RÉSUMÉ
Internet of Things (IoT) makes connectivity between physical devices which are embedded with sensors, software, and connectivity that let them to communicate and transfer data. This technology makes it possible to collect and transfer data from a vast network device, opening the door to the development of automatic and more efficiency systems. The term "waste management" refers to all of the responsibilities essential to regulate trash, from the point of gathering through reusing and monitoring. Reducing the hazardous consequences of such garbage on the environment and human health is the goal of waste management. By considering these hazardous consequences, this research work is interested in working on an efficient waste management system. The utilization of IoT devices enables municipalities to optimize waste management operations by leveraging data insights. This information aids in scheduling waste collections more effectively and planning optimal routes. Therefore, the research work proposes an IoT-based waste management system with two vital processes such as IoT routing and waste management. At first, routing in IoT is done by proposing hybrid optimization algorithm named Snake Optimization Updated Beluga Whale Optimization algorithm (SOUBWO) under constraints such as distance, energy, link quality, delay, and trust. Secondly, waste management is worked on by following steps including pre-processing, segmentation, feature extraction, and classification. The waste images collected by IoT devices are transmitted from source node (SN) to destination node (DN) by optimal routing. Those transmitted waste images are pre-processed by Wiener filtering process. Consequently, the pre-processed images are segmented by employing proposed Balanced Iterative Reducing and Clustering Using Hierarchies-Altered Distance Metrics (BIRCH-ADM) algorithm. Subsequently, features such as multi-text on histogram feature, proposed Local Gabor XOR Pattern (LGXP)-based feature using novel image processing techniques, and statistical features are extracted. Finally, these extracted features are efficiently classified by hybrid classification model which is formed by integrating conventional deep maxout and Bidirectional-Long Short Term Memory (Bi-LSTM) networks. The effectiveness of the proposed approach is validated through various analyses, including performance and statistical analyses. Moreover, the proposed scheme demonstrates minimal energy consumption, with a recorded value of 0.123. In contrast, conventional methodologies exhibit higher energy consumption, with values such as SOA = 0.237, BWO = 0.146, BES = 0.183, SMO = 0.158, CHOA = 0.174, and PSO = 0.189, respectively. By this hybrid classification model, the process of classification on waste is effectively done and moreover its effectiveness is proved by various analyses.
RÉSUMÉ
The proliferation of emerging pollutants (EPs), encompassing a range of substances such as phthalates, phenolics, pharmaceuticals, pesticides, personal care products, surfactants, and disinfection agents, has become a significant global concern due to their potential risks to the environment and human well-being. Over the past two decades, numerous research studies have investigated the presence of EPs in wastewater and aquatic ecosystems, with the United States Environmental Protection Agency (USEPA) categorizing these newly introduced chemical compounds as emerging contaminants due to their poorly understood impact. EPs have been linked to adverse health effects in humans, including genotoxic and cytotoxic effects, as well as conditions such as obesity, diabetes, cardiovascular disease, and reproductive abnormalities, often associated with their estrogenic action. Microalgae have shown promise in the detoxification of both inorganic and organic contaminants, and several large-scale microalgal systems for wastewater treatment have been developed. However, the progress of algal bioremediation can be influenced by accidental contaminations and operational challenges encountered in pilot-scale research. Microalgae employ various processes, such as bioadsorption, biouptake, and biodegradation, to effectively remediate EPs. During microalgal biodegradation, complex chemical compounds are transformed into simpler substances through catalytic metabolic degradation. Integrating algal bioremediation with existing treatment methodologies offers a viable approach for efficiently eliminating EPs from wastewater. This review focuses on the use of algal-based biological remediation processes for wastewater treatment, the environmental impacts of EPs, and the challenges associated with implementing algal bioremediation systems to effectively remove emerging pollutants.
