RÉSUMÉ
Advanced materials undergo a complex and lengthy process of maturation for scaling up and deployment, mainly due to the high cost of their precursors. Therefore, it is highly desirable to fabricate highly valuable advanced porous solid-state materials, with proven applicability, by sustainably combining organic and inorganic waste materials as precursors. This study successfully demonstrates the preparation of Cr-terephthalate Metal-Organic Frameworks (Cr-BDC MOFs) by combining metal salt and organic linker extracted from tannery effluent and waste plastic bottles. The waste from tanneries was used as the source of Cr(III), while terephthalic acid was obtained from the alkaline hydrolysis of plastic bottles. Appropriate extraction and assembly processes led to the functional Cr-BDC MOFs, MIL-101(Cr) and MIL-53(Cr). The prepared MOFs showed similar properties (surface area, hydrolytic and thermal stability, and water adsorption performance) to similar MOFs synthesized from pure commercial-grade precursors, as confirmed by N2 sorption, XRD, TGA, and water adsorption experiments. The advancements made in this study represent significant progress in overcoming the bottleneck of MOF production cost efficiency via applying sustainability principles and pave the way for easy scaling-up and maturation of MOF-based processes, for air dehumidification and water harvesting as a case study.
RÉSUMÉ
Energy-efficient approaches to propylene/propane separation such as molecular sieving are of considerable importance for the petrochemical industry. The metal organic framework NbOFFIVE-1-Ni adsorbs propylene but not propane at room temperature and atmospheric pressure, whereas the isostructural SIFSIX-3-Ni does not exclude propane under the same conditions. The static dimensions of the pore openings of both materials are too small to admit either guest, signalling the importance of host dynamics for guest entrance to and transport through the channels. We use ab initio calculations together with crystallographic and adsorption data to show that the dynamics of the two framework-forming units, polyatomic anions and pyrazines, govern both diffusion and separation. The guest diffusion occurs by opening of the flexible window formed by four pyrazines. In NbOFFIVE-1-Ni, (NbOF5)2- anion reorientation locates propane away from the window, which enhances propylene/propane separation.
RÉSUMÉ
Minimal edge-transitive nets are regarded as suitable blueprints for the successful practice of reticular chemistry, and par excellence ideal for the deliberate design and rational construction of highly coordinated metal-organic frameworks (MOFs). We report the systematic generation of the highly connected minimal edge-transitive related nets (transitivity [32]) from parent edge-transitive nets (transitivity [21] or [11]), and their use as a guide for the deliberate design and directional assembly of highly coordinated MOFs from their associated net-coded building units (net-cBUs), 12-connected (12-c) double six-membered ring (d6R) building units. Notably, the generated related nets enclose the distinctive highly coordinated d6R (12-c) due to the subsequent coordination number increase in one node of the resultant new related net; that is, the (3,4,12)-c kce net is the (4,6)-c soc-related net, and the (3,6,12)-c kex and urx nets are the (6,6)-c nia-related nets. Intuitively, the combination of 12-connected hexagonal prismatic rare-earth (RE) nonanuclear [RE9(µ3-O)2(µ3-OH)12(O2C-)12] carboxylate-based clusters with purposely chosen organic or organic-inorganic hybrid building units led to the formation of the targeted highly coordinated MOFs based on selected minimal edge-transitive related nets. Interestingly, the kex-MOFs can alternatively be regarded as a zeolite-like MOF (ZMOF) based on the zeolite underlying topology afx, by considering the dodecacarboxylate ligand as a d6R building unit, delineating a new avenue toward the construction of ZMOFs through the composite building units as net-cBUs. This represents a significant step toward the effective discovery and design of novel minimal edge-transitive and highly coordinated materials using the d6Rs as net-cBUs.
