Bacteria-Derived Cellulose Membranes Modified with Graphene Oxide-Silver Nanoparticles for Accelerating Wound Healing.

This study reports on the modification of bacterial cellulose (BC) membranes produced by static fermentation of Komagataeibacter xylinus bacterial strains with graphene oxide-silver nanoparticles (GO-Ag) to yield skin wound dressings with improved antibacterial properties. The GO-Ag sheets were synthesized through chemical reduction with sodium citrate and were utilized to functionalize the BC membranes (BC/GO-Ag). The BC/GO-Ag composites were characterized to determine their surface charge, morphology, exudate absorption, antimicrobial activity, and cytotoxicity by using fibroblast cells. The antimicrobial activity of the wound dressings was assessed against Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa. The results indicate that the BC/GO-Ag dressings can inhibit ∼70% of E. coli cells. Our findings also revealed that the porous BC/GO-Ag antimicrobial dressings can efficiently retain 94% of exudate absorption after exposure to simulated body fluid (SBF) for 24 h. These results suggest that the dressings could absorb excess exudate from the wound during clinical application, maintaining adequate moisture, and promoting the proliferation of epithelial cells. The BC/GO-Ag hybrid materials exhibited excellent mechanical flexibility and low cytotoxicity to fibroblast cells, making excellent wound dressings able to control bacterial infectious processes and promote the fast healing of dermal lesions.

Loading of bacterial cellulose dressing with frutalin, a lectin from Artocarpus incisa L.

Bacterial cellulose (BC), produced by bacterial fermentation, is a high-purity material. BC can be oxidized (BCOXI), providing aldehyde groups for covalent bonds with drugs. Frutalin (FTL) is a lectin capable of modulating cell proliferation and remodeling, which accelerates wound healing. This study aimed to develop an FTL-incorporated dressing based on BC, and to evaluate its physicochemical properties and biological activity in vitro. An experimental design was employed to maximize FTL loading yield onto the BC and BCOXI, where independent variables were FTL concentration, temperature and immobilization time. BCOXI-FTL 1 (44.96 % ± 1.34) had the highest incorporation yield (IY) at the experimental conditions: 6 h, 5 °C, 20 µg mL-1. The second highest yield was BCOXI-FTL 6 (23.28 % ± 1.43) using 24 h, 5 °C, 100 µg mL-1. Similarly, the same reaction parameters provided higher immobilization yields for native bacterial cellulose: BC-FTL 6 (16.91 % ± 1.05) and BC-FTL 1 (21.71 % ± 1.57). Purified FTL displayed no cytotoxicity to fibroblast cells (<50 µg mL-1 concentration) during 24 h. Furthermore, BCOXI-FTL and BC-FTL were non-cytotoxic during 24 h and stimulated fibroblast migration. BCOXI-FTL demonstrated neutrophil activation in vitro similar to FTL. These promising results indicate that the bacterial cellulose matrices containing FTL at low concentrations, could be used as an innovative biomaterial for developing wound dressings.

Silver-nanoparticle-modified nanocellulose synthesized by pyroligneous acid: cytotoxicity towards HaCat cells.

In the present study, pyroligneous acid, also known as wood vinegar, has been employed as reducing and stabilizing agent in the synthesis of silver nanoparticles (AgNPs) anchored on nanocellulose (NC). The idea is to confer the latter bactericidal properties for its typical uses such as in cosmetics and food-packing. It has been demonstrated that AgNPs can be directly produced onto NC in one-pot fashion while dramatically enhancing the kinetics of AgNPs synthesis (2 h for reaction completion) in comparison to the NC-less counterpart (10 days for reaction completion). Furthermore, NC allowed for a narrower size distribution of AgNPs. NC-supported and non-supported AgNPs had sizes of 5.1 ± 1.6 nm and 16.7 ± 4.62 nm, respectively. Immortalized human keratinocytes (HaCat) cells were then employed as model to evaluate the cytotoxicity of the AgNPs-NC compound. The latter was found not to impact cell proliferation at any formulation, while decreasing the viability by only 6.8% after 72 h. This study contributes to the development of more environmentally benign routes to produce nanomaterials and to the understanding of their impact on cells.

