Trimethoprim-Based multicomponent solid Systems: Mechanochemical Screening, characterization and antibacterial activity assessment.

In this work, multicomponent trimethoprim-based pharmaceutical solid systems were developed by mechanochemistry, using coformers from the GRAS list and other active pharmaceutical ingredients. The choice of coformers took into account their potential to increase the aqueous solubility/dissolution rate of TMP or its antibacterial activity. All the binary systems were characterized by thermal analysis, powder X-ray diffraction and infrared spectroscopy, and 3 equimolar systems with FTIR pointing to salts, and 4 eutectic mixtures were identified. The intrinsic dissolution rate of TMP in combination with nicotinic acid (a salt) and with paracetamol (eutectic mixture) were 25% and 5% higher than for pure TMP, respectively. For both Gram-positive and -negative strains, the antibacterial activity of TMP with some of the coformers was improved, since the dosage used was lower than the TMP control. A significant increase in antibacterial activity against E. coli was found for the eutectic mixture with curcumin, with the best results being obtained for the eutectic and equimolar mixtures with ciprofloxacin. Combining trimethoprim with coformers offers an interesting alternative to using trimethoprim alone: multicomponent forms with enhanced TMP dissolution rates were identified, as well as combinations showing enhanced antibacterial activity relatively to the pure drug.

Bio-based matrix photocatalysts for photodegradation of antibiotics.

Antibiotics development during the last century permitted unprecedent medical advances. However, it is undeniable that there has been an abuse and misuse of antimicrobials in medicine and cosmetics, food production and food processing, in the last decades. The pay toll for human development and consumism is the emergence of extended antimicrobial resistance and omnipresent contamination of the biosphere. The One Health concept recognizes the interconnection of human, environmental and animal health, being impossible alter one without affecting the others. In this context, antibiotic decontamination from water-sources is of upmost importance, with new and more efficient strategies needed. In this framework, light-driven antibiotic degradation has gained interest in the last few years, strongly relying in semiconductor photocatalysts. To improve the semiconductor properties (i.e., efficiency, recovery, bandgap width, dispersibility, wavelength excitation, etc.), bio-based supporting material as photocatalysts matrices have been thoroughly studied, exploring synergetic effects as operating parameters that could improve the photodegradation of antibiotics. The present work describes some of the most relevant advances of the last 5 years on photodegradation of antibiotics and other antimicrobial molecules. It presents the conjugation of semiconductor photocatalysts to different organic scaffolds (biochar and biopolymers), then to describe hybrid systems based on g-C3N4 and finally addressing the emerging use of organic photocatalysts. These systems were developed for the degradation of several antibiotics and antimicrobials, and tested under different conditions, which are analyzed and thoroughly discussed along the work.

Nanodroplet vaporization with pulsed-laser excitation repeatedly amplifies photoacoustic signals at low vaporization thresholds.

Nanodroplets' explosive vaporization triggered by absorption of laser pulses produces very large volume changes. These volume changes are two orders of magnitude higher than those of thermoelastic expansion generated by equivalent laser pulses, and should generate correspondingly higher photoacoustic waves (PAW). The generation of intense PAWs is desirable in photoacoustic tomography (PAT) to increase sensitivity. The biocompatibility and simplicity of nanodroplets obtained by sonication of perfluoropentane (PFP) in an aqueous solution of bovine serum albumin (BSA) containing a dye make them particularly appealing for use as contrast agents in clinical applications of PAT. Their usefulness depends on stability and reproducible vaporization of nanodroplets (liquid PFP inside) to microbubbles (gaseous PFP inside), and reversible condensation to nanodroplets. This work incorporates porphyrins with fluorinated chains and BSA labelled with fluorescent probes in PFP nanodroplets to investigate the structure and properties of such nanodroplets. Droplets prepared with average diameters in the 400-1000 nm range vaporize when exposed to nanosecond laser pulses with fluences above 3 mJ cm-2 and resist coalescence. The fluorinated chains are likely responsible for the low vaporization threshold, ∼2.5 mJ cm-2, which was obtained from the laser fluence dependence of the photoacoustic wave amplitudes. Only ca. 10% of the droplets incorporate fluorinated porphyrins. Nevertheless, PAWs generated with nanodroplets are ten times higher than those generated by aqueous BSA solutions containing an equivalent amount of porphyrin. Remarkably, successive laser pulses result in similar amplification, indicating that the microbubbles revert back to nanodroplets at a rate faster than the laser repetition rate (10 Hz). PFP nanodroplets are promising contrast agents for PAT and their performance increases with properly designed dyes.

