Your browser doesn't support javascript.
loading
Montrer: 20 | 50 | 100
Résultats 1 - 7 de 7
Filtrer
Plus de filtres










Base de données
Gamme d'année
1.
RSC Adv ; 12(8): 4536-4542, 2022 Feb 03.
Article de Anglais | MEDLINE | ID: mdl-35425515

RÉSUMÉ

A simple, accurate and fast method was developed for the assessment of 3-nitrotyrosine as a biomarker for the early diagnosis of liver cirrhosis with minimal hepatic encephalopathy (MHE) using a (Eu(TTA)3Phen) photo probe. 3-Nitrotyrosine can remarkably quench the luminescence intensity of the (Eu(TTA)3Phen) complex in DMSO at pH = 9 and λ em = 617 nm. The quenching of the luminescence intensity of (Eu(TTA)3Phen) complex particularly the electrical emission band at λ em = 617 nm is used for the assessment of 3-nitrotyrosine in different serum samples of patients with liver cirrhosis.

2.
Chemosphere ; 292: 133369, 2022 Apr.
Article de Anglais | MEDLINE | ID: mdl-34953879

RÉSUMÉ

Metal-organic frameworks (MOFs) are significantly tunable materials that can be exploited in a wide range of applications. In recent years, a large number of studies have been focused on synthesizing nano-scale MOFs (nanoMOFs), thus taking advantage of these unique materials in various applications, especially those that are only possible at nano-scale. One of the technologies where nanoMOF materials occupy a central role is the membrane technology as one of the most efficient separation techniques. Therefore, numerous reports can be found on the enhancement of the physicochemical properties of polymeric membranes by using nanoMOFs, leading to remarkably improved performance. One of the most considerable applications of these nanoMOF-based membranes is in water treatment systems, because freshwater scarcity is now an undeniable crisis facing humanity. In this in-depth review, the most prominent synthesis and post-synthesis methods for the fabrication of nanoMOFs are initially discussed. Afterwards, different nanoMOF-based composite membranes such as thin-film nanocomposites (TFN) and mixed-matrix membranes (MMM) and their various fabrication methods are reviewed and compared. Then, the impacts of using MOFs-based membranes for water purification through growing metal-organic frameworks crystals on the support materials and utilization of metal-organic frameworks as fillers in mixed matrix membrane (MMM) are highlighted. Finally, a summary of pros and cons of using nanoMOFs in membrane technology for water treatment purposes and clear future prospects and research potentials are presented.


Sujet(s)
Réseaux organométalliques , Nanocomposites , Purification de l'eau
3.
ACS Omega ; 6(32): 20812-20821, 2021 Aug 17.
Article de Anglais | MEDLINE | ID: mdl-34423189

RÉSUMÉ

The urge for sensitive, facile, minimally invasive, and fast detection method of CA-125, a significant and crucial biomarker in ovarian malignancy, is currently substantial. This paper describes the detailed construction and characterization of a newly designed optical nano-biosensor to detect CA-125 accurately and sensitively. The fabricated sensor consists of a nano-gold thin film doped into a matrix of sol-gel, exhibiting a centered fluorescence band at 423 nm when excited at 340 nm. The quantification of CA-125 relies on its quenching ability of this fluorescence signal. The sensor was challenged to evaluate its sensitivity and specificity in detecting CA-125 present in samples collected from ovarian cancer diagnosed patients and compared to samples from healthy women as a control. Our findings revealed that the developed biosensor had a sensitivity of 97.35% and a specificity of 94.29%. Additionally, a wide linearity range over 2.0-127.0 U mL-1 for CA-125 was achieved with a detection limit of 1.45 U mL-1. Furthermore, the sensor could successfully discriminate samples between healthy and diseased people, which demonstrates its suitability in CA-125 assessment.

4.
RSC Adv ; 11(53): 33326-33333, 2021 Oct 08.
Article de Anglais | MEDLINE | ID: mdl-35497545

RÉSUMÉ

An innovative, simple and cost effective Tb3+-atorvastatin photo probe was designed and used as a core for a spectrofluorometric approach to sensitively determine two vital biological compounds in serum samples. Tb3+-atorvastatin complex displays a characteristic electrical band with λ em at 545 nm with significant luminescence intensity, which is quenched in the presence of progesterone and testosterone at two variant sets of pH; 6.2 and 7.5, respectively. The conditions were optimized and the best solvent for operation was found to be acetonitrile with λ ex at 320 nm. Progesterone and testosterone were assessed in serum samples using the same optimal conditions within concentration ranges of 2 × 10-9 to 2.9 × 10-6 and 3.1 × 10-9 to 4.8 × 10-6 mol L-1, respectively. The proposed luminescence method was validated in accordance to ICH guidelines and found to be accurate, precise and specific and free from any interference. The cost effectiveness and applicability of the method make it a good choice for routine analysis of the two compounds and early diagnosis of chronic diseases associated with abnormalities in their physiological levels.

