Your browser doesn't support javascript.
loading
Montrer: 20 | 50 | 100
Résultats 1 - 4 de 4
Filtrer
Plus de filtres











Base de données
Gamme d'année
1.
J Environ Manage ; 330: 117206, 2023 Mar 15.
Article de Anglais | MEDLINE | ID: mdl-36621312

RÉSUMÉ

The increasing usage of phosphate fertilizers for agricultural purposes has led to an augmented level of phosphorus in watercourses negatively impacting the ecosystems and water quality warranting its amputation from polluted water. This article describes the preparation of a novel natural deep eutectic solvent (NADES) functionalized-celite/polyethylene glycol hydrogel nanocomposite (NADES-Cel/PEG HNC) for adsorptive phosphate removal from water. The XRD, FTIR, SEM coupled with EDX spectroscopy, TEM, BET analysis, and pHpzc measurement were used to characterise the prepared material. Central composite design (CCD) in response surface methodology (RSM) was used for experimental design to analyse the individual and combined impact of five operational parameters on equilibrium adsorption capacity (Qe), and evaluate the optimal operating conditions by numerical optimization, which were obtained as: contact time (60 min), adsorbent dosage (1.0 g/L), initial [PO43-] (80 mg/L), initial solution pH (3.5), and temperature (304 K). The adsorption process was best explicated via Langmuir adsorption isotherm with a noteworthy saturation capacity, Qm of 111.80 mg PO43-/g at 298 K, and was favourable (S* = 0.99), feasible (ΔG° = -7.02 kJ/mol), exothermic (ΔH° = -8.39 kJ/mol) and physical in nature. The uptake mechanism largely involved H-bonding, electrostatic interaction, n-π interaction and pore-filling. Uptake kinetics of PO43- was best explicated by pseudo-second order model, and the rate-determining step involved both intraparticle and liquid film diffusion mechanisms. The admirable performance of NADES-Cel/PEG HNC was signified by its competent adsorption efficacy and effectual reusability. The pertinence of the hydrogel nanocomposite for treatment of real wastewater was tested. Hence, NADES-Cel/PEG HNC might prove to be a pragmatic adsorbent for decontamination of PO43- from an aqueous environment.


Sujet(s)
Nanocomposites , Polluants chimiques de l'eau , Thermodynamique , Terre de diatomée , Solvants eutectiques profonds , Solvants , Adsorption , Phosphates , Plan de recherche , Écosystème , Matériaux biocompatibles , Cinétique , Nanocomposites/composition chimique , Glycine , Polyéthylène glycols , Fructose , Polluants chimiques de l'eau/composition chimique , Concentration en ions d'hydrogène
2.
Langmuir ; 38(27): 8280-8295, 2022 07 12.
Article de Anglais | MEDLINE | ID: mdl-35758902

RÉSUMÉ

In the present investigation, a novel, green, and economical dual-functionalized pullulan/kaolin hydrogel nanocomposite (f-PKHN) was fabricated and subsequently applied for the liquid-phase decontamination of paracetamol (PCT), a pharmaceutical pollutant. Pullulan and kaolin were functionalized with l-asparagine and gallic acid, respectively. The physicochemical facets of the functionalized pullulan/kaolin hydrogel nanocomposite and its interactive behavior with PCT were elucidated by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDX), and elemental mapping. The process parameters along with the isotherm, kinetics, and thermodynamics were methodically appraised via a batch technique to unveil the adsorption performance of the as-fabricated hydrogel nanocomposite. The adsorption isotherm and kinetics of PCT uptake by f-PKHN conform well to Freundlich and pseudo-second-order models, respectively. Relying on hydrogen bonding, n-π, and van der Waals interactions, the maximum adsorption capacity was 332.54 mg g-1, higher than for most of the previous adsorbents reported in the literature for PCT removal. Thermodynamic calculations corroborated endothermic, spontaneous, and feasible adsorption phenomena. The maintenance of a high uptake percentage (69.11%) in the fifth consecutive adsorption-desorption cycle implied the significant reusable potential of f-PKHN. Swelling studies exhibited 90% swelling within 200 min, indicating the successful fabrication of a cross-linked hydrogel network. The real water (distilled water, tap water, and river water) samples spiked with PCT specified a significant uptake of PCT (>85%), and the minor influence of ionic strength on the adsorptive potential of f-PKHN validated its potentiality for the decontamination of real effluents. In conclusion, f-PKHN with substantial adsorption capacity, green characteristics, and excellent reusability can be reckoned with as a promising adsorbent for the de-escalation of PCT from aquatic sources as well as at the industrial level.


