Maintenance of postharvest quality of 'Palmer' mango coated with biodegradable coatings based on cassava starch and emulsion of lemongrass essential oil.

This study aimed to evaluate the effect of applying oxidized cassava starch-based edible coatings with addition of lemongrass essential oil emulsion on 'Palmer' mangoes stored under refrigeration. A completely randomized design was used, arranged in a 5 × 3 factorial scheme, with five types of coatings and three evaluation times. The evaluated postharvest quality parameters consisted of weight loss, pulp and peel firmness, biochemical transformations related to pigments, and pulp and peel coloration of mango. The application of edible coatings with a 0.9 % EO concentration resulted in delayed fruit ripening, evidenced mainly by a 7.25 % reduction in weight loss, a 29.23 % increase in soluble solids content, and a 24.15 % decrease in total chlorophyll, when compared to uncoated fruits, which showed 19.8 %, 48.66 %, and 82.00 %, respectively, over the storage period. This effect was also evident in the angle Hue (°h) measurement, with uncoated fruits showing a decrease of 32.2 %. The antimicrobial effect and absence of anthracnose symptoms were observed in the fruits in which the coating with 0.9 % EO was applied. Therefore, biodegradable coating with the addition of 0.9 % emulsion EO, can be used as postharvest treatments for maintenance quality of 'Palmer' mangoes during refrigerated storage.

"Development and characterization of edible films based on starch isolated from different Colombian potato varieties".

This work reports on the extraction and characterization of the behavior of starch from residues of several potato varieties (Criolla, Sabanera and Pastusa) of Colombian origin from the Andean region using different techniques and the evaluation of the effect of citric acid (CA) on the grain morphology. Additionally, films were produced with each one of the extracted starches and glycerol. Pastusa variety starch shows a higher granule size than the other varieties and Pastusa starch shows lower amylose content compared to Sabanera and Criolla. Criolla and Pastusa starches exhibit more thermal stability than Sabanera starch. Starch-glycerol films were also produced using the cast solving method. The films were mechanically analyzed by tensile test and the barrier properties were assessed by water vapor permeability (WVP). The tensile strength of the films varied in the 2.0-2.4 MPa range, while the elongation at break was comprised between 25 and 32 %. With regard to water vapor permeability, the obtained values fall within the 4-7 × 10-10 g m-1 s-1 Pa-1 range. It was observed that the thickness of the films and the protein content affected water vapor permeability, increasing this value at higher levels of thickness.

Spray dried acerola (Malpighia emarginata DC) juice particles to produce phytochemical-rich starch-based edible films.

This study aimed to produce spray dried acerola juice microparticles with different protein carriers to be incorporated into edible starch films. The microparticles were evaluated for solids recovery, polyphenol retention, solubility, hygroscopicity, particle size distribution, X-ray diffraction, phytochemical compounds and antioxidant activity. Acerola microparticles produced with WPI/hydrolysed collagen carriers (AWC) with higher solids recovery (53.5 ± 0.34% w/w), polyphenol retention (74.4 ± 0.44% w/w), high solubility in water (85.2 ± 0.4% w/w), total polyphenol content (128.45 ± 2.44 mg GAE/g) and good storage stability were selected to produce starch-based films by casting. As a result, cassava films with water vapour permeability of 0.29 ± 0.07 g mm/m2 h KPa, polyphenol content of 10.15 ± 0.22 mg GAE/g film and DPPH radical scavenging activity of 6.57 ± 0.13 µM TE/g film, with greater migration of polyphenol to water (6.30 ± 0.52 mg GAE/g film) were obtained. Our results show that the incorporation of phytochemical-rich fruit microparticles is a promising strategy to create biodegradable edible films.

Whey/collagen protein blend AWC was the best wall material for acerola encapsulation.Spray dried protein-acerola particles were used to formulate edible films.Water soluble phenolic-rich AWC films with antioxidant properties were produced.Acerola phenolics from starch films migrated more to water than to acid media.

Films properties of QPM corn starch with Delonix regia seed galactomannan as an edible coating material.

