Predicting lung exposure of intramuscular niclosamide as an antiviral agent: Power-law based pharmacokinetic modeling.

Niclosamide, a potent anthelmintic agent, has emerged as a candidate against COVID-19 in recent studies. Its formulation has been investigated extensively to address challenges related to systemic exposure. In this study, niclosamide was formulated as a long-acting intramuscular injection to achieve systemic exposure in the lungs for combating the virus. To establish the dose-exposure relationship, a hamster model was selected, given its utility in previous COVID-19 infection studies. Pharmacokinetic (PK) analysis was performed using NONMEM and PsN. Hamsters were administered doses of 55, 96, 128, and 240 mg/kg with each group comprising five animals. Two types of PK models were developed, linear models incorporating partition coefficients and power-law distributed models, to characterize the relationship between drug concentrations in the plasma and lungs of the hamsters. Numerical and visual diagnostics, including basic goodness-of-fit and visual predictive checks, were employed to assess the models. The power-law-based PK model not only demonstrated superior numerical performance compared with the linear model but also exhibited better agreement in visual diagnostic evaluations. This phenomenon was attributed to the nonlinear relationship between drug concentrations in the plasma and lungs, reflecting kinetic heterogeneity. Dose optimization, based on predicting lung exposure, was conducted iteratively across different drug doses, with the minimum effective dose estimated to be ~1115 mg/kg. The development of a power-law-based PK model proved successful and effectively captured the nonlinearities observed in this study. This method is expected to be applicable for investigating the drug disposition of specific formulations in the lungs.

2D van der Waals Heterostructure with Tellurene Floating-Gate for Wide Range and Multi-Bit Optoelectronic Memory.

Intensive research on optoelectronic memory (OEM) devices based on two-dimensional (2D) van der Waals heterostructures (vdWhs) is being conducted due to their distinctive advantages for electrical-optical writing and multilevel storage. These features make OEM a promising candidate for the logic of reconfigurable operations. However, the realization of nonvolatile OEM with broadband absorption (from visible to infrared) and a high switching ratio remains challenging. Herein, we report a nonvolatile OEM based on a heterostructure consisting of rhenium disulfide (ReS2), hexagonal boron nitride (hBN) and tellurene (2D Te). The 2D Te-based floating-gate (FG) device exhibits excellent performance metrics, including a high switching on/off ratio (∼106), significant endurance (>1000 cycles) and impressive retention (>104 s). In addition, the narrow band gap of 2D Te endows the device with broadband optical programmability from the visible to near-infrared regions at room temperature. Moreover, by applying different gate voltages, light wavelengths, and laser powers, multiple bits can be successfully generated. Additionally, the device is specifically designed to enable reconfigurable inverter logic circuits (including AND and OR gates) through controlled electrical and optical inputs. These significant findings demonstrate that the 2D vdWhs with a 2D Te FG are a valuable approach in the development of high-performance OEM devices.

Nitrogen-Doped CuO@CuS Core-Shell Structure for Highly Efficient Catalytic OER Application.

Water electrolysis is a highly efficient route to produce ideally clean H2 fuel with excellent energy conversion efficiency and high gravimetric energy density, without producing carbon traces, unlike steam methane reforming, and it resolves the issues of environmental contamination via replacing the conventional fossil fuel. Particular importance lies in the advancement of highly effective non-precious catalysts for the oxygen evolution reaction (OER). The electrocatalytic activity of an active catalyst mainly depends on the material conductivity, accessible catalytically active sites, and intrinsic OER reaction kinetics, which can be tuned via introducing N heteroatoms in the catalyst structure. Herein, the efficacious nitrogenation of CuS was accomplished, synthesized using a hydrothermal procedure, and characterized for its electrocatalytic activity towards OER. The nitrogen-doped CuO@CuS (N,CuO@CuS) electrocatalyst exhibited superior OER activity compared to pristine CuS (268 and 602 mV), achieving a low overpotential of 240 and 392 mV at a current density of 10 and 100 mA/cm2, respectively, ascribed to the favorable electronic structural modification triggered by nitrogen incorporation. The N,CuO@CuS also exhibits excellent endurance under varied current rates and a static potential response over 25 h with stability measured at 10 and 100 mA/cm2.

