Effects of the concentration of seeds, finite time-dependent supersaturations, and viscosity on the crystallization kinetics of monosodium urate monohydrate.

CONTEXT: Although the crystallization of monosodium urate monohydrate (MSUM) has a crucial role in the occurrence of gout, which is an inflammatory arthritis disease, theoretical models have not been able to describe all features observed in its seeded growth kinetics. In contrast to previous modeling approaches, we show that our model can reproduce qualitative features typically observed in experiments. In particular, our results show that the higher the initial supersaturation and the lower the viscosity, the faster the crystallization kinetics, and they also indicate that there are distinct growth regimes for low and high concentrations of seeds. METHODS: In this work, we introduce an alternative approach based on a master equation that allows us to incorporate hypotheses for the seeded growth crystallization of MSUM in a more transparent way. Such an approach includes not only effects that are related to the finite time-dependent supersaturation and concentration of seeds, but it can also be used to determine how the viscosity of the solution can affect the crystallization kinetics of MSUM molecules.

Multivariate Analysis of Solubility Parameters for Drug-Polymer Miscibility Assessment in Preparing Raloxifene Hydrochloride Amorphous Solid Dispersions.

The success of obtaining solid dispersions for solubility improvement invariably depends on the miscibility of the drug and polymeric carriers. This study aimed to categorize and select polymeric carriers via the classical group contribution method using the multivariate analysis of the calculated solubility parameter of RX-HCl. The total, partial, and derivate parameters for RX-HCl were calculated. The data were compared with the results of excipients (N = 36), and a hierarchical clustering analysis was further performed. Solid dispersions of selected polymers in different drug loads were produced using solvent casting and characterized via X-ray diffraction, infrared spectroscopy and scanning electron microscopy. RX-HCl presented a Hansen solubility parameter (HSP) of 23.52 MPa1/2. The exploratory analysis of HSP and relative energy difference (RED) elicited a classification for miscible (n = 11), partially miscible (n = 15), and immiscible (n = 10) combinations. The experimental validation followed by a principal component regression exhibited a significant correlation between the crystallinity reduction and calculated parameters, whereas the spectroscopic evaluation highlighted the hydrogen-bonding contribution towards amorphization. The systematic approach presented a high discrimination ability, contributing to optimal excipient selection for the obtention of solid solutions of RX-HCl.

Highly Soluble Dacarbazine Multicomponent Crystals Less Prone to Photodegradation.

Dacarbazine (DTIC) is a widely prescribed oncolytic agent to treat advanced malignant melanomas. Nevertheless, the drug is known for exhibiting low and pH-dependent solubility, in addition to being photosensitive. These features imply the formation of the inactive photodegradation product 2-azahypoxanthine (2-AZA) during pharmaceutical manufacturing and even drug administration. We have focused on developing novel DTIC salt/cocrystal forms with enhanced solubility and dissolution behaviors to overcome or minimize this undesirable biopharmaceutical profile. By cocrystallization techniques, two salts, two cocrystals, and one salt-cocrystal have been successfully prepared through reactions with aliphatic carboxylic acids. A detailed structural study of these new multicomponent crystals was conducted using X-ray diffraction (SCXRD, PXRD), spectroscopic (FT-IR and 1H NMR), and thermal (TG and DSC) analyses. Most DTIC crystal forms reported display substantial enhancements in solubility (up to 19-fold), with faster intrinsic dissolution rates (from 1.3 to 22-fold), contributing positively to reducing the photodegradation of DTIC in solution. These findings reinforce the potential of these new solid forms to enhance the limited DTIC biopharmaceutical profile.

The use of green protic ionic liquids in the crystallization of isoniazid: Evaluation of physicochemical and biological properties of drug.

