Enhanced enzymatic electrochemical detection of an organophosphate Pesticide: Achieving Wide linearity and femtomolar detection via gold nanoparticles growth within polypyrrole films.

The indiscriminate use of pesticides in agriculture demands the development of devices capable of monitoring contaminations in food supplies, in the environment and biological fluids. Simplicity, easy handling, high sensitivities, and low limits-of-detection (LOD) and quantification are some of the required properties for these devices. In this work, we evaluated the effect of incorporating gold nanoparticles into indigo carmine-doped polypyrrole during the electropolymerization of films for use as an acetylcholinesterase (AChE) enzyme-based biosensor. As proof of concept, the pesticide methyl parathion was tested towards the inhibition of AChE. The enzyme was immobilized simply by drop-casting a solution, eliminating the need for any prior surface modification. The biosensors were characterized with cyclic voltammetry, scanning electron microscopy, transmission electron microscopy, and Raman spectroscopy. The assays for the detection of methyl parathion with films containing polypyrrole, indigo carmine and AChE (PPy-IC-AChE) presented a sensitivity of 5.7 µA cm-2 g-1 mL and a LOD of 12 nmol L-1 (3.0 ng L-1) with a linear range from 1.3 x 10-7 mol L-1 to 1.0 x 10-5 mol L-1. The introduction of gold nanoparticles (AuNP) into the film (PPy-IC-AuNP-AChE) led to remarkable improvements on the overall performance, such as a lower redox potential for the enzymatic reaction, a 145 % increase in sensitivity (14 µA cm-2 g-1 mL), a wider detection dynamic range (from 1.3x10-7 to 1.0x10-3 mol L-1), and a very low LOD of 24 fmol L-1 (64 ag mL-1). These findings underscore the potential of using AuNPs to improve the enzymatic performance of biosensor devices.

A disposable, portable electrochemical immunosensor for rapid in situ detection of bovine tuberculosis.

This contribution describes the development of a simple, fast, cost-effective, and sensitive impedimetric immunosensor for quantifying bovine tuberculosis (TB) in bovine serum samples. The construction of the immunosensor involved immobilizing the purified protein derivative (PPD) of M. bovis onto a screen-printed electrode that was modified with gold nanoparticles (AuNPs) and a polypyrrole (pPy) film synthesized electrochemically. The immunosensor exhibited a linear range from 0.5 µg mL-1 to 100 µg mL-1 and achieved a limit of detection (LD) of 100 ng mL-1 for the detection of anti-M. bovis antibody. The recovery percentages obtained in bovine serum samples were excellent, ranging between 98 % and 103 %. This device presents several advantages over alternative methods for determining TB in bovine serum samples. These include direct, in situ measurement without the need for pre-treatment, utilization of small volumes, thus avoiding harmful solvents and expensive reagents, and portability. In addition, the immunosensor exhibits both physical and chemical stability, retaining effectiveness even after 30 days of modification. This allows simultaneous incubations and facilitates large-scale detection. Hence, this immunosensor presents itself as a promising diagnostic tool for detecting anti-M. bovis antibodies in bovine serum. It serves as a viable alternative to tuberculin and ELISA tests.

Parkinson biomarker determination with an Au microflower-enhanced electrochemical immunosensor using non-Faradaic capacitance measurements.

This work comprehends the development and characterization of a carbon black-based electrode modified with Au microflowers to increase its effect as a capacitance biosensor for the determination of PARK7/DJ-1. Due to its high surface-to-volume ratio and biocompatibility, Au particles are suitable for antibody binding, and by monitoring surface capacitance, it is possible to identify the immune-pair interaction. Au microflowers allowed the adequate immobilization of Parkinsonian-related proteins: PARK7/DJ-1 and its antibody. The protein is associated with several antioxidant mechanisms, but its abnormal concentrations or mutations can be the cause of the loss of dopaminergic neurons, leading to Parkinson's disease. The device was characterized by scanning electron microscopy and cyclic voltammetry, revealing the flower-like structures and the electrochemically-interest enhancements they provide, such as increased heterogeneous electron transfer rate coefficient and electroactive area. The self-assembled monolayers of different molecules were optimized with the aid of 22 central composite experiments and a linear calibration curve was obtained between 0.700 and 120 ng mL-1 of PARK7/DJ-1, with a limit of detection of 0.207 ng mL-1. The data confirms that the addition of Au microflowers enhanced the electrochemical signal of the device, as well as allowed for the determination of an early stage Parkinson's disease biomarker with appreciable analytical performance.