Sujet(s)
Polluants environnementaux , Microalgues , Polluants chimiques de l'eau , Humains , Polluants environnementaux/métabolisme , Eaux usées , Écosystème , Eau/métabolisme , Polluants chimiques de l'eau/composition chimique , Dépollution biologique de l'environnement , Microalgues/métabolismeRÉSUMÉ
Improper use of conventional fertilizers has been linked to adverse effects on soil nutrient levels. To mitigate the negative impact of surface feeding fertilizers and reduce environmental pollution, a new type of seed coating material has been developed to provide nutrients in close proximity to the growing seed. In this study, a biodegradable seed coating film encapsulating micronutrients was fabricated by incorporating montmorillonite into a starch matrix using the melt processing technique. The dispersion of montmorillonite within the starch matrix was examined using X-ray diffraction (XRD), infrared spectroscopy (IR), and thermal gravimetric analysis (TGA). The results revealed polar interactions among starch, silicate layers, and the hydrogel. The XRD analysis demonstrated a shift in the diffraction peak (001) of the Zinc/montmorillonite/starch/glycerol nanocomposite film from 6.2° to 4.9°, indicating the successful intercalation of Zinc, starch, and glycerol. Furthermore, the inclusion of nanoclay improved the thermal stability of the resulting polymer composite and enhanced its ion exchange capacity, water retention, and micronutrient retention. The time-dependent release of zinc micronutrient from the montmorillonite/starch/glycerol composite film was investigated in Zn-deficient soil extract over a 20-day period. The composite film demonstrated extended release behavior of Zn2+. Subsequently, rice seeds were coated with the zinc-containing composite film using a dip-coating method, and their performance in Zn-deficient soil was evaluated. The results indicated that zinc-coated seeds exhibited improved germination percentage, vegetative growth, and yield compared to uncoated seeds.
Sujet(s)
Oryza , Amidon , Amidon/composition chimique , Zinc , Hydrogels , Bentonite/composition chimique , Engrais , Glycérol , Préparations à action retardée , Micronutriments , Graines , Sol/composition chimiqueRÉSUMÉ
Microplastics (MPs) have become a prevalent environmental concern, exerting detrimental effects on marine and terrestrial ecosystems, as well as human health. Addressing this urgent issue necessitates the implementation of coordinated waste management policies and strategies. In this study, we present a comprehensive review focusing on key results and the underlying mechanisms associated with microplastics. We examine their sources and pathways, elucidate their ecological and human health impacts, and evaluate the current state of waste management policies. By drawing upon recent research and pertinent case studies, we propose a range of practical solutions, encompassing enhanced recycling and waste reduction measures, product redesign, and innovative technological interventions. Moreover, we emphasize the imperative for collaboration and cooperation across sectors and jurisdictions to effectively tackle this pressing environmental challenge. The findings of this study contribute to the broader understanding of microplastics and provide valuable insights for policymakers, researchers, and stakeholders alike.
Sujet(s)
Gestion des déchets , Polluants chimiques de l'eau , Humains , Microplastiques , Matières plastiques , Surveillance de l'environnement , Écosystème , Polluants chimiques de l'eau/analyseRÉSUMÉ
The most significant and renewable class of polymeric materials are extracellular exopolysaccharides (EPSs) produced by microorganisms. Because of their diverse chemical and structural makeup, EPSs play a variety of functions in a variety of industries, including the agricultural industry, dairy industry, biofilms, cosmetics, and others, demonstrating their biotechnological significance. EPSs are typically utilized in high-value applications, and current research has focused heavily on them because of their biocompatibility, biodegradability, and compatibility with both people and the environment. Due to their high production costs, only a few microbial EPSs have been commercially successful. The emergence of financial barriers and the growing significance of microbial EPSs in industrial and medical biotechnology has increased interest in exopolysaccharides. Since exopolysaccharides can be altered in a variety of ways, their use is expected to increase across a wide range of industries in the coming years. This review introduces some significant EPSs and their composites while concentrating on their biomedical uses.
RÉSUMÉ
The prevalence of organic solid waste worldwide has turned into a problem that requires comprehensive treatment on all fronts. The amount of agricultural waste generated by agro-based industries has more than triplet. It not only pollutes the environment but also wastes a lot of beneficial biomass resources. These wastes may be utilized as a different option/source for the manufacturing of many goods, including biogas, biofertilizers, biofuel, mushrooms and tempeh as the primary ingredients in numerous industries. Utilizing agro-industrial wastes as good raw materials may provide cost reduction and lower environmental pollution levels. Agro-industrial wastes are converted into biofuels, enzymes, vitamin supplements, antioxidants, livestock feed, antibiotics, biofertilizers and other compounds via solid-state fermentation (SSF). By definition, SSF is a method used when there is little to no free water available. As a result, it permits the use of solid materials as biotransformation substrates. Through SSF methods, a variety of microorganisms are employed to produce these worthwhile things. SSFs are therefore reviewed and discussed along with their impact on the production of value-added items. This review will provide thorough essential details information on recycling and the use of agricultural waste.
