Chitosan-based mucoadhesive films loaded with curcumin for topical treatment of oral cancer.

This study aimed to develop mucoadhesive chitosan-based films capable of enhancing the curcumin penetration into the oral mucosa to treat oral cancers. We developed three films containing medium molecular weight chitosan (190-310 KDa) and other excipients (polyvinyl alcohol, Poloxamer®407, and propylene glycol) that have proven to be compatible with each other and with curcumin in thermal analyses. The films were smooth, flexible, and precipitates free, with uniform weight and thickness, pH compatible with the oral mucosa, resistance to traction, and entrapped curcumin in a high proportion. They also exhibited necessary swelling and mucoadhesion for tissue adherence. Ex vivo penetration studies proved that the films significantly increased the penetration of curcumin into the oral mucosa compared to control, even when the mucosa was subjected to a condition of simulated salivation. Curcumin exhibited cytotoxic activity in vitro in the two head and neck cancer cell lines (FaDu, SCC-9) at doses close to those found in penetration studies with the films. When combined with radiotherapy, curcumin demonstrated superiority over single doses of radiotherapy at 4, 8, and 12 Gy. Therefore, the developed films may represent a promising alternative for the topical treatment of oral tumors.

Assessment of Antimicrobial and Cytotoxic Activities of Liposomes Loaded with Curcumin and Lippia origanoides Essential Oil.

(1) Introduction: Curcumin and Lippia origanoides essential oils have a broad spectrum of biological activities; however, their physicochemical instability, low solubility, and high volatility limit their therapeutic use. Encapsulation in liposomes has been reported as a feasible approach to increase the physicochemical stability of active substances, protect them from interactions with the environment, modulate their release, reduce their volatility, improve their bioactivity, and reduce their toxicity. To date, there are no reports on the co-encapsulation of curcumin and Lippia origanoides essential oils in liposomes. Therefore, the objective of this work is to prepare and physiochemical characterize liposomes loaded with the mixture of these compounds and to evaluate different in vitro biological activities. (2) Methods: Liposomes were produced using the thin-layer method and physiochemical characteristics were calculated. The antimicrobial and cytotoxic activities of both encapsulated and non-encapsulated compounds were evaluated. (3) Results: Empty and loaded nanometric-sized liposomes were obtained that are monodisperse and have a negative zeta potential. They inhibited the growth of Staphylococcus aureus and did not exhibit cytotoxic activity against mammalian cells. (4) Conclusions: Encapsulation in liposomes was demonstrated to be a promising strategy for natural compounds possessing antimicrobial activity.

PLGA-LEC/F127 hybrid nanoparticles loaded with curcumin and their modulatory effect on monocytes.

Aim: To investigate the effect of surfactant type on curcumin-loaded (CUR) PLGA nanoparticles (NPs) to modulate monocyte functions. Materials & methods: The nanoprecipitation method was used, and PLGA NPs were designed using Pluronic F127 (F127) and/or lecithin (LEC) as surfactants. Results: The Z-average of the NPs was <200 nm, they had a spherical shape, Derjaguin-Muller-Toporov modulus >0.128 MPa, they were stable during storage at 4°C, ζ-potential ∼-40 mV, polydispersity index <0.26 and % EE of CUR >94%. PLGA-LEC/F127 NPs showed favorable physicochemical and nanomechanical properties. These NPs were bound and internalized mainly by monocytes, suppressed monocyte-induced reactive oxygen species production, and decreased the ability of monocytes to modulate T-cell proliferation. Conclusion: These results demonstrate the potential of these NPs for targeted therapy.

This study explores how different surfactants affect curcumin-loaded PLGA nanoparticles, a biodegradable polymer. The nanoparticles were designed using Pluronic F127 and/or lecithin as surfactants. They are less than 200 nm and spherical. They are stable when stored at 4 °C, with a surface charge of about -40 mV, and can encapsulate more than 94% of curcumin.The results of this study are promising, showing that PLGA nanoparticles using a mixture of lecithin and Pluronic F127 as surfactants have favorable properties toward monocyte adhesion. They are primarily taken up by monocytes, a type of white blood cell, and demonstrate a remarkable ability to reduce the production of reactive oxygen species, which can cause cell damage, as well as the ability of monocytes to stimulate the proliferation of T cells. This underscores the potential of these nanoparticles in targeted therapy, particularly in diseases where monocytes play a pivotal role, such as chronic inflammatory conditions.