Plant-based polysaccharides are considered a good alternative for obtaining edible films and coatings. In this research the objective was to determine the physicochemical characteristics of corn starch obtained from QPM Sac-Beh (SBCS) and Delonix regia galactomannan (DRG) and use them to produce films. Films were elaborated from 1 %(w/v) film-forming solutions (FFS) with SBCS:DRG 1:0, 1:1, and 0:1 ratio. Some films were prepared with glycerol 0.4 %(w/v) and vanillin 0.1 %(w/v). SBCS and DRG were characterized by infrared spectroscopy, X-ray diffraction, scanning electron microscopy and differential scanning calorimetry. SBCS presented low crystallinity which agrees with a low gelatinization ΔH observed. The SBCS:DRG 1:0 FFS without glycerol did not form films; however, DRG addition allows film formation. It was also found that glycerol addition reduced tensile strength to 10.3 MPa, from 41.3 MPa. The lowest water vapor permeability was found in films with 1:1 SBCS:DRG and 0.1 %(w/v) vanillin. This formulation was used to coat D'Anjou pears. This coating conserved the pears' color for 24 days while the control ones started to get a brown color on day 6. Based on the results obtained, FFS elaborated with 1:1 SBCS:DRG and 0.1 %(w/v) vanillin had potential use as edible film material for coating on climacteric fruits preservation.

Antifungal edible coatings for fruits based on zein and chitosan nanowhiskers.

Fresh produce have a more limited shelf life than processed ones. Their sensory attributes such as appearance and surface texture are important features in consumer perception and liking. The decomposition of fresh produce, which is caused by enzymes, chemical reactions, and microbial infections, often caused by Colletotrichum species, is inevitable. However, it can be slowed down. Several materials have been developed for this purpose, with an emphasis on active coatings using nanomaterials. In this study, the protective effects of a zein coating containing chitosan nanowhiskers (CSW) for the maintenance of fruit quality were investigated using guava (Psidium guajava L.) as a model fruit. CSW were previously characterized, and their antifungal effects against distinct Colletotrichum species (Colletotrichum asianum, Colletotrichum tropicale, Colletotrichum gloeosporioides, and Colletotrichum brevisporum) were proven. Coatings were characterized by thermogravimetric analysis, optical profilometry, and mechanical properties. Total soluble solids, pH, mass loss, and visual inspection of uncoated and coated guava fruits were also verified during 9 days. Results show that CSW length and aspect ratio decreased for longer extraction times. A similar behavior was found for x-ray diffraction in which peak intensity decreases under the same conditions. CSW degradation (ca. 250-400°C) also depends on extraction time in which more crystalline whiskers are the most thermally stable ones. The addition of CSW did not significantly (p < 0.05) modify the homogeneity and continuity of coating but prevented microbial growth assuring fruit quality during storage. In summary, coatings protected guava fruits from post-harvest spoilage while preserving quality and extending shelf life. PRACTICAL APPLICATION: Fresh foods such as fruits and vegetables have a more limited shelf life than processed ones.

Application of chickpea-based edible coating with chickpea husk polyphenols on the preservation of sunflower seeds.

The objective of this study was to evaluate the protective effect of a chickpea-based edible coating with the addition of polyphenols on the chemical, microbiological, and sensory quality of roasted sunflower seeds throughout storage. Four different samples were prepared: roasted sunflower seeds (control sample, SF-C), roasted sunflower seeds with BHT (SF-BHT), roasted sunflower seeds with chickpea-based coating (SF-CCs), and roasted sunflower seeds with chickpea-based coating with chickpea polyphenolic extract (SF-CCPE). The samples were stored for 60 days at room temperature, and their chemical, microbiological, and sensory parameters were analyzed. The acceptability of fresh samples was also studied. The use of chickpea-based coatings retarded the lipid oxidation process efficiently, but the inclusion of chickpea polyphenols in the coating enhanced the protective effect. At 60th day of storage, no statistically significant differences were found between SF-CCPE and SF-BHT in relation to peroxides and conjugated dienes values, saturated/unsaturated ratio, and hexanal content. Linoleic acid content was reduced significantly more in SF-CCs than SF-CCPE. The addition of chickpea coating with chickpea antioxidants did not modify the flavor of the sunflower seeds and was the most accepted treatment by the consumer. The formation of undesirable flavors (cardboard and oxidized) was less in SF-CC, SF-CCPE, and SF-BHT without finding significant differences between these treatments. None of the samples presented microbiological contamination or an increase in bacteria, yeast, and molds during storage. The chickpea-based coating was able to retard lipid oxidation in roasted sunflower seeds, proving to be a good alternative as a natural method to preserve foods with high lipid content. PRACTICAL APPLICATION: Discarded chickpeas and chickpea husks constitute byproducts from the chickpea industry. The grain husks are currently discarded or marketed at a very low cost, constituting a novel residue with antioxidant properties. Considering the growing interest in sustainability and the circular economy, this investigation proposes the utilization of nutritional materials to prepare edible coatings. The chickpea-based coatings loaded with polyphenol extract (obtained from the husk of chickpea) demonstrated to have a protective effect against lipid oxidation process in sunflower seeds, which represent a good alternative to be used for the food industry to increase the shelf life of lipid foods.

