RÉSUMÉ
INTRODUCTION: Research on nanotechnology in medicine has also involved the ocular field and nanomicelles are among the applications developed. This approach is used to increase both the water solubility of hydrophobic drugs and their penetration/permeation within/through the ocular tissues since nanomicelles are able to encapsulate insoluble drug into their core and their small size allows them to penetrate and/or diffuse through the aqueous pores of ocular tissues. AREAS COVERED: The present review reports the most significant and recent literature on the use of nanomicelles, made up of both surfactants and amphiphilic polymers, to overcome limitations imposed by the physiology of the eye in achieving a high bioavailability of drugs intended for the therapeutic areas of greatest commercial interest: dry eye, inflammation, and glaucoma. EXPERT OPINION: The results of the numerous studies in this field are encouraging and demonstrate that nanomicelles may be the answer to some of the challenges of ocular therapy. In the future, new molecules self-assembling into micelles will be able to meet the regulatory requirements for marketing authorization for their use in ophthalmic formulations.
Sujet(s)
Micelles , Solutions ophtalmiques , Humains , Solutions ophtalmiques/administration et posologie , Animaux , Nanoparticules , Administration par voie ophtalmique , Systèmes de délivrance de médicaments , Tensioactifs/composition chimique , Biodisponibilité , Solubilité , Nanotechnologie , Polymères/composition chimique , Glaucome/traitement médicamenteuxRÉSUMÉ
The treatment of several ocular inflammatory conditions affecting different areas of the ocular globe involves the administration of topical ophthalmic formulations containing corticosteroids. This research was aimed at evaluating the solubilising efficacy of 5.0% w/w of different binary mixtures of commercial amphiphilic polymeric surfactants with the purpose of obtaining nanomicellar solutions containing a high amount of loteprednol etabonate (LE). The selected LE-TPGS/HS nanomicelles, containing 0.253 mg/mL of the drug, had a small size (=13.57 nm) and uniform distribution (Polydispersity Index = 0.271), appeared completely transparent and perfectly filterable through 0.2 µm membrane filter, and remained stable up to 30 days at 4 °C. The critical micellar concentration (CMCTPGS/HS) was 0.0983 mM and the negative value of the interaction parameter between the polymeric-surfactant-building unit (ßTPGS/HS = -0.1322) confirmed the ability of the polymeric surfactants to interact, favouring the dissolution of LE into nanomicelles. The disappearance of the endothermic peak of LE in the DSC analysis confirmed the interactions of LE with the polymeric surfactants. LE-TPGS/HS produced in vitro LE which sustained diffusion for 44 h (more than 40% of encapsulated LE). Furthermore, the lack of a significant cytotoxic effect on a sensitive corneal epithelial cell line makes it a candidate for further biological studies.
RÉSUMÉ
In recent years, the demand for high-quality solar products that combine high efficacy with environmentally friendly characteristics has increased. Among the coral-safe sunscreens, ethylhexyl triazone (Uvinul® T150) is an effective organic UVB filter, photostable and practically insoluble in water, therefore difficult to be formulated in water-based products. Oil-free sunscreens are considered ideal for most skin types, as they are not comedogenic and do not leave the skin feeling greasy. Recent studies reported that pollen grains might represent innovative drug delivery systems for their ability to encapsulate and release active ingredients in a controlled manner. Before being used, the pollen grains must be treated to remove cellular material and biomolecules, which could cause allergic reactions in predisposed subjects; the obtained hollow structures possess uniform diameter and a rigid wall with openings that allow them to be filled with bioactive substances. In the present work, pollen from Lycopodium clavatum has been investigated both as a delivery system for ethylhexyl triazone and as an active ingredient by evaluating its photoprotective capacity. The goal is to obtain environmentally friendly solar aqueous formulations that take advantage of both sunscreen and sporopollenin microcapsules' UV protection with a relatively low cost, as these pollen grains are widely available.