Precursor silanization assisted synthesis and optical tuning of dual-phase perovskite nanocrystals embedded in silica matrix with high environmental stability.

Ligand-assisted re-precipitation (LARP) is one of the most practicing techniques for synthesizing colloidal nanocrystals (NCs). But due to its fast reaction kinetics, it offers limited synthesis control. In the present study, we report a novel, precursor silanization-based room temperature technique unveiling slow crystallization of Cs4PbBr6/CsPbBr3 dual-phase nanocrystals (DPNCs) protected with a dense silica cloud-like matrix. Unlike conventional LARP, we can observe the tuneable optical bandgap of the DPNCs as a function of reaction time because of the slow reaction kinetics. The as-synthesized DPNCs exhibit a high photoluminescence quantum yield (PLQY) of 76% with ultrahigh stability while retaining âˆ¼ 100% of their initial PLQY in an ambient environment with a relative humidity of 55% for more than 1 year. DPNCs demonstrates ambient photostability of 560 h, and water stability of 25 days. This interesting precursor silanization technique developed here can be extended for the synthesis of other nanomaterials.

rGO functionalized (Ni,Fe)-OH for an efficient trifunctional catalyst in low-cost hydrogen generation via urea decomposition as a proxy anodic reaction.

Green hydrogen derived from the water-electrolysis route is emerging as a game changer for achieving global carbon neutrality. Economically producing hydrogen through water electrolysis, however, requires the development of low-cost and highly efficient electrocatalysts via scalable synthetic strategies. Herein, this work reports a simple and scalable immersion synthetic strategy to deposit reduced graphene oxide (rGO) nanosheets integrated with Ni-Fe-based hydroxide nanocatalysts on nickel foam (NF) at room temperature. As a result of synergetic interactions among the hydroxides, rGO and NF, enhanced catalytic sites with improved charge transport between the electrode and electrolyte were perceived, resulting in significantly enhanced oxygen evolution reaction (OER) activity with low overpotentials of 270 and 320 mV at 100 and 500 mA cm-2, respectively, in a 1.0 M KOH aqueous electrolyte. This performance is superior to those of the hydroxide-based electrode without incorporating rGO and the IrO2-benchmark electrode. Furthermore, when the conventional OER is substituted with urea decomposition (UOR) as a proxy anodic reaction, the electrolyzer achieves 100 and 500 mA cm-2 at a lower potential by 150 and 120 mV, respectively than the OER counterpart without influencing the hydrogen evolution reaction (HER) activity at the cathode. Notably, the rGO-incorporated electrode delivers a spectacularly high UOR current density of 1600 mA cm-2 at 1.53 V vs. RHE, indicating the decomposition of urea at an outstandingly high rate.

Experimental and Theoretical Insights into the Borohydride-Based Reduction-Induced Metal Interdiffusion in Fe-Oxide@NiCo2O4 for Enhanced Oxygen Evolution.

The oxygen evolution reaction (OER) plays a key role in determining the performance of overall water splitting, while a core technological consideration is the development of cost-effective, efficient, and durable catalysts. Here, we demonstrate a robust reduced Fe-oxide@NiCo2O4 bilayered non-precious-metal oxide composite as a highly efficient OER catalyst in an alkaline medium. A bilayered oxide composite film with an interconnected nanoflake morphology (Fe2O3@NiCo2O4) is reduced in an aqueous NaBH4 solution, which results in a mosslike Fe3O4@NiCo2O4 (reduced Fe-oxide@NiCo2O4; rFNCO) nanostructured film with an enhanced electrochemical surface area. The rFNCO film demonstrates an outstanding OER activity with an extraordinary low overpotential of 189 mV at 10 mA cm-2 (246 mV at 100 mA cm-2) and a remarkably small Tafel slope of 32 mV dec-1. The film also shows excellent durability for more than 50 h of continuous operation, even at 100 mA cm-2. Furthermore, density functional theory calculations suggest that the unintentionally in situ doped Ni during the reduction reaction possibly improves the OER performance of the rFNCO catalyst shifting d-band centers of both Fe and Ni active sites.

