Biomechanical effects of cranial closing wedge osteotomy on joint stability in normal canine stifles: an ex vivo study.

BACKGROUND: Cranial closing wedge osteotomy (CCWO) is a functional stabilisation technique for cranial cruciate ligament (CrCL) ruptures. This biomechanical study aimed to evaluate the influence of CCWO on the stability of the stifle joint. Eighteen Beagle stifle joints were divided into two groups: control and CCWO. The stifle joints were analyzed using a six-degree-of-freedom robotic joint biomechanical testing system. The joints were subjected to 30 N in the craniocaudal (CrCd) drawer and proximal compression tests and 1 Nm in the internal-external (IE) rotation test. Each test was performed with an extension position, 135°, and 120° of joint angle. RESULTS: The stifle joints were tested while the CrCLs were intact and then transected. In the drawer test, the CCWO procedure, CrCL transection, and stifle joint flexion increased CrCd displacement. The CCWO procedure and CrCL transection showed an interaction effect. In the compression test, the CCWO procedure decreased and CrCL transection and stifle joint flexion increased displacement. In the IE rotation test, CCWO, CrCL transection, and stifle joint flexion increased the range of motion. CONCLUSIONS: CCWO was expected to provide stability against compressive force but does not contribute to stability in the drawer or rotational tests. In the CCWO-treated stifle joint, instability during the drawer test worsened with CrCL transection. In other words, performing the CCWO procedure when the CrCL function is present is desirable for stabilizing the stifle joint.

Repair of osteochondral defects: efficacy of a tissue-engineered hybrid implant containing both human MSC and human iPSC-cartilaginous particles.

Both mesenchymal stromal cells (MSC) and induced pluripotent stem cells (iPSC) offer the potential for repair of damaged connective tissues. The use of hybrid implants containing both human MSC and iPSC was investigated to assess their combined potential to yield enhanced repair of osteochondral defects. Human iPSC-CP wrapped with tissue engineered constructs (TEC) containing human MSC attained secure defect filling with good integration to adjacent tissue in a rat osteochondral injury model. The presence of living MSC in the hybrid implants was required for effective biphasic osteochondral repair. Thus, the TEC component of such hybrid implants serves several critical functions including, adhesion to the defect site via the matrix and facilitation of the repair via live MSC, as well as enhanced angiogenesis and neovascularization. Based on these encouraging studies, such hybrid implants may offer an effective future intervention for repair of complex osteochondral defects.

The function of cruciate ligaments in bi-cruciate retaining Total knee arthroplasty with asymmetrical design.

BACKGROUND: Bi-cruciate retaining total knee arthroplasty with an asymmetrical design may improve knee function and clinical outcomes. This study aimed to compare the kinematics, anteroposterior laxity, and in situ forces of the anterior and posterior cruciate ligaments of knees subjected to this treatment with those of healthy knees. METHODS: Seven fresh-frozen cadaveric knees were tested using a robotic/universal force-moment sensor system. The kinematics during passive flexion-extension motion and anteroposterior laxity for native knee, treated knee, and treated knee with cruciate ligament transection states were investigated. The motions of the intact and treated knees during each test were repeated after anterior/posterior cruciate ligament transection to calculate the in situ force in the ligaments. FINDINGS: The screw-home movement of normal knees disappeared after treatment. The in situ force of the anterior cruciate ligament in treated knees was higher than that in intact knees at ˃15° during flexion and at 60° and 90° against an anterior force. The in situ force of the posterior cruciate ligament in treated knees was higher at 0°, 15°, and 30° during flexion and at all flexion angles against a posterior force. INTERPRETATION: The screw-home movement of normal knees decreased, and the in situ force of the anterior and posterior cruciate ligaments increased after treatment.

Guideline for design of substrate stiffness for mesenchymal stem cell culture based on heterogeneity of YAP and RUNX2 responses.