Edible coatings on the post-harvest conservation of orange 'Natal CNPMF 112 / Revestimentos comestíveis na conservação pós-colheita da laranja 'Natal CNPMF 112'

Citrus fruit have a lengthy post-harvest lifetime, however owing to water loss, they lose firmness and luster on the skin after being picked. In light of the foregoing, this study aimed to assess the effects of coatings on the post-harvest conservation of 'Natal CNPMF 112' oranges under refrigerated settings using aqueous and alcoholic propolis extracts and carnauba wax. Fruit of 'Natal CNPMF 112' orange tree grafted on 'Rangpur' lime were treated with carnauba wax (100%) and alcoholic and aqueous propolis extracts (30%). The experimental design was totally randomized, with the plots consisting of the coatings plus the control (distilled water), and the subplots separated by the storage time (0, 10, 20, and 30 days) at 12 ºC ± 2, with the exception of weight loss, which was assessed at three-day intervals (0 to 30 days). Loss of fruit mass, average fruit mass, soluble solids, titratable acidity, ascorbic acid, maturity index, pH, and technical index were all examined. According to the findings, the alcoholic extract of propolis produced decreased fruit mass loss, a high maturity index, and balanced acidity. The coatings used in the postharvest conservation of refrigerated 'Natal CNPMF 112' oranges had no effect on the other parameters. As a result, propolis alcoholic extract is suggested for the preservation of 'Natal CNPMF 112' orange.

Os frutos cítricos apresentam prolongado período pós-colheita, no entanto, devido à perda de água, após colhidos, perdem a firmeza e ficam com pouco brilho na casca. Face ao exposto, objetivou-se neste trabalho determinar os efeitos dos revestimentos na conservação pós-colheita da laranja 'Natal CNPMF 112' com utilização de extratos de própolis aquoso e alcoólico e a cera de carnaúba em condição refrigerada. Frutos da laranjeira 'Natal CNPMF 112', enxertada em limoeiro 'Cravo', foram tratados com cera de carnaúba (100%) e extratos de própolis alcoólico e aquoso (30%). O delineamento experimental foi inteiramente casualizado, com arranjo em parcelas subdivididas, sendo as parcelas constituídas pelos revestimentos mais a testemunha (água destilada), e as subparcelas pelo período de armazenamento (0, 10, 20 e 30 dias) a 12 ºC ± 2, com exceção para perda de massa, a qual foi avaliada a intervalos de três dias (0 a 30 dias). Avaliaram-se: perda de massa dos frutos, massa média dos frutos, sólidos solúveis, acidez titulável, ácido ascórbico, índice de maturação, pH e índice tecnológico. Conforme os resultados, observou-se que o extrato alcoólico de própolis promoveu menor perda de massa do fruto, bom índice de maturação e acidez equilibrada. As demais características não foram afetadas pelos revestimentos utilizados na conservação pós-colheita da laranja 'Natal CNPMF 112' refrigerada. Portanto, recomenda-se o extrato alcoólico de própolis para a conservação da laranja 'Natal CNPMF 112'.

Synthesis and characterization of chitosan/montmorillonite nanocomposites for application as edible coating.