Antimicrobial potential of oregano essential oil vehiculated in Pickering cellulose nanofibers-stabilized emulsions.

Essential oils show several biological properties, such as antimicrobial activity, but have limitations regarding their availability and stability. To maximize their antimicrobial effect and protection against environmental conditions, Pickering-type emulsions were used to vehiculate oregano essential oil (OEO) using cellulose nanofibers (CNF) as emulsion stabilizer. Enzymatic hydrolysis was used to produce CNF from a food industry waste (cassava peel), obtaining an environmentally sustainable emulsion stabilizer. It was evaluated how the different properties of the nanofibers affected the stability of the emulsions. Furthermore, the composition of the dispersed phase was varied (different ratios of OEO and sunflower oil-SO) in view of the target application in biodegradable active coatings. Even at very low concentration (0.01 % w/w), CNF was able to form kinetically stable emulsions with small droplet sizes using oil mixtures (OEO + SO). The stabilization mechanism was not purely Pickering, as there was a reduction in interfacial tension. Excellent antimicrobial activity was observed against bacteria and the fungus Alternaria alternata, demonstrating the ability to apply these emulsions in active systems such as coatings and films. An improvement in the stability of emulsions was observed when using a mixture of oils, which is extremely advantageous considering costs and stability to heat treatments, since the desired antimicrobial activity is maintained for the final application.

Development of silanized bacterial cellulose aerogels for the incorporation of natural oils with healing properties: Copaiba (Copaifera officinalis), bourbon geranium (Pelargonium X ssp.) essential oils and buriti (Mauritia flexuosa) vegetable oil.

Bacterial cellulose (BC) represents a promising biomaterial, due to its unique and versatile properties. We report, herein, on purposely-designed structural modifications of BC that enhance its application as a wound dressing material. Chemical modification of the functional groups of BC was performed initially to introduce a hydrophobic/oleophilic character to its surface. Specifically, silanization was carried out in an aqueous medium using methyltrimethoxisilane (MTMS) as the silanizing agent, and aerogels were subsequently prepared by freeze-drying. The BC-MTMS aerogel obtained displayed a highly porous (99 %) and lightweight structure with an oil absorption capacity of up to 52 times its dry weight. The XRD pattern indicated that the characteristic crystallographic planes of the native BC were maintained after the silanization process. Thermal analysis showed that the thermal stability of the BC-MTMS aerogel increased, as compared to the pure BC aerogel (pBC). Moreover, the BC-MTMS aerogel was not cytotoxic to fibroblasts and keratinocytes. In the second step of the study, the incorporation of natural oils into the aerogel's matrix was found to endow antimicrobial and/or healing properties to BC-MTMS. Bourbon geranium (Pelargonium X ssp.) essential oil (GEO) was the only oil that exhibited antimicrobial activity against the tested microorganisms, whereas buriti (Mauritia flexuosa) vegetable oil (BVO) was non-cytotoxic to the cells. This study demonstrates that the characteristics of the BC structure can be modified, while preserving its intrinsic features, offering new possibilities for the development of BC-derived materials for specific applications in the biomedical field.

Virus adsorbent systems based on Amazon holocellulose and nanomaterials.

