RÉSUMÉ
In the present paper we review different aspects of the crystallization of amorphous compounds in relation to specificities of the nucleation and growth rates. Its main purpose is: i) to underline the interest of a scaling analysis of recrystallization kinetics to identify similarities or disparities of experimental kinetic regimes. ii) to highlight the intrinsic link between the nucleation rate and growth rate with a temperature dependent characteristic transformation time τ(T), and a characteristic size ξ(T). The consequences on the influence of the sample size on kinetics of crystallization is considered. The significance of size effect and confinement for amorphous stabilization in the pharmaceutical sciences is discussed.
Sujet(s)
Préparations pharmaceutiques/composition chimique , Chimie pharmaceutique , Cristallisation , Cinétique , TempératureRÉSUMÉ
Two new crystalline polymorphs of the widely used antifungal drug griseofulvin (phases II and III), which originate from the crystallization of the melt, have been detected recently. The crystal structure of phase II of griseofulvin {systematic name: (2S,6'R)-7-chloro-2',4,6-trimethoxy-6'-methyl-3H,4'H-spiro[1-benzofuran-2,1'-cyclohex-2-ene]-3,4'-dione}, C17H17ClO6, has been solved by powder X-ray diffraction (PXRD). The PXRD pattern of this new phase was recorded at room temperature using synchrotron radiation. The starting structural model was generated by a Monte Carlo simulated annealing method. The final structure was obtained through Rietveld refinement with soft restraints for interatomic bond lengths and angles, except for the aromatic ring, where a rigid-body constraint was applied. The symmetry is orthorhombic (space group P212121) and the asymmetric unit contains two molecules.
Sujet(s)
Antifongiques/composition chimique , Griséofulvine/composition chimique , Antifongiques/pharmacologie , Liaison hydrogène , Synchrotrons , Diffraction des rayons XRÉSUMÉ
In this paper, solid-state amorphization induced by mechanical milling is shown to be a useful tool to explore the polymorphism of drugs and their mechanism of devitrification. We show in particular how the recrystallization of amorphous chlorhexidine dihydrochloride obtained by milling reveals a complex polymorphism that involves several polymorphic forms. Two new crystalline forms are identified, one of them appearing as a highly disordered precursor state which however clearly differs from the amorphous one. Several interpretations are here proposed to describe the puzzling nature of this phase. In addition, the possibility to amorphize chlorhexidine dihydrochloride by milling allowed to determine the main physical characters of the amorphous state which cannot be obtained through the usual thermal quench of the liquid because of a strong chemical degradation occurring on melting.
Sujet(s)
Chlorhexidine/composition chimique , Cristallisation/méthodes , Congélation , Transition de phase , TempératureRÉSUMÉ
In this study, the suitability of high-energy ball milling was investigated with the aim to vitrify tadalafil (TD) and improve its bioavailability. To achieve this goal, pure TD as well as binary mixtures composed of the drug and Soluplus (SL) were coprocessed by high-energy ball milling. Modulated differential scanning calorimetry (MDSC) and X-ray powder diffraction (XRD) demonstrated that after such coprocessing, the crystalline form of TD was transformed into an amorphous form. The presence of a single glass transition (Tg) for all the comilled formulations indicated that TD was dispersed into SL at the molecular level, forming amorphous molecular alloys, regardless of the drug concentration. The high values of Tg determined for amorphous formulations, ranging from 70 to 147 °C, foreshow their high stability during storage at room temperature, which was verified by XRD and MDSC studies. The stabilizing effect of SL on the amorphous form of TD in comilled formulations was confirmed. Dissolution tests showed immediate drug release with sustained supersaturation in either simulated gastric fluid of pH 1.2 or in phosphate buffer of pH 7.2. The beneficial effect of both amorphization and coamorphization on the bioavailability of TD was found. In comparison to aqueous suspension, the relative bioavailability of TD was only 11% for its crystalline form and 53% for the crystalline physical mixture, whereas the bioavailability of milled amorphous TD and the comilled solid dispersion was 128% and 289%, respectively. Thus, the results provide evidence that not only the presence of polymeric surfactant but also the vitrification of TD is necessary to improve bioavailability.