RÉSUMÉ
The ocular endocannabinoid system (ECS) including enzymes and CB1/CB2 receptors determines various substantial effects, such as anti-inflammatory activity and reduction of the intraocular pressure (IOP). The modulation of 2-arachidonoylglycerol (2-AG) levels obtained via MAGL inhibition is considered as a promising pharmacological strategy to activate the ECS. Within the scope of this study, the effect of a selective monoacylglycerol lipase (MAGL) inhibitor (MAGL17b) was investigated by measuring the IOP reduction in normotensive rabbits after performing a solubilisation process of the molecule with non-ionic surfactants, to produce suitable eye drops containing the highest possible concentration of the drug. Furthermore, the study involved the evaluation of cytotoxicity and of in vitro/ex vivo corneal permeation of MAG17b of selected formulations based on polyoxyl(35)castor oil (C-EL) and polyethylene glycol (80) sorbitan monolaurate (TW80). The solubilisation of 0.5 mM MAGL17b with 3 % w/w TW80 (TW80/3-17b), through the formation of NanoMicellar structures (diameter of 12.3 nm), determined a significant permeation of MAGL17b, both through excised rabbits corneas and reconstituted corneal epithelium, with a limited corneal epithelial cells death. The blockade of MAGL activity induced a IOP reduction up to 4 mmHg in albino and pigmented rabbits after topical instillation, thus confirming the potential efficacy of the MAGL inhibition approach in the treatment of ocular pathologies.
Sujet(s)
Acylglycerol lipase , Monoglycérides , Animaux , Cornée , Endocannabinoïdes , Antienzymes , Pression intraoculaire , Solutions ophtalmiques , LapinsRÉSUMÉ
BACKGROUND: Onychomycosis produces nail chromatic alterations that lead patients to mask them with cosmetic enamels. Objectives: Evaluate drug transungual permeation and antimycotic activity against selected strains after application of CPX-HPCH nail lacquer (NL) on the nail pre-covered with breathable cosmetic polish. METHODS: CPX transungual permeation after applying CPX-HPCH NL once or twice a day on bovine hoof membranes pre-covered with a breathable cosmetic nail polish was compared to that obtained applying CPX-HPCH NL directly on the membrane. The relevant experimental permeates underwent an in vitro susceptibility test. RESULTS: After CPX-HPCH NL application once a day, the drug transungual flux in the presence of cosmetic product tended to decrease while maintaining the antifungal activity. Two daily applications of CPX-HPCH NL on the membrane pre-covered with cosmetic polish exhibited the same permeation profile as daily application of the medicated lacquer directly on the nail as well as the same microbiological activity. CONCLUSIONS: The breathable cosmetic nail polish can be applied on the nail affected by onychomycosis in association with CPX-HPCH NL to mask the imperfections. The application of CPX-HPCH NL twice a day appears to be a good solution to obtain the same results as for a daily application without the presence of the cosmetic layer.
RÉSUMÉ
Hydrogels are complex hydrophilic structures, consisting of crosslinked homopolymers or copolymers insoluble in water. Due to their controllable bio-physicochemical properties mimicking the morphology of the native extracellular matrix, they are a key part of a lot of research fields, including medicine, pharmaceutics, and tissue engineering. This paper was focused on the preparation and characterization of hydrogels from different blends of polyvinyl alcohol (PVA) with microcrystalline cellulose (MCC) and gelatin (GEL) at various ratios, and from gelatin and chitosan alone to understand their feasibility of utilizing as corneal stroma substitutes in permeability tests for drug candidate molecules in early stages of their development. The characterization was carried out by differential scanning calorimetry, electron microscopy (SEM), water content, mass loss, water permeability, wettability, and tensile stress-strain tests. After the physicochemical characterization, PVA/MCC blend and chitosan proved to be the most promising constructs, showing negligible mass loss after immersion in aqueous medium for two weeks and low hydrodynamic permeability. They were then employed in drug molecules permeation studies and these data were compared to that obtained through excised tissues. The results obtained showed that PVA/MCC hydrogels have similar mechanical and permeability properties to corneal stroma.