Rational Design of Molecularly Imprinted Polymers for Curcuminoids Binding: Computational and Experimental Approaches for the Selection of Functional Monomers.

Molecularly imprinted polymers (MIPs) have emerged as bespoke materials with versatile molecular applications. In this study, we propose a proof of concept for a methodology employing molecular dynamics (MD) simulations to guide the selection of functional monomers for curcuminoid binding in MIPs. Curcumin, demethoxycurcumin, and bisdemethoxycurcumin are phenolic compounds widely employed as spices, pigments, additives, and therapeutic agents, representing the three main curcuminoids of interest. Through MD simulations, we investigated prepolymerization mixtures composed of various functional monomers, including acrylamide (ACA), acrylic acid (AA), methacrylic acid (MAA), and N-vinylpyrrolidone (NVP), with ethylene glycol dimethacrylate (EGDMA) as the cross-linker and acetonitrile as the solvent. Curcumin was selected as the template molecule due to its structural similarity to the other curcuminoids. Notably, the prepolymerization mixture containing NVP as the functional monomer demonstrated superior molecular recognition capabilities toward curcumin. This observation was supported by higher functional monomer molecules surrounding the template, a lower total nonbonded energy between the template and monomer, and a greater number of hydrogen bonds in the aggregate. These findings suggest a stronger affinity between the functional monomer NVP and the template. We synthesized, characterized, and conducted binding tests on the MIPs to validate the MD simulation results. The experimental binding tests confirmed that the MIP-NVP exhibited higher binding capacity. Consequently, based on MD simulations, our computational methodology effectively guided the selection of the functional monomer, leading to MIPs with binding capacity for curcuminoids. The outcomes of this study provide a valuable reference for the rational design of MIPs through MD simulations, facilitating the selection of components for MIPs. This computational approach holds the potential for extension to other templates, establishing a robust methodology for the rational design of MIPs.

One-step synthesis of amphiphilic copolymers PDMS-b-PEG using tris(pentafluorophenyl)borane and subsequent study of encapsulation and release of curcumin.

A series of amphiphilic block copolymer (BCP) micelles based on poly(dimethylsiloxane) (PDMS) and poly(ethylene glycol) (PEG) were synthesized by a one-step reaction in the presence of tris(pentafluorophenyl)borane (BCF) as a catalyst. The structural composition of PDMS-b-PEG (PR11) and PEG-b-PDMS-b-PEG (PR12) was corroborated by FTIR, 29Si NMR, and TGA. The BCPs were assembled in an aqueous solution, obtaining micelles between 57 and 87 nm in size. PR11 exhibited a higher (2.0 g L-1) critical micelle concentration (CMC) than PR12 (1.5 g L-1) due to the short chain length. The synthesized nano micelles were used to encapsulate curcumin, which is one of three compounds of turmeric plant 'Curcuma longa' with significant biological activities, including antioxidant, chemoprotective, antibacterial, anti-inflammatory, antiviral, and anti-depressant properties. The encapsulation efficiency of curcumin was 60% for PR11 and 45% for PR12. Regarding the release study, PR11 delivered 53% curcumin after five days under acidic conditions (pH of 1.2) compared to 43% at a pH of 7.4. The degradation products of curcumin were observed under basic conditions and were more stable at acidic pH. In both situations, the release process is carried out by breaking the silyl-ether bond, allowing the release of curcumin. PR11 showed prolonged release times, so it could be used to reduce ingestion times and simultaneously work as a nanocarrier for other hydrophobic drugs.

The Antitumoral Effect In Ovo of a New Inclusion Complex from Dimethoxycurcumin with Magnesium and Beta-Cyclodextrin.