Green tech soil analysis: a comparison of potentially toxic element contents among urban, agricultural, and gold mining areas in the Eastern Brazilian Amazon.

Artisanal gold mining can lead to soil contamination with potentially toxic elements (PTEs), necessitating soil quality monitoring due to environmental and human health risks. However, determining PTE levels through acid digestion is time-consuming, generates chemical waste, and requires significant resources. As an alternative, portable X-ray fluorescence (pXRF) offers a faster, more cost-effective, and sustainable analysis. This study compared total As, Ba, Cr, Cu, Fe, Mn, Ni, Pb, Sr, Ti, V, and Zn obtained from pXRF with their pseudo-total contents obtained through acid digestion (USEPA method 3051A) in areas influenced by artisanal gold mining in the Eastern Amazon, Brazil. pXRF data and machine learning algorithms were used to predict extractable Cu, Fe, Mn, and Zn. Linear regression models were fitted to compare the two methods, and random forest and support vector machine techniques were used to predict extractable contents. The best regression model fits for the pseudo-total PTE contents were those for Cu, Fe, Mn and Pb in agricultural areas (R2 > 0.80); Fe and Mn in gold mining residue (R2 > 0.70); and Ba, Cu and Mn in urban areas (R2 > 0.80). The best models for predicting the extractable PTE contents were those for Cu (R2 = 0.72; RMSE = 2.58 mg dm-3) and Zn (R2 = 0.71; RMSE = 1.44 mg dm-3) in agricultural areas and for Zn (R2 = 0.72; RMSE = 0.43 mg dm-3) in gold mining residue. The results demonstrated that pXRF can characterize and predict PTE contents in mining-impacted areas, offering a sustainable approach to soil quality analysis.

Community engagement in mobile and hard-to-reach populations: a community-based intervention for malaria elimination in a tri-national region of the Guiana Shield.

Several countries of the Guiana Shield are aiming at the control and elimination of malaria in areas where Artisanal and Small-scale Gold Mining (ASGM) activities predominate, raising questions about how to strengthen community engagement to improve the effectiveness of health programs. The Curema project focuses its intervention on the mobile and hard-to-reach ASGM population, complementing the efforts of national programs in the Guiana Shield. The Curema intervention combines targeted drug administration for suspected Plasmodium vivax asymptomatic carriers, the Malakit distribution, and health education activities. The primary goals of this manuscript are to outline a pathway to foster community participation in the Curema project aimed at eliminating malaria. Thus, it presents a vision of the challenges that the AGSM community poses in terms of community participation for an asymptomatic problem; and highlights the community-based model and the Information, Education and Communication (IEC) components as foundations for participation. In addition, it also presents culturally sensitive IEC strategies designed through iterative and collaborative consultative processes and other bottom-up outreach activities. The community engagement approach facilitates adaptability and responsiveness in a complex, evolving context increasing the effectiveness of interventions.

Diagnosis of viral infectious diseases through sensitive detection of human serum antibodies using a modified label-free electrochemical biosensor.

