RÉSUMÉ
Compartmentalization and binding-triggered conformational change regulate many metabolic processes in living matter. Here, we have synergistically combined these two biorelevant processes to tune the Diels-Alder (DA) reactivity of a synthetic self-complexing host-guest molecular switch CBPQT4+ -Fu, consisting of an electron-rich furan unit covalently attached to the electron-deficient cyclobis(paraquat-p-phenylene) tetrachloride (CBPQT4+ , 4Cl- ) host. This design allows CBPQT4+ -Fu to efficiently compartmentalize the furan ring inside its host cavity in water, thereby protecting it from the DA reaction with maleimide. Remarkably, the self-complexed CBPQT4+ -Fu can undergo a conformational change through intramolecular decomplexation upon the addition of a stronger binding molecular naphthalene derivative as a competitive guest, triggering the DA reaction upon addition of a chemical regulator. Remarkably, connecting the guest to a thermoresponsive lower critical solution temperature (LCST) copolymer regulator controls the DA reaction on command upon heating and cooling the reaction media beyond and below the cloud point temperature of the copolymer, representing a rare example of decreased reactivity upon increasing temperature. Altogether, this work opens up new avenues towards combined topological and supramolecular control over reactivity in synthetic constructs, enabling control over reactivity through molecular regulators or even mild temperature variations.
RÉSUMÉ
Good selective contacts are necessary for solar cells that are efficient and have long-term stability. Since 1998, with the advent of solid-state dye sensitized solar cells (DSSC), Spiro-OMeTAD has become the reference hole-transporting material. Yet, for efficient solar cells Spiro-OMeTAD must be partially oxidized with chemical dopants, which compromises the long-term stability of the solar cell. Alternatively, semiconductor polymers such as PTAA have been also studied, matching or improving the solar cell characteristics. However, PTAA-based devices lack long-term stability. Moreover, both Spiro-OMeTAD and PTAA are expensive materials to synthesize. Hence, approaches toward increasing the solar cell stability without compromising the device efficiency and decreasing the manufacturing cost are very desirable. In this work we have modified Spiro-OMeTAD, by an easy-to-use methodology, by introducing a carboxylic acid anchoring group (Spiro-Acid), thereby allowing the formation of self-assembled monolayers (SAMs) of the hole-transporting material in dopant-free p-i-n hybrid perovskite solar cells (iPSCs). The resulting device showed a champion efficiency of 18.15% with ultralow energy loss, which is the highest efficiency among Spiro-OMeTAD-based iPSCs, and a remarkable fill factor of over 82%, as well as excellent long-term illumination stability. Charge transfer and charge carrier dynamics are studied by using advanced transient techniques to understand the interfacial kinetics. Our results demonstrate that the Spiro-OMeTAD-based SAMs have a great potential in producing low-cost iPSC devices, due to lower material usage, good long-term stability, and high performance.
RÉSUMÉ
A new flavin-based gelator is reported which forms micellar structures at high pH and gels at low pH. This flavin can be used for the photooxidation of thiols under visible light, with the catalytic efficiency being linked to the self-assembled structures present.
Sujet(s)
Flavines , Lumière , Catalyse , Flavines/composition chimique , Gels/composition chimique , Composés chimiques organiques , OxydoréductionRÉSUMÉ
With the increased application of batteries in powering electric vehicles as well as potential contributions to utility-scale storage, there remains a need to identify and develop efficient and sustainable active materials for use in lithium (Li)- and sodium (Na)-ion batteries. Organic cathode materials provide a desirable alternative to inorganic counterparts, which often come with harmful environmental impact and supply chain uncertainties. Organic materials afford a sustainable route to active electrodes that also enable fine-tuning of electrochemical potentials through structural design. Here, we report a bis-anthraquinone-functionalized s-indacene-1,3,5,7(2H,6H)-tetraone (BAQIT) synthesized using a facile and inexpensive route as a high-capacity cathode material for use in Li- and Na-ion batteries. BAQIT provides multiple binding sites for Li- and Na-ions, while maintaining low solubility in commercial organic electrolytes. Electrochemical Li-ion cells demonstrate excellent stability with discharge capacities above 190 mAh g-1 after 300 cycles at a 0.1C rate. The material also displayed excellent high-rate performance with a reversible capacity of 142 mAh g-1 achieved at a 10C rate. This material affords high power capabilities superior to current state-of-the-art organic cathode materials, with values reaching 5.09 kW kg-1. The Na-ion performance was also evaluated, exhibiting reversible capacities of 130 mAh g-1 after 90 cycles at a 0.1C rate. This work offers a structural design to encourage versatile, high-power, and long cycle-life electrochemical energy-storage materials.
