Resistance and virulence genes characteristic of a South Asia Clade (I) Candida auris strain isolated from blood in Beijing.

INTRODUCTION: Candida auris is a globally disseminated invasive ascomycetous yeast, that imposes a substantial burden on healthcare systems. It has been documented to have spread to over 40 countries across six continents, necessitating in-depth comprehension through advanced techniques like Whole-Genome Sequencing. METHOD: This study entailed the isolation and Whole-Genome Sequencing of a fluconazole-resistant C. auris strain (CA01) obtained from a patient's blood in Beijing. Genome analysis was conducted to classify the strain, and molecular docking was performed to understand the impact of mutations on drug resistance. RESULTS: Genome analysis revealed that CA01 belongs to the South Asia Clade (I) and shares the closest genetic relationship with previously reported strains BJCA001 and BJCA002. Notably, unlike BJCA001, CA01 exhibits significant resistance to fluconazole primarily due to the A395T mutation in the ERG11 gene. Molecular docking studies demonstrated that this mutation leads to geometric changes in the active site where fluconazole binds, resulting in decreased binding affinity. Additionally, the present findings have identified several core virulence genes in C. auris, such as RBF1. DISCUSSION: The findings from this study expand the understanding of the genetic diversity and adaptive mechanisms of C. auris within the South Asia Clade (I). The observed fluconazole resistance driven by the ERG11 mutation A395T highlights the need for heightened awareness and adaptation in clinical treatment strategies in China. This study provides critical insights into drug resistance and virulence profiles at a genetic level, which could guide future therapeutic and management strategies for C. auris infections.

Modified minimally invasive surgery in reconstructing the temporomandibular joint disk by transplantation of the temporalis myofascial flap.

OBJECTIVE: The transplantation of temporalis myofascial flap (TMF) is an indispensable method to treat severe temporomandibular joint disorders with disk failure. How to select the indication and the ways of transplantation is still a challenging topic for achieving the ideal effect. We reported the new methods and follow-up results of the patients treated with pedicled TMF transplantation. METHODS: Retrospective case series was performed at Temporomandibular Joint Specialist Clinic, the First Affiliated Hospital of Xinjiang Medical University, from December 2014 to August 2022. 39 patients (50 sides) included anterior disk displacement without reduction and disk perforation who underwent discectomy and immediate reconstruction with pedicled TMF. The initial and postoperative maximum mouth opening (MMO), and pain visual analogue scale (VAS) were compared via paired t-test and Wilcoxon signed-rank sum test, respectively. RESULTS: The average of follow-up time was 30.07 months. The reconstructed temporomandibular joints basically achieved stable occlusion, good function, and satisfactory effect. The patients displayed a remarkable reduction of VAS score of pain, and improvement of the MMO compared with that before operation (P <  0.001). MR scanning revealed the grafts in joint space showed band-shaped soft tissue density of medium signal and had the clear edges, without interruption and fragment. CONCLUSION: Reconstruction of the temporomandibular joint disk by transplantation of the TMF applying modified minimally invasive surgery was a feasible method, which could improve the function of joints and prevent adhesion, without obvious complications in donor region.

The antibacterial effect of potassium-sodium niobate ceramics based on controlling piezoelectric properties.

The implant infection is one of the most serious postsurgical complications of medical device implantation. Therefore, the development of biocompatible materials with improved antibacterial properties is of great importance. It might be a new insight to apply the intrinsic electrical properties of biomaterials to solve this problem. Here, potassium-sodium niobate piezoceramics (K0.5Na0.5NbO3, KNN) with different piezoelectric constants were prepared, and the microstructures and piezoelectric properties of these piezoceramics were evaluated. Moreover, the antibacterial effect and biocompatibility of these piezoceramics were assayed. Results showed that these piezoceramics were able to decrease the colonies of bacteria staphylococcus aureus (S. aureus), favor the rat bone marrow mesenchymal stem cells (rBMSCs) proliferation and promote the cell adhesion and spreading. The above effects were found closely related to the surface positive charges of the piezoceramics, and the sample bearing the most positive charges on its surface (sample 80KNN) had the best performance in both antibacterial effect and biocompatibility. Based on our work, it is feasible to develop biocompatible antibacterial materials by controlling piezoelectric properties.

Strategy of oxygen transfer coefficient control on the L-erythrulose fermentation by newly isolated Gluconobacter kondonii

Background: The effect of diverse oxygen transfer coefficient on the L-erythrulose production from meso-erythritol by a newly isolated strain, Gluconobacter kondonii CGMCC8391 was investigated. In order to elucidate the effects of volumetric mass transfer coefficient (K La) on the fermentations, baffled and unbaffled flask cultures, and fed-batch cultures were developed in present work. Results: With the increase of the K La value in the fed-batch culture, L-erythrulose concentration, productivity and yield were significantly improved, while cell growth was not the best in the high K La. Thus, a two-stage oxygen supply control strategy was proposed, aimed at achieving high concentration and high productivity of L-erythrulose. During the first 12 h, Klawas controlled at 40.28 h-1 to obtain high value for cell growth, subsequently K La was controlled at 86.31 h-1 to allow for high L-erythrulose accumulation. Conclusions: Under optimal conditions, the L-erythrulose concentration, productivity, yield and DCW reached 207.9 ± 7.78 g/L, 6.50 g/L/h, 0.94 g/g, 2.68 ± 0.17 g/L, respectively. At the end of fermentation, the L-erythrulose concentration and productivity were higher than those in the previous similar reports.