Rapid virus identification is crucial for preventing outbreaks. The COVID-19 pandemic has highlighted the critical nature of rapid virus detection. Here, we designed a label-free electrochemical biosensor modified with gold nanoparticles (AuNPs) to detect IgG antibodies from human serum, enabling rapid point-of-care diagnostics. AuNPs were synthesized and characterized. A multivariate optimization was carried out to determine the optimal condition for functionalizing AuNPs with anti-IgG. Subsequently, using a glassy carbon electrode (GCE), a modified AuNPs/GCE electrochemical biosensor was developed for IgG detection. The results indicated that AuNPs displayed a spherical morphology with a size distribution of 19.54 nm. Additionally, the zeta potential was recorded at -7.84 mV. Central composite design (CCD) analysis determined the optimal conditions for functionalizing AuNPs to be an anti-IgG concentration of 320 µg mL-1, a temperature of 25 °C, and pH of 7.4. The characterization study confirmed the successful synthesis and functionalization of AuNPs. Through electrochemical impedance spectroscopy measurement, the biosensor demonstrated a limit of detection (LOD) of 0.2 ng mL-1 and limit of quantification (LOQ) of 0.8 ng mL-1. Furthermore, tests in real samples showed the interaction between IgG antibodies in serum samples and AuNPs/GCE, confirming the biosensor's ability to detect and quantify IgG in clinical samples.

Proposal for a framework for environmental zoning of areas near gold mines based on the distribution of potentially toxic elements, pollution indices, and bioindicators: a case study in Antioquia, Colombia.

Gold mining, even under strict environmental regulations, inevitably causes environmental impacts and liabilities. To address this, the study proposes a framework for environmental zoning around gold mines based on the distribution of potentially toxic elements (PTEs), pollution indices, and bioindicators. Soil samples were collected from municipalities affected by gold mining projects, and concentrations of As, Cd, Pb, and Cr were measured. Then, the Pollution Load Index (PLI) was calculated. A plant model was used for the biomonitoring of PTEs, and the Plant Vigor Index (PVI) was determined. Finally, environmental zoning was proposed through geospatial analysis combining PTEs, PLI, and PVI values. The concentrations of PTEs were as follows: As ranged from 1.7 to 892, Cd from 0.1 to 65.2, Pb from 18.5 to 2345, and Cr from 5.4 to 118.4. Spearman's rank correlation showed significant relations (ρ > 0.76) between bioindicators and PTE concentrations and PLI. The PVI correlated significantly with PTE concentrations (ρ - 0.41 to - 0.67) and PLI (ρ - 0.65). The municipalities were categorized into three zones: highly contaminated, moderately contaminated, and minimally contaminated. Overall, the environmental zoning maps serve as a management tool for environmental monitoring.

Selective oxidation of glycerol mediated by surface plasmon of gold nanoparticles deposited on titanium dioxide nanowires.

This paper describes an alternative method for the in situ synthesis of gold nanoparticles (AuNPs) with a particle size of less than 3 nm, using nanoreactors formed by reverse micelles of 1,4-bis-(2-ethylhexyl) sulfosuccinate sodium (AOT) and nanoparticle stabilization with l-cysteine, which favor the preparation of nanoparticles with size and shape control, which are homogeneously dispersed (1% by weight) on the support of titanium dioxide nanowires (TNWs). To study the activity and selectivity of the prepared catalyst (AuNPs@TNWs), an aqueous solution of 40 mM glycerol was irradiated with a green laser (λ = 530 nm, power = 100 mW) in the presence of the catalyst and O2 as an oxidant at 22 °C for 6 h, obtaining a glycerol conversion of 86% with a selectivity towards hydroxypyruvic acid (HA) of more than 90%. From the control and reactions, we concluded that the Ti-OH groups promote the glycerol adsorption on the nanowires surface and the surface plasmon of the gold nanoparticles favors the selectivity of the reaction towards the hydroxypyruvic acid.

Metal(triphenylphosphine)-atovaquone Complexes: Synthesis, Antimalarial Activity, and Suppression of Heme Detoxification.