This study evaluated the synthesis of protic ionic liquids (PILs), 2-hydroxy ethylammonium formate (2-HEAF) and 2-hydroxy ethylammonium acetate (2-HEAA), and their applicability in the crystallization process of the active pharmaceutical ingredient isoniazid (INH) as anti-solvent. Isoniazid is an antibiotic used in the treatment of tuberculosis infections, being used as a first-line chemotherapeutic agent against Mycobacterium tuberculosis. Futhermore, this investigation was conducted in order to evaluate how these PILs can influence the habit, solubility, stability, and therapeutic efficiency of the obtained isoniazid crystals. The 2-HEAF and 2-HEAA PILs were easily formed in reactions between ethanolamine and carboxylic acids (formic or acetic acid), and they have no toxicity against Artemia salina. The PILs were able to crystallize isoniazid, influencing the crystal habit and size. The greatest variations in the hydrogen signals of the NH2 and NH groups of the amine and low variations in the chemical shifts of the hydrogens of the cation of the ethanolamine group from 2-HEAA and 2-HEAF indicate that PILs establish possibly weak interactions with INH. The obtained crystals were amorphous and showed higher solubility in water than standard INH. Moreover, these crystals showed therapeutic efficiency inantimycobacterial activity to inhibit the growth of Mycobacterium tuberculosis. The INH:2-HEAF only degraded 5.1 % (w/w), however, INH:2-HEAA degraded 32.8 % (w/w) after 60 days in an accelerated atmosphere. Then, the 2-HEAA and 2-HEAF were able to crystallize isoniazid, being a new application for these PILs. The used PILs also influenced the characteristics of isoniazid crystals.

Optimizing Nonsink Dissolution Testing for Amorphous Solid Dispersions: Exploring Sample Handling Variables.

This study aims to investigate key variables affecting the dissolution of amorphous pharmaceuticals. We examined sample treatment methods (centrifugation vs syringe filtration), time delays between sample collection and processing (immediate, 2, or 24 h), and different sample preparations (bare powder, capsules, or tablets). These factors were evaluated through both sink and nonsink dissolution experiments, using controlled supersaturation conditions (sink index ≈ 0.1) with amorphous solid dispersions (ASDs) containing low-substituted hydroxypropyl cellulose (L-HPC) and either indomethacin or posaconazole as model drugs. Our results highlighted the significant impact of syringe filtration on nonsink dissolutions, particularly the notable reduction in dissolved drug concentration, possibly due to filtration-induced precipitation. Moreover, introducing a delay of 2 or 24 h between sample collection and quantitation under nonsink conditions led to substantial concentration changes. This effect was not as pronounced when samples underwent centrifugation, and only the analysis was delayed for 2 h. The findings also emphasize the importance of accounting for delays introduced by pharmaceutical formulations, particularly in assessing the kinetic-solubility profiles of ASDs. This research offers valuable insights into the field of ASDs, enhancing our understanding of how these variables can influence dissolution results.

Novel Apoplastic Antifreeze Proteins of Deschampsia antarctica as Enhancer of Common Cell Freezing Media for Cryobanking of Genetic Resources, a Preliminary Study.

Antifreeze proteins (AFPs) are natural biomolecules found in cold-adapted organisms that lower the freezing point of water, allowing survival in icy conditions. These proteins have the potential to improve cryopreservation techniques by enhancing the quality of genetic material postthaw. Deschampsia antarctica, a freezing-tolerant plant, possesses AFPs and is a promising candidate for cryopreservation applications. In this study, we investigated the cryoprotective properties of AFPs from D. antarctica extracts on Atlantic salmon spermatozoa. Apoplastic extracts were used to determine ice recrystallization inhibition (IRI), thermal hysteresis (TH) activities and ice crystal morphology. Spermatozoa were cryopreserved using a standard cryoprotectant medium (C+) and three alternative media supplemented with apoplastic extracts. Flow cytometry was employed to measure plasma membrane integrity (PMI) and mitochondrial membrane potential (MMP) postthaw. Results showed that a low concentration of AFPs (0.05 mg/mL) provided significant IRI activity. Apoplastic extracts from D. antarctica demonstrated a cryoprotective effect on salmon spermatozoa, with PMI comparable to the standard medium. Moreover, samples treated with apoplastic extracts exhibited a higher percentage of cells with high MMP. These findings represent the first and preliminary report that suggests that AFPs derived from apoplastic extracts of D. antarctica have the potential to serve as cryoprotectants and could allow the development of novel freezing media.