Sujet(s)
Agriculture , Déchets industriels , Fermentation , Déchets industriels/analyse , Déchets solides , BiocarburantsRÉSUMÉ
Grid-based approaches render an efficient framework for data clustering in the presence of incomplete, inexplicit, and uncertain data. This paper proposes an entropy-based grid approach (EGO) for outlier detection in clustered data. The given hard clusters obtained from a hard clustering algorithm, EGO uses entropy on the dataset as a whole or on an individual cluster to detect outliers. EGO works in two steps: explicit outlier detection and implicit outlier detection. Explicit outlier detection is concerned with those data points that are isolated in the grid cells. They are either far from the dense region or maybe a nearby isolated data point and therefore declared as an explicit outlier. Implicit outlier detection is associated with the detection of outliers that are perplexedly deviated from the normal pattern. The determination of such outliers is achieved using entropy change of the dataset or a specific cluster for each deviation. The elbow based on the trade-off between entropy and object geometries optimizes the outlier detection process. Experimental results on CHAMELEON datasets and other similar datasets suggested that the proposed approach(es) detect the outliers more precisely and extend the capability of outliers detection to an additional 4.5% to 8.6%. Moreover, the resultant clusters became more precise and compact when the entropy-based gridding approach is applied on top of hard clustering algorithms. The performance of the proposed algorithms is compared with well-known outlier detection algorithms, including DBSCAN, HDBSCAN, RE3WC, LOF, LoOP, ABOD, CBLOF and HBOS. Finally, a case study for detecting outliers in environmental data has been carried out using the proposed approach and results are generated on our synthetically prepared datasets. The performance shows that the proposed approach may be an industrial-oriented solution to outlier detection in environmental monitoring data.
Sujet(s)
Algorithmes , Entropie , Analyse de regroupementsRÉSUMÉ
This study focuses on the extraction and dyeing properties of natural fabric dyes derived from brown seaweeds, namely Padina tetrastromatica, Sargassum tenerrimum, and Turbinaria ornata. Various solvents (acetone, ethanol, methanol, and water) and mordants (CH3 COOH, FeSO4, and NaHCO3) were used to extract the dyes and achieve different shades with excellent fastness properties. Phytochemical and FTIR analyses were performed to identify the phytochemicals responsible for dyeing. The dyed cotton fabrics exhibited a range of colors based on the mordants and solvents used. Fastness assessments revealed that aqueous and ethanol dye extracts exhibited superior properties compared to acetone and methanol extracts. The influence of mordants on cotton fibers' fastness properties was also evaluated. In addition to the above findings, this study makes a significant contribution to the field by exploring the bioactive potential of natural fabric dyes derived from brown seaweeds. The utilization of these abundant and low-cost seaweed sources for dye extraction provides a sustainable alternative to synthetic dyes, addressing environmental concerns associated with the textile industry. Furthermore, the comprehensive analysis of different solvents and mordants in obtaining various shades and excellent fastness properties enhances our understanding of the dyeing process and opens avenues for further research in the development of eco-friendly textile dyes.
Sujet(s)
Agents colorants , Algue marine , Agents colorants/composition chimique , Acétone , Méthanol , Textiles/analyse , Solvants , ÉthanolRÉSUMÉ
Environmental pollution by diverse organic pollutants is a serious issue facing humanity, and the scientific community is working hard to find a solution to climatic change due to pollution. Along the same lines, we have tried to find a material/method which is economical and less laborious for achieving the same desired objectives. In this work, the surface modification of titanium dioxide to be used as a photocatalyst was carried out with different concentrations of alkyl silane agent APTES (3-aminopropyltriethoxysilane) and studied their impact on the degradation of representative compound, i.e., methylene blue. The surface-modified TiO2-APTES nanoparticles were obtained via the solvothermal process. The APTES in different molar (0.21-0.41 M) concentrations was obtained by dissolving APTES in ethanol. The obtained samples were characterized through Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), scanning electron microscopy, and UV-visible spectroscopy. The photocatalytic activity was inferred from the degradation ability of functionalized nanoparticles for methylene blue and evaluated by UV-visible spectroscopy. Our results demonstrated a significant 70% degradation rate of methylene blue.