To ascertain the bioinorganic chemistry of metals conjugated with quinones, the complexes [Ag(ATV)(PPh3)2] (1), [Au(ATV)(PPh3)]·2H2O (2), and [Cu(ATV)(PPh3)2] (3) were synthesized by the coordination of the antimalarial naphthoquinone atovaquone (ATV) to the starting materials [Ag(PPh3)2]NO3, [Au(PPh3)Cl], and [Cu(PPh3)2NO3], respectively. These complexes were characterized by analytical and spectroscopical techniques. X-ray diffraction of single crystals precisely confirmed the coordination mode of ATV to the metals, which was monodentate or bidentate, depending on the metal center. Both coordination modes showed high stability in the solid state and in solution. All three complexes showed negative log D values at pH 5, but at pH 7.4, while complex 2 continued to have a negative log D value, complexes 1 and 3 displayed positive values, indicating a more hydrophilic character. ATV and complexes 1-3 could bind to ferriprotoporphyrin IX (FePPIX); however, only complexes 1-3 could inhibit ß-hematin crystal formation. Phenotype-based activity revealed that all three metal complexes are able to inhibit the growth of P. falciparum with potency and selectivity comparable to those of ATV, while the starting materials lack this activity. The outcomes of this chemical design may provide significant insights into structure-activity relationships for the development of new antimalarial agents.

Near infrared photothermal inactivation of Candida albicans assisted by plasmonic nanorods.

The use of photothermal processes has been proven effective in the control of microbial infections. Simultaneously, the localized surface plasmon resonance phenomena in metallic nanoparticles have been explored as an alternative strategy to achieve highly efficient localized heating. In this work, we propose the use of selected nanoheaters to improve the efficiency of fungal photothermal inactivation of Candida albicans through size optimization of plasmonic gold nanorods. Here, the optical heating of polyethylene glycol coated gold nanorods of varying sizes is evaluated, both theoretically and experimentally. A size-dependent computational approach was applied to identify metallic nanorods with maximized thermal performance at 800 nm, followed by the experimental comparison of optimal and suboptimal nanoheaters. Comparison among samples show temperatures of up to 53.0 °C for 41×10 nm gold nanorods against 32.3 °C for 90×25 nm, a percentage increase of ∼63% in photothermal inactivation assessments. Our findings reveal that gold nanorods of 41×10 nm exhibit superior efficiency in near-infrared (800 nm) photothermal inactivation of fungi, owing to their higher light-thermal conversion efficiency. The identification of high performance metallic nanoheaters may lead to the reduction of the nanoparticle dose used in plasmonic-based procedures and decrease the laser exposure time needed to induce cell death. Moreover, our results provide insights to better exploit plasmonic nanoparticles on photothermal inactivation protocols.

The Tunable Parameters of Graphene-Based Biosensors.

Graphene-based surface plasmon resonance (SPR) biosensors have emerged as a promising technology for the highly sensitive and accurate detection of biomolecules. This study presents a comprehensive theoretical analysis of graphene-based SPR biosensors, focusing on configurations with single and bimetallic metallic layers. In this study, we investigated the impact of various metallic substrates, including gold and silver, and the number of graphene layers on key performance metrics: sensitivity of detection, detection accuracy, and quality factor. Our findings reveal that configurations with graphene first supported on gold exhibit superior performance, with sensitivity of detection enhancements up to 30% for ten graphene layers. In contrast, silver-supported configurations, while demonstrating high sensitivity, face challenges in maintaining detection accuracy. Additionally, reducing the thickness of metallic layers by 30% optimizes light coupling and enhances sensor performance. These insights highlight the significant potential of graphene-based SPR biosensors in achieving high sensitivity of detection and reliability, paving the way for their application in diverse biosensing technologies. Our findings pretend to motivate future research focusing on optimizing metallic layer thickness, improving the stability of silver-supported configurations, and experimentally validating the theoretical findings to further advance the development of high-performance SPR biosensors.

Green synthesis of gold nanoparticles in an animal model of chronic wound induced with Resiquimod.