Degradation of Pesticides Using Semiconducting and Tetrapyrrolic Macrocyclic Photocatalysts-A Concise Review.

Exposure to pesticides is inevitable in modern times, and their environmental presence is strongly associated to the development of various malignancies. This challenge has prompted an increased interest in finding more sustainable ways of degrading pesticides. Advanced oxidation processes in particular appear as highly advantageous, due to their ability of selectively removing chemical entities form wastewaters. This review provides a concise introduction to the mechanisms of photochemical advanced oxidation processes with an objective perspective, followed by a succinct literature review on the photodegradation of pesticides utilizing metal oxide-based semiconductors as photosensitizing catalysts. The selection of reports discussed here is based on relevance and impact, which are recognized globally, ensuring rigorous scrutiny. Finally, this literature review explores the use of tetrapyrrolic macrocyclic photosensitizers in pesticide photodegradation, analyzing their benefits and limitations and providing insights into future directions.

Photoantibacterial Poly(vinyl)chloride Films Applying Curcumin Derivatives as Bio-Based Plasticizers and Photosensitizers.

Herein we describe the design of natural curcumin ester and ether derivatives and their application as potential bioplasticizers, to prepare photosensitive phthalate-free PVC-based materials. The preparation of PVC-based films incorporating several loadings of newly synthesized curcumin derivatives along with their standard solid-state characterization is also described. Remarkably, the plasticizing effect of the curcumin derivatives in the PVC material was found to be similar to that observed in previous PVC-phthalate materials. Finally, studies applying these new materials in the photoinactivation of S. aureus planktonic cultures revealed a strong structure/activity correlation, with the photosensitive materials reaching up to 6 log CFU reduction at low irradiation intensities.

Phthalocyanines: An Old Dog Can Still Have New (Photo)Tricks!

Phthalocyanines have enjoyed throughout the years the benefits of being exquisite compounds with many favorable properties arising from the straightforward and diverse possibilities of their structural modulation. Last decades appreciated a steady growth in applications for phthalocyanines, particularly those dependent on their great photophysical properties, now used in several cutting-edge technologies, particularly in photonic applications. Judging by the vivid reports currently provided by many researchers around the world, the spotlight remains assured. This review deals with the use of phthalocyanine molecules in innovative materials in photo-applications. Beyond a comprehensive view on the recent discoveries, a critical review of the most acclaimed/considered reports is the driving force, providing a brief and direct insight on the latest milestones in phthalocyanine photonic-based science.

Photophysical and Antibacterial Properties of Porphyrins Encapsulated inside Acetylated Lignin Nanoparticles.

Lignin has recently attracted the attention of the scientific community, as a suitable raw material for biomedical applications. In this work, acetylated lignin was used to encapsulate five different porphyrins, aiming to preserve their photophysical properties, and for further use as antibacterial treatment. The obtained nanoparticles were physically characterized, through dynamic light scattering size measurement, polydispersity index and zeta potential values. Additionally, the photophysical properties of the nanoparticles, namely UV-vis absorption, fluorescence emission, singlet oxygen production and photobleaching, were compared with those of the free porphyrins. It was found that all the porphyrins were susceptible to encapsulation, with an observed decrease in their fluorescence quantum yield and singlet oxygen production. These nanoparticles were able to exert an effective photodynamic bactericide effect (blue-LED light, 450-460 nm, 15 J/cm2) on Staphylococcus aureus and Escherichia coli. Furthermore, it was achieved a photodynamic bactericidal activity on an encapsulated lipophillic porphyrin, where the free porphyrin failed to diminish the bacterial survival. In this work it was demonstrated that acetylated lignin encapsulation works as a universal, cheap and green material for the delivery of porphyrins, while preserving their photophysical properties.

