Electrochemical sensing of lactate by using an electrode modified with molecularly imprinted polymers, reduced graphene oxide and gold nanoparticles.

This paper reports on a sensitive and selective electrochemical sensor for lactic acid. The sensor is based on molecularly imprinted polymers (MIP), obtained on glassy carbon electrode (GCE) modified with reduced graphene oxide and gold nanoparticles. The MIP was obtained by electropolymerization of the o-phenylenediamine (o-PD) on the modified surface of the GCE in the presence of lactic acid. The steps involving the GCE modification and MIP construction were characterized by cyclic voltammetry, electrochemical impedance spectroscopy, scanning electron microscopy and atomic force microscopy. The results were evaluated using differential pulse voltammetry, using the hexacyanoferrate redox system as an electrochemical probe. Under optimized experimental conditions, the imprinted sensor has a linear response in the 0.1 nM to 1.0 nM lactic acid concentration range, with detection limit of 0.09 nM. The sensor exhibits excellent selectivity in the presence of molecules of similar chemical structure. It was applied for the selective determination of lactic acid in sugarcane vinasse. The recovery values ranged from 97.7 to 104.8%. Graphical abstractSchematic representation for MIP/AuNP/RGO/GCE sensor, obtained by electropolymerization of o-phenylediamine (o-PD) on a surface modified with gold nanoparticles (AuNPs) and reduced graphene oxide (RGO). These materials allowed the construction of a MIP-sensor with good selectivity for lactic acid.

Synthesis of a Novel Zn-Salphen Building Block and Its Acrylic Terpolymer Counterparts as Tunable Supramolecular Recognition Systems.

In this work, we present the synthesis of a novel Zn-Salphen complex containing an allyl group, which was used as building block in the further preparation of a new family of functional terpolymers. These polymers were obtained through radical co-polymerization with methyl metacrylate (MMA) and n-butyl acrylate (nBuA) in different ratios. The supramolecular recognition behavior of each polymer was evaluated via potentiometric measurements against selected anions in aqueous media. Interestingly, this proof of concept study shows that these systems were selective against only fluoride (F-) or both, fluoride and acetate (OAc-), by tailoring the relative content of Zn-Salphen monomer, thus making them a promising starting point for modular design of chemical sensors through straightforward synthetic approaches.

High-performance liquid chromatography determination of glyoxal, methylglyoxal, and diacetyl in urine using 4-methoxy-o-phenylenediamine as derivatizing reagent.

Bioanalytical relevance of glyoxal (Go) and methylglyoxal (MGo) arises from their role as biomarkers of glycation processes and oxidative stress. The third compound of interest in this work is diacetyl (DMGo), a component of different food products and alcoholic beverages and one of the small α-ketoaldehydes previously reported in urine. The original idea for the determination of the above compounds by reversed phase high-performance liquid chromatography (HPLC) with fluorimetric detection was to use 4-methoxy-o-phenylenediamine (4MPD) as a derivatizing reagent and diethylglyoxal (DEGo) as internal standard. Acetonitrile was added to urine for matrix precipitation, and derivatization reaction was carried out in the diluted supernatant at neutral pH (40 °C, 4 h); after acidification, salt-induced phase separation enabled recovery of the obtained quinoxalines in the acetonitrile layer. The separation was achieved within 12 min using a C18 Kinetex column and gradient elution. The calibration detection limits for Go, MGo, and DMGo were 0.46, 0.39, and 0.28 µg/L, respectively. Within-day precision for real-world samples did not exceed 6%. Several urine samples from healthy volunteers, diabetic subjects, and juvenile swimmers were analyzed. The sensitivity of the procedure proposed here enabled detection of differences between analyte concentrations in urine from patients at different clinical or exposure-related conditions.

Synthesis, magnetic and spectroscopic studies of a Schiff base derived from cephaclor and 1,2-diaminobenzene and its transition metal complexes.

M(II) coordination compounds of Mn, Fe, Co and Ni with a Schiff base (HL) derived from the condensation of cephaclor antibiotic with 1,2-diaminobenzene were synthesized and characterized by several techniques, including elemental and thermal analysis, molar conductance and magnetic susceptibility measurements, electronic, FT-IR, EPR and (1)H NMR spectral studies. The analytical and molar conductance values indicated that the chloride ions coordinate to the metal ions. Based on these studies, the general formulae [M(L)Cl(H2O)] (M(II)=Mn, Fe, Co, Ni) are proposed for the complexes. The ligand HL behaves as a monoanionic tetradentate NNNO chelating agent.