Ecofriendly, selective removal of radioactive strontium ions in aqueous solutions using magnetic banana peels.

Radionuclide Sr2+ in aqueous solution was removed using a large amount of banana peel (BP). Magnetized BP, mag@BP, was synthesized for recovery after the adsorption process. The synthesis was a very simple process of precipitation of BP with a magnetic substance. The synthesized adsorbent was thoroughly examined by performing Fourier-transform infrared spectroscopy, scanning electron microscopy, X-ray diffraction analysis, and vibration sample magnetometer analysis. Moreover, mag@BP has a Sr2+ maximum adsorption capacity of 23.827 mg/g according to isothermal adsorption, which is the best fit for the Langmuir isotherm model. In the pH effect experiment, the highest Sr2+ adsorption capacity was found at pH 9, and it has a spontaneous adsorption mechanism through experiments on temperature, time, and selectivity, and it reaches adsorption equilibrium within a short time and has high selectivity through competitive adsorption with Na+. In addition, an adsorption mechanism accompanied by ion exchange with K+ on the surface of BP, bonding with various functional groups, and electrical attraction were established. Therefore, mag@BP is suitable for use an environmentally friendly, low cost, and recoverable adsorbent for magnetic removal of Sr2+ from aqueous solutions. Further, unlike other carbon-based adsorbents, it does not cause cytotoxicity.

Hybridisation of perovskite nanocrystals with organic molecules for highly efficient liquid scintillators.

Compared with solid scintillators, liquid scintillators have limited capability in dosimetry and radiography due to their relatively low light yields. Here, we report a new generation of highly efficient and low-cost liquid scintillators constructed by surface hybridisation of colloidal metal halide perovskite CsPbA3 (A: Cl, Br, I) nanocrystals (NCs) with organic molecules (2,5-diphenyloxazole). The hybrid liquid scintillators, compared to state-of-the-art CsI and Gd2O2S, demonstrate markedly highly competitive radioluminescence quantum yields under X-ray irradiation typically employed in diagnosis and treatment. Experimental and theoretical analyses suggest that the enhanced quantum yield is associated with X-ray photon-induced charge transfer from the organic molecules to the NCs. High-resolution X-ray imaging is demonstrated using a hybrid CsPbBr3 NC-based liquid scintillator. The novel X-ray scintillation mechanism in our hybrid scintillators could be extended to enhance the quantum yield of various types of scintillators, enabling low-dose radiation detection in various fields, including fundamental science and imaging.

Two-Dimensional Layered Hydroxide Nanoporous Nanohybrids Pillared with Zero-Dimensional Polyoxovanadate Nanoclusters for Enhanced Water Oxidation Catalysis.

The oxygen-evolution reaction (OER) is critical in electrochemical water splitting and requires an efficient, sustainable, and cheap catalyst for successful practical applications. A common development strategy for OER catalysts is to search for facile routes for the synthesis of new catalytic materials with optimized chemical compositions and structures. Here, nickel hydroxide Ni(OH)2 2D nanosheets pillared with 0D polyoxovanadate (POV) nanoclusters as an OER catalyst that can operate in alkaline media are reported. The intercalation of POV nanoclusters into Ni(OH)2 induces the formation of a nanoporous layer-by-layer stacking architecture of 2D Ni(OH)2 nanosheets and 0D POV with a tunable chemical composition. The nanohybrid catalysts remarkably enhance the OER activity of pristine Ni(OH)2 . The present findings demonstrate that the intercalation of 0D POV nanoclusters into Ni(OH)2 is effective for improving water oxidation catalysis and represents a potential method to synthesize novel, porous hydroxide-based nanohybrid materials with superior electrochemical activities.

