Surgeon eye lens dose monitoring in interventional neuroradiology, cardiovascular and radiology procedures.

PURPOSE: This study investigated the radiation dose to surgeon eye lens for single procedure and normalised to exposure parameters for eight selected neuroradiology, cardiovascular and radiology interventional procedures. METHODS: The procedures investigated were diagnostic study, Arteriovenous Malformations treatment (AVM) and aneurysm embolization for neuroradiology procedures, Coronary Angiography and Percutaneous Transluminal Coronary Angioplasty (CA-PTCA), Pacemaker and Implantable Cardioverter-Defibrillator implantation (PM-ICD), Endovascular Aortic Repair (EVAR) and Fenestrated Endovascular Aortic Repair (FEVAR) for cardiovascular and electrophysiology procedures. CT-guided lung biopsy was also monitored. All procedures were performed with table-mounted and ceiling-suspended shields (0.5 mm lead equivalent thickness), except for FEVAR and PM-ICD where only a table mounted shield was present, and CT-guided lung biopsy where no shield was used. Dose assessment was performed using a dosemeter positioned close to the most exposed eye of the surgeon, outside the protective eyewear. RESULTS: The surgeon most exposed eye lens median Hp(3) equivalent dose for a single procedure, without protective eyewear contribution, was 18 µSv for neuroradiology diagnostic study, 62 µSv for AVM, 38 µSv for aneurysm embolization, 33 µSv for CA-PTCA, 39 µSv for PM-ICD, 49 µSv for EVAR, 2500 µSv for FEVAR, 153 µSv for CT-guided lung biopsy. CONCLUSIONS: In interventional procedures, the 20 mSv/year dose limit for surgeon eye lens exposure might be exceeded if shields or protective eyewear are not used. Surgeon eye lens doses, normalised to single procedures and to exposure parameters, are a valuable tool for determining appropriate radiation protection measures and dedicated eye lens dosemeter assignment.

An overview of different health indicators used in the European Health Systems.

INTRODUCTION: In the European Union three different health systems could be defined according to service delivery, financing, and economic policies: Beveridge, Bismarck and Mixed system. Although health systems are hardly to compare, various organizations are developing methods assessing performance. In the present work the performance of the three systems were evaluated using European Community Health Indicators according to Organization for Economic Cooperation and Development. METHODS: The study has been conducted among the 28 states of the European Union using the following indicators: Standardized death rate for diseases of the circulatory system, standardized death rate of malignant neoplasms, road traffic accidents with injury, life expectancy at birth, incidence of Human Immunodeficiency Virus (HIV), infant deaths, pure alcohol consumption, infants vaccinated against Diphtheria Tetanus Pertussis (DTP), public and total expenditure on health over the period 2001-2010. RESULTS: The variation of health indicators over the observational time shows similar trend of circulatory system diseases and malignant neoplasms death rates, road accidents with injury, infant deaths, life expectancy at birth, public and total health expenditure. Some differences in the trend of HIV incidence, alcohol intake and DTP vaccination rates arise among systems. Grouping countries by health system paradigm and geographical area, resulted in a relevant heterogeneity (I2 ≥ 90%, Pvalue < 0.0001). No clear superiority of a given health delivery system was found with respect to other paradigms. CONCLUSIONS: In accordance with the evidence of our study, it can be stated that best performances are more likely to be linked to country specific economic factors. In conclusion, it was not possible to identify the best health system model.

Knowledge and training needs on built environment and indoor health of Italian public health residents: a national survey.

INTRODUCTION: The Working Group for Hygiene of Built Environment and the National Council of Residents of the Italian Society of Hygiene, Preventive Medicine and Public Health conducted a nation-wide survey to evaluate the knowledge and training needs on Built Environment and Indoor Health of Italian public health residents. RESULTS: The compliance was very high (52,4%), covering the totality of Italian postgraduate schools. The results underline a severe lack of theoretical formation and practical training, but also diffuse discrepancies across the country, and show a strong interest of residents on this topic. CONCLUSIONS: The authors propose to adopt a national core curriculum, and suggest some strategies to improve learning.

European cardiovascular mortality over the last three decades: evaluation of time trends, forecasts for 2016.

BACKGROUND: The circulatory diseases, in particular ischemic heart diseases and stroke, represent the main causes of death worldwide both in high income and in middle and low income countries. Our aim is to provide a comprehensive report to depict the circulatory disease mortality in Europe over the last 30 years and to address the sources of heterogeneity among different countries. METHODS: Our study was performed using the WHO statistical information system - mortality database - and was restricted to the 28 countries belonging to the European Union (EU-28). We evaluated gender and age time series of all circulatory disease mortality, ischemic heart diseases, cerebrovascular diseases, pulmonary and other circulatory diseases and than we performed forecast for 2016. Mortality heterogeneity was evaluated by countries using the Cochrane Q statistic and the I-squared index. RESULTS: Between 1985 and 2011 SDR for deaths attributable to all circulatory system diseases decreased from 440.9 to 212.0 x 100,000 in EU-28 and a clear uniform reduction was observed. Heterogeneity among countries was found to be consistent, therefore different analysis were carried out considering geographical area. CONCLUSIONS: We forecast a reduction in European cardiovascular mortality. Heterogeneity among countries could only in part be explained by both geographical and health expenditure factors.

Radiation dose around a PET scanner installation: comparison of Monte Carlo simulations, analytical calculations and experimental results.

PURPOSE: Monte Carlo study of radiation transmission around areas surrounding a PET room. METHODS: An extended population of patients administered with (18)F-FDG for PET-CT investigations was studied, collecting air kerma rate and gamma ray spectra measurements at a reference distance. An MC model of the diagnostic room was developed, including the scanner and walls with variable material and thickness. MC simulations were carried out with the widely used code GEANT4. RESULTS: The model was validated by comparing simulated radiation dose values and gamma ray spectra produced by a volumetric source with experimental measurements; ambient doses in the surrounding areas were assessed for different combinations of wall materials and shielding and compared with analytical calculations, based on the AAPM Report 108. In the range 1.5-3.0 times of the product between the linear attenuation coefficient and thickness of an absorber (µ x), it was observed that the effectiveness of different combinations of shielding is roughly equivalent. An extensive tabulation of results is given in the text. CONCLUSIONS: The validation tests performed showed a satisfactory agreement between the simulated and expected results. The simulated dose rates incident on, and transmitted by the walls in our model of PET scanner room, are generally in good agreement with analytical estimates performed using the AAPM Publication No. 108 method. This provides an independent confirmation of AAPM's approach. Even in this specific field of application, GEANT4 proved to be a relevant and accurate tool for dosimetry estimates, shielding evaluation and for general radiation protection use.

A new experimental procedure for determination of photoelectric efficiency of a NaI(Tl) detector used for nuclear medicine liquid waste monitoring with traceability to a reference standard radionuclide calibrator.

To determine photopeak efficiency for (99m)Tc of the NaI(Tl) detector used for liquid waste monitoring at the Nuclear Medicine Unit of IRCCS Paediatric Hospital Bambino Gesù in Rome, a specific experimental procedure, with traceability to primary standards, was developed. Working with the Italian National Institute for Occupational Prevention and Safety, two different calibration source geometries were employed and the detector response dependence on geometry was investigated. The large percentage difference (almost 40%) between the two efficiency values obtained showed that geometrical effects cannot be neglected.