vat textile dyers at "Itoku", Abeokuta, Nigeria, among a population of about 80 female dyers were age and sex-matched with 55 non-exposed (control) female participants. Using semi-structured questionnaires, socio-demographic, occupational details and the LMP of participants were obtained. Serum samples were collected in follicular and luteal phases and assayed for female sex hormones using Enzyme Immunoassay. Mann-Whitney U and Z- statistic were used for comparison of the two groups. P-value < 0.05 was considered to be significant. Results: In the follicular phase, the result showed a lower mean FSH ranking (in age category ≤20 years) and higher (p<0.05) Estradiol ranking (in age category 31-40 years) in the exposed than the unexposed. Mean ranks of Progesterone and Estradiol in the luteal phase (age category 31-40 years) were higher (p<0.05) in the exposed, while Estradiol (age category ≥41years) ranked lower (p<0.05). Prolactin demonstrated a significant inverse relationship with the duration of exposure. Conclusion: Occupational exposure to Vat dye among female dyers in Abeokuta is associated with some sex hormone disruption which appears to be age and duration of exposure-related.

Omics-Based Approaches in Research on Textile Dye Microbial Decolorization.

The development of the textile industry has negative effects on the natural environment. Cotton cultivation, dyeing fabrics, washing, and finishing require a lot of water and energy and use many chemicals. One of the most dangerous pollutants generated by the textile industry is dyes. Most of them are characterized by a complex chemical structure and an unfavorable impact on the environment. Especially azo dyes, whose decomposition by bacteria may lead to the formation of carcinogenic aromatic amines and raise a lot of concern. Using the metabolic potential of microorganisms that biodegrade dyes seems to be a promising solution for their elimination from contaminated environments. The development of omics sciences such as genomics, transcriptomics, proteomics, and metabolomics has allowed for a comprehensive approach to the processes occurring in cells. Especially multi-omics, which combines data from different biomolecular levels, providing an integrative understanding of the whole biodegradation process. Thanks to this, it is possible to elucidate the molecular basis of the mechanisms of dye biodegradation and to develop effective methods of bioremediation of dye-contaminated environments.

Exploring the decolorization efficiency and biodegradation mechanisms of different functional textile azo dyes by Streptomyces albidoflavus 3MGH.

Efficiently mitigating and managing environmental pollution caused by the improper disposal of dyes and effluents from the textile industry is of great importance. This study evaluated the effectiveness of Streptomyces albidoflavus 3MGH in decolorizing and degrading three different azo dyes, namely Reactive Orange 122 (RO 122), Direct Blue 15 (DB 15), and Direct Black 38 (DB 38). Various analytical techniques, such as Fourier Transform Infrared (FTIR) spectroscopy, High-Performance Liquid Chromatography (HPLC), and Gas Chromatography-Mass Spectrometry (GC-MS) were used to analyze the degraded byproducts of the dyes. S. albidoflavus 3MGH demonstrated a strong capability to decolorize RO 122, DB 15, and DB 38, achieving up to 60.74%, 61.38%, and 53.43% decolorization within 5 days at a concentration of 0.3 g/L, respectively. The optimal conditions for the maximum decolorization of these azo dyes were found to be a temperature of 35 °C, a pH of 6, sucrose as a carbon source, and beef extract as a nitrogen source. Additionally, after optimization of the decolorization process, treatment with S. albidoflavus 3MGH resulted in significant reductions of 94.4%, 86.3%, and 68.2% in the total organic carbon of RO 122, DB 15, and DB 38, respectively. After the treatment process, we found the specific activity of the laccase enzyme, one of the mediating enzymes of the degradation mechanism, to be 5.96 U/mg. FT-IR spectroscopy analysis of the degraded metabolites showed specific changes and shifts in peaks compared to the control samples. GC-MS analysis revealed the presence of metabolites such as benzene, biphenyl, and naphthalene derivatives. Overall, this study demonstrated the potential of S. albidoflavus 3MGH for the effective decolorization and degradation of different azo dyes. The findings were validated through various analytical techniques, shedding light on the biodegradation mechanism employed by this strain.