Breast cancer is one of the leading causes of death in the female population because of the resistance of cancer cells to many anticancer drugs used. Curcumin has cytotoxic activities against breast cancer cells, although it has limited use due to its poor bioavailability and rapid metabolic elimination. The synthesis of metal complexes of curcumin and curcuminoids is a relevant topic in the search for more active and selective derivatives of these molecular scaffolds. However, solubility and bioavailability are concomitant disadvantages of these types of molecules. To overcome such drawbacks, the preparation of inclusion complexes offers a chemical and pharmacologically safe option for improving the aqueous solubility of organic molecules. Herein, we describe the preparation of the inclusion complex of dimethoxycurcumin magnesium complex (DiMeOC-Mg, (4)) with beta-cyclodextrin (DiMeOC-Mg-BCD, (5)) in the stoichiometric relationship 1:1. This new inclusion complex's solubility in aqueous media phosphate buffer saline (PBS) was improved by a factor of 6x over the free metal complex (4). Furthermore, 5 affects cell metabolic rate, cell morphology, cell migration, induced apoptosis, and downregulation of the matrix metalloproteinase-2 (MMP-2) and matrix metalloproteinase-9 (MMP-9), interleukin-6 (IL-6), and signal transducer and activator of transcription-3 (STAT3) expression levels on MD Anderson metastasis breast-231 cancer (MDA-MB-231) cell lines. Results of an antitumor assay in an in ovo model showed up to 30% inhibition of tumor growth for breast cancer (MDA-MB-231) when using (5) (0.650 mg/kg dose) and 17.29% inhibition with the free homoleptic metal complex (1.5 mg/kg dose, (4)). While the formulation of inclusion complexes from metal complexes of curcuminoids demonstrates its usefulness in improving the solubility and bioavailability of these metallodrugs, the new compound (5) exhibits excellent potential for use as a therapeutic agent in the battle against breast cancer.

Curcumin and quercetin co-encapsulated in nanoemulsions for nasal administration: A promising therapeutic and prophylactic treatment for viral respiratory infections.

One of the most frequent causes of respiratory infections are viruses. Viruses reaching the airways can be absorbed by the human body through the respiratory mucosa and mainly infect lung cells. Several viral infections are not yet curable, such as coronavirus-2 (SARS-CoV-2). Furthermore, the side effect of synthetic antiviral drugs and reduced efficacy against resistant variants have reinforced the search for alternative and effective treatment options, such as plant-derived antiviral molecules. Curcumin (CUR) and quercetin (QUE) are two natural compounds that have been widely studied for their health benefits, such as antiviral and anti-inflammatory activity. However, poor oral bioavailability limits the clinical applications of these natural compounds. In this work, nanoemulsions (NE) co-encapsulating CUR and QUE designed for nasal administration were developed as promising prophylactic and therapeutic treatments for viral respiratory infections. The NEs were prepared by high-pressure homogenization combined with the phase inversion temperature technique and evaluated for their physical and chemical characteristics. In vitro assays were performed to evaluate the nanoemulsion retention into the porcine nasal mucosa. In addition, the CUR and QUE-loaded NE antiviral activity was tested against a murine ß-COV, namely MHV-3. The results evidenced that CUR and QUE loaded NE had a particle size of 400 nm and retention in the porcine nasal mucosa. The antiviral activity of the NEs showed a percentage of inhibition of around 99 %, indicating that the developed NEs has interesting properties as a therapeutic and prophylactic treatment against viral respiratory infections.

Diacetylcurcumin: a novel strategy against Enterococcus faecalis biofilm in root canal disinfection.

Aim: We evaluated Diacetylcurcumin (DAC), a derivative of curcumin, for its antibacterial and antibiofilm properties against Enterococcus faecalis. Methods: Minimum inhibitory concentration (MIC) and minimum bactericidal concentration were determined, along with antibiofilm potential and toxicity in Galleria mellonella. Additionally, in silico computational analysis was performed to understand its mechanisms of action. Results & conclusion: DAC demonstrated significant antibacterial effects, with MIC and MBC values of 15.6 and 31.25 µg/ml, respectively, and reduced biofilm formation. A synergistic effect, reducing biofilm by 77%, was observed when combined with calcium hydroxide. G. mellonella toxicity tests confirmed DAC's safety at tested concentrations, suggesting its potential for use in root canal disinfection products.

Diacetylcurcumin (DAC) comes from turmeric, a natural spice often used in food. DAC may have the ability to fight germs, including the bacteria Enterococcus faecalis. We tested DAC's ability to kill E. faecalis and stopping the formation of films of the bacteria. We found that a small amount of DAC did kill E. faecalis. When used with calcium hydroxide, DAC works even better to reduce the formation of bacterial films by 77%. DAC is safe to be used on teeth, so may be a useful ingredient for preserving mouth health.

Olive oil nanoemulsion containing curcumin: antimicrobial agent against multidrug-resistant bacteria.

