RÉSUMÉ
Background: Electrochemical impedance spectroscopy can determine characteristics such as cell density, size, and shape. The development of an electrical impedance-based medical device to estimate acute ischemic stroke (AIS) clot characteristics could improve stroke patient outcomes by informing clinical decision making. Objectives: To assess how well electrical impedance combined with machine learning identified red blood cell (RBC)-rich composition of AIS clots ex vivo, which is associated with a successfully modified first-pass effect. Methods: A total of 253 clots from 231 patients who underwent thrombectomy in 5 hospitals in France, Japan, Serbia, and Spain between February 2021 and October 2023 were analyzed in the Clotbase International Registry. Electrical impedance measurements were taken following clot retrieval by thrombectomy, followed by Martius Scarlet Blue staining. The clot components were quantified via Orbit Image Analysis, and RBC percentages were correlated with the RBC estimations made by the electrical impedance machine learning model. Results: Quantification by Martius Scarlet Blue staining identified RBCs as the major component in clots (RBCs, 37.6%; white blood cells, 5.7%; fibrin, 25.5%; platelets/other, 30.3%; and collagen, 1%). The impedance-based RBC estimation correlated well with the RBC content determined by histology, with a slope of 0.9 and Spearman's correlation of r = 0.7. Clots removed in 1 pass were significantly richer in RBCs and clots with successful recanalization in 1 pass (modified first-pass effect) were richer in RBCs as assessed using histology and impedance signature. Conclusion: Electrical impedance estimations of RBC content in AIS clots are consistent with histologic findings and may have potential for clinically relevant parameters.
RÉSUMÉ
BACKGROUND: Intra-procedural characterization of stroke thromboemboli might guide mechanical thrombectomy (MT) device choice to improve recanalization rates. Electrochemical impedance spectroscopy (EIS) has been used to characterize various biological tissues in real time but has not been used in thrombus. OBJECTIVE: To perform a feasibility study of EIS analysis of thrombi retrieved by MT to evaluate: (1) the ability of EIS and machine learning to predict red blood cell (RBC) percentage content of thrombi and (2) to classify the thrombi as "RBC-rich" or "RBC-poor" based on a range of cutoff values of RBC. METHODS: ClotbasePilot was a multicentric, international, prospective feasibility study. Retrieved thrombi underwent histological analysis to identify proportions of RBC and other components. EIS results were analyzed with machine learning. Linear regression was used to evaluate the correlation between the histology and EIS. Sensitivity and specificity of the model to classify the thrombus as RBC-rich or RBC-poor were also evaluated. RESULTS: Among 514 MT,179 thrombi were included for EIS and histological analysis. The mean composition in RBC of the thrombi was 36% ± 24. Good correlation between the impedance-based prediction and histology was achieved (slope of 0.9, R2 = 0.53, Pearson coefficient = 0.72). Depending on the chosen cutoff, ranging from 20 to 60% of RBC, the calculated sensitivity for classification of thrombi ranged from 77 to 85% and the specificity from 72 to 88%. CONCLUSION: Combination of EIS and machine learning can reliably predict the RBC composition of retrieved ex vivo AIS thrombi and then classify them into groups according to their RBC composition with good sensitivity and specificity.
RÉSUMÉ
BACKGROUND: Intracranial occlusion recanalization fails in 20% of endovascular thrombectomy procedures, and thrombus composition is likely to be an important factor. In this study, we demonstrate that the combination of electrical impedance spectroscopy (EIS) and machine learning constitutes a novel and highly accurate method for the identification of different human thrombus types. METHODS: 134 samples, subdivided into four categories, were analyzed by EIS: 29 'White', 26 'Mixed', 12 'Red' thrombi, and 67 liquid 'Blood' samples. Thrombi were generated in vitro using citrated human blood from five healthy volunteers. Histological analysis was performed to validate the thrombus categorization based on red blood cell content. A machine learning prediction model was trained on impedance data to differentiate blood samples from any type of thrombus and in between the four sample categories. RESULTS: Histological analysis confirmed the similarity between the composition of in vitro generated thrombi and retrieved human thrombi. The prediction model yielded a sensitivity/specificity of 90%/99% for distinguishing blood samples from thrombi and a global accuracy of 88% for differentiating among the four sample categories. CONCLUSIONS: Combining EIS measurements with machine learning provides a highly effective approach for discriminating among different thrombus types and liquid blood. These findings raise the possibility of developing a probe-like device (eg, a neurovascular guidewire) integrating an impedance-based sensor. This sensor, placed in the distal part of the smart device, would allow the characterization of the probed thrombus on contact. The information could help physicians identify optimal thrombectomy strategies to improve outcomes for stroke patients.