RÉSUMÉ
Androgenetic alopecia is a multifactorial condition characterized by noticeable hair loss, affecting both men and women and representing a debilitating and chronic disorder that considerably affects the quality of life. Available topical treatments based on minoxidil or finasteride require repeated applications and are associated with a certain number of adverse effects. The challenges associated with current treatments pave the way for the research of new therapeutic strategies, more precise and selective, and capable of providing long-term results. In this context, the present review examines the new proposed formulation strategies to deliver 5-α-reductase inhibitors in order to obtain a targeted drug delivery, for improving drug retention at the site of action in the hair follicle, contemporaneously reducing drug systemic absorption, which is the cause of important adverse effects. In particular, the research will be focused on the several aspects that influence the performance of nanostructured drug delivery systems in creating a depot in the hair follicles, such as particle size, surface charge, excipients, and combined application with external stimuli (infrared radiation, mechanical massage, ultrasounds application).
RÉSUMÉ
BACKGROUND: Oleuropein is already known for its numerous pharmacological properties, but its activity in the ocular field has not yet been investigated. The study aims to verify a possible use of oleuropein (OLE)-based eye drops both in terms of efficacy in dry eye syndrome and stability in aqueous solution. METHODS: OLE was co-precipitated with HP-ß-cyclodextrin, and the obtained complex was encapsulated into liposomes prepared by hydration of a lipid film composed of Lipoid S100 and cholesterol with different pH buffer solutions. The hydrated vesicles were shrunk by ultrasonication or extrusion. The preparations were characterized from the physicochemical point of view by subjecting them to differential scanning calorimetry, ATR-FTIR, dynamic light scattering analysis, and microscopy. Subsequently, OLE protective activity against hyperosmotic and oxidative stress on rabbit corneal epithelial cells (RCE) was evaluated. RESULTS: The liposomal vesicles obtained after extrusion showed a tendency towards greater encapsulation efficiency (up to 80.77%) compared to that obtained by sonication, and the liposomes hydrated in pH 5.5 solution tended to incapsulate more than the neutral ones. Ultrasonication produced two-dimensional populations of liposomes, the largest of which reached 2149 nm. On the contrary, the extruded liposomes showed homogeneous diameters of about 250 nm. Complexation with cyclodextrin and subsequent encapsulation in liposomes greatly increased the OLE stability in aqueous solution, especially at 4 °C and for the extruded formulations. OLE aqueous solution (OLE7.4-sol, reference) and neutral extruded liposomes (F7.4-e) were well tolerated on RCE cells. Moreover, OLE was able to control the effects of hyperosmolarity on ocular surface cells and to prevent oxidative stress-induced loss of cell viability.
RÉSUMÉ
We report on hybrid nanomicelle-polymer inserts for improved delivery of cyclosporine A (CyA) to the surface of the eye. Hybrid inserts containing a nanomicellar formulation were prepared by the solvent casting method; their characteristics, in vitro release of CyA, eye irritation potential, nanomicelle distribution inside the insert, and in vivo pharmacokinetics of the most promising solid formulation (F3) were investigated. Nanomicelles capable of accommodating a therapeutically relevant amount of CyA (57.22 ± 5.90-68.52 ± 1.4 µg) were incorporated into five different polymeric formulations (F1-F5). The developed inserts displayed promising characteristics (size, weight, surface pH, and contact angle) that fulfill ocular tolerability requirements. Considering the technological properties and CyA in vitro release, F3 and F5 were the most promising formulations. SEM analysis suggested the F3 formulation as the potential prototype for CyA ocular delivery. The F3 formulation (CyA: 60.08 ± 2.85 µg) did not induce conjunctival irritation when HET-CAM assay was performed and was hence considered suitable for further study in a rabbit eye. The AUC value for CyA loaded in the F3 insert was about 2-fold greater than that obtained with the Ikervis® used as a control formulation. F3 produced a significant reduction (of about 7-folds) in the rate of CyA elimination from the tear fluid relative to Ikervis® and about 4-fold greater reduction than Nano-CyA (p = 0.0187). The ability of F3 to delay the elimination of the drug from the precorneal area is particularly desirable when treating dry eye syndrome. Furthermore, F3 did not induce ocular discomfort, a typical characteristic of solid ocular inserts, including commercially available ones.