RÉSUMÉ
Defect engineering of metal-organic frameworks (MOFs) offers promising opportunities for tailoring their properties to specific functions and applications. However, determining the structures of defects in MOFs-either point defects or extended ones-has proved challenging owing to the difficulty of directly probing local structures in these typically fragile crystals. Here we report the real-space observation, with sub-unit-cell resolution, of structural defects in the catalytic MOF UiO-66 using a combination of low-dose transmission electron microscopy and electron crystallography. Ordered 'missing linker' and 'missing cluster' defects were found to coexist. The missing-linker defects, reconstructed three-dimensionally with high precision, were attributed to terminating formate groups. The crystallization of the MOF was found to undergo an Ostwald ripening process, during which the defects also evolve: on prolonged crystallization, only the missing-linker defects remained. These observations were rationalized through density functional theory calculations. Finally, the missing-cluster defects were shown to be more catalytically active than their missing-linker counterparts for the isomerization of glucose to fructose.
RÉSUMÉ
Membrane-based separation is poised to reduce the operation cost of propylene/propane separation; however, identifying a suitable molecular sieve for membrane development is still an ongoing challenge. Here, the successful identification and use of a metal-organic framework (MOF) material as fillers, namely, the Zr-fum-fcu-MOF possessing an optimal contracted triangular pore-aperture driving the efficient diffusive separation of propylene from propane in mixed-matrix membranes are reported. It is demonstrated that the fabricated hybrid membranes display a high propylene/propane separation performance, far beyond the current trade-off limit of polymer membranes with excellent properties under industrial conditions. Most importantly, the mechanism behind the exceptional high propylene/propane selectivity is delineated by exploring theoretically the efficiency of sieving of different conformers of propane through the hypothesized triangular rigid pore-aperture of Zr-fum-fcu-MOF.
RÉSUMÉ
Conventional materials for gas/vapor sensing are limited to a single probe detection ability for specific analytes. However, materials capable of concurrent detection of two different probes in their respective harmful levels and using two types of sensing modes have yet to be explored. In particular, the concurrent detection of uncomfortable humidity levels and CO2 concentration (400-5000 ppm) in confined spaces is of extreme importance in a great variety of fields, such as submarine technology, aerospace, mining, and rescue operations. Herein, we report the deliberate construction and performance assessment of extremely sensitive sensors using an interdigitated electrode (IDE)-based capacitor and a quartz crystal microbalance (QCM) as transducing substrates. The unveiled sensors are able to simultaneously detect CO2 within the 400-5000 ppm range and relative humidity levels below 40 and above 60%, using two fluorinated metal-organic frameworks, namely, NbOFFIVE-1-Ni and AlFFIVE-1-Ni, fabricated as a thin film. Their subtle difference in a structure-adsorption relationship for H2O and CO2 was analyzed to unveil the corresponding structure-sensing property relationships using both QCM- and IDE-based sensing modes.
RÉSUMÉ
The discovery of appropriate synthetic reaction conditions for fabricating a stable zirconium-based molecular sieve (Zr-fum-fcu-MOF) with minimal defects and its utilization in the challenging separation of linear paraffins from branched paraffins is reported. The crystallinity and structural defects were modulated and adjusted at the molecular level by controlling the synthetic reaction conditions (i.e., amounts of modulators and ligands). The impact of molecular defects on the separation of n-butane from iso-butane was studied through the preparation, fine characterization, and performance evaluation of Zr-fum-fcu-MOFs with varying degrees of defects. Defect-rich Zr-fum-fcu-MOFs were found to have poor n-butane/iso-butane separation, mainly driven by thermodynamics, while Zr-fum-fcu-MOFs with fewer or minimal defects showed efficient separation, driven mainly by kinetics and full molecular exclusion mechanisms. The impact of intrinsic defects (i.e., missing organic or inorganic blocks) on the associated mechanisms involved in the separation of n-butane/iso-butane was evidenced through single-gas adsorption, mixed-gas column breakthrough experiments, and calorimetric studies. This investigation demonstrates, for the first time, the importance of controlling intrinsic defects to maintain the selective exclusion behavior of hydrocarbon isomers when using molecular sieves.
RÉSUMÉ
Here we introduce for the first time a metal-free trianglamine-based supramolecular organic framework, T-SOF-1, with permanent intrinsic porosity and high affinity to CO2. The capability of tuning the pore aperture dimensions is also demonstrated by molecular guest encapsulation to afford excellent CO2/CH4 separation for natural gas upgrading.