Self-Assembled Nanostructured CuCo2 O4 for Electrochemical Energy Storage and the Oxygen Evolution Reaction via Morphology Engineering.

CuCo2 O4 films with different morphologies of either mesoporous nanosheets, cubic, compact-granular, or agglomerated embossing structures are fabricated via a hydrothermal growth technique using various solvents, and their bifunctional activities, electrochemical energy storage and oxygen evolution reaction (OER) for water splitting catalysis in strong alkaline KOH media, are investigated. It is observed that the solvents play an important role in setting the surface morphology and size of the crystallites by controlling nucleation and growth rate. An optimized mesoporous CuCo2 O4 nanosheet electrode shows a high specific capacitance of 1658 F g-1 at 1 A g-1 with excellent restoring capability of ≈99% at 2 A g-1 and superior energy density of 132.64 Wh kg-1 at a power density of 0.72 kW kg-1 . The CuCo2 O4 electrode also exhibits excellent endurance performance with capacity retention of 90% and coulombic efficiency of ≈99% after 5000 charge/discharge cycles. The best OER activity is obtained from the CuCo2 O4 nanosheet sample with the lowest overpotential of ≈290 mV at 20 mA cm-2 and a Tafel slope of 117 mV dec-1 . The superior bifunctional electrochemical activity of the mesoporous CuCo2 O4 nanosheet is a result of electrochemically favorable 2D morphology, which leads to the formation of a very large electrochemically active surface area.

Direct growth of 2D nickel hydroxide nanosheets intercalated with polyoxovanadate anions as a binder-free supercapacitor electrode.

A mesoporous nanoplate network of two-dimensional (2D) layered nickel hydroxide Ni(OH)2 intercalated with polyoxovanadate anions (Ni(OH)2-POV) was built using a chemical solution deposition method. This approach will provide high flexibility for controlling the chemical composition and the pore structure of the resulting Ni(OH)2-POV nanohybrids. The layer-by-layer ordered growth of the Ni(OH)2-POV is demonstrated by powder X-ray diffraction and cross-sectional high-resolution transmission electron microscopy. The random growth of the intercalated Ni(OH)2-POV nanohybrids leads to the formation of an interconnected network morphology with a highly porous stacking structure whose porosity is controlled by changing the ratio of Ni(OH)2 and POV. The lateral size and thickness of the Ni(OH)2-POV nanoplates are ∼400 nm and from ∼5 nm to 7 nm, respectively. The obtained thin films are highly active electrochemical capacitor electrodes with a maximum specific capacity of 1440 F g-1 at a current density of 1 A g-1, and they withstand up to 2000 cycles with a capacity retention of 85%. The superior electrochemical performance of the Ni(OH)2-POV nanohybrids is attributed to the expanded mesoporous surface area and the intercalation of the POV anions. The experimental findings highlight the outstanding electrochemical functionality of the 2D Ni(OH)2-POV nanoplate network that will provide a facile route for the synthesis of low-dimensional hybrid nanomaterials for a highly active supercapacitor electrode.

Effects of Extremely Low Frequency Electromagnetic Fields on Melanogenesis through p-ERK and p-SAPK/JNK Pathways in Human Melanocytes.

This study evaluated frequency-dependent effects of extremely low frequency electromagnetic fields (ELF-EMFs) on melanogenesis by melanocytes in vitro. Melanocytes were exposed to 2 mT EMFs at 30-75 Hz for 3 days before melanogenesis was examined. Exposure to ELF-EMFs at 50 and 60 Hz induced melanogenic maturation without cell damage, without changing cell proliferation and mitochondrial activity. Melanin content and tyrosinase activity of cells exposed to 50 Hz were higher than in controls, and mRNA expression of tyrosinase-related protein-2 was elevated relative to controls at 50 Hz. Phosphorylated cyclic adenosine monophosphate response element-binding protein (p-CREB) levels were higher than controls in cells exposed to ELF-EMFs at 50-75 Hz. Immunohistochemical staining showed that melanocyte-specific markers (HMB45, Melan-A) were strongly expressed in cells exposed to EMFs at 50 and 60 Hz compared to controls. Thus, exposure to ELF-EMFs at 50 Hz could stimulate melanogenesis in melanocytes, through activation of p-CREB and p-p38 and inhibition of phosphorylated extracellular signal-regulated protein kinase and phosphorylated stress-activated protein kinase/c-Jun N-terminal kinase. The results may form the basis of an appropriate anti-gray hair treatment or be applied in a therapeutic device for inducing repigmentation in the skin of vitiligo patients.