Comprehensive study on the selection and performance of the best electrode pair for electrocoagulation of textile wastewater using multi-criteria decision-making methods (TOPSIS, VIKOR and PROMETHEE II).

The accelerating environmental impact of the textile industry, especially in water management, requires efficient wastewater treatment strategies. This study examines the effectiveness of various electrode pairs in the Electrocoagulation (EC) process for treating textile wastewater, focusing on removing of Total Suspended Solids (TSS), turbidity, Chemical Oxygen Demand (COD), and Total Organic Carbon (TOC). A comprehensive analysis was conducted using thirty-six electrode pair combinations, consisting of six materials: Aluminium (Al), Zinc (Zn), Carbon (C), Copper (Cu), Mild Steel (MS), and Stainless Steel (SS). The results demonstrated that different electrode pairs yielded varying removal efficiencies for various pollutants, with the highest efficiencies being 92.09% for COD (Al-C pair), 99.66% for TSS (Al-Cu pair), 99.17% for turbidity (Al-MS pair), and 70.99% for TOC (SS-SS pair). However, no single electrode pair excelled in removing all pollutant categories. To address this, three Multi-Criteria Decision Making (MCDM) methods such as TOPSIS, VIKOR, and PROMETHEE II were used to assess the most effective electrode pair. The results indicated that the Al-Zn combination was the most efficient, exhibiting high removal efficiencies for various pollutants (99.32% for TSS, 98.88% for turbidity, 68.62% for COD, and 57.96% for TOC). This study demonstrates that the EC process can effectively treat textile effluent and emphasizes the importance of selecting suitable electrode materials. Furthermore, pollutant removal was optimal with the Al-Zn electrode pair, offering a balanced and efficient approach to textile wastewater treatment. Thus, MCDM methods offer a robust framework for assessing and optimizing electrode selection, providing valuable insights for sustainable environmental management practices.

Bioaugmented biological contact oxidation reactor for treating simulated textile dyeing wastewater.

In this study, modified polyamide fibers were used as biocarriers to enrich dense biofilms in a multi-stage biological contact oxidation reactor (MBCOR) in which partitioned wastewater treatment zone (WTZ) and bioaugmentation zone (BAZ) were established to enhance the removal of methyl orange (MO) and its metabolites while minimizing sludge yields. WTZ exhibited high biomass loading capacity (5.75 ± 0.31 g/g filler), achieving MO removal rate ranging from 68 % to 86 % under different aeration condition within 8 h in which the most dominant genus Chlorobium played an important role. In the BAZ, Pseudoxanthomonas was the dominant genus while carbon starvation stimulated the enrichment of chemoheterotrophy and aerobic_chemoheterotrophy genes thereby enhanced the microbial utilization of cell-released substrates, MO as well as its metabolic intermediates. These results revealed the mechanism bioaugmentation on MBCOR in effectively eliminating both MO and its metabolites.

Upcycling of cellulosic textile waste with bacterial cellulose via Ioncell® technology.

Currently the textile industry relies strongly on synthetic fibres and cotton, which contribute to many environmental problems. Man-made cellulosic fibres (MMCF) can offer sustainable alternatives. Herein, the development of Lyocell-type MMCF using bacterial cellulose (BC) as alternative raw material in the Ioncell® spinning process was investigated. BC, known for its high degree of polymerization (DP), crystallinity and strength was successfully dissolved in the ionic liquid (IL) 1,5-diazabicyclo[4.3.0]non-5-enium acetate [DBNH][OAc] to produce solutions with excellent spinnability. BC staple fibres displayed good mechanical properties and crystallinity (CI) and were spun into a yarn which was knitted into garments, demonstrating the potential of BC as suitable cellulose source for textile production. BC is also a valuable additive when recycling waste cellulose textiles (viscose fibres). The high DP and Cl of BC enhanced the spinnability in a viscose/BC blend, consequently improving the mechanical performance of the resulting fibres, as compared to neat viscose fibres.

The self-boosting ultrafast removal of Cr(VI) and organic dye in textile wastewater through sulfite-induced redox processes.

