Onset and progression of dental erosion in a mouse model.

OBJECTIVE: Purpose of this research was to examine the onset, progression and wear rates of dental erosion in an established mouse model. MATERIAL AND METHODS: Dental erosion in mice was experimentally induced, and the acidic effects of cola drink on their teeth after 2, 4 and 6-weeks were closely analysed by scanning electron microscopy. The tooth height and enamel or dentin loss were established.  Results: The dental erosion on the molars showed clear progression from 2 to 6 weeks. By the 2-week mark, a significant portion of enamel was already eroded, revealing the dentin on the lingual cusps. When adjusted for attritional wear, molars exposed to cola for 2 weeks showed a 35% drop in lingual tooth height compared to controls (533 µm vs. 818 µm). At 4 and 6 weeks, the cola-exposed group continued to display decreased lingual tooth heights by 40% (476 µm vs. 799 µm) and 43% (440 µm vs. 767 µm), respectively. CONCLUSION: This study revealed significant acidic effects of cola drink on mouse molars as early as 2 weeks. These findings highlight the challenge of monitoring dental erosion clinically and underscore the importance of early preventive and intervention measures.

Prevalence of Dental Erosive Wear and Possible Risk Factors among Adolescents and Adults in Poland - A National Survey.

PURPOSE: To investigate the prevalence and severity of erosive tooth wear (ETW) and evaluate the determinants of ETW among adolescents and adults in Poland. MATERIALS AND METHODS: The study covered three age groups of patients: 15 years old, 18 years old, and adults aged 35-44 years. Calibrated examiners measured ETW according to the Basic Erosive Wear Examination (BEWE) scoring system in 6091 patients. The clinical examination of patients was preceded by a socio-medical study based on a questionnaire consisting of items identifying potential risk factors for ETW. RESULTS: In all age groups, erosive lesions were most common in the form of initial enamel damage; more advanced lesions (BEWE 2 and 3) were rarely observed among 15-year-olds, while in the group of older adolescents and adults, the percentages were 13% and 20%, respectively. Acidic diet, gender, level of education, and medical conditions were statistically significantly associated with ETW in the examined population. The analysis showed that, depending on age, multiple and statistically significant risk factors for ETW become most apparent in the 35-44 age group, especially with regard to general health. This suggests that the long-term impact of factors and their cumulative effects are critical to the development of ETW. CONCLUSIONS: This is the first large, representative study of ETW in Central and Eastern Europe among adolescents and adults, which indicates the relatively rare occurrence and severity of erosive lesions. The present findings support other longitudinal studies supporting the use of the BEWE system as a valuable standard for assessing erosive lesions and related risk factors among different populations at different ages.

Dental care staff's experience with risk assessment of dental erosion: a qualitative study.

BACKGROUND: The risk assessment of dental erosion among children and adolescents is an important aspect of dental care, as dental erosion constitutes a rapidly growing, global problem. Dental professionals rely solely on their own perception, as the current risk assessment process is not completely automatized, which affects the risk assessment reliability. AIM: To explore dental professionals' experiences with risk assessment of dental erosion among children and adolescents. METHOD: In-depth interview was used as data collection method. A total of 11 dental professionals were interviewed. The interviews were analyzed using qualitative content analysis. RESULTS: The findings were summarized in the categories Professionals' responsibility, Systematic approach , and Collaboration and communication. Dental staff perceived that their basic knowledge regarding erosion should be improved, and skills development was desired to reduce the knowledge gaps around the risk assessment of dental erosion. They alleged that the systematic approach could be improved by reducing workplace stress, implementing a universal dental erosion index, improving the existing risk assessment software, and automating the risk assessment of the condition. Dental professionals also experienced a need to calibrate and collaborate with each other and with other healthcare professionals to improve patient care. CONCLUSION: Dental professionals experienced their basic knowledge of dental erosion and their risk assessment as good, but a more advanced skill development was required. Furthermore, they experienced the risk assessment software as a good tool that should be improved to compile more objective risk assessment. A universal erosion index was also requested.