Mesenchymal stem cells (MSCs) have the potential for self-renewal and multipotency to differentiate into various lineages. Thus, they are of great interest in regenerative medicine as a cell source for tissue engineering. Substrate stiffness is one of the most extensively studied exogenous physical factors; however, consistent results have not always been reported for controlling MSCs. Conventionally used stiff culture substrates, such as tissue-culture polystyrene and glass, enhance nuclear localization of a mechanotransducer YAP and a pre-osteogenic transcription factor RUNX2, and bias MSCs towards the osteogenic lineage, even without osteogenic-inducing soluble factors. The mechanosensitive nature and intrinsic heterogeneity present challenges for obtaining reproducible results. This review summarizes the heterogeneity in human MSC response, specifically, nuclear/cytoplasmic localization changes in the mechanotransducer yes-associated protein (YAP) and the osteogenic transcription factor RUNX2, in response to substrate stiffness. In addition, a perspective on the intracellular factors attributed to response heterogeneity is discussed. The optimal range of stiffness parameters, Young's modulus, for MSC expansion culture to suppress osteogenic differentiation bias through the suppression of YAP and RUNX2 nuclear localization, and cell cycle progression is likely to be surprisingly narrow for a cell population from an identical donor and vary among cell populations from different donors. We believe that characterization of the heterogeneity of MSCs and understanding their biological meaning is an exciting research direction to establish guidelines for the design of culture substrates for the sophisticated control of MSC properties.

A Biomechanical Comparison of 2 Over-the-Top Anterior Cruciate Ligament Reconstruction Techniques: A Cadaveric Study Using a Robotic Simulator.

Background: For skeletally immature patients, over-the-top (OTT) anterior cruciate ligament (ACL) reconstruction (ACLR) is preferred. However, increased anterior laxity at deep knee flexion angles remains concerning. We modified the procedure to proximally shift the graft fixation site on the femur to prevent graft loosening at higher knee flexion angles and named it the supra-OTT procedure. Purpose: To compare anterior laxity and in situ forces of the ACL graft between conventional OTT and supra-OTT ACLR in a cadaveric model. Study Design: Controlled laboratory study. Methods: A total of 11 fresh-frozen cadaveric knee specimens underwent 4 robotic testing conditions: ACL intact, ACL resected, conventional OTT, and supra-OTT. For each condition, a 100-N load was applied at 0°, 15°, 30°, 60°, and 90° of knee flexion to simulate the Lachman test or anterior drawer test. In addition, a combined load of 5-N·m internal tibial torque and 10-N·m valgus torque was applied at 15° and 30° of knee flexion as a simulated pivot-shift test. Anterior tibial translation and in situ graft forces were recorded. The only difference between conventional OTT and supra-OTT ACLR was the graft fixation site on the femur. For conventional OTT ACLR, graft fixation was performed just on the proximal and lateral ends of the posterior condyle. For supra-OTT ACLR, the fixation point was around the proximal insertion of the lateral head of the gastrocnemius and the lateral edge of the posterior cortex, approximately 2 cm proximal to the conventional OTT position. Results: On the simulated anterior drawer test at 60° and 90° of knee flexion, anterior tibial translation after supra-OTT ACLR was significantly smaller than after conventional OTT ACLR (P < .01). However, no significant differences were noted at other flexion angles or on the simulated pivot-shift test between the conventional OTT and supra-OTT procedures. Some overconstraint and higher graft forces were noted with both techniques, but the supra-OTT technique caused even more overconstraint at higher flexion angles. Conclusion: Supra-OTT ACLR showed better biomechanical performance to control anterior laxity than conventional OTT ACLR at higher knee flexion angles. Clinical Relevance: The supra-OTT procedure may improve anterior stability at deep knee flexion angles.

The Role of the Medial Meniscus in Anterior Knee Stability.

Background: Few studies have compared the force distribution between the anterolateral, posterolateral, and medial structures of the knee. Purpose: To investigate the important structures in an intact knee contributing to force distribution in response to anterior tibial load. Study Design: Controlled laboratory study. Methods: Nine fresh-frozen cadaveric knee specimens underwent robotic testing. First, 100 N of anterior tibial load was applied to the intact knee at 0°, 15°, 30°, 60°, and 90° of knee flexion. The anterior cruciate ligament (ACL), anterolateral capsule, lateral collateral ligament, popliteal tendon, posterior root of the lateral meniscus, superficial medial collateral ligament, posterior root of the medial meniscus (MM), and posterior cruciate ligament were then completely transected in sequential order. After each transection, the authors reproduced the intact knee motion when a 100-N anterior tibial load was applied. By applying the principle of superposition, the resultant force of each structure was determined based on the 6 degrees of freedom force/torque data of each state. Results: At every measured knee flexion angle, the resultant force of the ACL was the largest of the tested structures. At knee flexion angles of 60° and 90°, the resultant force of the MM was larger than that of all other structures with the exception of the ACL. Conclusion: The MM was identified as playing an important role in response to anterior tibial load at 60° and 90° of flexion. Clinical Relevance: In clinical settings, the ACL of patients with a poorly functioning MM, such as tear of the MM posterior root, should be monitored considering the large resultant force in response to an anterior tibial load.