Sujet(s)
Ciclosporine , Syndromes de l'oeil sec , Animaux , Syndromes de l'oeil sec/traitement médicamenteux , Micelles , Polymères , LapinsRÉSUMÉ
Chitosan is receiving increasing attention from the food industry for being a biodegradable, non-toxic, antimicrobial biopolymer able to extend the shelf life of, and preserve the quality of, fresh food. However, few studies have investigated the ability of chitosan-based coatings to allow the diffusion of bioactive compounds into the food matrix to improve its nutraceutical quality. This research is aimed at testing whether a hydrophilic molecule (tyrosol) could diffuse from the chitosan-tyrosol coating and cross the tomato peel. To this end, in vitro permeation tests using excised tomato peel and an in vivo application of chitosan-tyrosol coating on tomato fruit, followed by tyrosol quantification in intact fruit, peel and flesh during a seven-day storage at room temperature, were performed. Both approaches demonstrated the ability of tyrosol to permeate across the fruit peel. Along with a decreased tyrosol content in the peel, its concentration within the flesh was increased, indicating an active transfer of tyrosol into this tissue. This finding, together with the maintenance of constant tyrosol levels during the seven-day storage period, is very promising for the use of chitosan formulations to produce functional tomato fruit.
RÉSUMÉ
A combination of in situ gelling systems and a loaded drug self-assembling nanomicellar carrier was chosen in this study as a new potential Ocular Drug Delivery System (ODDS) for Cyclosporine-A (CyA), a poorly water-soluble drug. Two non-ionic surfactants (d-α-tocopherol polyethylene glycol succinate, VitE-TPGS and polyoxyl 40 hydrogenated castor oil, RH-40) were used to produce the nanomicelles. The physical-chemical characterization of the nanomicelles in terms of CyA entrapment (EE%) and loading efficiency (LE%), cloud point (CP), regeneration time (RT), size and polydispersity index (PI) allowed us to select the best combination of surfactant mixture, which showed appropriate stability, high CyA-EE (99.07%), very small and homogeneous dimensions and favored the solubilization of an amount of CyA (0.144% w/w) comparable to that contained in marketed emulsion Ikervis®. The selected nanomicellar formulation incorporated into optimized ion-sensitive polymeric dispersions of gellan gum (GG-LA: 0.10, 0.15 and 0.20% w/w) able to trigger the sol-gel transition after instillation was characterized from technological (osmolality, pH, gelling capacity, rheological behavior, wettability, TEM and storage stability at 4 and 20 °C) and biopharmaceutical points of view. This new combined approach allowed us to obtain clear aqueous dispersions that were easy to instill and able to form a viscous gel when in contact with the tear fluid, improving CyA ocular bioavailability. Furthermore, this new ODDS prevented CyA transcorneal permeation, exhibited low cytotoxicity and prolonged the CyA resident time in the precorneal area compared to Ikervis®.
RÉSUMÉ
For topical treatment of skin cancer, the design of pH-responsive nanocarriers able to selectively release the drug in the tumor acidic microenvironment represents a reliable option for targeted delivery. In this context, a series of newly synthesized surface-active fatty acid-protic ionic liquids (FA-PILs), based on tetramethylguanidinium cation and different natural hydrophobic fatty acid carboxylates, have been investigated with the aim of developing a pH-sensitive nanostructured drug delivery system for cutaneous administration in the skin cancer therapy. The capability of FA-PILs to arrange in micelles when combined with each other and with the non-ionic surfactant d-α-Tocopherol polyethylene glycol succinate (vitamin E TPGS) as well as their ability to solubilize imiquimod, an immuno-stimulant drug used for the treatment of skin cancerous lesions, have been demonstrated. The FA-PILs-TPGS mixed micelles showed pH-sensitivity, suggesting that the acidic environment of cancer cells can trigger nanostructures' swelling and collapse with consequent rapid release of imiquimod and drug cytotoxic potential enhancement. The in vitro permeation/penetration study showed that the micellar formulation produced effective imiquimod concentrations into the skin exposed to acid environment, representing a potential efficacious and selective drug delivery system able to trigger the drug release in the tumor tissues, at lower and less irritating drug concentrations.
