A threshold model of plastic waste fragmentation: New insights into the distribution of microplastics in the ocean and its evolution over time.

Plastic pollution in the aquatic environment has been assessed for many years by ocean waste collection expeditions around the globe or by river sampling. While the total amount of plastic produced worldwide is well documented, the amount of plastic found in the ocean, the distribution of particles on its surface and its evolution over time are still the subject of much debate. In this article, we propose a general fragmentation model, postulating the existence of a critical size below which particle fragmentation becomes extremely unlikely. In the frame of this model, an abundance peak appears for sizes around 1 mm, in agreement with real environmental data. Using, in addition, a realistic exponential waste feed to the ocean, we discuss the relative impact of fragmentation and feed rates, and the temporal evolution of microplastics (MP) distribution. New conclusions on the temporal trend of MP pollution are drawn.

DNA Ploidy as a Potential Adjunct Prognostic Marker of Low-Risk Prostate Cancer Progression after Radical Prostatectomy.

PURPOSE: Post prostatectomy PSA kinetics and General Grade Groups (GGG) are the strongest prognostic markers of biochemical recurrence (BCR) and prostate cancer (PCa)-specific mortality after radical prostatectomy. Despite having low-risk PCa, some patients will experience BCR, for some, clinically significant BCR. There is a need for an objective prognostic marker at the time of prostatectomy to improve risk stratification within this population. In this study, we investigated the prognostic potential of DNA ploidy. MATERIALS AND METHODS: Prostatectomy samples from 97 patients with GGG1 and GGG2 with a low-risk CAPRA-S score were included in this study. PCa tissue with the worst Gleason pattern underwent tissue disaggregation, cell isolation and staining with a DNA stoichiometric stain. Using image cytometry, DNA ploidy was measured and a Ploidy Score (PS) was generated. RESULTS: Among the 97 patients, 79 had no BCR, 18 experienced BCR, of which 14 had a PSA doubling time (PSA-DT) >1 year (low-risk group) and 4 had a PSA-DT of <1 year (high-risk group). Using Logistic regression analysis, only pathological T stage (pT) and PS independently predicted BCR with PS being the most significant (p = 0.001). The number of aneuploid cells was significantly higher in the high-risk group compared to the other groups (p = 1.7x10-11). PS combined with GGG diagnosis further stratified risk groups of biochemical recurrence free survival within CAPRA-S low-risk cohort. CONCLUSION: DNA ploidy is an independent prognostic marker of BCR in low-risk PCa after radical prostatectomy, which could early on identify potentially aggressive PCa recurrences and introduce a more personalized approach to salvage treatments.

Discussion about suitable applications for biodegradable plastics regarding their sources, uses and end of life.

This opinion paper offers a scientific view on the current debate of the place of biodegradable plastics as part of the solution to deal with the growing plastic pollution in the world's soil, aquatic, and marine compartments. Based on the current scientific literature, we focus on the current limits to prove plastic biodegradability and to assess the toxicity of commercially used biobased and biodegradable plastics in natural environments. We also discuss the relevance of biodegradable plastics for selected applications with respect to their use and end of life. In particular, we underlined that there is no universal biodegradability of plastics in any ecosystem, that considering the environment as a waste treatment system is not acceptable, and that the use of compostable plastics requires adaptation of existing organic waste collection and treatment channels.

Bridging steady-state and stick-slip fracture propagation in glassy polymers.

Both an experimental and a theoretical investigation of fracture propagation mechanisms acting at the process zone scale in glassy polymers are presented. The main aim is to establish a common modeling for different kinds of glassy polymers presenting either steady-state fracture propagation or stick-slip fracture propagation or both, depending on loading conditions and sample shapes. From the experimental point of view, new insights are provided by the in situ AFM measurements of viscoplastic strain fields acting within the micrometric process zone in a brittle epoxy resin, which highlight an extremely slow unexpected steady-state regime with finite plastic strains of about 30% around a blunt crack tip, accompanied by propagating shear lips. From the theoretical point of view, we apply to glassy polymers some recently developed models for describing soft dissipative fracture that are pertinent with the observed finite strains. We propose a unified modeling of fracture energy for both the steady-state and stick-slip fracture propagation based on the evaluation of energy dissipation density at a characteristic strain rate induced in the process zone by a competition between the crack propagation velocity and the macroscopic sample loading rate.

Microstructure Characterization of Oceanic Polyethylene Debris.

Plastic pollution has become a worldwide concern. It was demonstrated that plastic breaks down to nanoscale particles in the environment, forming so-called nanoplastics. It is important to understand their ecological impact, but their structure is not elucidated. In this original work, we characterize the microstructure of oceanic polyethylene debris and compare it to the nonweathered objects. Cross sections are analyzed by several emergent mapping techniques. We highlight deep modifications of the debris within a layer a few hundred micrometers thick. The most intense modifications are macromolecule oxidation and a considerable decrease in the molecular weight. The adsorption of organic pollutants and trace metals is also confined to this outer layer. Fragmentation of the oxidized layer of the plastic debris is the most likely source of nanoplastics. Consequently the nanoplastic chemical nature differs greatly from plastics.