Cost-effective strategies for the treatment of chronic wounds must be developed. The green synthesis of gold nanoparticles (GNPs) it is possible to guarantee a lower toxicity in biological tissues and greater safety of applicability, in addition to adding the effects of nanoparticles (NPs) to those of extracts. The objective of this study was to evaluate the effects of treatment with biosynthesized GNPs in a chronic wound model. Wistar rats were distributed into 7 groups: Acute Wound (AW); Chronic wound (CW); CW + GNPs-Açaí; CW + GNPs-DB; CW + AV-GNPs; CW + SafGel®; CW + 660 nm laser. The chronic injury model was induced with topically applied Resiquimod for 6 days. Treatments were then initated on the fourteenth day after the last application of Resiquimod and carried out daily for ten days. The proposed therapies with GNPs were able to significantly reduce the inflammatory score and increase the rate of wound contraction. In histology, there was a reduction in the inflammatory infiltrate and increased gene expression of fibronectin and type III collagen, mainly in the CW + AV-GNPs group. The therapies were able to reduce pro-inflammatory cytokines, increase anti-inflammatory cytokines, and reduce oxidative stress. The results demonstrated that the effects of GNPs appear to complement those of the extracts, thereby enhancing the tissue repair process.

Upconverting Nanoparticle-based Enhanced Luminescence Lateral-Flow Assay for Urinary Biomarker Monitoring.

Development of efficient portable sensors for accurately detecting biomarkers is crucial for early disease diagnosis, yet remains a significant challenge. To address this need, we introduce the enhanced luminescence lateral-flow assay, which leverages highly luminescent upconverting nanoparticles (UCNPs) alongside a portable reader and a smartphone app. The sensor's efficiency and versatility were shown for kidney health monitoring as a proof of concept. We engineered Er3+- and Tm3+-doped UCNPs coated with multiple layers, including an undoped inert matrix shell, a mesoporous silica shell, and an outer layer of gold (UCNP@mSiO2@Au). These coatings synergistically enhance emission by over 40-fold and facilitate biomolecule conjugation, rendering UCNP@mSiO2@Au easy to use and suitable for a broad range of bioapplications. Employing these optimized nanoparticles in lateral-flow assays, we successfully detected two acute kidney injury-related biomarkers─kidney injury molecule-1 (KIM-1) and neutrophil gelatinase-associated lipocalin (NGAL)─in urine samples. Using our sensor platform, KIM-1 and NGAL can be accurately detected and quantified within the range of 0.1 to 20 ng/mL, boasting impressively low limits of detection at 0.28 and 0.23 ng/mL, respectively. Validating our approach, we analyzed clinical urine samples, achieving biomarker concentrations that closely correlated with results obtained via ELISA. Importantly, our system enables biomarker quantification in less than 15 min, underscoring the performance of our novel UCNP-based approach and its potential as reliable, rapid, and user-friendly diagnostics.

Influence of genetic polymorphisms of Hg metabolism and DNA repair on the frequencies of micronuclei, nucleoplasmic bridges, and nuclear buds in communities living in gold mining areas.