Sujet(s)
Tadalafil/composition chimique , Biodisponibilité , Calorimétrie différentielle à balayage , Microscopie électronique à balayage , Diffraction des rayons XRÉSUMÉ
Tadalafil (TD) is a crystalline drug of a high melting point (Tm=299°C) and limited solubility in water (<5µg/mL). These properties may result in reduced and variable bioavailability after oral administration. Since the melting of TD is followed by its decomposition, the drug processing at high temperatures is limited. The aim of the research is, therefore, to improve the dissolution of TD by its co-processing with the hydrophilic polymer Soluplus® (SL) at temperatures below 40°C. In this study, two methods, i.e. high energy ball-milling and supercritical carbon dioxide impregnation (scCO2) are compared, with the aim to predict their suitability for the vitrification of TD. The influence of the amount of SL and the kind of co-processing method on TD thermal properties is analyzed. The results show that only the high energy ball milling process makes it possible to obtain a completely amorphous form of TD, with the characteristic X-ray 'halo' pattern. The intensity of the Bragg peaks diminishes for all the formulations treated with scCO2, but these samples remain crystalline. The MDSC results show that high energy ball milling is capable of forcing the mixing of TD and SL at a molecular level, providing a homogeneous amorphous solid solution. The glass transition temperatures (Tg), determined for the co-milled formulations, range from 79°C to 139°C and they are higher than Tg of pure SL (ca. 70°C) and lower than Tg of pure TD (ca. 149°C). In contrast to the co-milled formulations which are in the form of powder, all the formulations after scCO2 impregnation form a hard residue, sticking to the reaction vessel, which needs to be ground before analysis or further processing. Finally, the dissolution studies show that not only has SL a beneficial effect on the amount of TD dissolved, but also both co-processing methods make the dissolution enhancement of TD possible. After co-processing by scCO2, the amount of TD dissolved increases with the decreasing amount of SL, whereas in the case of the co-milled formulations, the higher the amount of SL in the glassy solution is, the higher the amount of TD dissolved.
Sujet(s)
Dioxyde de carbone/synthèse chimique , Chromatographie en phase supercritique/méthodes , Tadalafil/synthèse chimique , Dioxyde de carbone/pharmacocinétique , Température élevée , Solubilité/effets des médicaments et des substances chimiques , Tadalafil/pharmacocinétiqueRÉSUMÉ
The aim of this work was to determine the main physical characteristics of ß-cyclodextrin polymers, well known for improving complexation capacities and providing enhanced and sustained release of a large panel of drugs. Two polymers were investigated: a polymer of ß-cyclodextrin (polyß-CD) and a polymer of partially methylated (DS=0.57) ß-cyclodextrin (polyMe-ß-CD). The physical characterizations were performed by powder X-ray diffraction and differential scanning calorimetry. The results indicate that these polymers are amorphous and that their glass transition is located above the thermal degradation point of the materials preventing their direct observation and thus their full characterization. We could however estimate the virtual glass transition temperatures by mixing the polymers with different plasticizers (trehalose and mannitol) which decreases Tg sufficiently to make the glass transition observable. Extrapolation to zero plasticizer concentration then yield the following Tg values: Tg (polyMe-ß-CD)=317°C±5°C and Tg (polyß-CD)=418°C±6°C.
Sujet(s)
Cellulose/composition chimique , Cyclodextrines/composition chimique , Préparations à action retardée/composition chimique , Température de transition , Calorimétrie différentielle à balayage , Chimie pharmaceutique , Diffraction des rayons XRÉSUMÉ
Crystalline mesophases, which are commonly classified according to their translational, orientational, and conformational order as liquid crystals, plastic crystals, and conformationally disordered crystals, represent a common state of condensed matter. As an intermediate state between crystalline and amorphous materials, crystalline mesophases resemble amorphous materials in relation to their molecular mobility, with the glass transition being their common property, and at the same time possessing a certain degree of translational periodicity (with the exception of nematic phase), with corresponding narrow peaks in X-ray diffraction patterns. For example, plastic crystals, which can be formed both by near-spherical molecules and molecules of lower symmetry, such as planar or chain molecules, can have both extremely sharp X-ray diffraction lines and exhibit glass transition. Fundamentals of structural arrangements in mesophases are compared with several types of disorder in crystalline materials, as well as with short-range ordering in amorphous solids. Main features of the molecular mobility in crystalline mesophases are found to be generally similar to amorphous materials, although some important differences do exist, depending on a particular type of mobility modes involved in relaxation processes. In several case studies reviewed, chemical stability appears to follow the extent of disorder, with the stability of crystalline mesophase found to be intermediate between amorphous (least stable) and crystalline (most stable) materials. Finally, detection of crystalline mesophases during manufacturing of two different types of dosage forms is discussed.