Porphyrin-Loaded Lignin Nanoparticles Against Bacteria: A Photodynamic Antimicrobial Chemotherapy Application.

The need for alternative strategies to fight bacteria is evident from the emergence of antimicrobial resistance. To that respect, photodynamic antimicrobial chemotherapy steadily rises in bacterial eradication by using light, a photosensitizer and oxygen, which generates reactive oxygen species that may kill bacteria. Herein, we report the encapsulation of 5,10,15,20-tetrakis(4-hydroxyphenyl)-21H,23H-porphyrin into acetylated lignin water-dispersible nanoparticles (THPP@AcLi), with characterization of those systems by standard spectroscopic and microscopic techniques. We observed that THPP@AcLi retained porphyrin's photophysical/photochemical properties, including singlet oxygen generation and fluorescence. Besides, the nanoparticles demonstrated enhanced stability on storage and light bleaching. THPP@AcLi were evaluated as photosensitizers against two Gram-negative bacteria, Escherichia coli and Pseudomonas aeruginosa, and against three Gram-positive bacteria, Staphylococcus aureus, Staphylococcus epidermidis, and Enterococcus faecalis. THPP@AcLi were able to diminish Gram-positive bacterial survival to 0.1% when exposed to low white LED light doses (4.16 J/cm2), requiring concentrations below 5 µM. Nevertheless, the obtained nanoparticles were unable to diminish the survival of Gram-negative bacteria. Through transmission electron microscopy observations, we could demonstrate that nanoparticles did not penetrate inside the bacterial cell, exerting their destructive effect on the bacterial wall; also, a high affinity between acetylated lignin nanoparticles and bacteria was observed, leading to bacterial flocculation. Altogether, these findings allow to establish a photodynamic antimicrobial chemotherapy alternative that can be used effectively against Gram-positive topic infections using the widely available natural polymeric lignin as a drug carrier. Further research, aimed to inhibit the growth and survival of Gram-negative bacteria, is likely to enhance the wideness of acetylated lignin nanoparticle applications.

Photoacoustic generation of intense and broadband ultrasound pulses with functionalized carbon nanotubes.

Carbon nanotubes (CNT) functionalized with siloxane groups were dissolved in polystyrene/tetrahydrofuran to produce thin films that generate broadband and intense ultrasound pulses when excited by pulsed lasers. These films absorb >99% of light in the visible and near-infrared and show no signs of fatigue after thousands of laser pulses. Picosecond laser pulses with fluences of 50 mJ cm-2 generate photoacoustic waves with exceptionally wide bandwidths (170 MHz at -6 dB) and peak pressures >1 MPa several millimeters away from the source. The ability to generate such broadband ultrasound pulses is assigned to the ultrafast dissipation of heat by CNT-siloxanes, and to the formation of very thin photoacoustic sources thanks to the high speed of sound of polystyrene. The wide bandwidths achieved allow for axial resolutions of 8 µm at depths less than 1 mm, similar to the resolution of histology but based on real-time non-invasive methods.

Conjugating biomaterials with photosensitizers: advances and perspectives for photodynamic antimicrobial chemotherapy.

