Nickel-Catalyzed Enantioselective C(sp3)-C(sp3) Cross-Electrophile Coupling of N-Sulfonyl Styrenyl Aziridines with Alkyl Bromides.

Herein, we report the first example of a highly enantioselective alkylative aziridine ring opening. Under the catalysis of a chiral nickel/pyridine-imidazoline complex, asymmetric C(sp3)-C(sp3) cross-electrophile coupling between racemic N-sulfonyl styrenyl aziridines and readily available primary alkyl bromides furnishes a variety of highly enantioenriched phenethylamine derivatives with complete regiocontrol and good functional group tolerance. Preliminary mechanistic studies support a reaction pathway consisting of regioselective iodolysis of aziridines in situ and subsequent enantioconvergent coupling of the generated ß-amino benzyl iodides with alkyl bromides.

Metal-carbene-guided twofold cross-coupling of ethers with chromium catalysis.

Coupling by metal-carbene transfer enables the formation of several different bonds at the carbenoid site, enabling prochiral Csp3 centers that are fundamental three-dimensional substructures for medicines to be forged with increased efficiency. However, strategies using bulk chemicals are rare because of the challenge of breaking two unactivated geminal bonds. Herein, we report the reactivity of ethers to form metal-carbene intermediate by cleavage of α-Csp3-H/Csp3-O bonds, which achieve selective coupling with arylmagnesium bromides and chlorosilanes. These couplings are catalysed by cyclic (alkyl)(amino)carbene-chromium complex and enable the one-step formation of 1,n-arylsilyl alcohols and α-arylated silanes. Mechanistic studies indicate that the in-situ formed low-valent Cr might react with iodobenzene to form phenyl radical species, which abstracts the α-H atom of ether in giving α-oxy radical. The latter combines with Cr by breaking α-Csp3-O bond to afford metal-carbene intermediate, which couples with aryl Grignard and chlorosilane to form two σ-bonds.

Functional characterization of AcWRKY94 in response to Pseudomonas syringae pv. actinidiae in kiwifruit.

WRKY transcription factors are essential for coping with various biotic stresses. Pseudomonas syringae pv. actinidiae (Psa)-induced kiwifruit canker is a major problem restricting kiwifruit yield. Nevertheless, it's unclear how the kiwifruit WRKY genes respond to Psa. Through genome-wide identification, 112 WRKY members were found in 'Hongyang' genome in this work. Promoter analysis revealed that there were many cis-acting elements associated with stress responses in the AcWRKY gene's promoter region. According to transcriptomic analysis, 90 of the AcWRKY genes were differently expressed following Psa, salicylic acid (SA), or methyl jasmonate (MeJA) treatments. Almost all group III WRKYs were responsive to at least one of these treatments, with tissue-specific expression patterns. Quantitative RT-PCR study provided more evidence that Psa and SA treatments significantly induced the expression of the group III WRKY gene AcWRKY94, whereas MeJA treatment repressed it. AcWRKY94 was a transcriptionally active protein localized in the nucleus. Transient overexpression of AcWRKY94 in the leaves of 'Hongyang' enhanced the resistance of kiwifruit to Psa. Overexpression of AcWRKY94 in kiwifruit callus remarkably promoted the expression of PR and JAZ genes associated with SA and JA signals, respectively. These data imply that AcWRKY94 controls the signaling pathway dependent on SA and JA, thereby enhancing resistance to Psa. Taken together, this study establishes the basis for functional research on WRKY genes and provides important information for elucidating the resistance mechanism of kiwifruit canker disease.

Fungicide resistance in Colletotrichum fructicola and Colletotrichum siamense causing peach anthracnose in China.