Solid Forms of The New Antitrypanosomal 1-(4-Acetamide-Benzenesulfonyl)-Benzimidazole: Preparation and Physicochemical Characterization.

This study aimed to investigate the polymorphism of 1-(4-acetamide-benzenesulfonyl)-benzimidazole (PABZI), a newly developed compound with significant activity against Trypanosoma cruzi, the parasite which causes American trypanosomiasis (Chagas disease). Three different crystalline forms of PABZI [a solvent-free form (form I), three isostructural solvates (from isopropanol; acetonitrile-dichloromethane, and methanol-benzene) and a non-isostructural solvate from methanol] were isolated and characterized. The crystal structure of form I was resolved at 173 K and 300 K by single crystal X-ray diffraction. Physicochemical properties, including solubility, dissolution rate, wettability, and solid-state stability were assessed for the two most viable solid forms of PABZI, viz. form I and the isopropanol solvate (PABZI-isoOH). Form I exhibited a higher solubility and dissolution rate, and superior stability towards moisture (40 °C/75 % relative humidity) and UV-Visible light than PABZI-isoOH. Based on the solid-state stability results, form I was selected over PABZI-isoOH for further preclinical studies.

Frequency of the DI*A, DI*B and Band 3 Memphis polymorphism among distinct groups in Brazil

ABSTRACT Introduction: The Band 3 is a red blood cell protein that carries the Dia and Dib antigens from the Diego blood system. The SLC4A1 gene encodes Band 3; Band 3 Memphis is a polymorphism of normal Band 3 and has two variants, but only the variant II carries the Dia antigen. Objectives: Describe the frequencies of the DI*A and DI*B alleles and the Band 3 Memphis among blood donors, sickle cell disease (SCD) patients and Amazonian Indians. Methods: A total of 427 blood samples were collected and separated into three groups: 206 unrelated blood donors, 90 patients with SCD and 131 Amazonian Indians. We performed DI*A/B, normal Band 3 and Band 3 Memphis genotyping, using the Polymerase Chain Reaction Restriction Fragment Length Polymorphism (PCR-RFLP). Results: The frequency of the DI*A/DI*A genotype was 0.5% in blood donors and it was not found in other groups. The frequency of the DI*A/DI*B was higher in Amazonian Indians (33.6%) and the frequency of the DI*B/DI*B was highest in blood donors (92.2%). All 105 individuals tested were positive for the presence of normal Band 3 and of these individuals, only 5/105 (4.8%) presented the Band 3 Memphis mutation. Conclusion: We observed a higher frequency of the DI*B allele in blood donors and a low frequency of the DI*A/DI*A genotype in all groups studied. The Band 3 Memphis was found in a higher frequency in the blood donor group. Our findings highlight the importance of analyzing different population groups to gain a better understanding of the genetic association of blood group antigens.

Amorphous solid dispersions in high-swelling, low-substituted hydroxypropyl cellulose for enhancing the delivery of poorly soluble drugs.

Amorphous solid dispersions (ASDs) based on water-insoluble hydrophilic polymers can sustain supersaturation in their kinetic solubility profiles (KSPs) compared to soluble carriers. However, in the limit of very high swelling capacity, the achievable extent of drug supersaturation has not been fully examined. This study explores the limiting supersaturation behavior of ASDs of poorly soluble indomethacin (IND) and posaconazole (PCZ) based on a high-swelling excipient, low-substituted hydroxypropyl cellulose (L-HPC). Using IND as a reference, we showed that the rapid initial supersaturation buildup in the KSP of IND ASD can be simulated through sequential IND infusion steps, however at large times the KSP of IND release from ASD appears more sustained than direct IND infusion. This has been attributed to potential trapping of seed crystals generated in the L-HPC gel matrix thus limiting their growth and rate of desupersaturation. Similar result is also expected in PCZ ASD. Furthermore, the current drug loading process for ASD preparation resulted in the agglomeration of L-HPC based ASD particles, producing granules of up to 300-500 µm (cf. 20 µm individual particle), with distinct kinetic solubility profiles. This feature makes L-HPC particularly suitable as ASD carriers for fine tuning of supersaturation to achieve enhanced bioavailability for poorly soluble drugs.