Effect of Anterior Horn Tears of the Lateral Meniscus on Knee Stability.

Background: Investigations on the biomechanical characteristics of the anterior horn of the lateral meniscus (AHLM) related to anterior cruciate ligament (ACL) tibial tunnel reaming have revealed increased contact pressure between the femur and tibia, decreased attachment area, and decreased ultimate failure strength. Purpose/Hypothesis: The purpose of this study was to investigate the influence of a complete radial tear of the AHLM on force distribution in response to applied anterior and posterior drawer forces and internal and external rotation torques. We hypothesized that the AHLM plays an important role in knee stability, primarily at lower knee flexion angles. Study Design: Controlled laboratory study. Methods: A total of 9 fresh-frozen cadaveric knee specimens and a robotic testing system were used. Anterior and posterior drawer forces up to 89 N and internal and external rotation torques up to 4 N·m were applied at 0°, 30°, 60°, and 90° of knee flexion. A complete AHLM tear was then made 10 mm from the lateral border of the tibial attachment of the ACL, and the same tests performed in the intact state were repeated. Next, the recorded intact knee motion was reproduced in the AHLM-torn knee, and the change in the resultant force after an AHLM tear was determined by calculating the difference between the 2 states. Results: In the torn AHLM, the reduction in the resultant force at 0° for external rotation torque (34.8 N) was larger than that at 60° (5.2 N; P < .01) and 90° (6.7 N; P < .01). Conclusion: The AHLM played a role in facilitating knee stability against an applied posterior drawer force of 89 N and external rotation torque of 4 N·m, especially at lower knee flexion angles. Clinical Relevance: This study provides information about the effects of AHLM injuries that may occur during single-bundle ACL reconstruction using a round tunnel.

Influence of tibial plateau levelling osteotomy on the tensile forces sustained by ligaments in cranial cruciate ligament-intact canine stifles: An ex vivo pilot study.

BACKGROUND: Tibial plateau levelling osteotomy (TPLO) changes the anatomical tibial conformation and might alter the positional relationship of the ligaments comprising the stifle joint. As a result, it is expected to affect the tensile force of the ligaments. However, studies analyzing the details of the effect of osteotomy are limited. OBJECTIVES: To evaluate the influence of TPLO on the tensile force on the stifle ligaments in the intact canine stifle using a six-degree-of-freedom (6-DOF) robotic testing system. METHODS: Eight stifles were categorised into the reference group and nine stifles into the TPLO group. The stifles were then analysed using a 6-DOF robotic joint biomechanical testing system. The stifles were applied 30 N at cranial, caudal, and compression loads and 1 Nm at the internal and external torque loads (the load applied to the tibia relative to the femur) on extension, at 135° and 120°, respectively. The tensile force placed on the cranial cruciate ligament (CrCL), the caudal cruciate ligament, the medial collateral ligament, lateral collateral ligament and the total tensile force placed on the four ligaments was calculated under each load. RESULTS: For the caudal load applied to the tibia relative to the femur, the CrCL tensile force in the TPLO group was lower than that in the reference group at 120° (p = 0.02). The CrCL tensile force in the TPLO group was lower than that in the reference group at 120° (p < 0.01) for the compression load. Regarding the cranial, internal, and external load, the CrCL tensile force remains unchanged between both groups at each angle. CONCLUSIONS: TPLO reduces CrCL tensile force during compression and caudal force application. TPLO may reduce tensile forces contributing to CrCL rupture.

A Compressed Collagen Construct for Studying Endothelial-Smooth Muscle Cell Interaction Under High Shear Stress.

