RÉSUMÉ
The identification and quantification of caffeine is a common need in the food and pharmaceutical industries and lately also in the field of environmental science. For that purpose, Raman spectroscopy has been used as an analytical technique, but the interpretation of the spectra requires reliable and accurate computational protocols, especially as regards the Resonance Raman (RR) variant. Herein, caffeine solutions are sampled using Molecular Dynamics simulations. Upon quantification of the strength of the non-covalent intermolecular interactions such as hydrogen bonding between caffeine and water, UV-Vis, Raman, and RR spectra are computed. The results provide general insights into the hydrogen bonding role in mediating the Raman spectral signals of caffeine in aqueous solution. Also, by analyzing the dependence of RR enhancement on the absorption spectrum of caffeine, it is proposed that the sensitivity of the RR technique could be exploited at excitation wavelengths moderately far from 266 nm, yet achieving very low detection limits in the quantification caffeine content.
RÉSUMÉ
The fluorescence response of a chromophore in the proximity of a plasmonic nanostructure can be enhanced by several orders of magnitude, yielding the so-called surface-enhanced fluorescence (SEF). An in-depth understanding of SEF mechanisms benefits from fully atomistic theoretical models because SEF signals can be non-trivially affected by the atomistic profile of the nanostructure's surface. This work presents the first fully atomistic multiscale approach to SEF, capable of describing realistic structures. The method is based on coupling density functional theory (DFT) with state-of-the-art atomistic electromagnetic approaches, allowing for reliable physically-based modeling of molecule-nanostructure interactions. Computed results remarkably demonstrate the key role of the NP morphology and atomistic features in quenching/enhancing the fluorescence signal.
RÉSUMÉ
The UV-Vis spectrum of the solvated purine derivative Hypoxanthine (HYX) is investigated using the Quantum Mechanics/Fluctuating Charges (QM/FQ) multiscale approach combined with a sampling of configurations through atomistic Molecular Dynamics (MD) simulations. Keto 1H7H and 1H9H tautomeric forms of HYX are the most stable in aqueous solution and form different stable complexes with the surrounding water molecules, ultimately affecting the electronic absorption spectra. The final simulated spectrum resulting from the combination of the individual spectra of tautomers agrees very well with most of the characteristics in the measured spectrum. The importance of considering the effect of the solute tautomers and, in parallel, the contribution of the different solvent arrangements around the solute when modeling spectral properties, is highlighted. In addition, the high quality of the computed spectra leads to suggesting an alternative way for acquiring tautomeric populations from combined computational/experimental spectra.
RÉSUMÉ
This study focuses on the encapsulation of the entire series of halides by the 512 cage of twenty water molecules and on the characterization of water to water and water to anion interactions. State-of-the-art computations are used to determine equilibrium geometries, energy related quantities, and thermal stability towards dissociation and to dissect the nature and strength of intermolecular interactions holding the clusters as stable units. Two types of structures are revealed: heavily deformed cages for F- indicating a preference for microsolvation, and slightly deformed cages for the remaining anions indicating a preference for encapsulation. The primary variable dictating the properties of the clusters is the charge density of the central halide, with the most severe effects observed for the F- case. For the remaining halides, the anion may be safely viewed as a sort of "big electron" with little local disruptive power, enough to affect the network of non-covalent hydrogen bonds in the cage, but not enough to break it. Gibbs energies for dissociation either into cavity and halide or into water molecules and halide suggest that, in a similar way as to methane clathrate, a more weakly bonded complex that has been detected in the gas phase, all halide containing clathrate-like structures should be amenable to experimental detection in the gas phase at moderate temperature and pressure conditions.
RÉSUMÉ
Fully atomistic multiscale polarizable quantum mechanics (QM)/molecular mechanics (MM) approaches, combined with techniques to sample the solute-solvent phase space, constitute the most accurate method to compute spectral signals in aqueous solution. Conventional sampling strategies, such as classical molecular dynamics (MD), may encounter drawbacks when the conformational space is particularly complex, and transition barriers between conformers are high. This can lead to inaccurate sampling, which can potentially impact the accuracy of spectral calculations. For this reason, in this work, we compare classical MD with enhanced sampling techniques, i.e., replica exchange MD and metadynamics. In particular, we show how the different sampling techniques affect computed UV, electronic circular dichroism, nuclear magnetic resonance shielding, and optical rotatory dispersion of N-acetylproline-amide in aqueous solution. Such a system is a model peptide characterized by complex conformational variability. Calculated values suggest that spectral properties are influenced by solute conformers, relative population, and solvent effects; therefore, particular care needs to be paid for when choosing the sampling technique.