Antimicrobial resistance is threatening to overshadow last century's medical advances. Previously eradicated infectious diseases are now resurgent as multi-drug resistant strains, leading to expensive, toxic and, in some cases, ineffective antimicrobial treatments. Given this outlook, researchers are willing to investigate novel antimicrobial treatments that may be able to deal with antimicrobial resistance, namely photodynamic therapy (PDT). PDT relies on the generation of toxic reactive oxygen species (ROS) in the presence of light and a photosensitizer (PS) molecule. PDT has been known for almost a century, but most of its applications have been directed towards the treatment of cancer and topical diseases. Unlike classical antimicrobial chemotherapy treatments, photodynamic antimicrobial chemotherapy (PACT) has a non-target specific mechanism of action, based on the generation of ROS, working against cellular membranes, walls, proteins, lipids and nucleic acids. This non-specific mechanism diminishes the chances of bacteria developing resistance. However, PSs usually are large molecules, prone to aggregation, diminishing their efficiency. This review will report the development of materials obtained from natural sources, as delivery systems for photosensitizing molecules against microorganisms. The present work emphasizes on the biological results rather than on the synthesis routes to prepare the conjugates. Also, it discusses the current state of the art, providing our perspective on the field.

Photoinactivation of microorganisms with sub-micromolar concentrations of imidazolium metallophthalocyanine salts.

The increasingly limited therapeutic options for the treatment of infections caused by multi-resistant Gram-negative bacteria due to the alarming increase in bacteria resistance, renewed interest in photodynamic inactivation (PDI) of bacteria. We address PDI of multi-resistant bacteria with a new family of cationic tetra-imidazolyl phthalocyanines bearing a diversity of cationizing alkylic chain sizes, degrees of cationization and coordinating metals. The antimicrobial activities of the phthalocyanines under white light against Gram-positive and Gram-negative bacteria have remarkable differences in efficacy. We relate their spectroscopic and photophysical properties with the generation of reactive oxygen species (ROS), biological performance and structural features. We show that sub-micromolar concentrations of a Zn(II) tetra-ethyl cationic phthalocyanine reduce colonies of Gram-negative bacteria (E. coli, P. aeruginosa) and C. albicans by 7 log units while leaving mammalian cells unharmed. This is a new lead to address hard-to-treat localized infections.

A biocompatible redox MRI probe based on a Mn(ii)/Mn(iii) porphyrin.

For the development of redox responsive MRI probes based on the MnIII/MnII couple, stable complexation of both reduced and oxidized forms of the metal ion and appropriate tuning of the redox potential in the biologically relevant range are key elements. The water soluble fluorinated Mn-porphyrin derivative Mn-3 satisfies both requirements. In aqueous solutions, it can reversibly switch between MnIII/MnII oxidation states. In the presence of ascorbic acid or ß-mercaptoethanol, the MnIII form undergoes reduction, which is slowly but fully reversed in the presence of air oxygen. A UV-Vis kinetic study of MnIII/MnII reduction under oxygen-free conditions yielded second-order rate constants, k2, of 46.1 M-1 s-1 and 13.8 M-1 s-1 for the reaction with ascorbic acid and ß-mercaptoethanol, respectively. This could correspond, in the absence of oxygen, to a half-life of a few minutes in blood plasma and a few seconds in circulating immune cells where ascorbic acid reaches 20-40 µM and a few mM concentrations, respectively. In contrast to expectations based on the redox potential, reduction with glutathione or cysteine does not occur. It is prevented by the coordination of the glutathione carboxylate group(s) to MnIII in the axial position, as was evidenced by NMR data. Therefore, MnIII-3 acts as an ascorbate specific turn-on MRI probe, which in turn can be re-oxidized by oxygen. The relaxivity increase from the oxidized to the reduced form is considerably improved at medium frequencies (up to 80 MHz) with respect to the previously studied Mn-TPPS4 analogues; at 20 MHz, it amounts to 150%. No in vitro cytotoxicity is detectable for Mn-3 in the typical MRI concentration range. Finally, 19F NMR resonances of MnIII-3 are relatively sharp which could open further opportunities to exploit such complexes as paramagnetic 19F NMR probes.