The coculture of vascular endothelial cells (ECs) on collagen gels containing smooth muscle cells (SMCs) has been carried out to investigate cellular interactions associated with blood vessel pathophysiology under wall shear stress (WSS) conditions. However, due to a lack of gel stiffness, the previous collagen gel coculture constructs are difficult to use for pathologic higher WSS conditions. Here, we newly constructed a coculture model with centrifugally compressed cell-collagen combined construct (C6), which withstands higher WSS conditions. The elastic modulus of C6 was approximately 6 times higher than that of the uncompressed collagen construct. The level of α-smooth muscle actin, a contractile SMC phenotype marker observed in healthy arteries, was elevated in C6 compared with that of the uncompressed construct, and further increased by exposure to a physiological level WSS of 2 Pa, but not by a pathological level of 20 Pa. WSS conditions of 2 and 20 Pa also induced different expression ratios of matrix metalloproteinases and their inhibitors in the C6 coculture model but did not in monocultured ECs and SMCs. The C6 coculture model will be a powerful tool to investigate interactions between ECs and SMCs under pathologically high WSS conditions.

Human iPS cell-derived cartilaginous tissue spatially and functionally replaces nucleus pulposus.

The loss of nucleus pulposus (NP) precedes the intervertebral disk (IVD) degeneration that causes back pain. Here, we demonstrate that the implantation of human iPS cell-derived cartilaginous tissue (hiPS-Cart) restores this loss by replacing lost NP spatially and functionally. NP cells consist of notochordal NP cells and chondrocyte-like NP cells. Single cell RNA sequencing (scRNA-seq) analysis revealed that cells in hiPS-Cart corresponded to chondrocyte-like NP cells but not to notochordal NP cells. The implantation of hiPS-Cart into a nuclectomized space of IVD in nude rats prevented the degeneration of the IVD and preserved its mechanical properties. hiPS-Cart survived and occupied the nuclectomized space for at least six months after implantation, indicating spatial and functional replacement of lost NP by hiPS-Cart. Further scRNA-seq analysis revealed that hiPS-Cart cells changed their profile after implantation, differentiating into two lineages that are metabolically distinct from each other. However, post-implanted hiPS-Cart cells corresponded to chondrocyte-like NP cells only and did not develop into notochordal NP cells, suggesting that chondrocyte-like NP cells are nearly sufficient for NP function. The data collectively indicate that hiPS-Cart is a candidate implant for regenerating NP spatially and functionally and preventing IVD degeneration.

Effects of the Ankle Flexion Angle During Anterior Talofibular Ligament Reconstruction on Ankle Kinematics, Laxity, and In Situ Forces of the Reconstructed Graft.

BACKGROUND: This study aimed to evaluate the effects of the ankle flexion angle during anterior talofibular ligament (ATFL) reconstruction on ankle kinematics, laxity, and in situ force of a graft. METHODS: Twelve cadaveric ankles were evaluated using a 6-degrees of freedom robotic system to apply passive plantar flexion and dorsiflexion motions and multidirectional loads. A repeated measures experiment was designed using the intact ATFL, transected ATFL, and reconstructed ATFL. During ATFL reconstruction (ATFLR), the graft was fixed at a neutral position (ATFLR 0 degrees), 15 degrees of plantar flexion (ATFLR PF15 degrees), and 30 degrees of plantar flexion (ATFLR PF30 degrees) with a constant initial tension of 10 N. The 3-dimensional path and reconstructed graft tension were simultaneously recorded, and the in situ force of the ATFL and reconstructed grafts were calculated using the principle of superposition. RESULTS: The in situ forces of the reconstructed grafts in ATFLR 0 degrees and ATFLR PF 15 degrees were significantly higher than those of intact ankles. The ankle kinematics and laxity produced by ATFLR PF 30 degrees were not significantly different from those of intact ankles. The in situ force on the ATFL was 19.0 N at 30 degrees of plantar flexion. In situ forces of 41.0, 33.7, and 21.9 N were observed at 30 degrees of plantar flexion in ATFLR 0, 15, and 30 degrees, respectively. CONCLUSION: ATFL reconstruction with the peroneus longus (PL) tendon was performed with the graft at 30 degrees of plantar flexion resulted in ankle kinematics, laxity, and in situ forces similar to those of intact ankles. ATFL reconstructions performed with the graft fixed at 0 and 15 degrees of the plantar flexion resulted in higher in situ forces on the reconstructed graft. CLINICAL RELEVANCE: Fixing the ATFL tendon graft at 30 degrees of plantar flexion results in an in situ force closest to that of an intact ankle and avoids the excessive tension on the reconstructed graft.

Function of the crocodilian anterior cruciate ligaments.

