ABSTRACT
Drug-resistant bacteria such as Escherichia coli and Staphylococcus aureus represent a global health problem that requires priority attention. Due to the current situation, there is an urgent need to develop new, more effective and safe antimicrobial agents. Biotechnological approaches can provide a possible alternative control through the production of new generation antimicrobial agents, such as silver nanoparticles (AgNPs) and bacteriocins. AgNPs stand out for their antimicrobial potential by employing several mechanisms of action that can act simultaneously on the target cell such as the production of reactive oxygen species and cell wall rupture. On the other hand, bacteriocins are natural peptides synthesized ribosomally that have antimicrobial activity and are produced, among others, by lactic acid bacteria (LAB), whose main mechanism of action is to produce pores at the level of the cell membrane of bacterial cells. However, these agents have disadvantages. Nanoparticles also have limitations such as the tendency to form aggregates, which decreases their antibacterial activity and possible cytotoxic effects, and bacteriocins have a narrow spectrum of action, require high doses to be effective, and can be degraded by proteases. Given these limitations, nanoconjugates of these two agents have been developed that can act synergistically in the control of pathogenic bacteria resistant to antibiotics. This review focuses on knowing relevant aspects of the antibiotic resistance of E. coli and S. aureus, the characteristics of these new generation antibacterial agents, and their effect alone or forming nanoconjugates that are more effective against the multiresistant mentioned bacteria.
Subject(s)
Anti-Bacterial Agents , Bacteriocins , Drug Resistance, Multiple, Bacterial , Escherichia coli , Metal Nanoparticles , Nanocomposites , Silver , Staphylococcus aureus , Bacteriocins/pharmacology , Bacteriocins/chemistry , Silver/pharmacology , Silver/chemistry , Escherichia coli/drug effects , Metal Nanoparticles/chemistry , Staphylococcus aureus/drug effects , Anti-Bacterial Agents/pharmacology , Anti-Bacterial Agents/chemistry , Drug Resistance, Multiple, Bacterial/drug effects , Nanocomposites/chemistry , Microbial Sensitivity Tests , Lactobacillales/metabolism , Lactobacillales/drug effectsABSTRACT
Microalgae are susceptible to most pollutants in aquatic ecosystems and can be potentially damaged by silver nanoparticles (AgNPs). This study aims to clarify the potential consequences of Chlorella vulgaris internalizing AgNPs. The exposure of C. vulgaris to AgNPs stabilized with citrate led to the accumulation of NPs in the cell wall, increasing permeability, which allowed the entry of AgNPs and Ag + ions resulting from the dissolution of AgNPs. Ag + accumulated inside the cell could be converted into AgNPs (endogenous) due to the reducing potential of the cytoplasm. Both exogenous and endogenous AgNPs caused damage to all biological structures of the algae, as demonstrated by TEM images. This damage included the disorganization of chloroplasts, deposition of AgNPs on starch granules, and increased amounts of lipids, starch granules, exopolysaccharides, plastoglobuli, and cell diameters. These changes caused cell death by altering cell viability and interfering with organelle functions, possibly due to reactive oxygen species generated by nanoparticles, as shown in a lipid bilayer model. These findings highlight the importance of considering the exposure risks of AgNPs in a worldwide distributed chlorophyte.
Subject(s)
Chlorella vulgaris , Metal Nanoparticles , Microalgae , Reactive Oxygen Species , Silver , Silver/metabolism , Silver/pharmacology , Chlorella vulgaris/drug effects , Chlorella vulgaris/metabolism , Chlorella vulgaris/growth & development , Metal Nanoparticles/chemistry , Microalgae/metabolism , Microalgae/drug effects , Reactive Oxygen Species/metabolism , Microscopy, Electron, Transmission , Cell Wall/drug effects , Cell Wall/metabolism , Chloroplasts/metabolism , Chloroplasts/drug effectsABSTRACT
This study evaluated push-out bond test (POBT), surface roughness, and antimicrobial properties against Enterococcus faecalis of bioceramic sealers supplemented with silver nanoparticles (AgNPs). The sealers tested were CeraSeal®, EndoSequence® BC SealerTM, and Bio-C® Sealer. The POBT was measured with a Universal Testing Machine, and the type of failure was evaluated with a stereomicroscope. The roughness average (Sa) and peak-valley height (Sy) values were evaluated by atomic force microscopy. The bacterial growth inhibition was evaluated using a disk diffusion test, and antimicrobial activity was determined with the plate microdilution method. The POBT showed no significant difference between sealers with and those without NPs in cervical and apical thirds (p > 0.05). In the middle third, the adhesion force was significant for Endosequence BC Sealer® (p < 0.05). The results showed that the Sa and Sy parameters, when AgNPs were added, did not show a statistically significant difference compared to the groups without nanoparticles (p > 0.05). All tested sealers showed bacterial growth inhibition, but no significant difference was found. Their efficacy, in descending order of antibacterial activity when AgNPs were added, is as follows: EndoSequence® BC SealerTM > Bio-C® Sealer > CeraSeal®. The incorporation of AgNPs into bioceramics improves antimicrobial activity without affecting mechanical properties.