RÉSUMÉ
A hydrolytically stable metal-organic framework (MOF) material, named KAUST-7', was derived from a structural phase change of KAUST-7 upon exposure to conditions akin to protonic conduction (363 K/95% relative humidity). KAUST 7' exhibited a superprotonic conductivity as evidenced by the impedance spectroscopic measurement revealing an exceptional conductivity up to 2.0 × 10-2 S cm-1 at 363 K and under 95% RH, a performance maintained over 7 days. Ab initio molecular dynamics simulations suggested that the water-mediated proton transport mechanism is governed by water assisted reorganization of the H-bond network involving the fluorine moieties in KAUST-7' and the guest water molecules. The notable level of performances combined with a very good hydrolytic stability positions KAUST-7' as a prospective proton-exchange membrane alternative to the commercial benchmark Nafion. Furthermore, the remarkable RH sensitivity of KAUST-7' conductivity, substantially higher than previously reported MOFs, offers great opportunities for deployment as a humidity sensor.
RÉSUMÉ
Membrane-based gas separations are energy efficient processes; however, major challenges remain to develop high-performance membranes enabling the replacement of conventional separation processes. Herein, a new fluorinated MOF-based mixed-matrix membrane is reported, which is formed by incorporating the MOF crystals into selected polymers via a facile mixed-matrix approach. By finely controlling the molecular transport in the channels through the MOF apertures tuned by metal pillars and at the MOF-polymer interfaces, the resulting fluorinated MOF-based membranes exhibit excellent molecular sieving properties. These materials significantly outperform state-of-the-art membranes for simultaneous removal of H2 S and CO2 from natural gas-a challenging and economically important application. The robust fluorinated MOFs (NbOFFIVE-1-Ni, AlFFIVE-1-Ni), pave a way to efficient membrane separation processes that require precise discrimination of closely sized molecules.
RÉSUMÉ
Separation of paraffin isomers is of great importance in the refining industry because of their potential applications for energy efficiency, as reflected by their associated Research Octane Number (RON) values. Here, we report the synthesis of the first zeolite-like metal-organic framework (ZMOF) with ana topology that displays helicoidally/cylindrically-shaped channels with a pore-aperture size of ca. 3.8 × 6.2 Å. Markedly, such structural features offer potential for the selective separation of linear, and mono- and dibranched paraffins. Largely due to its tuned pore size and the presence of ions in the channels, ana-ZMOF possesses an excellent uniform charge density that allows the kinetic separation of n-pentane versus iso-pentane and n-butane vs. iso-butane, as well as the molecular exclusion of 2,2,4-trimethyl pentane.
RÉSUMÉ
Correction for 'Topology meets MOF chemistry for pore-aperture fine tuning: ftw-MOF platform for energy-efficient separations via adsorption kinetics or molecular sieving' by Dong-Xu Xue et al., Chem. Commun., 2018, DOI: 10.1039/c8cc03841d.
RÉSUMÉ
Rational design and construction of metal-organic frameworks (MOFs) with intricate structural complexity are of prime importance in reticular chemistry. We report our latest addition to the design toolbox in reticular chemistry, namely the concept of merged nets based on merging two edge-transitive nets into a minimal edge-transitive net for the rational construction of intricate mixed-linker MOFs. In essence, a valuable net for design enclosing two edges (not related by symmetry) is rationally generated by merging two edge-transitive nets, namely (3,6)-coordinated spn and 6-coordinated hxg. The resultant merged-net, a (3,6,12)-coordinated sph net with net transitivity [32] enclosing three nodes and two distinct edges, offers potential for deliberate design of intricate mixed-linker MOFs. We report implementation of the merged-net approach for the construction of isoreticular rare-earth mixed-linker MOFs, sph-MOF-1 to -4, based on the assembly of 12-c hexanuclear carboxylate-based molecular building blocks (MBBs), displaying cuboctahedral building units, 3-c tritopic ligands, and 6-c hexatopic ligands. The resultant sph-MOFs represent the first examples of MOFs where the underlying net is merged from two 3-periodic edge-transitive nets, spn and hxg. Distinctively, the sph-MOF-3 represents the first example of a mixed-linker MOF to enclose both trigonal and hexagonal linkers. The merged-nets approach allows the logical practice of isoreticular chemistry by taking into account the mathematically correlated dimensions of the two ligands to afford the deliberate construction of a mixed-linker mesoporous MOF, sph-MOF-4. The merged-net equation and two key parameters, ratio constant and MBB constant, are disclosed. A merged-net strategy for the design of mixed-linker MOFs by strictly controlling the size ratio between edges is introduced.