Sujet(s)
Nanocomposites , Polluants chimiques de l'eau , Acétaminophène , Adsorption , Glucanes , Hydrogels , Concentration en ions d'hydrogène , Kaolin , Cinétique , Nanocomposites/composition chimique , Spectroscopie infrarouge à transformée de Fourier , Thermodynamique , Eaux usées/composition chimique , Eau , Polluants chimiques de l'eau/analyse
3.
Environ Res ; 213: 113712, 2022 10.
Article de Anglais | MEDLINE | ID: mdl-35718168

RÉSUMÉ

The adsorption of acridine orange and Cr6+ ion onto plaster of paris reinforced glutamic acid-grafted-polyacrylamide hydrogel nanocomposite modified with riboflavin, Glu-g-PAM/POP/Rb HNC was studied. The Glu-g-PAM/POP/Rb HNC was physico-chemically characterized by Fourier transform infrared spectroscopy, X-ray diffraction analysis, scanning electron microscopy coupled with energy dispersive X-ray spectroscopy, transmission electron microscopy and Brunauer-Emmett-Teller analysis. The specific surface area, pore volume and pore diameter were 15.48 m2/g, 0.015 cm3/g and 4.23 nm, respectively. Adsorption process was strategized by response surface methodology (RSM) based on a 3-level 5-factor (initial solution pH, contact time, adsorbent dose, initial adsorbate concentration and temperature) central composite design (CCD), and validity of the estimated parameters was statistically evaluated using analysis of variance (ANOVA). The optimized operating variables were: pH (AO = 10; Cr6+ = 4.15), contact time (AO = 60 min; Cr6+ = 59 min), adsorbent dose (0.8 g/L), initial adsorbate concentration (60 mg/L) and temperature (298 K). Isotherm results were coincident with Langmuir isotherm model. The experimental kinetic adsorption data was congruous with pseudo-second order model, with the uptake rate controlled by both intraparticle and liquid film diffusions. The relatively high Langmuir saturation capacity of 202.63 mg AO/g and 143.68 mg Cr6+/g, supported by the decent recyclability up to four times affirmed the promising performance of the adsorbent. The efficacy of the adsorbent for simultaneous removal of AO and Cr6+ from bi-component system was assessed. The possible adsorption mechanism mainly involved hydrogen bonding, van der Waals forces, electrostatic and π-π interactions. Adsorption of AO and Cr6+ onto Glu-g-PAM/POP/Rb HNC was feasible and exothermic as revealed by the thermodynamic parameters. The findings demonstrated superior adsorbent efficacy for the seizure of pollutants, particularly AO and Cr6+ from aqueous solution.


Sujet(s)
Nanocomposites , Polluants chimiques de l'eau , Orange acridine/analyse , Orange acridine/composition chimique , Résines acryliques , Adsorption , Sulfate de calcium , Acide glutamique , Hydrogels , Concentration en ions d'hydrogène , Cinétique , Riboflavine/analyse , Spectroscopie infrarouge à transformée de Fourier , Thermodynamique , Polluants chimiques de l'eau/analyse
4.
Chemosphere ; 289: 133232, 2022 Feb.
Article de Anglais | MEDLINE | ID: mdl-34896178

RÉSUMÉ

Herein, a functionalized green hydrogel nanocomposite based on carboxymethylated gum tragacanth and nanobentonite (GTBCH) was designed via free-radical polymerization approach for the elimination of Aspartame (AS) from wastewater. The GTBCH fabrication was validated by Fourier Transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Transmission electron microscopy (TEM), scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDX) techniques. Central composite design (CCD) was efficaciously applied to determine the quadratic polynomial approach for predicting the adsorption capacity (qe) of AS. The optimum sequestration conditions were dosage (0.8 g L‒1), agitation time (35 min) initial AS concentration (60 mg L-1), pH (6) and temperature (308 K). The CCD results revealed that dosage of GTBCH and initial concentration have greater impact on qe followed by pH, time, and temperature. The significant adsorption capacity (392.04 mg g-1), calculated from Langmuir model, could be attributed to the stronger interactions prevalent between AS and GTBCH. Diffusion investigations depicted the uptake of AS via surface adsorption, liquid film and intraparticle diffusion, respectively. Ionic strength and real water have minor effect on the adsorption capacity demonstrating electrostatic interaction has least impact in adsorption process. The pHzpc, FTIR and XPS investigations revealed hydrogen bonding, n-π and van der Waals interactions as the principal removal mechanisms. Robust design, high adsorption capacity, eco-friendly facets along with excellent reusability indicated the GTBCH as a competent adsorbent for AS decontamination from wastewater.


Sujet(s)
Nanocomposites , Polluants chimiques de l'eau , Adsorption , Aspartame , Hydrogels , Concentration en ions d'hydrogène , Cinétique , Spectroscopie infrarouge à transformée de Fourier , Eau
SÉLECTION CITATIONS
DÉTAIL DE RECHERCHE