Subject(s)
Enterococcus faecalis , Metal Nanoparticles , Root Canal Filling Materials , Silver , Surface Properties , Silver/chemistry , Silver/pharmacology , Metal Nanoparticles/chemistry , Root Canal Filling Materials/chemistry , Root Canal Filling Materials/pharmacology , Enterococcus faecalis/drug effects , Enterococcus faecalis/growth & development , Anti-Infective Agents/pharmacology , Anti-Infective Agents/chemistry , Anti-Bacterial Agents/pharmacology , Anti-Bacterial Agents/chemistry , Materials Testing , Humans , Microbial Sensitivity Tests , Ceramics/chemistry , Ceramics/pharmacology , Microscopy, Atomic Force , Calcium Phosphates , Drug Combinations , Oxides , SilicatesABSTRACT
The incorporation of bactericidal properties into textiles is a widely sought-after aspect, and silver nanoparticles (AgNPs) can be used for this. Here, we evaluate a strategy for incorporating AgNPs into a cotton fabric. For this purpose, a bactericidal textile coating based on a composite of AgNPs and kappa-carrageenan (k-CA) was proposed. The composite was obtained by heating the silver precursor (AgNO3) directly in k-CA solution for green synthesis and in situ AgNPs stabilization. Cotton substrates were added to the heated composite solution for surface impregnation and hydrogel film formation after cooling. Direct synthesis of AgNPs on a fabric was also tested. The results showed that the application of a coating based on k-CA/AgNPs composite can achieve more than twice the silver loading on the fabric surface compared to the textile subjected to direct AgNPs incorporation. Furthermore, silver release tests in water showed that higher Ag+ levels were reached for k-CA/AgNPs-coated cotton. Therefore, inoculation tests with the bacteria Staphylococcus aureus (SA) using the agar diffusion method showed that samples covered with the composite resulted in significantly larger inhibition halos. This indicated that the use of the composite as a coating for cotton fabric improved its bactericidal activity against SA.
Subject(s)
Anti-Bacterial Agents , Carrageenan , Cotton Fiber , Materials Testing , Metal Nanoparticles , Microbial Sensitivity Tests , Particle Size , Silver , Staphylococcus aureus , Silver/chemistry , Silver/pharmacology , Carrageenan/chemistry , Carrageenan/pharmacology , Metal Nanoparticles/chemistry , Staphylococcus aureus/drug effects , Anti-Bacterial Agents/pharmacology , Anti-Bacterial Agents/chemistry , Anti-Bacterial Agents/chemical synthesis , Textiles , Surface PropertiesABSTRACT
Nanotechnology has brought significant advancements to agriculture through the development of engineered nanomaterials (ENPs). Silver nanoparticles (AgNPs) capped with polysaccharides have been applied in agricultural diagnostics, crop pest management, and seed priming. Hyaluronic acid (HA), a natural polysaccharide with bactericidal properties, has been considered a growth regulator for plant tissues and an inducer of systemic resistance against plant diseases. Additionally, HA has been employed as a stabilizing agent for AgNPs. This study investigated the synthesis and effects of hyaluronic acid-stabilized silver nanoparticles (HA-AgNPs) as a seed priming agent on lettuce (Lactuca sativa L.) seed germination. HA-AgNPs were characterized using several techniques, exhibiting spherical morphology and good colloidal stability. Germination assays conducted with 0.1, 0.04, and 0.02 g/L of HA-AgNPs showed a concentration-dependent reduction in seed germination. Conversely, lower concentrations of HA-AgNPs significantly increased germination rates, survival, tolerance indices, and seed water absorption compared to silver ions (Ag+). SEM/EDS indicated more significant potential for HA-AgNPs internalization compared to Ag+. Therefore, these findings are innovative and open new avenues for understanding the impact of Ag+ and HA-AgNPs on seed germination.
Subject(s)
Germination , Hyaluronic Acid , Lactuca , Metal Nanoparticles , Seeds , Silver , Lactuca/drug effects , Lactuca/growth & development , Silver/chemistry , Silver/toxicity , Silver/pharmacology , Germination/drug effects , Metal Nanoparticles/toxicity , Metal Nanoparticles/chemistry , Seeds/drug effects , Seeds/growth & development , Hyaluronic Acid/chemistry , Hyaluronic Acid/pharmacologyABSTRACT
BACKGROUND: Currently, there is no antiviral licensed to treat chikungunya fever, a disease caused by the infection with Alphavirus chikungunya (CHIKV). Treatment is based on analgesic and anti-inflammatory drugs to relieve symptoms. Our study aimed to evaluate the antiviral activity of sulfadoxine (SFX), an FDA-approved drug, and its derivatives complexed with silver(I) (AgSFX), salicylaldehyde Schiff base (SFX-SL), and with both Ag and SL (AgSFX-SL) against CHIKV. METHODS: The anti-CHIKV activity of SFX and its derivatives was investigated using BHK-21 cells infected with CHIKV-nanoluc, a marker virus-carrying nanoluciferase reporter. Dose-response and time of drug-addition assays were performed in order to assess the antiviral effects of the compounds, as well as in silico data and ATR-FTIR analysis for insights on their mechanisms of action. RESULTS: The SFX inhibited 34% of CHIKV replication, while AgSFX, SFX-SL, and AgSFX-SL enhanced anti-CHIKV activity to 84%, 89%, and 95%, respectively. AgSFX, SFX-SL, and AgSFX-SL significantly decreased viral entry and post-entry to host cells, and the latter also protected cells against infection. Additionally, molecular docking calculations and ATR-FTIR analysis demonstrated interactions of SFX-SL, AgSFX, and AgSFX-SL with CHIKV. CONCLUSIONS: Collectively, our findings suggest that the addition of metal ions and/or Schiff base to SFX improved its antiviral activity against CHIKV.