The effect of final irrigation with different solutions on smear layer removal and dentin erosion: A scanning electron microscope study.

AIM: This study aimed to compare the effectiveness of initial irrigation with sodium hypochlorite (NaOCl) and final irrigation with QMix, 40% citric acid, and 17% ethylenediaminetetraacetic acid (EDTA) on smear layer removal and dentin erosion. METHODOLOGY: Forty extracted human mandibular premolar teeth were randomly divided into four groups (n = 10) according to the type of final irrigants used: 17% EDTA, QMix, citric acid, and control (normal saline). Canals were mechanically prepared using ProTaper Next instruments to an apical size of X3. Subsequently, the roots were sectioned in a buccolingual direction. Scanning electron microscopy (SEM) was used to assess the presence of the smear layer and the amount of dentin erosion in the coronal, middle, and apical thirds of the root canals. RESULTS: In regards to smear layer removal, there was a significant difference between the control group and the other tested groups. Moreover, it was significantly higher in the coronal and middle thirds than in the apical third. However, there were no significant differences between the groups of EDTA, QMix, and citric acid. Concerning dentin erosion, citric acid produced significantly more dentin erosion than the other tested groups. CONCLUSION: Final irrigation with solutions had a higher ability to remove the smear layer in the coronal and middle thirds compared to the apical third. Of all the solutions tested, 40% citric acid had the most pronounced impact on dentin erosion, followed by 17% EDTA and QMix.

EFFECT OF LASER IRRADIATION ASSOCIATED WITH FLUORIDE IN DECREASING EROSIVE TOOTH WEAR: A SYSTEMATIC REVIEW WITH A NETWORK META-ANALYSIS  .

OBJECTIVE: The present systematic review with a network meta-analysis (NMA) aimed to evaluate the effect of high-power lasers, associated or not with fluoride compounds, to control and prevent Erosive Tooth Wear (ETW). METHODS: The review was registered in the PROSPERO (CRD42021242547) and followed the PICO question: P (population): enamel and dentin substrate; I (Intervention): high-power laser irradiation, associated or not with fluoride compounds; C (Control): no-treatment; and O (Outcomes): prevention/control of ETW. The electronic databases PubMed, Scopus, and EMBASE were searched. Two independent reviewers evaluated in vitro and in situ studies. The risk of bias was assessed using the RoBDEMAT tool. The estimated treatment effect derived from direct and indirect comparisons were analyzed and the difference between these effects was calculated based on the data of enamel and dentin surface loss (in µm). RESULTS: A total of 179 studies were retrieved and after the exclusion of duplicates, 103 studies had their titles and abstracts evaluated. Thirty-nine studies had their full text analyzed for data extraction (Cohen Kappa = 0.88). For sound enamel, the laser irradiation (L), fluoride application (F) and, the association of treatments (L + F) promoted higher protection than No-Treatment (NT). For eroded enamel, L + F and F did not differ, but both treatments reduced surface loss compared to NT and L. For sound and eroded dentin, treatments with laser increased surface loss. CONCLUSIONS: Although a high-power laser has some potential to prevent erosive tooth wear, this effect is not better than that of standard fluoride. The use of laser in the management of dentin erosive wear can be harmful.

Silver diamine fluoride in preventing enamel erosion: An in vitro study with salivary pellicle.