Dataset on electro-optically tunable smart-supercapacitors based on oxygen-excess nanograin tungsten oxide thin film.

The dataset presented here is related to the research article entitled "Highly Efficient Electro-optically Tunable Smart-supercapacitors Using an Oxygen-excess Nanograin Tungsten Oxide Thin Film" (Akbar et al., 2017) [9] where we have presented a nanograin WO3 film as a bifunctional electrode for smart supercapacitor devices. In this article we provide additional information concerning nanograin tungsten oxide thin films such as atomic force microscopy, Raman spectroscopy, and X-ray diffraction spectroscopy. Moreover, their electrochemical properties such as cyclic voltammetry, electrochemical supercapacitor properties, and electrochromic properties including coloration efficiency, optical modulation and electrochemical impedance spectroscopy are presented.

The effect of ultrasound for increasing neural differentiation in hBM-MSCs and inducing neurogenesis in ischemic stroke model.

AIMS: This study's purpose was to evaluate the effect of ultrasound in air at a frequency of 0.04MHz and an intensity of 50mW/cm2 on neural differentiation of hBM-MSCs in vitro and on neurogenesis in an ischemic stroke model. MATERIALS AND METHODS: hBM-MSCs were exposed to 0.04MHz ultrasound and then compared with no exposed one in cell morphology, lactate dehydrogenase (LDH) activity, RT-PCR, and Western blot. In addition, we made stroke model mice by means of the photothrombosis (PT) method and these models were exposed to 0.04MHz ultrasound after hBM-MSCs injection. We compared with sham group in histological and immunohistochemical analysis and western blot. KEY FINDINGS: Ultrasound induced neural differentiation without cell death. In stroke models, inflammatory cells were observed around the infarct area in the Cell, Cell/Ultrasound group and the brain infarct volume in the Cell/Ultrasound group was smaller than in the sham group. Further, the expression of neural proteins in the Cell/Ultrasound group was increased relative to the sham group. SIGNIFICANCE: The present study showed that ultrasound promotes neural differentiation of hBM-MSC and neurogenesis in a mouse stroke model. This may be applicable as a therapeutic device with the aim of inducing neurogenesis following stroke.

The activation of melanogenesis by p-CREB and MITF signaling with extremely low-frequency electromagnetic fields on B16F10 melanoma.

Melanin in the skin determines the skin color, and decreased melanin causes many hypopigmentation disorders and increased damage to skin by ultraviolet B (UVB) light irradiation. Here, we stimulate melanogenesis in B16F10 melanoma cells by using specific frequencies of ELF-EMFs. In this study, we focus on the melanogenesis of EMF-ELFs and find that 60-75Hz ELF-EMFs upregulate melanin synthesis by stimulated expression of tyrosinase and TRP-1 through inhibition of phosphorylation ERK, activation of CREB, and MITF up-regulation in B16F10 melanoma cells. The results show that 60-75Hz ELF-EMFs significantly increase secreted melanin, cellular melanin content, and tyrosinase activity, and the cell mitochondria activity, cell viability, and cell membrane condition are unchanged. Furthermore, the protein expression level of MITF and p-CREB signaling pathway are significantly increased. Moreover, 60Hz ELF-EMFs reduce the phosphorylate of ERK in B16F10 melanoma cells. These findings indicate that stimulation of melanogenesis by using ELF-EMFs has therapeutic potential for treating hypopigmentation disorders such as vitiligo.