Subject(s)
Antiviral Agents , Chikungunya Fever , Chikungunya virus , Sulfadoxine , Chikungunya virus/drug effects , Antiviral Agents/pharmacology , Antiviral Agents/chemistry , Animals , Cell Line , Sulfadoxine/pharmacology , Chikungunya Fever/drug therapy , Chikungunya Fever/virology , Cricetinae , Schiff Bases/pharmacology , Silver/pharmacology , Silver/chemistry , Virus Replication/drug effects , Molecular Docking Simulation , Dose-Response Relationship, Drug , Humans , AldehydesABSTRACT
To ascertain the bioinorganic chemistry of metals conjugated with quinones, the complexes [Ag(ATV)(PPh3)2] (1), [Au(ATV)(PPh3)]·2H2O (2), and [Cu(ATV)(PPh3)2] (3) were synthesized by the coordination of the antimalarial naphthoquinone atovaquone (ATV) to the starting materials [Ag(PPh3)2]NO3, [Au(PPh3)Cl], and [Cu(PPh3)2NO3], respectively. These complexes were characterized by analytical and spectroscopical techniques. X-ray diffraction of single crystals precisely confirmed the coordination mode of ATV to the metals, which was monodentate or bidentate, depending on the metal center. Both coordination modes showed high stability in the solid state and in solution. All three complexes showed negative log D values at pH 5, but at pH 7.4, while complex 2 continued to have a negative log D value, complexes 1 and 3 displayed positive values, indicating a more hydrophilic character. ATV and complexes 1-3 could bind to ferriprotoporphyrin IX (FePPIX); however, only complexes 1-3 could inhibit ß-hematin crystal formation. Phenotype-based activity revealed that all three metal complexes are able to inhibit the growth of P. falciparum with potency and selectivity comparable to those of ATV, while the starting materials lack this activity. The outcomes of this chemical design may provide significant insights into structure-activity relationships for the development of new antimalarial agents.
Subject(s)
Antimalarials , Atovaquone , Coordination Complexes , Heme , Plasmodium falciparum , Antimalarials/pharmacology , Antimalarials/chemistry , Antimalarials/chemical synthesis , Plasmodium falciparum/drug effects , Coordination Complexes/pharmacology , Coordination Complexes/chemistry , Coordination Complexes/chemical synthesis , Heme/chemistry , Atovaquone/pharmacology , Atovaquone/chemistry , Atovaquone/chemical synthesis , Molecular Structure , Copper/chemistry , Copper/pharmacology , Silver/chemistry , Silver/pharmacology , Gold/chemistry , Gold/pharmacology , Phosphines/chemistry , Phosphines/pharmacology , Parasitic Sensitivity Tests , Structure-Activity Relationship , Models, Molecular , HumansABSTRACT
Among external stimuli-responsive therapy approaches, those using near infrared (NIR) light irradiation have attracted significant attention to treat bone-related diseases and bone tissue regeneration. Therefore, the development of metallic biomaterials sensitive to NIR stimuli is an important area of research in orthopaedics. In this study, we have generated in situ prism-shaped silver nanoparticles (p-AgNPs) in a biomorphic nano-holed TiO2 coating on a Ti6Al4V alloy (a-Ti6Al4V). Insertion of p-AgNPs does not disturb the periodically arranged sub-wavelength-sized unit cell on the a-Ti6Al4V dielectric structure, while they exacerbate its peculiar optical response, which results in a higher NIR reflectivity and high efficiency of NIR photothermal energy conversion suitable to bacterial annihilation. Together, these results open a promising path toward strategic bone therapeutic procedures, providing novel insights into precision medicine.
Subject(s)
Alloys , Anti-Bacterial Agents , Infrared Rays , Metal Nanoparticles , Silver , Surface Properties , Titanium , Titanium/chemistry , Titanium/pharmacology , Alloys/chemistry , Alloys/pharmacology , Silver/chemistry , Silver/pharmacology , Anti-Bacterial Agents/pharmacology , Anti-Bacterial Agents/chemistry , Metal Nanoparticles/chemistry , Staphylococcus aureus/drug effects , Microbial Sensitivity Tests , Escherichia coli/drug effects , Particle SizeABSTRACT
In this study, the biosynthesis of polyhydroxyalkanoates (PHAs) was carried out using Pseudomonas putida and Pseudomonas aeruginosa. These PHAs were produced using reagent-grade glycerol and crude glycerol as the carbon sources. The objective was to compare the production of PHAs and to functionalize these polymers with silver nanoparticles to provide antibacterial properties for potential biomedical applications. The findings from the physical and chemical analyses confirmed the successful synthesis and extraction of PHAs, achieving comparable yields using both crude glycerol and reagent-grade glycerol as carbon sources across both strains. Approximately 16% higher PHAs production was obtained using Pseudomonas putida compared to Pseudomonas aeruginosa, and no significant difference was observed in the production rate of PHAs between the two carbon sources used, which means that crude glycerol could be utilized even though it has more impurities. Notably, PHAs functionalized with silver nanoparticles showed improved antibacterial effectiveness, especially those derived from reagent-grade glycerol and the Pseudomonas aeruginosa strain.