RÉSUMÉ
Infectious ocular keratitis is the leading cause of blindness worldwide. Bacterial resistance to classical pharmacological treatments raised the interest of researchers towards antimicrobial peptide (AMP)-based therapy. hLF 1-11, a synthetic antimicrobial peptide derived from the N-terminus of human lactoferrin, proved effective against different bacteria and yeast but, like all proteinaceous materials, it is unstable from chemical, physical, and biological points of view. In this study, new freeze-dried solid matrices containing mucoadhesive polymers were prepared and characterized in terms of rheology, hydration time, bioadhesion, drug content, and in vitro release. The formulation HPMC/T2/HA/hLF 1-11fd was selected for the delivery of hLF 1-11, since it showed good drug recovery and no chemical degradation up to at least 6 months (long-term stability). Furthermore, the HPMC/T2/HA/hLF 1-11fd matrix allowed for the release of the drug in a simulated physiological environment, linked to an optimal hydration time, and the peptide antimicrobial activity was preserved for up to 15 months of storage, a very promising result considering the chemical liability of proteinaceous material. For its properties, the freeze-dried matrix developed in this study could be a good platform for the delivery of antimicrobial peptides in the precorneal area to treat infectious phenomena of the ocular surface.
Sujet(s)
Administration par voie ophtalmique , Anti-infectieux/composition chimique , Vecteurs de médicaments/composition chimique , Lactoferrine/composition chimique , Fragments peptidiques/composition chimique , Adhésifs/composition chimique , Anti-infectieux/administration et posologie , Anti-infectieux/pharmacologie , Libération de médicament , Lyophilisation , Acide hyaluronique/composition chimique , Dérivés de l'hypromellose/composition chimique , Fragments peptidiques/administration et posologie , Fragments peptidiques/pharmacologie , Stabilité protéique , Staphylococcus epidermidis/effets des médicaments et des substances chimiquesRÉSUMÉ
The physiological protective mechanisms of the eye reduce the bioavailability of topically administered drugs above all for those with high molecular weight and /or lipophilic characteristics, such as Cyclosporine A (CyA). The combined strategy based on the association of nanomicelles and mucoadhesive polymer seems promising since a limited number of commercial products containing CyA have been recently approved. The scope of this investigation was the design of Assembling Surfactants-Mucoadhesive Polymer Nanomicelles (ASMP-Nano), based on a binary system of two surfactants in combination with hyaluronic acid, and their biopharmaceutical evaluation. The optimisation of the ASMP-Nano in term of the amount of surfactants, CyA-loading and size determined the selection of the clear and stable Nano1HAB-CyA formulation containing 0.105% w/w CyA loaded-nanomicelles with a size of 14.41 nm. The nanostructured system had a protective effect towards epithelial corneal cells with a cell viability of more than 80%. It interacted with cellular barriers favouring the uptake and the accumulation of CyA into the cells as evidenced by fluorescent probe distribution, by hindering CyA permeation through reconstituted corneal epithelial tissue. In pharmacokinetics study on rabbits, the nanomicellar carrier prolonged the CyA retention time in the precorneal area mainly in presence of hyaluronic acid (HA), a mucoadhesive polymer.
RÉSUMÉ
Nail is a strong and resistant structure, characterized by a low permeability to foreign molecules. Nails can be subjected to many diseases, among which fungal infections (e.g. onchomycosis) are the most common and responsible for nail structure alteration. Many formulations have been produced for the delivery of active ingredients to treat nail disorders, based on newly synthesized active molecules or containing chemical enhancers or chemically-modified polymers able to improve the drug transungual penetration. To avoid permanent alterations of the nail structure due to the use of chemical compounds or organic solvent-based formulation, researchers have developed novel formulations focusing on the use of new natural-based compounds. The purpose of this review is to provide information on the outcoming of natural ingredients-based formulations that have been developed in the last years as potential alternative to chemical-based formulations.