The treatment of textile wastewater containing harmful metal ions poses a significant challenge in industrial applications due to its environmental impact. In this study, the use of sulfite for treating simulated dye wastewater containing New Coccine (NC) and Cr(VI) was investigated. The removal of NC was influenced by the redox reaction between Cr(VI) and sulfite, demonstrating a strong self-boosting effect of Cr(VI) on NC removal. Remarkable NC decoloration (95%) and Cr(VI) reduction (90%) were achieved within 1 min, highlighting the effectiveness of the treatment. Quenching experiments and electron paramagnetic resonance (EPR) technology confirmed that singlet oxygen (1O2) was the main oxidative agent for organic dye removal and SO4•-, •OH and Cr(V) were also identified as key contributors to NC degradation. The Cr(VI)/sulfite system exhibited higher efficiency in degrading azo dyes, such as NC and Congo Red (CR), compared to non-azo dyes like Methylene Blue (MB). This superiority may be attributed to the action of Cr(V) on azo groups. Additionally, the COD removal experiments were conducted on the actual dye wastewater, showing the excellent performance of the Cr(VI)/Sulfite system in treating industrial textile wastewater. This approach presents a promising strategy for effective "waste control by waste", offering great potential for addressing challenges related to dye wastewater treatment and environmental pollution control in practical industrial scenarios.

Optimization studies on laccase activity of Proteus mirabilis isolated from treatment sludge of textile industry factories : Optimization of laccase activity of Proteus mirabilis.

Laccase is an exothermic enzyme with copper in its structure and has an important role in biodegradation by providing oxidation of phenolic compounds and aromatic amines and decomposing lignin. The aim of this study is to reach maximum laccase enzyme activity with minimum cost and energy through optimization studies of Proteusmirabilis isolated from treatment sludge of a textile factory. In order to increase the laccase enzyme activities of the isolates, medium and culture conditions were optimized with the study of carbon (Glucose, Fructose, Sodium Acetate, Carboxymethylcellulose, Xylose) and nitrogen sources (Potassium nitrate, Yeast Extract, Peptone From Soybean, Bacteriological Peptone), incubation time, pH, temperature and Copper(II) sulfate concentration then according to the results obtained. Response Surface Method (RSM) was performed on six different variables with three level. According to the data obtained from the RSM, the maximum laccase enzyme activity is reached at pH 7.77, temperature 30.03oC, 0.5 g/L CuSO4, 0.5 g/L fructose and 0.082 g/L yeast extract conditions. After all, the laccase activity increased 2.7 times. As a result, laccase activity of P. mirabilis can be increased by optimization studies. The information obtained as a result of the literature studies is that the laccase enzymes produced in laboratory and industrial scale are costly and their amounts are low. This study is important in terms of obtaining more laccase activity from P.mirabilis with less cost and energy.

Biodecolorization and biodegradation of Reactive Green 12 textile industry dye and their post-degradation phytotoxicity-genotoxicity assessments.

The employment of versatile bacterial strains for the efficient degradation of carcinogenic textile dyes is a sustainable technology of bioremediation for a neat, clean, and evergreen globe. The present study has explored the eco-friendly degradation of complex Reactive Green 12 azo dye to its non-toxic metabolites for safe disposal in an open environment. The bacterial degradation was performed with the variable concentrations (50, 100, 200, 400, and 500 mg/L) of Reactive Green 12 dye. The degradation and toxicity of the dye were validated by high-performance liquid chromatography, Fourier infrared spectroscopy analysis, and phytotoxicity and genotoxicity assay, respectively. The highest 97.8% decolorization was achieved within 12 h. Alternations in the peaks and retentions, thus, along with modifications in the functional groups and chemical bonds, confirmed the degradation of Reactive Green 12. The disappearance of a major peak at 1450 cm-1 corresponding to the -N=N- azo link validated the breaking of azo bonds and degradation of the parent dye. The 100% germination of Triticum aestivum seed and healthy growth of plants verified the lost toxicity of degraded dye. Moreover, the chromosomal aberration of Allium cepa root cell treatment also validated the removal of toxicity through bacterial degradation. Thereafter, for efficient degradation of textile dye, the bacterium is recommended for adaptation to the sustainable degradation of dye and wastewater for further application of degraded metabolites in crop irrigation for sustainable agriculture.