Subject(s)
Anti-Bacterial Agents , Glycerol , Metal Nanoparticles , Polyhydroxyalkanoates , Pseudomonas aeruginosa , Pseudomonas putida , Silver , Pseudomonas aeruginosa/drug effects , Pseudomonas aeruginosa/metabolism , Pseudomonas putida/metabolism , Silver/chemistry , Silver/pharmacology , Polyhydroxyalkanoates/biosynthesis , Polyhydroxyalkanoates/chemistry , Metal Nanoparticles/chemistry , Anti-Bacterial Agents/pharmacology , Anti-Bacterial Agents/chemistry , Anti-Bacterial Agents/biosynthesis , Glycerol/chemistry , Glycerol/metabolism , Microbial Sensitivity TestsABSTRACT
This study reports on the modification of bacterial cellulose (BC) membranes produced by static fermentation of Komagataeibacter xylinus bacterial strains with graphene oxide-silver nanoparticles (GO-Ag) to yield skin wound dressings with improved antibacterial properties. The GO-Ag sheets were synthesized through chemical reduction with sodium citrate and were utilized to functionalize the BC membranes (BC/GO-Ag). The BC/GO-Ag composites were characterized to determine their surface charge, morphology, exudate absorption, antimicrobial activity, and cytotoxicity by using fibroblast cells. The antimicrobial activity of the wound dressings was assessed against Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa. The results indicate that the BC/GO-Ag dressings can inhibit â¼70% of E. coli cells. Our findings also revealed that the porous BC/GO-Ag antimicrobial dressings can efficiently retain 94% of exudate absorption after exposure to simulated body fluid (SBF) for 24 h. These results suggest that the dressings could absorb excess exudate from the wound during clinical application, maintaining adequate moisture, and promoting the proliferation of epithelial cells. The BC/GO-Ag hybrid materials exhibited excellent mechanical flexibility and low cytotoxicity to fibroblast cells, making excellent wound dressings able to control bacterial infectious processes and promote the fast healing of dermal lesions.
Subject(s)
Anti-Bacterial Agents , Biocompatible Materials , Cellulose , Escherichia coli , Graphite , Materials Testing , Metal Nanoparticles , Microbial Sensitivity Tests , Silver , Staphylococcus aureus , Wound Healing , Graphite/chemistry , Graphite/pharmacology , Silver/chemistry , Silver/pharmacology , Wound Healing/drug effects , Cellulose/chemistry , Cellulose/pharmacology , Metal Nanoparticles/chemistry , Anti-Bacterial Agents/chemistry , Anti-Bacterial Agents/pharmacology , Staphylococcus aureus/drug effects , Escherichia coli/drug effects , Biocompatible Materials/chemistry , Biocompatible Materials/pharmacology , Particle Size , Pseudomonas aeruginosa/drug effects , Gluconacetobacter xylinus/chemistry , Humans , Mice , Bandages , AnimalsABSTRACT
Acinetobacter baumannii is a bacteria associated with nosocomial infections and outbreaks, difficult to control due to its antibiotic resistance, ability to survive in adverse conditions, and biofilm formation adhering to biotic and abiotic surfaces. Therefore, this study aimed to evaluate the antibiofilm activity of biogenic silver nanoparticle (Bio-AgNP) and polymyxin B alone and combined in biofilms formed by isolates of carbapenem-resistant A. baumannii (CR-Ab). In the biofilm formation inhibition assay, CR-Ab strains were exposed to different concentrations of the treatments before inducing biofilm formation, to determine the ability to inhibit/prevent bacterial biofilm formation. While in the biofilm rupture assay, the bacterial biofilm formation step was previously carried out and the adhered cells were exposed to different concentrations of the treatments to evaluate their ability to destroy the bacterial biofilm formed. All CR-Ab isolates and ATCC® 19606™ used in this study are strong biofilm formers. The antibiofilm activity of Bio-AgNP and polymyxin B against CR-Ab and ATCC® 19606™ demonstrated inhibitory and biofilm-disrupting activity. When used in combination, Bio-AgNP and polymyxin B inhibited 4.9-100% of biofilm formation in the CR-Ab isolates and ATCC® 19606™. Meanwhile, when Bio-AgNP and polymyxin B were combined, disruption of 6.8-77.8% of biofilm formed was observed. Thus, antibiofilm activity against CR-Ab was demonstrated when Bio-AgNP was used alone or in combination with polymyxin B, emerging as an alternative in the control of CR-Ab strains.