RÉSUMÉ
Herein we demonstrate how the combined use of the molecular building block (MBB) approach and reticular chemistry allows the fabrication of a highly stable, ultra-microporous metal-organic framework (MOF) that is an efficient sorbent for the challenging separation of propane/propylene.
RÉSUMÉ
The development of practical solutions for the energy-efficient capture of carbon dioxide is of prime importance and continues to attract intensive research interest. Conceivably, the implementation of adsorption-based processes using different cycling modes, e.g., pressure-swing adsorption or temperature-swing adsorption, offers great prospects to address this challenge. Practically, the successful deployment of practical adsorption-based technologies depends on the development of made-to-order adsorbents expressing mutually two compulsory requisites: i) high selectivity/affinity for CO2 and ii) excellent chemical stability in the presence of impurities. This study presents a new comprehensive experimental protocol apposite for assessing the prospects of a given physical adsorbent for carbon capture under flue gas stream conditions. The protocol permits: i) the baseline performance of commercial adsorbents such as zeolite 13X, activated carbon versus liquid amine scrubbing to be ascertained, and ii) a standardized evaluation of the best reported metal-organic framework (MOF) materials for carbon dioxide capture from flue gas to be undertaken. This extensive study corroborates the exceptional CO2 capture performance of the recently isolated second-generation fluorinated MOF material, NbOFFIVE-1-Ni, concomitant with an impressive chemical stability and a low energy for regeneration. Essentially, the NbOFFIVE-1-Ni adsorbent presents the best compromise by satisfying all the required metrics for efficient CO2 scrubbing.
RÉSUMÉ
Conventional adsorbents, namely zeolites and silica gel, are often used to control humidity by adsorbing water; however, adsorbents capable of the dual functionality of humidification and dehumidification, offering the desired control of the moisture level at room temperature, have yet to be explored. Here we report Y-shp-MOF-5, a hybrid microporous highly connected rare-earth-based metal-organic framework (MOF), with dual functionality for moisture control within the recommended range of relative humidity (45%-65% RH) set by the American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE). Y-shp-MOF-5 exhibits exceptional structural integrity, robustness, and unique humidity-control performance, as confirmed by the large number (thousand) of conducted water vapor adsorption-desorption cycles. The retained structural integrity and the mechanism of water sorption were corroborated using in situ single-crystal X-ray diffraction (SCXRD) studies. The resultant working water uptake of 0.45 g·g-1 is solely regulated by a simple adjustment of the relative humidity, positioning this hydrolytically stable MOF as a prospective adsorbent for humidity control in confined spaces, such as space shuttles, aircraft cabins, and air-conditioned buildings.
RÉSUMÉ
The separation of related molecules with similar physical/chemical properties is of prime industrial importance and practically entails a substantial energy penalty, typically necessitating the operation of energy-demanding low temperature fractional distillation techniques. Certainly research efforts, in academia and industry alike, are ongoing with the main aim to develop advanced functional porous materials to be adopted as adsorbents for the effective and energy-efficient separation of various important commodities. Of special interest is the subclass of metal-organic frameworks (MOFs) with pore aperture sizes below 5-7 Å, namely ultra-microporous MOFs, which in contrast to conventional zeolites and activated carbons show great prospects for addressing key challenges in separations pertaining to energy and environmental sustainability, specifically materials for carbon capture and separation of olefin/paraffin, acetylene/ethylene, linear/branched alkanes, xenon/krypton, etc. In this tutorial review we discuss the latest developments in ultra-microporous MOF adsorbents and their use as separating agents via thermodynamics and/or kinetics and molecular sieving. Appreciably, we provide insights into the distinct microscopic mechanisms governing the resultant separation performances, and suggest a plausible correlation between the inherent structural features/topology of MOFs and the associated gas/vapour separation performance.