OBJECTIVES: To compare the prevention of enamel erosion and discolouring effect with a single and two weekly topical applications of silver diamine fluoride (SDF) solution. METHODS: Human enamel blocks were divided into four groups. Group 1 (SDF2) received two weekly applications of SDF solution (Advantage Arrest: 260,000 ppm Ag, 44,300 ppm F, pH 9.1). Group 2 (SDF1) received a single application of SDF solution. Group 3 (SNF, Positive Control) received daily application of stannous-chloride/amine-fluoride/sodium-fluoride solution (Elmex® Enamel professional: 800 ppm Sn(II), 500 ppm F, pH 4.5). Group 4 (DW, Negative Control) received daily application of deionised water. The treated blocks were subjected to a 14-day erosive challenge. Crystal characteristics, elemental composition, surface morphology, percentage of surface microhardness loss (%SMHL), surface loss, and total colour change (ΔE) of the blocks were investigated using X-ray diffraction (XRD), energy-dispersive spectrometry (EDS) and scanning electron microscopy (SEM), Vickers' hardness testing, non-contact profilometry, and digital spectrophotometry, respectively. RESULTS: XRD and EDS revealed precipitates of silver for SDF2 and SDF1 and tin for SNF. SEM showed prominent etched enamel pattern on DW than the other three groups. The%SMHL (%) of SDF2, SDF1, SNF, and DW were 26.6 ± 2.9, 33.6 ± 2.8, 38.9 ± 2.9, and 50.5 ± 2.8 (SDF2SDF1=SNF>DW, p < 0.05). CONCLUSION: Two weekly applications was more effective than a single application of SDF in preventing enamel erosion, though it caused more discolouration. CLINICAL SIGNIFICANCE: Topical application of 38 % SDF with two weekly applications protocol is effective in preventing enamel erosion.

Can the combination of proanthocyanidin and vitamin E or palm oil effectively protect enamel against in vitro erosive and abrasive challenges?

OBJECTIVES: This study aimed to assess the effect of proanthocyanidin, palm oil and vitamin E against erosive and erosive+abrasive challenges in vitro after enamel pellicle formation in situ. METHODOLOGY: Bovine enamel blocks (n=84) were obtained and divided into the following treatment groups: negative control (NC) - deionized water; positive control (PC) - SnCl2/NaF/AmF-containing solution; palm oil (PO); 2% proanthocyanidin (P2); vitamin E (VitE); 2% proanthocyanidin+palm oil (P2PO); and 2% proanthocyanidin+vitamin E (P2VitE). For 5 days, one half of the sample from each group was subjected to erosion and the other half was subjected to erosion+abrasion. The acquired enamel pellicle (AEP) was pre-formed in situ for 30 minutes. The specimens were then treated in vitro with solutions (500 µl, 30s for each group). Subsequently, the blocks were left in the oral cavity for another hour to obtain the modified AEP. The blocks were immersed in 0.5% citric acid (pH=2.5) for 90s, 4×/day. AEP formation and treatment were carried out before the first and third erosive challenges, and after these challenges, abrasive cycles (15s) were performed on half of the samples. Enamel wear was quantified by profilometry and data were analyzed by two-way ANOVA and Tukey's test (p<0.05). RESULTS: All groups showed higher wear when exposed to erosion+abrasion than when exposed to erosion alone (p=0.0001). PO, P2VitE, P2, and P2PO showed enamel wear similar to the PC group, but only PC, PO and P2VitE differed from the NC group. The other groups behaved similarly to NC. CONCLUSION: It was concluded that the combination of proanthocyanidin and vitamin E was effective in reducing wear in the face of in vitro erosive and erosive+abrasive challenges.

Experimental toothpastes containing ß-TCP nanoparticles functionalized with fluoride and tin to prevent Erosive Tooth Wear.