Effects of oxygen transfer coefficient on dihydroxyacetone production from crude glycerol

Abstract The principal objective of this study was to evaluate the kinetics of dihydroxyacetone production by Gluconobacter frateurii CGMCC 5397 under different oxygen volumetric mass transfer coefficient (kLa) conditions in submerged bioreactors using biodiesel-derived crude glycerol as the carbon source. kLa is a key fermentation parameter for the production of dihydroxyacetone. Cultivations were conducted in baffled- and unbaffled-flask cultures (the kLa values were 24.32 h−1 and 52.05 h−1, respectively) and fed-batch cultures (the kLa values were held at 18.21 h−1, 46.03 h−1, and 82.14 h−1) to achieve high dihydroxyacetone concentration and productivity. The results showed that a high kLa could dramatically increase dihydroxyacetone concentrations and productivities. The baffled-flask culture (with a kLa of 52.05 h−1) favored glycerol utilization and dihydroxyacetone production, and a dihydroxyacetone concentration as high as 131.16 g/L was achieved. When the kLa was set to 82.14 h−1 in the fed-batch culture, the dihydroxyacetone concentration, productivity and yield were 175.44 g/L, 7.96 g/L/h and 0.89 g/g, respectively, all of which were significantly higher than those in previous studies and will benefit dihydroxyacetone industrial production.

Effects of oxygen transfer coefficient on dihydroxyacetone production from crude glycerol.

The principal objective of this study was to evaluate the kinetics of dihydroxyacetone production by Gluconobacter frateurii CGMCC 5397 under different oxygen volumetric mass transfer coefficient (kLa) conditions in submerged bioreactors using biodiesel-derived crude glycerol as the carbon source. kLa is a key fermentation parameter for the production of dihydroxyacetone. Cultivations were conducted in baffled- and unbaffled-flask cultures (the kLa values were 24.32h(-1) and 52.05h(-1), respectively) and fed-batch cultures (the kLa values were held at 18.21h(-1), 46.03h(-1), and 82.14h(-1)) to achieve high dihydroxyacetone concentration and productivity. The results showed that a high kLa could dramatically increase dihydroxyacetone concentrations and productivities. The baffled-flask culture (with a kLa of 52.05h(-1)) favored glycerol utilization and dihydroxyacetone production, and a dihydroxyacetone concentration as high as 131.16g/L was achieved. When the kLa was set to 82.14h(-1) in the fed-batch culture, the dihydroxyacetone concentration, productivity and yield were 175.44g/L, 7.96g/L/h and 0.89g/g, respectively, all of which were significantly higher than those in previous studies and will benefit dihydroxyacetone industrial production.

Effects of oxygen transfer coefficient on dihydroxyacetone production from crude glycerol

The principal objective of this study was to evaluate the kinetics of dihydroxyacetone production by Gluconobacter frateurii CGMCC 5397 under different oxygen volumetric mass transfer coefficient (kLa) conditions in submerged bioreactors using biodiesel-derived crude glycerol as the carbon source. kLa is a key fermentation parameter for the production of dihydroxyacetone. Cultivations were conducted in baffled- and unbaffled-flask cultures (the kLa values were 24.32 h1 and 52.05 h1, respectively) and fed-batch cultures (the kLa values were held at 18.21 h1, 46.03 h1, and 82.14 h1) to achieve high dihydroxyacetone concentration and productivity. The results showed that a high kLa could dramatically increase dihydroxyacetone concentrations and productivities. The baffled-flask culture (with a kLa of 52.05 h1) favored glycerol utilization and dihydroxyacetone production, and a dihydroxyacetone concentration as high as 131.16 g/L was achieved. When the kLa was set to 82.14 h1 in the fed-batch culture, the dihydroxyacetone concentration, productivity and yield were 175.44 g/L, 7.96 g/L/h and 0.89 g/g, respectively, all of which were significantly higher than those in previous studies and will benefit dihydroxyacetone industrial production. (AU)

The complete mitochondrial genome sequence of Colossoma macropomum (Characiformes: Serrasalmidae).

Colossoma macropomum (Cuvier, 1816) is the largest characin of South America. This species and its congeners mainly feed on zooplankton, insects, snails and decaying plants. In this paper, we sequenced and annotated the complete mitogenome of C. macropomum. The total length is 16,703 bp, and it typically consist of 37 genes, including 13 protein-coding genes, two rRNAs, 22 tRNA, a light-strand replication origin (OL) and a large control region (D-loop). The overall base composition is 29.9%, 24.6%, 29.5% and 15.9% for A, T, C and G, respectively, with a slight bias on AT content (54.6%). All protein-coding genes share the start codon ATG, except for COI, which begins with GTG. Most of them have TAA or TAG as the stop codon, except COII, ND4 use AGA and COI, Cytb use an incomplete stop codon T. This information could provide useful molecular data and contribute to further phylogenetic studies of Characiformes and Serrasalmidae.