RÉSUMÉ
Simulating electronic properties and spectral signals requires robust computational approaches that need tuning with the system's peculiarities. In this paper, we test implicit and fully atomistic solvation models for the calculation of UV-vis and electronic circular dichroism (ECD) spectra of two pharmaceutically relevant molecules, namely, (2S)-captopril and (S)-naproxen, dissolved in aqueous solution. Room temperature molecular dynamics simulations reveal that these two drugs establish strong contacts with the surrounding solvent molecules via hydrogen bonds. Such specific interactions, which play a major role in the spectral response and are neglected in implicit approaches, are further characterized and quantified with natural bond orbital methods. Our calculations show that simulated spectra, and especially ECD, are in good agreement with experiments solely when conformational and configurational dynamics, mutual polarization, and solute-solvent repulsion effects are considered.
Sujet(s)
Simulation de dynamique moléculaire , Eau , Solvants/composition chimique , Eau/composition chimique , Solutions , Dichroïsme circulaireRÉSUMÉ
There is experimental evidence that solid mixtures of the rhodium dimer [Cp*RhCl2]2 and benzo[h] quinoline (BHQ) produce two different polymorphic molecular cocrystals called 4α and 4ß under ball milling conditions. The addition of NaOAc to the mixture leads to the formation of the rhodacycle [Cp*Rh-(BHQ)Cl], where the central Rh atom retains its tetracoordinate character. Isolate 4ß reacts with NaOAc leading to the same rhodacycle while isolate 4α does not under the same conditions. We show that the puzzling difference in reactivity between the two cocrystals can be traced back to fundamental aspects of the intermolecular interactions between the BHQ and [Cp*RhCl2]2 fragments in the crystalline environment. To support this view, we report a number of descriptors of the nature and strength of chemical bonds and intermolecular interactions in the extended solids and in a cluster model. We calculate formal quantum mechanical descriptors based on electronic structure, electron density, and binding and interaction energies including an energy decomposition analysis. Without exception, all descriptors point to 4ß being a transient structure higher in energy than 4α with larger local and global electrophilic and nucleophilic powers, a more favorable spatial and energetic distribution of the frontier orbitals, and a more fragile crystal structure.
RÉSUMÉ
We present a three-layer hybrid quantum mechanical/quantum embedding/molecular mechanics approach for calculating nuclear magnetic resonance (NMR) shieldings and J-couplings of molecular systems in solution. The model is based on the frozen density embedding (FDE) and polarizable fluctuating charges (FQ) and fluctuating dipoles (FQFµ) force fields and permits the accurate ab initio description of short-range nonelectrostatic interactions by means of the FDE shell and cost-effective treatment of long-range electrostatic interactions through the polarizable force field FQ(Fµ). Our approach's accuracy and potential are demonstrated by studying NMR spectra of Brooker's merocyanine in aqueous and nonaqueous solutions.
RÉSUMÉ
We study the adsorption process of model peptides, nucleobases, and selected standard ligands on gold through the development of a computational protocol based on fully atomistic classical molecular dynamics (MD) simulations combined with umbrella sampling techniques. The specific features of the interface components, namely, the molecule, the metallic substrate, and the solvent, are taken into account through different combinations of force fields (FFs), which are found to strongly affect the results, especially changing absolute and relative adsorption free energies and trends. Overall, noncovalent interactions drive the process along the adsorption pathways. Our findings also show that a suitable choice of the FF combinations can shed light on the affinity, position, orientation, and dynamic fluctuations of the target molecule with respect to the surface. The proposed protocol may help the understanding of the adsorption process at the microscopic level and may drive the in-silico design of biosensors for detection purposes.