The present work aimed to develop, characterize, and evaluate the antibacterial and antibiofilm activity of two nanoemulsions (NEs) containing 500 µg/mL of curcumin from Curcuma longa (CUR). These NEs, produced with heating, contain olive oil (5%) and the surfactants tween 80 (5%) and span 80 (2.5%), water q.s. 100 mL, and were stable for 120 days. NE-2-CUR presented Ø of 165.40 ± 2.56 nm, PDI of 0.254, ζ of - 33.20 ± 1.35 mV, pH of 6.49, and Entrapment Drug Efficiency (EE) of 99%. The NE-4-CUR showed a Ø of 105.70 ± 4.13 nm, PDI of 0.459, ζ of - 32.10 ± 1.45 mV, pH of 6.40 and EE of 99.29%. Structural characterization was performed using DRX and FTIR, thermal characterization using DSC and TG, and morphological characterization using SEM, suggesting that there is no significant change in the CUR present in the NEs and that they remain stable. The MIC was performed by the broth microdilution method for nine gram-positive and gram-negative bacteria, as well as Klebsiella pneumoniae clinical isolates resistant to antibiotics and biofilm and efflux pump producers. The NEs mostly showed a bacteriostatic profile. The MIC varied between 125 and 250 µg/mL. The most sensitive bacteria were Staphylococcus aureus and Enterococcus faecalis, for which NE-2-CUR showed a MIC of 125 µg/mL. The NEs and ceftazidime (CAZ) interaction was also evaluated against the K. pneumoniae resistant clinical isolates using the Checkerboard method. NE-2-CUR and NE-4-CUR showed a synergistic or additive profile; there was a reduction in CAZ MICs between 256 times (K26-A2) and 2 times (K29-A2). Furthermore, the NEs inhibited these isolates biofilms formation. The NEs showed a MBIC ranging from 15.625 to 250 µg/mL. Thus, the NEs showed physicochemical characteristics suitable for future clinical trials, enhancing the CAZ antibacterial and antibiofilm activity, thus becoming a promising strategy for the treatment of bacterial infections caused by multidrug-resistant K. pneumoniae. KEY POINTS: • The NEs showed physicochemical characteristics suitable for future clinical trials. • The NEs showed a synergistic/additive profile, when associated with ceftazidime. • The NEs inhibited biofilm formation of clinical isolates.

Tetrahydrocurcumin Derivatives Enhanced the Anti-Inflammatory Activity of Curcumin: Synthesis, Biological Evaluation, and Structure-Activity Relationship Analysis.

Tetrahydrocurcumin, the most abundant curcumin transformation product in biological systems, can potentially be a new alternative therapeutic agent with improved anti-inflammatory activity and higher bioavailability than curcumin. In this article, we describe the synthesis and evaluation of the anti-inflammatory activities of tetrahydrocurcumin derivatives. Eleven tetrahydrocurcumin derivatives were synthesized via Steglich esterification on both sides of the phenolic rings of tetrahydrocurcumin with the aim of improving the anti-inflammatory activity of this compound. We showed that tetrahydrocurcumin (2) inhibited TNF-α and IL-6 production but not PGE2 production. Three tetrahydrocurcumin derivatives inhibited TNF-α production, five inhibited IL-6 production, and three inhibited PGE2 production. The structure-activity relationship analysis suggested that two factors could contribute to the biological activities of these compounds: the presence or absence of planarity and their structural differences. Among the tetrahydrocurcumin derivatives, cyclic compound 13 was the most active in terms of TNF-α production, showing even better activity than tetrahydrocurcumin. Acyclic compound 11 was the most effective in terms of IL-6 production and retained the same effect as tetrahydrocurcumin. Moreover, acyclic compound 12 was the most active in terms of PGE2 production, displaying better inhibition than tetrahydrocurcumin. A 3D-QSAR analysis suggested that the anti-inflammatory activities of tetrahydrocurcumin derivatives could be increased by adding bulky groups at the ends of compounds 2, 11, and 12.

Evaluation of the Antimicrobial Activity of a Formulation Containing Ascorbic Acid and Eudragit FS 30D Microparticles for the Controlled Release of a Curcumin-Boric Acid Solid Dispersion in Turkey Poults Infected with Salmonella enteritidis: A Therapeutic Model.

