RÉSUMÉ
We describe a method for direct tRNA sequencing using the Oxford Nanopore MinION. The principal technical advance is custom adapters that facilitate end-to-end sequencing of individual transfer RNA (tRNA) molecules at subnanometer precision. A second advance is a nanopore sequencing pipeline optimized for tRNA. We tested this method using purified E. coli tRNAfMet, tRNALys, and tRNAPhe samples. 76-92% of individual aligned tRNA sequence reads were full length. As a proof of concept, we showed that nanopore sequencing detected all 43 expected isoacceptors in total E. coli MRE600 tRNA as well as isodecoders that further define that tRNA population. Alignment-based comparisons between the three purified tRNAs and their synthetic controls revealed systematic nucleotide miscalls that were diagnostic of known modifications. Systematic miscalls were also observed proximal to known modifications in total E. coli tRNA alignments, including a highly conserved pseudouridine in the T loop. This work highlights the potential of nanopore direct tRNA sequencing as well as improvements needed to implement tRNA sequencing for human healthcare applications.
Sujet(s)
Séquençage par nanopores , Nanopores , Escherichia coli/génétique , Séquençage nucléotidique à haut débit , Humains , NucléotidesRÉSUMÉ
Historically, RNA has been sequenced as cDNA copies derived from reverse transcription of cellular RNA followed by PCR amplification. Recently, RNA sequencing using nanopores has emerged as an alternative. Using this technology, individual cellular RNA strands are read directly as they are driven through nanoscale pores by an applied voltage. The speed of translocation is regulated by a helicase that is loaded onto each RNA strand by an adapter that also facilitates capture by the nanopore electric field. Here we describe a technique for adapting human ribosomal RNA subunits for nanopore sequencing. Using this strategy, a single Oxford Nanopore MinION run delivered 470,907 sequence reads of which 396,048 aligned to ribosomal RNA, with 28S, 18S, 5.8S, and 5S coverage of 6053, 369,472, 16,058, and 4465 reads, respectively. Example alignments that reveal putative nucleotide modifications are provided.
Sujet(s)
Séquençage par nanopores/méthodes , Nucléotides/génétique , ARN ribosomique/génétique , Analyse de séquence d'ARN/méthodes , Humains , Nanopores , Analyse de séquence d'ADN/méthodesRÉSUMÉ
Determining the layers of gene regulation within the innate immune response is critical to our understanding of the cellular responses to infection and dysregulation in disease. We identified a conserved mechanism of gene regulation in human and mouse via changes in alternative first exon (AFE) usage following inflammation, resulting in changes to the isoforms produced. Of these AFE events, we identified 95 unannotated transcription start sites in mice using a de novo transcriptome generated by long-read native RNA-sequencing, one of which is in the cytosolic receptor for dsDNA and known inflammatory inducible gene, Aim2. We show that this unannotated AFE isoform of Aim2 is the predominant isoform expressed during inflammation and contains an iron-responsive element in its 5'UTR enabling mRNA translation to be regulated by iron levels. This work highlights the importance of examining alternative isoform changes and translational regulation in the innate immune response and uncovers novel regulatory mechanisms of Aim2.
Sujet(s)
Épissage alternatif , Protéines de liaison à l'ADN/génétique , Exons , Immunité innée/génétique , Inflammation/génétique , Macrophages/métabolisme , Régions 5' non traduites , Animaux , Cellules cultivées , Protéines de liaison à l'ADN/métabolisme , Analyse de profil d'expression de gènes , Humains , Inflammation/immunologie , Inflammation/métabolisme , Macrophages/immunologie , Souris , Régions promotrices (génétique) , TranscriptomeRÉSUMÉ
Proteins present a significant challenge for nanopore-based sequence analysis. This is partly due to their stable tertiary structures that must be unfolded for linear translocation, and the absence of regular charge density. To address these challenges, here we describe how ClpXP, an ATP-dependent protein unfoldase, can be harnessed to unfold and processively translocate multi-domain protein substrates through an alpha-hemolysin nanopore sensor. This process results in ionic current patterns that are diagnostic of protein sequence and structure at the single-molecule level.