Edible coating can improve fruits shelf life and, consequently, reduce their waste. Chitosan, which presents a potential for chemical modifications and capacity to form films, can be an alternative for coating due to its biocompatibility, biodegradability, and antimicrobial properties. Chitosan film can be obtained through casting method presenting suitable mechanical properties, such as resistance to traction and elongation, ability to adhere to surfaces and selective permeability to gases, such as O2 and CO2. However, it is highly permeable to water vapor, which can limit its potential coating use. The properties of chitosan films can be improved through the formation of composites by inserting nanoclays as montmorillonite in the polymeric matrix. The objective of this study was to develop and characterize chitosan/montmorillonite nanocomposites for fruit coating aiming for future applications in the field of smart packaging. Nanocomposites were characterized by its microstructure, thermal, mechanical, and physicochemical properties. X-ray diffraction analysis indicated changes in crystallinity with the insertion of montmorillonite. Nanocomposites became more transparent and significantly reduced its water permeability rate with 0.5% w/w montmorillonite addition. Elastic rigidity and tensile strength of the films were improved. Chitosan/montmorillonite nanocomposites demonstrated the potential to improve the storage time of Williams pears.

Active edible films based on green tea extract and gelatin for coating of fresh sausage.

The objective of this work was to develop, characterize and evaluate the application of active edible films based on gelatin and green tea extract in coating of fresh sausages. The green tea extract showed IC50 of 0.088 mg/mL and minimum inhibitory concentrations of 0.05 mg/mL for Listeria monocytogenes, 0.025 mg/mL for Staphylococcus aureus, 0.04 mg/mL for Escherichia coli, and >1.0 mg/mL for Salmonella enterica serovar Choleraesuis. The formulation with 15% (w/v) of gelatin and 30% (w/w) of glycerol showed better adhesion and appearance in the coating of the product. When using 1.0% of green tea extract, the lowest IC50, was obtained and the antioxidant activity was maintained for 35 days. There was a more accentuated decrease in pH and an increase in acidity and peroxide index in fresh sausages without film compared to those coated with the active film (1.0% of green tea extract) during storage. In addition, it was found that the use of active gelatin film (1.0% of green tea extract) kept the TBARS indexes of fresh sausage samples lower than the standard (without coating) and of films containing only gelatin, after 48 days of storage.

Edible Bioactive Film with Curcumin: A Potential "Functional" Packaging?

Edible packaging has been developed as a biodegradable and non-toxic alternative to traditional petroleum-based food packaging. Biopolymeric edible films, in addition to their passive protective function, may also play a bioactive role as vehicles for bioactive compounds of importance to human health. In recent years, a new generation of edible food packaging has been developed to incorporate ingredients with functional potential that have beneficial effects on consumer health. Curcumin, a bioactive compound widely used as a natural dye obtained from turmeric rhizomes (Curcuma longa L.), has a broad spectrum of beneficial properties for human health, such as anti-inflammatory, anti-hypertensive, antioxidant, anti-cancer, and other activities. To demonstrate these properties, curcumin has been explored as a bioactive agent for the development of bioactive packaging, which can be referred to as functional packaging and used in food. The aim of this review was to describe the current and potential research on the development of functional-edible-films incorporating curcumin for applications such as food packaging.

Meat with edible coating: Acceptance, purchase intention and neophobia.

The acceptance of a new product depends on its sensory quality and consumers' physiological and psychological aspects. The fear of consuming foods processed by new technologies is an example. This study aimed to investigate the overall acceptance and purchase intention of chitosan-coated beef and lamb meat in blind and informed conditions and to estimate the psychometric properties using the Food Technology Neophobia Scale (FTNS). Beef and lamb meat samples were evaluated for overall acceptance (1 = extremely disliked, 9 = extremely liked) and purchase intention (1 = certainly would not buy, 5 = certainly would buy). A questionnaire containing the Food Technology Neophobia Scale (FTNS) was applied, and sociodemographic data were collected, and 297 consumers participated in this study. For beef, chitosan-coated in the informed condition was the most accepted. In contrast, for lamb meat, the overall acceptance values of control and chitosan treatments in the blind condition were higher than the samples in the informed condition. However, cluster analysis indicated three clusters of consumers with different perceptions for both types of meat. The original FTNS showed factorial invariance, and the abbreviated scale (AFTNS) was used. The final AFTNS model showed good adjustment index (λ = 0.41 - 0.73; χ2 / gl = 3.5; CFI = 0.93; TLI = 0.90; RMSEA = 0.09) and had 8 items. For most consumers in this study, an absence of neophobia was observed (71.1%), indicating that the chitosan-coated meat would potentially be commerced.