The selection of components within a formulation or for treatment must stop being arbitrary and must be focused on scientific evidence that supports the inclusion of each one. Therefore, the objective of the present study was to obtain a formulation based on ascorbic acid (AA) and Eudragit FS 30D microparticles containing curcumin-boric acid (CUR-BA) considering interaction studies between the active components carried out via Fourier transform infrared spectrometry (FTIR) and differential scanning calorimetry (DSC) to minimize antagonistic effects, and comprehensively and effectively treat turkey poults infected with Salmonella enteritidis (S. enteritidis). The DSC and FTIR studies clearly demonstrated the interactions between AA, BA, and CUR. Consequently, the combination of AA with CUR and/or BA should be avoided, but not CUR and BA. Furthermore, the Eudragit FS 30D microparticles containing CUR-BA (SD CUR-BA MP) showed a limited release of CUR-BA in an acidic medium, but they were released at a pH 6.8-7.0, which reduced the interactions between CUR-BA and AA. Finally, in the S. enteritidis infection model, turkey poults treated with the combination of AA and SD CUR-BA MP presented lower counts of S. enteritidis in cecal tonsils after 10 days of treatment. These results pointed out that the use of an adequate combination of AA and CUR-BA as an integral treatment of S. enteritidis infections could be a viable option to replace the indiscriminate use of antibiotics.

Selection and Control of Process Conditions Enable the Preparation of Curcumin-Loaded Poly(lactic-co-glycolic acid) Nanoparticles of Superior Performance.

Curcumin (CUR) is one natural bioactive compound acknowledged for diverse therapeutic activities, but its use is hindered by its poor bioavailability, fast metabolism, and susceptibility to pH variations and light exposure. Thus, the encapsulation in poly(lactic-co-glycolic acid), or PLGA, has been successfully used to protect and enhance CUR absorption in the organism, making CUR-loaded PLGA nanoparticles (NPs) promising drug delivery systems. However, few studies have focused beyond CUR bioavailability, on the environmental variables involved in the encapsulation process, and whether they could help obtain NPs of superior performance. Our study evaluated pH (3.0 or 7.0), temperature (15 or 35 °C), light exposure, and inert atmosphere (N2) incidence in the encapsulation of CUR. The best outcome was at pH 3.0, 15 °C, without light incidence, and without N2 usage. This best nanoformulation showed NP size, zeta potential, and encapsulation efficiency (EE) of 297 nm, -21 mV, and 72%, respectively. Moreover, the CUR in vitro release at pH values 5.5 and 7.4 suggested different potential applications for these NPs, one of which was demonstrated by the effective inhibition of multiple bacteria (i.e., Gram-negative, Gram-positive, and multi-resistant) in the minimal inhibition concentration assay. Besides, statistical analyses confirmed a significant impact of temperature on the NP size; in addition, temperature, light, and N2 affected the EE of CUR. Thus, the selection and control of process variables resulted in higher CUR encapsulation and customizable outcomes, ultimately enabling more economical processes and providing future scale-up guidelines.

High-shear wet agglomeration process for enriching cornstarch with curcumin and vitamin D3 co-loaded lyophilized liposomes.

Curcumin and vitamin D3 are bioactive molecules of great importance for the food industry. However, their low stability in several processing conditions hampers their proper incorporation into powdered food formulations. This study proposes the enrichment of a common raw material (cornstarch) with curcumin and vitamin D3 by using high-shear wet agglomeration. The bioactives were initially encapsulated into liposome dispersions and then subjected to lyophilization. The resulting dried vesicles were later incorporated into cornstarch by wet agglomeration using maltodextrin as the binder solution. The phospholipid content and the amount of added liposomes were evaluated to characterize the enriched cornstarch samples. The lyophilized vesicles showed a high retention rate of 99 % for curcumin and vitamin D3, while the enriched cornstarch samples retained above 96 % (curcumin) and 98 % (vitamin D3) after 30 days of controlled storage. All in all, the presence of dried liposomes improved the flowability and delayed retrogradation phenomenon in agglomerated cornstarch. Therefore, this study introduced a novel and reliable method of incorporating hydrophobic and thermosensitive molecules into powdered food formulations by using readily available materials and a straightforward high-shear wet agglomeration process.

Vanillin crosslinked chitosan films: The states of water and the effect of carriers on curcumin uptake.