Progress in membrane distillation processes for dye wastewater treatment: A review.

Textile and cosmetic industries generate large amounts of dye effluents requiring treatment before discharge. This wastewater contains high levels of reactive dyes, low to none-biodegradable materials and chemical residues. Technically, dye wastewater is characterised by high chemical and biological oxygen demand. Biological, physical and pressure-driven membrane processes have been extensively used in textile wastewater treatment plants. However, these technologies are characterised by process complexity and are often costly. Also, process efficiency is not achieved in cost-effective biochemical and physical treatment processes. Membrane distillation (MD) emerged as a promising technology harnessing challenges faced by pressure-driven membrane processes. To ensure high cost-effectiveness, the MD can be operated by solar energy or low-grade waste heat. Herein, the MD purification of dye wastewater is comprehensively and yet concisely discussed. This involved research advancement in MD processes towards removal of dyes from industrial effluents. Also, challenges faced by this process with a specific focus on fouling are reviewed. Current literature mainly tested MD setups in the laboratory scale suggesting a deep need of further optimization of membrane and module designs in near future, especially for textile wastewater treatment. There is a need to deliver customized high-porosity hydrophobic membrane design with the appropriate thickness and module configuration to reduce concentration and temperature polarization (CP and TP). Also, energy loss should be minimized while increasing dye rejection and permeate flux. Although laboratory experiments remain pivotal in optimizing the MD process for treating dye wastewater, the nature of their time intensity poses a challenge. Given the multitude of parameters involved in MD process optimization, artificial intelligence (AI) methodologies present a promising avenue for assistance. Thus, AI-driven algorithms have the potential to enhance overall process efficiency, cutting down on time, fine-tuning parameters, and driving cost reductions. However, achieving an optimal balance between efficiency enhancements and financial outlays is a complex process. Finally, this paper suggests a research direction for the development of effective synthetic and natural dye removal from industrially discharged wastewater.

Discoloration of textile dyes by spent mushroom substrate of Agaricus bisporus.

The textile industry discharges up to 5 % of their dyes in aqueous effluents. Here, use of spent mushroom substrate (SMS) of commercial white button mushroom production and its aqueous extract, SMS tea, was assessed to remove textile dyes from water. A total of 30-90 % and 5-85 % of the dyes was removed after a 24 h incubation in SMS and SMS tea, respectively. Removal of malachite green and remazol brilliant blue R was similar in SMS and its tea. In contrast, removal of crystal violet, orange G, and rose bengal was higher in SMS, explained by sorption to SMS and by the role of non-water-extractable SMS components in discoloration. Heat-treating SMS and its tea, thereby inactivating enzymes, reduced dye removal to 8-58 % and 0-31 %, respectively, indicating that dyes are removed by both enzymatic and non-enzymatic activities. Together, SMS of white button mushroom production has high potential to treat textile-dye-polluted aqueous effluents.

Impact of cost sharing on quality improvement and profits under uncertain demand: The case of a textile and garment supply chain.

The study explores the strategic pricing and quality improvement decisions under uncertain demand in a three-layer textile and garment supply chain. According to whether the fabric manufacturer (FM) invests in quality or not and whether the garment manufacturer (GM) or garment retailer (GR) is willing to share the costs or not, five game models are constructed to investigate the impact of different members' cost sharing on the optimal decisions and profits. By conducting a theoretical and numerical analysis, we find that: (1) The GM's or GR's cost sharing plays a positive effect on the quality improvement, as for whose cost sharing performs better in improving the quality depending on the proportion of cost sharing, and the quality improvement is highest with both members share the costs simultaneously. (2) The FM receives the highest profit when both members share the costs simultaneously, however, whose cost sharing is more profitable for the FM is also related to the proportion of cost sharing; in short, the FM always benefits from the cost sharing, no matter one member does this or two members do this. (3) The GM (GR) gains the highest profit when only the GR (GM) shares the costs, and the results indicate that if one member has shared the costs, whether the other member engaging in cost sharing could benefit the former depending on their proportions. Specifically, when the GM (GR) chooses to share the costs and the proportion is relatively low, the GR(GM) joining in cost sharing is beneficial to the former; otherwise, is harmful.