The anterior cruciate ligament (ACL) is an important knee stabilizer that prevents the anterior subluxation of the tibia. Extant crocodiles have two ACLs, the ACL major and minor, yet their functional roles are unclear. We here examined in-situ forces within the ACL major and minor in saltwater crocodiles (Crocodylus porosus) with a 6-degree-of-freedom robotic testing system under the following loading conditions: (a) 30 N anterior tibial load at 150°, 120°, and 90° knee extension; (b) 1 Nm internal/external torque at 150° and 120° knee extension; (c) 30 N anterior tibial load +1 Nm internal/external torque at 150° and 120° knee extension. The In-situ force in the ACL minor was significantly higher than that of the ACL major in response to anterior tibial load at 90° knee extension, and anterior tibial load + external torque at both 150° and 120° knee extension. Meanwhile, the force in the ACL major was significantly higher than that of the ACL minor in response to internal torque at 120° knee extension, and anterior tibial load + internal torque at 150° knee extension. The present results showed that the ACL minor and major of saltwater crocodiles have different functions. In response to anterior tibial load + internal/external torques, either of two ACLs reacted to opposing directions of knee rotation. These suggest that two ACLs are essential for walking with long axis rotation of the knee in crocodiles.

Investigation of the effects of excessive tibial plateau angle and changes in load on ligament tensile forces in the stifle joints of dogs.

OBJECTIVE: To investigate the effect of an excessive tibial plateau angle (TPA) and change in compressive load on tensile forces experienced by the cranial cruciate, medial collateral, and lateral collateral ligaments (CCL, MCL, and LCL, respectively) of canine stifle joints. SAMPLE: 16 cadaveric stifle joints from 16 orthopedically normal Beagles. PROCEDURES: Stifle joints were categorized into unchanged (mean TPA, 30.4°) and excessive (mean TPA before and after modification, 31.2° and 41.1°, respectively) TPA groups. The excessive TPA group underwent a TPA-increasing procedure (curvilinear osteotomy of the proximal aspect of the tibia) to achieve the desired TPA. A robotic system was used to apply a 30- and 60-N compressive load to specimens. The craniomedial band of the CCL, caudolateral band of the CCL, MCL, and LCL were sequentially transected; load application was repeated after each transection. Orthogonal force components were measured in situ. Forces on ligaments were calculated after repeated output force measurements as the contribution of each component was eliminated. RESULTS: Increasing the compressive load increased tensile forces on the craniomedial and caudolateral bands of the CCL, but not on the MCL or LCL, in specimens of both groups. At the 60-N load, tensile force on the craniomedial band, but not other ligaments, was greater for the excessive TPA group than for the unchanged TPA group. CONCLUSIONS AND CLINICAL RELEVANCE: Results indicated that stress on the CCL may increase when the compressive load increases. The TPA-increasing procedure resulted in increased tensile force on the CCL at a 60-N compressive load without affecting forces on the MCL or LCL.

Designing Elastic Modulus of Cell Culture Substrate to Regulate YAP and RUNX2 Localization for Controlling Differentiation of Human Mesenchymal Stem Cells.

To establish a guideline for the design of cell culture substrates to control human mesenchymal stem cell (MSC) differentiation, we quantitatively characterized the heterogeneity in the responsiveness of MSCs to the elastic modulus of culture substrates. We analyzed the elastic modulus-dependent dynamics of a mechanotransducer, YAP, and an osteogenic differentiation factor, RUNX2, in three different MSC lots using a styrenated gelatin gel with controllable elastic modulus. The percentage of cells with YAP in the nucleus increased linearly with increases in the elastic modulus, reaching a plateau at 10 kPa for all the lots analyzed. The increase in the percentage with the substrate elastic modulus was described by the same linear function. The percentage of cells with RUNX2 nuclear localization also increased linearly with increases in the substrate elastic modulus, plateauing at 5 kPa, although the regression lines to the linearly increasing regions varied between lots. These similarities and differences in YAP and RUNX2 dynamics among cell populations are basis to design the substrate elastic modulus to manipulate YAP and RUNX2 localizations.

Different effects of the lateral meniscus complete radial tear on the load distribution and transmission functions depending on the tear site.