Switching Power Universality in Unipolar Resistive Switching Memories.

We investigate the resistive switching power from unipolar resistive switching current-voltage characteristics in various binary metal oxide films sandwiched by different metal electrodes, and find a universal feature (the so-called universality) in the switching power among these devices. To experimentally derive the switching power universality, systematic measurements of the switching voltage and current are performed, and neither of these correlate with one another. As the switching resistance (R) increases, the switching power (P) decreases following a power law P ∝ R(-ß), regardless of the device configurations. The observed switching power universality is indicative of the existence of a commonly applicable switching mechanism. The origin of the power universality is discussed based on a metallic filament model and thermo-chemical reaction.

Effect of Electronegativity on Bipolar Resistive Switching in a WO3-Based Asymmetric Capacitor Structure.

This study investigates the transport and switching time of nonvolatile tungsten oxide based resistive-switching (RS) memory devices. These devices consist of a highly resistive tungsten oxide film sandwiched between metal electrodes, and their RS characteristics are bipolar in the counterclockwise direction. The switching voltage, retention, endurance, and switching time are strongly dependent on the type of electrodes used, and we also find quantitative and qualitative evidence that the electronegativity (χ) of the electrodes plays a key role in determining the RS properties and switching time. We also propose an RS model based on the role of the electronegativity at the interface.

Multi-functional reactively-sputtered copper oxide electrodes for supercapacitor and electro-catalyst in direct methanol fuel cell applications.

This work reports on the concurrent electrochemical energy storage and conversion characteristics of granular copper oxide electrode films prepared using reactive radio-frequency magnetron sputtering at room temperature under different oxygen environments. The obtained films are characterized in terms of their structural, morphological, and compositional properties. X-ray diffraction, X-ray photoelectron spectroscopy and scanning electron microscope studies reveal that granular, single-phase Cu2O and CuO can be obtained by controlling the oxygen flow rate. The electrochemical energy storage properties of the films are investigated by carrying out cyclic voltammetry, galvanostatic charge/discharge and electrochemical impedance spectroscopy tests. The electrochemical analysis reveals that the Cu2O and CuO electrodes have high specific capacitances of 215 and 272 F/g in 6 M KOH solution with a capacity retention of about 80% and 85% after 3000 cycles, respectively. Cyclic voltammetry and chronoamperometry are used to study the electrochemical energy conversion properties of the films via methanol electro-oxidation. The results show that the Cu2O and CuO electrodes are electro-catalytically active and highly stable.

Pigmentation effect of electromagnetic fields at various intensities to melanocytes.

Melanogenesis is the biological process that results in the synthesis of skin pigment of melanin and it has various functions in living systems and is synthesized by the melanosome within the melanocytes. A variety of physical treatments are used to promote melanin production in the melanocytes for pigmentation control. The purpose of this study was to evaluate the intensity-dependent effect of extremely low-frequency electromagnetic fields (ELF-EMFs) on melanogenesis by melanocytes in vitro. Melanocytes were exposed to ELF-EMFs at a frequency of 50 Hz and at intensities in the range of 0.5-20 G over 4 days. The results of lactate dehydrogenase assay showed that there were no significant differences between cells exposed to 0.5 G or 2 G groups and the controls. The melanin contents increased 1.2-1.5-fold in cells exposed to ELF-EMFs and tyrosinase activity increased 1.3-fold in cells exposed to ELF-EMFs, relative to the controls. Also, exposure to ELF-EMFs was associated with activation in cyclic-AMP response element binding protein and microphthalmia-associated transcription factor (MITF) was up-regulated. Up-regulation of MITF induces the expression of melanogenesis-related markers, such as tyrosinase, tyrosinase-related protein (TRP)-1, TRP-2. In conclusion, the present study showed that the exposure to ELF-EMFs at low intensities can stimulate melanogenesis in melanocyte, and these results may be used to a therapeutic devices for inducing repigmentation in vitiligo patients.