Meso/Microporous Single-Atom Catalysts with Curved Fe-N4 sites Boost the Oxygen Reduction Reaction Activity.

Zeolitic-imidazolate frameworks (ZIFs) are among the most efficient precursors for the synthesis of atomically dispersed Fe-N/C materials, which are promising catalysts for enhancing the performance of Zn-air batteries (ZABs) and proton exchange fuel cells (PEMFCs). However, existing ZIF-derived Fe-N/C electrocatalysts mostly consist of microporous materials, leading to insufficient mass transport and inadequate battery/cell performance. In this study, we synthesize an atomically dispersed meso/microporous Fe-N/C material with curved Fe-N4 active sites, denoted as FeSA-N/TC, through the pyrolysis of hemin-modified ZIF films on ZnO nanorods, obtained from the self-assembly reaction between Zn2+ from ZnO hydrolysis and 2-methylimidazole. Density functional theory calculations demonstrate that the curved Fe-N4 active sites can weaken the intermediate adsorptions, resulting in lower free energy barriers and enhanced performance during oxygen reduction reaction (ORR). Specifically, FeSA-N/TC exhibits exceptional ORR performance with half-wave potentials of 0.925 V in alkaline media and 0.825 V in acidic media. When used as the cathodic catalyst in PEMFCs and ZABs, FeSA-N/TC achieves high peak power densities (H2-O2 PEMFC: 1100 mW cm-2; H2-Air PEMFC: 715 mW cm-2; liquid-state ZAB: 228 mW cm-2; solid-state ZAB: 112 mW cm-2), demonstrating its feasibility and efficiency in practical applications.

Enhanced Photocatalytic Hydrogen Production Activity Driven by TiO2/(MoP/CdS): Insights from Powder Particles to Thin Films.

Transitioning from powder photocatalysts to thin film photocatalysts is one of the necessary steps toward industrializing photocatalytic hydrogen production. Herein, we reported the integration of non-noble metal cocatalyst MoP decorated with TiO2 and CdS, forming TiO2/(MoP/CdS) for ultraviolet-visible light utilization. The designed powder TiO2/(MoP/CdS) composites achieved a superior hydrogen production rate of 42.2 mmol g-1 h-1, which is 30.1 times that of TiO2/CdS, performing the highest activity among the TiO2-CdS-based composite photocatalysts. Moreover, we fabricated a thin film from TiO2/(MoP/CdS) powder, which exhibited comparable photocatalytic activity for hydrogen production, achieving 35.5 mmol g-1 h-1 and maintaining long-term stability for 150 h. The outstanding performance was attributed to the ability of the TiO2/(MoP/CdS) composite photocatalysts to absorb both visible and ultraviolet light. Additionally, the heterojunction formed between TiO2 and CdS also played a significant role in the overall photocatalyst activity. This cost-effective catalyst holds promise for future large-scale industrial applications.

Discovery of a long-ranged charge order with 1/4 Ge1-dimerization in an antiferromagnetic Kagome metal.

Exotic quantum states arise from the interplay of various degrees of freedom such as charge, spin, orbital, and lattice. Recently, a short-ranged charge order (CO) was discovered deep inside the antiferromagnetic phase of Kagome magnet FeGe, exhibiting close relationships with magnetism. Despite extensive investigations, the CO mechanism remains controversial, mainly because the short-ranged behavior hinders precise identification of CO superstructure. Here, combining multiple experimental techniques, we report the observation of a long-ranged CO in high-quality FeGe samples, which is accompanied with a first-order structural transition. With these high-quality samples, the distorted 2 × 2 × 2 CO superstructure is characterized by a strong dimerization along the c-axis of 1/4 of Ge1-sites in Fe3Ge layers, and in response to that, the 2 × 2 in-plane charge modulations are induced. Moreover, we show that the previously reported short-ranged CO might be related to large occupational disorders at Ge1-site, which upsets the equilibrium of the CO state and the ideal 1 × 1 × 1 structure with very close energies, inducing nanoscale coexistence of these two phases. Our study provides important clues for further understanding the CO properties in FeGe and helps to identify the CO mechanism.

Carbon-coated nickel phosphide enhances efficiently electron transfer of cadmium sulfide for photocatalytic hydrogen production.