Peach is one of the popular and economically important fruit crops in China. Peach cultivation is hampered due to attacks of anthracnose disease, causing significant economic losses. Colletotrichum fructicola and Colletotrichum siamense belong to the Colletotrichum gloeosporioides species complex and are considered major pathogens of peach anthracnose. Application of different groups of fungicides is a routine approach for controlling this disease. However, fungicide resistance is a significant drawback in managing peach anthracnose nowadays. In this study, 39 isolates of C. fructicola and 41 isolates of C. siamense were collected from different locations in various provinces in China. The sensitivity of C. fructicola and C. siamense to some commonly used fungicides, i.e., carbendazim, iprodione, fluopyram, and propiconazole, was determined. All the isolates of C. fructicola collected from Guangdong province showed high resistance to carbendazim, whereas isolates collected from Guizhou province were sensitive. In C. siamense, isolates collected from Hebei province showed moderate resistance, while those from Shandong province were sensitive to carbendazim. On the other hand, all the isolates of C. fructicola and C. siamense showed high resistance to the dicarboximide (DCF) fungicide iprodione and succinate dehydrogenase inhibitor (SDHI) fungicide fluopyram. However, they are all sensitive to the demethylation inhibitor (DMI) fungicide propiconazole. Positive cross-resistance was observed between carbendazim and benomyl as they are members of the same methyl benzimidazole carbamate (MBC) group. While no correlation of sensitivity was observed between different groups of fungicides. No significant differences were found in each fitness parameter between carbendazim-resistant and sensitive isolates in both species. Molecular characterization of the ß-tubulin 2 (TUB2) gene revealed that in C. fructicola, the E198A point mutation was the determinant for the high resistance to carbendazim, while the F200Y point mutation was linked with the moderate resistance to carbendazim in C. siamense. Based on the results of this study, DMI fungicides, e.g., propiconazole or prochloraz could be used to control peach anthracnose, especially at locations where the pathogens have already developed the resistance to carbendazim and other fungicides.

New insights into the mechanism of resistance to lenvatinib and strategies for lenvatinib sensitization in hepatocellular carcinoma.

Lenvatinib is a multikinase inhibitor that suppresses vascular endothelial growth factor receptor (VEGFR), fibroblast growth factor receptor (FGFR), platelet-derived growth factor receptor α (PDGFRα), as well as the proto-oncogenes RET and KIT. Lenvatinib has been approved by the US Food and Drug Administration (FDA) for the first-line treatment of hepatocellular carcinoma (HCC) due to its superior efficacy when compared to sorafenib. Unfortunately, the development of drug resistance to lenvatinib is becoming increasingly common. Thus, there is an urgent need to identify the factors that lead to drug resistance and ways to mitigate it. We summarize the molecular mechanisms that lead to lenvatinib resistance (LR) in HCC, which involve programmed cell death (PCD), translocation processes, and changes in the tumor microenvironment (TME), and provide strategies to reverse resistance.

Age Estimation by Machine Learning and CT-Multiplanar Reformation of Cranial Sutures in Northern Chinese Han Adults.

OBJECTIVES: To establish age estimation models of northern Chinese Han adults using cranial suture images obtained by CT and multiplanar reformation (MPR), and to explore the applicability of cranial suture closure rule in age estimation of northern Chinese Han population. METHODS: The head CT samples of 132 northern Chinese Han adults aged 29-80 years were retrospectively collected. Volume reconstruction (VR) and MPR were performed on the skull, and 160 cranial suture tomography images were generated for each sample. Then the MPR images of cranial sutures were scored according to the closure grading criteria, and the mean closure grades of sagittal suture, coronal sutures (both left and right) and lambdoid sutures (both left and right) were calculated respectively. Finally taking the above grades as independent variables, the linear regression model and four machine learning models for age estimation (gradient boosting regression, support vector regression, decision tree regression and Bayesian ridge regression) were established for northern Chinese Han adults age estimation. The accuracy of each model was evaluated. RESULTS: Each cranial suture closure grade was positively correlated with age and the correlation of sagittal suture was the highest. All four machine learning models had higher age estimation accuracy than linear regression model. The support vector regression model had the highest accuracy among the machine learning models with a mean absolute error of 9.542 years. CONCLUSIONS: The combination of skull CT-MPR and machine learning model can be used for age estimation in northern Chinese Han adults, but it is still necessary to combine with other adult age estimation indicators in forensic practice.

Development of a tomato xylem-mimicking microfluidic system to study Ralstonia pseudosolanacearum biofilm formation.