The environment preservation has been an important motivation to find alternative, functional, and biodegradable materials to replace polluting petrochemicals. The production of nonbiodegradable face masks increased the concentration of microplastics in the environment, highlighting the need for sustainable alternatives, such as the use of local by-products to create efficient and eco-friendly filtering materials. Furthermore, the use of smart materials can reduce the risk of contagion and virus transmission, especially in the face of possible mutations. The development of novel materials is necessary to ensure less risk of contagion and virus transmission, as well as to preserve the environment. Taking these factors into account, 16 systems were developed with different combinations of precursor materials (holocellulose, polyaniline [ES-PANI], graphene oxide [GO], silver nanoparticles [AgNPs], and activated carbon [AC]). Adsorption tests of the spike protein showed that the systems containing GO and AC were the most efficient in the adsorption process. Similarly, plate tests conducted using the VSV-IN strain cultured in HepG2 cells showed that the system containing all phases showed the greatest reduction in viral titer method. In agreement, the biocompatibility tests showed that the compounds extracted from the systems showed low cytotoxicity or no significant cytotoxic effect in human fibroblasts. As a result, the adsorption tests of the spike protein, viral titration, and biocompatibility tests showed that systems labeled as I and J were the most efficient. In this context, the present research has significantly contributed to the technological development of antiviral systems, with improved properties and increased adsorption efficiency, reducing the viral titer and contributing efficiently to public health. In this way, these alternative materials could be employed in sensors and devices for filtering and sanitization, thus assisting in mitigating the transmission of viruses and bacteria. RESEARCH HIGHLIGHTS: Sixteen virus adsorbent systems were developed with different combinations of precursor materials (holocellulose, polyaniline (ES-PANI), graphene oxide (GO), silver nanoparticles (AgNPs), and activated carbon (AC)). The system that included all of the nanocomposites holocellulose, PANI, GO, AgNPs, and AC showed the greatest reduction in viral titration. The biocompatibility tests revealed that all systems caused only mild or moderate cytotoxicity toward human fibroblasts.

Nanocomposite Based on Bacterial Cellulose and Silver Nanoparticles Improve Wound Healing Without Exhibiting Toxic Effect.

Wound healing is an important and complex process, containing a multifaceted process governed by sequential yet overlapping phases. Certain treatments can optimize local physiological conditions and improve wound healing. Silver nanoparticles (AgNP) are widely known for their antimicrobial activity. On the other hand, bacterial cellulose (BC) films have been used as a dressing that temporarily substitutes the skin, offering many advantages in optimizing wound healing, in addition to being highly biocompatible. Considering the promising activities of AgNP and BC films, the present study aimed to evaluate the wound healing activity in Wistar Hannover rats using a nanocomposite based on bacterial cellulose containing AgNP (AgBC). In a period of 21 days, its influence on the wound area, microbial growth, histopathological parameters, and collagen content were analyzed. In addition, toxicity indicators were assessed, such as weight gain, water consumption, and creatinine and alanine transaminase levels. After 14 days of injury, the animals treated with AgBC showed a significant increase in wound contraction. The treatment with AgBC significantly reduced the number of microbial colonies compared to other treatments in the first 48 h after the injury. At the end of the 21 experimental days, an average wound contraction rate greater than 97 % in relation to the initial area was observed, in addition to a significant increase in the amount of collagen fibers at the edge of the wounds, lower scores of necrosis, angiogenesis and inflammation, associated with no systemic toxicity. Therefore, it is concluded that the combination of preexisting products to form a new nanocomposite based on BC and AgNP amplified the biological activity of these products, increasing the effectiveness of wound healing and minimizing possible toxic effects of silver.

Cellulose-based hydrogels towards an antibacterial wound dressing.

Hydrogels are promising candidates for wound healing bandages because they can mimic the native skin microenvironment. Additionally, there is increasing growth in the use of naturally derived materials and plant-based biomaterials to produce healthcare products with healing purposes because of their biocompatibility and biodegradation properties. In this study, cellulose extracted from biodiverse sources in Ecuador was used as the raw material for the fabrication of hydrogels with enhanced antifouling properties. Fourier-transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), and scanning electron microscopy (SEM) were used to characterize the cellulose and hydrogels. In vitro and ex vivo tests were performed to evaluate the antimicrobial activity of hydrogels against Gram-negative bacteria as a model. Finally, the hydrogel synthesized with cellulose extracted from pitahaya showed improved antibacterial activity when applied over pigskin as a proof of concept for wound dressing. Therefore, the present results suggest that cellulose-based hydrogels are good candidates for application as wound dressings.

Ascidian-Inspired Supramolecular Cellulose Nanocomposite Hydrogels with Antibacterial Activity.