Fishing communities living near gold mining areas are at increased risk of mercury (Hg) exposure via bioaccumulation of methylmercury (MeHg) in fish. This exposure has been linked to health effects that may be triggered by genotoxic events. Genetic polymorphisms play a role in the risk associated with Hg exposure. This study evaluated the effect of single nucleotide polymorphisms (SNPs) in metabolic and DNA repair genes on genetic instability and total hair Hg (T-Hg) levels in 78 individuals from "La Mojana" in northern Colombia and 34 individuals from a reference area. Genetic instability was assessed by the frequency of micronuclei (MNBN), nuclear buds (NBUDS), and nucleoplasmic bridges (NPB). We used a Poisson regression to assess the influence of SNPs on T-Hg levels and genetic instability, and a Bayesian regression to examine the interaction between Hg detoxification and DNA repair. Among exposed individuals, carriers of XRCC1Arg399Gln had a significantly higher frequency of MNBN. Conversely, the XRCC1Arg194Trp and OGG1Ser326Cys polymorphisms were associated with lower frequencies of MNBN. XRCC1Arg399Gln, XRCC1Arg280His, and GSTM1Null carriers showed lower NPB frequencies. Our results also indicated that individuals with the GSTM1Nulland GSTT1null polymorphisms had a 1.6-fold risk for higher T-Hg levels. The Bayesian model showed increased MNBN frequencies in carriers of the GSTM1Null polymorphism in combination with XRCC1Arg399Gln and increased NBUDS frequencies in the GSTM1Null carriers with the XRCC3Thr241Met and OGG1Ser326Cys alleles. The GSTM1+ variant was found to be a protective factor in individuals carrying OGG1Ser326Cys (MNBN) and XRCC1Arg280His (NPB); the GSTT1+ polymorphism combined with XRCCArg194Trp also modulated lower MNBN frequencies, while GSTT1+ carriers with the XRCC1Arg399Gln allele showed lower NPB frequencies. Consistent with GSTM1, GSTT1Null carriers with XRCC3Thr241Met showed increased NBUDS frequency. With the rise of gold mining activities, these approaches are vital to identify and safeguard populations vulnerable to Hg's toxic effects.

Clinical and parasitological features of Leishmania infection among gold miners in the Oiapoque basin, an international Brazil-French Guiana border.

Gold miners working illegally in mines live in poor health conditions related to their strenuous work and precarious housing. Therefore, they are at higher risk for infectious diseases. American tegumentary leishmaniasis (ATL) appears to be of great concern to the population living in the Guiana Shield region. Our aim was to describe their demographic characteristics, the clinical features of cutaneous leishmaniasis (CL), and the frequency of Leishmania infection in people working in illegal gold mines in French Guiana. A cross-sectional study was carried out from October to December 2019 in Oiapoque city, Amapá, Brazil. Indeed, many gold miners working in French Guiana are originally from Brazil, and from Oiapoque in particular. A total of 105 participants from 31 different mining sites in French Guiana were recruited. Suspected Leishmania infection was confirmed by the following: detection of kDNA in blood or the lesion site; detection of specific antibodies; or detection of IFN-γ release after blood incubation with leishmanial antigens (IGRA-Leish). Nine active CL cases, 38 healed ATL (hATL) and 58 cases with no history of ATL (noATL), were identified. Only half of the treated hATL (50.0%; n = 14) reported having been assisted by a health care unit and the others treated themselves. PCR-kDNA for Leishmania was positive in the blood of 100% of CL cases. Curiously, blood PCR-kDNA was positive in 13% of hATL patients and in 15.5% of noATL patients. The IGRA-Leish was positive in 60.5% of hATL and in 37.9% of noATL. In addition to scars suggestive of CL, 71% of hATL had laboratory evidence of Leishmania infection. Restriction fragment polymorphism (RFLP) of the hsp70 gene identified a sympatric circulation of L. (V.) guyanensis (n = 4), L. (V.) braziliensis (n = 1), L. (L.) amazonensis (n = 2), L. (V.) shawi (n = 1) and L. (V.) naiffi/shawi (n = 1). Taking the laboratory techniques and the clinical evaluations together, 76% (n = 80) of the 105 participants had evidence of Leishmania infection. These results suggests that illegal gold miners working in French Guiana are at high risk for infection with different species of Leishmania, but their illegal condition and remoteness make it difficult for them to access health services.

Utilizing COVID-19 as a Model for Diagnostics Using an Electrochemical Sensor.