RÉSUMÉ
Chiral biological and pharmaceutical molecules are analyzed with phenomena that monitor their very weak differential interaction with circularly polarized light. This inherent weakness results in detection levels for chiral molecules that are inferior, by at least six orders of magnitude, to the single molecule level achieved by state-of-the-art chirally insensitive spectroscopic measurements. Here, we show a phenomenon based on chiral quantum metamaterials (CQMs) that overcomes these intrinsic limits. Specifically, the emission from a quantum emitter, a semiconductor quantum dot (QD), selectively placed in a chiral nanocavity is strongly perturbed when individual biomolecules (here, antibodies) are introduced into the cavity. The effect is extremely sensitive, with six molecules per nanocavity being easily detected. The phenomenon is attributed to the CQM being responsive to significant local changes in the optical density of states caused by the introduction of the biomolecule into the cavity. These local changes in the metamaterial electromagnetic environment, and hence the biomolecules, are invisible to "classical" light-scattering-based measurements. Given the extremely large effects reported, our work presages next generation technologies for rapid hypersensitive measurements with applications in nanometrology and biodetection.
Sujet(s)
Préparations pharmaceutiques , Boîtes quantiques , Nanotechnologie , Semiconducteurs , StéréoisomérieRÉSUMÉ
Organic-based electrodes for Li- and Na-ion batteries present attractive alternatives to commonly applied inorganic counterparts which can often carry with them supply-chain risks, safety concerns with thermal runaway, and adverse environmental impact. The ability to chemically direct the structure of organic electrodes through control over functional groups is of particular importance, as this provides a route to fine-tune electrochemical performance parameters. Here, we report two benzo-dipteridine derivatives, BF-Me2 and BF-H2 , as high-capacity electrodes for use in Li- and Na-ion batteries. These moieties permit binding of multiple Li-ions per molecule while simultaneously ensuring low solubility in the supporting electrolyte, often a precluding issue with organic electrodes. Both display excellent electrochemical stability, with discharge capacities of 142 and 182 mAh g-1 after 100 cycles at a C/10 rate and Coulombic efficiencies of 96% and â¼ 100% demonstrated for BF-Me2 and BF-H2 , respectively. The application of a Na-ion cell has also been demonstrated, showing discharge capacities of 88.8 and 137 mAh g-1 after 100 cycles at a C/2 rate for BF-Me2 and BF-H2 , respectively. This work provides an encouraging precedent for these and related structures to provide versatile, high-energy density, and long cycle-life electrochemical energy storage materials.
RÉSUMÉ
Coplanar metal-free organic dyes featuring a furylethynyl spacer with different donor residues (MeO-, MeS-, and Me2N-) have been synthesized. Density functional theory (DFT) calculations predicted that the Me2N- residue would facilitate more effective charge transfer from donor to acceptor than the MeO- and MeS- residues. In agreement with DFT calculations, the dye-sensitized solar cells (DSSCs) fabricated with the Me2N- functionalized dye exhibited the best power conversion efficiency (η), 2.88%. Furthermore, the effect of the furan spacer on the photophysical properties and DSSC parameters are discussed in comparison to a previously reported thiophene counterpart.