In this work, chitosan chains were crosslinked with different contents of vanillin (Van), characterized and loaded with curcumin (CUR), a hydrophobic drug. Sodium dodecyl sulfate (SDS), Tween 20® (T20) and ß-cyclodextrin (ßCD) were used as curcumin carriers. Films prepared with Van 20 % yielded gel content of 70 %, swelling degree of ~23 gwater/g, bound water and capillary water, as revealed by Time-Domain Nuclear Magnetic Resonance measurements. Films prepared with higher Van contents showed small swelling degree (< 1.6 gwater/g) and hydrophobicity, making them inadequate for drug loading. UV-Vis and fluorescence spectroscopic studies indicated that Van 20 % combined with SDS and SDS/ßCD presented the highest CUR uptake (~3.0 mg/g), favored by electrostatic interactions and hydrophobic interactions. CHI and Van 20 % films did not present any cytotoxicity in human neuroblastoma SH-SY5Y cells. At pH 1.0 the films were completely soluble, pointing to their potential application as gastric delivery systems for hydrophobic drugs. Chemical compounds studied in the manuscript: Chitosan, vanillin, curcumin, ß-cyclodextrin, sodium dodecyl sulfate, polyethylene glycol sorbitan monolaurate.

Evaluation of Piperine as Natural Coformer for Eutectics Preparation of Drugs Used in the Treatment of Cardiovascular Diseases.

Piperine (PIP) was evaluated as a natural coformer in the preparation of multicomponent organic materials for enhancing solubility and dissolution rate of the poorly water-soluble drugs: curcumin (CUR), lovastatin (LOV), and irbesartan (IBS). A screening based on liquid assisted grinding technique was performed using 1:1 drug-PIP molar ratio mixtures, followed by differential scanning calorimetry (DSC) and powder X-ray diffraction (PXRD) analyses. Three eutectic mixtures (EMs) composed of CUR-PIP, LOV-PIP, and IBS-PIP were obtained. Therefore, binary phase and Tamman's diagrams were constructed for each system to obtain the exact eutectic composition, which was 0.41:0.59, 0.29:0.71, and 0.31:0.69 for CUR-PIP, LOV-PIP, and IBS-PIP, respectively. Further, bulk materials of each system were prepared to characterize them through DSC, PXRD fully, Fourier transform infrared spectroscopy (FT-IR), and solution-state nuclear magnetic resonance (NMR) spectroscopy. In addition, the contact angle, solubility, and dissolution rate of each system were evaluated. The preserved characteristic in the PXRD patterns and FT-IR spectra of the bulk material of each system confirmed the formation of EM mixture without molecular interaction in solid-state. The formation of EM resulted in improved aqueous solubility and dissolution rate associated with the increased wettability observed by the decrease in contact angle. In addition, solution NMR analyses of CUR-PIP, LOV-PIP, and IBS-PIP suggested no significant intermolecular interactions in solution between the components of the EM. Hence, this study concludes that PIP could be an effective coformer to improve the solubility and dissolution rate of CUR, LOV, and IBS.

Mono-Dendronized ß-Cyclodextrin Derivatives as Multitasking Containers for Curcumin. Impacting Its Solubility, Loading, and Tautomeric Form.

In this study, three mono-dendronized ß-cyclodextrin (ßCD) derivatives (ßCD-1G, ßCD-2G, and ßCD-3G) were used as multitasking containers of curcumin (CUR) to influence its aqueous solubility and tautomerism, both of which are related to its biological activity. We evaluated the relevant physicochemical properties of these containers associated with their potential hosting capacity. All mono-dendronized derivatives exhibited enhanced solubility in different solvents, including water, in comparison with native ßCD. Gas-phase geometry optimizations by density functional theory (DFT) confirmed that none of the dendrons blocked the passage of CUR into the ßCD cavity, and depending on the generation, different preorganization scenarios were promoted before complexation. Phase solubility diagrams showed that all the dendronized containers have superior performance for solubilizing CUR compared to native ßCD. We proved that coprecipitation is most efficient than lyophilization for forming inclusion complexes (ICs) with dendronized containers. Even though ßCD-3G with the largest 3G dendron exhibited the highest CUR loading, the complexation of CUR with ßCD-2G provided the supramolecular system that contains CUR preferentially in its diketo tautomer, which is known for its antioxidant activity.

Therapeutic Applications of Curcumin in Diabetes: A Review and Perspective.