The bacterial wilt pathogen Ralstonia pseudosolanacearum (Rps) colonizes plant xylem vessels and blocks the flow of xylem sap by its biofilm (comprising of bacterial cells and extracellular material), resulting in devastating wilt disease across many economically important host plants including tomatoes. The technical challenges of imaging the xylem environment, along with the use of artificial cell culture plates and media in existing in vitro systems, limit the understanding of Rps biofilm formation and its infection dynamics. In this study, we designed and built a microfluidic system that mimicked the physical and chemical conditions of the tomato xylem vessels, and allowed us to dissect Rps responses to different xylem-like conditions. The system, incorporating functional surface coatings of carboxymethyl cellulose-dopamine, provided a bioactive environment that significantly enhanced Rps attachment and biofilm formation in the presence of tomato xylem sap. Using computational approaches, we confirmed that Rps experienced linear increasing drag forces in xylem-mimicking channels at higher flow rates. Consistently, attachment and biofilm assays conducted in our microfluidic system revealed that both seeding time and flow rates were critical for bacterial adhesion to surface and biofilm formation inside the channels. These findings provided insights into the Rps attachment and biofilm formation processes, contributing to a better understanding of plant-pathogen interactions during wilt disease development.

Methods for improving imaging quality of a small-distance high-speed rotational reflection tracking system.

The imaging quality of a rotational reflection high-speed tracking system is greatly affected by the optical characteristics of the reflector and the depth of field limitations of the imaging system, especially for tracking systems working in small distances. In order to improve the imaging quality, this paper focused on two factors that affect the imaging quality: double vision caused by the optical characteristics of reflectors and blurring caused by the depth of field of imaging systems. This paper quantified the impact of these two factors on imaging through theoretical analysis, proposed a method of changing the hardware position, and conducted a simulation and experiments. The results show that the proposed solution in this paper can effectively improve the imaging quality of the system. The content studied in this paper has certain significance in the field of high-speed tracking of rotating reflectors and can provide reference for relevant researchers.

Research Progress on Dental Age Estimation Based on MRI Technology.

Dental age estimation is a crucial aspect and one of the ways to accomplish forensic age estimation, and imaging technology is an important technique for dental age estimation. In recent years, some studies have preliminarily confirmed the feasibility of magnetic resonance imaging (MRI) in evaluating dental development, providing a new perspective and possibility for the evaluation of dental development, suggesting that MRI is expected to be a safer and more accurate tool for dental age estimation. However, further research is essential to verify its accuracy and feasibility. This article reviews the current state, challenges and limitations of MRI in dental development and age estimation, offering reference for the research of dental age assessment based on MRI technology.

Flexible terahertz phase shifter for optically controlled polydimethylsiloxane-vanadium dioxide composite film.

In the terahertz (THz) band, modulation research has become a focal point, with precise control of the phase shift of THz waves playing a pivotal role. In this study, we investigate the optical control of THz phase shift modulation in a polydimethylsiloxane (PDMS)-vanadium dioxide (VO2) flexible material using THz time-domain spectroscopy. Under the influence of an 808-nm continuous wave (CW) laser with power densities ranging from 0 to 2.74 W/cm2, the PDMS-VO2 flexible material exhibits significant phase shift modulation in the frequency range of 0.2 to 1.0 THz. The maximum optical-pumping phase shift reaches 0.27π rad at 1.0 THz in a composite material with a VO2 mass fraction of 5% and a thickness of 360 µm, and the amplitude transmittance from 0.2 THz to 1.0 THz exceeds 70%. Furthermore, the composite material exhibits good stability under at least 640 switching cycle times, as confirmed through repeatability tests. The proposed composite devices offer a new approach for more flexible phase shift modulation owing to the flexibility of the composite material and the non-contact and precise modulation of light control. Additionally, the stress-adjustable characteristics of flexible materials make them highly suitable for use in wearable THz modulators, highlighting their significant application potential.

Experimental Study on Enhancing the Mechanical Properties of Sandy Soil by Combining Microbial Mineralization Technology with Silty Soil.