NP, OP and Derivatives in Freshwater Sediment Downstream of Textile Associated Municipal Wastewater Discharges.

Alkylphenol ethoxylates comprise of many anthropogenic chemicals such as nonylphenol (NP), octylphenol (OP) and nonylphenol ethoxylates (NPEOs). The objectives of this study were to assess the frequency and magnitude of detections of 4-NP, OP and NPEOs in Canadian sediment downstream of textile associated municipal wastewater treatment plants (MWWTPs) to determine if regulatory actions have had a beneficial impact on the receiving environment. Surficial sediments were obtained in four locations in the province of Québec (Canada) and were analyzed for nonylphenol, nonylphenol monoethoxylates (NP1EO), nonylphenol diethoxylates (NP2EO) and octylphenol from 2015 to 2018. Individual concentrations of the compounds varied from non detect to 419 ng/g. Of the four compounds analyzed, NP was detected the most frequently with a 75% detection rate while OPs were not detected in any of the samples. Since the Canadian regulatory actions have drastically reduced NP/NPEOs usage in textile mill factories and manufactured products, the potential source of these compounds in sediment for this study could stem from the outfall from the MWWTPs but not related to textile mills as well as from the usage of these compounds as formulants in pesticide products. Lastly, there were no exceedances to the Canadian Sediment Quality guideline toxic equivalency approach (TEQ) of 1400 ng/g or the 1310 ng/g guideline for NP in freshwater sediment from the European Scientific Committee on Health, Environmental and Emerging Risks. We hypothesize that the significant concentrations of these compounds in sediment may be a relevant and continuous source of 4NP in surface waters due to resuspension of sediment in the water column.

Biosorption of chromium by live and dead cells of Bacillus nitratireducens isolated from textile effluent.

Bacillus nitratireducens was isolated from textile effluent and showed high tolerance to chromium (Cr), reaching up to a 1000 mg/L MIC value. This research was aimed at utilizing biosorbents from live and dead cells of B. nitratireducens to remove Cr from an aqueous solution. A batch biosorption test was performed, and mechanisms analysis was approached by an adsorption-desorption test, SEM-EDS, and FTIR analysis. Cr removal by dead cells in 25, 50, and 100 mg/L of Cr were 58.99 ± 0.7%, 69.8 ± 0.2%, and 82.87 ± 0.11%, respectively, while that by live cells was 73.08 ± 1.9%, 80.27 ± 6.33%, and 86.17 ± 1.93%, respectively. Live cells showed significantly higher Cr removal and adsorption capacities as compared to dead cells. In all concentrations, absorption contributed more than adsorption to the Cr removal by both live and dead cells. Absorption of Cr was subjected to occur due to passive mechanisms in dead cells while involving some active mechanisms in live cells. SEM-EDS confirmed the detection of Cr on the cell surface, while FTIR revealed the shifting of some peaks after the biosorption test, suggesting interactions between Cr and functional groups. Further TEM analysis is suggested to be conducted as a future approach to reveal the inner structure of cells and confirm the involvement of absorption mechanisms.

Hues of risk: investigating genotoxicity and environmental impacts of azo textile dyes.