Diabetes is a metabolic disease with multifactorial causes which requires lifelong drug therapy as well as lifestyle changes. There is now growing scientific evidence to support the effectiveness of the use of herbal supplements in the prevention and control of diabetes. Curcumin is one of the most studied bioactive components of traditional medicine, but its physicochemical characteristics are represented by low solubility, poor absorption, and low efficacy. Nanotechnology-based pharmaceutical formulations can help overcome the problems of reduced bioavailability of curcumin and increase its antidiabetic effects. The objectives of this review were to review the effects of nanocurcumin on DM and to search for databases such as PubMed/MEDLINE and ScienceDirect. The results showed that the antidiabetic activity of nanocurcumin is due to complex pharmacological mechanisms by reducing the characteristic hyperglycemia of DM. In light of these results, nanocurcumin may be considered as potential agent in the pharmacotherapeutic management of patients with diabetes.

High Yield Synthesis of Curcumin and Symmetric Curcuminoids: A "Click" and "Unclick" Chemistry Approach.

The worldwide known and employed spice of Asian origin, turmeric, receives significant attention due to its numerous purported medicinal properties. Herein, we report an optimized synthesis of curcumin and symmetric curcuminoids of aromatic (bisdemethoxycurcumin) and heterocyclic type, with yields going from good to excellent using the cyclic difluoro-boronate derivative of acetylacetone prepared by reaction of 2,4-pentanedione with boron trifluoride in THF (ca. 95%). The subsequent cleavage of the BF2 group is of significant importance for achieving a high overall yield in this two-step procedure. Such cleavage occurs by treatment with hydrated alumina (Al2O3) or silica (SiO2) oxides, thus allowing the target heptanoids obtained in high yields as an amorphous powder to be filtered off directly from the reaction media. Furthermore, crystallization instead of chromatographic procedures provides a straightforward purification step. The ease and efficiency with which the present methodology can be applied to synthesizing the title compounds earns the terms "click" and "unclick" applied to describe particularly straightforward, efficient reactions. Furthermore, the methodology offers a simple, versatile, fast, and economical synthetic alternative for the obtention of curcumin (85% yield), bis-demethoxycurcumin (78% yield), and the symmetrical heterocyclic curcuminoids (80-92% yield), in pure form and excellent yields.

Curcumin for parkinson´s disease: potential therapeutic effects, molecular mechanisms, and nanoformulations to enhance its efficacy.

Parkinson's disease (PD) is one of the most prevalent neurodegenerative disorders worldwide. It is caused by the degeneration of dopaminergic neurons from the substantia nigra pars compacta. This neuronal loss causes the dopamine deficiency that leads to a series of functional changes within the basal ganglia, producing motor control abnormalities. L-DOPA is considered the gold standard for PD treatment, and it may alleviate its clinical manifestations for some time. However, its prolonged administration produces tolerance and several severe side effects, including dyskinesias and gastrointestinal disorders. Thus, there is an urgent need to find effective medications, and current trends have proposed some natural products as emerging options for this purpose. Concerning this, curcumin represents a promising bioactive compound with high therapeutic potential. Diverse studies in cellular and animal models have suggested that curcumin could be employed for the treatment of PD. Therefore, the objective of this narrative mini-review is to present an overview of the possible therapeutic effects of curcumin and the subjacent molecular mechanisms. Moreover, we describe several possible nanocarrier-based approaches to improve the bioavailability of curcumin and enhance its biological activity.

Nano-Derived Therapeutic Formulations with Curcumin in Inflammation-Related Diseases.

Due to its vast therapeutic potential, the plant-derived polyphenol curcumin is utilized in an ever-growing number of health-related applications. Here, we report the extraction methodologies, therapeutic properties, advantages and disadvantages linked to curcumin employment, and the new strategies addressed to improve its effectiveness by employing advanced nanocarriers. The emerging nanotechnology applications used to enhance CUR bioavailability and its targeted delivery in specific pathological conditions are collected and discussed. In particular, new aspects concerning the main strategic nanocarriers employed for treating inflammation and oxidative stress-related diseases are reported and discussed, with specific emphasis on those topically employed in conditions such as wounds, arthritis, or psoriasis and others used in pathologies such as bowel (colitis), neurodegenerative (Alzheimer's or dementia), cardiovascular (atherosclerosis), and lung (asthma and chronic obstructive pulmonary disease) diseases. A brief overview of the relevant clinical trials is also included. We believe the review can provide the readers with an overview of the nanostrategies currently employed to improve CUR therapeutic applications in the highlighted pathological conditions.