Sujet(s)
Préparations pharmaceutiques , Cristallisation , Diffraction des rayons XRÉSUMÉ
HPMC-, PVPVA- and PVP-based microparticles loaded with 30% ketoprofen were prepared by spray drying suspensions or solutions in various water:ethanol blends. The inlet temperature, drying gas and feed flow rates were varied. The resulting differences in the ketoprofen release rates in 0.1 M HCl could be explained based on X-ray diffraction, mDSC, SEM and particle size analysis. Importantly, long term stable drug release could be provided, being much faster than: (i) drug release from a commercial reference product, (ii) the respective physical drug:polymer mixtures, as well as (iii) the dissolution of ketoprofen powder as received. In addition, highly supersaturated release media were obtained, which did not show any sign for re-crystallization during the observation period. Surprisingly, spraying suspensions resulted in larger microparticles exhibiting faster drug release compared to spraying solutions, which resulted in smaller particles exhibiting slower drug release. These effects could be explained based on the physico-chemical characteristics of the systems.
Sujet(s)
Excipients/composition chimique , Kétoprofène/administration et posologie , Polymères/composition chimique , Calorimétrie différentielle à balayage , Chimie pharmaceutique/méthodes , Cristallisation , Libération de médicament , Dérivés de l'hypromellose/composition chimique , Kétoprofène/composition chimique , Microscopie électronique à balayage , Taille de particule , Transition de phase , Povidone/analogues et dérivés , Povidone/composition chimique , Solubilité , Température , Diffraction des rayons XRÉSUMÉ
The physical stability of the amorphous state is governed by crystallization, which results from the complex interplay of nucleation and growth processes. These processes can be further complicated by the preferred initial nucleation of less-stable phases, and interpretation requires the evaluation of the relative roles of structure, dynamics, and thermodynamics on the kinetics of the recrystallization. As a contribution to this issue, we reanalyze data sets concerning recrystallization of two pharmaceutical compounds: L-arabitol and RS ibuprofen. These compounds share the property of being good glass formers and present monotropic polymorphism. In the present analysis, we are mainly focusing on the localization of nucleation and growth zones and the role of a transient crystallization of the metastable phase. On the basis of the elementary theories, the results offer the opportunity to discuss the impact of interfacial energies, molecular mobility, crystal disorder, liquid short-range order, and crack formation in the glass.
Sujet(s)
Cristallisation/méthodes , Ibuprofène/composition chimique , Polyols/composition chimique , Verre/composition chimique , Cinétique , Tension superficielle , ThermodynamiqueRÉSUMÉ
In this paper, we study the thermodynamic and structural changes of crystalline linaprazan (a proton pump inhibitor) upon high-energy ball milling at room temperature. The investigations have been performed by differential scanning calorimetry and powder X-ray diffraction. The results indicate that this drug undergoes a direct crystal-to-glass transformation upon milling. Moreover, upon heating, the amorphous material obtained by milling is shown to recrystallize toward two different polymorphs that appear to form a monotropic set.
Sujet(s)
Composés hétérobicycliques/composition chimique , Inhibiteurs de la pompe à protons/composition chimique , Calorimétrie différentielle à balayage , Cristallisation , Préparation de médicament , Taille de particule , Transition de phase , Diffraction sur poudre , Thermodynamique , Diffraction des rayons XRÉSUMÉ
PURPOSE: To clarify the polymorphism of racemic Ibuprofen and to determine the kinetic of the phase transformation that follows crystallisation of phase II. METHODS: Differential Scanning Calorimetry (DSC), X-ray powder diffraction and Hot Stage Microscopy are complementarily used to perform a kinetic investigation of the particular temperature range where competition between the occurrence of phases I and II is suspected. RESULTS: Experiments performed with the three techniques reveal that at 273 K the crystallisation to phase II is then followed by a solid-solid transition towards phase I. This transformation is exothermic (conversion enthalpy of 8.0 ± 0.5 kJ/mol), which proves that the two phases form a monotropic set. The kinetics of conversion deduced from X-Ray experiments follows a Johnson-Mehl-Avrami equation and the Hot Stage Microscopy allows us to establish that the transformation proceeds by the growth of some nuclei of phase I probably formed at lower temperature. CONCLUSIONS: These results allow us to precise the stability pattern of racemic Ibuprofen and to establish the kinetic conditions of appearance and interconversion of the different phases. Therefore such real time resolved investigations would help if applied in the screening of polymorphs when competitive crystallisations occur.