The capacitance of a co-catalyst can be likened to a "double-edged sword". Α co-catalysts with high capacitance can store photoexcited electrons, thereby facilitating charge separation within the host catalyst. However, this property simultaneously restricts electron release. Both effects are enhanced with an increasing capacitance value, implying that excessively high capacitance can significantly hinder the photocatalytic hydrogen (H2) production reaction. Herein, we have designed a metal-organic framework (MOF) -derived carbon-coated nickel phosphide (C-Ni5P4) as the co-catalyst of cadmium sulfide (CdS). When C-Ni5P4 and CdS are closely interconnected, electrons spontaneously migrate from CdS to C-Ni5P4 under irradiation due to the higher work function (WF) of C-Ni5P4 compared to CdS. Most importantly, although the WF of C-Ni5P4 is 0.1 eV lower than that of Ni5P4, its specific capacitance (1.2 mF/cm2) is also lower than that of Ni5P4 (1.3 mF/cm2). This difference dramatically promotes electron release. Thereby exerting a strong positive effect on capacitance catalysis. Therefore, 7% C-Ni5P4/CdS exhibits exceptional cyclic stability and has a remarkably high activity level of 12283 µmol/h/g and 3.8 times as many as 3.0 %Ni5P4/CdS. This study provides a theoretical basis for the advancement of photocatalysts with high efficiency in H2 production and is expected to be applied in other fields of photocatalysis.

Resolving and correcting for kinetic biases on methane seep paleotemperature using carbonate ∆47/∆48 analysis.

Methane-derived authigenic carbonate often constitutes the sole remaining record of relic methane seeps. The clumped (∆47) and oxygen isotopic composition of seep carbonates often yield inaccurate temperatures, attributed to kinetic isotope effects and modification of seawater isotope composition by hydrate water. Here, we analyzed the dual-clumped isotope (∆47/∆48) composition of authigenic carbonate from a modern methane seep. We demonstrate that aragonite forms closest to isotopic equilibrium such that its ∆47 can directly yield the correct formational temperature, whereas calcite is unambiguously biased by kinetic isotope effects. Numerical models show that the observed bias in the isotopic composition arises from rate-limiting dehydration/dehydroxylation of HCO3- alongside diffusive fractionation, which can be corrected for with analysis of carbonate ∆47/∆48 values. We demonstrate the utility of dual-clumped isotope analysis for studying seep carbonates, as it reveals the origin and magnitude of kinetic biases and can be used to reconstruct paleotemperature and seawater δ18O.

A fast and high precision multi-robot environment modeling based on M-BFSI: Bidirectional filtering and scene identification method.

This article designs and implements a fast and high-precision multi-robot environment modeling method based on bidirectional filtering and scene identification. To solve the problem of feature tracking failure caused by large angle rotation, a bidirectional filtering mechanism is introduced to improve the error-matching elimination algorithm. A global key frame database for multiple robots is proposed based on a pretraining dictionary to convert images into a bag of words vectors. The images captured by different sub-robots are compared with the database for similarity score calculation, so as to realize fast identification and search of similar scenes. The coordinate transformation from local map to global map and the cooperative SLAM exploration of multiple robots is completed by the best matching image and the transformation matrix. The experimental results show that the proposed algorithm can effectively close the predicted trajectory of the sub-robot, thus achieving high-precision collaborative environment modeling.

[Cloning and expression pattern analysis of abscisic acid receptor gene McPYL4 in Mentha canadensis].

Mentha canadensis is a traditional Chinese herb with great medicinal and economic value. Abscisic acid(ABA) receptor PYLs have important roles in plant growth and development and response to adversity. The M. canadensis McPYL4 gene was cloned, and its protein characteristics, gene expression, and protein interactions were analyzed, so as to provide genetic resources for genetic improvement and molecular design breeding for M. canadensis resistance. Therefore, the protein characteristics, subcellular localization, gene expression pattern, and protein interactions of McPYL4 were analyzed by bioinformatics analysis, transient expression of tobacco leaves, RT-qPCR, and yeast two-hybrid(Y2H) techniques. The results showed that the McPYL4 gene was 621 bp in length, encoding 206 amino acids, and its protein had the conserved structural domain of SRPBCC and was highly homologous with Salvia miltiorrhiza SmPYL4. McPYL4 protein was localized to the cell membrane and nucleus. The McPYL4 gene was expressed in all tissue of M. canadensis, with the highest expression in roots, followed by leaves, and it showed a pattern of up-regulation followed by down-regulation in leaves 1-8. In both leaves and roots, the McPYL4 gene responded to the exogenous hormones ABA, MeJA, and the treatments of drought, AlCl_3, NaCl, CdCl_2, and CuCl_2. Moreover, McPYL4 was up-regulated for expression in both leaves and roots under the MeJA treatment, as well as in leaves treated with AlCl_3 stress for 1 h, whereas McPYL4 showed a tendency to be down-regulated in both leaves and roots under other treatments. Protein interactions showed that McPYL4 interacted with AtABI proteins in an ABA-independent manner. This study demonstrated that McPYL4 responded to ABA, JA, and several abiotic stress treatments, and McPYL4 was involved in ABA signaling in M. canadensis and thus in the regulation of leaf development and various abiotic stresses in M. canadensis.