Bioinspired-Metalloporphyrin Magnetic Nanocomposite as a Reusable Catalyst for Synthesis of Diastereomeric (-)-Isopulegol Epoxide: Anticancer Activity Against Human Osteosarcoma Cells (MG-63).

In the present study, we developed a green epoxidation approach for the synthesis of the diastereomers of (-)-isopulegol benzyl ether epoxide using molecular oxygen as the oxidant and a hybrid manganese(III)-porphyrin magnetic reusable nanocomposite as the catalyst. High activity, selectivity, and stability were obtained, with up to four recycling cycles without the loss of activity and selectivity for epoxide. The anticancer effect of the newly synthesized isopulegol epoxide diastereomers was evaluated on a human osteosarcoma cell line (MG-63); both diastereomers showed similar in vitro potency. The measured IC50 values were significantly lower than those reported for other monoterpene analogues, rendering these epoxide isomers as promising anti-tumor agents against low prognosis osteosarcoma.

A Cost-Efficient Method for Unsymmetrical Meso-Aryl Porphyrin Synthesis Using NaY Zeolite as an Inorganic Acid Catalyst.

Herein we report the synthesis of unsymmetrical meso-aryl substituted porphyrins, using NaY zeolite as an inorganic acid catalyst. A comparative study between this method and the several synthetic strategies available in the literature was carried out. Our method presented a better, more cost-efficient rationale and displayed a significantly lower environmental impact. Furthermore, it was possible to verify the scalability of the process as well as the reutilization of the inorganic catalyst NaY (up to 6 times) without significant yield decrease. In addition, this method was applied to the synthesis of several other unsymmetrical porphyrins, from a low melting point porphyrin to mono-carboxylated halogenated unsymmetrical porphyrins, in yields higher than those found in the literature. Additionally, for the first time, two acetamide functionalized halogenated porphyrins were prepared in high yields. This methodology opens the way to the preparation of high yielding functionalized porphyrins, which can be easily immobilized for a variety of applications, either in catalysis or in biomedicine.

Nonlinear Optical Materials for the Smart Filtering of Optical Radiation.

The control of luminous radiation has extremely important implications for modern and future technologies as well as in medicine. In this Review, we detail chemical structures and their relevant photophysical features for various groups of materials, including organic dyes such as metalloporphyrins and metallophthalocyanines (and derivatives), other common organic materials, mixed metal complexes and clusters, fullerenes, dendrimeric nanocomposites, polymeric materials (organic and/or inorganic), inorganic semiconductors, and other nanoscopic materials, utilized or potentially useful for the realization of devices able to filter in a smart way an external radiation. The concept of smart is referred to the characteristic of those materials that are capable to filter the radiation in a dynamic way without the need of an ancillary system for the activation of the required transmission change. In particular, this Review gives emphasis to the nonlinear optical properties of photoactive materials for the function of optical power limiting. All known mechanisms of optical limiting have been analyzed and discussed for the different types of materials.

Cost-efficient method for unsymmetrical meso-aryl porphyrins and iron oxide-porphyrin hybrids prepared thereof.

Herein, the synthesis and characterisation of magnetic iron oxide-porphyrin hybrids, constituted of iron-oxide magnetic nanoparticles covalently linked to an unsymmetrically substituted meso-aryl porphyrin, are described. The methodology features for the preparation of the key unsymmetrically substituted meso-aryl porphyrin synthons are discussed, with emphasis on sustainability and in economical terms. The "NaY method" herein reported allows large scale and economical preparation, which are demonstrated by its reusability and at least two-fold yields, when compared with classical porphyrin synthetic methods and also presents a much better cost-efficiency rationale and lower environmental impact. Upon covalent linking to iron-oxide magnetic nanoparticles, the new hybrids are fully characterised by thermogravimetry/differential scanning calorimetry, transmission electron microscopy and infrared spectroscopy and their photophysical properties were measured, which demonstrate that the presence of the magnetic nanoparticle counterparts does not affect these properties, thus allowing the materials to keep the photophysical features imparted by their porphyrin counterparts.