Sujet(s)
Assainissement et restauration de l'environnement , Bleu de méthylène , Bleu de méthylène/composition chimique , Silanes , Surveillance de l'environnement , Titane/composition chimique , Composés chimiques organiques , CatalyseRÉSUMÉ
There are several environmental and human health impacts if human hair waste is not adequately disposed of. In this study, pyrolysis of discarded human hair was carried out. This research focused on the pyrolysis of discarded human hair under controlled environmental conditions. The effects of the mass of discarded human hair and temperature on bio-oil yield were studied. The proximate and ultimate analyses and calorific values of disposed of human hair, bio-oil, and biochar were determined. Further, chemical compounds of bio-oil were analyzed using a gas chromatograph and a mass spectrometer. Finally, the kinetic modeling and behavior of the pyrolysis process were characterized through FT-IR spectroscopy and thermal analysis. Based on the optimized mass of disposed of human hair, 250 g had a better bio-oil yield of 97% in the temperature range of 210-300 °C. The different parameters of bio-oil were: pH (2.87), specific gravity (1.17), moisture content (19%), heating value (19.34 MJ/kg), and viscosity (50 CP). C (56.4%), H (6.1%), N (0.16%), S (0.01%), O (38.4%), and Ash (0.1%) were discovered to be the elemental chemical composition of bio-oil (on a dry basis). During breakdown, the release of different compounds like hydrocarbons, aldehydes, ketones, acids, and alcohols takes place. According to the GC-MS results, several amino acids were discovered in the bio-oil, 12 abundant in the discarded human hair. The FTIR and thermal analysis found different concluding temperatures and wave numbers for functional groups. Two main stages are partially separated at about 305 °C, with maximum degradation rates at about 293 oC and 400-4140 °C, respectively. The mass loss was 30% at 293 0C and 82% at temperatures above 293 0C. When the temperature reached 4100C, the entire bio-oil from discarded human hair was distilled or thermally decomposed.
Sujet(s)
Température élevée , Pyrolyse , Humains , Spectroscopie infrarouge à transformée de Fourier , Biocarburants/analyse , Poils/composition chimiqueRÉSUMÉ
The engine tests aimed to produce comparable data for fuel consumption, exhaust emissions, and thermal efficiency. The computational fluid dynamics (CFD) program FLUENT was used to simulate the combustion parameters of a direct injection diesel engine. In-cylinder turbulence is controlled using the RNG k-model. The model's conclusions are validated when the projected p-curve is compared to the observed p-curve. The thermal efficiency of the 50E50B blend (50% ethanol, 50% biofuel) is higher than the other blends as well as diesel. Diesel has lower brake thermal efficiency among the other fuel blends used. The 10E90B mix (10% ethanol, 90% biofuel) has a lower brake-specific fuel consumption (BSFC) than other blends but is slightly higher than diesel. The temperature of the exhaust gas rises for all mixtures as the brake power is increased. CO emissions from 50E50B are lower than diesel at low loads but slightly greater at heavy loads. According to the emission graphs, the 50E50B blend produces less HC than diesel. NOx emission rises with increasing load in the exhaust parameter for all mixes. A 50E50B biofuel-ethanol combination achieves the highest brake thermal efficiency, 33.59%. The BSFC for diesel is 0.254 kg/kW-hr at maximum load, while the BSFC for the 10E90B mix is 0.269 kg/kW-hr, higher than diesel. In comparison to diesel, BSFC has increased by 5.90%.
Sujet(s)
Biocarburants , Essence , Éthanol , Hydrodynamique , Emissions des véhicules , Monoxyde de carbone/analyseRÉSUMÉ
An aerobic microbial fuel cell (MFC) was designed to produce bio-electricity using cow manure-pretreated slurry (CM) and sewage sludge (SS). A comparative study of parametric effects on power generation for various parameters like feed ratio of wastes, pH of anode media, and electrode depth was conducted. This experiment aimed to identify the most important system parameters and optimize them to develop a suitable controller for a stable output. Power production reached its maximum at an electrode depth of 7 cm, a pH of 6, and a feed ratio of 2:1 in the CM + SS system before applying the controller. Response surface methodology (RSM) was practiced to explore the relationships between various parameters and the response using MINITAB software. The regression equation of the most productive system deduced from the RSM result has an R2 value of 85.3%. The results show that an ON/OFF controller works satisfactorily in this study. The highest energy-generating setup has a chemical oxygen demand (COD) removal efficiency of 45%. The morphology and content of the used wastes indicate that they can be recycled in other applications.