Optimization of the Physical, Optical and Mechanical Properties of Composite Edible Films of Gelatin, Whey Protein and Chitosan.

The aim of this work was to evaluate the effect of the concentration of gelatin (G) (3-6 g), whey protein (W) (2.5-7.5 g) and chitosan (C) (0.5-2.5 g) on the physical, optical and mechanical properties of composite edible films (CEFs) using the response surface methodology (RSM), as well as optimizing the formulation for the packaging of foods. The results of the study were evaluated via first- and second-order multiple regression analysis to obtain the determination coefficient values with a good fit (R ˃ 0.90) for each of the response variables, except for the values of solubility and b*. The individual linear effect of the independent variables (the concentrations of gelatin, whey protein and chitosan) significantly affected (p ≤ 0.05) the water vapor permeability (WVP), strength and solubility of the edible films. The WVP of the edible films varied from 0.90 to 1.62 × 10-11 g.m/Pa.s.m2, the resistance to traction varied from 0.47 MPa to 3.03 MPa and the solubility varied from 51.06% to 87%. The optimized values indicated that the CEF prepared with a quantity of 4 g, 5 g and 3 g of gelatin, whey protein and chitosan, respectively, provided the CEF with a smooth, continuous and transparent surface, with L values that resulted in a light-yellow hue, a lower WVP, a maximum strength (resistance to traction) and a lower solubility. The results revealed that the optimized formulation of the CEF of G-W-C allowed a good validation of the prediction model and could be applied, in an effective manner, to the food packaging industry, which could help in mitigating the environmental issues associated with synthetic packaging materials.

Long-Term Refrigerated Storage of Beef Using an Active Edible Film Reinforced with Mesoporous Silica Nanoparticles Containing Oregano Essential Oil (Lippia graveolens Kunth).

Beef is a fundamental part of the human diet, but it is highly susceptible to microbiological and physicochemical deterioration which decrease its shelf life. This work aimed to formulate an active edible film (AEF) incorporated with amino-functionalized mesoporous silica nanoparticles (A-MSN) loaded with Mexican oregano (Lippia graveolens Kunth) essential oil (OEO) and to evaluate its effect as a coating on fresh beef quality during refrigerated storage. The AEF was based on amaranth protein isolate (API) and chitosan (CH) (4:1, w/w), to which OEO emulsified or encapsulated in A-MSN was added. The tensile strength (36.91 ± 1.37 MPa), Young's modulus (1354.80 ± 64.6 MPa), and elongation (4.71%) parameters of AEF made it comparable with synthetic films. The antimicrobial activity of AEF against E. coli O157:H7 was improved by adding 9% (w/w) encapsulated OEO, and interactions of glycerol and A-MSN with the polymeric matrix were observed by FT-IR spectroscopy. In fresh beef, after 42 days, AEF reduced the population growth (Log CFU/cm2, relative to uncoated fresh beef) of Brochothrix thermosphacta (5.5), Escherichia coli (3.5), Pseudomonas spp. (2.8), and aerobic mesophilic bacteria (6.8). After 21 days, odor acceptability of coated fresh beef was improved, thus, enlarging the shelf life of the beef and demonstrating the preservation capacity of this film.

Effect of Edible Onion (Allium cepa L.) Film on Quality, Sensory Properties and Shelf Life of Beef Burger Patties.