RÉSUMÉ
The use of atom probe tomography (APT) for mineral analysis is contributing to fundamental studies in Earth Sciences. Meanwhile, the need for standardization of this technique is becoming evident. Pending the use of mineral standards, the optimization of analysis parameters is needed to facilitate the study of different mineral groups in terms of data collection and quality. The laser pulse rate and energy are variables that highly affect the atom evaporation process occurring during APT analysis, and their testing is important to forecast mineral behavior and obtain the best possible data. In this study, five minerals representative of major groups (albite, As-pyrite, barite, olivine, and monazite) were analyzed over a range of laser pulse energies (10-50 pJ) and rates (100-250 kHz) to assess output parameter quality and evaluate compositional estimate stoichiometry. Among the studied minerals, As-pyrite, with the higher thermal conductivity and lower band gap, was the most affected by the laser pulse variation. Chemical composition estimates equal or close to the general chemical formula were achieved for monazite and As-pyrite. The analysis of multihit events has proved to be the best strategy to verify the efficacy of the evaporation process and to evaluate the best laser pulse setting for minerals.
RÉSUMÉ
We present quantum mechanics (QM)/frequency dependent fluctuating charge (QM/ωFQ) and fluctuating dipoles (QM/ωFQFµ) multiscale approaches to model surface-enhanced Raman scattering spectra of molecular systems adsorbed on plasmonic nanostructures. The methods are based on a QM/classical partitioning of the system, where the plasmonic substrate is treated by means of the atomistic electromagnetic models ωFQ and ωFQFµ, which are able to describe in a unique fashion and at the same level of accuracy the plasmonic properties of noble metal nanostructures and graphene-based materials. Such methods are based on classical physics, i.e. Drude conduction theory, classical electrodynamics, and atomistic polarizability to account for interband transitions, by also including an ad-hoc phenomenological correction to describe quantum tunneling. QM/ωFQ and QM/ωFQFµ are thus applied to selected test cases, for which computed results are compared with available experiments, showing the robustness and reliability of both approaches.
RÉSUMÉ
[This corrects the article DOI: 10.1021/acs.jpcc.1c04716.].
RÉSUMÉ
Molecular spectral signals can be significantly altered by solvent effects. Among the many theoretical approaches to this problem, continuum and atomistic solvation models have emerged as the most effective for properly describing solvent effects on the spectroscopic signal. In this feature article, we review the continuum and atomistic descriptions as applied to the calculation of molecular spectra, by detailing the similarities and differences between the two approaches from the formal point of view and by analyzing their advantages and disadvantages from the computational point of view. Various spectral signals, of increasing complexity, are considered and illustrative examples, selected to exacerbate the differences between the two approaches, are discussed.
RÉSUMÉ
UV-vis spectra of anionic ibuprofen and naproxen in a model lipid bilayer of the cell membrane are investigated using computational techniques in combination with a comparative analysis of drug spectra in purely aqueous environments. The simulations aim at elucidating the intricacies behind the negligible changes in the maximum absorption wavelength in the experimental spectra. A set of configurations of the systems constituted by lipid, water, and drugs or just water and drugs are obtained from classical Molecular Dynamics simulations. UV-vis spectra are computed in the framework of atomistic Quantum Mechanical/Molecular Mechanics (QM/MM) approaches together with Time-Dependent Density Functional Theory (TD-DFT). Our results suggest that the molecular orbitals involved in the electronic transitions are the same, regardless of the chemical environment. A thorough analysis of the contacts between the drug and water molecules reveals that no significant changes in UV-vis spectra are a consequence of ibuprofen and naproxen molecules being permanently microsolvated by water molecules, despite the presence of lipid molecules. Water molecules microsolvate the charged carboxylate group as expected but also microsolvate the aromatic regions of the drugs.
Sujet(s)
Naproxène , Eau , Eau/composition chimique , Ibuprofène , Théorie quantique , Membrane cellulaire , LipidesRÉSUMÉ
Terahertz spectroscopy is a perfect tool to investigate the electronic intraband conductivity of graphene, but a phenomenological model (Drude-Smith) is often needed to describe disorder. By studying the THz response of isotropically strained polycrystalline graphene and using a fully atomistic computational approach to fit the results, we demonstrate here the connection between the Drude-Smith parameters and the microscopic behavior. Importantly, we clearly show that the strain-induced changes in the conductivity originate mainly from the increased separation between the single-crystal grains, leading to enchanced localization of the plasmon excitations. Only at the lowest strain values explored, a behavior consistent with the deformation of the individual grains can instead be observed.