Synthesis and antiprotozoal activity of novel 2-{[2-(1H-imidazol-1-yl)ethyl]sulfanyl}-1H-benzimidazole derivatives.

A series of 19 new 2-{[2-(1H-imidazol-1-yl)ethyl]sulfanyl}-1H-benzimidazole derivatives was synthesized starting from the properly substituted 1,2-phenylendiamine. These compounds have hydrogen or methyl at position 1; while hydrogen, chlorine, ethoxy or methoxycarbonyl group is at position 5 and/or 6. The novel compounds were tested against protozoa Trichomonas vaginalis, Giardia intestinalis and Entamoeba histolytica. Experimental evaluations revealed strong activity for all tested compounds, having IC50 values in the nanomolar range, which were even better than metronidazole, the drug of choice for these parasites.

Surface-enhanced Raman scattering study of the redox adsorption of p-phenylenediamine on gold or copper surfaces.

The adsorption of the p-phenylenediamine (PPD(+)) radical cation on gold or copper nanoparticle (NP) surfaces was studied through surface-enhanced Raman scattering (SERS) spectroscopy, excited at 1064 nm. The SERS spectra were obtained from gold or copper NPs after exposure to non-oxidized p-phenylenediamine (PPD) aqueous solution, in millimolar concentration. The gold NPs were synthesized as nanoshells involving silica cores (SiO(2)@Au) and the copper NPs were obtained in aqueous medium, undergoing surface oxidation with the formation of Cu(II) oxide nanoshell (Cu@CuO). In the latter, the oxidative adsorption of PPD(+) led to the reduction of the copper oxide, present on NP surface, allowing obtaining the PPD(+) SERS spectrum. The vibrational assignments of the SERS spectra of the adsorbate were performed using the results of Density Functional Theory calculations of the Raman frequencies, which together with the SERS surface selection rules, allowed to infer the adsorption geometry of PPD(+) radical cation on both metallic surfaces. This work stress the investigation of redox processes involved in the molecular adsorption is imperative for the interpretation of the SERS results, which is even more important when copper surfaces are studied.

Evaluation of seven cosubstrates in the quantification of horseradish peroxidase enzyme by square wave voltammetry.

The electrochemical detection for horseradish peroxidase-cosubstrate-H(2)O(2) systems was optimized. o-Phenilendiamine, phenol, hydroquinone, pyrocatechol, p-chlorophenol, p-aminophenol and 3,3'-5,5'-tetramethylbenzidine were evaluated as cosubstrates of horseradish peroxidase (HRP) enzyme. Therefore, the reaction time, the addition sequence of the substrates, the cosubstrate:H(2)O(2) ratio and the electrochemical techniques were elected by one-factor optimization assays while the buffer pH, the enzymatic activity and cosubstrate and H(2)O(2) concentrations for each system were selected simultaneously by response surface methodology. Then, the calibration curves for seven horseradish peroxidase-cosubstrate-H(2)O(2) systems were built and the analytic parameters were analyzed. o-Phenilendiamine was selected as the best cosubstrate for the HRP enzyme. For this system the reaction time of 60s, the phosphate buffer pH 6.0, and the concentrations of 2.5×10(-4)molL(-1) o-phenilendiamine and of 1.25×10(-4)molL(-1) H(2)O(2) were chosen as the optimal conditions. In these conditions, the calibration curve of horseradish peroxidase by square wave voltammetry showed a linearity range from 9.5×10(-11) to 1.9×10(-8)molL(-1) and the limit of detection of 3.8×10(-11)molL(-1) with RSD% of 0.03% (n=3).

Spectrophotometric flow injection monitoring of sulfide during sugar fermentation.

A spectrophotometric flow injection procedure involving N,N-dimethyl-p-phenylenediamine (DMPD) is applied to the sulfide monitoring of a sugar fermentation by Saccharomyces cerevisiae under laboratory conditions. The gaseous chemical species evolving from the fermentative process, mainly CO(2), are trapped allowing a cleaned sample aliquot to be collected and introduced into the flow injection analyzer. Measurement rate, signal repeatability, detection limit and reagent consumption per measurement were estimated as 150 h(-1), 0.36% (n=20), 0.014 mg L(-1) S and 120 µg DMPD, respectively. The main characteristics of the monitoring record are discussed. The strategy is worthwhile for selecting yeast strain, increasing the industrial ethanol production and improving the quality of wines.

Direct introduction of water sample in multisegmented flow-injection analysis for sulfide determination.