The textile industry, with its extensive use of dyes and chemicals, stands out as a significant source of water pollution. Exposure to certain textile dyes, such as azo dyes and their breakdown products like aromatic amines, has been associated with health concerns like skin sensitization, allergic reactions, and even cancer in humans. Annually, the worldwide production of synthetic dyes approximates 7 × 107 tons, of which the textile industry accounts for over 10,000 tons. Inefficient dyeing procedures result in the discharge of 15-50% of azo dyes, which do not adequately bind to fibers, into wastewater. This review delves into the genotoxic impact of azo dyes, prevalent in the textile industry, on aquatic ecosystems and human health. Examining different families of textile dye which contain azo group in their structure such as Sudan I and Sudan III Sudan IV, Basic Red 51, Basic Violet 14, Disperse Yellow 7, Congo Red, Acid Red 26, and Acid Blue 113 reveals their carcinogenic potential, which may affect both industrial workers and aquatic life. Genotoxic and carcinogenic characteristics, chromosomal abnormalities, induced physiological and neurobehavioral changes, and disruptions to spermatogenesis are evident, underscoring the harmful effects of these dyes. The review calls for comprehensive investigations into the toxic profile of azo dyes, providing essential insights to safeguard the aquatic ecosystem and human well-being. The importance of effective effluent treatment systems is underscored to mitigate adverse impacts on agricultural lands, water resources, and the environment, particularly in regions heavily reliant on wastewater irrigation for food production.

Foreign outsourcing collaboration within a developing economy's perspective: A case of the Pakistani textile industry.

This paper develops an outsourcing collaboration model from a firm's perspective operating in a developing economy. The model considers that producers of the final goods residing in a developed country, and operators of manufacturing plants in a developing country collaborate with each other. The final goods producer supplies headquarter services for the production of intermediate goods in the developing country. The operators of manufacturing plants also supply their services in the domestic economy. This arrangement leads to foreign outsourcing collaborations (FOC) between firms of developed country and developing country. The operators of manufacturing plant maximize revenue subject to the cost constraint. The first order conditions suggests that an increase in wages of skilled labor, price of domestic inputs, and cost of production deter FOC. On the other hand, an increase in demand for and price of foreign headquarter services increases the FOC. Empirical analysis based on data collected from 217 clothing (textile and apparel) firms in the city of Faisalabad (Pakistan) reveals that an increase in wage to labor-productivity ratio reduces FOC. An improvement in skilled of the labor and foreign headquarter services give rise to FOC, whereas an increase in economies-of-scope enhances FOC. Additionally, an inverted U-shaped relationship is found between the cost of production and FOC, which shows that at the initial stage, the firm's cost of production increases with an increase in the level of FOC, but soon after the tipping point, the firm's cost starts decreasing with a further increase in FOC.

Efficacy and mechanism of enhanced Sb(V) removal from textile wastewater using ferric flocs in aerobic biological treatment.

Antimony contamination from textile industries has been a global environmental concern and the existing treatment technologies could not reduce Sb(V) to meet the discharge standards. To overcome this shortcoming, ferric flocs were introduced to expedite the biological process for enhanced Sb(V) removal in wastewater treatment plant (WWTP). For this purpose, a series of laboratorial-scale sequential batch reactor activated sludge processes (SBRs) were applied for Sb(V) removal with varied reactor conditions and the transformation of Fe and Sb in SBR system was investigated. Results showed a significant improvement in Sb(V) removal and the 20 mg L-1 d-1 iron ions dosage and iron loss rate was found to be only 15.2%. The influent Sb(V) concentration ranging 153-612 µg L-1 was reduced to below 50 µg L-1, and the maximum Sb(V) removal rate of the enhanced system reached about 94.3%. Furthermore, it exhibited high stability of Sb(V) removal in the face of antimonate load, Fe strike and matrix change of wastewater. Sludge total Sb determination and capacity calculation revealed decreasing in Sb adsorption capacity and desorption without fresh Fe dosage. While sludge morphology analysis demonstrated the aging and crystallization of iron hydroxides. These results verify the distinct effects of fresh iron addition and iron aging on Sb(V) removal. High-throughput gene pyrosequencing results showed that the iron addition changed microbial mechanisms and effect Fe oxidized bacterial quantity, indicating Sb(V) immobilization achieved by microbial synergistic iron oxidation. The present study successfully established a simple and efficient method for Sb(V) removal during biological treatment, and the modification of biological process by iron supplement could provide insights for real textile wastewater treatment.

Microalgal and activated sludge processing for biodegradation of textile dyes.