RÉSUMÉ
The study of small donor molecules as the active component of organic solar cells continues to attract considerable attention due to the range of advantages these molecules have over their polymeric counterparts. Here we report the synthesis and solar cell fabrication of three BODIPY small molecule donors. Two of the dyes feature triphenylamine and phenothiazine as donor units attached to the meso and α-positions of the BODIPY core (TPA-PTZ-DBP and PTZ-TPA-BDP). Additionally, we have synthesised a push-pull derivative featuring phenothiazine moieties in the α-positions and a nitrobenzene in the meso-position (N-TPA-BDP) in order to investigate what effect this type of functionalisation has on the photovoltaic properties compared to the other dyes. The optoelectronic properties were investigated and the dyes showed broad absorption in the near-infrared with high extinction coefficients. Electrochemical measurements indicated good reversibility for the dyes redox processes. In contrast with the all-donor functionalised systems, N-TPA-BDP demonstrated extensive HOMO-LUMO overlap by DFT. The dyes were investigated as donor molecules in bulk heterojunction solar cells along with PC71BM, and under optimal donor to acceptor ratio PTZ-TPA-BDP showed the highest PCE of 1.62%. N-PTZ-BDP:PC71BM was the only blend to further improve upon thermal annealing reaching the highest conversion efficiency among the dyes of 1.71%. A morphology comprised of finely mixed donor and acceptor components is observed for BHJ blends of each of the three donors at their optimum fullerene content. Upon thermal annealing, these morphological features remain mostly the same for PTZ-TPA-BDP:PC71BM and TPA-PTZ-DBP:PC71BM blends whereas for N-PTZ-BDP:PC71BM the domains show a larger size. These dyes show that phenothiazine functionalisation of BODIPY is useful for solar cells because it gives strong and broad absorption extending to the near infra-red and materials with reversible redox properties - both of which are desirable for organic solar cells.
RÉSUMÉ
Additives play an important role in modifying the morphology and phase separation of donor and acceptor molecules in bulk heterojunction (BHJ) solar cells. Here, we report triptycene (TPC) as a small-molecule additive for supramolecular control of phase separation and concomitant improvement of the power conversion efficiency (PCE) of PTB7 donor and fullerene acceptor-based BHJ polymer solar cells. An overall 60% improvement in PCE is observed for both PTB7:PC61BM and PTB7:PC71BM blends. The improved photovoltaic (PV) performance can be attributed to three factors: (a) TPC-induced supramolecular interactions with donor:acceptor components in the blends to realize a nanoscale phase-separated morphology; (b) an increase in the charge transfer state energy that lowers the driving force for electron transfer from donor to acceptor molecules; and (c) an increase in the charge carrier mobility. An improvement in efficiency using TPC as a supramolecular additive has also been demonstrated for other BHJ blends such as PBDB-T:PC71BM and P3HT:PCBM, implying the wide applicability of this new additive molecule. A comparison of the photostability of TPC as an additive for PTB7:PCBM solar cells to that of the widely used 1,8-diiodooctane additive shows â¼30% higher retention of PV performance for the TPC-added solar cells after 34 h of AM 1.5G illumination. The results obtained suggest that the approach of using additives that can promote supramolecular interactions to modify the length scale of phase separation between donor and acceptor is very promising and can lead to the development of highly efficient and stable organic photovoltaics.
RÉSUMÉ
The structural order of biopolymers, such as proteins, at interfaces defines the physical and chemical interactions of biological systems with their surroundings and is hence a critical parameter in a range of biological problems. Known spectroscopic methods for routine rapid monitoring of structural order in biolayers are generally only applied to model single-component systems that possess a spectral fingerprint which is highly sensitive to orientation. This spectroscopic behavior is not a generic property and may require the addition of a label. Importantly, such techniques cannot readily be applied to real multicomponent biolayers, have ill-defined or unknown compositions, and have complex spectroscopic signatures with many overlapping bands. Here, we demonstrate the sensitivity of plasmonic fields with enhanced chirality, a property referred to as superchirality, to global orientational order within both simple model and "real" complex protein layers. The sensitivity to structural order is derived from the capability of superchiral fields to detect the anisotropic nature of electric dipole-magnetic dipole response of the layer; this is validated by numerical simulations. As a model study, the evolution of orientational order with increasing surface density in layers of the antibody immunoglobulin G was monitored. As an exemplar of greater complexity, superchiral fields are demonstrated, without knowledge of exact composition, to be able to monitor how qualitative changes in composition alter the structural order of protein layers formed from blood serum, thereby establishing the efficacy of the phenomenon as a tool for studying complex biological interfaces.