Norfloxacin Cocrystals: Mechanochemical Synthesis and Scale-up Viability Through Solubility Studies.

Cocrystals are recognized as one of the most efficient approaches to improve aqueous solubility of Biopharmaceutical Classification System, BCS, classes II and IV drugs. Cocrystal discovery and the establishment of experimental conditions suitable for scale-up purposes are some of the main challenges in cocrystal investigation. In this work, the investigation of mechanochemical synthesis of norfloxacin cocrystals with picolinic and isonicotinic acids is performed, leading to the discovery of two new cocrystals of this important BCS class IV antibiotic, which were characterized through thermal, spectral and diffractometric analysis. Norfloxacin apparent aqueous solubility using the cocrystals is also presented, with higher values being obtained for all the investigated systems when compared to the pure drug. Norfloxacin has 3 polymorphs and several solvents/hydrates, which represents a challenge for obtaining pure cocrystal forms from solvent crystallization. This challenge was successfully overcome in this work, as experimental conditions to obtain the pure cocrystals (the new ones and also norfloxacin-nicotinic acid and norfloxacin-saccharin) were established using Crystal16 equipment. This is a crucial step to envisage future scale-up procedures and therefore a valuable information for the pharmaceutical industry.

Solid-state properties of Nifurtimox. Preparation, analytical characterization, and stability of an amorphous phase.

Nifurtimox (NFX) is a nitrofuran derivative used to treat Chagas disease, a neglected disease caused by the protozoan Trypanosoma cruzi. The drug is very sparingly soluble in aqueous media and no other solid phases of NFX have been reported to date. The preparation of the amorphous mode of NFX is reported, as well as its characterization by hot stage microscopy, thermal (differential scanning calorimetry and thermogravimetric analysis), spectroscopic (solid state nuclear magnetic resonance, mid-infrared, and near-infrared), diffractometric and functional (powder dissolution rate) means. The stability of the new phase was investigated. This was characterized using thermal, spectroscopic, and diffractometric methods, finding out its spontaneous reversion to the crystalline state, as sign of instability. In addition, the amorphous material proved to be sensitive to temperature, pressure, and mechanical stress, all of which accelerated phase conversion. However, it was able to remain stable in a model polymeric amorphous solid dispersion with PEG 4000 for more than one month. An approach for monitoring the conversion of the amorphous phase to its crystalline counterpart under thermal stress by chemometric analysis of mid-infrared spectra at different temperatures is also disclosed.

Influence of solvent choice and operating conditions on Chlorzoxazone crystal shape and size

Abstract Solubility of pharmaceutical drugs in organic solvents is one of the important parameters to understand the equilibrium concentration of solute-solvent, which helps optimize and design crystallization conditions to obtain the desired product crystals. In the present study, Chlorzoxazone (CHZ) is used as a model pharmaceutical compound to investigate the equilibrium solubility, the influence of solvent and the operating conditions on the shape, and the size distribution. The solubility of CHZ is determined in organic solvents like Isopropanol, Ethanol, and 2-Ethoxyethylacetate, Ethylacetate and Ethyllactate using shake flask method from -5ºC to 60ºC. The solubility of CHZ in these solvents shows an increasing trend as the temperature increases in the following order: ethyllactate + water (0.5+0.5) < ethylacetate < isopropanol < ethanol < 2-ethoxyethylacetate < ethyllactate + water (0.75+0.25). The solvents, isopropanol, ethanol, and ethyl lactate, produce needle-shaped crystals, while 2-ethoxyethylacetate and ethyl acetate tend to produce plate shaped crystals. CHZ crystals obtained from 2-ethoxyethylacetate tend to have plate shaped crystals with a lower aspect ratio and are selected for batch cooling crystallization experiments performed at different cooling rates, and agitation. It is found that the agitation at 300 rpm and the cooling rate 0.2ºC/min produce more uniform crystal size distribution

Ligancy effects on nucleation kinetics.