Sujet(s)
Produits biologiques/usage thérapeutique , Onychopathies , Administration par voie topique , Antifongiques/usage thérapeutique , Chimie pharmaceutique , Humains , Onychopathies/traitement médicamenteux , Ongles , PerméabilitéRÉSUMÉ
The aim of the study was the evaluation of the suitability of 5-oxo-2-pyrrolidinecarboxylic acid (PCA), also in combination with hyaluronic acid (HA), as artificial tears for treatment of dry eye syndrome (DES). Different aqueous formulations containing 0.10% w/w of PCA were used to determine: (i) ex vivo permeation profile of PCA in isolated rabbit corneas; (ii) in vivo residence time of PCA in the precorneal area of rabbits; and (iii) in vivo ability of PCA to counteract the reduction of tear production in an experimental model of DES induced in rabbits. The pharmacokinetic profile of PCA in tear fluid was characterized by high concentrations immediately after application, followed by a rapid decrease, with half-life values of 17.16 and 22.27 min for solutions containing PCA alone and in combination with HA, respectively, when 100 µL of solutions were instilled. The addition of HA almost doubled the PCA bioavailability minimizing the ex vivo apparent corneal permeability of PCA. A positive Shirmer Test Score (STS) was observed for PCA compared to contralateral eyes at all days of treatment for PCA/HA formulation. PCA provides protection from desiccation probably for its osmoprotective activity and high waterâ»binding capability, and this behaviour was enhanced by HA.
RÉSUMÉ
This work was aimed to tune solid matrices for bevacizumab (BVZ) subconjunctival or intravitreal administration in order to prolong drug release, to reduce the number of applications and consequently the side effects. Matrices, with sizes suitable for intravitreal or subconjunctival administration, based on hydroxypropylmethyl cellulose (HPMC), polyvinylpyrrolidone (PVP), polyvinyl alcohol (PVA) and polyacrylic acid (PAA) were obtained by freeze-drying of polymeric dispersions either in phosphate buffer solution or water and were sterilized by gamma rays. The matrices were characterized from the technological point of view and evaluated for in vitro release of dextran and BVZ. In vivo evaluation of BVZ release in ocular humours was finally carried out on rabbits. The obtained matrices showed solvent sorption time ranging from a few seconds for PAA to 46 min for HPMC, with shorter times when prepared in buffer solution. The hydration times were up to 5.5-fold higher after sterilization. HPMC and PVA matrices showed a slowdown of the release rate of both dextran and BVZ, but HPMC was selected for following in vivo studies also in consideration of its higher viscosity after rehydration of the matrix. HPMC matrix was well tolerated by the rabbit eye when intravitreally and subconjunctivally administered. The different treatment produced the same effect in terms of drug concentration in aqueous and vitreous humour up to 12 weeks after administration. The results of this study support the possible use of lyophilized matrices as a BVZ delivery system to the posterior segment of the eye.
Sujet(s)
Inhibiteurs de l'angiogenèse/administration et posologie , Bévacizumab/administration et posologie , Administration par voie ophtalmique , Inhibiteurs de l'angiogenèse/composition chimique , Animaux , Bévacizumab/composition chimique , Préparations à action retardée/administration et posologie , Préparations à action retardée/composition chimique , Libération de médicament , Stabilité de médicament , Oeil/effets des médicaments et des substances chimiques , Oeil/métabolisme , Lyophilisation , Pression intraoculaire/effets des médicaments et des substances chimiques , Mâle , Polymères/administration et posologie , Polymères/composition chimique , Lapins , Rhéologie , Stérilisation , Viscosité , Eau/composition chimiqueRÉSUMÉ
The ocular bioavailability of lipophilic drugs, such as dexamethasone, depends on both drug water solubility and mucoadhesion/permeation. Cyclodextrins and chitosan are frequently employed to either improve drug solubility or prolong drug contact onto mucosae, respectively. Although the covalent conjugation of cyclodextrin and chitosan brings to mucoadhesive drug complexes, their water solubility is restricted to acidic pHs. This paper describes a straightforward grafting of methyl-ß-cyclodextrin (MCD) on quaternary ammonium chitosan (QA-Ch60), mediated by hexamethylene diisocyanate. The resulting product is a water-soluble chitosan derivative, having a 10-atom long spacer between the quaternized chitosan and the cyclodextrin. The derivative is capable of complexing the model drug dexamethasone and stable complexes were also observed for the lyophilized products. Furthermore, the conjugate preserves the mucoadhesive properties typical of quaternized chitosan and its safety as solubilizing excipient for ophthalmic applications was preliminary assessed by in vitro cytotoxicity evaluations. Taken as a whole, the observed features appear promising for future processing of the developed product into 3D solid forms, such as controlled drug delivery systems, films or drug eluting medical devices.