The production of edible film from onion (Allium cepa L.) to be applied as packaging is attractive, due to its chemical properties and biodegradable characteristics. Thus, we tested the hypothesis that edible onion film can positively influence the sensory properties, quality and increasing shelf life of beef burgers patties. The experiment was designed in a 4 × 2 factorial scheme, with two treatments (beef burgers patties with or without edible onion film) at an interval of four storage times (0, 3, 6 and 9 days) at 4 °C. The uncoated burger patties (control) suffered the most intense color modifications during the storage (p < 0.05). The luminosity index was higher (p < 0.05) in the control at all storage times, except at day 6, and redness, yellowness and chrome were higher (p < 0.05) in the edible onion film patties at all storage times. The pH of the beef burger patties was lower (p < 0.05) at all storage times when the edible onion film was applied. For the texture profile, only the chewiness was affected, as the inclusion of the edible onion film improved the chewing of the beef burgers patties over the storage time (p < 0.05). Additionally, there was an inhibition of the microbial growth of mesophiles and psychrophiles with the application of the edible onion film in beef burgers patties. The use of edible onion film improved the perception of panelists for the variables texture, color, flavor, odor and overall appearance, and increased the preference of panelists. The edible onion film is recommended for preserving beef burgers patties, as it delays the proliferation of unwanted microorganisms, stabilizes and improves the color parameters and sensory attributes, and increases the overall acceptance of the consumer.

Nanocomplexes based on egg white protein nanoparticles and bioactive compounds as antifungal edible coatings to extend bread shelf life.

This work is aimed to obtain nanocomplexes based on egg white protein nanoparticles (EWPn) and bioactive compounds (BC), carvacrol (CAR), thymol (THY) and trans-cinnamaldehyde (CIN), and evaluate their application as antifungal edible coatings on preservative-free breads. The nanocomplex formation was studied through stoichiometry, affinity, colloidal behavior, morphology, and encapsulation efficiency (EE, %). Rounded-shape nanocomplexes with particle sizes < 100 nm were obtained. The EE values were similar for all BC (>83%). Furthermore, the in vitro antifungal activity of the nanocomplexes was verified using the Aspergillus niger species. The nanocomplexes were applied as coatings onto the crust of preservative-free breads, which were stored for 7 days (at 25 °C). The coatings had no impact on the physicochemical properties of the bread loaves (moisture, aw, texture, and color). Finally, the coatings based on EWPn-THY and EWPn-CAR nanocomplexes showed higher antifungal efficacy, extending the bread shelf life after 7 days.

Edible coatings and films with incorporation of prebiotics -A review.

Prebiotics are compounds naturally present in some foods or can be synthesized by microorganisms and enzymes. Among the benefits associated with prebiotic consumption are the modulation of the intestinal microbiota that increase the production of short chain fatty acids and prevent the development of some disorders such as colon cancer, irritable bowel syndrome, diabetes, obesity, among others. Traditionally, prebiotics have been used in diverse food formulations to enhance their healthy potential or to improve their technological and sensory properties. However, different alternatives for the production of prebiotic products are being explored, such as edible coatings and films. Therefore, this review aims to highlight recent research on edible coatings and films incorporated with different prebiotics, the concept of prebiotics, the general characteristics of these materials, and the main production methods, as well as presenting the perspectives of uses in the food industry. Current works describe that polyols and oligosaccharides are the most employed prebiotics, and depending on their structure and concentration, they can also act as film plasticizer or reinforcement agent. The use of prebiotic in the coating can also improve probiotic bacteria survival making it possible to obtain fruits and vegetables with synbiotic properties. The most common method of production is casting, suggesting that other technologies such as extrusion can be explored aiming industrial scale. The use of film and coating carried of prebiotic is an emerging technology and there are still several possibilities for study to enable its use in the food industry. This review will be useful to detect the current situation, identify problems, verify new features, future trends and support new investigations and investments.

Edible Coating with Jambolan (Syzigium cumini L.) Peel and Leaf Extracts to Reduce Color Changes, Mass Loss and to Increase ß-Carotene Retention of Minimally Processed Papaya.

The aim of the study was to evaluate the effect of the jambolan (Syzigium cumini L.) peel and leaves extract added in pectin based edible coating onto color changes, mass loss and ß-carotene retention of minimally processed papaya during storage at 5 ±2 °C for 9 days. Leaves and peels were crushed in water in solid:liquid ratio, 1:1.5 and 1:2.0 and filtrered to obtain vegetable extracts. After, aqueous solutions were prepared adding 2% of pectin and 5% of extract. The mass loss increasing in all treatments evaluated in this work, being that in the final of 9 days of storage, control and P2 (peel 2%) treatment presented the highest loss, 6.23 and 10.12% respectively. The L1.5 (leaf 1.5%) treatment was the one presented the lowest percentage of mass loss (3.8%). The values of () of the control samples reduced significantly during the storage period, reaching 21% of reduction after 9 days. Coating with vegetable extract from jambolan peel and leaf reduced the loss of ß-carotene in minimally processed papaya during the storage, being that the treatment P1.5 provided the highest retention value of the compound. The results demonstrated that the studied coating set with extracts (peel and leaves) of jambolan, was efficient to preserve the color, the mass loss and the ß-carotene content of the minimally processed papaya.