Single-cell chromatin profiling reveals genetic programs activating proregenerative states in nonmyocyte cells.

Cardiac regeneration requires coordinated participation of multiple cell types whereby their communications result in transient activation of proregenerative cell states. Although the molecular characteristics and lineage origins of these activated cell states and their contribution to cardiac regeneration have been studied, the extracellular signaling and the intrinsic genetic program underlying the activation of the transient functional cell states remain largely unexplored. In this study, we delineated the chromatin landscapes of the noncardiomyocytes (nonCMs) of the regenerating heart at the single-cell level and inferred the cis-regulatory architectures and trans-acting factors that control cell type-specific gene expression programs. Moreover, further motif analysis and cell-specific genetic manipulations suggest that the macrophage-derived inflammatory signal tumor necrosis factor-α, acting via its downstream transcription factor complex activator protein-1, functions cooperatively with discrete transcription regulators to activate respective nonCM cell types critical for cardiac regeneration. Thus, our study defines the regulatory architectures and intercellular communication principles in zebrafish heart regeneration.

Establishment and of preliminary verification of automatic auditing rules for routine coagulation assays / 中国医学装备

Objective:To establish auto verification rules for the routine coagulation assays,and to provide reference for clinical laboratories to improve the quality and efficiency of results verification.Methods:A total of 24,510 specimens of sodium citrate anticoagulation routine coagulation test from the laboratory departments of eight hospitals including the First Medical Center,Chinese PLA General Hospital during January to March 2020 were collected and randomly divided into a rule establishment group and a rule verification group,with 6,670 specimens in the rule establishment group,including 2,056 Delta checks,and 17,840 specimens in the rule validation group,including 3,210 Delta checks.The activities of prothrombin time(PT),activated partial thromboplastin time(APTT),fibrinogen(Fib),thrombin time(TT),D-dimer(DD)and/or antithrombin(AT)were detected by Stago STA R Max automatic coagulation analyzer and supporting reagents.Taking the manual verification results as the standard,the auto verification and manual false negative rate(invalid verification),false positive rate(invalid interception),pass rate,positive coincidence rate,negative coincidence rate,verification consistency rate and specimen turnaround time(TAT)of the two groups were calculated.Results:The auto verification rules and the application process were preliminarily established,including internal quality control,alarm information,auto verification scope,critical value and deviation value inspection.In the rule establishment group,the single item pass rate was 82.6%-92.4%,and the overall pass rate was 73.8%.The consistency rate between auto verification and manual verification was 98.2%,and the positive coincidence rate and negative coincidence rate were 24.4%and 73.8%,respectively.In the rule verification group,the single item pass rate was 86.4%-91.5%,and the overall review pass rate was 71.5%.By simulating the application of auto verification rules,the average TAT of two hospitals among the eight hospitals was shortened by 1.5 hours and 2.1 hours,respectively.Conclusion:The application of auto verification rules can reduce workload of manual verification,and significantly shorten the TAT,and improve the report efficiency of the laboratory.

Unveiling Synergistic Potency: Exploring Butyrolactone I to Enhance Gentamicin Efficacy against Methicillin-Resistant Staphylococcus aureus (MRSA) Strain USA300.