Phthalocyanine Labels for Near-Infrared Fluorescence Imaging of Solid Tumors.

Diamagnetic metal complexes of phthalocyanines with n-butoxyl groups in all the α-benzo positions of the macrocycle skeleton, MPc(OBu)8, have strong near-infrared absorptions and intense fluorescences that are Stokes shifted by more than 15 nm. Interestingly, the silicon complex 6 is also remarkably photostable and nontoxic. The use of 6 in the fluorescence imaging of BALB/c mice bearing a 4T1-luc2 tumor in the mammary fat pad unambiguously revealed the presence of the tumor when it was only 1 mm in diameter and was not visible with the naked eye. Compound 6 has an intrinsic ability to accumulate in the tumor, adequate spectroscopic properties, and excellent stability to function as a NIR fluorescent label in the early detection of tumors.

The quest for biocompatible phthalocyanines for molecular imaging: Photophysics, relaxometry and cytotoxicity studies.

Water soluble phthalocyanines bearing either four PEG500 or four choline substituents in the macrocyclic structure, as well as their Zn(II) and Mn(III) complexes were synthesized. The metal-free and Zn(II) complexes present relatively high fluorescence quantum yields (up to 0.30), while the Mn(III) complexes show no fluorescence as a consequence of rapid non-radiative deactivation of the Mn(III) phthalocyanine excited states through low-lying metal based or charge-transfer states. The effect of DMSO on the aggregation of the phthalocyanines was studied. It was not possible to obtain the Mn(II) complexes by reduction of the corresponding Mn(III) complexes due to the presence of electron donating substituents at the periphery of the phthalocyanines. The (1)H NMRD plots of the PEG500 and choline substituted Mn(III)-phthalocyanine complexes are typical of self-aggregated Mn(III) systems with r1 relaxivities of 4.0 and 5.7mM(-1)s(-1) at 20MHz and 25°C. The Mn(III)-phthalocyanine-PEG4 complex shows no significant cytotoxicity to HeLa cell cultures after 2h of incubation up to 2mM concentration. After 24h of cell exposure to the compound, significant toxicity was observed for all the concentrations tested with IC50 of 1.105mM.

Ecofriendly porphyrin synthesis by using water under microwave irradiation.

Water, under microwave irradiation and at a temperature of 473 K, reaches pressures above 16 bar, being capable to act as catalyst, without the use of organic solvents and oxidants, for meso-substituted porphyrin synthesis. Sustainability of the reaction is proved by E Factor=35 and EcoScale value of 50.5, the highest so far obtained for porphyrin synthesis. Methodology's wide versatility is clearly demonstrated by the good yields obtained for both aryl and alkyl substituted porphyrins. These reaction conditions represent a huge development, not only by using very high concentrations, minimizing organic solvent usage, but also by eradicating toxic expensive solvents and oxidants.

Size and ability do matter! Influence of acidity and pore size on the synthesis of hindered halogenated meso-phenyl porphyrins catalysed by porous solid oxides.

The rationalisation of the influence of acidity and pore size of several solid oxides so that they selectively act as supports for preparation of encapsulated porphyrin hybrid materials or as catalysts for synthesis of porphyrins in solution is discussed. Encapsulated porphyrin yields are dependent on both the acidity and the material pore size, Al-MCM-41 being the best fitting solid, with Lewis acidity of 120 µmol Py per g and a pore size 30 Å. On the other hand, when the goal is the synthesis of hindered mesoarylporphyrins in solution, the best solid porous catalyst is NaY, with Lewis acidity of 510 µmol Py per g and a pore size 14 Å. This method provides an appealing efficient, reusable and scalable catalyst alternative for one-pot synthesis of meso-arylporphyrins in high yields.