OBJECTIVES: The present study aimed to synthesize toothpastes containing Beta- TriCalcium Phosphate (ß-TCP) nanoparticles, functionalized with fluoride and tin, and test their ability to reduce erosive tooth wear (ETW). METHODS: Toothpastes were synthesized with the following active ingredients: 1100 ppm of fluoride (as sodium fluoride, F-), 3500 ppm of tin (as stannous chloride, Sn2+), and 800 ppm of ß-TCP (Sizes a - 20 nm; and b - 100 nm). Enamel specimens were randomly assigned into the following groups (n = 10): 1. Commercial toothpaste; 2. Placebo; 3 F-; 4. F- + ß-TCPa; 5. F- + ß-TCPb; 6. F- + Sn2+; 7. F- + Sn2+ + ß-TCPa and 8. F- + Sn2+ + ß-TCPb. Specimens were subjected to erosion-abrasion cycling. Surface loss (in µm) was measured by optical profilometry. Toothpastes pH and available F- were also assessed. RESULTS: Brushing with placebo toothpaste resulted in higher surface loss than brushing with F- (p = 0.005) and F- + ß-TCPb (p = 0.007); however, there was no difference between F- and F- + ß-TCPb (p = 1.00). Commercial toothpaste showed no difference from Placebo (p = 0.279). The groups F-, F- + ß-TCPa, F- + ß-TCPb, F- + Sn2+, F- + Sn2+ + ß-TCPa and F- + Sn2+ + ß-TCPb were not different from the commercial toothpaste (p > 0.05). Overall, the addition of ß-TCP reduced the amount of available fluoride in the experimental toothpastes. The pH of toothpastes ranged from 4.97 to 6.49. CONCLUSIONS: Although toothpaste containing ß-TCP nanoparticles protected enamel against dental erosion-abrasion, this effect was not superior to the standard fluoride toothpaste (commercial). In addition, the functionalization of ß-TCP nanoparticles with fluoride and tin did not enhance their protective effect. CLINICAL SIGNIFICANCE: Although ß-TCP nanoparticles have some potential to control Erosive Tooth Wear, their incorporation into an experimental toothpaste appears to have a protective effect that is similar to a commercial fluoride toothpaste.

Impact of acidic beverages on composition and surface characteristics of human teeth: scanning electron microscopic, stereomicroscopic and energy dispersive x-ray analyses.

OBJECTIVES: The objective of this study was to evaluate the effect of acidic beverages on the surface topography and elemental composition of human teeth. METHODS: A total of five highly acidic beverages (Red Bull, Pepsi, Apple Cidra, Tang Mosambi, and Tang Orange) were investigated. The tooth specimens of experimental groups were submerged in each beverage and incubated at 37 °C for 7 days, whereas, the tooth specimens of control groups were placed in distilled water. Afterwards, tooth specimens were analyzed using scanning electron microscopic (SEM), stereomicroscopic, and energy dispersive x-ray (EDX) techniques. RESULTS: All experimental groups revealed a decline in the tooth elements compared to controls, however, such decline was not statistically significant. Nevertheless, comparing the experimental groups, the Red Bull beverage caused a marked reduction in the percentage of both calcium and phosphorus elements compared to the Pepsi, Apple Cidra, Tang Mosambi, and Tang Orange beverages but it was insignificant as well in contrast to its control counterpart. All five acidic beverages demonstrated erosive potential under SEM analysis; however, each group of specimens showed a diverse amount of demineralization. In addition, all experimental groups exhibited significant discoloration of tooth specimens compared to their respective control counterparts. CONCLUSIONS: Within the limitations of study, all five acidic beverages demonstrated erosive potential in the simulated in vitro conditions under SEM analysis; however, each group of specimens exhibited a different extent of demineralization. In addition, the overall effect of all beverages was insignificant under EDX analysis as no substantial difference was revealed between the elemental composition of experimental and control group specimens.

Dentin erosive wear is reduced by fluoride varnishes containing nanosized sodium trimetaphosphate in vitro.

This study evaluated the effect of fluoride varnishes containing micrometric or nanosized sodium trimetaphosphate (TMP) on dentin erosive wear in vitro. Bovine root dentin blocks were selected by surface hardness and randomly divided into five experimental groups/varnishes (n = 20/group): placebo, 5% sodium fluoride (NaF); 5% NaF+5% micrometric TMP; 5% NaF+2.5% nanosized TMP; and 5% NaF+5% nanosized TMP. Half of the surface of all blocks received a single application of the assigned varnish, with subsequent immersion in artificial saliva for 6 h. Varnishes were then removed and the blocks were immersed in citric acid (90 s, 4×/day, 5 days). After each erosive cycle, ten blocks of each group were immersed in a placebo dentifrice for 15 s (ERO), while the other ten blocks were subjected to abrasion by brushing (ERO+ABR). Dentin erosive wear was assessed by profilometry. Data were submitted to 2-way ANOVA and to the Holm-Sidak test (p<0.05). Dentin erosive wear was significantly higher for ERO+ABR than for ERO for all varnishes. TMP-containing varnishes promoted superior effects against dentin erosive wear compared with 5% NaF alone; and 5% nanosized TMP led to the lowest wear among all varnishes. In conclusion, the addition of TMP to conventional fluoride varnish (i.e., varnish containing only NaF) enhanced its protective effects against bovine root dentin erosion and erosion+abrasion. Additionally, the use of 5% nanosized TMP led to superior effects in comparison to 5% micrometric TMP, both for erosion and erosion+abrasion in vitro.