Sujet(s)
Analgésiques non narcotiques/composition chimique , Ibuprofène/composition chimique , Calorimétrie différentielle à balayage , Cristallisation , Cinétique , Transition de phase , Diffraction sur poudre , Diffraction des rayons XRÉSUMÉ
In this paper we present a new protocol to determine faster the solubility of drugs into polymer matrixes. The originality of the method lies in the fact that the equilibrium saturated states are reached by demixing of supersaturated amorphous solid solutions and not by dissolution of crystalline drug into the amorphous polymer matrix as for usual methods. The equilibrium saturated states are thus much faster to reach due to the extra molecular mobility resulting from the strong plasticizing effect associated with the supersaturation conditions. The method is validated using the indomethacin/polyvinylpyrrolidone mixture whose solubility diagram was previously determined by usual techniques. The supersaturated states have been directly obtained in the solid state by comilling, and the investigations have been performed by differential scanning calorimetry and powder X-ray diffraction.
Sujet(s)
Polymères/composition chimique , Calorimétrie , Indométacine/composition chimique , Povidone/composition chimique , Solubilité , Diffraction des rayons XRÉSUMÉ
In this paper, we present an investigation of the polymorphism of griseofulvin. In addition to the only reported crystalline form (form I), two new polymorphic forms (II and III) have been identified and characterized by differential scanning calorimetry and powder X-ray diffraction. Reasons why these two polymorphs were isolated during the present study, but not detected during the numerous previous studies on this drug, are also discussed.
Sujet(s)
Griséofulvine/composition chimique , Diffraction des rayons X/méthodes , Calorimétrie différentielle à balayage/méthodes , Cristallisation , Griséofulvine/analyseRÉSUMÉ
Therapeutic proteins are usually conserved in glassy matrixes composed of stabilizing excipients and a small amount of water, which both control their long-term stability, and thus their potential use in medical treatments. To shed some light on the protein-matrix interactions in such systems, we performed molecular dynamics (MD) simulations on matrixes of (i) the model globular protein lysozyme (L), (ii) the well-known bioprotectant trehalose (T), and (iii) the 1:1 (in weight) lysozyme/trehalose mixture (LT), at hydration levels h of 0.0, 0.075, and 0.15 (in g of water/g of protein or sugar). We also supplemented these simulations with complementary inelastic neutron scattering (INS) experiments on the L, T, and LT lyophilized (freeze-dried) samples. The densities and free volume distributions indicate that trehalose improves the molecular packing of the LT glass with respect to the L one. Accordingly, the low-frequency vibrational densities of states (VDOS) and the mean square displacements (MSDs) of lysozyme reveal that it is less flexible-and thus less likely to unfold-in the presence of trehalose. Furthermore, at low contents (h = 0.075), water systematically stiffens the vibrational motions of lysozyme and trehalose, whereas it increases their MSDs on the nanosecond (ns) time scale. This stems from the hydrogen bonds (HBs) that lysozyme and trehalose form with water, which, interestingly, are stronger than the ones they form with each other but which, nonetheless, relax faster on the ns time scale, given the larger mobility of water. Moreover, lysozyme interacts preferentially with water in the hydrated LT mixtures, and trehalose appears to slow down significantly the relaxation of lysozyme-water HBs. Overall, our results suggest that the stabilizing efficiency of trehalose arises from its ability to (i) increase the number of HBs formed by proteins in the dry state and (ii) make the HBs formed by water with proteins stable on long (>ns) time scales.
Sujet(s)
Excipients/métabolisme , Simulation de dynamique moléculaire , Lysozyme/métabolisme , Tréhalose/métabolisme , Animaux , Poulets , Stabilité enzymatique , Excipients/composition chimique , Lyophilisation , Liaison hydrogène , Lysozyme/composition chimique , Tréhalose/composition chimiqueRÉSUMÉ
The thermodynamic, dynamic, and structural changes of crystalline griseofulvin upon high-energy ball milling at room temperature have been studied. The investigations have been performed by differential scanning calorimetry (DSC), dielectric relaxation spectroscopy, and powder X-ray diffraction. The results indicate that this compound undergoes a direct crystal-to-glass transformation upon milling, whereas no glass transition can be clearly detected upon heating because of the exceptional sub-glass transition temperature (T(g) ) recrystallization of the milled sample. This intrinsic difficulty for characterizing the glassy state has been overcome using three independent strategies: (i) comparison of the evolutions upon milling of both the crystalline powder and the quenched liquid, (ii) use of fast DSC to delay the recrystallization event, and (iii) search for dielectric ß relaxations typical of glasses in the milled compound.