Relative Influence of Plastic Debris Size and Shape, Chemical Composition and Phytoplankton-Bacteria Interactions in Driving Seawater Plastisphere Abundance, Diversity and Activity.

The thin film of life that inhabits all plastics in the oceans, so-called "plastisphere," has multiple effects on the fate and impacts of plastic in the marine environment. Here, we aimed to evaluate the relative influence of the plastic size, shape, chemical composition, and environmental changes such as a phytoplankton bloom in shaping the plastisphere abundance, diversity and activity. Polyethylene (PE) and polylactide acid (PLA) together with glass controls in the forms of meso-debris (18 mm diameter) and large-microplastics (LMP; 3 mm diameter), as well as small-microplastics (SMP) of 100 µm diameter with spherical or irregular shapes were immerged in seawater during 2 months. Results of bacterial abundance (confocal microscopy) and diversity (16S rRNA Illumina sequencing) indicated that the three classical biofilm colonization phases (primo-colonization after 3 days; growing phase after 10 days; maturation phase after 30 days) were not influenced by the size and the shape of the materials, even when a diatom bloom (Pseudo-nitzschia sp.) occurred after the first month of incubation. However, plastic size and shape had an effect on bacterial activity (3H leucine incorporation). Bacterial communities associated with the material of 100 µm size fraction showed the highest activity compared to all other material sizes. A mature biofilm developed within 30 days on all material types, with higher bacterial abundance on the plastics compared to glass, and distinct bacterial assemblages were detected on each material type. The diatom bloom event had a great impact on the plastisphere of all materials, resulting in a drastic change in diversity and activity. Our results showed that the plastic size and shape had relatively low influence on the plastisphere abundance, diversity, and activity, as compared to the plastic composition or the presence of a phytoplankton bloom.

An experimental and theoretical study of the erosion of semi-crystalline polymers and the subsequent generation of microparticles.

The increase of plastics and microplastics in the environment is a major environmental challenge. Still, little is known about the degradation kinetics of macroplastics into smaller particles, under the joint actions of micro-organisms and physico-chemical factors, like UV or mechanical constraints. In order to gain insight into (bio)-degradation in various media, we perform accelerated erosion experiments by using a well-known enzymatic system. We show that the microstructure of semi-crystalline polymers plays a crucial role in the pattern formation at their surface. For the first time, the release of fragments of micrometric size is evidenced, through a mechanism that does not involve fracture propagation. A geometric erosion model allows a quantitative understanding of erosion rates and surface patterns, and provides a critical heterogeneity size, parting two types of behavior: spherulites either released, or eroded in situ. This new geometric approach could constitute a useful tool to predict the erosion kinetics and micro-particle generation in various media.

Colonization of Non-biodegradable and Biodegradable Plastics by Marine Microorganisms.

Plastics are ubiquitous in the oceans and constitute suitable matrices for bacterial attachment and growth. Understanding biofouling mechanisms is a key issue to assessing the ecological impacts and fate of plastics in marine environment. In this study, we investigated the different steps of plastic colonization of polyolefin-based plastics, on the first one hand, including conventional low-density polyethylene (PE), additivated PE with pro-oxidant (OXO), and artificially aged OXO (AA-OXO); and of a polyester, poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), on the other hand. We combined measurements of physical surface properties of polymers (hydrophobicity and roughness) with microbiological characterization of the biofilm (cell counts, taxonomic composition, and heterotrophic activity) using a wide range of techniques, with some of them used for the first time on plastics. Our experimental setup using aquariums with natural circulating seawater during 6 weeks allowed us to characterize the successive phases of primo-colonization, growing, and maturation of the biofilms. We highlighted different trends between polymer types with distinct surface properties and composition, the biodegradable AA-OXO and PHBV presenting higher colonization by active and specific bacteria compared to non-biodegradable polymers (PE and OXO). Succession of bacterial population occurred during the three colonization phases, with hydrocarbonoclastic bacteria being highly abundant on all plastic types. This study brings original data that provide new insights on the colonization of non-biodegradable and biodegradable polymers by marine microorganisms.

Changes in the starch-protein interface depending on common wheat grain hardness revealed using atomic force microscopy.

The atomic force microscope tip was used to progressively abrade the surface of non-cut starch granules embedded in the endosperm protein matrix in grain sections from wheat near-isogenic lines differing in the puroindoline b gene and thus, hardness. In the hard near-isogenic wheat lines, starch granules exhibited two distinct profiles corresponding either to abrasion in the surrounding protein layer or the starch granule. An additional profile, only identified in soft lines, revealed a marked stop in the abrasion at the protein-starch transition similar to a lipid interface playing a lubricant role. It was related to the presence of both wild-type puroindolines, already suggested to act at the starch-protein interface through their association with polar lipids. This study revealed, for the first time, in situ differences in the nano-mechanical properties at the starch-protein interface in the endosperm of wheat grains depending on the puroindoline allelic status.