This paper reports a rapid and sensitive sensor for the detection and quantification of the COVID-19 N-protein (N-PROT) via an electrochemical mechanism. Single-frequency electrochemical impedance spectroscopy was used as a transduction method for real-time measurement of the N-PROT in an immunosensor system based on gold-conjugate-modified carbon screen-printed electrodes (Cov-Ag-SPE). The system presents high selectivity attained through an optimal stimulation signal composed of a 0.0 V DC potential and 10 mV RMS-1 AC signal at 100 Hz over 300 s. The Cov-Ag-SPE showed a log response toward N-PROT detection at concentrations from 1.0 ng mL-1 to 10.0 µg mL-1, with a 0.977 correlation coefficient for the phase (θ) variation. An ML-based approach could be created using some aspects observed from the positive and negative samples; hence, it was possible to classify 252 samples, reaching 83.0, 96.2 and 91.3% sensitivity, specificity, and accuracy, respectively, with confidence intervals (CI) ranging from 73.0 to 100.0%. Because impedance spectroscopy measurements can be performed with low-cost portable instruments, the immunosensor proposed here can be applied in point-of-care diagnostics for mass testing, even in places with limited resources, as an alternative to the common diagnostics methods.

Hydrogel composites based on chitosan and CuAuTiO2 photocatalysts for hydrogen production under simulated sunlight irradiation.

This study explored the photocatalytic hydrogen evolution reaction (HER) using novel biohydrogel composites comprising chitosan, and a photocatalyst consisting in TiO2 P25 decorated with Au and/or Cu mono- and bimetallic nanoparticles (NPs) to boost its optical and catalytic properties. Low loads of Cu and Au (1 mol%) were incorporated onto TiO2 via a green photodeposition methodology. Characterization techniques confirmed the incorporation of decoration metals as well as improvements in the light absorption properties in the visible light interval (λ > 390 nm) and electron transfer capability of the semiconductors. Thereafter, Au and/or Cu NP-supported TiO2 were incorporated into chitosan-based physically crosslinked hydrogels revealing significant interactions between chitosan functional groups (hydroxyls, amines and amides) with the NPs to ensure its encapsulation. These materials were evaluated as photocatalysts for the HER using water and methanol mixtures under simulated sunlight and visible light irradiation. Sample CuAuTiO2/ChTPP exhibited a maximum hydrogen generation of 1790 µmol g-1 h-1 under simulated sunlight irradiation, almost 12-folds higher compared with TiO2/ChTPP. Also, the nanocomposites revealed a similar tendency under visible light with a maximum hydrogen production of 590 µmol g-1 h-1. These results agree with the efficiency of photoinduced charge separation revealed by transient photocurrent and EIS.

Biosynthesis of gold nanoparticles by fungi and its potential in SERS.

Surface enhanced Raman spectroscopy (SERS) by using gold nanoparticles (AuNPs) has gained relevance for the identification of biomolecules and some cancer cells. Searching for greener NPs synthesis alternatives, we evaluated the SERS properties of AuNPs produced by using different filamentous fungi. The AuNPs were synthesized utilizing the supernatant of Botrytis cinerea, Trichoderma atroviride, Trichoderma asperellum, Alternaria sp. and Ganoderma sessile. The AuNPs were characterized by ultraviolet-visible spectroscopy (UV-Vis) to identify its characteristic surface plasmon resonance, which was located at 545 nm (B. cinerea), 550 nm (T. atroviride), 540 nm (T. asperellum), 530 nm (Alternaria sp.), and 525 nm (G. sessile). Morphology, size and crystal structure were characterized through transmission electron microscopy (TEM); colloidal stability was assessed by Z-potential measurements. We found that, under specific incubation conditions, it was possible to obtain AuNPs with spherical and quasi-spherical shapes, which mean size range depends on the fungal species supernatant with 92.9 nm (B. cinerea), 24.7 nm (T. atroviride), 16.4 nm (T. asperellum), 9.5 nm (Alternaria sp.), and 13.6 nm (G. sessile). This, as it can be expected, has an effect on Raman amplification. A micro-Raman spectroscopy system operated at a wavelength of 532 nm was used for the evaluation of the SERS features of the AuNPs. We chose methylene blue as our target molecule since it has been widely used for such a purpose in the literature. Our results show that AuNPs synthesized with the supernatant of T. atroviride, T. asperellum and Alternaria sp. produce the stronger SERS effect, with enhancement factor (EF) of 20.9, 28.8 and 35.46, respectively. These results are promising and could serve as the base line for the development of biosensors through a facile, simple, and low-cost green alternative.