RÉSUMÉ
Natural gas must be dehydrated before it can be transported and used, but conventional drying agents such as activated alumina or inorganic molecular sieves require an energy-intensive desiccant-regeneration step. We report a hydrolytically stable fluorinated metal-organic framework, AlFFIVE-1-Ni (KAUST-8), with a periodic array of open metal coordination sites and fluorine moieties within the contracted square-shaped one-dimensional channel. This material selectively removed water vapor from gas streams containing CO2, N2, CH4, and higher hydrocarbons typical of natural gas, as well as selectively removed both H2O and CO2 in N2-containing streams. The complete desorption of the adsorbed water molecules contained by the AlFFIVE-1-Ni sorbent requires relatively moderate temperature (~105°C) and about half the energy input for commonly used desiccants.
RÉSUMÉ
Highly connected and edge-transitive nets are of prime importance in crystal chemistry and are regarded as ideal blueprints for the rational design and construction of metal-organic frameworks (MOFs). We report the design and synthesis of highly connected MOFs based on reticulation of the sole two edge-transitive nets with a vertex figure as double six-membered-ring (d6R) building unit, namely the (4,12)-coordinated shp net (square and hexagonal-prism) and the (6,12)-coordinated alb net (aluminum diboride, hexagonal-prism and trigonal-prism). Decidedly, the combination of our recently isolated 12-connected (12-c) rare-earth (RE) nonanuclear [RE9(µ3-OH)12(µ3-O)2(O2C-)12] carboxylate-based cluster, points of extension matching the 12 vertices of hexagonal-prism d6R, with 4-connected (4-c) square porphyrinic tetracarboxylate ligand led to the formation of the targeted RE-shp-MOF. This is the first time that RE-MOFs based on 12-c molecular building blocks (MBBs), d6R building units, have been deliberately targeted and successfully isolated, paving the way for the long-awaited (6,12)-c MOF with alb topology. Indeed, combination of a custom-designed hexacarboxylate ligand with RE salts led to the formation of the first related alb-MOF, RE-alb-MOF. Intuitively, we successfully transplanted the alb topology to another chemical system and constructed the first indium-based alb-MOF, In-alb-MOF, by employing trinuclear [In3(µ3-O)(O2C-)6] as the requisite 6-connected trigonal-prism and purposely made a dodecacarboxylate ligand as a compatible 12-c MBB. Prominently, the dodecacarboxylate ligand was employed to transplant shp topology into copper-based MOFs by employing the copper paddlewheel [Cu2(O2C-)4] as the complementary square building unit, affording the first Cu-shp-MOF. We revealed that highly connected edge-transitive nets such shp and alb are ideal for topological transplantation and deliberate construction of related MOFs based on minimal edge-transitive nets.
RÉSUMÉ
Engineering the surface ligands of metal nanoparticles is critical in designing unique arrangements of metal atoms. Here, we report the synthesis and total structure determination of a large box-shaped Ag67 nanocluster (NC) protected by a mixed shell of thiolate (2,4-dimethylbenzenethiolate, SPhMe2) and phosphine (triphenylphosphine, PPh3) ligands. Single crystal X-ray diffraction (SCXRD) and electrospray ionization mass spectrometry (ESI-MS) revealed the cluster formula to be [Ag67(SPhMe2)32(PPh3)8]3+. The crystal structure shows an Ag23 metal core covered by a layer of Ag44S32P8 arranged in the shape of a box. The Ag23 core was formed through an unprecedented centered cuboctahedron, i.e., Ag13, unlike the common centered Ag13 icosahedron geometry. Two types of ligand motifs, eight AgS3P and eight bridging thiols, were found to stabilize the whole cluster. The optical spectrum of this NC displayed highly structured multiple absorption peaks. The electronic structure and optical spectrum of Ag67 were computed using time-dependent density functional theory (TDDFT) for both the full cluster [Ag67(SPhMe2)32(PPh3)8]3+ and a reduced model [Ag67(SH)32(PH3)8]3+. The lowest metal-to-metal transitions in the range 500-800 nm could be explained by considering the reduced model that shows almost identical electronic states to 32 free electrons in a jellium box. The successful synthesis of the large box-shaped Ag67 NC facilitated by the combined use of phosphine and thiol paves the way for synthesizing other metal clusters with unprecedented shapes by judicious choice of thiols and phosphines.