Subject(s)
Acinetobacter baumannii , Anti-Bacterial Agents , Biofilms , Carbapenems , Metal Nanoparticles , Microbial Sensitivity Tests , Polymyxin B , Silver , Biofilms/drug effects , Acinetobacter baumannii/drug effects , Acinetobacter baumannii/physiology , Polymyxin B/pharmacology , Silver/pharmacology , Silver/chemistry , Anti-Bacterial Agents/pharmacology , Metal Nanoparticles/chemistry , Carbapenems/pharmacology , Acinetobacter Infections/microbiology , Acinetobacter Infections/drug therapy , Humans , Drug Synergism , Drug Resistance, BacterialABSTRACT
In this work, the hexane, chloroform, and methanol extracts from Kalanchoe fedtschenkoi were utilized to green-synthesize silver nanoparticles (Kf1-, Kf2-, and Kf3-AgNPs). The Kf1-, Kf2-, and Kf3-AgNPs were characterized by spectroscopy and microscopy techniques. The antibacterial activity of AgNPs was studied against bacteria strains, utilizing the microdilution assay. The DPPH and H2O2 assays were considered to assess the antioxidant activity of AgNPs. The results revealed that Kf1-, Kf2-, and Kf3-AgNPs exhibit an average diameter of 39.9, 111, and 42 nm, respectively. The calculated ζ-potential of Kf1-, Kf2-, and Kf3-AgNPs were -20.5, -10.6, and -7.9 mV, respectively. The UV-vis analysis of the three samples demonstrated characteristic absorption bands within the range of 350-450 nm, which confirmed the formation of AgNPs. The FTIR analysis of AgNPs exhibited a series of bands from 3500 to 750 cm-1, related to the presence of extracts on their surfaces. SEM observations unveiled that Kf1- and Kf2-AgNPs adopted structural arrangements related to nano-popcorns and nanoflowers, whereas Kf3-AgNPs were spherical in shape. It was determined that treatment with Kf1-, Kf2-, and Kf3-AgNPs was demonstrated to inhibit the growth of E. coli, S. aureus, and P. aeruginosa in a dose-dependent manner (50-300 µg/mL). Within the same range, treatment with Kf1-, Kf2-, and Kf3-AgNPs decreased the generation of DPPH (IC50 57.02-2.09 µg/mL) and H2O2 (IC50 3.15-3.45 µg/mL) radicals. This study highlights the importance of using inorganic nanomaterials to improve the biological performance of plant extracts as an efficient nanotechnological approach.
Subject(s)
Anti-Bacterial Agents , Antioxidants , Green Chemistry Technology , Kalanchoe , Metal Nanoparticles , Microbial Sensitivity Tests , Plant Extracts , Silver , Metal Nanoparticles/chemistry , Silver/chemistry , Silver/pharmacology , Plant Extracts/chemistry , Plant Extracts/pharmacology , Anti-Bacterial Agents/pharmacology , Anti-Bacterial Agents/chemistry , Anti-Bacterial Agents/chemical synthesis , Kalanchoe/chemistry , Antioxidants/pharmacology , Antioxidants/chemistry , Antioxidants/chemical synthesis , Biphenyl Compounds/antagonists & inhibitors , Biphenyl Compounds/chemistry , Picrates/antagonists & inhibitors , Picrates/chemistry , Escherichia coli/drug effects , Escherichia coli/growth & development , Hydrogen PeroxideABSTRACT
Dental implant success is threatened by peri-implantitis, an inflammation leading to implant failure. Conventional treatments struggle with the intricate microbial and host factors involved. Antibacterial membranes, acting as barriers and delivering antimicrobials, may offer a promising solution. Thus, this study highlights the potential of developing antibacterial membranes of poly-3-hydroxybutyrate and silver nanoparticles (Ag Nps) to address peri-implantitis challenges, discussing design and efficacy against potential pathogens. Electrospun membranes composed of PHB microfibers and Ag Nps were synthesized in a blend of DMF/chloroform at three different concentrations. Various studies were conducted on the characterization and antimicrobial activity of the membranes. The synthesized Ag Nps ranged from 4 to 8 nm in size. Furthermore, Young's modulus decreased, reducing from 13.308 MPa in PHB membranes without Ag Nps to 0.983 MPa in PHB membranes containing higher concentrations of Ag Nps. This demonstrates that adding Ag Nps results in a less stiff membrane. An increase in elongation at break was noted with the rise in Ag Nps concentration, from 23.597 % in PHB membranes to 60.136 % in PHB membranes loaded with Ag Nps. The antibiotic and antibiofilm activity of the membranes were evaluated against Pseudomonas aeruginosa, Staphylococcus aureus, Streptococcus mutans, and Candida albicans. The results indicated that all PHB membranes containing Ag Nps exhibited potent antibacterial activity by inhibiting the growth of biofilms and planktonic bacteria. However, inhibition of C. albicans occurred only with the PHB-Ag Nps C membrane. These findings emphasize the versatility and potential of Ag Nps-incorporated membranes as a multifunctional approach for preventing and addressing microbial infections associated with peri-implantitis. The combination of antibacterial and antibiofilm properties in these membranes holds promise for improving the management and treatment of peri-implantitis-related complications.