The design of ultratough hydrogels has recently emerged as a topic of great interest in the scientific community due to their ability to mimic the features of biological tissues. An outstanding strategy for preparing these materials relies on reversible and dynamic cross-links within the hydrogel matrix. In this work, inspired by the composition of ascidians' tunic, stretchable supramolecular hydrogels combining poly(vinyl alcohol), green tea-derived gallic acid, and rigid tannic acid-coated cellulose nanocrystals (TA@CNC) were designed. The addition of TA@CNC nanofillers in concentrations up to 1.2 wt % significantly impacted the mechanical and viscoelastic properties of the hydrogels due to the promotion of hydrogen bonding with the polymer matrix and polyphenols π-π stacking interactions. These supramolecular associations endow the hydrogels with excellent stretchability and strength (>340%, 540 kPa), low thermoreversible gel-sol transition (60 °C), and remolding ability, while the natural polyphenols provided potential antibacterial properties. These versatile materials can be anticipated to open up new prospects for the rational design of polyphenol-based cellulosic hydrogels for different biomedical applications.

Evaluation of an Efficient and Skin-Adherent Semisolid Sunscreen Nanoformulation.

INTRODUCTION: Sunscreens are substances applied on the skin surface to protect the skin from the harmful effects of UV light. Nanoparticles can increase the retention time of the sunscreen on the skin surface and its efficacy, by acting as physical barriers. The present investigation aimed to evaluate the influence of the chitosan coating of benzophenone-3-loaded lipid-core nanocapsules (CH-LCN) on the skin adhesion and photoprotective effect of the sunscreen. METHODS: CH-LNC were obtained by the interfacial deposition of preformed polymer. A suitable semisolid formulation was obtained by using hydroxyethyl cellulose as the gel-forming polymer. Skin adhesion experiments were performed in vitro by applying the formulation on porcine skin and keeping it under water at 32 °C for up to 60 min. Photoprotective effect was analyzed in vitro by the capacity of the formulations to protect a photo unstable substance (resveratrol) from degradation under UV light. RESULTS: CH-LNC presented size of around 150 nm, with low polydispersity, positive zeta potential, due to chitosan, and benzophenone-3 encapsulation efficiency of close to 100% (3 mg/mL). The proposed gel presented suitable consistence and pH for skin application and benzophenone-3 concentration of around 3 mg/g. Although coated and uncoated lipid-core nanocapsules increased benzophenone-3 skin adhesion after 10 min of water immersion, only the nanoparticles coated with chitosan were able to do so after 60 min. The chitosan coating of the nanocapsules increased the photoprotection of the sunscreen under UVA and UVB light after 60 min of exposure, probably due to the film-forming properties of chitosan. CONCLUSION: The chitosan coating of CH-LCN increased the skin adhesion and the photoprotective effect of the sunscreen.

Cellulose Hydrogels Containing Geraniol and Icaridin Encapsulated in Zein Nanoparticles for Arbovirus Control.

The most important arboviruses are those that cause dengue, yellow fever, chikungunya, and Zika, for which the main vector is the Aedes aegypti mosquito. The use of repellents is an important way to combat mosquito-borne pathogens. In this work, a safe method of protection employing a repellent was developed based on a slow release system composed of zein nanoparticles containing the active agents icaridin and geraniol incorporated in a cellulose gel matrix. Analyses were performed to characterize the nanoparticles and the gel formulation. The nanoparticles containing the repellents presented a hydrodynamic diameter of 229 ± 9 nm, polydispersity index of 0.38 ± 0.10, and zeta potential of +29.4 ± 0.8 mV. The efficiencies of encapsulation in the zein nanoparticles exceeded 85% for icaridin and 98% for geraniol. Rheological characterization of the gels containing nanoparticles and repellents showed that the viscoelastic characteristic of hydroxypropylmethylcellulose gel was preserved. Release tests demonstrated that the use of nanoparticles in combination with the gel matrix led to improved performance of the formulations. Atomic force microscopy analyses enabled visualization of the gel network containing the nanoparticles. Cytotoxicity assays using 3T3 and HaCaT cell cultures showed low toxicity profiles for the active agents and the nanoparticles. The results demonstrated the potential of these repellent systems to provide prolonged protection while decreasing toxicity.