Staphylococcus aureus, including MRSA strains, poses significant health risks, imposing a significant disease burden and mortality. We investigate butyrolactone I (BL-1), a marine-derived metabolite from Aspergillus terreus, enhancing aminoglycoside efficacy against MRSA. A promising synergy is observed with BL-1 and various aminoglycosides, marked by low fractional inhibitory concentration indexes (FICIs < 0.5). Comprehensive studies utilizing USA300 MRSA and gentamicin reveal a remarkable one-fourth reduction in minimum inhibitory concentration (MIC) with 20 µg/mL BL-1. A relative abundance assay indicates that BL-1 enhances gentamicin uptake while restraining extracellular presence, involving intricate transmembrane signaling and molecular interactions. RNA-Seq analysis yielded an unexpected revelation, unveiling a distinctive gene expression profile and distinguishing it from other treatment approaches. Furthermore, meticulous analyses validated the extensive perturbations induced by BL-1 exposure, affecting diverse biological functions, encompassing glycolysis, amino acid metabolisms, substance transmembrane transport, and virulence generation. These valuable insights inspired further confirmation of bacterial virulence and the modulation of membrane permeability resulting from BL-1 treatment. Phenotypic validations corroborated our observations, revealing reduced membrane permeability and hemolytic toxicity, albeit demanding a deeper comprehension of the intricate interplay underlying these actions. Our study contributes crucial mechanistic insights to the development of therapeutic strategies against this notorious pathogen and the judicious employment of aminoglycosides. Additionally, it elucidates marine-derived metabolites' ecological and functional roles, exemplified by fungal quorum sensing signals. These compounds could give producers a competitive edge, inhibiting microorganism proliferation and suggesting novel approaches for combating resistant pathogens.

Unraveling fluorescent mechanism of biomass-sourced carbon dots based on three major components: Cellulose, lignin, and protein.

The complexity of biomass components leads to significant variations in the performance of biomass-based carbon dots (CDs). To shed light on this matter, this study presents a comparative analysis of the fluorescence properties of CDs using pure cellulose, lignin, and protein as models. Three CDs showed different fluorescent properties, resulting from the structure difference and carbonization behavior in the hydrothermal. The relatively gentle thermal degradation of proteins allows the macromolecular structure of amino acids to be preserved. This preservation results in a more regular lattice structure, a larger sp2 domain size, and N-doping, which contribute to the highest quantum yield (QY) of 8.7% of the CDs. In contrast, cellulose undergoes more severe thermal degradation with large amounts of small molecules generated, resulting in the CDs with fewer surface defects, more irregular lattice structures, and lower QY. These results provide a guideline for the design of carbon dots from different biomass.

[Screening and promoting effect of grow-promoting fungi in rhizosphere of Angelica dahurica var. formosana].

Excessive application of chemical fertilizer has caused many problems in Angelica dahurica var. formosana planting, such as yield decline and quality degradation. In order to promote the green cultivation mode of A. dahurica var. formosana and explore rhizosphere fungus resources, the rhizosphere fungi with nitrogen fixation, phosphorus solubilization, potassium solubilization, iron-producing carrier, and IAA-producing properties were isolated and screened in the rhizosphere of A. dahurica var. formosana from the genuine and non-genuine areas, respectively. The strains were identified comprehensively in light of the morphological characteristics and ITS rDNA sequences, and the growth-promoting effect of the screened strains was verified by pot experiment. The results showed that 37 strains of growth-promoting fungi were isolated and screened from the rhizosphere of A. dahurica var. formosana, mostly belonging to Fusarium. The cultured rhizosphere growth-promoting fungi of A. dahurica var. formosana were more abundant and diverse in the genuine producing areas than in the non-genuine producing areas. Among all strains, Aspergillus niger ZJ-17 had the strongest growth promotion potential. Under the condition of no fertilization outdoors, ZJ-17 inoculation significantly promoted the growth, yield, and accumulation of effective components of A. dahurica var. formosana planted in the soil of genuine and non-genuine producing areas, with yield increases of 73.59% and 37.84%, respectively. To a certain extent, it alleviated the restriction without additional fertilization on the growth of A. dahurica var. formosana. Therefore, A. niger ZJ-17 has great application prospects in increasing yield and quality of A. dahurica var. formosana and reducing fertilizer application and can be actually applied in promoting the growth of A. dahurica var. formosana and producing biofertilizer.

Knockdown of Porf-2 restores visual function after optic nerve crush injury.