Currently, coastal sandy soils face issues such as insufficient foundation strength, which has become one of the crucial factors constraining urban development. Geotechnical engineering, as a traditional discipline, breaks down disciplinary barriers, promotes interdisciplinary integration, and realizes the green ecological and low-carbon development of geotechnical engineering, which is highly important. Based on the "dual carbon" concept advocating a green and environmentally friendly lifestyle, Bacillus spores were utilized to induce calcium carbonate precipitation technology (MICP) to solidify coastal sandy soils, leveraging the rough-surface and low-permeability characteristics of silty soil. The mechanical-strength variations in the samples were explored through experiments, such as calcium carbonate generation rate tests, non-consolidated undrained triaxial shear tests, and scanning electron microscopy (SEM) experiments, to investigate the MICP solidification mechanism. The results indicate that by incorporating silty soil into sandy soil for MICP solidification, the calcium carbonate generation rates of the samples were significantly increased. With the increase in the silty-soil content, the enhancement range was 0.58-3.62%, with the maximum calcium carbonate generation rate occurring at a 5% content level. As the silty-soil content gradually increased from 1% to 5%, the peak deviator stress increased by 4.2-43.2%, enhancing the sample shear strength. Furthermore, the relationship between the internal-friction angle, cohesion, and shear strength further validates the enhancement of the shear strength. Silty soil plays roles in adsorption and physical filling during the MICP solidification process, reducing the inter-particle pores in sandy soil, increasing the compactness, providing adsorption sites, and enhancing the calcium carbonate generation rate, thereby improving the shear strength. The research findings can provide guidance for reinforcing poor coastal sandy-soil foundations in various regions.

Solid-Phase-Supported Chemoenzymatic Synthesis and Analysis of Chondroitin Sulfate Proteoglycan Glycopeptides.

Proteoglycans (PGs), consisting of glycosaminoglycans (GAGs) linked with the core protein through a tetrasaccharide linkage region, play roles in many important biological events. The chemical synthesis of PG glycopeptides is extremely challenging. In this work, the enzymes required for synthesis of chondroitin sulfate (CS) PG (CSPG) have been expressed and the suitable sequence of enzymatic reactions has been established. To expedite CSPG synthesis, the peptide acceptor was immobilized on solid phase and the glycan units were directly installed enzymatically onto the peptide. Subsequent enzymatic chain elongation and sulfation led to the successful synthesis of CSPG glycopeptides. The CS dodecasaccharide glycopeptide was the longest homogeneous CS glycopeptide synthesized to date. The enzymatic synthesis was much more efficient than the chemical synthesis of the corresponding CS glycopeptides, which could reduce the total number of synthetic steps by 80 %. The structures of the CS glycopeptides were confirmed by mass spectrometry analysis and NMR studies. In addition, the interactions between the CS glycopeptides and cathepsin G were studied. The sulfation of glycan chain was found to be important for binding with cathepsin G. This efficient chemoenzymatic strategy opens new avenues to investigate the structures and functions of PGs.

Clinical Application of Botulinum Toxin A on Nasal Reconstruction with Expanded Forehead Flap for Asian Patients.

BACKGROUND: Because of its unique advantages, frontal expansion has become a common tool for Asian nasal reconstruction, but it has the limitations of prolonging the duration and pain in the expansion area. Based on the fact that the denervation effect of botulinum toxin type A (BTX-A) has been widely used in the reconstruction of superficial organs, we hypothesized that BTX-A would shorten the length of nasal reconstruction sequence and alleviate the discomfort of patients. METHODS: A comparative retrospective study was conducted of consecutive patients underwent sequential treatment of nasal reconstruction between June 2010 and July 2012. Data on demographics, BTX-A injection plan and expansion duration were collected and analyzed. Phased pain intensity outcomes were evaluated by visual analogue scale (VAS). Photographs were collected during the follow-up period. RESULTS: Thirty patients were enrolled in the study; 15 (50%) with and 15 (50%) without BTX-A pre-injection. Demographic data were homogeneous. The duration of the observation group (BTX-A pretreated) (133.87 ± 13.64 days) was significantly shortened versus the control group (164.27 ± 14.08 days, P<0.001). At the initial stage, no significant difference was found in the VAS scores (P=0.64). At the medium stage, the VAS score of the observation group (2.07 ± 0.80) was significantly lower than the control group (3.00 ± 0.53, P<0.01). At the terminal stage, the VAS score of the observation group (1.93 ± 0.59) was significantly lower than the control group (2.73 ± 0.70) but with a narrower disparity. CONCLUSION: Pre-injection of BTX-A is effective in shortening the duration of the expansion phase, as well as relieving the pain associated with expansion. LEVEL OF EVIDENCE IV: The journal asks authors to assign a level of evidence to each article. For a complete description of Evidence-Based Medicine ratings, see the Table of Contents or the online Instructions for Authors at www.springer.com/00266 .

Building Uniformly Structured Polymer Memristors via a 2D Conjugation Strategy for Neuromorphic Computing.