Sujet(s)
Sources d'énergie bioélectrique , Eaux d'égout/composition chimique , Électricité , Électrodes , Analyse de la demande biologique en oxygèneRÉSUMÉ
The main objective of the present research work is to utilise the produced bio-oil from microwave pyrolysis of Karanja, a non-edible seed, as fuel for diesel engines by increasing some up-gradation in the quality of the fuel. The emulsification process is carried out to improve the stability of the diesel-bio-oil blend using SPAN 80 and TWEEN 80, which lasted for 28 days without any layer separation termed as EKB20. The addition of 5% DEE and 10% DEE into EKB20 is done to enhance the combustion characteristics of the diesel engine. The produced bio-oil fuels were tested in a Kirloskar make, four-stroke, single-cylinder, direct injection diesel engine of 5.2 kW rated power output. The addition of DEE reduces the peak pressure by 4 bar and increases the heat release rate due to the higher volatility of DEE. At full load conditions, the thermal brake efficiency improved by 9.31% and 14.11%, respectively, compared to EKB20. Adding 5% DEE and 10% DEE at the rated power output reduced the smoke density by 18.42% and 60.25%, respectively, compared to EKB20 and 5% and 4% compared to diesel. The addition of 5% DEE and 10% DEE shows a 39% and 51% increase in NOX concentration and a 90% reduction in CO emission at the maximum brake power output. Hence, it is concluded that the fuels EKB20 + 5% DEE and EKB20 + 10% DEE can be used as alternative fuels for diesel engines.
RÉSUMÉ
The exploitation of lignocellulosic biomass (LB) such as sugar bagasse waste in biorefineries is the most cost-effective and favourable sustainable approach to producing essential platform chemicals, materials, and energy environmentally benignly. Herein, a microwave-mediated deep eutectic solvents (DESs)/dimethyl sulfoxide (DMSO) system for efficiently processing LB waste into platform chemicals was proposed thereof. Under optimized appropriate diverse parameters such as solvent varieties, catalyst dosage, DMSO addition, reaction time and temperature, the proposed catalytic system (i.e., microwave mediated DESs/DMSO system) has demonstrated significant yields of 5-hydroxymethylfurfural (5-HMF), furfural (FF) and levulinic acid (LevA) of 31.29 %, 28.38 % and 35.65 %, respectively. These favourable results were obtained at the reaction temperature of 140 °C for 40 min. The anticipated catalytic system's activation energy (Ea) was found to be 29.11 kJ/mol. Hence, a practical, inexpensive and sustainable process with the potential of high-value platform chemicals, explicitly for a sustainable strategy in a circular bioeconomy was proposed.
Sujet(s)
Diméthylsulfoxyde , Lignine , Biomasse , Glucides , Cellulose , Solvants eutectiques profonds , Furfural , Micro-ondes , Solvants , SucresRÉSUMÉ
The significant issue affecting wastewater treatment is human faeces containing SARS-CoV-2. SARS-CoV-2, as a novel coronavirus, has expanded globally. While the current focus on the COVID-19 epidemic is rightly on preventing direct transmission, the risk of secondary transmission via wastewater should not be overlooked. Many researchers have demonstrated various methods and tools for preventing and declining this virus in wastewater treatment, especially for SARS-CoV-2 in human faeces. This research reports two people tested for 30 d, with written consent, at Mosa-Ebne-Jafar Hospital of Quchan, Iran, from September 1st to October 9th, 2021. The two people's conditions are the same. The Hyssop plant was used, which boosts the immune system's effectiveness and limonene, rosemary, caffeic acids and flavonoids, all biologically active compounds in this plant, cause improved breathing problems, colds, and especially for SARS-CoV-2. As a result, utilising the Hyssop plant can help in reducing SARS-CoV-2 in faeces. This plant's antioxidant properties effectively reduce SARS-CoV-2 in faeces by 30%; nevertheless, depending on the patient's condition. This plant is also beneficial for respiratory and digestive health.