Hard drugs use and tooth wear: a scoping review.

OBJECTIVES: This study aims to map evidence on the relationship between hard drug use and dental wear. The scoping review is guided by the question: What is the relationship between hard drug consumption and dental wear? MATERIALS AND METHODS: Adhering to PRISMA-ScR guidelines, searches were conducted across PubMed, Embase, and four databases in March 2024. Inclusion criteria included studies investigating the association between hard drug use and dental wear, regardless of publication date or language. Data were presented through narrative exposition, tables, and a conceptual framework. RESULTS: Twenty-eight studies (four case-control, three cross-sectional, five case reports, and sixteen literature reviews) were included. Among case-control studies, 75% observed an association between drug use and dental erosion; however, no cross-sectional studies demonstrated this association. Despite questionable quality, reviews established connections between drug use and dental erosion. Studies aimed to elucidate potential causes for dental erosion. CONCLUSIONS: Analysis suggests a potential link between hard drug use and dental wear, though indirect. Factors like bruxism and reduced salivary pH may contribute to dental wear among drug users. Further investigation through primary studies exploring this relationship is necessary. CLINICAL RELEVANCE: Dentists should focus not only on clinical characteristics of dental wear but also on mediating factors such as bruxism and decreased salivary pH associated with drug use. This holistic approach allows for a deeper understanding of dental wear mechanisms, enabling targeted preventive and therapeutic interventions.

Development and effect of orodispersible film incorporated with Biosilicate for remineralization of dental enamel subjected to cariogenic and erosive challenge.

OBJECTIVES: The objective of this in vitro study was to assess the efficiency of incorporating Biosilicate particles (30 and 50 mg) into an experimental orodispersible film and its efficacy in the remineralization process of bovine dental enamel under cariogenic and erosive challenges. METHODS: Ninety-nine intact incisors, devoid of cracks or fractures, yielding 198 samples (6 × 6 × 2 mm) via vestibular sectioning using a low-speed diamond disc under water cooling. After flattening the enamel surface with 600, 1200, and 2000 grit sandpaper, the samples were divided into two groups based on the challenges they underwent: cariogenic (0.1 M lactic acid at pH 5.0) or erosive (0.05 M citric acid solution at pH 2.3). Samples from each challenge were further categorized into 11 groups (n = 9) according to the duration of cariogenic (3, 7, and 14 days) or erosive (3, 7, and 10 days) challenge, along with positive control groups (fragments untreated with challenges and treated with different Biosilicate concentrations) and negative controls (fragments treated with artificial saliva for the same periods established for cariogenic and erosive challenges). Treatments with orodispersible films containing Biosilicate (30 and 50 mg) were administered for 2 min per day for 15 days. RESULTS: The highest remineralizing potential was observed in samples treated with Biosilicate after 14 days of cariogenic challenge, irrespective of the concentration tested. For samples subjected to erosive challenge, erosion time did not affect Biosilicate's remineralizing potential. CONCLUSION: Biosilicate shows promise in terms of remineralizing potential in enamel subjected to cariogenic challenge due to its ability to form hydroxycarbonapatite in mineralized tissues.

Prevalence of erosive tooth wear and associated risk factors in Colombian adolescents.