Subject(s)
Anti-Bacterial Agents , Biofilms , Hydroxybutyrates , Membranes, Artificial , Metal Nanoparticles , Peri-Implantitis , Silver , Silver/chemistry , Silver/pharmacology , Biofilms/drug effects , Anti-Bacterial Agents/pharmacology , Anti-Bacterial Agents/chemistry , Metal Nanoparticles/chemistry , Peri-Implantitis/drug therapy , Peri-Implantitis/microbiology , Hydroxybutyrates/chemistry , Hydroxybutyrates/pharmacology , Polyesters/chemistry , Microbial Sensitivity Tests , Humans , Staphylococcus aureus/drug effects , Pseudomonas aeruginosa/drug effects , Streptococcus mutans/drug effects , PolyhydroxybutyratesABSTRACT
The development of engineered nanomaterials has been considered a promising strategy to control oral infections. In this study, silver-embedded carbon nitrides (Ag@g-CN) were synthesized and tested against Candida albicans, investigating their antifungal action and biocompatibility in animal cells. Ag@g-CN was synthesized by a simple one-pot thermal polymerization technique and characterized by various analytical techniques. X-ray diffraction (XRD) analysis revealed slight alterations in the crystal structure of g-CN upon the incorporation of Ag. Fourier transform infrared (FT-IR) spectroscopy confirmed the presence of Ag-N bonds, indicating successful silver incorporation and potential interactions with g-CN's amino groups. UV-vis spectroscopy demonstrated a red shift in the absorption edge of Ag@g-CN compared with g-CN, attributed to the surface plasmon resonance effect of silver nanoparticles. Field emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM) confirmed the 2D layered sheet like morphology of both materials. The Ag 3d peaks found in X-ray photoelectron spectroscopy (XPS) confirmed the presence of metallic Ag0 nanoparticles in Ag@g-CN. The Ag@g-CN materials exhibited high antifungal activity against reference and oral clinical strains of C. albicans, with minimal inhibitory concentration (MIC) ranges between 16-256 µg/mL. The mechanism of Ag@g-CN on C. albicans was attributed to the disruption of the membrane integrity and disturbance of the biofilm. In addition, the Ag@g-CN material showed good biocompatibility in the fibroblastic cell line and in Galleria mellonella, with no apparent cytotoxicity observed at a concentration up to 1000 µg/mL. These findings demonstrate the potential of the Ag@g-CN material as an effective and safe antifungal agent for the treatment of oral fungal infections.
Subject(s)
Antifungal Agents , Candida albicans , Metal Nanoparticles , Silver , Candida albicans/drug effects , Silver/chemistry , Silver/pharmacology , Antifungal Agents/pharmacology , Antifungal Agents/chemistry , Antifungal Agents/chemical synthesis , Metal Nanoparticles/chemistry , Metal Nanoparticles/toxicity , Animals , Microbial Sensitivity Tests , Nitrogen Compounds/chemistry , Nitrogen Compounds/pharmacology , Nitrogen Compounds/toxicity , Mice , NitrilesABSTRACT
Phytopathogenic fungi significantly threaten global food security, causing substantial yield and quality losses. Sustainable solutions are urgently needed to combat these agricultural pathogens. This study explored the potential of silver (Ag), copper (Cu), and combined Ag/Cu nanoparticles capped with aminolevulinic acid (ALA) as antifungal agents. The nanoparticles (ALAAg, ALACu, and ALAAgCu) were synthesized via photoreduction and characterized using various techniques (UV-Vis, TEM, XRD, Zeta potential). Their antifungal activity against four key plant pathogens (Alternaria grandis, Colletotrichum truncatum, Corynespora cassiicola, and Fusarium oxysporum) was evaluated using poisoned food techniques. Notably, ALAAgCuNPs demonstrated superior antifungal activity compared to a conventional fungicide against two fungal strains. Even at lower concentrations, ALAAgCuNPs exhibited fungistatic effects comparable to those of the control. These promising results suggest the potential of ALAAgCu NPs as a broad-spectrum, potentially eco-friendly alternative for fungal control in plants and seeds. This approach is crucial for ensuring crop health, harvest quality, and food safety.
Subject(s)
Aminolevulinic Acid , Antifungal Agents , Copper , Fungi , Metal Nanoparticles , Plant Diseases , Silver , Copper/pharmacology , Copper/chemistry , Silver/pharmacology , Silver/chemistry , Metal Nanoparticles/chemistry , Plant Diseases/prevention & control , Plant Diseases/microbiology , Antifungal Agents/pharmacology , Fungi/drug effects , Aminolevulinic Acid/pharmacology , Microbial Sensitivity Tests , Fusarium/drug effectsABSTRACT
Due to its antimicrobial resistance characteristics, the World Health Organization (WHO) classifies A. baumannii as one of the critical priority pathogens for the development of new therapeutic strategies. Vaccination has been approached as an interesting strategy to overcome the lack of effective antimicrobials and the long time required to develop and approve new drugs. In this study, we aimed to evaluate as a vaccine the hypothetical adhesin protein CAM87009.1 in its recombinant format (rCAM87009.1) associated with aluminum hydroxide (Alhydrogel®) or biogenic silver nanoparticles (bio-AgNP) as adjuvant components against lethal infection by A. baumannii MDR strain. Both vaccine formulations were administered in three doses intramuscularly in BALB/c murine models and the vaccinated animals were tested in a challenge assay with A. baumannii MDR strain (DL100). rCAM87009.1 protein associated with both adjuvants was able to protect 100 % of animals challenged with the lethal strain during the challenge period. After the euthanasia of the animals, no A. baumannii colonies were detected in the lungs of animals vaccinated with the rCAM87009.1 protein in both formulations. Since the first immunization, high IgG antibody titers were observed (1:819,200), with results being statistically similar in both vaccine formulations evaluated. rCAM87009.1 associated with both adjuvants was capable of inducing at least one class of isotypes associated with the processes of neutralization (IgG2b and IgA for bio-AgNP and Alhydrogel®, respectively), opsonization (IgG1 in both vaccines) and complement activation (IgM and IgG3 for bio-AgNP and Alhydrogel®, respectively). Furthermore, reduced tissue damage was observed in animals vaccinated with rCAM87009.1 + bio-AgNP when compared to animals vaccinated with Alhydrogel®. Our results indicate that the rCAM87009.1 protein associated with both bio-AgNP and Alhydrogel® are combinations capable of promoting immunity against infections caused by A. baumannii MDR. Additionally, we demonstrate the potential of silver nanoparticles as alternative adjuvant molecules to the use of aluminum salts.