The present paper describes an inline flow-injection analysis system for the determination of sulfide in water samples, exploiting the Fischer reaction. Water samples were collected and introduced into a reactor of the FIA system. The sulfide released, after sample acidification, was carried out with a nitrogen gas flow and mixed with N,N diethyl-p-phenylenediamine (DEPD) solution in the presence of Fe(III). The blue dye formed was measured in the wavelength range between 672-679 nm. An evaluation of the effects of chemical and flow factors was performed using the factorial design of two levels, while optimization was accomplished by a Doehlert matrix. The system presented two linear-response ranges: the first of 0.433 to 400 µg L(-1) and the second of 400 to 3500 µg L(-1). The detection and quantification limit were found to be 0.130 and 0.433 µg L(-1), respectively, while the sample throughput was 12 h(-1). The precision was evaluated as the relative standard deviation (n = 10); for 50 and 100 µg L(-1) sulfide it was found to be 1.9 and 2.3%, respectively. The method showed satisfactory selectivity regarding the main interference present in environmental samples. The accuracy of the method was successfully evaluated in environmental water samples after a comparison with a literature reference method.

Comparative study of amplification systems in immunoenzyme assays for the diagnosis of American tegumentary leishmaniasis.

We compared the accuracy and reliability of three amplification systems for enzyme immunoassays in the detection of specific IgG antibodies for the diagnosis of cutaneous leishmaniasis caused by Leishmania (Viannia) braziliensis in patients from an endemic area in Rio de Janeiro, Brazil. Partially soluble antigens obtained from the promastigote forms of L. (V.) braziliensis were used. For development of the reaction, two chromogens, 1,2-orthophenylenediamine (OPD) and 3,3',5,5'-tetramethylbenzidine (TMB), and a fluorogen, 4-methylumbelliferylphosphate (MUP), were tested. The performance of each system was compared using the following parameters: accuracy, intraclass correlation coefficient (ICC), and area under the receiver operating characteristic (ROC) curve. Sensitivity was the same (97.4%) for all systems. The reliability was excellent (ICC = 98.6, 98.7, and 99.1%) and specificity was 93.7, 95.8, and 97.4% for OPD, MUP, and TMB, respectively, showing no statistical significance. Despite the absence of differences in the performance of the three systems, the use of TMB is suggested because of its operational advantages, such as low cost compared with fluorogens, easy manipulation, greater stability, and lower toxicity.

Electrolytic treatment of wastewater containing n-phenyl-n'-1,3-dimethylbutyl-p-phenylenediamine.

This study investigated the effects of electrolytic treatment using Dimensionally Stable Anode (DSA, 70%TiO2/30%RuO2) type electrodes in simulated wastewater containing aromatic amine n-phenyl-n'-1,3-dimethylbutyl-p-phenylenediamine (Flexzone 7P). A low direct current density of 0.025 A cm(-2) was applied for periods up to 60 minutes and a 52.6% decrease in Flexzone 7P concentration was observed. Ultraviolet-visible spectra, gas chromatography, toxicity and biodegradation tests were carried out with the aim of verifying the toxic by-products that were formed. Ultraviolet-visible spectra of simulated wastewater exhibited changes in the aromatic amine's molecular structure. Additionally, based on the S. cerevisiae toxicity test, it was observed that detoxification of the wastewater occurred after 15 minutes of electrolysis. It was also observed that five minutes of treatment were sufficient to improve the biodegradation rate, determined through the respirometric Bartha method.

Identification of functionally important cysteines in the alpha-subunit of transducin by chemical cross-linking techniques.

Transducin (T), the G-protein in the visual system, is a heterotrimer arranged as two functional units, Talpha and Tbetagamma. N,N'-1,2-phenylenedimaleimide (o-PDM) and N,N'-1,4-phenylenedimaleimide (p-PDM), two cysteine specific-homobifunctional agents, were used to covalently cross-link T and its units. A complete inhibition in T function was observed in the presence of these compounds. Incubation of Talpha with o-PDM or p-PDM resulted in the formation of high-molecular-weight oligomers of 70-, 105-, 140-, and >200 kDa, as well as intramolecular cross-linked polypeptides that migrated as 35- and 37-kDa bands. Additionally, the treatment of Tbetagamma with both reagents produced a major species of 46-kDa. The combination of intact Talpha and o-PDM- or p-PDM-treated Tbetagamma reconstituted T native activities. On the contrary, when o-PDM- or p-PDM-modified Talpha was incubated with intact Tbetagamma, more than 90% inhibition on T function was observed. Hence, the cysteines modified and/or cross-linked on Talpha represent functionally important residues of T.