Residual concentrations of antimicrobial growth promoters in poultry litter favour plasmid conjugation among Escherichia coli.

Considering that plasmid conjugation is a major driver for the dissemination of antimicrobial resistance in bacteria, this study aimed to investigate the effects of residual concentrations of antimicrobial growth promoters (AGPs) in poultry litter on the frequencies of IncFII-FIB plasmid conjugation among Escherichia coli organisms. A 2 × 5 factorial trial was performed in vitro, using two types of litter materials (sugarcane bagasse and wood shavings) and five treatments of litter: non-treated (CON), herbal alkaloid sanguinarine (SANG), AGPs monensin (MON), lincomycin (LCM) and virginiamycin (VIR). E. coli H2332 and E. coli J62 were used as donor and recipient strains, respectively. The presence of residues of monensin, lincomycin and virginiamycin increased the frequency of plasmid conjugation among E. coli in both types of litter materials. On the contrary, sanguinarine significantly reduced the frequency of conjugation among E. coli in sugarcane bagasse litter. The conjugation frequencies were significantly higher in wood shavings compared with sugarcane bagasse only in the presence of AGPs. Considering that the presence of AGPs in the litter can increase the conjugation of IncFII-FIB plasmids carrying antimicrobial resistance genes, the real impact of this phenomenon on the dissemination of antimicrobial resistant bacteria in the poultry production chain must be investigated.

Cytocompatibility and osteogenic differentiation of stem cells from human exfoliated deciduous teeth with cotton cellulose nanofibers for tissue engineering and regenerative medicine.

Cellulose nanofibers (CNFs) are natural polymers with physical-chemical properties that make them very attractive for modulating stem cell differentiation, a crucial step in tissue engineering and regenerative medicine. Although cellulose is cytocompatible, when materials are in nanoscale, they become more reactive, needing to evaluate its potential toxic effect to ensure safe application. This study aimed to investigate the cytocompatibility of cotton CNF and its differentiation capacity induction on stem cells from human exfoliated deciduous teeth. First, the cotton CNF was characterized. Then, the cytocompatibility and the osteogenic differentiation induced by cotton CNF were examined. The results revealed that cotton CNFs have about 6-18 nm diameters, and the zeta potential was -10 mV. Despite gene expression alteration, the cotton CNF shows good cytocompatibility. The cotton CNF induced an increase in phosphatase alkaline activity and extracellular matrix mineralization. The results indicate that cotton CNF has good cytocompatibility and can promote cell differentiation without using chemical inducers, showing great potential as a new differentiation inductor for tissue engineering and regenerative medicine applications.

Acute Caffeine Intake Reduces Perceived Exertion But Not Muscle Pain during Moderate Intensity Cycling Exercise in Women with Fibromyalgia.

OBJECTIVE: Exacerbated perceived exertion and muscle pain responses during exercise might limit physical activity practice in fibromyalgia patients. Thus, nutritional strategies that can reduce perceived exertion and muscle pain during exercise in fibromyalgia patients would be useful. The purpose of this study was to investigate the effects of acute caffeine intake on the perceptions of exertion and muscle pain during a moderate intensity exercise in women with fibromyalgia. METHOD: Using a randomized, double-blinded, placebo-controlled and crossover experimental design, eleven sedentary women diagnosed with fibromyalgia (age: 44.6 ± 10.5 years; body mass index: 28.5 ± 4.5 kg.m-2) ingested a capsule containing either caffeine (5 mg per kg of body mass) or cellulose (placebo), 60 minutes before performing a 30-minute constant-load cycling exercise, with work rate fixed at 50% of their individual peak workload attained in an incremental exercise test. Ratings of perceived leg muscle pain and perceived exertion were assessed every 5 minutes of exercise. RESULTS: The perceived leg muscle pain was similar (F(1,10) = 1.18, p = 0.30, ŋ2 = 0.11) between caffeine (2.1 ± 1.2 arbitrary units) and placebo conditions (2.2 ± 0.9 arbitrary units). The perceived exertion, however, was on average 8 ± 6% lower (F(1,10) = 12.13; p = 0.006; ŋ2 = 0.55) during exercise in the caffeine condition (12.4 ± 1.3 arbitrary units) than in the placebo condition (13.1 ± 1.1 arbitrary units). CONCLUSIONS: These findings indicate that acute caffeine intake could be an attractive strategy to attenuate the exacerbated perceived exertion of fibromyalgia patients during moderate intensity exercise.