Nucleation of particles into crystalline structures can be observed in a wide range of systems from metallic and metal-organic compounds to colloidal and polymeric patch particles. Here, we perform kinetic Monte Carlo simulations to study the nucleation kinetics of particles with different ligancies z at constant supersaturation s. This approach allows one to determine several physico-chemical quantities as a function of s, including the growth probability P(n), the critical nucleus size n*, and the stationary nucleation rate Js. Our numerical results are rationalized in terms of a self-consistent nucleation theory where both n* and Js present a non-trivial dependence on s, but which can be determined from the values of effective z-dependent parameters.

Amaranth calcium oxalate crystals are associated with chloroplast structures and proteins.

Calcium oxalate (CaOx) crystals in plants are formed in crystal idioblasts cells and have specific geometric shapes. Their proposed functions include calcium homeostasis and carbon source, among others. Amaranth is a plant that presents high tolerance to abiotic stresses and accumulates considerable amounts of CaOx crystals; however, few studies have focused on characterizing the crystals ultrastructure and none is related to identifying proteins bound to them. This information is of great interest to understand the mechanisms related to CaOx crystal formation and to support their proposed functions. Thus, this work aimed to characterize CaOx crystals in amaranth leaves. Crystals were purified and the proteins bound to them were isolated and identified by nLC-MS/MS. Leaf sections were analyzed by light and electron microscopy. The identified proteins were related to the chloroplast such as ATPb synthase, RuBisCO large subunit, and cell wall-related proteins, which were validated by immunohistochemistry and immunogold labeling. In addition, it was observed that CaOx crystal idioblasts were formed from parenchyma cells associated with mesophyll and veins, in which the thylakoid membranes of degraded chloroplasts turned into crystal chambers. These results significantly advance our understanding of the mechanisms of CaOx crystal formation and the potential function as an alternative carbon source in leaves.

Head-to-Tail and Head-to-Head Molecular Chains of Poly(p-Anisidine): Combined Experimental and Theoretical Evaluation.

Poly(p-anisidine) (PPA) is a polyaniline derivative presenting a methoxy (-OCH3) group at the para position of the phenyl ring. Considering the important role of conjugated polymers in novel technological applications, a systematic, combined experimental and theoretical investigation was performed to obtain more insight into the crystallization process of PPA. Conventional oxidative polymerization of p-anisidine monomer was based on a central composite rotational design (CCRD). The effects of the concentration of the monomer, ammonium persulfate (APS), and HCl on the percentage of crystallinity were considered. Several experimental techniques such as X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), multifractal analysis, Nuclear Magnetic Resonance (13C NMR), Fourier-transform Infrared spectroscopy (FTIR), and complex impedance spectroscopy analysis, in addition to Density Functional Theory (DFT), were employed to perform a systematic investigation of PPA. The experimental treatments resulted in different crystal structures with a percentage of crystallinity ranging from (29.2 ± 0.6)% (PPA1HT) to (55.1 ± 0.2)% (PPA16HT-HH). A broad halo in the PPA16HT-HH pattern from 2θ = 10.0-30.0° suggested a reduced crystallinity. Needle and globular-particle morphologies were observed in both samples; the needle morphology might have been related to the crystalline contribution. A multifractal analysis showed that the PPA surface became more complex when the crystallinity was reduced. The proposed molecular structures of PPA were supported by the high-resolution 13C NMR results, allowing us to access the percentage of head-to-tail (HT) and head-to-head (HH) molecular structures. When comparing the calculated and experimental FTIR spectra, the most pronounced changes were observed in ν(C-H), ν(N-H), ν(C-O), and ν(C-N-C) due to the influence of counterions on the polymer backbone as well as the different mechanisms of polymerization. Finally, a significant difference in the electrical conductivity was observed in the range of 1.00 × 10-9 S.cm-1 and 3.90 × 10-14 S.cm-1, respectively, for PPA1HT and PPA16HT-HH.