Nopal cladode as a novel reinforcing and antioxidant agent for starch-based films: A comparison with lignin and propolis extract.

The potential use of nopal cladode flour (NC) as reinforcing/bioactive agent in cassava starch-based films was evaluated and compared with the use of propolis extract or lignin, which are commonly used for these purposes. Cassava starch-based films containing untreated NC (S-NC), NC treated at pH 12 (S-NC12), aqueous propolis extract at two different concentrations (SP1 or SP2), or lignin (S-L) were produced by the casting technique; glycerol was used as plasticizer. NC12 and NC affected the mechanical properties of the cassava starch-based film similarly as compared to propolis extract and lignin. Moreover, NC and NC12 had different performance as reinforcing and antioxidant agent in cassava starch-based film. Thus, S-NC12 film was more elongable (28.5 ± 6.5%), more hydrophobic (contact angle: 70.8° ± 0.1), less permeable to water vapor (0.8 ± 0.0 × 10-10 g·m-1·s-1·Pa-1) and had better antioxidant activity by ABTS•+ (44.70 ± 0.3 µM Trolox·g-1 of film) than the S-NC film. SEM and TGA analysis of films showed that NC12 was better incorporated into the cassava starch matrix than NC, lignin and propolis extract. Overall, nopal cladode flour has potential use in the production of active biodegradable packaging for the food preservation with high oxidation rate.

Antioxidant films and coatings based on starch and phenolics from Spondias purpurea L.

The objective of this study was to prepare, for the first time, active films and coatings from fruit starch (SPFS) and phenolic stem bark extract (SBPE) from Spondias purpurea L. Starch film formulations were prepared with different SBPE contents (5-20 wt% on starch), then cast and dried into films. SBPE showed higher antioxidant activity and antimicrobial activity against both Gram-negative and Gram-positive bacteria. Chemical, morphological, thermal, optical, mechanical, and barrier properties were studied for SPFS-SBPE films. In general, the phenolic extract caused significant changes in starch films (especially when in excess), such as gradual reduction of elastic modulus and tensile strength, increased elongation, opacity, and thermal properties (e.g. glass transition and melting enthalpy). On the other hand, SBPE provided the films with active properties (antioxidant and UV-absorbing). Coatings were applied to minimally processed mangoes (MPM), which were stored for 10 days at 12 °C. SBPE-containing coatings provided better protective action, reducing the total color difference (∆E⁎) and delaying the browning index (BI) during storage as well as reducing fungus attack. The active SPFS-SBPE films showed great potential as environmentally friendly active films and coatings.

Sunflower seed byproduct and its fractions for food application: An attempt to improve the sustainability of the oil process.

The sunflower (Helianthus annus L.) is one of the main oil crops in the world grown for the production of edible and biodiesel oil. Byproducts of the extraction of sunflower oil constitute a raw material with potential for several applications in the food area due to its chemical composition, including the high content of proteins and phenolic compounds. Thoughtful of a consumer increasingly concerned with the environmental impact, we try to clarify in this review the potential of using sunflower seed byproducts and their fractions to enhance the production of potentially functional foods. The applications of sunflower seed byproduct include its transformation into flours/ingredients that are capable of improving the nutritional and functional value of foods. In addition, the protein isolates obtained from sunflower seed byproduct have good technological properties and improve the nutritional value of food products. These protein isolates can be used to obtain protein hydrolysates with technological and bioactive properties and as matrices for the development of edible, biodegradable, and active films for food. The sunflower seed byproduct is also a source of phenolic compounds with bioactive properties, mainly chlorogenic acid, which can be extracted by different methods and applied in the development of functional foods and active and bioactive food packaging. The use of sunflower seed byproduct and its fractions are promising ingredients for the development of healthier and less expensive foods as well as the alternative to decrease the environmental problems caused by the sunflower oil industry.