Sujet(s)
Protéines du sang/composition chimique , Nanostructures/composition chimique , Adsorption , Or/composition chimique , Humains , Immunoglobuline G/composition chimique , Modèles moléculaires , Ciment carboxylate/composition chimique , Analyse spectraleRÉSUMÉ
Dye-sensitized solar cells (DSSCs) continue to attract interest due to their lower cost production compared to silicon based solar cells and their improving power conversion efficiencies. Porphyrin-based sensitizers have become an important sub-class due to their strong absorption characteristics in the visible region, convenient modulation of properties through synthetic manipulation and class-leading power conversion efficiencies. In this article, we report the synthesis and characterization of two porphyrin-based dyes and their application as sensitizers in DSSCs. A thiophene and a furan moiety have been incorporated into the push-pull architecture as a π-bridge, allowing the systematic investigation of how these moieties influence the physical properties of the dyes and the performance of their resulting DSSCs. A significant difference in PCEs has been observed, with the furan containing dye (PorF, PCE = 4.5%) being more efficient than the thiophene-based analogue (PorT, PCE = 3.6%) in conjunction with the iodide/triiodide redox electrolyte.
RÉSUMÉ
The structure adopted by biomaterials, such as proteins, at interfaces is a crucial parameter in a range of important biological problems. It is a critical property in defining the functionality of cell/bacterial membranes and biofilms (i.e., in antibiotic-resistant infections) and the exploitation of immobilized enzymes in biocatalysis. The intrinsically small quantities of materials at interfaces precludes the application of conventional spectroscopic phenomena routinely used for (bio)structural analysis due to a lack of sensitivity. We show that the interaction of proteins with superchiral fields induces asymmetric changes in retardation phase effects of excited bright and dark modes of a chiral plasmonic nanostructure. Phase retardations are obtained by a simple procedure, which involves fitting the line shape of resonances in the reflectance spectra. These interference effects provide fingerprints that are an incisive probe of the structure of interfacial biomolecules. Using these fingerprints, layers composed of structurally related proteins with differing geometries can be discriminated. Thus, we demonstrate a powerful tool for the bioanalytical toolbox.
Sujet(s)
Nanostructures/composition chimique , Protéines/composition chimique , Silicium/composition chimique , Imagerie optique , Conformation des protéinesRÉSUMÉ
Supramolecular polymer networks have been designed on the basis of a π-electron donor/acceptor complex: naphthalene (N)/cyclobis(paraquat-p-phenylene) (CBPQT4+ = B). For this purpose, a copolymer of N,N-dimethylacrylamide P(DMA-N1), lightly decorated with 1 mol% of naphthalene pendant groups, has been studied in semi-dilute un-entangled solution in the presence of di-CBPQT4+ (BB) crosslinker type molecules. While calorimetric experiments demonstrate the quantitative binding between N and B groups up to 60 °C, the introduction of BB crosslinkers into the polymer solution gives rise to gel formation above the overlap concentration. From a comprehensive investigation of viscoelastic properties, performed at different concentrations, host/guest stoichiometric ratios and temperatures, the supramolecular hydrogels are shown to follow a Maxwellian behavior with a strong correlation of the plateau modulus and the relaxation time with the effective amount of interchain cross-linkers and their dissociation dynamics, respectively. The calculation of the dissociation rate constant of the supramolecular complex, by extrapolation of the relaxation time of the network back to the beginning of the gel regime, is discussed in the framework of theoretical and experimental works on associating polymers.
RÉSUMÉ
Singlet exciton diffusion was studied in the efficient organic photovoltaic electron donor material DTS(FBTTh2)2. Three complementary time-resolved fluorescence measurements were performed: quenching in planar heterojunctions with an electron acceptor, exciton-exciton annihilation, and fluorescence depolarization. The average exciton diffusivity increases upon annealing from 1.6 × 10-3 to 3.6 × 10-3 cm2 s-1, resulting in an enhancement of the mean two-dimensional exciton diffusion length (LD = (4Dτ)1/2) from 15 to 27 nm. About 30% of the excitons get trapped very quickly in as-cast films. The high exciton diffusion coefficient of the material leads to it being able to harvest excitons efficiently from large donor domains in bulk heterojunctions.