Subject(s)
Acinetobacter Infections , Acinetobacter baumannii , Adhesins, Bacterial , Adjuvants, Immunologic , Antibodies, Bacterial , Metal Nanoparticles , Mice, Inbred BALB C , Silver , Animals , Silver/administration & dosage , Silver/pharmacology , Acinetobacter baumannii/immunology , Acinetobacter baumannii/drug effects , Mice , Acinetobacter Infections/prevention & control , Acinetobacter Infections/immunology , Adhesins, Bacterial/immunology , Adjuvants, Immunologic/administration & dosage , Adjuvants, Immunologic/pharmacology , Antibodies, Bacterial/blood , Antibodies, Bacterial/immunology , Drug Resistance, Multiple, Bacterial , Bacterial Vaccines/immunology , Bacterial Vaccines/administration & dosage , Alum Compounds/administration & dosage , Female , Immunoglobulin G/blood , Immunoglobulin G/immunology , Disease Models, AnimalABSTRACT
Herein, four silver(I) complexes bearing acetylated d-galactopyranoside-based N-heterocyclic carbene ligands were synthesized and fully characterized by elemental analysis, NMR, and X-ray photoelectron spectroscopy. All complexes were obtained with an anomeric ß-configuration and as monocarbene species. In this study, we investigated the biological effects of the silver(I) complexes 2a-d on the human rhabdomyosarcoma cell line, RD. Our results show concentration-dependent effects on cell density, growth inhibition, and activation of key signaling pathways such as Akt 1/2, ERK 1/2, and p38-MAPK, indicating their potential as anticancer agents. Notably, at 35.5 µM, the complexes induced mitochondrial network disruption, as observed with 2b and 2c, whereas with 2a, this disruption was accompanied by nuclear content release. These results provide insight into the utility of carbohydrate incorporated NHC complexes of silver(I) as new agents in cancer therapy.
Subject(s)
Antineoplastic Agents , Cell Proliferation , Drug Screening Assays, Antitumor , Rhabdomyosarcoma , Silver , Humans , Acetylation , Antineoplastic Agents/pharmacology , Antineoplastic Agents/chemistry , Antineoplastic Agents/chemical synthesis , Cell Line, Tumor , Cell Proliferation/drug effects , Coordination Complexes/pharmacology , Coordination Complexes/chemistry , Coordination Complexes/chemical synthesis , Dose-Response Relationship, Drug , Galactose/chemistry , Galactose/pharmacology , Heterocyclic Compounds/chemistry , Heterocyclic Compounds/pharmacology , Heterocyclic Compounds/chemical synthesis , Methane/chemistry , Methane/analogs & derivatives , Methane/pharmacology , Methane/chemical synthesis , Molecular Structure , Rhabdomyosarcoma/drug therapy , Rhabdomyosarcoma/pathology , Silver/chemistry , Silver/pharmacology , Structure-Activity RelationshipABSTRACT
Aim: To investigate whether medical devices coated with a synthesized nanocomposite of poly(methylmethacrylate-co-dimethyl acrylamide) (PMMDMA) and silver nanoparticles (AgNPs) could improve their antibiofilm and antimicrobial activities. We also investigated the nanocomposite's safety. Materials & methods: The nanocomposite was synthesized and characterized using analytical techniques. Medical devices coated with the nanocomposite were evaluated for bacterial adhesion and hemolytic activity in vitro. Results: The nanocomposite formation was demonstrated with the incorporation of AgNPs into the polymer matrix. The nanocomposite proved to be nonhemolytic and significantly inhibited bacterial biofilm formation. Conclusion: The PMMDMA-AgNPs nanocomposite was more effective in preventing biofilm formation than PMMDMA alone and is a promising strategy for coating medical devices and reducing mortality due to hospital-acquired infections.
[Box: see text].