Retinal ganglion cells (RGCs), the sole output neurons in the eyes, are vulnerable to diverse insults in many pathological conditions, which can lead to permanent vision dysfunction. However, the molecular and cellular mechanisms that contribute to protecting RGCs and their axons from injuries are not completely known. Here, we identify that Porf-2, a member of the Rho GTPase activating protein gene group, is upregulated in RGCs after optic nerve crush. Knockdown of Porf-2 protects RGCs from apoptosis and promotes long-distance optic nerve regeneration after crush injury in both young and aged mice in vivo. In vitro, we find that inhibition of Porf-2 induces axon growth and growth cone formation in retinal explants. Inhibition of Porf-2 provides long-term and post-injury protection to RGCs and eventually promotes the recovery of visual function after crush injury in mice. These findings reveal a neuroprotective impact of the inhibition of Porf-2 on RGC survival and axon regeneration after optic nerve injury, providing a potential therapeutic strategy for vision restoration in patients with traumatic optic neuropathy.

RIPK1 is aberrantly expressed in multiple B-cell cancers and implicated in the underlying pathogenesis.

According to the latest epidemiology of the US, B-cell cancers account for > 3% of all new cancer cases and > 80% of non-Hodgkin lymphomas. However, the disease-modifying small molecular drug suitable for most B-cell cancers is still lacking. RIPK1 (receptor-interacting serine/threonine-protein kinase 1) has been observed to be dysregulated and implicated in the pathogenesis of multiple solid cancers, of which, however, the roles in blood cancers are quite unclear. In our study, to identify multi-function targets for B-cell cancer treatment, we reanalyzed a public transcriptomic dataset from the database of Gene Expression Omnibus, which includes CD19+ B-cell populations from 6 normal donors and patients of 5 CLL, 10 FL, and 8 DLBCL. After overlapping three groups (CLL vs. normal, FL vs. normal, and DLBCL vs. normal) of differentially expressed genes (DEGs), we obtained 69 common DEGs, of which 3 were validated by real-time quantitative PCR, including RIPK3, IGSF3, TGFBI. Interestingly, we found that the loss function of RIPK1 significantly increases the proliferation and viability of GM12878 cells (a normal human B lymphocyte cell line). Consistently, overexpression of RIPK1 in TMD8 and U2932 cells effectively inhibited cell proliferation and growth. More importantly, modifying RIPK1 kinase activity by a small molecule (such as necrostain-1, HOIPIN-1, etc.) alters the cell growth status of B-cell lymphoma, showing that RIPK1 exhibits anti-tumor activity in the context of B-cell lymphoma. Taken together, we consider that RIPK1 may be a potential target in the clinical application of B-cell lymphoma (including CLL, DLBCL, and FL) treatment.

Intravitreal injection of Huperzine A promotes retinal ganglion cells survival and axonal regeneration after optic nerve crush.

Traumatic optic neuropathy (TON) is a condition that causes massive loss of retinal ganglion cells (RGCs) and their axonal fibers, leading to visual insufficiency. Several intrinsic and external factors can limit the regenerative ability of RGC after TON, subsequently resulting in RGC death. Hence, it is important to investigate a potential drug that can protect RGC after TON and enhance its regenerative capacity. Herein, we investigated whether Huperzine A (HupA), extracted from a Chinese herb, has neuroprotective effects and may enhance neuronal regeneration following the optic nerve crush (ONC) model. We compared the three modes of drug delivery and found that intravitreal injection of HupA could promote RGC survival and axonal regeneration after ONC. Mechanistically, HupA exerted its neuroprotective and axonal regenerative effects through the mTOR pathway; these effects could be blocked by rapamycin. To sum up, our findings suggest a promising application of HupA in the clinical treatment of traumatic optic nerve.

Multi-scale cellular PLA-based bionic scaffold to promote bone regrowth and repair.

Large bone defects have presented a significant challenge in orthopedic treatments, and the emergence of tissue-engineered scaffolds has introduced new avenues for treatment. Nonetheless, the clinical application of such scaffolds has been hindered by drawbacks like inadequate mechanical properties, and deficient osteogenesis. Herein, a biocompatible polylactic acid (PLA) based composite was proposed to emulate cancellous bone's morphology by incorporating nano-hydroxyapatite (nHA). In addition, a quantity of Mg2+ and chitosan (CS) as active osteogenic factors were adopted to imitate the bone marrow mesenchymal components in vivo. Using a pre-evaporated solvent and sacrificial multi-template techniques, the cellular PLA-based tissue engineering scaffolds containing macropores larger than 100 µm and micropores smaller than 10 µm were developed. The scaffold's bionic structure, osteogenic active component, and multi-scale cellular make it comparable to cancellous bone, with favorable mechanical properties and hydrophilicity. Vitro tests using Sprague-Dawley (SD) rat bone marrow mesenchymal stem cells (rBMSCs) demonstrated the scaffold's excellent biocompatibility to induce high efficiency of osteogenic differentiation. The bionic porous scaffold with multi-scale cellular structure also can recruit rBMSCs, promote bone regrowth and osteogenic differentiation, and facilitate the regeneration of defective bone tissue for repair. This contribution presented a promising strategy for future advancements in bone tissue engineering.