Sujet(s)
Chitosane/composition chimique , Dexaméthasone/composition chimique , Composés d'ammonium quaternaire , Eau , Cyclodextrines bêta/composition chimique , Animaux , Conformation des glucides , Lignée cellulaire , Survie cellulaire/effets des médicaments et des substances chimiques , Préparation de médicamentRÉSUMÉ
To promote transungual permeation of nystatin (NYST), molecule with high molecular weight, no water-soluble, amphoteric by iontophoresis. The synergic effect of the combination of cetylpyridinium chloride, CPC, or polyoxyethylene (20) sorbitan monooleate, TW80, and iontophoresis was investigated. In vitro permeation experiments were carried out through bovine hoof slices using vertical diffusion cells. A low current density (0.2 mA/cm2) was applied by introducing Ag/AgCl electrodes in the donor (anode) and receptor (cathode) chambers. The donor phase consisted of a solution, a suspension, or gel-type vehicles containing NYST and surfactants in pH 5.6 HEPES buffer. The addition of CPC to NYST suspension (SOSP) produced a fivefold increase on the permeability of the bovine hoof membrane to the drug. The application of anodal iontophoresis further improved NYST flux. Conversely, NYST transungual permeation was not influenced by TW80 either in the passive diffusion or iontophoretic flux. Furthermore, the iontophoretic treatment does not appear to induce irreversible alterations to the hoof bovine membranes. The present work demonstrated the efficacy of iontophoresis as a treatment for different nail pathologies with large molecules very slightly soluble in water without irreversibly affecting the nail structure. A synergistic effect between CPC and iontophoresis was observed.
Sujet(s)
Sabot et griffe/effets des médicaments et des substances chimiques , Sabot et griffe/métabolisme , Ionophorèse/méthodes , Nystatine/composition chimique , Nystatine/métabolisme , Administration par voie cutanée , Animaux , Antibactériens/administration et posologie , Antibactériens/composition chimique , Antibactériens/métabolisme , Bovins , Relation dose-effet des médicaments , Excipients/administration et posologie , Excipients/composition chimique , Excipients/métabolisme , Nystatine/administration et posologie , Perméabilité/effets des médicaments et des substances chimiquesRÉSUMÉ
A selective and rapid reversed-phase HPLC-UV method was developed and validated to quantify tavaborole (TAV; AN2690) in biological samples, i.e., in receiving phase and in bovine hoof membrane extract derived from in vitro transungual permeation studies. A simple solid-liquid extraction procedure was used to recover the drug from the bovine hoof slices. TAV chromatographic separation was achieved on a Luna PFP column (150 × 4.6 mm, 5 µm) using a mobile phase consisting of a 70% phosphoric acid solution (10 mM, pH 2.0) with 30% acetonitrile. The detection wavelength was set to 220 nm using a UV detector. The method exhibited good linearity in the calibration ranges, which were 0.5-8.0 and 0.03-2.5 µg/mL for the receiving phase and hoof membranes, respectively. The obtained LOD and LOQ values were 0.023 and 0.069 µg/mL, respectively, for the receiving phase and 0.0024 and 0.007 µg/mL for the bovine hoof membrane extracts. In all cases, the CV for intraday and interday precision was widely below the limit of 2%, demonstrating good precision. The analytical method described was sensitive, precise, linear, and accurate and could be applicable for clinical and bioanalytical studies as an alternative to other analytical methods, which are quite expensive and not always available in research laboratories.