Sujet(s)
Endopeptidase Clp/métabolisme , Hémolysines/composition chimique , Hémolysines/métabolisme , Double couche lipidique/métabolisme , Nanopores , Dépliement des protéines , Transport des protéinesRÉSUMÉ
Transfer RNAs (tRNA) are the most common RNA molecules in cells and have critical roles as both translators of the genetic code and regulators of protein synthesis. As such, numerous methods have focused on studying tRNA abundance and regulation, with the most widely used methods being RNA-seq and microarrays. Though revolutionary to transcriptomics, these assays are limited by an inability to encode tRNA modifications in the requisite cDNA. These modifications are abundant in tRNA and critical to their function. Here, we describe proof-of-concept experiments where individual tRNA molecules are examined as linear strands using a biological nanopore. This method utilizes an enzymatically ligated synthetic DNA adapter to concentrate tRNA at the lipid bilayer of the nanopore device and efficiently denature individual tRNA molecules, as they are pulled through the α-hemolysin (α-HL) nanopore. Additionally, the DNA adapter provides a loading site for Ï29 DNA polymerase (Ï29 DNAP), which acts as a brake on the translocating tRNA. This increases the dwell time of adapted tRNA in the nanopore, allowing us to identify the region of the nanopore signal that is produced by the translocating tRNA itself. Using adapter-modified Escherichia coli tRNA(fMet) and tRNA(Lys), we show that the nanopore signal during controlled translocation is dependent on the identity of the tRNA. This confirms that adapter-modified tRNA can translocate end-to-end through nanopores and provide the foundation for future work in direct sequencing of individual transfer RNA with a nanopore-based device.
RÉSUMÉ
Cytosine, 5-methylcytosine, and 5-hydroxymethylcytosine were identified during translocation of single DNA template strands through a modified Mycobacterium smegmatis porin A (M2MspA) nanopore under control of phi29 DNA polymerase. This identification was based on three consecutive ionic current states that correspond to passage of modified or unmodified CG dinucleotides and their immediate neighbors through the nanopore limiting aperture. To establish quality scores for these calls, we examined ~3,300 translocation events for 48 distinct DNA constructs. Each experiment analyzed a mixture of cytosine-, 5-methylcytosine-, and 5-hydroxymethylcytosine-bearing DNA strands that contained a marker that independently established the correct cytosine methylation status at the target CG of each molecule tested. To calculate error rates for these calls, we established decision boundaries using a variety of machine-learning methods. These error rates depended upon the identity of the bases immediately 5' and 3' of the targeted CG dinucleotide, and ranged from 1.7% to 12.2% for a single-pass read. We estimate that Q40 values (0.01% error rates) for methylation status calls could be achieved by reading single molecules 5-19 times depending upon sequence context.
Sujet(s)
5-Méthyl-cytosine/isolement et purification , Cytosine/analogues et dérivés , Cytosine/isolement et purification , Méthylation de l'ADN/génétique , ADN/analyse , Épigénomique/méthodes , Nanopores , 5-Méthyl-cytosine/composition chimique , Cytosine/composition chimique , Plan de rechercheRÉSUMÉ
We present a novel application of active voltage control of DNA captured in a nanopore to regulate the amount of time the DNA is available to molecules in the bulk phase that bind to the DNA. In this work, the control method is used to measure hybridization between a single molecule of DNA captured in a nanopore and complementary oligonucleotides in the bulk phase. We examine the effect of oligonucleotide length on hybridization, and the effect of DNA length heterogeneity on the measurements. Using a mathematical model, we are able to deduce the binding rate of complementary oligonucleotides, even when DNA samples in experiments are affected by heterogeneity in length. We analyze the lifetime distribution of DNA duplexes that are formed in the bulk phase and then pulled against the pore by reversing the voltage. The lifetime distribution reveals several dissociation modes. It remains to be resolved whether these dissociation modes are due to DNA heterogeneity or correspond to different states of duplex DNA. The control method is unique in its ability to detect single-molecule complex assembly in the bulk phase, free from external force and with a broad (millisecond-to-second) temporal range.