Alginate-amphotericin B nanocomplexes covered by nanocrystals from bacterial cellulose: physico-chemical characterization and in vitro toxicity.

Nanocomplexes systems made up natural poylymers have pharmacotechnical advantages such as increase of water solubility and a decrease of drugs toxicity. Amphotericin B (AmB) is a drug apply as anti-leishmanial and anti-fungal, however it has low water solubility and high toxicity, limiting its therapeutic application. With this in mind, the present study aimed to produce nanocomplexes composed by alginate (Alg), a natural polymer, with AmB covered by nanocrystals from bacterial cellulose (CNC). For this reason, the nanocomplexes were produced utilizing sodium alginate, amphotericin B in a borate buffer (pH 11.0). The CNC was obtained by enzymatic hydrolysis of the bacterial cellulose. To CNC cover the nanocomplexes 1 ml of the nanocomplexes was added into 1 ml of 0.01% CNC suspension. The results showed an ionic adsorption of the CNC into the Alg-AmB nanocomplexes surface. This phenomena was confirmed by an increase in the particle size and PDI decrease. Besides, nanocomplexes samples covered by CNC showed uniformity. The amorphous inclusion of AmB complex into the polysaccharide chain network in both formulations. AmB in the nanocomplexes was in supper-aggregated form and showed good biocompatibility, being significantly less cytotoxic in vitro against kidney cells and significantly less hemolytic compared to the free-drug. The in vitro toxicity results indicated the Alg-AmB nanocomplexes can be considered a non-toxic alternative to improve the AmB therapeutic effect. All process to obtain nanocomplexes and it coat was conduce without organic solvents, can be considered a green process, and allowed to obtain water soluble particles. Furthermore, CNC covering the nanocomplexes brought additional protection to the system can contribut advancement in the pharmaceutical.

Nanocellulose for peripheral nerve regeneration in rabbits using citric acid as crosslinker with chitosan and freeze/thawed PVA.

This work investigates peripheral nerve regeneration using membranes consisting of pure chitosan (CHI), which was further blended with nanofibrillated cellulose, with citric acid as crosslinker, with posterior addition of polyvinyl alcohol, with subsequent freeze thawing. Nanocellulose improves the mechanical and thermal resistance, as well as flexibility of the film, which is ideal for the surgical procedure. The hydrogel presented a slow rate of swelling, which is adequate for cell and drug delivery. A series ofin vitrotests revealed to be non-toxic for neuronal Schwann cell from the peripheral nervous system of Rattus norvegicus, while there was a slight increase in toxicity if crosslink is performed-freeze-thaw. Thein vivoresults, using rabbits with a 5 mm gap nerve defect, revealed that even though pure CHI was able to regenerate the nerve, it did not present functional recovery with only the deep pain attribute being regenerated. When autologous implant was used jointly with the biomaterial membrane, as a covering agent, it revealed a functional recovery within 15 d when cellulose and the hydrogel were introduced, which was attributed to the film charge interaction that may help influence the neuronal axons growth into correct locations. Thus, indicating that this system presents ideal regeneration as nerve conduits.

PINE NANOCELLULOSE AND BACTERIAL NANOCELLULOSE DRESSINGS ARE SIMILAR IN THE TREATMENT OF SECOND-DEGREE BURN? EXPERIMENTAL STUDY IN RATS.