Accurate determination of the prevalence of erosive tooth wear (ETW) and associated risk factors in adolescents can inform clinical management guidelines. The aim of this analytical cross-sectional study was to estimate the prevalence, severity, and risk factors of ETW in adolescents aged 12-15 years in the municipality of Usaquén in Bogotá, Colombia. Two calibrated examiners clinically assessed ETW using Basic Erosive Wear Examination (BEWE) Index (range: 0-3). All tooth surfaces (excluding proximal) were scored to allow estimation of the Highest (0-3) and Total BEWE (sum of Highest BEWE score per sextant: 0-18) scores per patient. Sociodemographic characteristics, ETW risk factors, and caries severity (ICDAS-epi-merged) were evaluated, and their association with the presence of ETW (indicated by a Highest BEWE score of 2-3) was examined using preliminary analyses and logistic regression models. The study sample included 454 adolescents (mean age: 13.5±1.1 years; female: 61.7%), and the prevalence of ETW was 71.6%. The majority of participants exhibited a Highest BEWE score of 3 (58.0%) and a Total BEWE score ≤8 (84.3%). The preliminary analysis showed an association between the presence of ETW and age, caries, and brushing teeth before eating (p-value < 0.05). Risk factors for ETW included always brushing teeth before eating [adjusted Prevalence Ratio (PRa) 1.31, p-value=0.014], presence of extensive carious lesions (PRa 1.23, p-value = 0.024), male gender (PRa 1.14, p-value = 0.028), and age > 14 years (PRa 1.17, p-value = 0.009). Although ETW was highly prevalent, most Colombian adolescents exhibited low Total BEWE scores. ETW was associated with frequent fruit intake, age, toothbrushing habits, caries lesions, and sex.

Effect of erosive conditions on different sealant materials used in paediatric dentistry.

To evaluate the effect of acidic challenge on erosion depth and topographic characteristics of different materials used as occlusal sealants. Two hundred specimens of five sealant materials (Fuji IX, Ketac Molar, Fuji II, Equia and Clinpro) and forty bovine teeth enamel samples (control) were prepared and exposed to acidic challenge. The specimens were immersed in four different solutions (orange juice, coke drink, citric acid or distilled water) under mildly shaken conditions for 3 days. The erosion depth profiles were measured using a profilometer and Scanning Electron Microscope (SEM). Two-way ANOVA with Tukey post-hoc test was performed to evaluate the interactions. Sealant material and acidic challenge had significant effects on erosion depth. Among the materials, Fuji II presented the highest mean of erosion depth after immersion in orange juice, coke drink, and citric acid. All materials groups presented higher erosion depth values after immersion in the citric acid solution, except Clinpro. Bovine enamel presented higher erosion depth values compared to all materials when submitted to erosive challenge. Sealant materials submitted to the acidic challenge presented different degrees of erosion and topographic modification; however, they are less susceptible to erosion than bovine teeth enamel.

Risk factors for noncarious cervical lesions: A case-control study.

OBJECTIVES: Noncarious cervical lesions (NCCLs) are multifactorial and can be caused by the anatomical structure of the teeth, erosion, abrasion and abnormal occlusion. The aim of this case-control study was to explore the risk factors for NCCLs. METHODS: Cone-beam computed tomography was used to determine whether a wedge-shaped defect existed at the cementoenamel junction. We compared 63 participants with NCCLs with 63 controls without NCCLs, matched for sex, age (±1 year) and toothbrushing-related factors (e.g., type of bristle and brushing patterns, frequency and strength). All participants were asked to complete a questionnaire about self-administered daily diet habits and health condition. Univariate and multivariate logistic regression analyses were conducted to determine the risk factors for NCCLs. RESULTS: Significant variables in the univariate analysis (i.e., p < .2) included frequency of carbonated beverage consumption, sella-nasion-point B angle (SNB) and Frankfort-mandibular plane angle (FMA). Multivariate logistic regression demonstrated that the consumption frequency of carbonated beverages (odds ratio [OR] = 3.147; 95% confidence interval [CI], 1.039-9.532), FMA (OR = 1.100; 95% CI, 1.004-1.204) and SNB (OR = 0.896; 95% CI, 0.813-0.988) was independent influencing factors. The area under the receiver operating characteristic curve (AUC) value of regression Model 1 (established with the frequency of carbonated beverage consumption, FMA, SNB and sleep bruxism) was 0.700 (95% CI, 0.607-0.792; p < .001), and that of regression Model 2 (established using the frequency of carbonated beverage consumption, FMA and SNB) was 0.704 (95% CI, 0.612-0.796; p < .001). CONCLUSIONS: The consumption frequency of carbonated beverages and FMA was risk factors for NCCLs; the higher the frequency of carbonated beverage consumption and FMA, the higher was the probability of NCCLs. SNB was a protective factor for NCCL occurrence; the larger the SNB, the lower was the probability of NCCL occurrence. These findings have further clarified the aetiology of NCCLs and provided clinicians with valuable insights into strategies for preventing the loss of dental tissue.