Sujet(s)
Griséofulvine/composition chimique , Calorimétrie différentielle à balayage , Cristallisation , Préparation de médicament , Température , Vitrification , Diffraction des rayons XRÉSUMÉ
It has been previously reported that α-lactose could be totally amorphized by ball milling. In this paper we report a detailed investigation of the structural and microstructural changes by which this solid state amorphization takes place. The investigations have been performed by Powder X-ray Diffraction, Solid State Nuclear Magnetic Resonance ((13)C CP-MAS) and Differential Scanning Calorimetry. The results reveal the structural complexity of the material in the course of its amorphization so that it cannot be considered as a simple mixture made of a decreasing crystalline fraction and an increasing amorphous fraction. Heating this complexity can give rise to a fully nano-crystalline material. The results also show that chemical degradations upon heating are strongly connected to the melting process.
Sujet(s)
Lactose/composition chimique , Phénomènes mécaniques , Transition de phase , Calorimétrie différentielle à balayage , Cristallisation , Cinétique , Spectroscopie par résonance magnétique , Diffraction sur poudre , Thermodynamique , Diffraction des rayons XRÉSUMÉ
An amorphous solid of cyclomaltoheptaose (ß-cyclodextrin, ß-CD) was formed by milling its crystalline form using a high-energy planetary mill at room temperature. The glass transition of this amorphous solid was found to occur above the thermal degradation point of the material preventing its direct observation and thus its full characterization. The corresponding glass transition temperature (T(g)) and the ΔC(p) at T(g) have, however, been estimated by extrapolation of T(g) and ΔC(p) of closely related amorphous compounds. These compounds include methylated ß-CD with different degrees of substitution and molecular alloys obtained by co-milling ß-CD and methylated ß-CD (DS 1.8) at different ratios. The physical characterization of the amorphous states have been performed by powder X-ray diffraction and differential scanning calorimetry, while the chemical integrity of ß-CD upon milling was checked by NMR spectroscopy and mass spectrometry.
Sujet(s)
Verre/composition chimique , Transition de phase , Cyclodextrines bêta/composition chimique , Température de transitionRÉSUMÉ
Lipid implants prepared by melting and casting offer a great potential for advanced drug delivery. However, care must be taken with respect to the solid state of the lipid(s) and potential changes thereof during storage. Generally, a thermal aftertreatment is required. However, little is known about the impact of the curing time and temperature on drug release. The aim of this study was to better understand the importance of these parameters for different types of implants containing propranolol hydrochloride. Hydrogenated cottonseed oil and hydrogenated soybean oil were used as matrix formers. The implants were characterized with respect to their in vitro release kinetics, water uptake, thermal properties, and morphology. On the basis of these experimental results, a mechanistic mathematical model was used to gain further insight into the underlying mass transport mechanisms. Both the curing time and the temperature strongly affected the resulting drug release patterns. Importantly, in most cases, these effects could not be attributed to polymorph transformations but to changes in the implants' microstructure. The size of the lipid particles depended on both the curing time and the temperature, and determined the size of the pores/channels through which water and drug diffuse. The importance of this aspect is often underestimated.
Sujet(s)
Huile de coton/composition chimique , Systèmes de délivrance de médicaments/méthodes , Implant pharmaceutique , Huile de soja/composition chimique , Technologie pharmaceutique/méthodes , Calorimétrie différentielle à balayage , Microscopie électronique à balayage , Modèles chimiques , Taille de particule , Transition de phase , Poudres , Propranolol/administration et posologie , Propranolol/composition chimique , Solubilité , Propriétés de surface , Température , Facteurs temps , Eau/composition chimiqueRÉSUMÉ
Raman investigations are carried out both in crystalline forms of caffeine and during the isothermal transformation of the orientationally disordered form I into the stable form II at 363 K. The time dependence of the Raman spectrum exhibits no significant change in the intramolecular regime (above 100 cm(-1)), resembling the spectrum of the liquid state. By contrast, significant changes are observed below 100 cm(-1), and the low-frequency spectra of forms I and II are observed to be different from that of the liquid. The temperature dependence of the 5-600 cm(-1) spectrum gives information on the static disorder through the analysis of collective motions, while information on dynamic disorder are obtained from the study of the 555 cm(-1) band corresponding to internal vibrations in the pyrimidine ring. This analysis indubitably reveals that form II is also orientationally disordered with a local molecular arrangement that mimics that in form I and the liquid state. The comparison of the low-frequency spectra recorded in theophylline and form II of caffeine allows one to describe the stable form of caffeine from the packing arrangement of anhydrous theophylline with the consideration of reorientational molecular disorder.