Subject(s)
Biofilms , Metal Nanoparticles , Nanocomposites , Silver , Biofilms/drug effects , Silver/chemistry , Silver/pharmacology , Nanocomposites/chemistry , Metal Nanoparticles/chemistry , Humans , Anti-Bacterial Agents/pharmacology , Anti-Bacterial Agents/chemistry , Bacterial Adhesion/drug effects , Equipment and Supplies/microbiology , Hemolysis/drug effects , Acrylamides/chemistry , Acrylamides/pharmacologyABSTRACT
OBJECTIVES: To incorporate the nanostructured silver vanadate decorated with silver nanoparticles (AgVO3) into denture base materials: heat-cured (HC) and 3D printed (3DP) resins, at concentrations of 2.5 %, 5 %, and 10 %; and to evaluate the antimicrobial activity in two multi-species biofilm: (1) Candida albicans, Candida glabrata, and Streptococcus mutans, (2) Candida albicans, Pseudomonas aeruginosa, and Staphylococcus aureus, and the wettability. METHODS: The AgVO3 was added to the HC powder, and printed samples were coated with 3DP with AgVO3 incorporated. After biofilm formation, the antimicrobial activity was evaluated by colony forming units per milliliter (CFU/mL), metabolic activity, and epifluorescence microscopy. Wettability was assessed by the contact angles with water and artificial saliva. RESULTS: In biofilm (1), HC-5 % and HC-10 % showed activity against S. mutans, HC-10 % against C. glabrata, and HC-10 % and 3DP-10 % had higher CFU/mL of C. albicans. 3DP-5 % had lower metabolic activity than the 3DP control. In biofilm (2), HC-10 % reduced S. aureus and P. aeruginosa, and HC-5 %, 3DP-2.5 %, and 3DP-5 % reduced S. aureus. 3DP incorporated with AgVO3, HC-5 %, and HC-10 % reduced biofilm (2) metabolic activity. 3DP-5 % and 3DP-10 % increased wettability with water and saliva. CONCLUSION: HC-10 % was effective against C. glabrata, S. mutans, P. aeruginosa, and S. aureus, and HC-5 % reduced S. mutans and S. aureus. For 3DP, 2.5 % and 5 % reduced S. aureus. The incorporation of AgVO3 into both resins reduced the metabolic activity of biofilms but had no effect on C. albicans. The wettability of the 3DP with water and saliva increased with the addition of AgVO3. CLINICAL SIGNIFICANCE: The incorporation of silver vanadate into the denture base materials provides antimicrobial efficacy and can prevent the aggravation of oral and systemic diseases. The incorporation of nanomaterials into printed resins is challenging and the coating is an alternative to obtain the inner denture base with antimicrobial effect.
Subject(s)
Biofilms , Candida albicans , Denture Bases , Metal Nanoparticles , Pseudomonas aeruginosa , Silver , Staphylococcus aureus , Streptococcus mutans , Vanadates , Wettability , Biofilms/drug effects , Streptococcus mutans/drug effects , Candida albicans/drug effects , Staphylococcus aureus/drug effects , Vanadates/pharmacology , Vanadates/chemistry , Pseudomonas aeruginosa/drug effects , Silver/pharmacology , Silver/chemistry , Denture Bases/microbiology , Metal Nanoparticles/chemistry , Anti-Infective Agents/pharmacology , Candida glabrata/drug effects , Printing, Three-Dimensional , Materials Testing , Humans , Nanostructures , Silver Compounds/pharmacology , Silver Compounds/chemistry , Dental Materials/chemistry , Dental Materials/pharmacologyABSTRACT
The environment preservation has been an important motivation to find alternative, functional, and biodegradable materials to replace polluting petrochemicals. The production of nonbiodegradable face masks increased the concentration of microplastics in the environment, highlighting the need for sustainable alternatives, such as the use of local by-products to create efficient and eco-friendly filtering materials. Furthermore, the use of smart materials can reduce the risk of contagion and virus transmission, especially in the face of possible mutations. The development of novel materials is necessary to ensure less risk of contagion and virus transmission, as well as to preserve the environment. Taking these factors into account, 16 systems were developed with different combinations of precursor materials (holocellulose, polyaniline [ES-PANI], graphene oxide [GO], silver nanoparticles [AgNPs], and activated carbon [AC]). Adsorption tests of the spike protein showed that the systems containing GO and AC were the most efficient in the adsorption process. Similarly, plate tests conducted using the VSV-IN strain cultured in HepG2 cells showed that the system containing all phases showed the greatest reduction in viral titer method. In agreement, the biocompatibility tests showed that the compounds extracted from the systems showed low cytotoxicity or no significant cytotoxic effect in human fibroblasts. As a result, the adsorption tests of the spike protein, viral titration, and biocompatibility tests showed that systems labeled as I and J were the most efficient. In this context, the present research has significantly contributed to the technological development of antiviral systems, with improved properties and increased adsorption efficiency, reducing the viral titer and contributing efficiently to public health. In this way, these alternative materials could be employed in sensors and devices for filtering and sanitization, thus assisting in mitigating the transmission of viruses and bacteria. RESEARCH HIGHLIGHTS: Sixteen virus adsorbent systems were developed with different combinations of precursor materials (holocellulose, polyaniline (ES-PANI), graphene oxide (GO), silver nanoparticles (AgNPs), and activated carbon (AC)). The system that included all of the nanocomposites holocellulose, PANI, GO, AgNPs, and AC showed the greatest reduction in viral titration. The biocompatibility tests revealed that all systems caused only mild or moderate cytotoxicity toward human fibroblasts.