Protecting primary teeth from dental erosion through bioactive glass.

OBJECTIVES: The present study aimed to evaluate the effectiveness of bioactive glass (BAG) in preventing dental erosion in primary teeth. METHODS: Enamel and dentin specimens (2 × 2 × 2 mm) were obtained from extracted primary teeth, which were randomly divided into the following groups based on the pretreatments (n = 12): DW (deionized water), NaF (2 % sodium fluoride), 2BAG (2 % BAG), 4BAG (4 % BAG), 6BAG (6 % BAG), and 8BAG (8 % BAG). The specimens were immersed in the respective solutions for 2 min and subjected to in vitro erosive challenges (4 × 5 min/d) for 5 d. The erosive enamel loss (EEL), erosive dentin loss (EDL), and the thickness of the demineralized organic matrix (DOM) were measured using a contact profilometer. The surface microhardness (SMH) was measured, and the percentage of SMH loss (%SMHL) was calculated. The surface morphology and mineral composition were evaluated by scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS), respectively. RESULTS: After the erosive challenges, the EEL, EDL, and%SMHL of the 2BAG, 4BAG, 6BAG, and 8BAG groups significantly reduced, with the greatest reduction was observed in the 6BAG (EEL: 6.5 ± 0.2 µm;%SMHL in enamel: 12.8 ± 2.6; EDL: 7.9 ± 0.3 µm; %SMHL in dentin: 22.1 ± 2.7) and 8BAG groups (EEL: 6.4 ± 0.4 µm;%SMHL in enamel: 11.0 ± 1.9; EDL: 7.8 ± 0.5 µm; %SMHL in dentin: 22.0 ± 2.5) (P < 0.05). With increasing BAG concentrations, the number of surface deposits containing Ca, P, and Si increased. CONCLUSIONS: 6BAG was the most effective for preventing dental erosion in primary teeth and showed a particularly strong potential for dentin erosion prevention. CLINICAL SIGNIFICANCE: Bioactive glass, especially at a 6 % concentration, has proven effective in reducing erosive tooth wear and surface microhardness loss while also protecting demineralized organic matrix in primary dentin.

Practical training using BEWE aimed at improving the diagnosis ability of erosive tooth wear for dental students-A randomized trial.

INTRODUCTION: Erosive tooth wear (ETW) has been gaining attention due to its high prevalence. However, ETW clinical diagnosis is difficult and may go unnoticed by many professionals. The present study aimed to develop, implement and evaluate a theoretical-practical training using active methodologies in the development of undergraduate students' skills for the diagnosis of ETW compared to the traditional teaching method. MATERIALS AND METHODS: This randomized controlled study involved two parallel groups: control group (n = 22), with learning based only on theoretical content and test group (n = 24), learning by theoretical-practical activity mediated by monitors/tutors. The theoretical class covered the current concepts of ETW, aetiology, diagnosis, use of the BEWE index, prevention and treatment. The practical training included exercises and discussions based on the diagnosis using BEWE scores of a collection of images and extracted teeth. To evaluate the efficacy of the teaching-learning methods, a theoretical multiple-choice questionnaire and a practical test using images and extracted teeth were applied. The outcome was the number of correct answers. Groups were compared by Mann-Whitney (theoretical knowledge) and T tests (practical ability in diagnosis) (p < .05). RESULTS: There was no significant difference between groups in the theoretical evaluation (p = .866). The test group showed higher ability to diagnose ETW lesions compared to the control group in the practical tests (p = .001). The performance of ETW diagnosis was similar when images were used in comparison to extracted teeth (p = .570). CONCLUSION: The practical activity associated with theoretical classes can be a promising strategy to improve the development of undergraduate students' skills in the diagnosis of ETW.