5.
RSC Adv ; 11(52): 32861-32872, 2021 Oct 04.
Article de Anglais | MEDLINE | ID: mdl-35493587

RÉSUMÉ

An innovative, simple and cost effective Tb3+-simvastatin photo probe was designed and used as a core for a spectrofluorometric approach to sensitively determine four vital biological compounds in different matrices. A Tb3+-simvastatin complex displays a characteristic electrical band with λ em at 545 nm with significant luminescence intensity, which is quenched in the presence of folic acid, progesterone, testosterone and vitamin D3 at four variant sets of pH: 5.0, 6.2, 7.5 and 9.0, respectively. The conditions were optimized and the best solvent for operation was found to be acetonitrile at λ ex at 340 nm. Folic acid was successfully estimated in tablet dosage form, urine and serum in the concentration range of 2.49 × 10-9 to 1.28 × 10-6 mol L-1. Progesterone, testosterone and vitamin D3 were also assessed in serum samples using the same optimal conditions within concentration ranges of 5 × 10-9 to 1.9 × 10-6, 5 × 10-9 to 2.8 × 10-6 and 5 × 10-9 to 4.2 × 10-6 mol L-1, respectively. The proposed luminescence method was validated in accordance with ICH guidelines and found to be accurate, precise, and specific and free from any interference at the working pH for each analyte. The cost effectiveness and applicability of the method make it a good choice for routine analysis of the four compounds and early diagnosis of chronic diseases associated with abnormalities in their physiological levels.

6.
RSC Adv ; 11(47): 29797-29806, 2021 Sep 01.
Article de Anglais | MEDLINE | ID: mdl-35479534

RÉSUMÉ

A rapid and selective LC-MS/MS method is described for the simultaneous assay of Avanafil and Dapoxetine in human plasma via a protein precipitation (PP) sample preparation technique. Tadalafil was chosen as the internal standard reaching good recovery and reproducibility while diminishing the effects of the matrix. An Agilent Zorbax Eclipse XDB C18 column (4.6 × 50 mm, 1.8 µm) was used for the chromatographic separation and analysis, while 0.1% formic acid : acetonitrile (60 : 40, v/v) was utilized at a flow rate of 0.5 mL min-1. It was revealed that 6 min stop time accomplished the best separation. The assay was linear over the range of 10-6000 ng mL-1 for both drugs. The established bio-analytical method validation was demonstrated following US-FDA recommendations including sensitivity, selectivity, linearity, accuracy and precision. Furthermore, other validation parameters were assessed such as the dilution integrity, matrix effect, carryover, and analyte stability during both short- and long-term sample processing and storage. The adopted method was efficaciously applied to a clinical study for the concurrent determination of Avanafil and Dapoxetine in human plasma.

7.
ACS Omega ; 5(11): 5629-5637, 2020 Mar 24.
Article de Anglais | MEDLINE | ID: mdl-32226838

RÉSUMÉ

We developed a novel, simple, sensitive, accurate, and precise method for the determination of calcitonin in different serum samples with medullar thyroid carcinoma. The designed flower-like thin film gold nanoparticles doped in a sol-gel/polyethylene glycol mold are used as an optical biosensor for the efficient determination of calcitonin. The sensor was characterized by transmission electron microscopy, scanning electron microscopy, X-ray diffraction, energy-dispersive X-ray microanalysis, and Fourier-transform infrared spectroscopy. The efficiency of the considered bio-sensor is done using the quencher calcitonin of the emission band at 360 nm of biomarker obtained at λex = 333 nm in acetonitrile solvent. The sensing mechanism was based on fluorescence resonance energy transfer. The remarkable quenching of the fluorescence intensity at 360 nm of optical sensor by various concentrations of calcitonin was successfully used as an optical biosensor for the assessment of calcitonin for different serum samples of patients with medullar thyroid carcinoma. The calibration plot was prepared for the concentration range 0.01-1000 pg/mL of calcitonin with a correlation coefficient of 0.99 and a detection limit of 0.707 pg/mL. The suggested method augments the sensitivity of calcitonin as a useful biomarker for the early diagnosis of medullar thyroid carcinoma. This method is considered as a gateway for the construction of a new prototype for the follow-up of thyroid cancer in the spinal cord during and after treatment.

SÉLECTION CITATIONS
DÉTAIL DE RECHERCHE
...