Ultra-Wide Range, High Sensitivity Piezoresistive Sensor Based on Triple Periodic Minimum Surface Construction.

Flexible piezoresistive sensors with biological structures are widely exploited for high sensitivity and detection. However, the conventional bionic structure pressure sensors usually suffer from irreconcilable conflicts between high sensitivity and wide detection response range. Herein, a triple periodic minimum surface (TPMS) structure sensor is proposed based on parametric structural design and 3D printing techniques. Upon tailoring of the dedicated structural parameters, the resulting sensors exhibit superior compression durability, high sensitivity, and ultra-high detection range, that enabling it meets the needs of various scenes. As a model system, TPMS structure sensor with 40.5% porosity exhibits an ultra-high sensitivity (132 kPa-1 in 0-5.7 MPa), wide detection strain range (0-31.2%), high repeatability and durability (1000 cycles in 4.41 MPa, 10000 s in 1.32 MPa), and low detection limit (1% in 80 kPa). The stress/strain distributions have been identified using finite element analysis. Toward practical applications, the TPMS structural sensors can be applied to detect human activity and health monitoring (i.e., voice recognition, finger pressure, sitting, standing, walking, and falling down behaviors). The synergistic effects of MWCNTs and MXene conductive network also ensure the composite further being utilized for electromagnetic interference shielding applications.

Charge order driven by multiple-Q spin fluctuations in heavily electron-doped iron selenide superconductors.

Intertwined spin and charge orders have been widely studied in high-temperature superconductors, since their fluctuations may facilitate electron pairing; however, they are rarely identified in heavily electron-doped iron selenides. Here, using scanning tunneling microscopy, we show that when the superconductivity of (Li0.84Fe0.16OH)Fe1-xSe is suppressed by introducing Fe-site defects, a short-ranged checkerboard charge order emerges, propagating along the Fe-Fe directions with an approximately 2aFe period. It persists throughout the whole phase space tuned by Fe-site defect density, from a defect-pinned local pattern in optimally doped samples to an extended order in samples with lower Tc or non-superconducting. Intriguingly, our simulations indicate that the charge order is likely driven by multiple-Q spin density waves originating from the spin fluctuations observed by inelastic neutron scattering. Our study proves the presence of a competing order in heavily electron-doped iron selenides, and demonstrates the potential of charge order as a tool to detect spin fluctuations.

Flower-Like Amorphous MoO3- x Stabilized Ru Single Atoms for Efficient Overall Water/Seawater Splitting.

Benefitting from the maximum atom utilization efficiency, special size quantum effects and tailored active sites, single-atom catalysts (SACs) have been promising candidates for bifunctional catalysts toward water splitting. Besides, due to the unique structure and properties, some amorphous materials have been found to possess better performance than their crystalline counterparts in electrocatalytic water splitting. Herein, by combining the advantages of ruthenium (Ru) single atoms and amorphous substrates, amorphous molybdenum-based oxide stabilized single-atomic-site Ru (Ru SAs-MoO3- x /NF) catalysts are conceived as a self-supported electrode. By virtue of the large surface area, enhanced intrinsic activity and fast reaction kinetics, the as-prepared Ru SAs-MoO3- x /NF electrode effectively drives both oxygen evolution reaction (209 mV @ 10 mA cm-2 ) and hydrogen evolution reaction (36 mV @ 10 mA cm-2 ) in alkaline media. Impressively, the assembled electrolyzer merely requires an ultralow cell voltage of 1.487 V to deliver the current density of 10 mA cm-2 . Furthermore, such an electrode also exhibits a great application potential in alkaline seawater electrolysis, achieving a current density of 100 mA cm-2 at a low cell voltage of 1.759 V. In addition, Ru SAs-MoO3- x /NF only has very small current density decay in the long-term constant current water splitting test.