Erosion protective properties of the enamel pellicle in-situ.

OBJECTIVES: Previous studies on short- and long-term pellicles showed that the enamel pellicle provides partial protection against erosion. The aim of the present study was to investigate the protective properties of clinically relevant pellicles formed within 2 to 24 h. The hypothesis was that factors such as pellicle formation time, intraoral location, and acidic challenge severity would not influence the erosion-protective properties of the pellicle. METHODS: Six subjects participated in the study. Bovine enamel specimens were prepared and intraorally exposed at buccal or palatal sites for 2, 6, 12, and 24 h to allow pellicle formation, followed by erosion using 0.1 % or 1 % citric acid. Calcium release and surface microhardness were measured, and specimens were analysed using scanning and transmission electron microscopy. Quantitative data were statistically analysed with three-way ANOVA and Tuckey's multiple comparison test (p = 0.05). RESULTS: Pellicle formation time and intraoral location did not significantly influence the erosion-protective properties of the pellicle, while citric acid concentration significantly affected enamel erosion. The pellicle thickness increased with longer formation times and on buccal sites, but decreased or was entirely removed following treatment with 0.1 % or 1 % citric acid, respectively. The enamel surface exhibited a characteristic erosion pattern. CONCLUSIONS: This study underscores the importance of investigating pellicle properties within the critical 2- to 24-h timeframe and highlights the significance of pellicle thickness in acid resistance. CLINICAL SIGNIFICANCE: These findings provide valuable insights into the factors influencing the protective properties of enamel pellicles and could guide preventive measures in dental practice.

Oral Health Status of Workers in Acid Exposure Environments in Japan: A Cross-sectional Study.

Although the working environment may play a role in dental acid erosion, few studies have been conducted on this in Japanese workers in recent years. The purpose of this study was to investigate oral health status, including dental erosion, in workers who may have been exposed to an acidic environment. The study participants were recruited by an online research company. Oral examinations and questionnaire surveys were conducted on this cohort in January 2023. A total of 144 participants were finally included. Workers exposed to an acidic environment showed more use of protective equipment and underwent more dental examinations at the workplace (p<0.001). Possible dental erosion was observed in only 3 out of the total of 144 participants (2.1%), however. No significant difference was observed in the number of teeth, caries experience, or dental erosion according to the number of years of acid exposure in the workplace. The results of this study suggest that acid exposure exerts a relatively small effect on the oral health status of workers in Japan.

[Risk analysis Erosive Tooth Wear (ETW): checklist for a quick assessment of the risk factors for ETW in the dental practice]. / Risikoanalyse Erosive Tooth Wear (ETW): Checkliste zur schnellen Bewertung der Risikofaktoren für ETW in der Zahnarztpraxis.

Erosive Tooth Wear (ETW) is the loss of tooth structure without bacterial involvement. As the resulting loss of tooth structure is irreversible, an early evaluation of the multifactorial etiology, accurate diagnosis and regular follow-up are essential. The ETW is dynamic and its progression should be continuously monitored. A risk analysis table was developed to systematically record risk factors for ETW (Fig. 2). This allows ETW management to be integrated more efficiently into clinical practice and the progression to be documented over the years. If ETW is assumed, the risk analysis should be performed and updated at least every two years. In the assessment, risk-promoting and risk-inhibiting factors are marked, added together and compared. If the negative factors pre-dominate, measures should be taken to minimize the risk for ETW. The main purpose of the risk analysis is therefore to evaluate the individual etiology, coun-teract negative factors, promote positive factors and prevent progression.