The textile industry contributes substantially to water pollution. To investigate bioremediation of dye-containing wastewater, the decolorization and biotransformation of three textile azo dyes, Red HE8B, Reactive Green 27, and Acid Blue 29, were considered using an integrated remediation approach involving the microalga Chlamydomonas mexicana and activated sludge (ACS). At a 5 mg L-1 dye concentration, using C. mexicana and ACS alone, decolorization percentages of 39%-64% and 52%-54%, respectively, were obtained. In comparison, decolorization percentages of 75%-79% were obtained using a consortium of C. mexicana and ACS. The same trend was observed for the decolorization of dyes at higher concentrations, but the potential for decolorization was low. The toxic azo dyes adversely affect the growth of microalgae and at high concentration 50 mg L-1 the growth rate inhibited to 50-60% as compared to the control. The natural textile wastewater was also treated with the same pattern and got promising results of decolorization (90%). Moreover, the removal of BOD (82%), COD (72%), TN (64%), and TP (63%) was observed with the consortium. The HPLC and GC-MS confirm dye biotransformation, revealing the emergence of new peaks and the generation of multiple metabolites with more superficial structures, such as N-hydroxy-aniline, naphthalene-1-ol, and sodium hydroxy naphthalene. This analysis demonstrates the potential of the C. mexicana and ACS consortium for efficient, eco-friendly bioremediation of textile azo dyes.

Performance of a high-rate membrane bioreactor for energy-efficient treatment of textile wastewater.

High-rate membrane bioreactors (MBR), where the wastewater undergoes partial oxidation due to the applied short sludge retention time (SRT) and hydraulic retention time (HRT) values, retain the majority of the organic substances in the sludge through growth and biological flocculation. Thus, a raw material source with a high biomethane production potential is created for the widespread use of circular economy or energy-neutral plants in wastewater treatment. While high-rate MBRs have been successfully employed for energy-efficient treatment of domestic wastewater, there is a lack of research specifically focused on textile wastewater. This study aimed to investigate the textile wastewater treatment and organic matter recovery performances of an aerobic MBR system containing a hollow fiber ultrafiltration membrane with a 0.04 µm pore diameter. The system was initially operated at short SRTs (5 and 3 d) and different SRT/HRT ratios (5, 10, and 20) and subsequently at high-rate conditions (SRT of 0.5-2 d and HRT of 1.2-9.6 h) which are believed to be the most limiting conditions tested for treatment of real textile wastewater. The results showed that chemical oxygen demand (COD) removal averaged 77% even at SRT of 0.5 d and HRT of 1.2 h. Slowly biodegradable substrates and soluble microbial products (SMP) accumulated within the MBR at SRT of 0.5 and 1 d, which resulted in decreased sludge filterability. The observed sludge yield (Yobs) exhibited a considerable increase when SRT was reduced from 5 to 1 d. On the other hand, the SRT/HRT ratio displayed a decisive effect on the energy requirement for aeration.

Life cycle assessment applications to reuse, recycling and circular practices for textiles: A review.

To understand which are the best strategies for textile waste management and to analyse the effects on the environment of applying circular economy practices to textile products, a review of 45 publications where life cycle assessment (LCA) is applied to these topics has been carried out. The separate collection of textiles, followed by reuse and recycling brings relevant environmental benefits, with impacts related to reuse resulting lower than those of recycling. At the opposite, when mixed municipal solid waste is addressed to energy recovery, the textile fraction is the second most impacting on climate change, right after plastics, while for landfill disposal impacts textiles directly follow the more biodegradable fractions. Textiles manufacturing using recycled fibres generally gives lower impacts than using virgin ones, with a few exceptions in some impact categories for cotton and polyester. The circular practices with the lowest impacts are those that ensure the extension of the textiles service life. Another aim of this review is to identify the main variables affecting the life cycle impact assessment (LCIA). These resulted to be the yield and material demand of recycling processes, the use phase variables, the assumptions on virgin production replaced by reuse or recycling, the substitution factor in reuse, and transportation data in business models based on sharing. Thus, in LCA modelling, great attention should be paid to these variables. Future research should address these aspects, to acquire more relevant data, based on industrial-scale processes and on people habits towards the circular economy strategies applied to textiles.