Sujet(s)
ADN/composition chimique , ADN/génétique , Nanopores , Hybridation d'acides nucléiques/méthodes , Séquence nucléotidique , ADN/métabolisme , DNA-directed DNA polymerase/métabolisme , Électricité , Cinétique , Modèles moléculaires , Conformation d'acide nucléique , Oligodésoxyribonucléotides/composition chimique , Oligodésoxyribonucléotides/génétique , Facteurs tempsRÉSUMÉ
DNA polymerases catalyze template-dependent genome replication. The assembly of a high affinity ternary complex between these enzymes, the double strand-single strand junction of their DNA substrate, and the deoxynucleoside triphosphate (dNTP) complementary to the first template base in the polymerase active site is essential to this process. We present a single molecule method for iterative measurements of DNA-polymerase complex assembly with high temporal resolution, using active voltage control of individual DNA substrate molecules tethered noncovalently in an alpha-hemolysin nanopore. DNA binding states of the Klenow fragment of Escherichia coli DNA polymerase I (KF) were diagnosed based upon their ionic current signature, and reacted to with submillisecond precision to execute voltage changes that controlled exposure of the DNA substrate to KF and dNTP. Precise control of exposure times allowed measurements of DNA-KF complex assembly on a time scale that superimposed with the rate of KF binding. Hundreds of measurements were made with a single tethered DNA molecule within seconds, and dozens of molecules can be tethered within a single experiment. This approach allows statistically robust analysis of the assembly of complexes between DNA and RNA processing enzymes and their substrates at the single molecule level.
Sujet(s)
DNA-directed DNA polymerase/métabolisme , ADN/métabolisme , Toxines bactériennes/composition chimique , Séquence nucléotidique , ADN/composition chimique , ADN/génétique , DNA polymerase I/composition chimique , DNA polymerase I/métabolisme , DNA-directed DNA polymerase/composition chimique , Hémolysines/composition chimique , Structures macromoléculaires , Modèles biologiques , Modèles moléculaires , Données de séquences moléculaires , Nanostructures/composition chimique , Nanotechnologie , Électricité statiqueRÉSUMÉ
Nanoscale pores have potential to be used as biosensors and are an established tool for analysing the structure and composition of single DNA or RNA molecules. Recently, nanopores have been used to measure the binding of enzymes to their DNA substrates. In this technique, a polynucleotide bound to an enzyme is drawn into the nanopore by an applied voltage. The force exerted on the charged backbone of the polynucleotide by the electric field is used to examine the enzyme-polynucleotide interactions. Here we show that a nanopore sensor can accurately identify DNA templates bound in the catalytic site of individual DNA polymerase molecules. Discrimination among unbound DNA, binary DNA/polymerase complexes, and ternary DNA/polymerase/deoxynucleotide triphosphate complexes was achieved in real time using finite state machine logic. This technique is applicable to numerous enzymes that bind or modify DNA or RNA including exonucleases, kinases and other polymerases.
Sujet(s)
Dosage biologique/méthodes , DNA-directed DNA polymerase/composition chimique , ADN/composition chimique , Nanostructures/composition chimique , Nanostructures/ultrastructure , Nanotechnologie/méthodes , Séquence d'acides aminés , Sites de fixation , Structures macromoléculaires/composition chimique , Données de séquences moléculaires , Porosité , Liaison aux protéinesRÉSUMÉ
We describe the maternal-effect and zygotic phenotypes of null mutations in the Drosophila gene for the epsilon-subunit of mitochondrial ATP synthase, stunted (sun). Loss of zygotic sun expression leads to a dramatic delay in the growth rate of first instar larvae and ultimately death. Embryos lacking maternally supplied sun (sun embryos) have a sixfold reduction in ATP synthase activity. Cellular analysis of sun embryos shows defects only after the nuclei have migrated to the cortex. During the cortical divisions the actin-based metaphase and cellularization furrows do not form properly, and the nuclei show abnormal spacing and division failures. The most striking abnormality is that nuclei and spindles form lines and clusters, instead of adopting a regular spacing. This is reflected in a failure to properly position neighboring nonsister centrosomes during the telophase-to-interphase transition of the cortical divisions. Our study is consistent with a role for Sun in mitochondrial ATP synthesis and suggests that reduced ATP levels selectively affect molecular motors. As Sun has been identified as the ligand for the Methuselah receptor that regulates aging, Sun may function both within and outside mitochondria.