Polymer memristors represent a highly promising avenue for the advancement of next-generation computing systems. However, the intrinsic structural heterogeneity characteristic of most polymers often results in organic polymer memristors displaying erratic resistive switching phenomena, which in turn lead to diminished production yields and compromised reliability. In this study, a 2D conjugated polymer, named PBDTT-BPQTPA, is synthesized by integrating the coplanar bis(thiophene)-4,8-dihydrobenzo[1,2-b:4,5-b]dithiophene (BDTT) as an electron-donating unit with a quinoxaline derivative serving as an electron-accepting unit. The incorporation of triphenylamine groups at the quinoxaline termini significantly enhances the polymer's conjugation and planarity, thereby facilitating more efficient charge transport. The fabricated polymer memristor with the structure of Al/PBDTT-BPQTPA/ITO exhibits typical non-volatile resistive switching behavior under high voltage conditions, along with history-dependent memristive properties at lower voltages. The unique memristive behavior of the device enables the simulation of synaptic enhancement/inhibition, learning algorithms, and memory operations. Additionally, the memristor demonstrates its capability for executing logical operations and handling decimal calculations. This study offers a promising and innovative approach for the development of artificial neuromorphic computing systems.

KIAA0040 enhances glioma growth by controlling the JAK2/STAT3 signalling pathway.

The role of KIAA0040 role in glioma development is not yet understood despite its connection to nervous system diseases. In this study, KIAA0040 expression levels were evaluated using qRT-PCR, WB and IHC, and functional assays were conducted to assess its impact on glioma progression, along with animal experiments. Moreover, WB was used to examine the impact of KIAA0040 on the JAK2/STAT3 signalling pathway. Our study found that KIAA0040 was increased in glioma and linked to tumour grade and poor clinical outcomes, serving as an independent prognostic factor. Functional assays showed that KIAA0040 enhances glioma growth, migration and invasion by activating the JAK2/STAT3 pathway. Of course, KIAA0040 enhances glioma growth by preventing tumour cell death and promoting cell cycle advancement. Our findings suggest that targeting KIAA0040 could be an effective treatment for glioma due to its role in promoting aggressive tumour behaviour and poor prognosis.

High-speed target tracking control system based on short-time rotational reflection imaging.

High-speed tracking technology has wide applications in the military and aerospace industry. However, existing approaches, such as camera arrays or Doppler radar systems, suffer from high cost and inconvenience. This paper reports a high-speed target tracking control system based on short-time rotational reflection imaging, specifically aimed at overcoming certain limitations. In the system we designed, a high-speed camera coupled with a rotating reflector is used to achieve reliable high-speed target tracking. This paper first introduces the working principle and mathematical model of the system, then analyzes the key technologies, including motor response delay time and rotational speed curve fitting, and, finally, verifies the feasibility of the system and the correctness of the theory based on a series of experiments. Experimental results demonstrated that our work is efficient and accurate in target tracking and image clarity. The developed system demonstrates significant potential for widespread use across military and aerospace sectors. Furthermore, the insights gained from our investigation into key technologies could act as a reference point for fellow researchers in related scientific areas.

Tunneled Paranasal Augmentation Using Diced Autologous Costal Cartilage in Asian Rhinoplasty: A Comparative Study.

Due to the prevalence of anterior maxilla dysplasia in Asian population, paranasal concavity is a common accompaniment to low nose, but its impact on facial harmonization is often underestimated. A retrospective comparative study was conducted on patients diagnosed as low nose with paranasal concavity between June 2017 and June 2021, with a total of 56 patients followed up successfully. The control and observation groups were established according to whether the paranasal augmentation was performed. Demographic data were collected. Cosmetic enhancement was quantitatively evaluated by sagittal planimetry, establishing related anatomical landmarks and measuring columella base prominence (CBP) and alar base prominence (ABP). Subjective evaluation concluded the patient-reported satisfaction (FACE-Q-Rhinoplasty Module and Facial Appearance Module) and the third-party physician assessment (Global Aesthetic Improvement Scale, GAIS).Significant improvements in CBP and ABP were reported both in the control and the observation group (p < 0.01). In postoperative intergroup comparisons, the observation group was superior to the control group regarding ABP values (2.5 ± 0.75 degrees, p < 0.01), FACE-Q-Facial scores (7.49 ± 3.70, p < 0.05), and GAIS scores (p < 0.05). However, no statistical difference was found in CBP values and FACE-Q-Rhinoplasty scores. Paranasal augmentation-related complications included asymmetry of alar bases (6.9%) and facial or intraoral foreign body sensation (34.5%). This study affirmed that paranasal augmentation using diced costal cartilage in rhinoplasty is a safe procedure effective in remedying paranasal concavity and improving facial satisfaction. LEVEL OF EVIDENCE:: IV.