PURPOSE: To compare the effect of the lateral meniscus (LM) complete radial tear at different tear sites on the load distribution and transmission functions. METHODS: A compressive load of 300 N was applied to the intact porcine knees (n = 30) at 15°, 30°, 60°, 90°, and 120° of flexion. The LM complete radial tears were created at the middle portion (group M), the posterior portion (group P), or the posterior root (group R) (n = 10, each group), and the same loading procedure was followed. Finally, the recorded three-dimensional paths were reproduced on the LM-removed knees. The peak contact pressure (contact area) in the lateral compartment and the calculated in situ force of the LM under the principle of superposition were compared among the four groups (intact, group M, group P, and group R). RESULTS: At all the flexion angles, the peak contact pressure (contact area) was significantly higher (lower) after creating the LM complete radial tear as compared to that in the intact state (p < 0.01). At 120° of flexion, group R represented the highest peak contact pressure (lowest contact area), followed by group P and group M (p < 0.05). The results of the in situ force carried by the LM were similar to those of the tibiofemoral contact mechanics. CONCLUSION: The detrimental effect of the LM complete radial tear on the load distribution and transmission functions was greatest in the posterior root tear, followed by the posterior portion tear and the middle portion tear in the deep-flexed position. Complete radial tars of the meniscus, especially at the posterior root, should be repaired to restore the biomechanical function.

Reduction of in situ force through the meniscus with phased inner resection of medial meniscus: an experimental study in a porcine model.

PURPOSE: Partial meniscectomy can cause osteoarthritic changes in knees, as inner portion as well as peripheral portion of meniscus is important. The hypothesis of this study was that the amount of the inner resection of medial meniscus affected the in situ forces through the meniscus and the tibial varus and external rotation under axial load. METHODS: Fourteen intact porcine knees were investigated with a six-degree of freedom robotic system and force/moment, and the three-dimensional path of intact knees were recorded by universal force sensor when an axial load of 300-N was applied at four different flexion angles (30°, 60°, 90°, and 120°). The same examination was performed on three phased inner resections (30%, 60%, and 90% width) of the medial meniscus. Finally, all paths were reproduced after total medial meniscectomy, and in situ forces of the medial meniscus were calculated based on the superposition principle. Changes in tibiofemoral varus/valgus and internal/external rotation alignment during an axial load were also calculated. RESULTS: In situ forces of the medial meniscus decreased according to the amount of meniscal resection at all flexion angles. The reduction was significant in knees with inner resections of > 60% width at all flexion angles and even of 30% width at a flexion angle of 120° (p < .05). Incremental changes in the tibiofemoral varus alignment increased depending on the inner resection width at all flexion angles (p < .05). CONCLUSION: The amount of inner resection of the medial meniscus was related to reduction of its in situ forces and increment of the tibial varus rotation under axial load.

Biomechanical Effects of Tibial Plateau Levelling Osteotomy on Joint Instability in Normal Canine Stifles: An In Vitro Study.

OBJECTIVE: The aim of the study was to determine the changes in biomechanical characteristics following tibial plateau levelling osteotomy (TPLO) using simulated manual tests. STUDY DESIGN: Twenty-one stifles from healthy Beagle dogs that had undergone TPLO or had not (control) were first tested in the intact form, and then the cranial cruciate ligament (CrCL) was transected in each to provide four test situations: control-intact, control-CrCL-transected, TPLO-intact and TPLO-CrCL-transected. The stifles were then analysed using a robotic joint biomechanical testing system. The craniocaudal drawer, axial rotation and proximal compression tests were applied. RESULTS: The craniocaudal displacement during the drawer test was not significantly different between the control-intact and TPLO-intact. However, the displacement was significantly greater in the TPLO-CrCL-transected than in the control-intact. In the axial rotation test, the internal-external (IE) rotation was significantly greater in the TPLO-intact than in the control-intact. Similarly, the IE rotation was significantly greater in the TPLO-CrCL-transected than in the control-CrCL-transected. In the proximal compression test, craniocaudal displacement was not significantly different among the control-intact, TPLO-intact and TPLO-CrCL-transected. CONCLUSION: These findings suggest that TPLO influences the tension of the collateral ligaments and might generate laxity of the tibiofemoral joint. Instability after the osteotomy might be associated with the progression of osteoarthritis.

Effect of Initial Graft Tension During Anterior Talofibular Ligament Reconstruction on Ankle Kinematics, Laxity, and In Situ Forces of the Reconstructed Graft.