RÉSUMÉ
Most polymeric thermoresponsive hydrogels contract upon heating beyond the lower critical solution temperature (LCST) of the polymers used. Herein, we report a supramolecular hydrogel system that shows the opposite temperature dependence. When the non-thermosesponsive hydrogel NaphtGel, containing dialkoxynaphthalene guest molecules, becomes complexed with the tetra cationic macrocyclic host CBPQT4+ , swelling occurred as a result of host-guest complex formation leading to charge repulsion between the host units, as well as an osmotic contribution of chloride counter-ions embedded in the network. The immersion of NaphtGel in a solution of poly(N-isopropylacrylamide) with tetrathiafulvalene (TTF) end groups complexed with CBPQT4+ induced positive thermoresponsive behaviour. The LCST-induced dethreading of the polymer-based pseudorotaxane upon heating led to transfer of the CBPQT4+ host and a concomitant swelling of NaphtGel. Subsequent cooling led to reformation of the TTF-based host-guest complexes in solution and contraction of the hydrogel.
RÉSUMÉ
The refractive index sensitivity of plasmonic fields has been exploited for over 20 years in analytical technologies. While this sensitivity can be used to achieve attomole detection levels, they are in essence binary measurements that sense the presence/absence of a predetermined analyte. Using plasmonic fields, not to sense effective refractive indices but to provide more "granular" information about the structural characteristics of a medium, provides a more information rich output, which affords opportunities to create new powerful and flexible sensing technologies not limited by the need to synthesize chemical recognition elements. Here we report a new plasmonic phenomenon that is sensitive to the biomacromolecular structure without relying on measuring effective refractive indices. Chiral biomaterials mediate the hybridization of electric and magnetic modes of a chiral solid-inverse plasmonic structure, resulting in a measurable change in both reflectivity and chiroptical properties. The phenomenon originates from the electric-dipole-magnetic-dipole response of the biomaterial and is hence sensitive to biomacromolecular secondary structure providing unique fingerprints of α-helical, ß-sheet, and disordered motifs. The phenomenon can be observed for subchiral plasmonic fields (i.e., fields with a lower chiral asymmetry than circularly polarized light) hence lifting constraints to engineer structures that produce fields with enhanced chirality, thus providing greater flexibility in nanostructure design. To demonstrate the efficacy of the phenomenon, we have detected and characterized picogram quantities of simple model helical biopolymers and more complex real proteins.
Sujet(s)
Nanostructures , Protéines/composition chimique , Réfractométrie , Concanavaline A , Électricité , Conformation des protéines , Sérumalbumine bovineRÉSUMÉ
Chemical redox reactions have been exploited to transform unreactive vinylferrocene into a powerful dienophile for the Diels-Alder reaction and reactive substrate for thiol addition reactions upon conversion to its ferrocenium state. We have further investigated the ability of these reactions to facilitate redox-auxiliary-like reactivity by further hydrogenolyisis of the Diels-Alder adduct to the corresponding cyclopentane derivative.
RÉSUMÉ
Optimal performance of nanophotonic devices, including sensors and solar cells, requires maximizing the interaction between light and matter. This efficiency is optimized when active moieties are localized in areas where electromagnetic (EM) fields are confined. Confinement of matter in these 'hotspots' has previously been accomplished through inefficient 'top-down' methods. Here we report a rapid 'bottom-up' approach to functionalize selective regions of plasmonic nanostructures that uses nano-localized heating of the surrounding water induced by pulsed laser irradiation. This localized heating is exploited in a chemical protection/deprotection strategy to allow selective regions of a nanostructure to be chemically modified. As an exemplar, we use the strategy to enhance the biosensing capabilities of a chiral plasmonic substrate. This novel spatially selective functionalization strategy provides new opportunities for efficient high-throughput control of chemistry on the nanoscale over macroscopic areas for device fabrication.
RÉSUMÉ
Development of low-cost disposable plasmonic substrates is vital for the applicability of plasmonic sensing. Such devices can be made using injection-molded templates to create plasmonic films. The elements of these plasmonic films are hybrid nanostructures composed of inverse and solid structures. Tuning the modal coupling between the two allows optimization of the optical properties for nanophotonic applications.