RÉSUMÉ
We present a novel multiscale approach to study the electronic structure of open shell molecular systems embedded in an external environment. The method is based on the coupling of multilevel Hartree-Fock (MLHF) and Density Functional Theory (MLDFT), suitably extended to the unrestricted formalism, to Molecular Mechanics (MM) force fields (FF). Within the ML region, the system is divided into active and inactive parts, thus describing the most relevant interactions (electrostatic, polarization, and Pauli repulsion) at the quantum level. The surrounding MM part, which is formulated in terms of nonpolarizable or polarizable FFs, permits a physically consistent treatment of long-range electrostatics and polarization effects. The approach is extended to the calculation of hyperfine coupling constants and applied to selected nitroxyl radicals in an aqueous solution.
RÉSUMÉ
UV-Resonance Raman (RR) spectroscopy is a valuable tool to study the binding of drugs to biomolecular receptors. The extraction of information at the molecular level from experimental RR spectra is made much easier and more complete thanks to the use of computational approaches, specifically tuned to deal with the complexity of the supramolecular system. In this paper, we propose a protocol to simulate RR spectra of complex systems at different levels of sophistication, by exploiting a quantum mechanics/molecular mechanics (QM/MM) approach. The approach is challenged to investigate RR spectra of a widely used chemotherapy drug, doxorubicin (DOX) intercalated into a DNA double strand. The computed results show good agreement with experimental data, thus confirming the reliability of the computational protocol.
Sujet(s)
Doxorubicine , Analyse spectrale Raman , Reproductibilité des résultats , Simulation de dynamique moléculaire , ADN , Théorie quantiqueRÉSUMÉ
In this Perspective, we outline the essential physicochemical aspects that need to be considered when building a reliable approach to describe absorption properties of solvated systems. In particular, we focus on how to properly model the complexity of the solvation phenomenon, arising from dynamical aspects and specific, strong solute-solvent interactions. To this end, conformational and configurational sampling techniques, such as Molecular Dynamics, have to be coupled to accurate fully atomistic Quantum Mechanical/Molecular Mechanics (QM/MM) methodologies. By exploiting different illustrative applications, we show that an effective reproduction of experimental spectral signals can be achieved by delicately balancing exhaustive sampling, hydrogen bonding, mutual polarization, and nonelectrostatic effects.
RÉSUMÉ
Neutral (n) and zwitterionic (z) forms of cysteine monomers are combined in this work to extensively explore the potential energy surfaces for the formation of cysteine dimers in aqueous environments represented by a continuum. A simulated annealing search followed by optimization and characterization of the candidate structures afforded a total of 746 structurally different dimers held together via 80 different types of intermolecular contacts in 2894 individual non-covalent interactions as concluded from Natural Bond Orbitals (NBO), Quantum Theory of Atoms in Molecules (QTAIM) and Non-Covalent Interactions (NCI) analyses. This large pool of interaction possibilities includes the traditional primary hydrogen bonds and salt bridges which actually dictate the structures of the dimers, as well as the less common secondary hydrogen bonds, exotic Xâ¯Y (X = C, N, O, S) contacts, and Hâ¯H dihydrogen bonds. These interactions are not homogeneous but have rather complex distributions of strengths, interfragment distances and overall stabilities. Judging by their Gibbs bonding energies, most of the structures located here are suitable for experimental detection at room conditions.
Sujet(s)
Cystéine , Théorie quantique , Polymères , Liaison hydrogèneRÉSUMÉ
The performance of different quantum mechanics/molecular mechanics embedding models to compute vacuo-to-water solvatochromic shifts is investigated. In particular, both nonpolarizable and polarizable approaches are analyzed and computed results are compared to reference experimental data. We show that none of the approaches outperform the others and that errors strongly depend on the nature of the molecular transition to be described. Thus, we prove that the best choice of embedding model highly depends on the molecular system and that the use of a specific approach as a black box can lead to significant errors and, sometimes, totally wrong predictions.