BACKGROUND: Although a variety of surgical procedures for anterior talofibular ligament (ATFL) reconstruction have been reported, the effect of initial graft tension during ATFL reconstruction remains unclear. PURPOSE/HYPOTHESIS: This study investigated the effects of initial graft tension on ATFL reconstruction. We hypothesized that a high degree of initial graft tension would cause abnormal kinematics and laxity. STUDY DESIGN: Controlled laboratory study. METHODS: Twelve cadaveric ankles were tested with a robotic system with 6 degrees of freedom to apply passive plantarflexion and dorsiflexion motions and a multidirectional load. A repeated measures experiment was designed with the intact ATFL, transected ATFL, and reconstructed ATFL at initial tension conditions of 10, 30, 50, and 70 N. The 3-dimensional path and reconstructed graft tension were simultaneously recorded, and the in situ forces of the ATFL and reconstructed graft were calculated with the principle of superposition. RESULTS: Initial tension of 10 N was sufficient to imitate normal ankle kinematics and laxity, which were not significantly different when compared with those of the intact ankles. The in situ force on the reconstructed graft tended to increase as the initial tension increased. In situ force on the reconstructed graft >30 N was significantly greater than that of intact ankles. The in situ force on the ATFL was 19 N at 30° of plantarflexion. In situ forces of 21.9, 30.4, 38.2, and 46.8 N were observed at initial tensions of 10, 30, 50, and 70 N, respectively, at 30° of plantarflexion. CONCLUSION: Approximate ankle kinematic patterns and sufficient laxity, even with an initial tension of 10 N, could be obtained immediately after ATFL reconstruction. Moreover, excessive initial graft tension during ATFL reconstruction caused excessive in situ force on the reconstructed graft. CLINICAL RELEVANCE: This study revealed the effects of initial graft tension during ATFL reconstruction. These data suggest that excessive tension during ATFL reconstruction should be avoided to ensure restoration of normal ankle motion.

Analysis of passive tibio-femoral joint movement of Beagle dogs during flexion in cadaveric hind limbs without muscle.

The aim of this study was to evaluate the normal range of motion of the canine tibiofemoral joint and the movement of the tibia relative to the femur, especially the internal/external rotation under flexion. Right stifle joints were harvested from eight skeletally mature Beagle dogs, which were euthanized for reasons unrelated to this study. All muscle tissue was removed from the limbs prior to testing. Flexion and extension tests were conducted using a robotic manipulator with six degrees-of-freedom. Cranial/caudal and medial/lateral displacement and varus/valgus and internal/external rotation were measured at various degrees of flexion. We observed that the tibia rotated internally at an increasing flexion angle with mean peak internal and external rotations of 20.0 ± 13.8° and 4.5 ± 3.6°, respectively. The tibia also tended to displace cranially at an increasing flexion angle, with a mean peak cranial displacement of 8.9 ± 4.4 mm; there was minimal medial displacement when increasing the flexion angle. Valgus rotation also tended to occur at an increasing flexion angle. During the flexion of the canine stifle joint, approximately 20° of internal tibial rotation occurred around the longitudinal axis, along with a rollback motion involving the cranial displacement of the tibia.

A longitudinal tear in the medial meniscal body decreased the in situ meniscus force under an axial load.

PURPOSE: To clarify the effect of longitudinal tears of the medial meniscus on the in situ meniscus force and the tibiofemoral relationship under axial load. METHODS: Twenty-one intact porcine knees were mounted on a 6-degrees of freedom robotic system, and the force and three-dimensional path of the knee joints were recorded during three cycles under a 250-N axial load at 30°, 60°, 90° and 120° of knee flexion. They were divided into three groups of seven knees with longitudinal tears in the middle to the posterior segment of the medial meniscus based on the tear site: rim, outer one-third and inner one-third of the meniscal body. After creating tears, the same tests were performed. Finally, all paths were reproduced after total medial meniscectomy, and the in situ force of the medial meniscus was calculated based on the principle of superposition. RESULTS: With a longitudinal tear, the in situ force of the medial meniscus was significantly decreased at 60°, 90° and 120° of knee flexion, regardless of the tear site. The decrement was greater with a tear in the meniscal body than a tear in the rim. A longitudinal tear in the meniscal body caused a significantly greater tibial varus rotation than a tear in the rim at all flexion angles. CONCLUSION: Longitudinal tears significantly decreased the in situ force of the medial meniscus. Tears in the meniscal body caused a larger decrease of the in situ meniscus force and greater varus tibial rotation than tears in the rim.