Sujet(s)
COVID-19 , SARS-CoV-2 , COVID-19/prévention et contrôle , Fèces , Humains , Hyssopus , Eaux d'égout , Eaux uséesRÉSUMÉ
Advanced wastewater treatment technologies are effective methods and currently attract growing attention, especially in arid and semi-arid areas, for reusing water, reducing water pollution, and explicitly declining, inactivating, or removing SARS-CoV-2. Overall, removing organic matter and micropollutants prior to wastewater reuse is critical, considering that water reclamation can help provide a crop irrigation system and domestic purified water. Advanced wastewater treatment processes are highly recommended for contaminants such as monovalent ions from an abiotic source and SARS-CoV-2 from an abiotic source. This work introduces the fundamental knowledge of various methods in advanced water treatment, including membranes, filtration, Ultraviolet (UV) irradiation, ozonation, chlorination, advanced oxidation processes, activated carbon (AC), and algae. Following that, an analysis of each process for organic matter removal and mitigation or prevention of SARS-CoV-2 contamination is discussed. Next, a comprehensive overview of recent advances and breakthroughs is provided for each technology. Finally, the advantages and disadvantages of each method are discussed.
RÉSUMÉ
Rice husk is a bulky byproduct with a high silica content from rice milling. In this study, the application of an acid-catalyzed ionic liquid (IL) pretreatment was studied for processing rice husks with a rugged structure. The pretreatment conditions were 130°C for 30 min with 1.2 wt% HCl. The results of enzymatic hydrolysis demonstrated that cellulose conversion of HCl-BMIMCl-treated at 48 h was increased by 660.05%, 538.81%, and 376.55% compared with the untreated, HCl-treated, and BMIMCl-treated rice husks, respectively. Composition analysis demonstrated that most of the hemicellulose was removed in the acid-IL combined treatment. Moreover, scanning electron microscopy, X-ray diffraction (XRD), and Fourier transform infrared analyses indicated that the crystalline structure and outer silica layer of the rice husks were efficiently broken up. The results revealed that the HCl-catalyzed dissolution is highly favorable for the industrial application of rick husks in the production of fermentable sugar and high-purity silica.
Sujet(s)
Liquides ioniques , Oryza , Biomasse , Catalyse , Hydrolyse , Lignine , Silice , SucresRÉSUMÉ
Fine particulate matter with an aerodynamic diameter of <2.5 µm (PM2.5), particularly from the in-use gasoline-fueled vehicles, is a leading air quality pollutant and the chemical composition of PM2.5 is vital to the practical issues of climate change, health effects, and pollution control policies, inter alia. These atmospheric fine particulate matters (PM2.5) emitted from the exhausts of mobile source gasoline-fueled vehicles constitute substantial risks to human health through inhalation, and most importantly, affect urban air quality. Therefore, in order to explicitly determine the inhalation risks of PM2.5 which could potentially contain a significant amount of chemicals and metallic elements (MEs) concentration, we investigated the chemical composition (comprising of carbonaceous species and metallic elements) of PM2.5 emissions from mobile source gasoline-fueled vehicles. To further examine the chemical composition and metallic elements concentration in PM2.5 from the exhausts of mobile source gasoline-fueled vehicles, we systematically investigated PM2.5 emission samples collected from the exhausts of fifteen (15) mobile source gasoline-fueled vehicles. Our study has equally also determined the chemical compositions based on carbonaceous species (organic carbon - OC and elemental carbon - EC). Furthermore, the concentrations of PM2.5 and metallic elements (Ca, Al, Zn, K, Ca, Fe, Mg and Cr) in PM2.5 were analyzed with the help of Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES). The details of the tested gasoline-fueled vehicles cover the model years, consisting of the vehicles registered from 2000 to 2017 from several vehicle manufacturers (or brands) with various running mileages ranging from 123.4 to 575,844 km (average 123,105 km). Our results established that elemental carbon (EC) and organic carbon (OC) were the most significant concentrations of carbonaceous species. The concentration of metallic elements in PM2.5 and chemical characterization were studied by their relationship with atmospheric PM2.5 and the results showed that the metallic elements concentration in PM2.5 were in descending order as follows: Ca > Al > Zn > K > Fe > Mg > Cr. These results will help us to further understand how PM2.5 emissions from the exhausts of in-use gasoline-fueled vehicles contribute to both chemical and atmospheric metallic elements concentration in the ambient air.