Study of brine-halite phase separation through optical constringence and molecular dynamics.

This work presents a study of the reciprocal dispersive power, also known as constringence or Abbe number of an aqueous solution of NaCl in a wide range of concentrations. The constringence exhibited a distinct behavior in the region close to the phase transition between a phase containing exclusively brine and a phase containing brine+halite. Molecular dynamics simulations of this system indicated the existence of halite formation below the known saturation curve, which agreed with the experimental measurements, indicating a crystal growth in the unsaturated region.

Synchronization of Cocrystal Dissolution and Drug Precipitation to Sustain Drug Supersaturation.

A graphical analysis of both drug and coformer concentrations contributed by dissolving cocrystals is presented in the context of a simplified cocrystal phase diagram. The conceptual basis and analysis identify parameters that control cocrystal dissolution-drug supersaturation-precipitation (DSP) behavior. The important effects of coformer concentration, cocrystal dose, and cocrystal solubility on drug supersaturation levels are demonstrated and quantified by the DSPindex. While the studies presented rely on high and nonstoichiometric coformer concentrations contributed by the dissolving cocrystals, the concepts and findings can answer the question of whether and how much coformer should be added to cocrystal dissolution media or formulations.

Synthesis, characterization, and thermal and computational investigations of the L-histidine bis(fluoride) crystal.

Nonlinear optical materials have been investigated recently due to their potential technological applications in information storage and communications. In this context, semi-organic crystals can effectively combine the desired nonlinear optical properties of amino acids with the promising mechanical and thermal properties of inorganic materials. In this work, we have synthesized and characterized a semi-organic crystal of the amino acid L-histidine and hydrofluoric acid and investigated the chemical interactions between the organic and inorganic moieties. The crystal of L-histidine bis(fluoride) has been produced by slow solvent evaporation and characterized by X-ray diffraction (XRD) crystallography and thermogravimetric and differential thermal analyses. The XRD conducted using the Rietveld method shows that the unit cell is orthorhombic with the P21212 space group and contains four L-histidine bis(fluoride) units. Both differential thermal analysis and temperature-dependent XRD show that the crystals are thermally stable up to 191°C and do not undergo phase transition. The computational Hirshfeld surface analysis of the crystal structure reveals the main intermolecular interactions. Density functional theory has been employed to calculate the ionic interaction energy and electrostatic potential maps and confirm the spontaneity of ionic association at 191°C. The combined experimental and computational results show that the thermal stability of the semi-organic L-histidine bis(fluoride) crystal makes it suitable for nonlinear optical applications in optical sensing and communication systems.

Revisiting the birth of NaCl crystals using molecular dynamics simulation.

Molecular dynamics simulations were used to investigate the initial stage of phase separation mechanisms for an oversaturated electrolytic solution. We developed a low computational cost methodology to determine the simulation frames where the first ionic clusters are formed. By discretizing the simulation box, we obtain a density profile in the moments preceding and succeeding the nuclei's formation. The growth of the clusters identified with our methodology was analyzed until the end of the simulation. Calculation of the Steinhardt parameter showed symmetry of the solid, giving indications that the classical nucleation theory explains the mechanism of the solid formation. The methodology developed was useful for identifying phase separation mechanisms in the nucleation process. At lower concentrations, there was no formation of stable clusters. At intermediate concentrations, the analyses indicate a transition of phases in one stage, from a oversaturate electrolytic solution to a crystalline solid. At high concentration, a transition of phases in two stages, initially, is the formation of a dense liquid, and only after that, crystalline solid formed inside the dense liquid. The change in phase separation mechanism due to increasing oversaturation underscores the importance of precise determination of the driving force for phase separation and concentration limits for each mechanism.