Nanoarchitectonics of an acetogenin-enriched nanosystem mediated by an aqueous extract ofAnnona cherimolaMill with anti-inflammatory and proapoptotic activity against HepG2 cell line.

For the first time, this study shows the nanoarchitectonic process to obtain an acetogenin-enriched nanosystem (AuNPs-Ac) using an aqueous extract fromAnnona cherimolaMill (ACM) composed of gold nanoparticles embedded in an organic matrix that acts as stabilizing agent and presents anti-inflammatory activity and cytotoxical effect against HepG2 cell line, promoting apoptosis. The synthesis of AuNPs-Ac was confirmed by x-ray diffraction analysis, showing metallic gold as the only phase, and the scanning transmission microscope showed an organic cap covering the AuNPs-Ac. Fourier-transformed infrared suggests that the organic cap comprises a combination of different annonaceous acetogenins, alkaloids, and phenols by the presence of bands corresponding to aromatic rings and hydroxyl groups. High-Performance Liquid Chromatography has demonstrated the presence of annonacin, a potent acetogenin, in the extract of ACM. Anin vitroanti-inflammatory activity of the extract of ACM and the AuNPs-Ac was performed using the albumin denaturation method, showing a nonlinear response, which is better than sodium diclofenac salt in a wide range of concentrations that goes from 200 to 400µg ml-1with both samples. The viability assay was studied using trypan blue, treating IMR90 and HepG2 at different concentrations of AuNPs-Ac. The results defined a median lethal dose of 800µg ml-1against HepG2 through apoptosis according to the ratio of caspase-cleaved 9/alpha-tubulin evaluated. It was also demonstrated that the nanosystem presents a higher cytotoxic effect on the HepG2 cell line than in IMR90, suggesting a targeted mechanism. In addition, the nanosystem performs better than using only the extract of ACM in the anti-inflammatory or antiproliferative test, attributed to their higher surface area.

Tau- and α-synuclein-targeted gold nanoparticles: applications, opportunities, and future outlooks in the diagnosis and therapy of neurodegenerative diseases.

The use of nanomaterials in medicine offers multiple opportunities to address neurodegenerative disorders such as Alzheimer's and Parkinson's disease. These diseases are a significant burden for society and the health system, affecting millions of people worldwide without sensitive and selective diagnostic methodologies or effective treatments to stop their progression. In this sense, the use of gold nanoparticles is a promising tool due to their unique properties at the nanometric level. They can be functionalized with specific molecules to selectively target pathological proteins such as Tau and α-synuclein for Alzheimer's and Parkinson's disease, respectively. Additionally, these proteins are used as diagnostic biomarkers, wherein gold nanoparticles play a key role in enhancing their signal, even at the low concentrations present in biological samples such as blood or cerebrospinal fluid, thus enabling an early and accurate diagnosis. On the other hand, gold nanoparticles act as drug delivery platforms, bringing therapeutic agents directly into the brain, improving treatment efficiency and precision, and reducing side effects in healthy tissues. However, despite the exciting potential of gold nanoparticles, it is crucial to address the challenges and issues associated with their use in the medical field before they can be widely applied in clinical settings. It is critical to ensure the safety and biocompatibility of these nanomaterials in the context of the central nervous system. Therefore, rigorous preclinical and clinical studies are needed to assess the efficacy and feasibility of these strategies in patients. Since there is scarce and sometimes contradictory literature about their use in this context, the main aim of this review is to discuss and analyze the current state-of-the-art of gold nanoparticles in relation to delivery, diagnosis, and therapy for Alzheimer's and Parkinson's disease, as well as recent research about their use in preclinical, clinical, and emerging research areas.