Sujet(s)
Accident vasculaire cérébral , Thrombose , Humains , Impédance électrique , Thrombose/anatomopathologie , Thrombectomie/méthodes , Accident vasculaire cérébral/anatomopathologie , Érythrocytes/anatomopathologieRÉSUMÉ
Treatment of acute ischaemic stroke (AIS) focuses on rapid recanalisation of the occluded artery. In recent years, advent of mechanical thrombectomy devices and new procedures have accelerated the analysis of thrombi retrieved during the endovascular thrombectomy procedure. Despite ongoing developments and progress in AIS imaging techniques, it is not yet possible to conclude definitively regarding thrombus characteristics that could advise on the probable efficacy of thrombolysis or thrombectomy in advance of treatment. Intraprocedural devices with dignostic capabilities or new clinical imaging approaches are needed for better treatment of AIS patients. In this review, what is known about the composition of the thrombi that cause strokes and the evidence that thrombus composition has an impact on success of acute stroke treatment has been examined. This review also discusses the evidence that AIS thrombus composition varies with aetiology, questioning if suspected aetiology could be a useful indicator to stroke physicians to help decide the best acute course of treatment. Furthermore, this review discusses the evidence that current widely used radiological imaging tools can predict thrombus composition. Further use of new emerging technologies based on bioimpedance, as imaging modalities for diagnosing AIS and new medical device tools for detecting thrombus composition in situ has been introduced. Whether bioimpedance would be beneficial for gaining new insights into in situ thrombus composition that could guide choice of optimum treatment approach is also reviewed.
Sujet(s)
Encéphalopathie ischémique , Accident vasculaire cérébral ischémique , Accident vasculaire cérébral , Thrombose , Encéphalopathie ischémique/imagerie diagnostique , Encéphalopathie ischémique/thérapie , Impédance électrique , Humains , Accident vasculaire cérébral ischémique/imagerie diagnostique , Accident vasculaire cérébral ischémique/thérapie , Accident vasculaire cérébral/imagerie diagnostique , Accident vasculaire cérébral/étiologie , Accident vasculaire cérébral/thérapieRÉSUMÉ
Drug-eluting stents (DES), which release anti-proliferative drugs into the arterial wall in a controlled manner, have drastically reduced the rate of in-stent restenosis and revolutionized the treatment of atherosclerosis. However, late stent thrombosis remains a safety concern in DES, mainly due to delayed healing of the endothelial wound inflicted during DES implantation. We present a framework to optimize DES design such that restenosis is inhibited without affecting the endothelial healing process. To this end, we have developed a computational model of fluid flow and drug transport in stented arteries and have used this model to establish a metric for quantifying DES performance. The model takes into account the multi-layered structure of the arterial wall and incorporates a reversible binding model to describe drug interaction with the cells of the arterial wall. The model is coupled to a novel optimization algorithm that allows identification of optimal DES designs. We show that optimizing the period of drug release from DES and the initial drug concentration within the coating has a drastic effect on DES performance. Paclitaxel-eluting stents perform optimally by releasing their drug either very rapidly (within a few hours) or very slowly (over periods of several months up to one year) at concentrations considerably lower than current DES. In contrast, sirolimus-eluting stents perform optimally only when drug release is slow. The results offer explanations for recent trends in the development of DES and demonstrate the potential for large improvements in DES design relative to the current state of commercial devices.
Sujet(s)
Systèmes de délivrance de médicaments/méthodes , Endoprothèses à élution de substances , Conception de prothèse/méthodes , Algorithmes , Athérosclérose/métabolisme , Athérosclérose/physiopathologie , Transport biologique , Sténose pathologique/étiologie , Systèmes de délivrance de médicaments/effets indésirables , Endoprothèses à élution de substances/effets indésirables , Endothélium vasculaire/métabolisme , Modèles biologiques , Paclitaxel/administration et posologie , Paclitaxel/métabolisme , Tunique moyenne/métabolisme , Tunique moyenne/physiopathologie , Cicatrisation de plaieRÉSUMÉ
Despite recent data that suggest that the overall performance of drug-eluting stents (DES) is superior to that of bare-metal stents, the long-term safety and efficacy of DES remain controversial. The risk of late stent thrombosis associated with the use of DES has also motivated the development of a new and promising treatment option in recent years, namely drug-coated balloons (DCB). Contrary to DES where the drug of choice is typically sirolimus and its derivatives, DCB use paclitaxel since the use of sirolimus does not appear to lead to satisfactory results. Since both sirolimus and paclitaxel are highly lipophilic drugs with similar transport properties, the reason for the success of paclitaxel but not sirolimus in DCB remains unclear. Computational models of the transport of drugs eluted from DES or DCB within the arterial wall promise to enhance our understanding of the performance of these devices. The present study develops a computational model of the transport of the two drugs paclitaxel and sirolimus eluted from DES in the arterial wall. The model takes into account the multilayered structure of the arterial wall and incorporates a reversible binding model to describe drug interactions with the constituents of the arterial wall. The present results demonstrate that the transport of paclitaxel in the arterial wall is dominated by convection while the transport of sirolimus is dominated by the binding process. These marked differences suggest that drug release kinetics of DES should be tailored to the type of drug used.