BACKGROUND: Crusts in 7th follow-up day: G1 yes; G2 no; G3 no (left to right). Bespite all the advances in medicine and the wide variety of dressings available, the treatment of burn wounds still represents an important medical challenge. The pinus cellulose membrane dressing is a biomaterial with characteristics similar to those of bacterial cellulose, but with lower cost. AIM: To evaluate the efficacy of pinus nanocellulose membrane on healing of deep second degree burns in rats and compare with Membracel®. METHOD: Thirty male Wistar rats were submitted to deep second degree burn in dorse, with boiling water at 97o C for 20 s, generating a 314 mm² area wound. The animals were distributed in three dressing groups (n=10): group 1 - simple gauze; group 2 - bacterial cellulose membrane (Membracel®); and group 3 - pinus cellulose membrane. They were evaluated for 20 days to verify clinical condition, macro and microscopic appearance and wound contraction. RESULTS: All of them remained clinically well with no differences in weight. Crusts were observed in group 1, and none in groups 2 and 3. Regarding to scar contraction, groups 2 and 3 were similar, better than group 1. Microscopic analysis showed predominance of advanced healing degree in groups 1 and 3, and initial in group 2. Mature collagen was predominant in all groups. CONCLUSION: The pinus nanocellulose membrane is effective in the treatment of experimental second degree burn in rats and its effectiveness is similar to that of the bacterial nanocellular membrane.

Neuroprotective effect of melatonin loaded in ethylcellulose nanoparticles applied topically in a retinal degeneration model in rabbits.

We are reporting for the first time the synthesis and application of an innovative nanometric system for the controlled topic release of melatonin in the retina. The ethylcellulose nanocapsules were characterized by diverse physicochemical techniques (scanning electron microscopy, zeta potential, hydrodynamic diameters) and an in vitro release study was done. A complete ex vivo and in vivo trans-corneal permeation and an irritation study were carried out with the new formulations in albino rabbits, to which a retinal degenerative model was induced. The results obtained demonstrate that the in vitro release of melatonin (1 mg/mL and 2 mg/mL) transported by nanocapsules is slower when compared to a solution of melatonin. Greater penetration of melatonin through the cornea was demonstrated by ex vivo and in vivo tests. This can be attributable to an enhanced neuroprotective effect of melatonin on retinal ganglion cells when it is included in ethylcellulose nanocapsules compared to a solution of melatonin. These outstanding findings add promising new perspectives to current knowledge about administrations using nano-technological tools in the treatment of neurodegenerative diseases at the ocular level.

Bacterial cellulose: From production optimization to new applications.

Bacterial cellulose (BC) is a biopolymer of great significance to the medical, pharmaceutical, and food industries. However, a high concentration of carbon sources (mainly glucose) and other culture media components is usually required to promote a significant yield of BC, which increases the bioprocess cost. Thus, optimization strategies (conventional or statistical) have become relevant for the cost-effective production of bacterial cellulose. Additionally, this biopolymer may present new properties through modifications with exogenous compounds. The present review, explores and discusses recent studies (last five years) that report the optimization of BC production and its yield as well as in situ and ex situ modifications, resulting in improved mechanical, antioxidant, and antimicrobial properties of BC for new applications.

Supramolecular hydrogels based on cellulose for sustained release of therapeutic substances with antimicrobial and wound healing properties.

A multifaceted hydrogel-based formulation was reported. The hydrogel was prepared by crosslinking cellulose and substituted chalcone. Moreover, the formulation was conjugated with carbon nanotubes with the aim of increasing the loading amount of bioactive compounds such as allantoin, dexpanthenol, resveratrol and linezolid. The hydrogel formation was confirmed by swelling tests, FT-IR spectroscopy, thermogravimetric analysis and SEM. The hydrogel showed an improved release rate of therapeutic substances, exhibiting a simultaneous and coordinated release according to the chromatographic studies. The efficacy of drug release was confirmed by wound closure and in vivo wound healing studies that showed promising healing results. The antibacterial assays demonstrated that the sustained release of linezolid tends to be very effective. In conclusion, a multifaceted formulation based on carbon nanotube-containing cellulose-chalcone was developed that can potentially be utilized in treating complex wounds owing to its improved wound healing properties and prevention of potential infections.