Broadband light absorption by a hemispherical concentric nanoshell array.

Achieving highly efficient broadband absorption is an important research area in nanophotonics. In this paper, a novel method is proposed to design broadband near-perfect absorbers, consisting of a four-layer hemispherical concentric nanoshell array. The proposed nanostructure supports absorptivity exceeding 95% in the entire visible region, and the absorption bandwidth is determined by the interaction or 'hybridization' of the plasmons of the inner and outer metal-based nanoshells. Moreover, the designed absorber has wide-angle capability and is insensitive to polarization. The simple structure, as well as the stable absorption properties, suggests that such core-shell nanostructures can serve as a potential candidate for many applications such as solar energy harvesting, photo-detection, and emissivity control.

[Advances of studies on culture and product functions of Euglena gracilis].

Euglena gracilis is a unicellular eukaryote between animal and plant cells, which is widely distributed in nature. E. gracilis has both plant and animal characteristics, and can grow photoautotrophically, heterotrophically and mixotrophically. E. gracilis also features on abundant and various cellular composition. Recently, extensive researches on unique cellular components of E. gracilis have revealed its application in the field of medicine, food, and feedstuff, in terms of improving immunity, fighting inflammation, and lowering uric acid levels. The application prospects of paramylon in biomedical area were also discovered. As food ingredients, food additives, feedstuffs and cosmetic ingredients, E. gracilis has been certified domestically and overseas. A series of products have been developed overseas, especially in Japan. However, the research and development of E. gracilis are still in its infancy in China, and there is huge space for development. At present, the research and potential application of cultivation and product functions of E. gracilis have been rarely reviewed. This review systematically examines both the domestic and abroad research of cultivation and production of E. gracilis, as well as the biological activity of E. gracilis powder and paramylon. The existing problems in the application, exploitation, and possible development direction of E. gracilis in the future are prospected. This review might be useful for establishing and optimizing large-scale and efficient heterotrophic technology, as well as developing related products of E. gracilis with specific functions.

Simultaneous determination of diquat, paraquat, glufosinate, and glyphosate in plasma by liquid chromatography/tandem mass spectrometry: from method development to clinical application.

Diquat (DQ), paraquat (PQ), glufosinate (GLU), and glyphosate (GLYP) are commonly used herbicides that have been confirmed to be toxic to humans. Rapid and accurate measurements of these toxicants in clinical practice are beneficial for the correct diagnosis and timely treatment of herbicide-poisoned patients. The present study aimed to establish an efficient, convenient, and reliable method to achieve the simultaneous quantification of DQ, PQ, GLU, and GLYP in human plasma using liquid chromatography-tandem mass spectrometry (LC-MS/MS) without using derivatization or ion-pairing reagents. DQ, PQ, GLU, and GLYP were extracted by the rapid protein precipitation and liquid-liquid extraction method and then separated and detected by LC-MS/MS. Subsequently, linearity, limit of detection (LOD), limit of quantification (LOQ), precision, accuracy, extraction recovery, matrix effect, dilution integrity, and stability were evaluated to validate the method based on the FDA criteria. Finally, the validated method was applied to real plasma samples collected from 166 Chinese patients with herbicide poisoning. The results showed satisfactory linearity with low LOD (1 ng/mL for DQ and PQ, 5 ng/mL for GLU, and 10 ng/mL for GLYP, respectively) and low LOQ (5 ng/mL for DQ and PQ, 25 ng/mL for GLU and GLYP, respectively). In addition, the precision, accuracy, extraction recovery, and stability of the method were acceptable. The matrix effect was not observed in the analyzed samples. Moreover, the developed method was successfully applied to determine the target compounds in real plasma samples. These data provided reliable evidence for the application of this LC-MS/MS method for clinical poisoning detection.